IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Attemting to do sock_lock on .recvmsg may cause a deadlock as shown
bellow, so instead of using sock_sock this uses sk_receive_queue.lock
on bt_sock_ioctl to avoid the UAF:
INFO: task kworker/u9:1:121 blocked for more than 30 seconds.
Not tainted 6.7.6-lemon #183
Workqueue: hci0 hci_rx_work
Call Trace:
<TASK>
__schedule+0x37d/0xa00
schedule+0x32/0xe0
__lock_sock+0x68/0xa0
? __pfx_autoremove_wake_function+0x10/0x10
lock_sock_nested+0x43/0x50
l2cap_sock_recv_cb+0x21/0xa0
l2cap_recv_frame+0x55b/0x30a0
? psi_task_switch+0xeb/0x270
? finish_task_switch.isra.0+0x93/0x2a0
hci_rx_work+0x33a/0x3f0
process_one_work+0x13a/0x2f0
worker_thread+0x2f0/0x410
? __pfx_worker_thread+0x10/0x10
kthread+0xe0/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Fixes: 2e07e8348ea4 ("Bluetooth: af_bluetooth: Fix Use-After-Free in bt_sock_recvmsg")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes attempting to access past ethhdr.h_source, although it seems
intentional to copy also the contents of h_proto this triggers
out-of-bound access problems with the likes of static analyzer, so this
instead just copy ETH_ALEN and then proceed to use put_unaligned to copy
h_proto separetely.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
struct hci_dev_info has a fixed size name[8] field so in the event that
hdev->name is bigger than that strcpy would attempt to write past its
size, so this fixes this problem by switching to use strscpy.
Fixes: dcda165706b9 ("Bluetooth: hci_core: Fix build warnings")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In a few cases the stack may generate commands as responses to events
which would happen to overwrite the sent_cmd, so this attempts to store
the request in req_skb so even if sent_cmd is replaced with a new
command the pending request will remain in stored in req_skb.
Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If HCI_PA_SYNC flag is set it means there is a Periodic Advertising
Synchronization pending, so this attempts to locate the address passed
to HCI_OP_LE_PA_CREATE_SYNC and program it in the accept list so only
reports with that address are processed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to reassemble PA data for a Broadcast Sink
listening socket. This is needed in case the BASE is received
fragmented in multiple PA reports.
PA data is first reassembled inside the hcon, before the BASE
is extracted and stored inside the socket. The length of the
le_per_adv_data hcon array has been raised to 1650, to accommodate
the maximum PA data length that can come fragmented, according to
spec.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This creates a hcon instance at bis listen, before the PA sync
procedure is started.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
While waiting for hci_dev_lock the hci_conn object may be cleanup
causing the following trace:
BUG: KASAN: slab-use-after-free in hci_connect_le_scan_cleanup+0x29/0x350
Read of size 8 at addr ffff888001a50a30 by task kworker/u3:1/111
CPU: 0 PID: 111 Comm: kworker/u3:1 Not tainted
6.8.0-rc2-00701-g8179b15ab3fd-dirty #6418
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38
04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x21/0x70
print_report+0xce/0x620
? preempt_count_sub+0x13/0xc0
? __virt_addr_valid+0x15f/0x310
? hci_connect_le_scan_cleanup+0x29/0x350
kasan_report+0xdf/0x110
? hci_connect_le_scan_cleanup+0x29/0x350
hci_connect_le_scan_cleanup+0x29/0x350
create_le_conn_complete+0x25c/0x2c0
Fixes: 881559af5f5c ("Bluetooth: hci_sync: Attempt to dequeue connection attempt")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the bt_type and
bnep_type variables to be constant structures as well, placing it into
read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If connection is still queued/pending in the cmd_sync queue it means no
command has been generated and it should be safe to just dequeue the
callback when it is being aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the UAF on __hci_acl_create_connection_sync caused by
connection abortion, it uses the same logic as to LE_LINK which uses
hci_cmd_sync_cancel to prevent the callback to run if the connection is
abort prematurely.
Reported-by: syzbot+3f0a39be7a2035700868@syzkaller.appspotmail.com
Fixes: 45340097ce6e ("Bluetooth: hci_conn: Only do ACL connections sequentially")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This aligns the use socket sk_timeo as conn_timeout when initiating a
connection and then use it when scheduling the resulting HCI command,
that way the command is actually aborted synchronously thus not
blocking commands generated by hci_abort_conn_sync to inform the
controller the connection is to be aborted.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit cec9f3c5561d ("Bluetooth: Remove BT_HS") removes config BT_HS, but
misses two "ifdef BT_HS" blocks in hci_event.c.
Remove this dead code from this removed config option.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the last commit we moved to using the hci_sync queue for "Create
Connection" requests, removing the need for retrying the paging after
finished/failed "Create Connection" requests and after the end of
inquiries.
hci_conn_check_pending() was used to trigger this retry, we can remove it
now.
