IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This allows low level drivers to refresh the tx agg session timer, based on
querying stats from the firmware usually. Especially for some mt76 devices
support .net_fill_forward_path would bypass mac80211, which leads to tx BA
session timeout clients that set a timeout in their AddBA response to our
request, even if our request is without a timeout.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/7c3f72eac1c34921cd84a462e60d71e125862152.1676616450.git.ryder.lee@mediatek.com
[slightly clarify commit message, add note about RCU]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The new TLV format enables adding TLVs after the fixed
fields in radiotap, as part of the radiotap header.
Support this and move vendor data to the TLV format,
allowing a reuse of the RX_FLAG_RADIOTAP_VENDOR_DATA as
the new RX_FLAG_RADIOTAP_TLV_AT_END flag.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.b18fd5da8477.I576400ec40a7b35ef97a3b09a99b3a49e9174786@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The return type here should be u64 for the flags, even
if it doesn't matter right now because it doesn't return
any flags that don't fit into u32.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.d67ccae57d60.Ia4768e547ba8b1deb2b84ce3bbfbe216d5bfff6a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Given the code in cfg80211, EHT capa cannot be non-NULL when
HE capa is NULL, but it's easier to reason about it if both
are checked and the compiler will likely integrate the check
with the previous one for HE capa anyway.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.7413d50d23bc.I6fef7484721be9bd5364f64921fc5e9168495f62@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This adds the infrastructure to have netdev specific per-link data both
for mac80211 and the driver in debugfs. For the driver, a new callback
is added which is only used if MLO is supported.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.fb4c947e4df8.I69b3516ddf4c8a7501b395f652d6063444ecad63@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While often not needed, this considerably simplifies going from a link
specific bss_config to the vif. This helps with e.g. creating link
specific debugfs entries inside drivers.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.46f701a10ed5.I20390b2a8165ff222d66585915689206ea93222b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We should perhaps support this API for MLO, but it's not
clear that it makes sense, in any case then we'd have to
update it to probe the correct BSS.
For now, if it happens, warn only once so that we don't
get flooded with messages if the driver misbehaves and
calls this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.1c8499b6fbe6.I1a76a2be3b42ff93904870ac069f0319507adc23@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of beacon protection, check if the key was offloaded
to the hardware and in that case set control.hw_key so that
the encryption function will see it and only do the needed
steps that aren't done in hardware.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.b2becd9a22fb.I6c0b9c50c6a481128ba912a11cb7afc92c4b6da7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we remove radiotap from skb data, clear all RX_FLAG_X related
info that indicate info on the skb data.
Also we need to do it only once so remove the clear from cooked_monitor.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.74d3efe19eae.Ie17a35864d2e120f9858516a2e3d3047d83cf805@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of the comment about holding RTNL, which is now wrong,
add a proper lockdep assertion for the wiphy mutex.
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.84352e46f342.Id90fef8c581cebe19cb30274340cf43885d55c74@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This documentation wasn't added in the original patch,
add it now.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 6e4c0d0460bd ("wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDU")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we have multiple interfaces receiving the same frame,
such as a multicast frame, one interface might have a sta
and the other not. In this case, link_sta would be set but
not cleared again.
Always set link_sta, so we keep an invariant that link_sta
and sta are either both set or both not set.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's at least one case in ieee80211_rx_for_interface()
where we might pass &((struct sta_info *)NULL)->sta to it
only to then do container_of(), and then checking the
result for NULL, but checking the result of container_of()
for NULL looks really odd.
Fix this by just passing the struct sta_info * instead.
Fixes: e66b7920aa5a ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The convention for find_first_bit() is 0-based, while ffs()
is 1-based, so this is now off-by-one. I cannot reproduce the
gcc-9 problem, but since the -1 is now removed, I'm hoping it
will still avoid the original issue.
Reported-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Fixes: 1d8d4af43474 ("wifi: mac80211: avoid u32_encode_bits() warning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The ieee80211_accept_frame() function performs a number of early checks
to decide whether or not further processing needs to be done on a frame.
One of those checks is the ieee80211_is_robust_mgmt_frame() function.
It requires to peek into the frame payload, but because defragmentation
does not occur until later on in the receive path, this peek is invalid
for any fragment other than the first one. Also, in this scenario there
is no STA and so the fragmented frame will be dropped later on in the
process and will not reach the upper stack. This can happen with large
action frames at low rates, for example, we see issues with DPP on S1G.
This change will only check if the frame is robust if it's the first
fragment. Invalid fragmented packets will be discarded later after
defragmentation is completed.
Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com>
Link: https://lore.kernel.org/r/20221124005336.1618411-1-gilad.itzkovitch@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
gcc-9 triggers a false-postive warning in ieee80211_mlo_multicast_tx()
for u32_encode_bits(ffs(links) - 1, ...), since ffs() can return zero
on an empty bitmask, and the negative argument to u32_encode_bits()
is then out of range:
In file included from include/linux/ieee80211.h:21,
from include/net/cfg80211.h:23,
from net/mac80211/tx.c:23:
In function 'u32_encode_bits',
inlined from 'ieee80211_mlo_multicast_tx' at net/mac80211/tx.c:4437:17,
inlined from 'ieee80211_subif_start_xmit' at net/mac80211/tx.c:4485:3:
include/linux/bitfield.h:177:3: error: call to '__field_overflow' declared with attribute error: value doesn't fit into mask
177 | __field_overflow(); \
| ^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:197:2: note: in expansion of macro '____MAKE_OP'
197 | ____MAKE_OP(u##size,u##size,,)
| ^~~~~~~~~~~
include/linux/bitfield.h:200:1: note: in expansion of macro '__MAKE_OP'
200 | __MAKE_OP(32)
| ^~~~~~~~~
Newer compiler versions do not cause problems with the zero argument
because they do not consider this a __builtin_constant_p().
It's also harmless since the hweight16() check already guarantees
that this cannot be 0.
Replace the ffs() with an equivalent find_first_bit() check that
matches the later for_each_set_bit() style and avoids the warning.
Fixes: 963d0e8d08d9 ("wifi: mac80211: optionally implement MLO multicast TX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230214132025.1532147-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MLD address translation should be done only for individually addressed
frames. Otherwise, AAD calculation would be wrong and the decryption
would fail.
Fixes: e66b7920aa5ac ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Link: https://lore.kernel.org/r/20230214101048.792414-1-andrei.otcheretianski@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Non-MLO station frames are dropped in Rx path due to the condition
check in ieee80211_rx_is_valid_sta_link_id(). In multi-link AP scenario,
non-MLO stations try to connect in any of the valid links in the ML AP,
where the station valid_links and link_id params are valid in the
ieee80211_sta object. But ieee80211_rx_is_valid_sta_link_id() always
return false for the non-MLO stations by the assumption taken is
valid_links and link_id are not valid in non-MLO stations object
(ieee80211_sta), this assumption is wrong. Due to this assumption,
non-MLO station frames are dropped which leads to failure in association.
Fix it by removing the condition check and allow the link validation
check for the non-MLO stations.
Fixes: e66b7920aa5a ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://lore.kernel.org/r/20230206160330.1613-1-quic_periyasa@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stations can update bandwidth/NSS change in
VHT action frame with action type Operating Mode Notification.
(IEEE Std 802.11-2020 - 9.4.1.53 Operating Mode field)
For Operating Mode Notification, an RX NSS change to a value
greater than AP's maximum NSS should not be allowed.
During fuzz testing, by forcefully sending VHT Op. mode notif.
frames from STA with random rx_nss values, it is found that AP
accepts rx_nss values greater that APs maximum NSS instead of
discarding such NSS change.
Hence allow NSS change only up to maximum NSS that is negotiated
and capped to AP's capability during association.
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Link: https://lore.kernel.org/r/20230207114146.10567-1-quic_ramess@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At least ath10k and ath11k supported hardware (maybe more) does not implement
mesh A-MSDU aggregation in a standard compliant way.
802.11-2020 9.3.2.2.2 declares that the Mesh Control field is part of the
A-MSDU header (and little-endian).
As such, its length must not be included in the subframe length field.
Hardware affected by this bug treats the mesh control field as part of the
MSDU data and sets the length accordingly.
In order to avoid packet loss, keep track of which stations are affected
by this and take it into account when converting A-MSDU to 802.3 + mesh control
packets.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230213100855.34315-5-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The current mac80211 mesh A-MSDU receive path fails to parse A-MSDU packets
on mesh interfaces, because it assumes that the Mesh Control field is always
directly after the 802.11 header.
802.11-2020 9.3.2.2.2 Figure 9-70 shows that the Mesh Control field is
actually part of the A-MSDU subframe header.
This makes more sense, since it allows packets for multiple different
destinations to be included in the same A-MSDU, as long as RA and TID are
still the same.
Another issue is the fact that the A-MSDU subframe length field was apparently
accidentally defined as little-endian in the standard.
In order to fix this, the mesh forwarding path needs happen at a different
point in the receive path.
ieee80211_data_to_8023_exthdr is changed to ignore the mesh control field
and leave it in after the ethernet header. This also affects the source/dest
MAC address fields, which now in the case of mesh point to the mesh SA/DA.
ieee80211_amsdu_to_8023s is changed to deal with the endian difference and
to add the Mesh Control length to the subframe length, since it's not covered
by the MSDU length field.
With these changes, the mac80211 will get the same packet structure for
converted regular data packets and unpacked A-MSDU subframes.
The mesh forwarding checks are now only performed after the A-MSDU decap.
For locally received packets, the Mesh Control header is stripped away.
