IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.
The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.
The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.
Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.
SPI5 was accidentally enabled by default on SM6115, and is disabled
again.
CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.
The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.
Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.
The UFS controller is marked cache coherent on SM8350 and SM8450.
The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.
The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.
-----BEGIN PGP SIGNATURE-----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=9sTC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fCbE
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes
Qualcomm ARM64 Devicetree fixes for v6.3
This correct SIM card selection on the two newly introduced
MSM8916-based USB modems.
The firmware-name for the first CDSP is corrected on the SA8540P Ride
board.
The PCIe controller in SC7280 is marked cache-coherent, which resolves
seen data corruption issues.
Labels are added to the vadc channel nodes on SC8280XP, as the Linux
driver was updated to not include the unit address when generating
device names and collisions thereby prevented registration of the
channels. Audio clocks and routing is corrected and a few regulators are
marked always-on for the Lenovo Thinkpad X13s, as their clients are not
fully described at this point.
SPI5 was accidentally enabled by default on SM6115, and is disabled
again.
CDSP on SM6375 is provided its power-domains, to appropriately vote for
during power up for the DSP.
The iommu mask for the PCIe controllers in SM8150 is updated, to match
what the hypervisor expects.
Th Venus firmware path is corrected on Xiaomi Mi Pad 5 Pro.
The UFS controller is marked cache coherent on SM8350 and SM8450.
The clocks for the second WSA macro on SM8450 is corrected, and given
its own clocks.
The bias-pull-up value for I2C pins are corrected on SM8550, to trigger
the selection of the strong pull. CPU compatibles and the base address
of the LPASS TLMM block are corrected.
* tag 'qcom-arm64-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing
arm64: dts: qcom: sc8280xp-x13s: fix dmic sample rate
arm64: dts: qcom: sc8280xp: fix lpass tx macro clocks
arm64: dts: qcom: sc8280xp: fix rx frame shapping info
arm64: dts: qcom: sm8450: correct WSA2 assigned clocks
arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent
arm64: dts: qcom: msm8916-ufi: Fix sim card selection pinctrl
arm64: dts: qcom: sm8250-xiaomi-elish: Correct venus firmware path
arm64: dts: qcom: sm8550: Use correct CPU compatibles
arm64: dts: qcom: sm8550: Add bias pull up value to tlmm i2c data clk states
arm64: dts: qcom: sm6375: Add missing power-domain-named to CDSP
...
Link: https://lore.kernel.org/r/20230323141642.1085684-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The bob supply is used by several pmic regulators and components which
are not (yet fully) described in the devicetree.
Mark the regulator as always-on for now.
Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-5-johan+linaro@kernel.org
The s12b supply is used by several pmic regulators as well as the
wlan/bluetooth radio which are not yet fully described in the
devicetree.
Mark the regulator as always-on for now.
Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-4-johan+linaro@kernel.org
The s10b supply is used by several components that are not (yet)
described in devicetree (e.g. ram, charger, ec) and must not be
disabled.
Mark the regulator as always-on.
Fixes: f29077d86652 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-3-johan+linaro@kernel.org
The s11b supply is used by the wlan module (as well as some of the
pmics) which are not yet fully described in the devicetree.
Mark the regulator as always-on for now.
Fixes: 123b30a75623 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230322113318.17908-2-johan+linaro@kernel.org
- A couple of i.MX93 fixes from Alexander Stein to correct EQoS Ethernet
properties.
- Correct clock-names of FlexSPI device in imx8-ss-lsio DT.
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property and
switch to the new bindings.
- Fix an issue with imx-weim bus driver that branch condition evaluates
to a garbage value.
- Correct WM8960 clock name for imx8mm-nitrogen-r2 board.
- Fix LCDIF2 clocks for i.MX8MP DT.
- Add missing #sound-dai-cells properties to SAI nodes for i.MX8MN DT.
- Revert LS1028A DT changes of getting MAC addresses from VPD, as the
dependency on NVMEM device is not in place.
- A series from Peng Fan to add missing pinctrl property for i.MX6SL
based devices.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQRxqUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5fJgf/b9gDwsdBW/u4p7cxo57u5kwxw7b4
YynKjsobP9T/ZQCak9lGPHDQGUkMoWHvHgU9xghjHfcNSX41i7KJgcbluk5YbEtw
gcDvq0lUUT+lJzH2C7HlgwUjp2zWb84DZb4byyHTxcJK6my8RMQ6WtCONVwxrbv4
yJkXjzeXcV1jP2P+isSpG82zpMTkQaDQaV8/fEWPhfm0zXYhTY13tRdA20knaMyS
lEzfq/IG9Ikgh3Ho4WoMIGCz3ZZJqCDjLYFH+i6kh1XWILyUkVvnSbyueRJCIYCT
1dGsM/DKBADWL3frSGS6HbnlCOGdk3EOfGpRsLKZhbpEqqeAbyPHDL3X6A==
=qjnx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmQUexcACgkQmmx57+YA
GNlIcw/8DlXyxwvH/mzjD82G3o/csNxSfzFAsjfGmqWQBEVGfDbNITvyMQXijTz6
LVy1Ds09N5RHIdgeqNkhEtzE3vbw/ecJ2/0LxHWWaACh+rADJdUH8G62JVVycC6O
RGoXpG1gjuC3gaLJvVBDCPOrcMJpLbwASsjxMrUqBSmduir/uHA71pGTBIYMwhV+
pwvzl/S1BDKZLOjLTsWbWmS/VPXhPV3pXpzIwVRuN0MVL4AbqyxWcGcddewBQ5HZ
qrO4Nj0aWPqiXRVUChOEkuX8Zp3V0p+hQdLnenuPhkmSrN0eLfkqwJD1qMcj5qhq
/eGGY4Jtv44aoynpG08U6ISl10SsJICUzAeYHDD51+JCzeg4wytvTiOZYqdGSaor
jA8Y4hDRfo4WPFuybId5DcEGOMvS/iRw9Sry6vcGyasYT9Otp6QxiKRv8CdnYSWM
HsmRMBAD1ROLwMy1yhKin685NRj26QWF8K9pUFi6gS9VHrBk+ar0eA704s8Lz7j9
krytZ8DEPc0tGGjKiCGzXVJ3RwYbIGYg7FeTlOKLbkRJbRr7k5dzao1UlSHJkq6q
ExlcV4RKjvTHI7ZaOzHGovgOVS1lj23dBiYwkf2EO28eaoo0HnAyghusEkfIS3rY
mkax4BTKrpbJ28Dp2/7hCp3/DgTF27GTHClaF9kqbkC2gxy6TPA=
=1O1H
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc-fixes
i.MX fixes for 6.3:
- A couple of i.MX93 fixes from Alexander Stein to correct EQoS Ethernet
properties.
