IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Let the TLS TX recycle pool be more flexible in size, by continuously
and dynamically allocating and releasing HW resources in response to
changes in the connections rate and load.
Allocate and release pool entries in bulks (16). Use a workqueue to
release/allocate in the background. Allocate a new bulk when the pool
size goes lower than the low threshold (1K). Symmetric operation is done
when the pool size gets greater than the upper threshold (4K).
Every idle pool entry holds: 1 TIS, 1 DEK (HW resources), in addition to
~100 bytes in host memory.
Start with an empty pool to minimize memory and HW resources waste for
non-TLS users that have the device-offload TLS enabled.
Upon a new request, in case the pool is empty, do not wait for a whole bulk
allocation to complete. Instead, trigger an instant allocation of a single
resource to reduce latency.
Performance tests:
Before: 11,684 CPS
After: 16,556 CPS
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The transport interface send (TIS) object is responsible for performing
all transport related operations of the transmit side. The ConnectX HW
uses a TIS object to save and access the TLS crypto information and state
of an offloaded TX kTLS connection.
Before this patch, we used to create a new TIS per connection and destroy
it once it’s closed. Every create and destroy of a TIS is a FW command.
Same applies for the private TLS context, where we used to dynamically
allocate and free it per connection.
Resources recycling reduce the impact of the allocation/free operations
and helps speeding up the connection rate.
In this feature we maintain a pool of TX objects and use it to recycle
the resources instead of re-creating them per connection.
A cached TIS popped from the pool is updated to serve the new connection
via the fast-path HW interface, updating the tls static and progress
params. This is a very fast operation, significantly faster than FW
commands.
On recycling, a WQE fence is required after the context params change.
This guarantees that the data is sent after the context has been
successfully updated in hardware, and that the context modification
doesn't interfere with existing traffic.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let the caller of mlx5e_ktls_tx_handle_ooo() take care of updating the
stats, according to the returned value. As the switch/case blocks are
already there, this change saves unnecessary branches in the handler.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS TIS objects have a defined role in mapping and reaching the HW TLS
contexts. Some standard TIS attributes (like LAG port affinity) are
not relevant for them.
Use a dedicated TLS TIS create function instead of the generic
mlx5e_create_tis.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the function declaration of mlx5e_init_l2_addr to en/fs.h, rename
to mlx5e_fs_init_l2_addr to align with the fs API functions naming
convention and let it take mlx5e_flow_steering as arguments while keeping
implementation at en_fs.c file. This helps maintain a clean driver code
and avoids unnecessary dependencies.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add inner callee for ndo mlx5e_vlan_rx_add_vid and
mlx5e_vlan_rx_kill_vid, to separate the priv usage from other
flow steering flows.
Move wrapper ndo's into en_main, and split the rest of the functionality
into a separate part inside en_fs.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Separate mlx5e_set_rx_mode into two, and move caller to en_main while
keeping implementation in en_fs in the newly declared function
mlx5e_fs_set_rx_mode. This; to minimize the coupling of flow_steering
to priv.
Add a parallel boolean member vlan_strip_disable to
mlx5e_flow_steering that's updated similarly as its identical in priv,
thus making it possible to adjust the rx_mode work handler to current
changes.
Also, add state_destroy boolean to mlx5e_flow_steering struct which
replaces the old check : !test_bit(MLX5E_STATE_DESTROYING, &priv->state).
This state member is updated accordingly prior to
INIT_WORK(mlx5e_set_rx_mode_work), This is done for similar purposes as
mentioned earlier and to minimize argument passings.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Make flow_steering struct contain mlx5_core_dev such that
it becomes self contained and easier to decouple later on this series.
Let its values be initialized in mlx5e_fs_init().
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Let en_fs report errors via mdev error report API, aka mlx5_core_*
macros, thus replace the netdev API reports.
This to minimize netdev coupling to the flow steering struct.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Make mlx5e_flow_steering member of mlx5e_priv a pointer.
Add dynamic allocation respectively.
Allocate fs for all profiles when initializing profile,
symmetrically deallocate at profile cleanup.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Introduce allocation and de-allocation functions for both flow steering
VLAN and TC as part of fs API.