Note that we can also remove the special handling for COMMAND_DISALLOWED
errors in the completion handler of "Create Connection", because "Create
Connection" requests are now always serialized.
This is somewhat reverting commit 4c67bc74f016 ("[Bluetooth] Support
concurrent connect requests").
With this, the BT_CONNECT2 state of ACL hci_conn objects should now be
back to meaning only one thing: That we received a "Connection Request"
from another device (see hci_conn_request_evt), but the response to that
is going to be deferred.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pretty much all bluetooth chipsets only support paging a single device at
a time, and if they don't reject a secondary "Create Connection" request
while another is still ongoing, they'll most likely serialize those
requests in the firware.
With commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect
requests") we started adding some serialization of our own in case the
adapter returns "Command Disallowed" HCI error.
This commit was using the BT_CONNECT2 state for the serialization, this
state is also used for a few more things (most notably to indicate we're
waiting for an inquiry to cancel) and therefore a bit unreliable. Also
not all BT firwares would respond with "Command Disallowed" on too many
connection requests, some will also respond with "Hardware Failure"
(BCM4378), and others will error out later and send a "Connect Complete"
event with error "Rejected Limited Resources" (Marvell 88W8897).
We can clean things up a bit and also make the serialization more reliable
by using our hci_sync machinery to always do "Create Connection" requests
in a sequential manner.
This is very similar to what we're already doing for establishing LE
connections, and it works well there.
Note that this causes a test failure in mgmt-tester (test "Pair Device
- Power off 1") because the hci_abort_conn_sync() changes the error we
return on timeout of the "Create Connection". We'll fix this on the
mgmt-tester side by adjusting the expected error for the test.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BIG Sync (aka. Broadcast sink) requires to inform that the device is
connected when a data path is active otherwise userspace could attempt
to free resources allocated to the device object while scanning.
Fixes: 1d11d70d1f6b ("Bluetooth: ISO: Pass BIG encryption info through QoS")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If command has timed out call __hci_cmd_sync_cancel to notify the
hci_req since it will inevitably cause a timeout.
This also rework the code around __hci_cmd_sync_cancel since it was
wrongly assuming it needs to cancel timer as well, but sometimes the
timers have not been started or in fact they already had timed out in
which case they don't need to be cancel yet again.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We have error defines already, so let's use them.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The "pending connections" feature was originally introduced with commit
4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") and
6bd57416127e ("[Bluetooth] Handling pending connect attempts after
inquiry") to handle controllers supporting only a single connection request
at a time. Later things were extended to also cancel ongoing inquiries on
connect() with commit 89e65975fea5 ("Bluetooth: Cancel Inquiry before
Create Connection").
With commit a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only
opcodes"), hci_conn_check_pending() was introduced as a helper to
consolidate a few places where we check for pending connections (indicated
by the BT_CONNECT2 flag) and then try to connect.
This refactoring commit also snuck in two more calls to
hci_conn_check_pending():
- One is in the failure callback of hci_cs_inquiry(), this one probably
makes sense: If we send an "HCI Inquiry" command and then immediately
after a "Create Connection" command, the "Create Connection" command might
fail before the "HCI Inquiry" command, and then we want to retry the
"Create Connection" on failure of the "HCI Inquiry".
- The other added call to hci_conn_check_pending() is in the event handler
for the "Remote Name" event, this seems unrelated and is possibly a
copy-paste error, so remove that one.
Fixes: a9de9248064b ("[Bluetooth] Switch from OGF+OCF to using only opcodes")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On a lot of platforms (at least the MS Surface devices, M1 macbooks, and
a few ThinkPads) firmware doesn't do its job when rfkilling a device
and the bluetooth adapter is not actually shut down properly on rfkill.
This leads to connected devices remaining in connected state and the
bluetooth connection eventually timing out after rfkilling an adapter.
Use the rfkill hook in the HCI driver to go through the full power-off
sequence (including stopping scans and disconnecting devices) before
rfkilling it, just like MGMT_OP_SET_POWERED would do.
In case anything during the larger power-off sequence fails, make sure
the device is still closed and the rfkill ends up being effective in
the end.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a new state HCI_POWERING_DOWN that indicates that the device is
currently powering down, this will be useful for the next commit.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Queuing of power_off work was introduced in these functions with commits
8b064a3ad377 ("Bluetooth: Clean up HCI state when doing power off") and
c9910d0fb4fc ("Bluetooth: Fix disconnecting connections in non-connected
states") in an effort to clean up state and do things like disconnecting
devices before actually powering off the device.
After that, commit a3172b7eb4a2 ("Bluetooth: Add timer to force power off")
introduced a timeout to ensure that the device actually got powered off,
even if some of the cleanup work would never complete.