- Correct clock-names of FlexSPI device in imx8-ss-lsio DT.
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property and
switch to the new bindings.
- Fix an issue with imx-weim bus driver that branch condition evaluates
to a garbage value.
- Correct WM8960 clock name for imx8mm-nitrogen-r2 board.
- Fix LCDIF2 clocks for i.MX8MP DT.
- Add missing #sound-dai-cells properties to SAI nodes for i.MX8MN DT.
- Revert LS1028A DT changes of getting MAC addresses from VPD, as the
dependency on NVMEM device is not in place.
- A series from Peng Fan to add missing pinctrl property for i.MX6SL
based devices.
* tag 'imx-fixes-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
bus: imx-weim: fix branch condition evaluates to a garbage value
arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
arm64: dts: imx93: Fix eqos properties
arm64: dts: imx8mp: Fix LCDIF2 node clock order
arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD"
arm64: dts: freescale: imx8-ss-lsio: Fix flexspi clock order
Link: https://lore.kernel.org/r/20230315132814.GF143566@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains a fix for the CBB bus' ranges property on Tegra194 and
Tegra234 that restores proper translation of PCI addresses.
-----BEGIN PGP SIGNATURE-----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=37uO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=n0So
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.3-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc-fixes
arm64: tegra: Device tree fixes for v6.3-rc1
This contains a fix for the CBB bus' ranges property on Tegra194 and
Tegra234 that restores proper translation of PCI addresses.
* tag 'tegra-for-6.3-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Bump CBB ranges property on Tegra194 and Tegra234
Link: https://lore.kernel.org/r/20230302094213.3874449-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add them to the SoC .dtsi, so that not every board has to specify them.
Fixes: 1225396fefea ("arm64: dts: imx93: add lpi2c nodes")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #sound-dai-cells properties to SAI nodes.
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes: 9e9860069725 ("arm64: dts: imx8mn: Add SAI nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'macirq' is supposed to be listed first. Also only 'snps,clk-csr' is
listed in the bindings while 'clk_csr' is only supported for legacy
reasons. See commit 83936ea8d8ad2 ("net: stmmac: add a parse for new
property 'snps,clk-csr'")
Fixes: 1f4263ea6a4b ("arm64: dts: imx93: add eqos support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'axi' clock are the bus APB clock, the 'disp_axi' clock are the
pixel data AXI clock. The naming is confusing. Fix the clock order.
Fixes: 94e6197dadc9 ("arm64: dts: imx8mp: Add LCDIF2 & LDB nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The WM8960 Linux driver expects the clock to be named "mclk". Otherwise
the clock will be ignored and not prepared/enabled by the driver.
Fixes: 40ba2eda0a7b ("arm64: dts: imx8mm-nitrogen-r2: add audio")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:
./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml
Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.
Fixes: 8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The UFS controller on SM8550 supports cache coherency, hence add the
"dma-coherent" property to mark it as such.
Fixes: 35cf1aaab169 ("arm64: dts: qcom: sm8550: Add UFS host controller and phy nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308054630.7202-1-manivannan.sadhasivam@linaro.org
The cdsp.mbn firmware that's referenced in sa8540p-ride.dts is actually
named cdsp0.mbn in the deliverables from Qualcomm. Let's go ahead and
correct the name to match what's in Qualcomm's deliverable.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307232340.2370476-1-bmasney@redhat.com
The second LPASS pin controller IO address is supposed to be the MCC
range which contains the slew rate registers. The Linux driver then
accesses slew rate register with hard-coded offset (0xa000). However
the DTS contained the address of slew rate register as the second IO
address, thus any reads were effectively pass the memory space and lead
to "Internal error: synchronous external aborts" when applying pin
configuration.
Fixes: 6de7f9c34358 ("arm64: dts: qcom: sm8550: add GPR and LPASS pin controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302154724.856062-1-krzysztof.kozlowski@linaro.org
VA dmics 0, 1, 2 micbias on X13s are connected to WCD MICBIAS1, WCD MICBIAS1
and WCD MICBIAS3 respectively. Reflect this in dt to get dmics working.
Also fix dmics to go via VA Macro instead of TX macro to fix device switching.
Fixes: 8c1ea87e80b4 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302115741.7726-5-srinivas.kandagatla@linaro.org
The version of dmic that is on X13s panel supports clock frequency
of range 1 Mhz to 4.8 MHz for normal operation.
So correct the existing node to reflect this.
