IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
For some reason this was never hooked up. Do it now so that over-current
interrupts can be logged.
Reported-by: Nicolas Chauvet <kwizart@gmail.com>
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to dmesg, thermal-zones for mem and cpu are missing hot
temperatures properties.
throttrip: pll: missing hot temperature
...
throttrip: mem: missing hot temperature
...
Adding them will clear the messages.
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Jetson TX1 the following message can be seen:
tegra_soctherm 700e2000.thermal-sensor: throttle-cfg: heavy: no throt prop or invalid prop
This patch will fix the invalid prop issue according to the binding.
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
According to dmesg, thermal-zones for mem and cpu are missing hot
temperatures properties.
throttrip: pll: missing hot temperature
...
throttrip: mem: missing hot temperature
...
Adding them will clear the messages.
Signed-off-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fix the device-tree entry that represents I/O High Voltage property
by replacing 'nvidia,io-high-voltage' with 'nvidia,io-hv' as the former
entry is deprecated.
Fixes: dbb72e2c305b ("arm64: tegra: Add configuration for PCIe C5 sideband signals")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
GIC400 has full support for virtualization, and yet the tegra186
DT doesn't expose the GICH/GICV regions (despite exposing the
maintenance interrupt that only makes sense for virtualization).
Add the missing regions, based on the hunch that the HW doesn't
use the CPU build-in interfaces, but instead the external ones
provided by the GIC. KVM's virtual GIC now works with this change.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the description of CPU PMUs for both the Denver and A57 clusters,
which enables the perf subsystem.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When the device-tree board file was added for the Tegra234 VDK simulator
it incorrectly used the names 'cbb' and 'sdhci' instead of 'bus' and
'mmc', respectively. The names 'bus' and 'mmc' are required by the
device-tree json-schema validation tools. Therefore, fix this by
renaming these nodes accordingly.
Fixes: 639448912ba1 ("arm64: tegra: Initial Tegra234 VDK support")
Reported-by: Ashish Singhal <ashishsingha@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AON HSP node's "reg" property size 0xa0000 will overlap with other
resources. This patch fixes that wrong value with correct size 0x90000.
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Fixes: a38570c22e9d ("arm64: tegra: Add nodes for TCU on Tegra194")
Signed-off-by: Thierry Reding <treding@nvidia.com>
USB host mode is broken on the OTG port of Jetson TX1 platform because
the USB_VBUS_EN0 regulator (regulator@11) is being overwritten by the
vdd-cam-1v2 regulator. This commit rearranges USB_VBUS_EN0 to be
regulator@14.
Fixes: 257c8047be44 ("arm64: tegra: jetson-tx1: Add camera supplies")
Cc: stable@vger.kernel.org
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Jetson Xavier NX board routes UARTA to the 40-pin header and UARTC
to a 12-pin debug header. The UARTs can be used by either the Tegra
Combined UART (TCU) driver or the Tegra 8250 driver. By default, the
TCU will use UARTC on Jetson Xavier NX. Currently, device-tree for
Xavier NX enables the TCU and the Tegra 8250 node for UARTC. Fix this
by disabling the Tegra 8250 node for UARTC and enabling the Tegra 8250
node for UARTA.
Fixes: 3f9efbbe57bc ("arm64: tegra: Add support for Jetson Xavier NX")
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Commit ff4c371d2bc0 ("arm64: defconfig: Build ADMA and ACONNECT driver")
enable the Tegra ADMA and ACONNECT drivers and this is causing resume
from system suspend to fail on Jetson TX2. Resume is failing because the
ACONNECT driver is being resumed before the BPMP driver, and the ACONNECT
driver is attempting to power on a power-domain that is provided by the
BPMP. While a proper fix for the resume sequencing problem is identified,
disable the ACONNECT for Jetson TX2 temporarily to avoid breaking system
suspend.
