IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In some projects, the device ID register is not read correctly.
This patch helps to verify the issue is caused from i2c host or client.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20201209091308.2823-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cap-less mode is useful e.g. if the headphones are used as an antenna
for a FM radio, so that the signal is not altered. For everything else,
we want the cap-couple mode.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-5-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
When using cap-coupled outputs, the RUP/RDO can take much longer than
the 100ms timeout we used to have. Increase that timeout to one second.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In case a poll for RUP times out, we might be left with some IRQ flags
that should be cleared before the next power on.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201207125338.119397-2-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_trigger() calls DAI/Component/Link trigger,
but some of them might be failed.
static int soc_pcm_trigger(...)
{
...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = snd_soc_link_trigger(substream, cmd);
if (ret < 0)
break;
(*) ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_dai_trigger(substream, cmd);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = snd_soc_pcm_dai_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_pcm_component_trigger(substream, cmd);
if (ret < 0)
break;
ret = snd_soc_link_trigger(substream, cmd);
break;
}
...
}
For example, if soc_pcm_trigger() failed at (*) point,
we need to rollback previous succeeded trigger.
This patch adds trigger mark for DAI/Component/Link,
and do STOP if START/RESUME/PAUSE_RELEASE were failed.
Because it need to use new rollback parameter,
we need to modify DAI/Component/Link trigger functions in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6uycssd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dpcm_be_dai_trigger() is calling dpcm_do_trigger()
at each SNDRV_PCM_TRIGGER_xxx (1).
int dpcm_be_dai_trigger(...)
{
for_each_dpcm_be(fe, stream, dpcm) {
(B) ...
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_RESUME:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_STOP:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_SUSPEND:
...
(1) ret = dpcm_do_trigger(...);
...
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
...
(1) ret = dpcm_do_trigger(...);
...
}
}
}
But it is just very verbose and duplicated function.
Because We can indicate dev_dbg() (A) at dpcm_be_dai_trigger() (B).
And dev_err() (C) is not needed because soc_pcm_trigger() itself
indicates error message when error.
static int dpcm_do_trigger(...)
{
int ret;
(A) dev_dbg(...);
ret = soc_pcm_trigger(substream, cmd);
if (ret < 0)
(C) dev_err(...);
return ret;
}
This patch replace dpcm_do_trigger() to soc_pcm_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blfecssk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These error paths return success but they should return -EINVAL.
Fixes: 97ed3e509e ("ASoC: max98390: Fix potential crash during param fw loading")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9B0uz4svyNTqeMb@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Tha ARCHOS Cesium 140 tablet has problem with the jack-sensing,
thus the heaset functions are not working.
Add quirk for this model to select the correct input map, jack-detect
options and channel map to enable jack sensing and headset microphone.
This device uses IN1 for its internal MIC and JD2 for jack-detect.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201208060414.27646-1-chiu@endlessos.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS laptop Q524UQK with ALC255 codec can't detect the headset
microphone until ALC255_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201209045730.9972-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To help in debugging issues with DisplayPort Multi-Stream Transport (aka
DP-MST) support, print information of active connections for each device
of a display audio pin widget.
Example output with the patch with two monitors connected to a DP-MST hub:
Devices: 4
Dev 00: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Dev 01: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
*Dev 02: PD = 1, ELDV = 1, IA = 0, Connections [ 0x03 0x05* 0x07 0x09 ]
Dev 03: PD = 0, ELDV = 0, IA = 0, Connections [ 0x03* 0x05 0x07 0x09 ]
Connection: 4
0x03 0x05* 0x07 0x09
Format of existing "Connection:" entry is left intact to keep
compatibility.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201208185736.2877541-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi All,
Here are 2 simple fixes which are necessary to make the
cht_bsw_nau8824 machine driver work together with the
sof-audio-acpi driver.
Note that atm the sof topology files are missing a .tplg
file for this setup. Simply copying over the standard
sof-byte-codec.tplg file does the trick, but then some
mixer setting changes are necessary to fix the right
speaker/headphones channel not working; and those mixer
settings break the right channel when used with the
sst-acpi driver.
I've been trying to fix this at the tplg level so that
we do not need to change the mixer settings, but no luck
sofar. I'll post a RFC with the topology changes which
I have and we can discuss this further there.
These 2 simple fixes are necessary to make the sof-audio-acpi
driver work regardless of the topology issue.
Regards,
Hans
cz_da7219_init() does not check the return values of clk_get(),
while da7219_clk_enable() calls clk_set_rate() to dereference
the pointers.
Add checks to fix the problems.
Also, change clk_get() to devm_clk_get() to avoid data leak after
failures.
Fixes: bb24a31ed5 ("ASoC: AMD: Configure wclk and bclk of master codec")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201204063610.513556-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cx2072x codec driver defines multiple DAIs with the same stream
name "Playback" and "Capture". Although the current code works more
or less as is as the secondary streams are never used, it still leads
the error message like:
debugfs: File 'Playback' in directory 'dapm' already present!
debugfs: File 'Capture' in directory 'dapm' already present!
Fix it by renaming the secondary streams to unique names.
Fixes: a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201208135154.9188-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is initially designed for sound card using HDMI
interface on i.MX platform. There is internal HDMI IP or
external HDMI modules connect with SAI or AUD2HTX interface.
It supports both transmitter and receiver devices.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1607251319-5821-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd-soc-sst-acpi driver does not care about the id specified for
the SSP2-Codec DAI, but it does matter for the snd-sof-acpi driver;
and when it is not 0 then the snd-sof-acpi driver does not work.
Set the SSP2-Codec DAI id to 0, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When using the snd-soc-sst-acpi driver then the compress-cpu-dai bits are
not used, the cht_bsw_nau8824 machine-driver is the only BYT/CHT driver
defining them.
When using the snd-sof-acpi driver then the presence of the
compress-cpu-dai bits breaks things because the sof topology file for
by/cht devices does not contain routing info for them.
Drop the compress-cpu-dai bits, fixing the snd-sof-acpi driver not
working on devices using the cht_bsw_nau8824 machine-driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201206122436.13553-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "filter" debugfs file defines the log levels used by
the firmware and reported by sof-logger.
The file contains the formatted entry list, where each entry
follows the following syntax in plain text:
log_level uuid_id pipe_id comp_id;
This file may be updated by userspace applications such sof-logger,
or directly by the user during debugging process.
An unused (wildcard) pipe_id or comp_id value should be set to -1,
uuid_id is hexadecimal value, so when unused then should be set to 0.
When the file is modified, an IPC command is sent to FW with new
trace levels for selected components in filter elements list.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201204165014.2697903-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A recent change removed the call to send the DAPM_STREAM_STOP
event in dpcm_fe_dai_shutdown. But this causes a regression
when a PCM prepare is not paired with a hw_free. So, add
the DAPM_STREAM_STOP event back to dpcm_fe_dai_shutdown()
to fix this.
The new sequence would be:
soc_pcm_prepare()
-> SND_SOC_DAPM_STREAM_START
soc_pcm_hw_free()
-> soc_pcm_hw_free()
-> SND_SOC_DAPM_STREAM_STOP
dpcm_fe_dai_shutdown()
-> SND_SOC_DAPM_STREAM_STOP
Note that the DAPM_STREAM_STOP will be called twice but it seems
harmless.
Fixes: a27b421f1d ('ASoC: pcm: call snd_soc_dapm_stream_stop() in soc_pcm_hw_clean')
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201202193343.912942-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS laptop X430UN with ALC256 can't detect the headset microphone
until ALC256_FIXUP_ASUS_MIC_NO_PRESENCE quirk applied.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201207072755.16210-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks. That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.
For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.
Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This change could fix 2 issues on this machine:
- the bass speaker's output volume can't be adjusted, that is because
the bass speaker is routed to the DAC (Nid 0x6) which has no volume
control.
- after plugging a headset with vol+, vol- and pause buttons on it,
press those buttons, nothing happens, this means those buttons
don't work at all. This machine has alc287 codec, need to add the
codec id to the disable/enable_headset_jack_key(), then the headset
button could work.