Fixes: 8c1ea87e80b4 ("arm64: dts: qcom: sc8280xp-x13s: Add soundcard support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302115741.7726-4-srinivas.kandagatla@linaro.org
Tx macro soundwire clock is for some reason is incorrectly assigned to
va macro, fix this and use tx macro clock instead.
Fixes: 1749a8ae49a3 ("arm64: dts: qcom: sc8280xp: add SoundWire and LPASS")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302115741.7726-3-srinivas.kandagatla@linaro.org
The WSA2 assigned-clocks were copied from WSA, but the WSA2 uses its
own.
Fixes: 14341e76dbc7 ("arm64: dts: qcom: sm8450: add Soundwire and LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308123129.232642-1-krzysztof.kozlowski@linaro.org
If the controller is not marked as cache coherent, then kernel will
try to ensure coherency during dma-ops and that may cause data corruption.
So, mark the PCIe node as dma-coherent as the devices on PCIe bus are
cache coherent.
Cc: stable@vger.kernel.org
Fixes: 92e0ee9f83b3 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related node")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1677584952-17496-1-git-send-email-quic_krichai@quicinc.com
The previous commit mistakenly introduced sim_ctrl_default as pinctrl,
this is incorrect, the interface for sim card selection varies between
different devices and should not be placed in the dtsi.
This commit selects external SIM card slot for ufi001c as default.
uf896 selects the correct SIM card slot automatically, thus does not need
this pinctrl node.
Fixes: faf69431464b ("arm64: dts: qcom: msm8916-thwc: Add initial device trees")
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/tencent_7036BCA256055D05F8C49D86DF7F0E2D1A05@qq.com
Missing vendor name for venus firmware path. Add it.
Fixes: a41b617530bf ("arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 Pro")
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230221123633.25145-1-lujianhua000@gmail.com
Use the correct compatibles for the four kinds of CPU cores used on
SM8550, based on the value of their MIDR_EL1 registers:
CPU7: 0x411fd4e0 - CX3 r1p1
CPU5-6: 0x412fd470 - CA710 r?p?
CPU3-4: 0x411fd4d0 - CA715 r?p?
CPU0-2: 0x411fd461 - CA510 r?p?
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230216110803.3945747-2-konrad.dybcio@linaro.org
The default bias pull up value for the tlmm i2c data clk states is
2.2kOhms. Add this value to make sure the driver factors in the i2c pull
up bit when writing the config register.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230209074510.4153294-2-abel.vesa@linaro.org
This was omitted when first introducing the node. Fix it.
Fixes: fe6fd26aeddf ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109135647.339224-5-konrad.dybcio@linaro.org
For uniquely identifying the vadc channels, label property has to be used.
The initial commit adding vadc support assumed that the driver will use the
unit address along with the node name to identify the channels. But this
assumption is now broken by,
commit 701c875aded8 ("iio: adc: qcom-spmi-adc5: Fix the channel name") that
stripped unit address from channel names. This results in probe failure of
the vadc driver:
[ 8.380370] iio iio:device0: tried to double register : in_temp_pmic-die-temp_input
[ 8.380383] qcom-spmi-adc5 c440000.spmi:pmic@0:adc@3100: Failed to register sysfs interfaces
[ 8.380386] qcom-spmi-adc5: probe of c440000.spmi:pmic@0:adc@3100 failed with error -16
Hence, let's get rid of the assumption about drivers and rely on label
property to uniquely identify the channels.
The labels are derived from the schematics for each PMIC. For internal adc
channels such as die and xo, the PMIC names are used as a prefix.
Fixes: 7c0151347401 ("arm64: dts: qcom: sc8280xp-x13s: Add PM8280_{1/2} ADC_TM5 channels")
Fixes: 9d41cd17394a ("arm64: dts: qcom: sc8280xp-x13s: Add PMR735A VADC channel")
Fixes: 3375151a7185 ("arm64: dts: qcom: sc8280xp-x13s: Add PM8280_{1/2} VADC channels")
Fixes: 9a6b3042c533 ("arm64: dts: qcom: sc8280xp-x13s: Add PMK8280 VADC channels")
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230211052415.14581-1-manivannan.sadhasivam@linaro.org
The iommu mask should be 0x3f as per Qualcomm internal documentation.
Without the correct mask, the PCIe transactions from the endpoint will
result in SMMU faults. Hence, fix it!
Cc: stable@vger.kernel.org # 5.19
Fixes: a1c86c680533 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230224080045.6577-1-manivannan.sadhasivam@linaro.org
With commit b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses
from VPD"), the network adapter now depends on the nvmem device to be
present, which isn't the case and thus breaks networking on this board.
Revert it.
Fixes: b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses from VPD")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The correct clock order is "fspi_en" and "fspi". As they are identical
just reordering the names is sufficient.
Fixes: 6276d66984e9 ("arm64: dts: imx8dxl: add flexspi0 support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- In copy_highpage(), only reset the tag of the destination pointer if
KASAN_HW_TAGS is enabled so that user-space MTE does not interfere
with KASAN_SW_TAGS (which relies on top-byte-ignore).
- Remove warning if SME is detected without SVE, the kernel can cope
with such configuration (though none in the field currently).
- In cfi_handler(), pass the ESR_EL1 value to die() for consistency with
other die() callers.
- Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte
manipulation from the generic vmemmap_remap_pte() does not follow the
required ARM break-before-make sequence (clear the pte, flush the
TLBs, set the new pte). It may be re-enabled once this sequence is
sorted.
- Fix possible memory leak in the arm64 ACPI code if the SMCCC version
and conduit checks fail.
- Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores
-falign-functions=N with -Os.
- Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no
randomisation would actually take place.
-----BEGIN PGP SIGNATURE-----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=jfPa
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- In copy_highpage(), only reset the tag of the destination pointer if
KASAN_HW_TAGS is enabled so that user-space MTE does not interfere
with KASAN_SW_TAGS (which relies on top-byte-ignore).
- Remove warning if SME is detected without SVE, the kernel can cope
with such configuration (though none in the field currently).
- In cfi_handler(), pass the ESR_EL1 value to die() for consistency
with other die() callers.
- Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP on arm64 since the pte
manipulation from the generic vmemmap_remap_pte() does not follow the
required ARM break-before-make sequence (clear the pte, flush the
TLBs, set the new pte). It may be re-enabled once this sequence is
sorted.
- Fix possible memory leak in the arm64 ACPI code if the SMCCC version
and conduit checks fail.
- Forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE since gcc ignores
-falign-functions=N with -Os.
- Don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN as no
randomisation would actually take place.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kaslr: don't pretend KASLR is enabled if offset < MIN_KIMG_ALIGN
arm64: ftrace: forbid CALL_OPS with CC_OPTIMIZE_FOR_SIZE
arm64: acpi: Fix possible memory leak of ffh_ctxt
arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP
arm64: pass ESR_ELx to die() of cfi_handler
arm64/fpsimd: Remove warning for SME without SVE
arm64: Reset KASAN tag in copy_highpage with HW tags only
Both Xavier (Tegra194) and Orin (Tegra234) support a 40-bit address map,
so bump the CBB ranges property to cover all of the 1 TiB address space.
This fixes an issue where some of the PCIe regions could not be remapped
because of they were outside the memory specified by the CBB's ranges
property.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Our virtual KASLR displacement is a randomly chosen multiple of
2 MiB plus an offset that is equal to the physical placement modulo 2
MiB. This arrangement ensures that we can always use 2 MiB block
mappings (or contiguous PTE mappings for 16k or 64k pages) to map the
kernel.
This means that a KASLR offset of less than 2 MiB is simply the product
of this physical displacement, and no randomization has actually taken
place. Currently, we use 'kaslr_offset() > 0' to decide whether or not
randomization has occurred, and so we misidentify this case.
If the kernel image placement is not randomized, modules are allocated
from a dedicated region below the kernel mapping, which is only used for
modules and not for other vmalloc() or vmap() calls.
When randomization is enabled, the kernel image is vmap()'ed randomly
inside the vmalloc region, and modules are allocated in the vicinity of
this mapping to ensure that relative references are always in range.
However, unlike the dedicated module region below the vmalloc region,
this region is not reserved exclusively for modules, and so ordinary
vmalloc() calls may end up overlapping with it. This should rarely
happen, given that vmalloc allocates bottom up, although it cannot be
ruled out entirely.
The misidentified case results in a placement of the kernel image within
2 MiB of its default address. However, the logic that randomizes the
module region is still invoked, and this could result in the module
region overlapping with the start of the vmalloc region, instead of
using the dedicated region below it. If this happens, a single large
vmalloc() or vmap() call will use up the entire region, and leave no
space for loading modules after that.
Since commit 82046702e288 ("efi/libstub/arm64: Replace 'preferred'
offset with alignment check"), this is much more likely to occur on
systems that boot via EFI but lack an implementation of the EFI RNG
protocol, as in that case, the EFI stub will decide to leave the image
where it found it, and the EFI firmware uses 64k alignment only.
Fix this, by correctly identifying the case where the virtual
displacement is a result of the physical displacement only.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230223204101.1500373-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Florian reports that when building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y,
he sees "Misaligned patch-site" warnings at boot, e.g.
| Misaligned patch-site bcm2836_arm_irqchip_handle_irq+0x0/0x88
| WARNING: CPU: 0 PID: 0 at arch/arm64/kernel/ftrace.c:120 ftrace_call_adjust+0x4c/0x70
This is because GCC will silently ignore `-falign-functions=N` when
passed `-Os`, resulting in functions not being aligned as we expect.
This is a known issue, and to account for this we modified the kernel to
avoid `-Os` generally. Unfortunately we forgot to account for
CONFIG_CC_OPTIMIZE_FOR_SIZE.
Forbid the use of CALL_OPS with CONFIG_CC_OPTIMIZE_FOR_SIZE=y to prevent
this issue. All exising ftrace features will work as before, though
without the performance benefit of CALL_OPS.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: http://lore.kernel.org/linux-arm-kernel/2d9284c3-3805-402b-5423-520ced56d047@gmail.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230227115819.365630-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A few bugfixes already came up during the merge window. Samsung, ASpeed,
Spear have minor DT changes, in case of Samsung this fixes a regression
compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci platform,
and we get a few last minute defconfig changes.
-----BEGIN PGP SIGNATURE-----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=ECLF
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few bugfixes already came up during the merge window. Samsung,
ASpeed, Spear have minor DT changes, in case of Samsung this fixes a
regression compared to earlier versions.
Bartosz takes over as the primary maintainer for the TI DaVinci
platform, and we get a few last minute defconfig changes"
* tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: spear320-hmi: correct STMPE GPIO compatible
ARM: dts: aspeed: p10bmc: Update battery node name
arm64: defconfig: Add IOSCHED_BFQ to the default configs
arm64: defconfig: Fix unintentional disablement of PCI on i.MX
ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
ARM: dts: exynos: correct TMU phandle in Odroid HC1
ARM: dts: exynos: correct TMU phandle in Odroid XU
ARM: dts: exynos: correct TMU phandle in Exynos5250
ARM: dts: exynos: correct TMU phandle in Exynos4210
ARM: dts: exynos: correct TMU phandle in Exynos4
MAINTAINERS: make me the maintainer of DaVinci platforms
ARM64 systems are often memory constrained and more often than not
use slow single-channel storage such as flash memory or MMC/SD-cards.
