IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pull soundwire updates from Vinod Koul:
- Constify sdw_bus and sdw_master_type objects
- use of rtd helper for better code
- intel aux device remove redundant assignment
* tag 'soundwire-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: Use snd_soc_substream_to_rtd() to obtain rtd
soundwire: constify the struct device_type usage
soundwire: bus_type: make sdw_bus_type const
soundwire: intel_auxdevice: remove redundant assignment to variable link_flags
soundwire: stream: add missing const to Documentation
Refactor amd SoundWire manager device node creation logic and implement
generic functions to have a common functionality for SoundWire manager
platform device creation, start and exit sequence for both legacy(NO DSP)
and SOF stack for AMD platforms. These functions will be invoked from
legacy and SOF stack.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://msgid.link/r/20240129055147.1493853-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull soundwire updates from Vinod Koul:
- Core: add concept of controller_id to deal with clear Controller /
Manager hierarchy
- bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
qcom_swrm_stream_alloc_ports() and setting controller id to hw master
id
* tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: drop bus freq calculation and set 'max_clk_freq'
soundwire: generic_bandwidth_allocation use bus->params.max_dr_freq
soundwire: qcom: set controller id to hw master id
soundwire: fix initializing sysfs for same devices on different buses
soundwire: bus: introduce controller_id
soundwire: stream: constify sdw_port_config when adding devices
soundwire: qcom: move sconfig in qcom_swrm_stream_alloc_ports() out of critical section
soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
Currently the Qualcomm Soundwire controller in its DAI startup op
allocates the Soundwire stream runtime. This works fine for existing
designs, but has limitations for stream runtimes with multiple
controllers, like upcoming Qualcomm X1E80100 SoC with four WSA8840
speakers on two Soundwire controllers.
When two Soundwire controllers are added to sound card codecs, Soundwire
startup() is called twice, one for each Soundwire controller, and second
execution overwrites what was set before. During shutdown() this causes
double free.
It is expected to have only one Soundwire stream runtime, thus it should
be allocated from SoC soundcard context startup(), not from each
Soundwire startup(). Such way will properly handle both cases: one and
two Soundwire controllers in the stream runtime.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231128165638.757665-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Start from ACE1.x, DOAISE is added to AC timing control
register bit 5, it combines with DOAIS to get effective
timing, and has the default value 1.
The current code fills DOAIS, DACTQE and DODS bits to a
variable initialized to zero, and updates the variable
to AC timing control register. With this operation, We
change DOAISE to 0, and force a much more aggressive
timing. The timing is even unable to form a working
waveform on SDA pin.
This patch uses read-modify-write operation for the AC
timing control register access, thus makes sure those
bits not supposed and intended to change are not touched.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231127124735.2080562-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If bus is marked as multi_link, but number of masters in the stream is
not higher than bus->hw_sync_min_links (bus->multi_link && m_rt_count >=
bus->hw_sync_min_links), bank switching should not happen. The first
part of do_bank_switch() code properly takes these conditions into
account, but second part (sdw_ml_sync_bank_switch()) relies purely on
bus->multi_link property. This is not balanced and leads to NULL
pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Call trace:
wait_for_completion_timeout+0x124/0x1f0
do_bank_switch+0x370/0x6f8
sdw_prepare_stream+0x2d0/0x438
qcom_snd_sdw_prepare+0xa0/0x118
sm8450_snd_prepare+0x128/0x148
snd_soc_link_prepare+0x5c/0xe8
__soc_pcm_prepare+0x28/0x1ec
dpcm_be_dai_prepare+0x1e0/0x2c0
dpcm_fe_dai_prepare+0x108/0x28c
snd_pcm_do_prepare+0x44/0x68
snd_pcm_action_single+0x54/0xc0
snd_pcm_action_nonatomic+0xe4/0xec
snd_pcm_prepare+0xc4/0x114
snd_pcm_common_ioctl+0x1154/0x1cc0
snd_pcm_ioctl+0x54/0x74
Fixes: ce6e74d008 ("soundwire: Add support for multi link bank switch")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124180136.390621-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull soundwire updates from Vinod Koul:
- Core now has improved handling of errors for clock stop
- Support for qcom v2.0.0 status registers and command ignored
interrupt and more logging for failures
- DMI quirk for HP Omen machine
* tag 'soundwire-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: dmi-quirks: update HP Omen match
soundwire: bus: improve error handling for clock stop prepare/deprepare
soundwire: qcom: Log clk_get("iface") failures
soundwire: qcom: handle command ignored interrupt
soundwire: qcom: use newer link status tregister on v2.0.0
The same logic is used for clock stop prepare and deprepare, and
having different logs for the two steps helps identify problems.