Add allocations of VLAN and TC as nic profile feature, such that
fs_init() will allocate both VLAN and TC only if they're featured in
the profile. VLAN and TC are relevant for nic_profile only.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move mlx5e_tc_table struct to en_tc.c thus make it private.
Introduce allocation and deallocation functions as part of the tc API
to allow this switch smoothly.
Convert mlx5e_nic_chain() macro to a function of en_tc.c.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Make fs.tc be a pointer and allocate it dynamically.
Add mlx5e_priv pointer to mlx5e_tc_table, and thus get a work-around to
accessing priv via tc when handling tc events inside mlx5e_tc_netdev_event.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for tc action api for police.
Offloading standalone police action without
a tc rule and reporting stats.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5e_tc_meter_get() to get an existing meter.
mlx5e_tc_meter_update() to update an existing meter without refcount.
mlx5e_tc_meter_replace() to get/create a meter and update if needed.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add red and green counters per meter instance.
TC police action is implemented as a meter instance.
The meter counters represent the police action
notexceed/exceed counters.
TC rules using the same meter instance will use
the same counters.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To support a TC police action notexceed counter and supporting
actions other than drop/pipe there is a need to create separate ft
and rules per rule and not to use a common one created on eswitch init.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for ASO action of type flow metering
on device that supports STEv1.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Hamdan Igbaria <hamdani@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use skb_inner_tcp_all_headers() instead of skb_tcp_all_headers() when
transmitting an encapsulated packet in mlx5e_tx_get_gso_ihs().
Fixes: 504148fedb85 ("net: add skb_[inner_]tcp_all_headers helpers")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, driver is setting default values to all timeouts during
function setup. The offending commit is using a timeout before
function setup, meaning: the timeout is 0 (or garbage), since no
value have been set.
This may result in failure to probe the driver:
mlx5_function_setup:1034:(pid 69850): Firmware over 4294967296 MS in pre-initializing state, aborting
probe_one:1591:(pid 69850): mlx5_init_one failed with error code -16
Hence, set default values to timeouts during tout_init()
Fixes: 37ca95e62ee2 ("net/mlx5: Increase FW pre-init timeout for health recovery")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix several issues in SMFS steering info dump:
- Fix outdated macro value for matcher mask in the SMFS debug dump format.
The existing value denotes the old format of the matcher mask, as it was
used during the early stages of development, and it results in wrong
parsing by the steering dump parser - wrong fields are shown in the
parsed output.
- Add the missing destination table to the dumped action.
The missing dest table handle breaks the ability to associate between
the "go to table" action and the actual table in the steering info.
Fixes: 9222f0b27da2 ("net/mlx5: DR, Add support for dumping steering info")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit limited log_max_qp to be 17 due to FW capabilities.
Recently, it turned out that there are old FW versions that supported
more than 17, so the cited commit caused a degradation.
Thus, set the maximum log_max_qp back to 18 as it was before the
cited commit.
Fixes: 7f839965b2d7 ("net/mlx5: Update log_max_qp value to be 17 at most")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
While extending available range of supported chains/prios referenced commit
also modified slow path rules to go to FT chain instead of actual slow FDB.
However neither of existing users of the MLX5_ATTR_FLAG_SLOW_PATH
flag (tunnel encap entries with invalid encap and flows with trap action)
need to match on FT chain. After bridge offload was implemented packets of
such flows can also be matched by bridge priority tables which is
undesirable. Restore slow path flows implementation to redirect packets to
slow_fdb.
Fixes: 278d51f24330 ("net/mlx5: E-Switch, Increase number of chains and priorities")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Before commit 76c31e5f7585 ("net/mlx5e: Use FW limitation for max MPW
WQEBBs"), the maximum size of MPWQE in WQEBBs was hardcoded as a driver
constant. That commit started using the firmware capability that can
further limit the size, however, it unintentionally changed a few
things:
1. The calculation of MLX5E_MAX_KLM_PER_WQE used the size in DS, which
was replaced by the size in WQEBBs, making the resulting value 4 times
smaller.
2. MLX5E_TX_MPW_MAX_WQEBBS used to be aligned to the cache line size
(either 64 or 128 bytes, i.e. 1 or 2 WQEBBs), but it's no longer the
case if the firmware capability is smaller than the driver maximum.