For any interactive systems (such as mobile phones, tablets,
chromebooks...) the BFQ I/O scheduler will be desireable.
Make sure the BFQ I/O scheduler is available on these systems.
ARM (32), Loongarch, MIPS, m68k, UM and S390 has also enabled BFQ in
their defconfigs, cf commit b495dfed706c4c5873c0dab8930ad6eb1d276a6c
"um: Cleanup CONFIG_IOSCHED_CFQ" where the motivation is that
it replaces the former CFQ scheduler.
Cc: linux-arm-kernel@lists.infradead.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230224135230.2295826-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A recent update to support PCI endpoint mode on i.MX platforms
unintentionally disabled PCI host support for i.MX in defconfig. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to defconfig
so the PCI_IMX6 ends up getting disabled. Switch defconfig to
PCI_IMX6_HOST to preserve the existing functionality.
Fixes: 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20230220-imx-pci-defconfig-v1-1-2210cf08340e@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
case with the CLK_OPS_PARENT_ENABLE flag combined with clk_core_is_enabled()
where it hangs the system. We'll simply assume the clk is disabled if the
parent is disabled and the flag is set. Trying to turn on the parent to check
the enable state of the clk runs into system hangs at boot. We let this bake in
-next for a couple weeks to make sure there aren't any more issues because the
last attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around sync_state and
disabling unused clks, but I asked for that to be reverted from the qcom PR
because it isn't ready and we're still discussing the best solution on the
list.
Outside of the core clk framework, we have the usual collection of clk driver
updates and support for new SoCs (which seems to never stop). The dirstat is
dominated by Qualcomm because they added support for quite a few SoCs this time
around and also migrated quite a few of their drivers to clk_parent_data. The
other big diff is in the Mediatek clk drivers that saw a significant rework
this cycle to similarly modernize the code, and we'll see that work continue in
the next cycle as well. Nothing really jumps out as scary here, except that the
significant churn in parent data descriptions can have typos that go unnoticed.
More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET ref
clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv, mpll,
sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for each
AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some of
them may use it
- Support synchronous power_off requests in the qcom GDSC driver for proper
GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and SDM845 are
moved to use the recently introduced properties in the GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock
is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404 to
Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to simplify
-----BEGIN PGP SIGNATURE-----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=Fle/
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We have one small patch to the clk core this time around. It fixes a
corner case with the CLK_OPS_PARENT_ENABLE flag combined with
clk_core_is_enabled() where it hangs the system. We'll simply assume
the clk is disabled if the parent is disabled and the flag is set.
Trying to turn on the parent to check the enable state of the clk runs
into system hangs at boot. We let this bake in -next for a couple
weeks to make sure there aren't any more issues because the last
attempt to fix this ran into hangs and had to be reverted.
Note: There were some more patches to the core framework around
sync_state and disabling unused clks, but I asked for that to be
reverted from the qcom PR because it isn't ready and we're still
discussing the best solution on the list.
Outside of the core clk framework, we have the usual collection of clk
driver updates and support for new SoCs (which seems to never stop).
The dirstat is dominated by Qualcomm because they added support for
quite a few SoCs this time around and also migrated quite a few of
their drivers to clk_parent_data. The other big diff is in the
Mediatek clk drivers that saw a significant rework this cycle to
similarly modernize the code, and we'll see that work continue in the
next cycle as well. Nothing really jumps out as scary here, except
that the significant churn in parent data descriptions can have typos
that go unnoticed. More details below.
Core:
- Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
New Drivers:
- Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
ref clocks
- Support for Mediatek MT7891 SoC clks
- Support for many Qualcomm clk controllers:
- QDU1000/QRU1000 global clock controller
- SA8775P global clock controller
- SM8550 TCSR and display clock controller
- SM6350 clock controller
- MSM8996 CBF and APCS clock controllers
Updates:
- Various cleanups and improvements to Mediatek clk drivers to reduce
code size and modernize the drivers
- Support for Versa 5P49V60 clks
- Disable R-Car H3 ES1.*, as it was only available to an internal
development group and needed a lot of quirks and workarounds
- Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
resets on Renesas RZ/V2M
- Add display clocks on Renesas R-Car V4H
- Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
- Free the imx_uart_clocks even if imx_register_uart_clocks returns
early
- Get the stdout clocks count from device tree on i.MX
- Drop the clock count argument from imx_register_uart_clocks()
- Keep the uart clocks on i.MX93 for when earlycon is used
- Fix SPDX comment in i.MX6SLL clocks bindings header
- Drop some unnecessary spaces from i.MX8ULP clocks bindings header
- Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
not configured via devicetree
- Fix the ENET1 gate configuration for i.MX6UL according to the
reference manual
- Add ENET refclock mux support for i.MX6UL
- Add support for USB host/device configuration on Renesas RZ/N1
- Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
V4H
- Add D1 CAN bus gates and resets for Allwinner
- Mark D1 CPUX clock as critical on Allwinner
- Reuse D1 driver for Allwinner R528/T113
- Cleanup sunxi-ng Kconfig
- Fix sunxi-ng kernel-doc issues
- Model Allwinner H3/H5 DRAM clock as fixed clock
- Use .determine_rate() instead of .round_rate() for the dualdiv,
mpll, sclk-div and cpu-dyn-div amlogic clock drivers
- DDR clocks were marked as critical in the proper clock driver for
each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
in the next releases as it only does clock enablement
- Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
of them may use it
- Support synchronous power_off requests in the qcom GDSC driver for
proper GPU power collapse
- Drop test clocks from various Qualcomm clk drivers
- Update parent references to use clk_parent_data/clk_hw in various
Qualcomm clk drivers
- Fixes for the Qualcomm MSM8996 CPU clock controller
- Transition Qualcomm MSM8974 GCC off the externally defined
sleep_clk
- Add GDSCs in the global clock controller for Qualcomm QCS404
- The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
- Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
SDM845 are moved to use the recently introduced properties in the
GDSC struct
- Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
the IPA clock is added on a variety of platforms