The quirk of ALC285_FIXUP_THINKPAD_HEADSET_JACK could fix both of these
2 issues.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20201205051130.8122-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_PM is disabled, we get a warning for unused functions:
sound/soc/fsl/fsl_aud2htx.c:261:12: error: unused function 'fsl_aud2htx_runtime_suspend' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_suspend(struct device *dev)
sound/soc/fsl/fsl_aud2htx.c:271:12: error: unused function 'fsl_aud2htx_runtime_resume' [-Werror,-Wunused-function]
static int fsl_aud2htx_runtime_resume(struct device *dev)
Mark these as __maybe_unused to avoid the warning without adding
an #ifdef.
Fixes: 8a24c834c0 ("ASoC: fsl_aud2htx: Add aud2htx module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20201203222900.1042578-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data for two rt1011 speaker amplifiers on
SSP1 and rt5682 on SSP0 for TGL platform. DAI format for rt1011 is
leveraged from cml_rt1011_rt5682 which is 4-slot tdm with 100fs bclk.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20201203154010.29464-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Compile-testing this driver on an older platform without CONFIG_COMMON_CLK fails with
ERROR: modpost: "clk_set_min_rate" [sound/soc/atmel/snd-soc-mchp-spdifrx.ko] undefined!
Make this is a strict dependency.
Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20201203223815.1353451-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc points out a memory area that is copied to a device
but not initialized:
sound/soc/codecs/cros_ec_codec.c: In function 'i2s_rx_event':
arch/x86/include/asm/string_32.h:83:20: error: '*((void *)&p+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
83 | *((int *)to + 1) = *((int *)from + 1);
Initialize all the unused fields to zero.
Fixes: 727f1c71c7 ("ASoC: cros_ec_codec: refactor I2S RX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201203225458.1477830-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8oseA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqGQCdF2TND5jjcETWHIrunPAX6iEDLecAnjyIMc4q
cIr5piwCq+m6/S2gSCpA
=t7EL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/KnpUACgkQJNaLcl1U
h9CWvQf9EdHZFlsDiP8PbbSLtMzpkqaJOlmg3A1Rn6XOYjztDEDQQp12vYC9jOmJ
PkBz8kh+0dohTt6TIx5IEt+r1pbYWAzFOkX7v3QzYp8+nrmd1bT/RDRglOrmydLH
ntd9XNE1BA8k9n4YQQBWrspDEnwnpCygSw4lP/QXz7OyyhnZ7fYGOG3hPXKw+Sdj
gQugmSAnUYaVti4d7K6Cuhj08HT13FvGFqrkLYljTmsnnVw0T4kXNFtiODMe1QMq
YYeKiHCFI8ysk2hK0sYdmwr5rz5eWT5mGnSXPGsD3o876NF1uw+Q5iTX57uydDrp
GijjnCOGz+yZ7dfBi2MAflP5Xsw4ew==
=SVwj
-----END PGP SIGNATURE-----
Merge tag 'auxbus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into asoc-5.11
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
setting clock rate on child clocks without a parent clock rate will
result in zero clk rate for child. This also means that when audio
is started dsp will attempt to access registers without enabling
clock resulting in board boot up.
Fix this by adding the missing parent clock rate.
Fixes: 520a1c396d ("ASoC: q6afe-clocks: add q6afe clock controller")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201204164228.1826-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
jz4740_i2s_set_sysclk() does not check the return values of clk_get(),
while the file dereferences the pointers in clk_put().
Add the missed checks to fix it.
Fixes: 11bd3dd1b7 ("ASoC: Add JZ4740 ASoC support")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201203144227.418194-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adapt STM32 DFSDM driver to a change in iio_channel_get_all_cb() API.
The callback pointer becomes a requested parameter of this API,
so add a dummy callback to be given as parameter of this function.
However, the stm32_dfsdm_get_buff_cb() API is still used instead,
to optimize DMA transfers.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201121161457.957-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. For the shutdown callback
it's ps3_system_bus_shutdown() which ignores the return value.
To simplify the quest to make struct device_driver::remove return void,
let struct ps3_system_bus_driver::remove return void, too. All users
already unconditionally return 0, this commit makes it obvious that
returning an error code is a bad idea and ensures future users behave
accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126165950.2554997-2-u.kleine-koenig@pengutronix.de
The remove callback is only called for devices that were probed
successfully before. As the matching probe function cannot complete
without error if dev->match_id != PS3_MATCH_ID_SOUND, we don't have to
check this here.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126165950.2554997-1-u.kleine-koenig@pengutronix.de
The si476x codec is used for FM radio function on i.MX6
auto board, it only supports recording function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1606708668-28786-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .data field is only used to pass the string name to
platform_device_register_data().
Pass the string name directly to make the code simpler.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201203013439.10617-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The series supports new machines with rt1015p and rt5682. Reuses most of
the code in mt8192-mt6359-rt1015-rt5682.c.
The first 3 patches refactor the existing mt8192-mt6359-rt1015-rt5682.c.
For easier to support newly added components later.
The 4th patch fixes a typo in DT bindings document.
The 5th patch proposes a new compatible string "mt8192_mt6359_rt1015p_rt5682"
for machines with rt1015p and rt5682.
The 6th patch reuses the existing machine driver to support machines with
rt1015p and rt5682.
Tzung-Bi Shih (6):
ASoC: mediatek: mt8192: rename common symbols
ASoC: mediatek: mt8192: extract rt1015_rt5682 specific DAI link
ASoC: mediatek: mt8192: move rt1015_rt5682 specific data
ASoC: dt-bindings: mt8192-mt6359: fix typo in the example
ASoC: dt-bindings: mt8192-mt6359: add new compatible for using rt1015p
ASoC: mediatek: mt8192: support rt1015p_rt5682
.../sound/mt8192-mt6359-rt1015-rt5682.yaml | 6 +-
sound/soc/mediatek/Kconfig | 1 +
.../mt8192/mt8192-mt6359-rt1015-rt5682.c | 171 +++++++++++++-----
3 files changed, 129 insertions(+), 49 deletions(-)
--
2.29.2.454.gaff20da3a2-goog
SND_SOC_ADAU1372_I2C and SND_SOC_ADAU1372_SPI prpoerly select the REGMAP
config they need but forget to depend on the underlying bus.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201130215626.2400999-1-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "decimator" variable is in the 0-7 range and it's unsigned so there
is no need to check for negative values.
Fixes: 908e6b1df2 ("ASoC: codecs: lpass-va-macro: Add support to VA Macro")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X8c5gjZO7YN/CFsq@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Supports machines with rt1015p and rt5682. Uses new proposed compatible
string "mt8192_mt6359_rt1015p_rt5682".
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201201132614.1691352-7-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extracts rt1015_rt5682 specific DAI link from the common one. Fills the
DAI link data according to of_match.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201201132614.1691352-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renames common symbols from "mt8192_mt6359_rt1015_rt5682" to
"mt8192_mt6359".
They will share between a few machine drivers on MT8192 and MT6359
with some different audio components.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20201201132614.1691352-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Speaker amp's SSP bclk configuration was changed in the topology file to be
based on 12.288MHz and dai_ops->hw_params is based on s32le format.
But, the TDM slot size remained set to 24 bits.
This inconsistency created audible noises and needs to be corrected.
This patch updates TDM slot width to 32.
Fixes: bc7477fc2a ("ASoC: Intel: Boards: tgl_max98373: Update TDM configuration in hw_params")
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201201211150.433472-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Series introducing a modified boot sequence for the Intel Ice Lake
platform. While no bugs are currently open for this, the current
DSP boot implementation does not follow the full programming sequence.
This patchset is the first instance where SOF driver uses data in
the extended manifest (part of the firmware binary), to influence
the boot process. IPC cannot be used to get this information, as it
is already needed for early boot.
This change is backwards compatible with old firmware versions,
where extended manifest is not available.