Please note that ACONNECT driver is used by the Audio Processing Engine
(APE) on Tegra, but because there is no mainline support for APE on
Jetson TX2 currently, disabling the ACONNECT does not disable any useful
feature at the moment.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is to remove similar errors as below:
OF: /.../gpio-port@0: could not find phandle
Commit 7569486d79ae ("gpio: dwapb: Add ngpios DT-property support")
explained the reason of above errors well and added the generic
"ngpios" property, let's use it.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The snps,dw-apb-uart binding need to specify two clocks: "baudclk",
"apb_pclk". But only "apb_pclk" is specified now. Because the driver
preferentially matches the first clock. Otherwise, it matches the second
clock instead of both clocks. So both of them use the same clock don't
change the function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The arm,pl011 binding need to specify two clocks: "uartclk", "apb_pclk".
But only "apb_pclk" is specified now. Because the driver preferentially
matches the first clock. Otherwise, it matches the second clock instead
of both clocks. So both of them use the same clock don't change the
function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The arm,pl022 binding need to specify two clocks: "sspclk", "apb_pclk".
But only "apb_pclk" is specified now. Because the driver preferentially
matches the first clock. Otherwise, it matches the second clock instead
of both clocks. So both of them use the same clock don't change the
function.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change the node name of the UART devices to match
"^serial(@[0-9a-f,]+)*$".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change the node name of the usb devices to match "^usb(@.*)?". These errors
are detected by generic-ehci.yaml and generic-ohci.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change the node name of the SMMU devices to match "^iommu@[0-9a-f]*".
Otherwise, the errors similar to the following will be reported by
arm,smmu-v3.yaml.
smmu_pcie: $nodename:0: 'smmu_pcie' does not match '^iommu@[0-9a-f]*'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Look at the clock-names schema defined in synopsys-dw-mshc.yaml:
clock-names:
items:
- const: biu
- const: ciu
The "biu" needs to be placed before the "ciu".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
uart1 and uart5 are not used as pinctrl, so the property "pinctrl-names"
can be deleted. In fact, the property "pinctrl-names" depends on the
property "pinctrl-0". So the errors similar to the following will be
reported by pinctrl-consumer.yaml.
serial@fdf00000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Use <> to separate the values of property-units will be treated as
multiple arrays. The errors similar to the following will be reported by
property-units.yaml.
ufs@ff3c0000: freq-table-hz: [[0, 0], [0, 0]] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Do not write the "reg" of multiple groups of data into a uint32 array,
use <> to separate them. Otherwise, the errors similar to the following
will be reported by reg.yaml.
soc: dsa@c7000000:reg:0: [0, 3305111552, 0, 8978432, 0, 3338665984, 0, \
6291456] is too long
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change the node name of the ITS devices to match
"^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$". Although
"interrupt-controller" is allowed, but "msi-controller" is preferred.
Otherwise, "interrupt-controller@b7000000: False schema does not allow"
will be reported by arm,gic-v3.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The DT binding for system controller is not allowed to contain only the
compatible string "syscon", the Hisilicon peripheral subsystem controller
should add compatible string "hisilicon,peri-subctrl". Otherwise, the
error "compatible: ['syscon'] is too short" will be reported.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change clock-names to "sspclk", "apb_pclk". Both of them use the same
clock.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Look at the clock-names schema defined in synopsys-dw-mshc.yaml:
clock-names:
items:
- const: biu
- const: ciu
The "biu" needs to be placed before the "ciu".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Make the memory node name match the regex "^memory(@[0-9a-f]+)?$" which
is described in memory.yaml. Otherwise, it will be treated as root node,
and misreported by root-node.yaml.
Errors misreported by root-node.yaml:
/: memory: False schema does not allow {'device_type': ['memory'], 'reg':
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Change bus node name from "amba" to "amba-bus" to match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change node name to match '^usb(@.*)?'
These errors are detected by generic-ehci.yaml and generic-ohci.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "uartclk", "apb_pclk". Both of them use the same
clock.
3. Change pinctrl-names to "default", "sleep".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "baudclk", "apb_pclk". Both of them use the same
clock.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: b7c2b61570798 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-4-cristian.birsan@microchip.com
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: 38153a017896f ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-3-cristian.birsan@microchip.com
The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-2-cristian.birsan@microchip.com
- Rename the DSI controllers to match the preferred
schema.
- Pull down the SDI2 feedback clock on the Skomer.
- Add proper supplies to the MaxToch touchscreen on
the Golden.