- De-duplicate identical clks in Qualcomm SMD RPM clk driver
- Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
to Qualcomm SDM RPM clk driver
- Various Qualcomm clk drivers use devm_pm_runtime_enable() to
simplify"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
clk: qcom: Revert sync_state based clk_disable_unused
clk: imx: pll14xx: fix recalc_rate for negative kdiv
clk: rs9: Drop unused pin_xin field
MAINTAINERS: clk: imx: Add Peng Fan as reviewer
clk: sprd: Add dependency for SPRD_UMS512_CLK
clk: ralink: fix 'mt7621_gate_is_enabled()' function
clk: mediatek: clk-mtk: Remove unneeded semicolon
dt-bindings: clock: remove stih416 bindings
dt-bindings: clock: add loongson-2 clock
dt-bindings: clock: add loongson-2 clock include file
clk: imx: fix compile testing imxrt1050
clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
clk: qcom: cpu-8996: add missing cputype include
...
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place.
- Add support for taking stage-2 access faults in parallel. This was an
accidental omission in the original parallel faults implementation,
but should provide a marginal improvement to machines w/o FEAT_HAFDBS
(such as hardware from the fruit company).
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception handling
and masking unsupported features for nested guests.
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM.
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at reducing
the trap overhead of running nested.
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems.
- Avoid VM-wide stop-the-world operations when a vCPU accesses its own
redistributor.
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
in the host.
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
This also drags in arm64's 'for-next/sme2' branch, because both it and
the PSCI relay changes touch the EL2 initialization code.
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Two patches sorting out confusion between virtual and physical
addresses, which currently are the same on s390.
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world,
some of them affecting architecurally legal but unlikely to
happen in practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at this
point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just
let the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how
to do initialization.
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
the correct hypercall instruction instead of relying on KVM to patch
in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
/WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
=goe1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Provide a virtual cache topology to the guest to avoid
inconsistencies with migration on heterogenous systems. Non secure
software has no practical need to traverse the caches by set/way in
the first place
- Add support for taking stage-2 access faults in parallel. This was
an accidental omission in the original parallel faults
implementation, but should provide a marginal improvement to
machines w/o FEAT_HAFDBS (such as hardware from the fruit company)
- A preamble to adding support for nested virtualization to KVM,
including vEL2 register state, rudimentary nested exception
handling and masking unsupported features for nested guests
- Fixes to the PSCI relay that avoid an unexpected host SVE trap when
resuming a CPU when running pKVM
- VGIC maintenance interrupt support for the AIC
- Improvements to the arch timer emulation, primarily aimed at
reducing the trap overhead of running nested
- Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
interest of CI systems
- Avoid VM-wide stop-the-world operations when a vCPU accesses its
own redistributor
- Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
exceptions in the host
- Aesthetic and comment/kerneldoc fixes
- Drop the vestiges of the old Columbia mailing list and add [Oliver]
as co-maintainer
RISC-V:
- Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
- Correctly place the guest in S-mode after redirecting a trap to the
guest
- Redirect illegal instruction traps to guest
- SBI PMU support for guest
s390:
- Sort out confusion between virtual and physical addresses, which
currently are the same on s390
- A new ioctl that performs cmpxchg on guest memory
- A few fixes
x86:
- Change tdp_mmu to a read-only parameter
- Separate TDP and shadow MMU page fault paths
- Enable Hyper-V invariant TSC control
- Fix a variety of APICv and AVIC bugs, some of them real-world, some
of them affecting architecurally legal but unlikely to happen in
practice
- Mark APIC timer as expired if its in one-shot mode and the count
underflows while the vCPU task was being migrated
- Advertise support for Intel's new fast REP string features
- Fix a double-shootdown issue in the emergency reboot code
- Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
SVM similar treatment to VMX
- Update Xen's TSC info CPUID sub-leaves as appropriate
- Add support for Hyper-V's extended hypercalls, where "support" at
this point is just forwarding the hypercalls to userspace
- Clean up the kvm->lock vs. kvm->srcu sequences when updating the
PMU and MSR filters
- One-off fixes and cleanups
- Fix and cleanup the range-based TLB flushing code, used when KVM is
running on Hyper-V
- Add support for filtering PMU events using a mask. If userspace
wants to restrict heavily what events the guest can use, it can now
do so without needing an absurd number of filter entries
- Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
support is disabled
- Add PEBS support for Intel Sapphire Rapids
- Fix a mostly benign overflow bug in SEV's
send|receive_update_data()
- Move several SVM-specific flags into vcpu_svm
x86 Intel:
- Handle NMI VM-Exits before leaving the noinstr region
- A few trivial cleanups in the VM-Enter flows
- Stop enabling VMFUNC for L1 purely to document that KVM doesn't
support EPTP switching (or any other VM function) for L1
- Fix a crash when using eVMCS's enlighted MSR bitmaps
Generic:
- Clean up the hardware enable and initialization flow, which was
scattered around multiple arch-specific hooks. Instead, just let
the arch code call into generic code. Both x86 and ARM should
benefit from not having to fight common KVM code's notion of how to
do initialization
- Account allocations in generic kvm_arch_alloc_vm()
- Fix a memory leak if coalesced MMIO unregistration fails
selftests:
- On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
emit the correct hypercall instruction instead of relying on KVM to
patch in VMMCALL
- Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
KVM: SVM: hyper-v: placate modpost section mismatch error
KVM: x86/mmu: Make tdp_mmu_allowed static
KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
KVM: arm64: nv: Filter out unsupported features from ID regs
KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
KVM: arm64: nv: Handle SMCs taken from virtual EL2
KVM: arm64: nv: Handle trapped ERET from virtual EL2
KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
KVM: arm64: nv: Support virtual EL2 exceptions
KVM: arm64: nv: Handle HCR_EL2.NV system register traps
KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
KVM: arm64: nv: Add EL2 system registers to vcpu context
KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
KVM: arm64: nv: Introduce nested virtualization VCPU feature
KVM: arm64: Use the S2 MMU context to iterate over S2 table
...
