Commit Graph

2848 Commits

Author SHA1 Message Date
aa78fa905b parisc: Fix vDSO signal breakage on 32-bit kernel
Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc
signal testcases on a 32-bit kernel.

The trampoline code (sigtramp.S) which is mapped into userspace includes
an offset to the context data on the stack, which is used by gdb and
glibc to get access to registers.

In a 32-bit kernel we used by mistake the offset into the compat context
(which is valid on a 64-bit kernel only) instead of the offset into the
"native" 32-bit context.

Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Fixes: 	df24e1783e ("parisc: Add vDSO support")
CC: stable@vger.kernel.org # 5.18
Signed-off-by: Helge Deller <deller@gmx.de>
2022-07-02 18:36:58 +02:00
96b80fcd27 parisc/unaligned: Fix emulate_ldw() breakage
The commit e8aa7b17fe broke the 32-bit load-word unalignment exception
handler because it calculated the wrong amount of bits by which the value
should be shifted. This patch fixes it.

Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: e8aa7b17fe ("parisc/unaligned: Rewrite inline assembly of emulate_ldw()")
Cc: stable@vger.kernel.org   # v5.18
2022-06-27 21:30:11 +02:00
0a1355db36 parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
Fix a boot crash on a c8000 machine as reported by Dave.  Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.

Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org   # v5.2+
Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/
2022-06-26 12:23:15 +02:00
e9ed22e6e5 parisc: Fix flush_anon_page on PA8800/PA8900
Anonymous pages are allocated with the shared mappings colouring,
SHM_COLOUR. Since the alias boundary on machines with PA8800 and
PA8900 processors is unknown, flush_user_cache_page() might not
flush all mappings of a shared anonymous page. Flushing the whole
data cache flushes all mappings.

This won't fix all coherency issues with shared mappings but it
seems to work well in practice.  I haven't seen any random memory
faults in almost a month on a rp3440 running as a debian buildd
machine.

There is a small preformance hit.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v5.18+
2022-06-26 12:23:15 +02:00
d16c5c7c92 parisc: align '*' in comment in math-emu code
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-26 00:19:27 +02:00
1d0811b03e parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
Fix this build error noticed by the kernel test robot:

drivers/video/console/sticore.c:1132:5: error: redefinition of 'fb_is_primary_device'
 arch/parisc/include/asm/fb.h:18:19: note: previous definition of 'fb_is_primary_device'

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org   # v5.10+
2022-06-07 13:01:17 +02:00
71e80720db Merge tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:

 - Fix build regressions for parisc, csky, nios2, openrisc

 - Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT

 - Remove arch/parisc/nm, which was presumably a workaround for old
   tools

 - Check the odd combination of EXPORT_SYMBOL and 'static' precisely

 - Make external module builds robust against "too long argument error"

 - Support j, k keys for moving the cursor in nconfig

* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  kbuild: Allow to select bash in a modified environment
  scripts: kconfig: nconf: make nconfig accept jk keybindings
  modpost: use fnmatch() to simplify match()
  modpost: simplify mod->name allocation
  kbuild: factor out the common objtool arguments
  kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
  kbuild: clean .tmp_* pattern by make clean
  kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
  kbuild: rebuild multi-object modules when objtool is updated
  kbuild: add cmd_and_savecmd macro
  kbuild: make *.mod rule robust against too long argument error
  kbuild: make built-in.a rule robust against too long argument error
  kbuild: check static EXPORT_SYMBOL* by script instead of modpost
  parisc: remove arch/parisc/nm
  kbuild: do not create *.prelink.o for Clang LTO or IBT
  kbuild: replace $(linked-object) with CONFIG options
  kbuild: do not try to parse *.cmd files for objects provided by compiler
  kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
  modpost: squash if...else-if in find_elf_symbol2()
  modpost: reuse ARRAY_SIZE() macro for section_mismatch()
  ...
2022-06-05 09:06:03 -07:00
23df9ba64b Merge tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
 "A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and
  add auto-detection of primary graphics card for framebuffer driver"

* tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc/stifb: Keep track of hardware path of graphics card
  parisc/stifb: Implement fb_is_primary_device()
  parisc: fix a crash with multicore scheduler
2022-06-04 13:50:23 -07:00
cf936af790 parisc/stifb: Implement fb_is_primary_device()
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v5.10+
2022-06-04 15:47:03 +02:00
1ec6574a3c Merge tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull kthread updates from Eric Biederman:
 "This updates init and user mode helper tasks to be ordinary user mode
  tasks.