Fred Oh (5):
ASoC: SOF: ops: add parse_platform_ext_manifest() op
ASoC: SOF: Intel: hda: define parse_platform_ext_manifest op
ASoC: SOF: ext_manifest: parse cavs extra config data elem
ASoC: SOF: ops: modify the signature of stall op
ASoC: SOF: Intel: hda: add sof_icl_ops for ICL platforms
include/sound/sof/ext_manifest.h | 1 +
sound/soc/sof/intel/Makefile | 2 +-
sound/soc/sof/intel/apl.c | 3 +
sound/soc/sof/intel/cnl.c | 19 +---
sound/soc/sof/intel/ext_manifest.h | 35 +++++++
sound/soc/sof/intel/hda-loader.c | 100 ++++++++++++++++++++
sound/soc/sof/intel/hda.h | 11 +++
sound/soc/sof/intel/icl.c | 145 +++++++++++++++++++++++++++++
sound/soc/sof/intel/tgl.c | 3 +
sound/soc/sof/loader.c | 3 +
sound/soc/sof/ops.h | 14 ++-
sound/soc/sof/sof-pci-dev.c | 2 +-
sound/soc/sof/sof-priv.h | 7 +-
13 files changed, 324 insertions(+), 21 deletions(-)
create mode 100644 sound/soc/sof/intel/ext_manifest.h
create mode 100644 sound/soc/sof/intel/icl.c
--
2.28.0
Hi,
this is a set of patches to address the errors appearing on the
machine that has no I2S DMIC on AMD machine but probed.
Takashi
===
Takashi Iwai (2):
ASoC: amd: Downgrade print level for invalid ACP mode
ASoC: amd: Return -ENODEV for non-existing ACPI call
sound/soc/amd/raven/pci-acp3x.c | 2 +-
sound/soc/amd/renoir/rn-pci-acp3x.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--
2.26.2
Add support for the Analog Devices ADAU1372 audio CODEC.
[Alexandre Belloni: allow 32kHz for TDM4 in slave mode]
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201127123030.1610574-2-alexandre.belloni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core.c don't need sound/jack.h anymore, but asoc.h needs it.
This patch fixup header magic.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2iju3zm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AMD Renoir driver tries to identify the presence of DMIC by evaluating
ACPI _WOV entry, and it returns -EINVAL when the ACPI call failed.
This ended up an error message like
snd_rn_pci_acp3x: probe of 0000:04:00.5 failed with error -22
although the system is correctly set up.
For avoiding such a superfluous error message, change the return value
to -ENODEV. Then the driver core just skips to the next one without
complaining.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201127143200.16272-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The acp3x raven driver skips the probing when the given device isn't
connected with I2S. This skip behavior itself is fine, but the driver
also emits an error message "Invalid ACP audio mode" with KERN_ERR.
This isn't nice since it appears on the boot screen even if a boot
splash is running, although this itself is no real error.
Downgrade the print level to KERN_INFO so that this message won't
appear on the console unnecessarily.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20201127143200.16272-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Yet another quirk for Pioneer DJ DDJ-SR2, which is quite similar like
other DJ DDJ models but with slightly different EPs or channels.
Reported-by: Geraldo <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/20201130083714.10640-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Spectre x360 Convertible 15" version (SSID 103c:827f) needs the
same quirk to make the mute LED working like other models.
System Information
Manufacturer: HP
Product Name: HP Spectre x360 Convertible 15-bl1XX
Sound Codec:
Codec: Realtek ALC295
Vendor Id: 0x10ec0295
Subsystem Id: 0x103c827f
Revision Id: 0x100002
Reported-by: <christoph.plattner@gmx.at>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201128090015.7743-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The check for the FW_FEATURE_PS3_LV1 firmware feature is already performed
in ps3_system_bus_init() before registering the driver. So if the probe
function is actually used, this feature is already known to be available.
The check for the match id is also superfluous; the condition is always
true because the bus' match function (ps3_system_bus_match()) only
considers this driver for devices having:
dev->match_id == snd_ps3_bus_driver_info.match_id.
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Leonard Goehrs <l.goehrs@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20201127152259.1470079-1-l.goehrs@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The remove callback is only called for devices that were probed
successfully before. As the matching probe function cannot complete
without error if dev->match_id != PS3_MATCH_ID_SOUND, we don't have to
check this here.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20201126165950.2554997-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch allows the Pioneer DJ DDJ-RR to be seen as a USB audio
device under Linux and therefore usable in such applications as
Mixxx.
Tested Master Audio out, headphones (both output jacks) and microphone
input. All work perfectly.
Signed-off-by: Daniel Martin <dmanlfc@gmail.com>
Link: https://lore.kernel.org/r/20201128084035.2958-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The setup of unsolicited event callbacks should be done only once at
the parser phase, not in the init phase that is called multiple times
at each resume.
This patch moves the unsol setup code in ca0132 codec driver to the
more appropriate place.
Reported-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200930113008.9307-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS Zephyrus G14 has two speaker pins, and the auto-parser tries to
assign an individual DAC to each pin as much as possible.
Unfortunately the third DAC has no volume control unlike the two DACs,
and this resulted in the inconsistent speaker volumes.
As a workaround, wire both speaker pins to the same DAC by modifying
the existing quirk (ALC289_FIXUP_ASUS_GA401) applied to this device.
Since this quirk entry is chained by another, we need to avoid
applying the DAC assignment change for it. Luckily, there is another
quirk entry (ALC289_FIXUP_ASUS_GA502) doing the very same thing, so we
can chain to the GA502 quirk instead.
Note that this patch uses a new flag of the generic parser,
obey_preferred_dacs, for enforcing the DACs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210359
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201127141104.11041-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The generic parser accepts the preferred_dacs[] pairs as a hint for
assigning a DAC to each pin, but this hint doesn't work always
effectively. Currently it's merely a secondary choice after the trial
with the path index failed. This made sometimes it difficult to
assign DACs without mimicking the connection list and/or the badness
table.
This patch adds a new flag, obey_preferred_dacs, that changes the
behavior of the parser. As its name stands, the parser obeys the
given preferred_dacs[] pairs by skipping the path index matching and
giving a high penalty if no DAC is assigned by the pairs. This mode
will help for assigning the fixed DACs forcibly from the codec
driver.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201127141104.11041-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With a stream with low bitrate, user can't pause or resume the stream
near the end of the stream because current ALSA doesn't allow it.
If the stream has very low bitrate enough to store whole stream into
the buffer, user can't do anything except stop the stream and then
restart it from the first because most of applications call draining
after sending last frame to the kernel.
If pause, resume are allowed during draining, user experience can be
enhanced.
To prevent malfunction in HW drivers which don't support pause
during draining, pause during draining will only work if HW driver
enable this feature explicitly by calling
snd_compr_use_pause_in_draining().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/000101d6c3f0$89b312b0$9d193810$@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Separate the dsp ops for ICL ops to specify the use of ICCMAX
FW boot sequence in the run op. All other ops are identical with TGL
except post_fw_run. The recommended HW programming sequence for ICL
is to power up core 3 and keep it in stall if HPRO is enabled.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-6-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Modify the signature of stall op to specify core_mask to stall cores.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
OUTBOX_SIZE, INBOX_SIZE are defined but not being used yet. Handle
these elements to avoid warning about unknown token type.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the parse_platform_ext_manifest() op for HDA platforms to parse
the SOF_EXT_MAN_CAVS_CONFIG_CAVS_LPRO config item to determine if the FW
is configured for LPRO. The default clock configuration is assumed to be
HPRO in the absence of this item in the extended manifest.