Fix both issues by using the correct units for MLX5E_MAX_KLM_PER_WQE and
by aligning mlx5e_get_sw_max_sq_mpw_wqebbs after taking the minimum.
Besides fixing the arithmetics in calculation of MLX5E_MAX_KLM_PER_WQE,
also use appropriate constants: `size of BSF * num of DS per WQEBB *
number of WQEBBs` (the calculation before the blamed commit) doesn't
make much sense to calculate the WQE size in bytes, so just use `size of
WQEBB * number of WQEBBs`.
While at it, replace the types that hold the number of WQEBBs by u8.
These values don't exceed 16, and it allows to fill holes in two
structs.
Fixes: 76c31e5f7585 ("net/mlx5e: Use FW limitation for max MPW WQEBBs")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
ICOSQ is used to post UMR WQEs for both regular RQ and XSK RQ. However,
space in ICOSQ is reserved only for the regular RQ, which may cause
ICOSQ overflows when using XSK (the most risk is on activating
channels).
This commit fixes the issue by reserving space for XSK UMR WQEs as well.
As XSK may be enabled without restarting the channel and recreating the
ICOSQ, this space is reserved unconditionally.
Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
MLX5E_MAX_RQ_NUM_MTTS should be the maximum value, so that
MLX5_MTT_OCTW(MLX5E_MAX_RQ_NUM_MTTS) fits into u16. The current value of
1 << 17 results in MLX5_MTT_OCTW(1 << 17) = 1 << 16, which doesn't fit
into u16. This commit replaces it with the maximum value that still
fits u16.
Fixes: 73281b78a37a ("net/mlx5e: Derive Striding RQ size from MTU")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit changed CT to use multi table actions post act infrastructure instead
of using it own post act infrastructure, this broke decap during VF tunnel offload
(Stack devices) with CT due to wrong match on in_port metadata in the post act table.
This changed only broke VF tunnel offload because it modify the packet in_port metadata
to be VF metadata and it isn't propagate the post act creation.
Fixed by modify post act rules to match only on fte_id and not match on in_port metadata
which isn't needed.
Fixes: a81283263bb0 ("net/mlx5e: Use multi table support for CT and sample actions")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The driver reports whether TX/RX TLS device offloads are supported, but
not which ciphers/versions, these should be handled by returning
-EOPNOTSUPP when .tls_dev_add() is called.
Remove the WARN_ON kernel trace when the driver gets a request to
offload a cipher/version that is not supported as it is expected.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for NETIF_F_LOOPBACK. This feature can be set via:
$ ethtool -K eth0 loopback <on|off>
Feature can be useful for local data path tests.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Instead of rather verbose comparison of current netdev->features bits vs
the incoming ones from user, let us compress them by a helper features
set that will be the result of netdev->features XOR features. This way,
current, extensive branches:
if (features & NETIF_F_BIT && !(netdev->features & NETIF_F_BIT))
set_feature(true);
else if (!(features & NETIF_F_BIT) && netdev->features & NETIF_F_BIT)
set_feature(false);
can become:
netdev_features_t changed = netdev->features ^ features;
if (changed & NETIF_F_BIT)
set_feature(!!(features & NETIF_F_BIT));
This is nothing new as currently several other drivers use this
approach, which I find much more convenient.
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When trust is turned off for the VF, the expectation is that promiscuous
and allmulticast filters are removed. Currently default VSI filter is not
getting cleared in this flow.
Example:
ip link set enp236s0f0 vf 0 trust on
ip link set enp236s0f0v0 promisc on
ip link set enp236s0f0 vf 0 trust off
/* promiscuous mode is still enabled on VF0 */
Remove switch filters for both cases.
This commit fixes above behavior by removing default VSI filters and
allmulticast filters when vf-true-promisc-support is OFF.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In current implementation default VSI switch filter is only able to
forward traffic to a single VSI. This limits promiscuous mode with
private flag 'vf-true-promisc-support' to a single VF. Enabling it on
the second VF won't work. Also allmulticast support doesn't seem to be
properly implemented when vf-true-promisc-support is true.
Use standard ice_add_rule_internal() function that already implements
forwarding to multiple VSI's instead of constructing AQ call manually.
Add switch filter for allmulticast mode when vf-true-promisc-support is
enabled. The same filter is added regardless of the flag - it doesn't
matter for this case.
