IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Update the MAC addresses that are registered with a LEARNING_SYNC qeth
device with the events announced by the attached software bridge.
Typically the LEARNING_SYNC qeth bridge port has an isolated sibling (the
default interface of an 'HiperSockets Converged Interface' (HSCI)). Update
the MACs of isolated siblings as well, to avoid unnecessary flooding in
the attached virtualized switches.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QETH HiperSockets devices with LEARNING_SYNC capability can be used
to construct a linux bridge with:
2 isolated southbound interfaces:
a) a default network interface
b) a LEARNING-SYNC HiperSockets interface
and 1 non-isolated northbound interface. This is called a 'HiperSockets
Converged Interface' (HSCI).
The existing LEARNING_SYNC functionality is used to update the bridge fdb
with MAC addresses that should be sent-out via the HiperSockets interface,
instead of the default network interface.
Add handling of switchdev events SWITCHDEV_FDB_ADD_TO_DEVICE and
SWITCHDEV_FDB_DEL_TO_DEVICE to the qeth LEARNING_SYNC functionality. Thus
if the northbound bridgeport of an HSCI doesn't only have a single static
MAC address, but instead is a learning bridgeport, work is enqueued, so
the HiperSockets virtual switch (that is external to this Linux instance)
can update its fdb.
When BRIDGE is a loadable module, QETH_L2 mustn't be built-in:
drivers/s390/net/qeth_l2_main.o: in function 'qeth_l2_switchdev_event':
drivers/s390/net/qeth_l2_main.c:927: undefined reference to
'br_port_flag_is_set'
Add Kconfig dependency to enforce usable configurations.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conditionally register a qeth_l2 switchdev_event handler to handle bridge
to device switchdev events, when at least one qeth interface has the
bridgeport attribute LEARNING_SYNC enabled.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most users of ndo_do_ioctl are ethernet drivers that implement
the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware
timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP.
Separate these from the few drivers that use ndo_do_ioctl to
implement SIOCBOND, SIOCBR and SIOCWANDEV commands.
This is a purely cosmetic change intended to help readers find
their way through the implementation.
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth has both standard MII ioctls and custom SIOCDEVPRIVATE ones,
all of which work correctly with compat user space.
Move the private ones over to the new ndo_siocdevprivate callback.
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Karsten Graul <kgraul@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth uses three device_type structs - a generic one, and one for each
sub-driver (which is used for fixed-layer devices only). Instead of
exporting these device_types back&forth between the driver's modules,
make all the logic self-contained within the sub-drivers.
On disc->setup() they either install their own device_type, or add the
sysfs attributes that are missing in the generic device_type. Later on
disc->remove() these attributes are removed again from any device that
has the generic device_type.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The QETH_PROT_* naming is shared among two unrelated areas - one is
the MPC-level protocol identifiers, the other is the qeth_prot_version
enum.
Rename the MPC definitions to use QETH_MPC_PROT_*.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fb64de1bc3 ("s390/qeth: phase out OSN support") spelled out
why the OSN support in qeth is in a bad shape, and put any remaining
interested parties on notice to speak up before it gets ripped out.
It's 2021 now, so make true on that promise and remove all the
OSN-specific parts from qeth. This also means that we no longer need to
export various parts of the cmd & data path internals to the L2 driver.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without the SWITCHDEV module, the bridgeport attribute LEARNING_SYNC
of the physical device (self) does not provide any functionality.
Instead of calling the no-op stub version of the switchdev functions,
fail the setting of the attribute with an appropriate message.
While at it, also add an error message for the 'not supported by HW'
case.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the large boolean array into a bitmap, this substantially
reduces the struct's size. While at it also clarify the naming.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_tx_complete_buf() is the only remaining user of buf->q, and the
callers can easily provide this as a parameter instead.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maintaining a pointer inside the aob's user-definable area is fragile
and unnecessary. At this stage we only need it to overload the buffer's
state field, and to access the buffer's TX queue.
The first part is easily solved by tracking the aob's state within the
aob itself. This also feels much cleaner and self-contained.