New member clk_config_lpro is added to struct sof_intel_hda_dev to store
the FW clock config information and that this will be used later to perform
platform-specific operations in the post_fw_run op.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add parse_platform_ext_manifest() op to parse platform-specific config
data in the extended manifest.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201127164022.2498406-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
the microphone is attached to external codec(adau7002)
instead of rt5682.We need to always use 32 bit format on sc7180
to meet the clock requirement of adau7002:
The ADAU7002 requires a BCLK rate
that is a minimum of 64× the LRCLK sample rate
Signed-off-by: xuyuqing <xuyuqing@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20201118005858.123013-2-xuyuqing@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A small set of driver specific fixes, plus a new platform quirk from
Hans.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/A98YACgkQJNaLcl1U
h9ClFggAgPr2/KIB3kRZCaKXaNgQ7oqgPdf0NNMYmwAnLaRK+t1EL0GdiyP5AxDA
sU9RWjoXyCmoe+dqmlS7Iavcj2Ne+y7w2isonrreI26LFrAkO8jL2mo656NArMjx
cxIhjF7sNWVbel2MYhrRSta8LkqrI8FiSV8elGW5DttGyceYHuoNXjo4AN3emnk3
V5kx9uT/kC1ef7SseLeN868VAMM5n42bZV+Eide/DJwYivlX7Hcwaqmax7FPjuYe
J/n3VrNh+AjABvpzPXBD+6e7X8aiYtQWAAtBz2FZLoL+4bREiG4qWP2kW4nwnisS
Bl0W0rE2LvctIKqkAey4/JUwwWCkXg==
=39QE
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.10-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.10
A small set of driver specific fixes, plus a new platform quirk from
Hans.
snd_soc_suspend() and soc_resume_deferred() are calling
same snd_soc_dapm_stream_event() with same logic with different parameter.
This patch adds new soc_dapm_suspend_resume() and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87im9rekfp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_suspend() and soc_resume_deferred() are calling
same snd_soc_dai_digital_mute() with same logic with different parameter.
This patch adds new soc_playback_digital_mute() and share the code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0u7ekfv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
This kind of duplicated code can be a hotbed of bugs,
thus, this patch-set share soc_compr_free() and rollback.
Kuninori Morimoto (5):
ASoC: soc-compress: move soc_compr_free() next to soc_compr_open()
ASoC: soc-dai: add mark for snd_soc_dai_compr_startup/shutdown()
ASoC: soc-component: add mark for snd_soc_component_compr_open/free()
ASoC: soc-component: add mark for snd_soc_link_compr_startup/shutdown()
ASoC: soc-compress: add soc_compr_clean() and call it from soc_compr_open/free()
include/sound/soc-component.h | 6 +-
include/sound/soc-dai.h | 4 +-
include/sound/soc-link.h | 3 +-
include/sound/soc.h | 1 +
sound/soc/soc-component.c | 17 +++--
sound/soc/soc-compress.c | 115 +++++++++++++++++-----------------
sound/soc/soc-dai.c | 13 +++-
sound/soc/soc-link.c | 11 +++-
8 files changed, 95 insertions(+), 75 deletions(-)
--
2.25.1
Hi,
Changes since v1:
1. New patch 2/39: ASoC: bd28623: mark OF related data as maybe unused,
2. Patches 1-13: add maybe_unused after discussions with Mark,
3. Add Sylwester's review to two patches (one changed so please review
one more time).
Best regards,
Krzysztof
Krzysztof Kozlowski (39):
ASoC: ak5558: mark OF related data as maybe unused
ASoC: bd28623: mark OF related data as maybe unused
ASoC: gtm601: mark OF related data as maybe unused
ASoC: inno_rk3036: mark OF related data as maybe unused
ASoC: rk3328: mark OF related data as maybe unused
ASoC: tas571x: mark OF related data as maybe unused
ASoC: kirkwood: armada-370-db: mark OF related data as maybe unused
ASoC: meson: t9015: mark OF related data as maybe unused
ASoC: qcom: mark OF related data as maybe unused
ASoC: samsung: smdk_wm8994: mark OF related data as maybe unused
ASoC: rockchip: mark OF related data as maybe unused
ASoC: ti: davinci: mark OF related data as maybe unused
ASoC: uniphier: mark OF related data as maybe unused
ASoC: ak4118: skip of_device_id table when !CONFIG_OF
ASoC: alc5623: skip of_device_id table when !CONFIG_OF
ASoC: alc5632: skip of_device_id table when !CONFIG_OF
ASoC: da7218: skip of_device_id table when !CONFIG_OF
ASoC: da7219: skip of_device_id table when !CONFIG_OF
ASoC: da9055: skip of_device_id table when !CONFIG_OF
ASoC: es8316: skip of_device_id table when !CONFIG_OF
ASoC: max98090: skip of_device_id table when !CONFIG_OF
ASoC: max98095: skip of_device_id table when !CONFIG_OF
ASoC: max98371: skip of_device_id table when !CONFIG_OF
ASoC: max9867: skip of_device_id table when !CONFIG_OF
ASoC: max98925: skip of_device_id table when !CONFIG_OF
ASoC: max98926: skip of_device_id table when !CONFIG_OF
ASoC: pcm1789: skip of_device_id table when !CONFIG_OF
ASoC: pcm179x: skip of_device_id table when !CONFIG_OF
ASoC: rt5660: skip of_device_id table when !CONFIG_OF
ASoC: tas2562: skip of_device_id table when !CONFIG_OF
ASoC: tlv320: skip of_device_id table when !CONFIG_OF
ASoC: ts3a227e: skip of_device_id table when !CONFIG_OF
ASoC: es7134: mark OF related data as maybe unused
ASoC: es7241: mark OF related data as maybe unused
ASoC: samsung: i2s: mark OF related data as maybe unused
ASoC: max98371: drop driver pm=NULL assignment
ASoC: max98925: drop driver pm=NULL assignment
ASoC: max98926: drop driver pm=NULL assignment
ASoC: samsung: smdk_wm8994: remove redundant of_match_ptr()
sound/soc/codecs/ak4118.c | 2 ++
sound/soc/codecs/ak5558.c | 2 +-
sound/soc/codecs/alc5623.c | 2 ++
sound/soc/codecs/alc5632.c | 2 ++
sound/soc/codecs/bd28623.c | 2 +-
sound/soc/codecs/da7218.c | 2 ++
sound/soc/codecs/da7219.c | 2 ++
sound/soc/codecs/da9055.c | 2 ++
sound/soc/codecs/es7134.c | 4 ++--
sound/soc/codecs/es7241.c | 2 +-
sound/soc/codecs/es8316.c | 2 ++
sound/soc/codecs/gtm601.c | 2 +-
sound/soc/codecs/inno_rk3036.c | 2 +-
sound/soc/codecs/max98090.c | 2 ++
sound/soc/codecs/max98095.c | 2 ++
sound/soc/codecs/max98371.c | 3 ++-
sound/soc/codecs/max9867.c | 2 ++
sound/soc/codecs/max98925.c | 3 ++-
sound/soc/codecs/max98926.c | 3 ++-
sound/soc/codecs/pcm1789-i2c.c | 2 ++
sound/soc/codecs/pcm179x-i2c.c | 2 ++
sound/soc/codecs/rk3328_codec.c | 2 +-
sound/soc/codecs/rt5660.c | 2 ++
sound/soc/codecs/tas2562.c | 2 ++
sound/soc/codecs/tas571x.c | 4 ++--
sound/soc/codecs/tlv320adcx140.c | 2 ++
sound/soc/codecs/tlv320aic23-i2c.c | 2 ++
sound/soc/codecs/ts3a227e.c | 2 ++
sound/soc/kirkwood/armada-370-db.c | 2 +-
sound/soc/meson/t9015.c | 2 +-
sound/soc/qcom/apq8016_sbc.c | 2 +-
sound/soc/qcom/lpass-apq8016.c | 2 +-
sound/soc/qcom/lpass-ipq806x.c | 2 +-
sound/soc/qcom/lpass-sc7180.c | 2 +-
sound/soc/rockchip/rockchip_i2s.c | 2 +-
sound/soc/rockchip/rockchip_pdm.c | 2 +-
sound/soc/rockchip/rockchip_spdif.c | 2 +-
sound/soc/samsung/i2s.c | 8 ++++----
sound/soc/samsung/smdk_wm8994.c | 4 ++--
sound/soc/ti/davinci-i2s.c | 2 +-
sound/soc/uniphier/aio-ld11.c | 2 +-
sound/soc/uniphier/aio-pxs2.c | 2 +-
sound/soc/uniphier/evea.c | 2 +-
43 files changed, 69 insertions(+), 32 deletions(-)
--
2.25.1
First version of rt715 sdw sdca codec driver.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20201103172226.4278-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
Now, soc_compr_open/free() are handling
1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
Now, 1) to 3) are handled.