In addition, when the "NotFinished" bit remains set, the error
handling is not quite right:
a) for the clock stop prepare, the error is handled at the caller
level, and the error is ignored: there's no good reason to prevent the
pm_runtime suspend from happening. Throwing an error that is later
ignored is confusing.
b) for the clock stop deprepare, the error is ignored in bus.c and a
dev_warn() log shown. Throwing an error is also alarming users for no
good reason.
For both cases, demoting the error to dev_dbg() makes more sense.
Link: https://github.com/thesofproject/linux/issues/4619
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20231013010812.114216-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Soundwire v2.0.0 comes with a new register LINK_STATUS for the
FRAME_GEN_ENABLED field (bit indicating that an active frame is
running). The old register COMP_STATUS is still there and still works,
although the new one is preferred in downstream sources. Probably
because it allows to choose Soundwire instance per CPU. Most of the
code allowing to use new register for Soundwire v2.0.0 was already there
as part of commit 312355a6a9 ("soundwire: qcom: add support for v2.0.0
controller"), so switch to it in swrm_wait_for_frame_gen_enabled()
function. This should not have functional impact, because the old
register still behaves correctly.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230728112848.67092-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull soundwire updates from Vinod Koul:
"Device numbering and intel driver changes are main features:
- Core support for soundwire device number allocation
- intel driver updates for adding hw_params for DAI ops, hybrid
number allocation and power managemnt callback updates
- DT header include changes for subsystem"
* tag 'soundwire-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add DAI hw_params/prepare/hw_free callbacks
soundwire: intel_auxdevice: add hybrid IDA-based device_number allocation
soundwire: bus: add callbacks for device_number allocation
soundwire: extend parameters of new_peripheral_assigned() callback
soundWire: intel_auxdevice: resume 'sdw-master' on startup and system resume
soundwire: intel_auxdevice: enable pm_runtime earlier on startup
soundwire: Explicitly include correct DT includes
Currently the in-band alerts for SoundWire peripherals can only
be communicated to the driver through the interrupt_callback
function. This however is slightly inconvenient for devices that wish
to share IRQ handling code between SoundWire and I2C/SPI, the later
would normally register an IRQ handler with the IRQ subsystem. However
there is no reason the SoundWire in-band IRQs can not also be
communicated as an actual IRQ to the driver.
Add support for SoundWire peripherals to register a normal IRQ
handler to receive SoundWire in-band alerts, allowing code to be
shared across control buses. Note that we allow users to use both the
interrupt_callback and the IRQ handler, this is useful for devices
which must clear additional chip specific SoundWire registers that are
not a part of the normal IRQ flow, or the SoundWire specification.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-2-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The IDA-based allocation is useful to simplify debug, but it was also
introduced as a prerequisite to deal with the Intel Lunar Lake
hardware programming sequences: the wake-ups have to be handled with a
system-unique SDI address at the HDaudio controller level.
At the time, the restriction introduced by the IDA to 8 devices total
seemed perfectly fine, but recently hardware vendors created
configurations with more than 8 devices.
Add a new allocation strategy to allow for more than 8 devices using
information on the type of devices, and only use the IDA-based
allocation for devices capable of generating a wake.
In theory the information on wake capabilities should come from
firmware, but none of the existing ACPI tables provide it. The drivers
set the 'wake_capable' property, but this cannot be used reliably: if
the driver probe happens *after* the enumeration, then that property
is not initialized yet. Trying to modify the device_number on-the-fly
proved to be an impossible task generating race conditions left and
right.
The only reliable work-around to control the enumeration is to add a
quirk table. It's ugly but until platform firmware improves, hopefully as a
result of MIPI/SDCA stardization, we can expect that quirk table to
grow for each new headset or microphone codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SoundWire bus is handled with a dedicated device, which is placed
between the Intel auxiliary device and peripheral devices, e.g.
soundwire_intel.link.0/sdw-master-0/sdw:0:025d:0711:01
The functionality of this 'sdw-master' device is limited, specifically
for pm_runtime the ASoC framework will not rely on
pm_runtime_get_sync() since it does not register any components. It
will only change status thanks to the parent-child relationship which
guarantees that the 'sdw-master' device will be pm_runtime resumed
before any peripheral device.
However on startup and system resume it's possible that only the
auxiliary device is pm_runtime active, and the peripheral will only
become active during its io_init routine, leading to another
occurrence of the error reported by the pm_runtime framework:
rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active
This patch suggests aligning the sdw-master device status to that of
the auxiliary device. The difference between the two is completely
notional and their pm_status shouldn't be different during the startup
and system resume steps.
This problem was exposed by recent changes in the timing of the bus
reset, but was present in this driver since we introduced pm_runtime
support.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803065220.3823269-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As soon as the bus starts, physical peripheral devices may report as
ATTACHED and set their status with pm_runtime_set_active() in their
update_status()/io_init().
This is problematic with the existing code, since the parent
pm_runtime status is changed to "active" after starting the bus. This
creates a time window where the pm_runtime framework can report an
issue, e.g.