Remove unnecessary fields in switch structure. From now on book keeping
will be done by ice_add_rule_internal().
Refactor unnecessarily passed function arguments.
To test:
1) Create 2 VM's, and two VF's. Attach VF's to VM's.
2) Enable promiscuous mode on both of them and check if
traffic is seen on both of them.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The 82576 PTP implementation still uses .adjfreq instead of using the newer
.adjfine.
This implementation uses a pre-simplified calculation since the base
increment value for the 82576 is just 16 * 2^19. Converting this into
scaled_ppm is tricky, and makes the intent a bit less clear.
Simply convert to the normal flow of multiplying the base increment value
by the scaled_ppm and then dividing by 1000000ULL << 16. This can be
implemented using mul_u64_u64_div_u64 which can avoid the possible overflow
that might occur for large adjustments.
Use of .adjfine can improve the precision of small adjustments and gets us
one driver closer to removing the old implementation from the kernel
entirely.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Convert the ixgbe PTP frequency adjustment implementations from .adjfreq to
.adjfine. This allows using the scaled parts per million adjustment from
the PTP core and results in a more precise adjustment for small
corrections.
To avoid overflow, use mul_u64_u64_div_u64 to perform the calculation. On
X86 platforms, this will use instructions that perform the operations with
128bit intermediate values. For other architectures, the implementation
will limit the loss of precision as much as possible.
This change slightly improves the precision of frequency adjustments for
all ixgbe based devices, and gets us one driver closer to being able to
remove the older .adjfreq implementation from the kernel.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The i40e driver currently implements the .adjfreq handler for frequency
adjustments. This takes the adjustment parameter in parts per billion. The
PTP core supports .adjfine which provides an adjustment in scaled parts per
million. This has a higher resolution and can result in more precise
adjustments for small corrections.
Convert the existing .adjfreq implementation to the newer .adjfine
implementation. This is trivial since it just requires changing the divisor
from 1000000000ULL to (1000000ULL << 16) in the mul_u64_u64_div_u64 call.
This improves the precision of the adjustments and gets us one driver
closer to removing the old .adjfreq support from the kernel.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The i40e device has a different clock rate depending on the current link
speed. This requires using a different increment rate for the PTP clock
registers. For slower link speeds, the base increment value is larger.
Directly multiplying the larger increment value by the parts per billion
adjustment might overflow.
To avoid this, the i40e implementation defaults to using the lower
increment value and then multiplying the adjustment afterwards. This causes
a loss of precision for lower link speeds.
We can fix this by using mul_u64_u64_div_u64 instead of performing the
multiplications using standard C operations. On X86, this will use special
instructions that perform the multiplication and division with 128bit
intermediate values. For other architectures, the fallback implementation
will limit the loss of precision for large values. Small adjustments don't
overflow anyways and won't lose precision at all.
This allows first multiplying the base increment value and then performing
the adjustment calculation, since we no longer fear overflowing. It also
makes it easier to convert to the even more precise .adjfine implementation
in a following change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The PTP implementation for the e1000e driver uses the older .adjfreq
method. This method takes an adjustment in parts per billion. The newer
.adjfine implementation uses scaled_ppm. The use of scaled_ppm allows for
finer grained adjustments and is preferred over using the older
implementation.
Make use of mul_u64_u64_div_u64 in order to handle possible overflow of the
multiplication used to calculate the desired adjustment to the hardware
increment value.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The e1000e_phc_adjfreq function validates that the input delta is within
the maximum range. This is already handled by the core PTP code and this is
a duplicate and thus unnecessary check. It also complicates refactoring to
use the newer .adjfine implementation, where the input is no longer
specified in parts per billion. Remove the range validation check.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The PTP frequency adjustment code needs to determine an appropriate
adjustment given an input scaled_ppm adjustment.
We calculate the adjustment to the register by multiplying the base
(nominal) increment value by the scaled_ppm and then dividing by the
scaled one million value.
For very large adjustments, this might overflow. To avoid this, both the
scaled_ppm and divisor values are downshifted.
We can avoid that on X86 architectures by using mul_u64_u64_div_u64. This
helper function will perform the multiplication and division with 128bit
intermediate values. We know that scaled_ppm is never larger than the
divisor so this operation will never result in an overflow.