This code later got refactored with commit cf75ad8b41d2 ("Bluetooth:
hci_sync: Convert MGMT_SET_POWERED"), which made powering off the device
synchronous and removed the need for initiating the power_off work from
other places. The timeout mentioned above got removed too, because we now
also made use of the command timeout during power on/off.
These days the power_off work still exists, but it only seems to only be
used for HCI_AUTO_OFF functionality, which is why we never noticed
those two leftover places where we queue power_off work. So let's remove
that code.
Fixes: cf75ad8b41d2 ("Bluetooth: hci_sync: Convert MGMT_SET_POWERED")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently getsockopt does not support IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT, and we are unable to get the values of these two
socket options through getsockopt.
This patch adds getsockopt support for IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure ctrl_fill_info() returns sensible error codes and
propagate them out to netlink core. Let netlink core decide
when to return skb->len and when to treat the exit as an
error. Netlink core does better job at it, if we always
return skb->len the core doesn't know when we're done
dumping and NLMSG_DONE ends up in a separate read().
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous change added -EMSGSIZE handling to af_netlink, we don't
have to hide these errors any longer.
Theoretically the error handling changes from:
if (err == -EMSGSIZE)
to
if (err == -EMSGSIZE && skb->len)
everywhere, but in practice it doesn't matter.
All messages fit into NLMSG_GOODSIZE, so overflow of an empty
skb cannot happen.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric points out that our current suggested way of handling
EMSGSIZE errors ((err == -EMSGSIZE) ? skb->len : err) will
break if we didn't fit even a single object into the buffer
provided by the user. This should not happen for well behaved
applications, but we can fix that, and free netlink families
from dealing with that completely by moving error handling
into the core.
Let's assume from now on that all EMSGSIZE errors in dumps are
because we run out of skb space. Families can now propagate
the error nla_put_*() etc generated and not worry about any
return value magic. If some family really wants to send EMSGSIZE
to user space, assuming it generates the same error on the next
dump iteration the skb->len should be 0, and user space should
still see the EMSGSIZE.
This should simplify families and prevent mistakes in return
values which lead to DONE being forced into a separate recv()
call as discovered by Ido some time ago.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is used with the set_eee() ethtool operation. Certain
fields of struct ethtool_keee() are relevant only for the get_eee()
operation. In addition, in case of the ioctl interface, we have no
guarantee that userspace sends sane values in struct ethtool_eee.
Therefore explicitly ignore all fields not needed for set_eee().
This protects from drivers trying to use unchecked and unreliable
data, relying on specific userspace behavior.
Note: Such unsafe driver behavior has been found and fixed in the
tg3 driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ad7ee11e-eb7a-4975-9122-547e13a161d8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While testing for places where zero-sized destinations were still showing
up in the kernel, sock_copy() and inet_reqsk_clone() were found, which
are using very specific memcpy() offsets for both avoiding a portion of
struct sock, and copying beyond the end of it (since struct sock is really
just a common header before the protocol-specific allocation). Instead
of trying to unravel this historical lack of container_of(), just switch
to unsafe_memcpy(), since that's effectively what was happening already
(memcpy() wasn't checking 0-sized destinations while the code base was
being converted away from fake flexible arrays).
Avoid the following false positive warning with future changes to
CONFIG_FORTIFY_SOURCE:
memcpy: detected field-spanning write (size 3068) of destination "&nsk->__sk_common.skc_dontcopy_end" at net/core/sock.c:2057 (size 0)
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240304212928.make.772-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the nfc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240302-class_cleanup-net-next-v1-6-8fa378595b93@marliere.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bridge driver today has no support to forward the userspace timestamp
packets and ends up resetting the timestamp. ETF qdisc checks the
packet coming from userspace and encounters to be 0 thereby dropping
time sensitive packets. These changes will allow userspace timestamps
packets to be forwarded from the bridge to NIC drivers.
Setting the same bit (mono_delivery_time) to avoid dropping of
userspace tstamp packets in the forwarding path.
Existing functionality of mono_delivery_time remains unaltered here,
instead just extended with userspace tstamp support for bridge
forwarding path.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240301201348.2815102-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In tcp_gro_complete() :
Moving the skb->inner_transport_header setting
allows the compiler to reuse the previously loaded value
of skb->transport_header.
Caching skb_shinfo() avoids duplications as well.
In tcp4_gro_complete(), doing a single change on
skb_shinfo(skb)->gso_type also generates better code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the so-called GRO fast path is only enabled for
napi_frags_skb() callers.
After the prior patch, we no longer have to clear frag0 whenever
we pulled bytes to skb->head.
We therefore can initialize frag0 to skb->data so that GRO
fast path can be used in the following additional cases:
- Drivers using header split (populating skb->data with headers,
and having payload in one or more page fragments).