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/itAw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykJbQCfWv/J4ZElO108iHBU5mJCDagUDBgAnAtLLN6A
SEAnnokGCDtA/BNIXeES
=luRi
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.3-rc1.
Once again, Jiri and Ilpo have done a number of core vt and tty/serial
layer cleanups that were much needed and appreciated. Other than that,
it's just a bunch of little tty/serial driver updates:
- qcom-geni-serial driver updates
- liteuart driver updates
- hvcs driver cleanups
- n_gsm updates and additions for new features
- more 8250 device support added
- fpga/dfl update and additions
- imx serial driver updates
- fsl_lpuart updates
- other tiny fixes and updates for serial drivers
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (143 commits)
tty: n_gsm: add keep alive support
serial: imx: remove a redundant check
dt-bindings: serial: snps-dw-apb-uart: add dma & dma-names properties
soc: qcom: geni-se: Move qcom-geni-se.h to linux/soc/qcom/geni-se.h
tty: n_gsm: add TIOCMIWAIT support
tty: n_gsm: add RING/CD control support
tty: n_gsm: mark unusable ioctl structure fields accordingly
serial: imx: get rid of registers shadowing
serial: imx: refine local variables in rxint()
serial: imx: stop using USR2 in FIFO reading loop
serial: imx: remove redundant USR2 read from FIFO reading loop
serial: imx: do not break from FIFO reading loop prematurely
serial: imx: do not sysrq broken chars
serial: imx: work-around for hardware RX flood
serial: imx: factor-out common code to imx_uart_soft_reset()
serial: 8250_pci1xxxx: Add power management functions to quad-uart driver
serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver
serial: 8250_pci1xxxx: Add driver for quad-uart support
serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c
tty: pcn_uart: fix memory leak with using debugfs_lookup()
...
Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ivpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymkdQCeOS6N613eggYrXwnbjJhxMQDtKAcAmweK6kXh
3o1IKOYqIMOx5E7zxn6W
=7ajf
-----END PGP SIGNATURE-----
Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1.
Nothing major in here, just lots of good development, including:
- Thunderbolt additions for new device support and features
- xhci driver updates and cleanups
- USB gadget media driver updates (includes media core changes that
were acked by the v4l2 maintainers)
- lots of other USB gadget driver updates for new features
- dwc3 driver updates and fixes
- minor debugfs leak fixes
- typec driver updates and additions
- dt-bindings conversions to yaml
- other small bugfixes and driver updates
All have been in linux-next for a while with no reported issues"
* tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits)
usb: dwc3: xilinx: Remove unused of_gpio,h
usb: typec: pd: Add higher capability sysfs for sink PDO
usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO
usb: dwc3: pci: add support for the Intel Meteor Lake-M
usb: gadget: u_ether: Don't warn in gether_setup_name_default()
usb: gadget: u_ether: Convert prints to device prints
usb: gadget: u_serial: Add null pointer check in gserial_resume
usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails
xhci: host: potential NULL dereference in xhci_generic_plat_probe()
dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional
usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev
of: device: Do not ignore error code in of_device_uevent_modalias
of: device: Ignore modalias of reused nodes
usb: gadget: configfs: Fix set but not used variable warning
usb: gadget: uvc: Use custom strings if available
usb: gadget: uvc: Allow linking function to string descs
usb: gadget: uvc: Pick up custom string descriptor IDs
usb: gadget: uvc: Allow linking XUs to string descriptors
usb: gadget: configfs: Attach arbitrary strings to cdev
usb: gadget: configfs: Support arbitrary string descriptors
...
Allocated 'ffh_ctxt' memory leak is possible if the SMCCC version
and conduit checks fail and -EOPNOTSUPP is returned without freeing the
allocated memory.
Fix the same by moving the allocation after the SMCCC version and
conduit checks.
Fixes: 1d280ce099db ("arm64: Add architecture specific ACPI FFH Opregion callbacks")
Cc: <stable@vger.kernel.org> # 6.2.x
Cc: Will Deacon <will@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302191417.dAl9NuE8-lkp@intel.com/
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230223135742.2952091-1-sudeep.holla@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Revert the HUGETLB_PAGE_FREE_VMEMMAP selection from commit 1e63ac088f20
("arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64") but
keep the flush_dcache_page() compound_head() change as it aligns with
the corresponding check in the __sync_icache_dcache() function.