This patch adds new soc_compr_clean() and call it from
soc_compr_open() as rollback, and from soc_compr_free_free() as
normal close handler.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ima25iwa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
=> 3) snd_soc_link_compr_startup/shutdown()
This patch is for 3) snd_soc_link_compr_startup/shutdown()
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0ui5iwf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
1) snd_soc_dai_compr_startup/shutdown()
=> 2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 2) snd_soc_component_compr_open/free(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfey5iwk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_compr_open() does rollback when failed (A),
but, it is almost same as soc_compr_free().
static int soc_compr_open(xxx)
{
...
if (ret < 0)
goto xxx_err;
...
return 0;
^ machine_err:
| ...
| out:
(A) ...
| pm_err:
| ...
v return ret;
}
The difference is
soc_compr_free() is for all dai/component/substream,
rollback is for succeeded part only.
This kind of duplicated code can be a hotbed of bugs,
thus, we want to share soc_compr_free() and rollback.
=> 1) snd_soc_dai_compr_startup/shutdown()
2) snd_soc_component_compr_open/free()
3) snd_soc_link_compr_startup/shutdown()
This patch is for 1) snd_soc_dai_compr_startup/shutdown(),
and adds new cstream mark.
It will mark cstream when startup() was suceeded.
If rollback happen *after* that, it will check rollback flag
and marked cstream.
It cares *previous* startup() only now,
but we might want to check *whole* marked cstream in the future.
This patch is using macro so that it can be easily adjust to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtze5iwp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch moves soc_compr_free() next to soc_compr_open().
This is prepare for soc_compr_open() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8ju5iwv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDMI interface can also be used as receiver, this patch is to
add such support. The most difference compare with TX is that RX
don't need to get edid information.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1606372608-2329-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_match_device() already handles properly !CONFIG_OF case, so passing
the argument via of_match_ptr() is not needed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-40-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/samsung/i2s.c:1646:42: warning: ‘i2sv5_dai_type_i2s1’ defined but not used [-Wunused-const-variable=]
sound/soc/samsung/i2s.c:1639:42: warning: ‘i2sv7_dai_type’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-36-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/es7241.c:206:33: warning: ‘es7241_chip’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-35-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/es7134.c:264:33: warning: ‘es7154_chip’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-34-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/ts3a227e.c:369:34: warning: ‘ts3a227e_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-33-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/tlv320aic23-i2c.c:38:34: warning: ‘tlv320aic23_of_match’ defined but not used [-Wunused-const-variable=]
sound/soc/codecs/tlv320adcx140.c:1076:34: warning: ‘tlv320adcx140_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-32-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/tas2562.c:805:34: warning: ‘tas2562_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-31-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/rt5660.c:1238:34: warning: ‘rt5660_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-30-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/pcm179x-i2c.c:33:34: warning: ‘pcm179x_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-29-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/pcm1789-i2c.c:36:34: warning: ‘pcm1789_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-28-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/max98926.c:574:34: warning: ‘max98926_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-27-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/max98925.c:630:34: warning: ‘max98925_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-26-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/max9867.c:652:34: warning: ‘max9867_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-25-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/max98371.c:411:34: warning: ‘max98371_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-24-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/max98095.c:2151:34: warning: ‘max98095_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-23-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/max98090.c:2671:34: warning: ‘max98090_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-22-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/es8316.c:837:34: warning: ‘es8316_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-21-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/da9055.c:1522:34: warning: ‘da9055_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-20-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/da7219.c:1705:34: warning: ‘da7219_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-19-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/da7218.c:2281:34: warning: ‘da7218_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-18-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/alc5632.c:1170:34: warning: ‘alc5632_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-17-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/alc5623.c:1071:34: warning: ‘alc5623_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-16-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can match by multiple methods. Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:
sound/soc/codecs/ak4118.c:407:34: warning: ‘ak4118_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-15-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/uniphier/aio-ld11.c:375:34: warning: ‘uniphier_aio_of_match’ defined but not used [-Wunused-const-variable=]
sound/soc/uniphier/evea.c:554:34: warning: ‘evea_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-14-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/ti/davinci-i2s.c:750:34: warning: ‘davinci_i2s_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-13-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/rockchip/rockchip_i2s.c:569:34: warning: ‘rockchip_i2s_match’ defined but not used [-Wunused-const-variable=]
sound/soc/rockchip/rockchip_pdm.c:463:34: warning: ‘rockchip_pdm_match’ defined but not used [-Wunused-const-variable=]
sound/soc/rockchip/rockchip_spdif.c:44:34: warning: ‘rk_spdif_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-12-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/samsung/smdk_wm8994.c:139:34: warning: ‘samsung_wm8994_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-11-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/qcom/lpass-apq8016.c:294:34: warning: ‘apq8016_lpass_cpu_device_id’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-10-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/meson/t9015.c:315:34: warning: ‘t9015_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-9-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/kirkwood/armada-370-db.c:137:34: warning: ‘a370db_dt_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-8-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/tas571x.c:892:34: warning: ‘tas571x_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-7-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/rk3328_codec.c:502:34: warning: ‘rk3328_codec_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-6-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/inno_rk3036.c:470:34: warning: ‘rk3036_codec_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-5-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/gtm601.c:90:34: warning: ‘gtm601_codec_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-4-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/bd28623.c:225:34: warning: ‘bd28623_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-3-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
sound/soc/codecs/ak5558.c:418:34: warning: ‘ak5558_i2c_dt_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201125164452.89239-2-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
To fix errors in some 4 poles headset detection cases,
this patch adjusts the voltage threshold for mic detection.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20201126092759.9427-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since we have resource_intersection() helper, let's utilize it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix to return a negative error code from the error handling case
instead of 0 in function wm_adsp_load(), as done elsewhere in this
function.
Fixes: 170b1e123f ("ASoC: wm_adsp: Add support for new Halo core DSPs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201123133839.4073787-1-luomeng12@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This file content describes memory allocation status
at run-time, typically to detect memory leaks.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-5-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Values given in this dictionary describes used firmware configuration,
like feature availability, buffer size limits and similar properties.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201124180017.2232128-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some laptops like ASUS UX482EG & B9400CEA's headset audio does not work
until the quirk ALC294_FIXUP_ASUS_HPE is applied.
Signed-off-by: Jian-Hong Pan <jhp@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201124092024.179540-1-jhp@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since 5.10-rc1 i.MX is a devicetree-only platform and the existing
.id_table support in this driver was only useful for old non-devicetree
platforms.
Get rid of the .id_table since it is no longer used.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201123200917.16447-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TI/OMAP sound drivers use Common Clock Framework thus they cannot be
built on platforms without it (e.g. compile test on MIPS with RALINK and
SOC_RT305X):
/usr/bin/mips-linux-gnu-ld: sound/soc/ti/davinci-mcasp.o:davinci-mcasp.c:(.text+0x1c64): more undefined references to `clk_set_parent' follow
/usr/bin/mips-linux-gnu-ld: sound/soc/ti/omap-dmic.o: in function `omap_dmic_set_dai_sysclk':
omap-dmic.c:(.text+0xa5c): undefined reference to `clk_get_parent'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201116175133.402553-4-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The STM32 I2S drivers use Common Clock Framework thus they cannot be
built on platforms without it (e.g. compile test on MIPS with RALINK and
SOC_RT305X):
/usr/bin/mips-linux-gnu-ld: sound/soc/stm/stm32_i2s.o: in function `stm32_i2s_hw_params':
stm32_i2s.c:(.text+0x1870): undefined reference to `clk_set_parent'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201116175133.402553-3-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SH4 FSI sound drivers use SuperH clocks thus they cannot be built on
platforms without proper clock support (e.g. compile test on MIPS with
RALINK and SOC_RT305X):
/usr/bin/mips-linux-gnu-ld: sound/soc/sh/fsi.o: in function `fsi_clk_set_rate_external':
fsi.c:(.text+0x2714): undefined reference to `clk_set_parent'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201116175133.402553-2-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In plugged callback, ELD should be updated from display driver so that
user space can query information from ELD immediately after receiving jack
plugged event.
