IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Distributed runs of rcutorture will need to start and stop jittering on
the remote hosts, which means that the commands must be communicated to
those hosts. The commit therefore causes kvm.sh to place these commands
in new TORTURE_JITTER_START and TORTURE_JITTER_STOP environment variables
to communicate them to the scripts that will set this up. In addition,
this commit causes kvm-test-1-run.sh to append these commands to each
generated qemu-cmd file, which allows any remotely executing script to
extract the needed commands from this file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, kvm-test-1-run.sh both builds and runs an rcutorture kernel,
which is inconvenient when it is necessary to re-run an old run or to
carry out a run on a remote system. This commit therefore extracts the
portion of kvm-test-1-run.sh that invoke qemu to actually run rcutorture
and places it in kvm-test-1-run-qemu.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When re-running old rcutorture builds, if the original run involved
gdb, the re-run also needs to do so. This commit therefore records the
TORTURE_KCONFIG_GDB_ARG environment variable into the qemu-cmd file so
that the re-run can access it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit creates jitterstart.sh and jitterstop.sh scripts that handle
the starting and stopping of the jitter.sh scripts. These must be sourced
using the bash "." command to allow the generated script to wait on the
backgrounded jitter.sh scripts.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "First Fault Register" (FFR) is an SVE register that mimics a
predicate register, but clears bits when a load or store fails to handle
an element of a vector. The supposed usage scenario is to initialise
this register (using SETFFR), then *read* it later on to learn about
elements that failed to load or store. Explicit writes to this register
using the WRFFR instruction are only supposed to *restore* values
previously read from the register (for context-switching only).
As the manual describes, this register holds only certain values, it:
"... contains a monotonic predicate value, in which starting from bit 0
there are zero or more 1 bits, followed only by 0 bits in any remaining
bit positions."
Any other value is UNPREDICTABLE and is not supposed to be "restored"
into the register.
The SVE test currently tries to write a signature pattern into the
register, which is *not* a canonical FFR value. Apparently the existing
setups treat UNPREDICTABLE as "read-as-written", but a new
implementation actually only stores canonical values. As a consequence,
the sve-test fails immediately when comparing the FFR value:
-----------
# ./sve-test
Vector length: 128 bits
PID: 207
Mismatch: PID=207, iteration=0, reg=48
Expected [cf00]
Got [0f00]
Aborted
-----------
Fix this by only populating the FFR with proper canonical values.
Effectively the requirement described above limits us to 17 unique
values over 16 bits worth of FFR, so we condense our signature down to 4
bits (2 bits from the PID, 2 bits from the generation) and generate the
canonical pattern from it. Any bits describing elements above the
minimum 128 bit are set to 0.
This aligns the FFR usage to the architecture and fixes the test on
microarchitectures implementing FFR in a more restricted way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319120128.29452-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-03-20
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 3 day(s) which contain
a total of 8 files changed, 155 insertions(+), 12 deletions(-).
The main changes are:
1) Use correct nops in fexit trampoline, from Stanislav.
2) Fix BTF dump, from Jean-Philippe.
3) Fix umd memory leak, from Zqiang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bpftool used to issue forward declarations for a struct used as part of
a pointer to array, which is invalid. Add a test to check that the
struct is fully defined in this case:
@@ -134,9 +134,9 @@
};
};
-struct struct_in_array {};
+struct struct_in_array;
-struct struct_in_array_typed {};
+struct struct_in_array_typed;
typedef struct struct_in_array_typed struct_in_array_t[2];
@@ -189,3 +189,7 @@
struct struct_with_embedded_stuff _14;
};
+struct struct_in_array {};
+
+struct struct_in_array_typed {};
+
...
#13/1 btf_dump: syntax:FAIL
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-3-jean-philippe@linaro.org
The ECN bit defines ECT(1) = 1, ECT(0) = 2. So inner 0x02 + outer 0x01
should be inner ECT(0) + outer ECT(1). Based on the description of
__INET_ECN_decapsulate, the final decapsulate value should be
ECT(1). So fix the test expect value to 0x01.
Before the fix:
TEST: VXLAN: ECN decap: 01/02->0x02 [FAIL]
Expected to capture 10 packets, got 0.