-----BEGIN PGP SIGNATURE-----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=TF1x
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt
Ux500 DTS updates for the v5.11 kernels:
- Rename the DSI controllers to match the preferred
schema.
- Pull down the SDI2 feedback clock on the Skomer.
- Add proper supplies to the MaxToch touchscreen on
the Golden.
* tag 'ux500-dts-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500-golden: Add proper supplies to touchscreen
ARM: dts: ux500: skomer: Pull down SDI2 FBCLK
ARM: dts: ux500: Rename DSI controller nodes
Link: https://lore.kernel.org/r/CACRpkdY_M4xj++QhRPqX6N3x9YmFNJkz70DnvBj7Ai-dOtCJSQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add Nuvoton NPCM730 SoC device tree.
The Nuvoton NPCN730 SoC is a part of the
Nuvoton NPCM7xx SoCs family.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Benjamin Fair <benjaminfair@google.com>
Link: https://lore.kernel.org/r/20201119080002.100342-1-tmaimon77@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Many cleanups of DTS and alignments to dtschema. Most of them do not
have any functional effect except passing dtschema checks or dtc W=2
builds.
2. Fix USB 3.0 ports on Odroid XU board: wrong roles assigned to two
ports, missing supply to the USB over-current and VBUS control pins
and finally missing pin configuration for these pins.
3. Switch Exynos5422 DMC driver to monitoring/polling mode, instead of
using interrupts.
4. Correct the usage of "opp-shared" properties which lead to disabling
the bus frequency and voltage scaling.
5. Enable Bluetooth on few Exynos4210 and Exynos4412 boards.
6. Enable dual-role USB on Odroid U3+ board.
7. Add Ethernet description in multiple Odroid DTS allowing also easy
MAC address filling by bootloader.
8. Add Ethernet to Artik 5 (Exynos3250) board.
9. Add interconnect properties to Exynos4412 to fix old Mixer issues.
-----BEGIN PGP SIGNATURE-----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=TybJ
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.11
1. Many cleanups of DTS and alignments to dtschema. Most of them do not
have any functional effect except passing dtschema checks or dtc W=2
builds.
2. Fix USB 3.0 ports on Odroid XU board: wrong roles assigned to two
ports, missing supply to the USB over-current and VBUS control pins
and finally missing pin configuration for these pins.
3. Switch Exynos5422 DMC driver to monitoring/polling mode, instead of
using interrupts.
4. Correct the usage of "opp-shared" properties which lead to disabling
the bus frequency and voltage scaling.
5. Enable Bluetooth on few Exynos4210 and Exynos4412 boards.
6. Enable dual-role USB on Odroid U3+ board.
7. Add Ethernet description in multiple Odroid DTS allowing also easy
MAC address filling by bootloader.
8. Add Ethernet to Artik 5 (Exynos3250) board.
9. Add interconnect properties to Exynos4412 to fix old Mixer issues.
* tag 'samsung-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (36 commits)
ARM: dts: exynos: use hyphens in MFC reserved memory node names
ARM: dts: exynos: use hyphens in Exynos5 node names
ARM: dts: exynos: use generic name for max77693 motor in Midas
ARM: dts: exynos: use hyphens in Exynos4 node names
ARM: dts: exynos: use hyphens in Exynos3250 node names
ARM: dts: exynos: Add interconnects to Exynos4412 mixer
ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodes
ARM: dts: exynos: Add Ethernet to Artik 5 board
ARM: dts: exynos: Add a placeholder for a MAC address
ARM: dts: exynos: Add Ethernet interface description for Odroid X/X2
ARM: dts: exynos: Add Ethernet interface description for Odroid U3
ARM: dts: exynos: Add Ethernet interface description for Odroid XU
ARM: dts: exynos: Add Ethernet interface description for Odroid XU3 Lite
ARM: dts: exynos: Enable DWC2 dual-role support on OdroidU3+ boards
ARM: dts: s5pv210: adjust node names to DT spec
ARM: dts: exynos: adjust node names to DT spec in Exynos542x boards
ARM: dts: exynos: adjust node names to DT spec in Odroid XU
ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards
ARM: dts: exynos: remove redundant status=okay in Exynos4412 boards
ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards
...