- Drivers not using any page frag (entire packet is in skb->data)
Add a likely() in skb_gro_may_pull() to help the compiler
to generate better code if possible.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
skb_gro_header_hard() is renamed to skb_gro_may_pull() to match
the convention used by common helpers like pskb_may_pull().
This means the condition is inverted:
if (skb_gro_header_hard(skb, hlen))
slow_path();
becomes:
if (!skb_gro_may_pull(skb, hlen))
slow_path();
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
napi_alloc_frag_align() and netdev_alloc_frag_align() accept
align as an argument, and they are thin wrappers around the
__napi_alloc_frag_align() and __netdev_alloc_frag_align() APIs
doing the alignment checking and align mask conversion, in order
to call page_frag_alloc_align() directly. The intention here is
to keep the alignment checking and the alignmask conversion in
in-line wrapper to avoid those kind of operations during execution
time since it can usually be handled during compile time.
We are going to use page_frag_alloc_align() in vhost_net.c, it
need the same kind of alignment checking and alignmask conversion,
so split up page_frag_alloc_align into an inline wrapper doing the
above operation, and add __page_frag_alloc_align() which is passed
with the align mask the original function expected as suggested by
Alexander.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stephen Rothwell and kernel test robot reported that some arches
(parisc, hexagon) and/or compilers would not like blamed commit.
Lets make sure tcp_sock_write_rx group does not start with a hole.
While we are at it, correct tcp_sock_write_tx CACHELINE_ASSERT_GROUP_SIZE()
since after the blamed commit, we went to 105 bytes.
Fixes: 99123622050f ("tcp: remove some holes in struct tcp_sock")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/netdev/20240301121108.5d39e4f9@canb.auug.org.au/
Closes: https://lore.kernel.org/oe-kbuild-all/202403011451.csPYOS3C-lkp@intel.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20240301171945.2958176-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch renames mptcp_pm_nl_get_addr_doit() as a dedicated in-kernel
netlink PM get addr function mptcp_pm_nl_get_addr(). and invoke a new
wrapper mptcp_pm_get_addr() in mptcp_pm_nl_get_addr_doit.
If a token is gotten in the wrapper, that means a userspace PM is used.
So invoke mptcp_userspace_pm_get_addr() to get addr in userspace PM list.
Otherwise, invoke mptcp_pm_nl_get_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements mptcp_userspace_pm_get_addr() to get an address
from userspace pm address list according the given 'token' and 'id'.
Use nla_get_u32() to get the u32 value of 'token', then pass it to
mptcp_token_get_sock() to get the msk. Pass 'msk' and 'id' to the helper
mptcp_userspace_pm_lookup_addr_by_id() to get the address entry. Put
this entry to userspace using mptcp_pm_nl_put_entry_info().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corresponding __lookup_addr_by_id() helper in the in-kernel netlink PM,
this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to
lookup the address entry with the given id on the userspace pm local
address list.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just like MPTCP_PM_ADDR_FLAG_SIGNAL flag is checked in userspace PM
announce mptcp_pm_nl_announce_doit(), PM flags should be checked in
mptcp_pm_nl_subflow_create_doit() too.
If MPTCP_PM_ADDR_FLAG_SUBFLOW flag is not set, there's no flags field
in the output of dump_addr. This looks a bit strange:
id 10 flags 10.0.3.2
This patch uses mptcp_pm_parse_entry() instead of mptcp_pm_parse_addr()
to get the PM flags of the entry and check it. MPTCP_PM_ADDR_FLAG_SIGNAL
flag shouldn't be set here, and if MPTCP_PM_ADDR_FLAG_SUBFLOW flag is
missing from the netlink attribute, always set this flag.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renames mptcp_pm_nl_get_addr_dumpit() as a dedicated in-kernel
netlink PM dump addrs function mptcp_pm_nl_dump_addr(), and invoke a newly
added wrapper mptcp_pm_dump_addr() in mptcp_pm_nl_get_addr_dumpit().
Invoke in-kernel PM dump addrs function mptcp_pm_nl_dump_addr() or
userspace PM dump addrs function mptcp_userspace_pm_dump_addr() based on
whether the token parameter is passed in or not in the wrapper.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds token parameter together with addr in get-addr section in
mptcp_pm.yaml, then use the following commands to update mptcp_pm_gen.c
and mptcp_pm_gen.h:
./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --header \
-o net/mptcp/mptcp_pm_gen.h
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements mptcp_userspace_pm_dump_addr() to dump addresses
from userspace pm address list. Use mptcp_token_get_sock() to get the
msk from the given token, if userspace PM is enabled in it, traverse
each address entry in address list, put every entry to userspace using
mptcp_pm_nl_put_entry_msg().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exports struct mptcp_genl_family and mptcp_nl_fill_addr() helper
to allow them can be used in pm_userspace.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