This improves the accuracy of the calculations for large adjustment values
on X86. It is likely an improvement on other architectures as well because
the default implementation of mul_u64_u64_div_u64 is smarter than the
original approach taken in the ice code.
Additionally, this implementation is easier to read, using fewer local
variables and lines of code to implement.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If mediatek_dwmac_clks_config() fails, then call stmmac_remove_config_dt()
before returning. Otherwise it is a resource leak.
Fixes: fa4b3ca60e80 ("stmmac: dwmac-mediatek: fix clock issue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuJ4aZyMUlG6yGGa@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use correct vendor for Xilinx versions of Cadence MACB/GEM Ethernet
controller. The Versal compatible was not released, so it can be
changed. Zynq-7xxx and Ultrascale+ has to be kept in new and deprecated
form.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/20220726070802.26579-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current implementation of fun_xdp_tx(), used for XPD_TX, is
incorrect in that it takes an address/length pair and later releases it
with page_frag_free(). It is OK for XDP_TX but the same code is used by
ndo_xdp_xmit. In that case it loses the XDP memory type and releases the
packet incorrectly for some of the types. Assorted breakage follows.
Change fun_xdp_tx() to take xdp_frame and rely on xdp_return_frame() in
reclaim.
Fixes: db37bc177dae ("net/funeth: add the data path")
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Link: https://lore.kernel.org/r/20220726215923.7887-1-dmichail@fungible.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In case of buggy firmware, brcmfmac may perform a hardware reset. If during
reset and subsequent probing an early failure occurs, a memory region is
accidentally double-freed. With hardened memory allocation enabled, this error
will be detected.
- return early where appropriate to skip unnecessary clean-up.
- set '.freezer' pointer to NULL to prevent double-freeing under possible
other circumstances and to re-align result under various different
behaviors of memory allocation freeing.
- correctly claim host on func1 for disabling func2.
- after reset, do not initiate probing immediately, but rely on events.
Given a firmware crash, function 'brcmf_sdio_bus_reset' is called. It calls
'brcmf_sdiod_remove', then follows up with 'brcmf_sdiod_probe' to reinitialize
the hardware. If 'brcmf_sdiod_probe' fails to "set F1 blocksize", it exits
early, which includes calling 'brcmf_sdiod_remove'. In both cases
'brcmf_sdiod_freezer_detach' is called to free allocated '.freezer', which
has not yet been re-allocated the second time.
Stacktrace of (failing) hardware reset after firmware-crash:
Code: b9402b82 8b0202c0 eb1a02df 54000041 (d4210000)
ret_from_fork+0x10/0x20
kthread+0x154/0x160
worker_thread+0x188/0x504
process_one_work+0x1f4/0x490
brcmf_core_bus_reset+0x34/0x44 [brcmfmac]
brcmf_sdio_bus_reset+0x68/0xc0 [brcmfmac]
brcmf_sdiod_probe+0x170/0x21c [brcmfmac]
brcmf_sdiod_remove+0x48/0xc0 [brcmfmac]
kfree+0x210/0x220
__slab_free+0x58/0x40c
Call trace:
x2 : 0000000000000040 x1 : fffffc00002d2b80 x0 : ffff00000b4aee40
x5 : ffff8000013fa728 x4 : 0000000000000001 x3 : ffff00000b4aee00
x8 : ffff800009967ce0 x7 : ffff8000099bfce0 x6 : 00000006f8005d01
x11: ffff8000099bfce0 x10: 00000000fffff000 x9 : ffff8000083401d0
x14: 0000000000000000 x13: 657a69736b636f6c x12: 6220314620746573
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000030
x20: fffffc00002d2ba0 x19: fffffc00002d2b80 x18: 0000000000000000
x23: ffff00000b4aee00 x22: ffff00000b4aee00 x21: 0000000000000001
x26: ffff00000b4aee00 x25: ffff0000f7753705 x24: 000000000001288a
x29: ffff80000a22bbf0 x28: ffff000000401200 x27: 000000008020001a
sp : ffff80000a22bbf0
lr : kfree+0x210/0x220
pc : __slab_free+0x58/0x40c
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
Workqueue: events brcmf_core_bus_reset [brcmfmac]
Hardware name: Pine64 Pinebook Pro (DT)
CPU: 2 PID: 639 Comm: kworker/2:2 Tainted: G C 5.16.0-0.bpo.4-arm64 #1 Debian 5.16.12-1~bpo11+1
nvmem_rockchip_efuse industrialio_triggered_buffer videodev snd_soc_core snd_pcm_dmaengine kfifo_buf snd_pcm io_domain mc industrialio mt>
Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reje>
Internal error: Oops - BUG: 0 [#1] SMP
kernel BUG at mm/slub.c:379!