The original config option was renamed in commit 47010c040dec ("mm:
hugetlb_vmemmap: cleanup CONFIG_HUGETLB_PAGE_FREE_VMEMMAP*") to
HUGETLB_PAGE_OPTIMIZE_VMEMMAP and the flush_dcache_page() check was
further simplified by commit 2da1c30929a2 ("mm: hugetlb_vmemmap: delete
hugetlb_optimize_vmemmap_enabled()").
The reason for the revert is that the generic vmemmap_remap_pte()
function changes both the permissions (writeable to read-only) and the
output address (pfn) of the vmemmap ptes. This is deemed UNPREDICTABLE
by the Arm architecture without a break-before-make sequence (make the
PTE invalid, TLBI, write the new valid PTE). However, such sequence is
not possible since the vmemmap may be concurrently accessed by the
kernel. Disable the optimisation until a better solution is found.
Fixes: 1e63ac088f20 ("arm64: mm: hugetlb: enable HUGETLB_PAGE_FREE_VMEMMAP for arm64")
Cc: <stable@vger.kernel.org> # 5.19.x
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/Y9pZALdn3pKiJUeQ@arm.com
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20230222175232.540851-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()") which
does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter". These filters provide users
with finer-grained control over DAMOS's actions. SeongJae has also done
some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series "mm:
support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap
PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with his
series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings. The previous BPF-based approach had
shortcomings. See "mm: In-kernel support for memory-deny-write-execute
(MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a per-node
basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage during
compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in ths
series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's series
"mm, arch: add generic implementation of pfn_valid() for FLATMEM" and
"fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest of
the kernel in the series "Simplify the external interface for GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the series
"mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY/PoPQAKCRDdBJ7gKXxA
jlvpAPsFECUBBl20qSue2zCYWnHC7Yk4q9ytTkPB/MMDrFEN9wD/SNKEm2UoK6/K
DmxHkn0LAitGgJRS/W9w81yrgig9tAQ=
=MlGs
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
- Performance tweaks for efifb earlycon by Andy
- Preparatory refactoring and cleanup work in the efivar layer by Johan,
which is needed to accommodate the Snapdragon arm64 laptops that
expose their EFI variable store via a TEE secure world API.
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory attributes
table, so that firmware that is generated with ENDBR/BTI landing pads
will be mapped with enforcement enabled.
- Clean up how we check and print the EFI revision exposed by the
firmware.
- Incorporate EFI memory attributes protocol definition contributed by
Evgeniy and wire it up in the EFI zboot code. This ensures that these
images can execute under new and stricter rules regarding the default
memory permissions for EFI page allocations. (More work is in progress
here)
- CPER header cleanup by Dan Williams
- Use a raw spinlock to protect the EFI runtime services stack on arm64
to ensure the correct semantics under -rt. (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad by Darrell.
-----BEGIN PGP SIGNATURE-----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=+pOz
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"A healthy mix of EFI contributions this time:
- Performance tweaks for efifb earlycon (Andy)
- Preparatory refactoring and cleanup work in the efivar layer, which
is needed to accommodate the Snapdragon arm64 laptops that expose
their EFI variable store via a TEE secure world API (Johan)
- Enhancements to the EFI memory map handling so that Xen dom0 can
safely access EFI configuration tables (Demi Marie)
- Wire up the newly introduced IBT/BTI flag in the EFI memory
attributes table, so that firmware that is generated with ENDBR/BTI
landing pads will be mapped with enforcement enabled
- Clean up how we check and print the EFI revision exposed by the
firmware
- Incorporate EFI memory attributes protocol definition and wire it
up in the EFI zboot code (Evgeniy)
This ensures that these images can execute under new and stricter
rules regarding the default memory permissions for EFI page
allocations (More work is in progress here)
- CPER header cleanup (Dan Williams)
- Use a raw spinlock to protect the EFI runtime services stack on
arm64 to ensure the correct semantics under -rt (Pierre)
- EFI framebuffer quirk for Lenovo Ideapad (Darrell)"
* tag 'efi-next-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
firmware/efi sysfb_efi: Add quirk for Lenovo IdeaPad Duet 3
arm64: efi: Make efi_rt_lock a raw_spinlock
efi: Add mixed-mode thunk recipe for GetMemoryAttributes
efi: x86: Wire up IBT annotation in memory attributes table
efi: arm64: Wire up BTI annotation in memory attributes table
efi: Discover BTI support in runtime services regions
efi/cper, cxl: Remove cxl_err.h
efi: Use standard format for printing the EFI revision
efi: Drop minimum EFI version check at boot
efi: zboot: Use EFI protocol to remap code/data with the right attributes
efi/libstub: Add memory attribute protocol definitions
efi: efivars: prevent double registration
efi: verify that variable services are supported
efivarfs: always register filesystem
efi: efivars: add efivars printk prefix
efi: Warn if trying to reserve memory under Xen
efi: Actually enable the ESRT under Xen
efi: Apply allowlist to EFI configuration tables when running under Xen
efi: xen: Implement memory descriptor lookup based on hypercall
efi: memmap: Disregard bogus entries instead of returning them
...
Arnd Bergmann
Johan Hovold
Alexander Stein
Marek Vasut
Krzysztof Kozlowski
Andrew Halaney
Manivannan Sadhasivam
Brian Masney
Srinivas Kandagatla
Krishna chaitanya chundru
Yang Xiwen
Jianhua Lu
Konrad Dybcio
Abel Vesa
Michael Walle
Linus Torvalds
Thierry Reding
Ard Biesheuvel
Mark Rutland
Linus Walleij
Mark Brown
Sudeep Holla
Catalin Marinas