After the fix:
TEST: VXLAN: ECN decap: 01/02->0x01 [ OK ]
Fixes: a0b61f3d8ebf ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SGX device file (/dev/sgx_enclave) is unusual in that it requires
execute permissions. It has to be both "chmod +x" *and* be on a
filesystem without 'noexec'.
In the future, udev and systemd should get updates to set up systems
automatically. But, for now, nobody's systems do this automatically,
and everybody gets error messages like this when running ./test_sgx:
0x0000000000000000 0x0000000000002000 0x03
0x0000000000002000 0x0000000000001000 0x05
0x0000000000003000 0x0000000000003000 0x03
mmap() failed, errno=1.
That isn't very user friendly, even for forgetful kernel developers.
Further, the test case is rather haphazard about its use of fprintf()
versus perror().
Improve the error messages. Use perror() where possible. Lastly,
do some sanity checks on opening and mmap()ing the device file so
that we can get a decent error message out to the user.
Now, if your user doesn't have permission, you'll get the following:
$ ls -l /dev/sgx_enclave
crw------- 1 root root 10, 126 Mar 18 11:29 /dev/sgx_enclave
$ ./test_sgx
Unable to open /dev/sgx_enclave: Permission denied
If you then 'chown dave:dave /dev/sgx_enclave' (or whatever), but
you leave execute permissions off, you'll get:
$ ls -l /dev/sgx_enclave
crw------- 1 dave dave 10, 126 Mar 18 11:29 /dev/sgx_enclave
$ ./test_sgx
no execute permissions on device file
If you fix that with "chmod ug+x /dev/sgx" but you leave /dev as
noexec, you'll get this:
$ mount | grep "/dev .*noexec"
udev on /dev type devtmpfs (rw,nosuid,noexec,...)
$ ./test_sgx
ERROR: mmap for exec: Operation not permitted
mmap() succeeded for PROT_READ, but failed for PROT_EXEC
check that user has execute permissions on /dev/sgx_enclave and
that /dev does not have noexec set: 'mount | grep "/dev .*noexec"'
That can be fixed with:
mount -o remount,noexec /devESC
Hopefully, the combination of better error messages and the search
engines indexing this message will help people fix their systems
until we do this properly.
[ bp: Improve error messages more. ]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20210318194301.11D9A984@viggo.jf.intel.com
Add Makefile infra to specify multi-file BPF object files (and derivative
skeletons). Add first selftest validating BPF static linker can merge together
successfully two independent BPF object files and resulting object and
skeleton are correct and usable.
Use the same F(F(F(X))) = F(F(X)) identity test on linked object files as for
the case of single BPF object files.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-13-andrii@kernel.org
Pass all individual BPF object files (generated from progs/*.c) through
`bpftool gen object` command to validate that BPF static linker doesn't
corrupt them.
As an additional sanity checks, validate that passing resulting object files
through linker again results in identical ELF files. Exact same ELF contents
can be guaranteed only after two passes, as after the first pass ELF sections
order changes, and thus .BTF.ext data sections order changes. That, in turn,
means that strings are added into the final BTF string sections in different
order, so .BTF strings data might not be exactly the same. But doing another
round of linking afterwards should result in the identical ELF file, which is
checked with additional `diff` command.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-12-andrii@kernel.org
Trigger vmlinux.h and BPF skeletons re-generation if detected that bpftool was
re-compiled. Otherwise full `make clean` is required to get updated skeletons,
if bpftool is modified.
Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-11-andrii@kernel.org
Test for the KVM_SET_BOOT_CPU_ID ioctl.
Check that it correctly allows to change the BSP vcpu.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318151624.490861-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As in kvm_ioctl and _kvm_ioctl, add
the respective _vm_ioctl for vm_ioctl.
_vm_ioctl invokes an ioctl using the vm fd,
leaving the caller to test the result.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318151624.490861-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test the KVM_GET_MSR_FEATURE_INDEX_LIST
and KVM_GET_MSR_INDEX_LIST ioctls.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318145629.486450-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a selftest for commit e21aa341785c ("bpf: Fix fexit trampoline.")
to make sure that attaching fexit prog to a sleeping kernel function
will trigger appropriate trampoline and program destruction.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210318004523.55908-1-alexei.starovoitov@gmail.com
Introduce a new selftest for Hyper-V clocksources (MSR-based reference TSC
and TSC page). As a starting point, test the following:
1) Reference TSC is 1Ghz clock.