When jack is unplugged, clear ELD buffer so that user space does not get
obsolete information of unplugged HDMI.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20201118043852.1338877-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix enabling BCLK and LRCLK only when LPAIF is invalid state and
bit clock in enable state.
In device suspend/resume scenario LPAIF is going to reset state.
which is causing LRCLK disable and BCLK enable.
Avoid such inconsitency by removing unnecessary cpu dai prepare API,
which is doing LRCLK enable, and by maintaining BLCK state information.
Fixes: 7e6799d8f8 ("ASoC: qcom: lpass-cpu: Enable MI2S BCLK and LRCLK together")
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1606148273-17325-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the usb audio driver correctly finds implicit feedback endpoints,
the implicit feedback quirk for the MOTU M-Series is no longer required.
This also removes some unnecessary vendor specific messages from the MOTU
M-Series boot quirk. The removed vendor specific messages turned on vendor
specific interrupts to the host every 32 samples. The only thing the boot
quirk needs to do is wait for 2 seconds.
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-42-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few other BOSS devices (BR-80, GT-100v2, Katana) seem requiring the
same quirk as BOSS GT-001, i.e. no implicit feedback for playback but
tying with capture. Add and correct the corresponding quirk table
entries for them.
Reported-and-tested-by: Keith Milner <kamilner@superlative.org>
Link: https://lore.kernel.org/r/20201123085347.19667-41-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A new module option, implicit_fb, is added to specify the driver
looking for the implicit feedback sync. This can be useful for a
device that could be working better in the implicit feed back mode and
user wants to test it quickly. When this works, we can add the quirk
entry easily.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-40-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch extends the implicit feedback mode parser code to check the
description more generically, so that the quirk entries can be added
without the explicit EP and interface numbers. The search is done for
the next and the previous interface of the given altset, and if both
entries are ASYNC mode and the direction matches, it just takes as the
sync endpoint. The generic parser is applicable only for the playback
stream.
As of now, only a few M-Audio devices have been converted to use this
mode.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-39-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The code dealing with the implicit feedback mode grew recently, and
it's becoming messy. As we receive more and more devices that need
the similar handling, it's better to be processed through a table
instead of the open code.
This patch moves the code that is relevant with parsing the implicit
feedback mode and some helpers into another file, implicit.c. The
detection and the setup of the implicit feedback sync EPs are
rewritten to use the ID/class matching table instead.
There should be no functional changes.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-38-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The capture stream of BOSS GT-001 seems always requiring to be tied
with the playback stream. OTOH, the playback stream of this device
doesn't seem working in the implicit fb mode, per se, since the
playback must be running before the capture stream.
This patch tries to address the points above:
- Avoid the implicit fb mode for the playback
- Set up a fake sync EP for the capture stream with the hard-coded
playback stream using the implicit fb mode
Reported-by: Keith Milner <kamilner@superlative.org>
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-37-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now the sync endpoints have been parsed at the beginning and won't be
changed dynamically, let's show them in the proc outputs for helping
debugging.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-36-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just for consistency, use unsigned char for iface and altsetting in
allover places. Also rearrange the field positions of
snd_usb_endpiont and tidy up with some comments.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-35-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Follow the inclusive terminology, just replace sync_master/sync_slave
with sync_source/sync_sink. It's also a bit clearer from its meaning,
too.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-34-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are multiple places in format.c performing the similar code for
setting the rate_min, rate_max and rates fields. This patch unifies
those in a helper function and calls it at the end of the parser phase
so that all rate_table entries have been already determined.
No functional changes, just a minor code refactoring.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-33-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are two places calculating the next packet size for the playback
stream in the exactly same way. Provide the single helper for this
purpose and use it from both places gracefully.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-32-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some fields like interface and alt_idx in snd_usb_substream are mostly
useless now as they can be referred via either cur_audiofmt or
data_endpoint assigned to the substream. Drop those, and also assure
the concurrency about the access of cur_audiofmt field.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-31-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Minor code refactoring to consolidate the URB deactivation code in
endpoint.c. A slight behavior change is that the error handling in
snd_usb_endpoint_start() leaves EP_FLAG_STOPPING now. This should be
synced with the later PCM sync_stop callback.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-30-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The endpoint objects may be started/stopped concurrently by different
substreams in the case of implicit feedback mode, while the current
code handles the reference counter without any protection.
This patch changes the refcount to atomic_t for avoiding the
inconsistency. We need no reference_t here as the refcount goes only
up to 2.
Also the name "use_count" is renamed to "running" since this is about
actually the running status, not the open refcount.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-29-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The audioformat is referred in many places but most of usages are
read-only. Let's add const prefix in the possible places.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-28-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The implicit feedback mode uses a ring buffer for storing the received
packet sizes from the feedback source, and the code has a slight flaw;
when a playback stream stalls by some reason and the URBs aren't
processed, the next_packet FIFO might become empty, but the driver
can't distinguish whether it's empty or full because it's managed with
read_poss and write_pos.
This patch addresses those by changing the next_packet array
management. Instead of keeping read and write positions, now the head
position and the queued amount are kept. It's easier to understand
about the emptiness. Also, the URB active flag is now cleared before
calling queue_pending_output_urbs() for avoiding (theoretically)
possible inconsistency.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-27-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is an intensive surgery for the endpoint and stream management
for achieving more robust and clean code.
The goals of this patch are:
- More clear endpoint resource changes
- The interface altsetting control in a single place
Below are brief description of the whole changes.
First off, most of the endpoint operations are moved into endpoint.c,
so that the snd_usb_endpoint object is only referred in other places.
The endpoint object is acquired and released via the new functions
snd_usb_endpoint_open() and snd_usb_endpoint_close() that are called
at PCM hw_params and hw_free callbacks, respectively. Those are
ref-counted and EPs can manage the multiple opens.
The open callback receives the audioformat and hw_params arguments,
and those are used for initializing the EP parameters; especially the
endpoint, interface and altset numbers are read from there, as well as
the PCM parameters like the format, rate and channels. Those are
stored in snd_usb_endpoint object. If it's the secondary open, the
function checks whether the given parameters are compatible with the
already opened EP setup, too.
The coupling with a sync EP (including an implicit feedback sync) is
done by the sole snd_usb_endpoint_set_sync() call.
The configuration of each endpoint is done in a single shot via
snd_usb_endpoint_configure() call. This is the place where most of
PCM configurations are done. A few flags and special handling in the
snd_usb_substream are dropped along with this change.
A significant difference wrt the configuration from the previous code
is the order of USB host interface setups. Now the interface is
always disabled at beginning and (re-)enabled at the last step of
snd_usb_endpoint_configure(), in order to be compliant with the
standard UAC2/3. For UAC1, the interface is set before the parameter
setups since there seem devices that require it (e.g. Yamaha THR10),
just like how it was done in the previous driver code.
The start/stop are almost same as before, also single-shots. The URB
callbacks need to be set via snd_usb_endpoint_set_callback() like the
previous code at the trigger phase, too.
Finally, the flag for the re-setup is set at the device suspend
through the full EP list, instead of PCM trigger. This catches the
overlooked cases where the PCM hasn't been running yet but the device
needs the full setup after resume.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-26-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function to evaluate the match of the parameters with an EP
assumes only the discrete rate tables and doesn't handle the
continuous rates properly.
This patch fixes match_endpoint_audioformats() to handle the
continuous rates. Also the almost useless debug prints there are
dropped.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 92adc96f8e ("ALSA: usb-audio: set the interface format
after resume on Dell WD19") introduced the workaround for the broken
setup after the resume specifically on a Dell dock model. However,
the full setup should have been performed after the resume on all
devices, as we can't guarantee the same state. So this patch removes
the conditional check and applies the workaround always.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The prepare_data_urb and retire_data_urb fields of the endpoint object
are set dynamically at PCM trigger start/stop. Those are evaluated in
the endpoint handler, but there can be a race, especially if two
different PCM substreams are handling the same endpoint for the
implicit feedback case. Also, the data_subs field of the endpoint is
set and accessed dynamically, too, which has the same risk.