Signed-off-by: Danny van Heumen <danny@dannyvanheumen.nl>
Reviewed-by: Arend van Spriel <aspriel.gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/id1HN6qCMAirApBzTA6fT7ZFWBBGCJhULpflxQ7NT6cgCboVnn3RHpiOFjA9SbRqzBRFLk9ES0C4FNvO6fUQsNg7pqF6ZSNAYUo99nHy8PY=@dannyvanheumen.nl
Commit a21bf90e927f ("brcmfmac: use ISO3166 country code and 0 rev as
fallback on some devices") introduced a fallback mechanism whereby a
trivial mapping from ISO3166 country codes to firmware country code and
revision is used on some devices. This fallback operates on the device
level, so it is enabled only for certain supported chipsets.
In general though, the firmware country codes are determined by the CLM
blob, which is board-specific and may vary despite the underlying
chipset being the same.
The aforementioned commit is actually a refinement of a previous commit
that was reverted in commit 151a7c12c4fc ("Revert "brcmfmac: use ISO3166
country code and 0 rev as fallback"") due to regressions with a BCM4359
device. The refinement restricted the fallback mechanism to specific
chipsets such as the BCM4345.
We use a chipset - CYW88359 - that the driver identifies as a BCM4359
too. But in our case, the CLM blob uses ISO3166 country codes
internally, and all with revision 0. So the trivial mapping is exactly
what is needed in order for the driver to sync the kernel regulatory
domain to the firmware. This is just a matter of how the CLM blob was
prepared by the hardware vendor. The same could hold for other boards
too.
Although the brcm,ccode-map device tree property is useful for cases
where the mapping is more complex, the trivial case invites a much
simpler specification. This patch adds support for parsing the
brcm,ccode-map-trivial device tree property. Subordinate to the more
specific brcm,ccode-map property, this new proprety simply informs the
driver that the fallback method should be used in every case.
In the absence of the new property in the device tree, expect no
functional change.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220711123005.3055300-3-alvin@pqrs.dk
On some boards there is no eeprom to hold the nvram, in this case instead
a board specific nvram is loaded from /lib/firmware. On most boards the
macaddr=... setting in the /lib/firmware nvram file is ignored because
the wifi/bt chip has a unique MAC programmed into the chip itself.
But in some cases the actual MAC from the /lib/firmware nvram file gets
used, leading to MAC conflicts.
The MAC addresses in the troublesome nvram files seem to all come from
the same nvram file template, so we can detect this by checking for
the template nvram file MAC.
Detect that the default MAC address is being used and replace it
with a random MAC address to avoid MAC address conflicts.
Note that udev will detect this is a random MAC based on
/sys/class/net/wlan0/addr_assign_type and then replace this with
a MAC based on hashing the netdev-name + the machine-id. So that
the MAC address is both guaranteed to be unique per machine while
it is still the same/persistent at each boot (assuming the
default Link.MACAddressPolicy=persistent udev setting).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220708133712.102179-2-hdegoede@redhat.com
Add a little helper to send "cur_etheraddr" commands to the interface
and to handle the error reporting of it in a single place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Arend van Spriel <aspriel@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220708133712.102179-1-hdegoede@redhat.com
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.
Some other functions not directly called by the .suspend/.resume
callbacks, but still related to PM were also taken outside #ifdef
guards.
The advantage is then that these functions are now always compiled
independently of any Kconfig option, and thanks to that bugs and
regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220627193701.31074-1-paul@crapouillou.net
The for loop in brcmf_of_probe() would ideally end with something like
"i <= strlen(board_type)" instead of "i < board_type[i]". But
fortunately, the two are equivalent.
Anyway, it's simpler to use strreplace() instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/YqrhsKcjEA7B2pC4@kili