2) Reference TSC and TSC page give the same reading.
3) TSC page gets updated upon KVM_SET_CLOCK call.
4) TSC page does not get updated when guest opted for reenlightenment.
5) Disabled TSC page doesn't get updated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210318140949.1065740-1-vkuznets@redhat.com>
[Add a host-side test using TSC + KVM_GET_MSR too. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
test_syscall_vdso_32 ended up with an executable stacks because the asm
was missing the annotation that says that it is modern and doesn't need
an executable stack. Add the annotation.
This was missed in commit aeaaf005da1d ("selftests/x86: Add missing
.note.GNU-stack sections").
Fixes: aeaaf005da1d ("selftests/x86: Add missing .note.GNU-stack sections")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/487ed5348a43c031b816fa7e9efedb75dc324299.1614877299.git.luto@kernel.org
Now that bpftool generates NULL definition as part of vmlinux.h, drop custom
NULL definition in skb_pkt_end.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20210317200510.1354627-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-18
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 336 insertions(+), 94 deletions(-).
The main changes are:
1) Fix fexit/fmod_ret trampoline for sleepable programs, and also fix a ftrace
splat in modify_ftrace_direct() on address change, from Alexei Starovoitov.
2) Fix two oob speculation possibilities that allows unprivileged to leak mem
via side-channel, from Piotr Krysiuk and Daniel Borkmann.
3) Fix libbpf's netlink handling wrt SOCK_CLOEXEC, from Kumar Kartikeya Dwivedi.
4) Fix libbpf's error handling on failure in getting section names, from Namhyung Kim.
5) Fix tunnel collect_md BPF selftest wrt Geneve option handling, from Hangbin Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up test_verifier error messages for the case where the original error
message changed, or for the case where pointer alu errors differ between
privileged and unprivileged tests. Also, add alternative tests for keeping
coverage of the original verifier rejection error message (fp alu), and
newly reject map_ptr += rX where rX == 0 given we now forbid alu on these
types for unprivileged. All test_verifier cases pass after the change. The
test case fixups were kept separate to ease backporting of core changes.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
q_in_vni_veto.sh is not needed anymore because VxLAN with an 802.1ad
bridge and VxLAN with an 802.1d bridge can coexist.
Remove the test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Configure VxLAN with an 802.1ad bridge and VxLAN with an 802.1d bridge
at the same time in same switch, verify that traffic passed as expected.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Glibc's sleep() switched to clock_nanosleep() from nanosleep(), and thus
syscalls:sys_enter_nanosleep tracepoint is not hitting which is causing
testcase failure. Instead of depending on glibc sleep(), call nanosleep()
systemcall directly.
Before:
# ./get_cgroup_id_user
...
main:FAIL:compare_cgroup_id kern cgid 0 user cgid 483
After:
# ./get_cgroup_id_user
...
main:PASS:compare_cgroup_id
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210316153048.136447-1-ravi.bangoria@linux.ibm.com
Make sure egress sampling configuration only fails on Spectrum-1, given
that mlxsw now supports it on Spectrum-{2,3}.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that packets are sampled when tc-sample is used with matchall
egress binding and flower classifier. Verify that when performing
sampling on egress the end-to-end latency is reported as metadata.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Build selftests, bpftool, and libbpf in debug mode with DWARF data to
facilitate easier debugging.