As a slight improvement for the concurrency, this patch introduces the
function to set the callbacks and the data in a shot with the memory
barrier. In the reader side, it's also fetched with the memory
barrier.
There is still a room of race if prepare and retire callbacks are set
during executing the URB completion. But such an inconsistency may
happen only for the implicit fb source, i.e. it's only about the
capture stream. And luckily, the capture stream never sets the
prepare callback, hence the problem doesn't happen practically.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
start_endpoints() may leave the data endpoint running if an error
happens at starting the sync endpoint. We should stop both streams
properly, instead.
While we're at it, move the debug prints into the endpoint.c that is a
more suitable place.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A preliminary change for the later big changes. This is a minor code
refactoring to drop the unnecessary arguments that can be retrieved in
a different way.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-21-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A preliminary change for the later big changes. This is a minor code
refactoring to drop the unnecessary arguments that can be retrieved in
a different way.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A preliminary patch for the later big change. Just a minor code
refactoring.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting the active altsetting at changing sample rate seems
unrecommended. The host should deselect the altsetting at first
before that, then select it again.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a helper function to retrieve the usb_host_interface object from
the given interface and altsetting number pair, which is a commonly
used procedure in the driver code.
No functional changes, just minor code refactoring.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-17-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This behavior turned out to be invalid from the USB spec POV and
shouldn't be applied. As it's an optional flag that is set only via
an card control element that must be hardly used, let's drop it
again.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-16-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently snd_usb_endpoint objects are created at first when the
substream is opened and tries to assign the endpoints corresponding to
the matching audioformat. But since basically the all endpoints have
been already parsed and the information have been obtained, we may
create the endpoint objects statically at the init phase. It's easier
to manage for the implicit fb case, for example.
This patch changes the endpoint object management and lets the parser
to create the all endpoint objects.
This change shouldn't bring any functional changes.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The implicit feedback mode initializes both the main data stream and
the sync data stream. When a sync stream was already opened, this
would result in the doubly initialization and might screw up things.
Add the check of already opened sync streams and skip the unnecessary
initialization.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The file debug.h contains a simple macro for debug prints, and it's
used only in two places, the format parser and the hw_params rules.
The former actually should print a more informative message instead,
so the only users are the hw_parmas rules.
This patch moves the contents of debug.h into the hw_params rules
local code and remove the unneeded includes. Also, the debug print in
the format parser is replaced with the information print with more
useful information, and the raw printk() call is replaced with
pr_debug().
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Several hw_params functions narrows the interval via min/max rule in
the very similar way, so factor out those into a helper function and
use commonly.
No functional changes, just minor code refactoring.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the current code, there is no check at the stream open time whether
the endpoint is being already used by others. In the normal
operations, this shouldn't happen, but in the case of the implicit
feedback mode, it's a common problem with the full duplex operation,
because the capture stream is always opened by the playback stream as
an implicit sync source.
Although we recently introduced the check of such a conflict of
parameters at the PCM hw_params time, it doesn't give any hint at the
hw_params itself and just gives the error. This isn't quite
comfortable, and it caused problems on many applications.
This patch attempts to make the parameter handling easier by
introducing the strict hw constraint matching with the counterpart
stream that is being used. That said, when an implicit feedback
playback stream is running before a capture stream is opened, the
capture stream carries the PCM hw-constraint to allow only the same
sample rate, format, periods and period frames as the running playback
stream. If not opened or there is no conflict of endpoints, the
behavior remains as same as before.
Note that this kind of "weak link" should work for most cases, but
this is no concrete solution; e.g. if an application changes the hw
params multiple times while another stream is opened, this would lead
to inconsistencies.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a preliminary work for the upcoming hw-constraint change for
the implicit feedback mode.
Currently snd_usb_autoresume() is called at the end of
setup_hwinfo(). It's a bit confusing; because of this implicit
refcount usage, the caller side needs to call snd_usb_autosuspend()
later in the error path although it's not seen inside the function.
Instead, it's clearer to call both snd_usb_autoresume() and suspend()
in the very same function.
It's only refactoring and no functional changes.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of parsing and evaluating the sync endpoint and the implicit
feedback mode at each time the audio stream is opened, let's parse it
once at the probe time, as the all needed information can be obtained
statically from the descriptor or from the quirk.
This patch extends audioformat struct to record the sync endpoint,
interface and altsetting as well as the implicit feedback flag, which
are filled at parsing the streams. Then, set_sync_endpoint() is much
simplified just to follow the already parsed data.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few rooms for improvements wrt the debug prints:
- The EP debug print is shown only at starting, not at stopping
- The EP debug print contains useless object addresses
- Some helpers show the urb and the EP object addresses, too
This patch addresses those shortcomings.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The sync EP setup isn't cleared at stopping the stream but expected to
be cleared at the next stream start. This may leave the sync link
setup stale and can spoof wrongly when full duplex streams were
running in the implicit fb sync. Let's initialize them properly at
start and end of the stream.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Factor out the code to obtain snd_usb_endpoint object matching with
the given endpoint. It'll be used in the later patch to add the
implicit feedback hw-constraint.
No functional change by this patch itself.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that many UAC2 devices are with the implicit feedback, but
they couldn't be probed properly because the assumption the driver
takes currently isn't applied: they have the single endpoint for both
data and implicit-fb streams, while we checked only the classical sync
endpoints assigned to the next altsetting in the same interface.
This patch extends the search to match with those typical cases where
the implicit fb stream is found in the next interface number.
While we're at it, slightly refactor the code, not returning 0/-ERROR
but use the standard bool to success/failur, which is more intuitive
in this particular case.
Reported-by: Dylan Robinson <dylan_robinson@motu.com>
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current driver code assumes blindly that all found sample rates for
the same endpoint from the UAC2 and UAC3 descriptors can be used no
matter which altsetting, but actually this was wrong: some devices
accept only limited sample rates in each altsetting. For determining
which altsetting supports which rate, we need to verify each sample rate
and check the validity via UAC2_AS_VAL_ALT_SETTINGS. This control
reports back the available altsettings as a bitmap.
This patch implements the missing piece above, the verification and
reconstructs the sample rate tables based on the result.
An open question is how to deal with the altsettings that ended up
with no valid sample rates after verification. At least, there is a
device that showed this problem although the sample rates did work in
the later usage (see bug link). For now, we accept such an altset as
is, assuming that it's a firmware bug.
Reported-by: Dylan Robinson <dylan_robinson@motu.com>
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178203
Link: https://lore.kernel.org/r/20201123085347.19667-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCM trigger callback is atomic, hence we must not call a function
like usb_set_interface() there. Calling it from there would lead to a
kernel Oops.
Fix it by moving the usb_set_interface() call to set_sync_endpoint().
Also, apply the snd_usb_set_interface_quirk() for consistency, too.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the current code, when the device provides the discrete sample rate
tables with unusual sample rates, the driver tries to gather the whole
values from the audioformat entries and create a hw-constraint rule to
restrict with this single rate list. This is rather inefficient and
may overlook the rates that are associated only with the certain
audioformat entries.
This patch improves the hw constraint setup by rewriting the existing
hw_rule_rate(). The discrete sample rates (identified by rate_table
and nr_rates of format entry) are checked in the existing
hw_rule_rate() instead of extra rules; in the case of discrete rates,
the function compares with each rate table entry and calculates the
min/max values from there. For the contiguous rates, the behavior
doesn't change.
Along with it, snd_usb_pcm_check_knot() and snb_usb_substream
rate_list field become superfluous, thus those are dropped.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201121083747.1330299-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The only usage of the ops field in the loopback_cable struct is to call
its members, the field it self is never changed. Make it a pointer to
const. This allows us to constify two static loopback_ops structs to
allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20201120231046.76758-1-rikard.falkeborn@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ignore_machine field in the component driver is used to
ignore the FE DAI links defined in the machine driver,
override BE fixups and set the stream names for the
DAI links defined in the machine driver. This is required
to make SOF compatible with the legacy machine drivers.