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch enables runtime_pm earlier to make sure the auxiliary
device is pm_runtime active after powering-up, but before starting the
bus.
This problem was exposed by recent changes in the timing of the bus
reset, but was present in this driver since we introduced pm_runtime
support.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803065220.3823269-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174946.4063995-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The soundwire subsystem uses two completion structures that allow
drivers to wait for soundwire device to become enumerated on the bus and
initialised by their drivers, respectively.
The code implementing the signalling is currently broken as it does not
signal all current and future waiters and also uses the wrong
reinitialisation function, which can potentially lead to memory
corruption if there are still waiters on the queue.
Not signalling future waiters specifically breaks sound card probe
deferrals as codec drivers can not tell that the soundwire device is
already attached when being reprobed. Some codec runtime PM
implementations suffer from similar problems as waiting for enumeration
during resume can also timeout despite the device already having been
enumerated.
Fixes: fb9469e54f ("soundwire: bus: fix race condition with enumeration_complete signaling")
Fixes: a90def0681 ("soundwire: bus: fix race condition with initialization_complete signaling")
Cc: stable@vger.kernel.org # 5.7
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Always add buses to the stream->master_list in a fixed order.
The unique bus->id is used to order the adding of buses to the
list.
This prevents lockdep asserts and possible deadlocks on streams
that have multiple buses.
sdw_acquire_bus_lock() takes bus_lock in the order that buses
are listed in stream->master_list. do_bank_switch() takes all
the msg_lock in the same order.
To prevent a lockdep assert, and a possible real deadlock, the
relative order of taking these mutexes must always be the same.
For example, if a stream takes the mutexes in the order
(bus0, bus1) lockdep will assert if another stream takes them
in the order (bus1, bus0).
More complex relative ordering will also assert, for example
if two streams take (bus0, bus1) and (bus1, bus2), then a third
stream takes (bus2, bus0).
Previously sdw_stream_add_master() simply added the given bus
to the end of the list, requiring the caller to guarantee that
buses are added in a fixed order. This isn't reasonable or
necessary - it's an internal implementation detail that should
not be exposed by the API. It doesn't really make sense when
there could be multiple independent calling drivers, to say
"you must add your buses in the same order as a different driver,
that you don't know about, added them".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230615141208.679011-2-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Give the bus_lock and msg_lock of each bus a different unique key
so that it is possible to acquire the locks of multiple buses
without lockdep asserting a possible deadlock.
Using mutex_init() to initialize a mutex gives all those mutexes
the same lock class. Lockdep checking treats it as an error to
attempt to take a mutex while already holding a mutex of the same
class. This causes a lockdep assert when sdw_acquire_bus_lock()
attempts to lock multiple buses, and when do_bank_switch() takes
multiple msg_lock.
[ 138.697350] WARNING: possible recursive locking detected
[ 138.697366] 6.3.0-test #1 Tainted: G E
[ 138.697380] --------------------------------------------
[ 138.697394] play/903 is trying to acquire lock:
[ 138.697409] ffff99b8c41aa8c8 (&bus->bus_lock){+.+.}-{3:3}, at:
sdw_prepare_stream+0x52/0x2e0
[ 138.697443]
but task is already holding lock:
[ 138.697468] ffff99b8c41af8c8 (&bus->bus_lock){+.+.}-{3:3}, at:
sdw_prepare_stream+0x52/0x2e0
[ 138.697493]
other info that might help us debug this:
[ 138.697521] Possible unsafe locking scenario:
[ 138.697540] CPU0
[ 138.697550] ----
[ 138.697559] lock(&bus->bus_lock);
[ 138.697570] lock(&bus->bus_lock);
[ 138.697581]
*** DEADLOCK ***
Giving each mutex a unique key allows multiple to be held
without triggering a lockdep assert. But note that it does not
allow them to be taken in one order then a different order.
If two mutexes are taken in the order A, B then they must
always be taken in that order otherwise they could deadlock.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230615141208.679011-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ace2x driver can be build with or without mlink support, but
when SND_SOC_SOF_HDA_MLINK is set to =m and soundwire is built-in,
it fails with a link error:
ld.lld: error: undefined symbol: hdac_bus_eml_sdw_wait_syncpu_unlocked
>>> referenced by intel_ace2x.c
>>> drivers/soundwire/intel_ace2x.o:(intel_link_power_up) in archive vmlinux.a
ld.lld: error: undefined symbol: hdac_bus_eml_sdw_sync_arm_unlocked
>>> referenced by intel_ace2x.c
>>> drivers/soundwire/intel_ace2x.o:(intel_sync_arm) in archive vmlinux.a
Add a Kconfig dependency that prevents that broken configuration but
still allows soundwire to be a loadable module instead.
Fixes: 4d1e2464a1 ("soundwire: intel_ace2x: add sync_arm/sync_go helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090932.2714714-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