In terms of impact on building and running selftests. Build is actually faster
now:
BEFORE: make -j60 380.21s user 37.87s system 1466% cpu 28.503 total
AFTER: make -j60 345.47s user 37.37s system 1599% cpu 23.939 total
test_progs runtime seems to be the same:
BEFORE:
real 1m5.139s
user 0m1.600s
sys 0m43.977s
AFTER:
real 1m3.799s
user 0m1.721s
sys 0m42.420s
Huge difference is being able to debug issues throughout test_progs, bpftool,
and libbpf without constantly updating 3 Makefiles by hand (including GDB
seeing the source code without any extra incantations).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-5-andrii@kernel.org
xsk_ring_prod__reserve() doesn't necessarily set idx in some conditions, so
from static analysis point of view compiler is right about the problems like:
In file included from xdpxceiver.c:92:
xdpxceiver.c: In function ‘xsk_populate_fill_ring’:
/data/users/andriin/linux/tools/testing/selftests/bpf/tools/include/bpf/xsk.h:119:20: warning: ‘idx’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return &addrs[idx & fill->mask];
~~~~^~~~~~~~~~~~
xdpxceiver.c:300:6: note: ‘idx’ was declared here
u32 idx;
^~~
xdpxceiver.c: In function ‘tx_only’:
xdpxceiver.c:596:30: warning: ‘idx’ may be used uninitialized in this function [-Wmaybe-uninitialized]
struct xdp_desc *tx_desc = xsk_ring_prod__tx_desc(&xsk->tx, idx + i);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix two warnings reported by compiler by pre-initializing variable.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-4-andrii@kernel.org
When fixing the bpf test_tunnel.sh geneve failure. I only fixed the IPv4
part but forgot the IPv6 issue. Similar with the IPv4 fixes 557c223b643a
("selftests/bpf: No need to drop the packet when there is no geneve opt"),
when there is no tunnel option and bpf_skb_get_tunnel_opt() returns error,
there is no need to drop the packets and break all geneve rx traffic.
Just set opt_class to 0 and keep returning TC_ACT_OK at the end.
Fixes: 557c223b643a ("selftests/bpf: No need to drop the packet when there is no geneve opt")
Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/bpf/20210309032214.2112438-1-liuhangbin@gmail.com
Augment the current set of options that are accessible via
bpf_{g,s}etsockopt to also support SO_REUSEPORT.
Signed-off-by: Manu Bretelle <chantra@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210310182305.1910312-1-chantra@fb.com
Test that packets are sampled when tc-sample is used and that reported
metadata is correct. Two sets of hosts (with and without LAG) are used,
since metadata extraction in mlxsw is a bit different when LAG is
involved.
# ./tc_sample.sh
TEST: tc sample rate (forward) [ OK ]
TEST: tc sample rate (local receive) [ OK ]
TEST: tc sample maximum rate [ OK ]
TEST: tc sample group conflict test [ OK ]
TEST: tc sample iif [ OK ]
TEST: tc sample lag iif [ OK ]
TEST: tc sample oif [ OK ]
TEST: tc sample lag oif [ OK ]
TEST: tc sample out-tc [ OK ]
TEST: tc sample out-tc-occ [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test various aspects of psample functionality over netdevsim and in
particular test that the psample module correctly reports the provided
metadata.
Example:
# ./psample.sh
TEST: psample enable / disable [ OK ]
TEST: psample group number [ OK ]
TEST: psample metadata [ OK ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The join self tests previously used the '-c' command line option to
enable creation of pcap files for the tests that run, but the change to
allow running a subset of the join tests made overlapping use of that
option.
Restore the capture functionality with '-c' and move the syncookie test
option to '-k'.
Fixes: 1002b89f23ea ("selftests: mptcp: add command line arguments for mptcp_join.sh")
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the testcases for removing a list of addresses. Used
the netlink to flush the addresses in the testcases.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The removing testcases can only delete the addresses from id 1, this
patch added the support for deleting the addresses from any id that user
set.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the removing testcases used two zeros as arguments for chk_rm_nr
like this: chk_rm_nr 0 0. This doesn't mean that no RM_ADDR has been sent.
It only means that RM_ADDR had been sent in the opposite direction that
chk_rm_nr is checking.
This patch added a new argument invert for chk_rm_nr to allow it can
check the RM_ADDR from the opposite direction.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test various aspects of the resilient nexthop group offload API on top
of the netdevsim implementation. Both good and bad flows are tested.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Co-developed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a resilient nexthop objects version of gre_multipath_nh.sh. Test
that both IPv4 and IPv6 overlays work with resilient nexthop groups
where the nexthops are two GRE tunnels.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify that IPv4 and IPv6 multipath forwarding works correctly with
resilient nexthop groups and with different weights.
Test that when the idle timer is not zero, the resilient groups are not
rebalanced - because the nexthop buckets are considered active - and the
initial weights (1:1) are used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases for resilient nexthop groups. Exhaustive forwarding tests
are added separately under net/forwarding/.