In the case of the nocodec machine driver in SOF, there is
no need to rely upon this ignore_machine logic in the core.
Modify the machine driver to set DAI link stream names and the
BE hw_params_fixup callback appropriately.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201120141653.2160134-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series fixed "LDO_VAUD18-supply" regulator register fail.
We can see the error log "mt6359-sound supply LDO_VAUD18 not found, using
dummy regulator" when register the DAPM widget "LDO_VAUD18"
Otherwise, the power can not be turned on correctly when recording.
Jiaxin Yu (2):
ASoC: mediatek: mt6359: Fix regulator_dev_lookup() fails for id
"LDO_VAUD18"
dt-bindings: mediatek: mt6359: remove unused property for mt6359
Documentation/devicetree/bindings/sound/mt6359.yaml | 9 ---------
sound/soc/codecs/mt6359.c | 7 ++++---
2 files changed, 4 insertions(+), 12 deletions(-)
--
2.18.0
The module snd-intel-dspcfg, suggested by Jaroslav last year,
currently provide the means to select a PCI driver at run-time, based
on quirks, recommendations or user selection via a kernel
parameter. This capability removed a lot of confusions in
distributions and removed the need for recompilations to select legacy
HDaudio, SST or SOF drivers.
This patchset extends the concept to ACPI devices. This was driven by
the desire to at some point deprecate the Atom/SST driver for Baytrail
and Cherrytrail, which is no longer maintained by Intel. By having the
SOF driver enabled by distributions for Baytrail/Cherrytrail, we can
enable more end-user tests and make the transition easier for
distributions (likely in 2021 at this point).
This patchset provides the same solution for Broadwell, mainly to have
a single build for all Intel platforms. SOF on Broadwell remains an
option not recommended for distributions, as long as the 'catpt'
driver is maintained there is no burning desire to make SOF the
default on the three Broadwell-based platforms with the DSP
enabled.
Pierre-Louis Bossart (14):
ASoC: Intel: broadwell: add missing pm_ops
ASoC: Intel: bdw-rt5677: add missing pm_ops
ALSA: hda: intel-dsp-config: add helper for ACPI DSP driver selection
ASoC: soc-acpi: add helper to identify parent driver.
ASoC: Intel: boards: byt/cht: set card and driver name at run time
ASoC: Intel: byt/cht: set pm ops dynamically
ASoC: SOF: acpi: add dynamic selection of DSP driver
ASoC: Intel: Atom: add dynamic selection of DSP driver
ASoC: SOF: Intel: allow for coexistence between SOF and Atom/SST
drivers
ALSA: hda: intel-dsp-config: add Broadwell ACPI DSP driver selection
ASoC: Intel: broadwell: set card and driver name dynamically
ASoC: Intel: catpt: add dynamic selection of DSP driver
ASoC: SOF: Intel: allow for coexistence between SOF and catpt drivers
ALSA: hda: intel-dsp-config: ignore dsp_driver parameter for PCI
legacy devices
include/sound/intel-dsp-config.h | 7 ++
include/sound/soc-acpi.h | 6 +
sound/hda/intel-dsp-config.c | 111 +++++++++++++++++++
sound/soc/intel/Kconfig | 2 +
sound/soc/intel/atom/sst/sst_acpi.c | 8 ++
sound/soc/intel/boards/bdw-rt5650.c | 17 ++-
sound/soc/intel/boards/bdw-rt5677.c | 18 ++-
sound/soc/intel/boards/broadwell.c | 20 ++--
sound/soc/intel/boards/bytcht_cx2072x.c | 27 +++--
sound/soc/intel/boards/bytcht_da7213.c | 27 +++--
sound/soc/intel/boards/bytcht_es8316.c | 29 +++--
sound/soc/intel/boards/bytcr_rt5640.c | 30 +++--
sound/soc/intel/boards/bytcr_rt5651.c | 27 +++--
sound/soc/intel/boards/cht_bsw_max98090_ti.c | 29 +++--
sound/soc/intel/boards/cht_bsw_nau8824.c | 29 +++--
sound/soc/intel/boards/cht_bsw_rt5645.c | 38 ++++---
sound/soc/intel/boards/cht_bsw_rt5672.c | 29 +++--
sound/soc/intel/catpt/device.c | 12 ++
sound/soc/sof/intel/Kconfig | 33 +++---
sound/soc/sof/sof-acpi-dev.c | 14 ++-
20 files changed, 392 insertions(+), 121 deletions(-)
--
2.25.1
Current code does not setup CPU dai (causing -EIO errors on playback)
and does not pass SND_SOC_DAIFMT_I2S to codec fmt (causing i2s-hifi
errors). Fix both errors to enable HDMI audio playback on SM8250. Tested
on RB5 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: aa2e278554 ("ASoC: qcom: sm8250: add sound card qrb5165-rb5 support")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201119123145.709891-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This platform only had one audio jack.
If it plugged speaker then replug with speaker or headset, the sound
tone will change to abnormal.
Headset Mic also can't record when this issue was happen.
[ Added a short comment about the COEF by tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/593c777dcfef4546aa050e105b8e53b5@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If hw params enables dual phase transmission, then the word length for
the second phase should be set to match the sample format instead of
remaining at the reset default. This matches the configuration already
being done for the first phase.
This driver already sets the phase two sample size, so this should complete
the phase two configuration.
Signed-off-by: Kyle Russell <bkylerussell@gmail.com>
Link: https://lore.kernel.org/r/20201119034106.1273906-1-bkylerussell@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC dapm controls currently don't support more than 2 channels. This is
a problem for SOF-based devices where individual volume control cannot
be provided on the 4 DMIC input path.
If we want to provide controls for more than 2 channels, this patch
suggests a simple solution based on an override of the info callback.
For example, in the case with 4 channel DMIC PGAs, a sof_info callback
would be used. Mono and stereo cases will keep using the existing dapm
info callback.
A longer-term solution would be to remove the limits to 2 channels in
ASoC/DAPM/topology. This is a topic Intel is currently looking into,
e.g. by removing the use of 'reg' and 'rreg' fields and use arrays
instead. Such changes will be rather intrusive and touch multiple codec
and platform drivers. Removing restrictions is the right thing to do,
but this will need to be done in steps with lots of validation.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20201111173105.1927466-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mt6359 platform device is instantiated by mfd_add_devices(). In the
case, dev->of_node is NULL so that always fails to get the regulator_dev.
Use regualator-name "vaud18" that in dts node instead of
"LDO_VAUD19-supply". So that we can get regulator_dev through
regulator_lookup_by_name() directly.
Fixes: 64a70744b7 ("ASoC: Fix vaud18 power leakage of mt6359")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/1605841573-1442-2-git-send-email-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A collection of driver specific fixes, mostly for x86 systems (or CODECs
used mostly on x86) and all for relatively minor issues, the biggest one
being fixing S24_LE format on Keem Bay systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+2peUACgkQJNaLcl1U
h9COxAf/aq+7DrGjU1umHPD/zfS3ppjmN1hNCHBxqiCm1U9SBbBLGlnDMMcPqFQR
wS8SKdDfhKONA7q7fhGDvvFZd07r9HzIFra+9HVjuc5ouKlPkoETF8uDfXqAdOkM
sXkffe45Wh9DqWIPZOng8ZpKVGW6v3oUCAMrlx53t9LUT9Sd8oQrhsx3nwgr/CUb
SmZiBFF5kWpK8CgG82PuDlCHEnsI4SEatYqHtEMYRBfE0K8fzROye7e7WCKBsb/8
QaDf1RrQ599GXLMVJzbFsXpybBwaaP7LWkKCDHfQbAeKZ6EAWH0agbvUq2X1H2nm
/a3Th5SgL6Vm6KXYvIFGHyTq8rbPLg==
=OkNz
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.10-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.11
A collection of driver specific fixes, mostly for x86 systems (or CODECs
used mostly on x86) and all for relatively minor issues, the biggest one
being fixing S24_LE format on Keem Bay systems.