For forwarded packets, a new 802.11 header gets added.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230213100855.34315-4-nbd@nbd.name
[fix fortify build error]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that all drivers use iTXQ, it does not make sense to check to drop
tx forwarding packets when the driver has stopped the queues.
fq_codel will take care of dropping packets when the queues fill up
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230213100855.34315-3-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The value of last_rate in ieee80211_sta_rx_stats is degraded from u32 to
u16 after being assigned to rate variable, which causes information loss
in STA_STATS_FIELD_TYPE and later bitfields.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://lore.kernel.org/r/20230209110659.25447-1-shayne.chen@mediatek.com
Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Configure the bitmap in link_conf and notify the driver.
- Modify 'change' in ieee80211_start_ap() from u32 to u64 to support
BSS_CHANGED_EHT_PUNCTURING.
- Propagate the bitmap in channel switch events to userspace.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Link: https://lore.kernel.org/r/20230131001227.25014-5-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- Move ieee80211_valid_disable_subchannel_bitmap() from mlme.c to
chan.c, rename it as cfg80211_valid_disable_subchannel_bitmap()
and export it.
- Modify the prototype to include struct cfg80211_chan_def instead
of only bandwidth to support a check which returns false if the
primary channel is punctured.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230131001227.25014-2-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Handle the Puncturing info received from the AP in the
EHT Operation element in beacons.
If the info is invalid:
- during association: disable EHT connection for the AP
- after association: disconnect
This commit includes many (internal) bugfixes and spec
updates various people.
Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/r/20230127123930.4fbc74582331.I3547481d49f958389f59dfeba3fcc75e72b0aa6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move color collision report in a dedicated delayed work and do not run
it in interrupt context in order to rate-limit the number of events
reported to userspace. Moreover grab wdev mutex in
ieee80211_color_collision_detection_work routine since it is required
by cfg80211_obss_color_collision_notify().
Tested-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Fixes: 5f9404abdf2a ("mac80211: add support for BSS color change")
Link: https://lore.kernel.org/r/3f6cf60c892ad40c1cca4a55d62b1224ef1c6ce9.1674644379.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Somehow an extra 'e' slipped in there without anyone noticing,
drop that from ieeee80211_obss_color_collision_notify().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add minimal support for RX EHT rate reporting, not yet
adding (modifying) any radiotap headers, just statistics
for cfg80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adding flags for SU Beamformer, SU Beamformee, MU Beamformer and Full
Bandwidth UL MU-MIMO for HE. This is utilized to pass MU-MIMO
configurations from user space to driver in AP mode.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Link: https://lore.kernel.org/r/1665006886-23874-2-git-send-email-quic_msinada@quicinc.com
[fixed indentation, removed redundant !!]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adding flags for SU Beamformer, SU Beamformee, MU Beamformer and
MU Beamformee for VHT. This is utilized to pass MU-MIMO
configurations from user space to driver in AP mode.
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Link: https://lore.kernel.org/r/1665006886-23874-1-git-send-email-quic_msinada@quicinc.com
[fixed indentation, removed redundant !!]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.
96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
This reverts commit acb99b9b2a08f ("mac80211: Add stations iterator
where the iterator function may sleep"). A different approach was found
for the rtw88 driver where most of the problematic locks were converted
to a driver-local mutex. Drop ieee80211_iterate_stations() because there
are no users of that function.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221226191609.2934234-1-martin.blumenstingl@googlemail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of preventing adding AP_VLAN to MLO enabled APs, this check was
preventing adding more than one 4-addr AP_VLAN regardless of the MLO status.
Fix this by adding missing extra checks.
Fixes: ae960ee90bb1 ("wifi: mac80211: prevent VLANs on MLDs")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221214130326.37756-1-nbd@nbd.name
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When multiple interfaces are present in the local interface
list, new skb copy is taken before rx processing except for
the first interface. The address translation happens each
time only on the original skb since the hdr pointer is not
updated properly to the newly created skb.
As a result frames start to drop in userspace when address
based checks or search fails.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Link: https://lore.kernel.org/r/20221208040050.25922-1-quic_srirrama@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reset multiple BSSID options when all AP related configurations are
reset in ieee80211_stop_ap().
Stale values result in HWSIM test failures (e.g. p2p_group_cli_invalid),
if run after 'he_ap_ema'.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20221221185616.11514-1-quic_alokad@quicinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a running wake_tx_queue() call is aborted due to a hw queue stop
the corresponding iTXQ is not always correctly marked for resumption:
wake_tx_push_queue() can stops the queue run without setting
@IEEE80211_TXQ_STOP_NETIF_TX.
Without the @IEEE80211_TXQ_STOP_NETIF_TX flag __ieee80211_wake_txqs()
will not schedule a new queue run and remaining frames in the queue get
stuck till another frame is queued to it.
Fix the issue for all drivers - also the ones with custom wake_tx_queue
callbacks - by moving the logic into ieee80211_tx_dequeue() and drop the
redundant @txqs_stopped.
@IEEE80211_TXQ_STOP_NETIF_TX is also renamed to @IEEE80211_TXQ_DIRTY to
better describe the flag.
Fixes: c850e31f79f0 ("wifi: mac80211: add internal handler for wake_tx_queue")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20221230121850.218810-1-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