Examples:
# ./fib_nexthops.sh -t basic_res
Basic resilient nexthop group functional tests
----------------------------------------------
TEST: Add a nexthop group with default parameters [ OK ]
TEST: Get a nexthop group with default parameters [ OK ]
TEST: Get a nexthop group with non-default parameters [ OK ]
TEST: Add a nexthop group with 0 buckets [ OK ]
TEST: Replace nexthop group parameters [ OK ]
TEST: Get a nexthop group after replacing parameters [ OK ]
TEST: Replace idle timer [ OK ]
TEST: Get a nexthop group after replacing idle timer [ OK ]
TEST: Replace unbalanced timer [ OK ]
TEST: Get a nexthop group after replacing unbalanced timer [ OK ]
TEST: Replace with no parameters [ OK ]
TEST: Get a nexthop group after replacing no parameters [ OK ]
TEST: Replace nexthop group type - implicit [ OK ]
TEST: Replace nexthop group type - explicit [ OK ]
TEST: Replace number of nexthop buckets [ OK ]
TEST: Get a nexthop group after replacing with invalid parameters [ OK ]
TEST: Dump all nexthop buckets [ OK ]
TEST: Dump all nexthop buckets in a group [ OK ]
TEST: Dump all nexthop buckets with a specific nexthop device [ OK ]
TEST: Dump all nexthop buckets with a specific nexthop identifier [ OK ]
TEST: Dump all nexthop buckets in a non-existent group [ OK ]
TEST: Dump all nexthop buckets in a non-resilient group [ OK ]
TEST: Dump all nexthop buckets using a non-existent device [ OK ]
TEST: Dump all nexthop buckets with invalid 'groups' keyword [ OK ]
TEST: Dump all nexthop buckets with invalid 'fdb' keyword [ OK ]
TEST: Get a valid nexthop bucket [ OK ]
TEST: Get a nexthop bucket with valid group, but invalid index [ OK ]
TEST: Get a nexthop bucket from a non-resilient group [ OK ]
TEST: Get a nexthop bucket from a non-existent group [ OK ]
Tests passed: 29
Tests failed: 0
# ./fib_nexthops.sh -t ipv4_large_res_grp
IPv4 large resilient group (128k buckets)
-----------------------------------------
TEST: Dump large (x131072) nexthop buckets [ OK ]
Tests passed: 1
Tests failed: 0
# ./fib_nexthops.sh -t ipv6_large_res_grp
IPv6 large resilient group (128k buckets)
-----------------------------------------
TEST: Dump large (x131072) nexthop buckets [ OK ]
Tests passed: 1
Tests failed: 0
# ./fib_nexthops.sh -t ipv4_res_torture
IPv4 runtime resilient nexthop group torture
--------------------------------------------
TEST: IPv4 resilient nexthop group torture test [ OK ]
Tests passed: 1
Tests failed: 0
# ./fib_nexthops.sh -t ipv6_res_torture
IPv6 runtime resilient nexthop group torture
--------------------------------------------
TEST: IPv6 resilient nexthop group torture test [ OK ]
Tests passed: 1
Tests failed: 0
# ./fib_nexthops.sh -t ipv4_res_grp_fcnal
IPv4 resilient groups functional
--------------------------------
TEST: Nexthop group updated when entry is deleted [ OK ]
TEST: Nexthop buckets updated when entry is deleted [ OK ]
TEST: Nexthop group updated after replace [ OK ]
TEST: Nexthop buckets updated after replace [ OK ]
TEST: Nexthop group updated when entry is deleted - nECMP [ OK ]
TEST: Nexthop buckets updated when entry is deleted - nECMP [ OK ]
TEST: Nexthop group updated after replace - nECMP [ OK ]
TEST: Nexthop buckets updated after replace - nECMP [ OK ]
Tests passed: 8
Tests failed: 0
# ./fib_nexthops.sh -t ipv6_res_grp_fcnal
IPv6 resilient groups functional
--------------------------------
TEST: Nexthop group updated when entry is deleted [ OK ]
TEST: Nexthop buckets updated when entry is deleted [ OK ]
TEST: Nexthop group updated after replace [ OK ]
TEST: Nexthop buckets updated after replace [ OK ]
TEST: Nexthop group updated when entry is deleted - nECMP [ OK ]
TEST: Nexthop buckets updated when entry is deleted - nECMP [ OK ]
TEST: Nexthop group updated after replace - nECMP [ OK ]
TEST: Nexthop buckets updated after replace - nECMP [ OK ]
Tests passed: 8
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Co-developed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The lines with the IPv4 and IPv6 test cases are already very long and
more test cases will be added in subsequent patches.