For enabling the access to the associated TX queue, we can store the
queue's index in the aob.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit 396c100472 ("s390/qdio: let driver manage the QAOB")
a pending TX buffer now has access to its associated QAOB during
TX completion processing. We can thus reduce the amount of work & state
propagation that needs to be done by qeth_qdio_handle_aob().
Move all this logic into the respective TX completion paths. Doing so
even allows us to determine more precise TX_NOTIFY_* values via
qeth_compute_cq_notification(aob->aorc, ...).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a recently introduced helper to fill our ethtool stats strings.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have one field to track _whether_ a cmd is active on a ccw device
('irq_pending'), and one to track _which_ cmd it is ('active_cmd').
Get rid of the irq_pending field, by testing active_cmd for NULL.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set scan_threshold = 0 to opt out from the qdio layer's internal tasklet
& timer mechanism for TX completions, and replace it with the TX NAPI
infrastructure that qeth already uses for IQD devices. This avoids the
fragile logic in qdio_check_output_queue(), enables tighter integration
and gives us more tuning options via ethtool in the future.
For now we continue to apply the same policy as the qdio layer:
scan for completions if 32 TX buffers are in use, or after 1 sec.
A re-scan is done after 10 sec, but only if no TX interrupt is pending.
With scan_threshold = 0 we no longer get TX completion scans from
within qdio_get_next_buffers(). So trigger these manually in qeth_poll()
and in the RX path switch to the equivalent qdio_inspect_queue().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While the qdio layer already tracks the number of HW interrupts for a
device, there's value in understanding how many of them have been
raised due to our TX completion logic.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
The ifmcaddr6 has been protected by inet6_dev->lock(rwlock) so that
the critical section is atomic context. In order to switch this context,
changing locking is needed. The ifmcaddr6 actually already protected by
RTNL So if it's converted to use RCU, its control path context can be
switched to sleepable.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are spending way too much effort on qdio-internal bookkeeping for
QAOB management & caching, and it's still not robust. Once qdio's
TX path has detached the QAOB from a PENDING buffer, we lost all
track of it until it shows up in a CQ notification again. So if the
device is torn down before that notification arrives, we leak the QAOB.
Just have the driver take care of it, and simply pass down a QAOB if
they want a TX with async-completion capability. For a buffer in PENDING
state that requires the QAOB for final completion, qeth can now also try
to recycle the buffer's QAOB rather than unconditionally freeing it.
This also eliminates the qdio_outbuf_state array, which was only needed
to transfer the aob->user1 tag from the driver to the qdio layer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The callbacks have been slimmed down to a level where they no longer do
any actual work. So stop pretending that we support the
NETIF_F_HW_VLAN_CTAG_FILTER feature.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pending TX buffers are completed from the same NAPI code as normal
TX buffers. Pass the NAPI budget to qeth_tx_complete_buf() so that
the freeing of the completed skbs can be deferred.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_init_qdio_out_buf() is typically called during initialization, and
the GFP_ATOMIC is only needed for a very specific & rare case during TX
completion.
Allow callers to specify a gfp mask, so that the initialization path can
select GFP_KERNEL. While at it also clarify the function name.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cited commit reworked the state machine for pending TX buffers.
In qeth_iqd_tx_complete() it turned PENDING into a transient state, and
uses NEED_QAOB for buffers that get parked while waiting for their QAOB
completion.
But it missed to adjust the check in qeth_tx_complete_buf(). So if
qeth_tx_complete_pending_bufs() is called during teardown to drain
the parked TX buffers, we no longer raise a notification for af_iucv.
Instead of updating the checked state, just move this code into
qeth_tx_complete_pending_bufs() itself. This also gets rid of the
special-case in the common TX completion path.
Fixes: 8908f36d20 ("s390/qeth: fix af_iucv notification race")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a QAOB notifies us that a pending TX buffer has been delivered, the
actual TX completion processing by qeth_tx_complete_pending_bufs()
is done within the context of a TX NAPI instance. We shouldn't rely on
this instance being scheduled by some other TX event, but just do it
ourselves.
qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI
instance. To avoid touching the TX queue's NAPI instance
before/after it is (un-)registered, reorder the code in qeth_open()
and qeth_stop() accordingly.