Link: https://lore.kernel.org/r/20201113162211.10020-2-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Touch screen and OV5640 camera support for the iWave RainboW Qseven
board (G21D), and its camera expansion board,
- Support for the AISTARVISION MIPI Adapter V2.1 board connected to
HiHope RZ/G2 boards,
- SPI (MSIOF) support for the R-Car M3-W+ SoC,
- Digital Radio Interface (DRIF) support for the R-Car M3-N SoC,
- Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo,
- Minor fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCX66VTQAKCRCKwlD9ZEnx
cFhnAP9W9Jp5o/gp9JQ+Y2Js3xMDD9JngTYRQ+9x4qu2HTf0AAEAjfSzb0T2ub/x
HaW5LisNk1LZNp09+9ugw/nNZxp45AQ=
=QdJ8
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.11
- Touch screen and OV5640 camera support for the iWave RainboW Qseven
board (G21D), and its camera expansion board,
- Support for the AISTARVISION MIPI Adapter V2.1 board connected to
HiHope RZ/G2 boards,
- SPI (MSIOF) support for the R-Car M3-W+ SoC,
- Digital Radio Interface (DRIF) support for the R-Car M3-N SoC,
- Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo,
- Minor fixes and improvements.
* tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404
arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree
arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes
arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out of hd3ss3220 device
arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 device
arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: r8a77965: Add DRIF support
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor
arm64: dts: renesas: cat875: Remove rxc-skew-ps from ethernet-phy node
arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instances
arm64: dts: renesas: r8a77961: Add MSIOF nodes
arm64: dts: renesas: Align GPIO hog names with dtschema
ARM: dts: r8a7742-iwg21d-q7: Add LCD support
Link: https://lore.kernel.org/r/20201113150854.3923885-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This sets up the Atmel maXTouch touchscreen to use proper
VDDA and VDD supplies as now supported by bindings and
driver.
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Nick Reitemeyer <nick.reitemeyer@web.de>
Cc: Nick Dyer <nick@shmanahar.org>
Link: https://lore.kernel.org/r/20201120124212.1086063-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert the b53 DSA device tree bindings to YAML in order to allow
for automatic checking and such.
Reviewed-by: Rob Herring <robh@kernel.org>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Provide an empty 'ports' container node with the correct #address-cells
and #size-cells properties. This silences the following warning:
arch/arm/boot/dts/bcm958522er.dt.yaml:
ethernet-switch@36000: 'oneOf' conditional failed, one must be fixed:
'ports' is a required property
'ethernet-ports' is a required property
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Provide a valid compatible string for the Ethernet switch node based on
the board including the switch. This allows us to have sane defaults and
silences the following warnings:
arch/arm/boot/dts/bcm958522er.dt.yaml:
ethernet-switch@36000: compatible: 'oneOf' conditional failed,
one
must be fixed:
['brcm,bcm5301x-srab'] is too short
'brcm,bcm5325' was expected
'brcm,bcm53115' was expected
'brcm,bcm53125' was expected
'brcm,bcm53128' was expected
'brcm,bcm5365' was expected
'brcm,bcm5395' was expected
'brcm,bcm5389' was expected
'brcm,bcm5397' was expected
'brcm,bcm5398' was expected
'brcm,bcm11360-srab' was expected
'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab',
'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab',
'brcm,bcm53019-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab',
'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab',
'brcm,bcm58311-srab', 'brcm,bcm58313-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab',
'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab',
'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch',
'brcm,bcm6328-switch', 'brcm,bcm6368-switch']
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The register name should be "sgmii_config", not "sgmii", this is not a
functional change since no code is currently looking for that register
by name (or at all).
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the switch unit name from srab to ethernet-switch, allowing us
to fix warnings such as:
CHECK arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml:
srab@18007000: $nodename:0: 'srab@18007000' does not match
'^(ethernet-)?switch(@.*)?$'
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Provide an empty 'ports' container node with the correct #address-cells
and #size-cells properties. This silences the following warning:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml:
ethernet-switch@18007000: 'oneOf' conditional failed, one must be fixed:
'ports' is a required property
'ethernet-ports' is a required property
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