List each test case in a different line to make it easier to extend the
test with more test cases.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing
- Fix pfn_valid() not to reject all ZONE_DEVICE memory
- Fix memory tagging setup for hotplugged memory regions
- Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled
- Fix accidental truncation of CPU PMU event counters
- Fix error code initialisation when failing probe of DMC620 PMU
- Fix return value initialisation for sve-ptrace selftest
- Drop broken support for CMDLINE_EXTEND
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmBLU98QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNEhpB/wMahRmJQvjJtt/PqKU9m46tRbHRT5PC2WQ
256DoYtexSrGa6DrBoSteUsaPuRo3YcfDnXf1wbTYikoXoKxbLvm/9IQivfyrd3S
M4DjeaemhcZdg6YKrs/0s2UOzPV8O3kKWfs58gJ2oP/xHA7uqcZJxlIDd7H4/bX+
M0wQvBnJEEb9mg3Hxo2WZLRUKK3nPtZ5hGz9RADOHkyCt+jPr3UtAe69iZcQ4Udd
X2z3Dc1CZf3VF9Ujkylllqxo2eaLKXGie7r77o1AgXwPEedZD+Q9vn/viVuluRcc
slZQyW/kRRGCZ92RT2DwLZsixsBKJtZxj+AEoJSBIrsCUUXXP4xv
=e3YJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a smattering of changes all over the place which we've
acrued since -rc1. To my knowledge, there aren't any pending issues at
the moment, but there's still plenty of time for something else to
crop up...
Summary:
- Fix booting a 52-bit-VA-aware kernel on Qualcomm Amberwing
- Fix pfn_valid() not to reject all ZONE_DEVICE memory
- Fix memory tagging setup for hotplugged memory regions
- Fix KASAN tagging in page_alloc() when DEBUG_VIRTUAL is enabled
- Fix accidental truncation of CPU PMU event counters
- Fix error code initialisation when failing probe of DMC620 PMU
- Fix return value initialisation for sve-ptrace selftest
- Drop broken support for CMDLINE_EXTEND"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm_dmc620_pmu: Fix error return code in dmc620_pmu_device_probe()
arm64: mm: remove unused __cpu_uses_extended_idmap[_level()]
arm64: mm: use a 48-bit ID map when possible on 52-bit VA builds
arm64: perf: Fix 64-bit event counter read truncation
arm64/mm: Fix __enable_mmu() for new TGRAN range values
kselftest: arm64: Fix exit code of sve-ptrace
arm64: mte: Map hotplugged memory as Normal Tagged
arm64: kasan: fix page_alloc tagging with DEBUG_VIRTUAL
arm64/mm: Reorganize pfn_valid()
arm64/mm: Fix pfn_valid() for ZONE_DEVICE based memory
arm64/mm: Drop THP conditionality from FORCE_MAX_ZONEORDER
arm64/mm: Drop redundant ARCH_WANT_HUGE_PMD_SHARE
arm64: Drop support for CMDLINE_EXTEND
arm64: cpufeatures: Fix handling of CONFIG_CMDLINE for idreg overrides
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-10
The following pull-request contains BPF updates for your *net* tree.
We've added 8 non-merge commits during the last 5 day(s) which contain
a total of 11 files changed, 136 insertions(+), 17 deletions(-).
The main changes are:
1) Reject bogus use of vmlinux BTF as map/prog creation BTF, from Alexei Starovoitov.
2) Fix allocation failure splat in x86 JIT for large progs. Also fix overwriting
percpu cgroup storage from tracing programs when nested, from Yonghong Song.
3) Fix rx queue retrieval in XDP for multi-queue veth, from Maciej Fijalkowski.
4) Fix bpf_check_mtu() helper API before freeze to have mtu_len as custom skb/xdp
L3 input length, from Jesper Dangaard Brouer.
5) Fix inode_storage's lookup_elem return value upon having bad fd, from Tal Lossos.
6) Fix bpftool and libbpf cross-build on MacOS, from Georgi Valkov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