Fixes: 0da9581ddb ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current design attaches a pending TX buffer to a custom
single-linked list, which is anchored at the buffer's slot on the
TX ring. The buffer is then checked for final completion whenever
this slot is processed during a subsequent TX NAPI poll cycle.
But if there's insufficient traffic on the ring, we might never make
enough progress to get back to this ring slot and discover the pending
buffer's final TX completion. In particular if this missing TX
completion blocks the application from sending further traffic.
So convert the custom single-linked list code to a per-queue list_head,
and scan this list on every TX NAPI cycle.
Fixes: 0da9581ddb ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When qeth_alloc_qdio_queues() fails to allocate one of the buffers that
back an Output Queue, the 'out_freeoutqbufs' path will free all
previously allocated buffers for this queue. But it misses to free the
half-finished queue struct itself.
Move the buffer allocation into qeth_alloc_output_queue(), and deal with
such errors internally.
Fixes: 0da9581ddb ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Convert to using the generic entry infrastructure.
- Add vdso time namespace support.
- Switch s390 and alpha to 64-bit ino_t. As discussed here
lkml.kernel.org/r/YCV7QiyoweJwvN+m@osiris
- Get rid of expensive stck (store clock) usages where possible. Utilize
cpu alternatives to patch stckf when supported.
- Make tod_clock usage less error prone by converting it to a union and
rework code which is using it.
- Machine check handler fixes and cleanups.
- Drop couple of minor inline asm optimizations to fix clang build.
- Default configs changes notably to make libvirt happy.
- Various changes to rework and improve qdio code.
- Other small various fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmAyzcwACgkQjYWKoQLX
FBjjMwgAmeY3oMkj93bnUF/OnbYTJQ0ZHmlyeboKt7SnFyvNpOVGyRfl7+fPHsNu
+t9QZQk0f7fSxbcC04gz0ZMw1YbTjWihgZJsN6s+qtrRsv/kVqKr7kvhFrcs8uSZ
rLiwIRWGVAbprnJZWCNqaGpKkOM0wPYZ5W3Mtnoxe4nTM2LwSu2RWI8ibTGYLQPy
FybKos2hYOFBTGQdrxmg1zAvpE8DJg4qQNLhYvnmHd8Bw/FNBmoyhx8rS8z06NmS
dWMk7pfvQaslIIaFC3Yo7/sJVa/JJH33FlBonc+MSO8OZz5O6vG4bk9ZHq6DfHUH
V1I38xiBdYdSXDq8QqT3N9d+CtjeMQ==
=Lt/v
-----END PGP SIGNATURE-----
Merge tag 's390-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Convert to using the generic entry infrastructure.
- Add vdso time namespace support.
- Switch s390 and alpha to 64-bit ino_t. As discussed at
https://lore.kernel.org/linux-mm/YCV7QiyoweJwvN+m@osiris/
- Get rid of expensive stck (store clock) usages where possible.
Utilize cpu alternatives to patch stckf when supported.
- Make tod_clock usage less error prone by converting it to a union and
rework code which is using it.
- Machine check handler fixes and cleanups.
- Drop couple of minor inline asm optimizations to fix clang build.
- Default configs changes notably to make libvirt happy.
- Various changes to rework and improve qdio code.
- Other small various fixes and improvements all over the code.
* tag 's390-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (68 commits)
s390/qdio: remove 'merge_pending' mechanism
s390/qdio: improve handling of PENDING buffers for QEBSM devices
s390/qdio: rework q->qdio_error indication
s390/qdio: inline qdio_kick_handler()
s390/time: remove get_tod_clock_ext()
s390/crypto: use store_tod_clock_ext()
s390/hypfs: use store_tod_clock_ext()
s390/debug: use union tod_clock
s390/kvm: use union tod_clock
s390/vdso: use union tod_clock
s390/time: convert tod_clock_base to union
s390/time: introduce new store_tod_clock_ext()
s390/time: rename store_tod_clock_ext() and use union tod_clock
s390/time: introduce union tod_clock
s390,alpha: switch to 64-bit ino_t
s390: split cleanup_sie
s390: use r13 in cleanup_sie as temp register
s390: fix kernel asce loading when sie is interrupted
s390: add stack for machine check handler
s390: use WRITE_ONCE when re-allocating async stack
...
For non-QEBSM devices, get_buf_states() merges PENDING and EMPTY buffers
into a single group of finished buffers. To allow the upper-layer driver
to differentiate between the two states, qdio_check_pending() looks at
each buffer's state again and sets the sbal_state flag to
QDIO_OUTBUF_STATE_FLAG_PENDING accordingly.
So effectively we're spending overhead on _every_ Output Queue
inspection, just to avoid some additional TX completion calls in case
a group of buffers has completed with mixed EMPTY / PENDING state.
Given that PENDING buffers should rarely occur, this is a bad trade-off.
In particular so as the additional checks in get_buf_states() affect
_all_ device types (even those that don't use the PENDING state).
Rip it all out, and just report the PENDING completions separately as
we already do for QEBSM devices.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
For QEBSM devices the 'merge_pending' mechanism in get_buf_states()
doesn't apply, and we can actually get SLSB_P_OUTPUT_PENDING returned.
So for this case propagating the PENDING state to the driver via the
queue's sbal_state doesn't make sense and creates unnecessary overhead.
Instead introduce a new QDIO_ERROR_* flag that gets passed to the
driver, and triggers the same processing as if the buffers were flagged
as QDIO_OUTBUF_STATE_FLAG_PENDING.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Stop maintaining the skb_send_q list for TRANS_HIPER sockets.
Not only is it extra overhead, but keeping around a list of skb clones
means that we later also have to match the ->sk_txnotify() calls
against these clones and free them accordingly.
The current matching logic (comparing the skbs' shinfo location) is
frustratingly fragile, and breaks if the skb's head is mangled in any
sort of way while passing from dev_queue_xmit() to the device's
HW queue.
Also adjust the interface for ->sk_txnotify(), to make clear that we
don't actually care about any skb internals.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When do_qdio() returns with an unexpected error, qeth_flush_buffers()
kicks off a recovery action.
In such a case there's no point in starting TX completion processing,
the device gets torn down anyway. So take a closer look at do_qdio()'s
return value, and skip the TX completion processing accordingly.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As part of the TX queue selection for af_iucv skbs,
qeth_l3_get_cast_type_rcu() ends up calling qeth_get_ether_cast_type().
Which is rather fragile, since such skbs don't have a proper ETH header
and we rely on it being zeroed out in the right places. Add a separate
case for ETH_P_AF_IUCV instead that does the right thing.
When later building the HW header for such skbs, don't hard-code the
cast type but follow the same path as for other protocol types. Here
the cast type should naturally come from the skb's queue mapping.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qeth_l3_hard_start_xmit() already determined the skb's proto. Avoid
doing so a second time when it calls qeth_l3_get_cast_type().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace our home-grown helper with the more robust vlan_get_protocol().
This is pretty much a 1:1 replacement, we just need to pass around a
proper ETH_P_* everyhwere and convert the old value range.
For readability also convert the protocol checks in
qeth_l3_hard_start_xmit() to a switch statement.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have two usage patterns:
1. get & ->setup() a new discipline, or
2. ->remove() & put the currently loaded one.
Add corresponding helpers that hide the internals & error handling.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_finish_output_gso() may call .ndo_features_check() even before the
skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt
to inspect the L2 header via vlan_eth_hdr().
Switch to vlan_get_protocol(), as already used further down in the
common qeth_features_check() path.
Fixes: f13ade1993 ("s390/qeth: run non-offload L3 traffic over common xmit path")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to insufficient locking, qeth_core_set_online() and
qeth_dev_layer2_store() can run in parallel, both attempting to load &
setup the discipline (and stepping on each other toes along the way).
A similar race can also occur between qeth_core_remove_device() and
qeth_dev_layer2_store().
Access to .discipline is meant to be protected by the discipline_mutex,
so add/expand the locking in qeth_core_remove_device() and
qeth_core_set_online().
Adjust the locking in qeth_l*_remove_device() accordingly, as it's now
handled by the callers in a consistent manner.
Based on an initial patch by Ursula Braun.
Fixes: 9dc48ccc68 ("qeth: serialize sysfs-triggered device configurations")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When qeth_dev_layer2_store() - holding the discipline_mutex - waits
inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete,
we can hit a deadlock if qeth_do_reset() concurrently calls
qeth_set_online() and thus tries to aquire the discipline_mutex.
Move the discipline_mutex locking outside of qeth_set_online() and
qeth_set_offline(), and turn the discipline into a parameter so that
callers understand the dependency.
To fix the deadlock, we can now relax the locking:
As already established, qeth_l*_remove_device() waits for
qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk
of having card->discipline ripped out while it's running, and thus
doesn't need to take the discipline_mutex.
Fixes: 9dc48ccc68 ("qeth: serialize sysfs-triggered device configurations")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When qeth_qdio_handle_aob() frees dangling allocations in the notified
TX buffer, there are rare tear-down cases where
qeth_drain_output_queue() would later call qeth_clear_output_buffer()
for the same buffer - and thus end up walking the buffer a second time
to check for dangling kmem_cache allocations.
Luckily current code previously scrubs such a buffer, so
qeth_clear_output_buffer() would find buf->buffer->element[i].addr as
NULL and not do anything. But this is fragile, and we can easily improve
it by consistently clearing the ->is_header flag after freeing the
allocation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse the QETH_QDIO_BUF_EMPTY state to indicate that a TX buffer has
been completed with a QAOB notification, and may be cleaned up by
qeth_cleanup_handled_pending().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For TX buffers that require an additional async notification via QAOB, the
TX completion code can now manage all the necessary processing if the
notification has already occurred (or is occurring concurrently).
In such cases we can avoid replacing the metadata that is associated
with the buffer's slot on the ring, and just keep using the current one.
As qeth_clear_output_buffer() will also handle any kmem cache-allocated
memory that was mapped into the TX buffer, qeth_qdio_handle_aob()
doesn't need to worry about it.
While at it, also remove the unneeded forward declaration for
qeth_init_qdio_out_buf().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All qeth devices have a minimum set of sysfs attributes, and non-OSN
devices share a group of additional attributes. Depending on whether
the device is forced to use a specific discipline, the device_type then
specifies further attributes.
Shift the common attributes into dev->groups, so that the device_type
only contains the discipline-specific attributes. This avoids exposing
the common attributes to the disciplines, and nicely cleans up our
sysfs code.
While replacing the qeth_l*_*_device_attributes() helpers, switch from
sysfs_*_groups() to the more generic device_*_groups().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
INIT_LIST_HEAD() only needs to be called on actual list heads.
While at it clarify the naming of the field.
Suggested-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gfp_type() uses in_interrupt() to figure out the correct GFP mask.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
ctcmpc_tx() is used as net_device_ops::ndo_start_xmit. This callback is
invoked with disabled bottom halves.
Use GFP_ATOMIC for memory allocation in ctcmpc_tx().
Remove gfp_type() since the last user is gone.
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gfp_type() uses in_interrupt() to figure out the correct GFP mask.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The memory allocation of `ch' a few lines above is using GFP_KERNEL,
also an allocation a few lines later is using GFP_KERNEL.
Use GFP_KERNEL for the memory allocation.
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gfp_type() uses in_interrupt() to figure out the correct GFP mask.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
The call chain of ctcmpc_unpack_skb():
ctcmpc_bh()
-> ctcmpc_unpack_skb()
ctcmpc_bh() is a tasklet handler so GFP_ATOMIC is needed.
Use GFP_ATOMIC as allocation type in ctcmpc_unpack_skb().
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