  Commit 40966e316f ("kthread: Ensure struct kthread is present for
  all kthreads") caused init and the user mode helper threads that call
  kernel_execve to have struct kthread allocated for them. This struct
  kthread going away during execve in turned made a use after free of
  struct kthread possible.

  Here, commit 343f4c49f2 ("kthread: Don't allocate kthread_struct for
  init and umh") is enough to fix the use after free and is simple
  enough to be backportable.

  The rest of the changes pass struct kernel_clone_args to clean things
  up and cause the code to make sense.

  In making init and the user mode helpers tasks purely user mode tasks
  I ran into two complications. The function task_tick_numa was
  detecting tasks without an mm by testing for the presence of
  PF_KTHREAD. The initramfs code in populate_initrd_image was using
  flush_delayed_fput to ensuere the closing of all it's file descriptors
  was complete, and flush_delayed_fput does not work in a userspace
  thread.

  I have looked and looked and more complications and in my code review
  I have not found any, and neither has anyone else with the code
  sitting in linux-next"

* tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sched: Update task_tick_numa to ignore tasks without an mm
  fork: Stop allowing kthreads to call execve
  fork: Explicitly set PF_KTHREAD
  init: Deal with the init process being a user mode process
  fork: Generalize PF_IO_WORKER handling
  fork: Explicity test for idle tasks in copy_thread
  fork: Pass struct kernel_clone_args into copy_thread
  kthread: Don't allocate kthread_struct for init and umh
2022-06-03 16:03:05 -07:00
932c2989b5 Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.19-rc1.

  Lots of tiny cleanups in here, the major stuff is:

   - termbit cleanups and unification by Ilpo. A much needed change that
     goes a long way to making things simpler for all of the different
     arches

   - tty documentation cleanups and movements to their own place in the
     documentation tree

   - old tty driver cleanups and fixes from Jiri to bring some existing
     drivers into the modern world

   - RS485 cleanups and unifications to make it easier for individual
     drivers to support this mode instead of having to duplicate logic
     in each driver

   - Lots of 8250 driver updates and additions

   - new device id additions

   - n_gsm continued fixes and cleanups

   - other minor serial driver updates and cleanups

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
  tty: Rework receive flow control char logic
  pcmcia: synclink_cs: Don't allow CS5-6
  serial: stm32-usart: Correct CSIZE, bits, and parity
  serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  serial: sifive: Sanitize CSIZE and c_iflag
  serial: sh-sci: Don't allow CS5-6
  serial: txx9: Don't allow CS5-6
  serial: rda-uart: Don't allow CS5-6
  serial: digicolor-usart: Don't allow CS5-6
  serial: uartlite: Fix BRKINT clearing
  serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  serial: msm_serial: disable interrupts in __msm_console_write()
  serial: meson: acquire port->lock in startup()
  serial: 8250_dw: Use dev_err_probe()
  serial: 8250_dw: Use devm_add_action_or_reset()
  ...
2022-06-03 11:08:40 -07:00
6ba6883648 parisc: fix a crash with multicore scheduler
With the kernel 5.18, the system will hang on boot if it is compiled with
CONFIG_SCHED_MC. The last printed message is "Brought up 1 node, 1 CPU".

The crash happens in sd_init
tl->mask (which is cpu_coregroup_mask) returns an empty mask. This happens
	because cpu_topology[0].core_sibling is empty.
Consequently, sd_span is set to an empty mask
sd_id = cpumask_first(sd_span) sets sd_id == NR_CPUS (because the mask is
	empty)
sd->shared = *per_cpu_ptr(sdd->sds, sd_id); sets sd->shared to NULL
	because sd_id is out of range
atomic_inc(&sd->shared->ref); crashes without printing anything

We can fix it by calling reset_cpu_topology() from init_cpu_topology() -
this will initialize the sibling masks on CPUs, so that they're not empty.

This patch also removes the variable "dualcores_found", it is useless,
because during boot, init_cpu_topology is called before
store_cpu_topology. Thus, set_sched_topology(parisc_mc_topology) is never
called. We don't need to call it at all because default_topology in
kernel/sched/topology.c contains the same items as parisc_mc_topology.

Note that we should not call store_cpu_topology() from init_per_cpu()
because it is called too early in the kernel initialization process and it
results in the message "Failure to register CPU0 device". Before this
patch, store_cpu_topology() would exit immediatelly because
cpuid_topo->core id was uninitialized and it was 0.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org	# v5.18
Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-03 09:54:01 +02:00
35b51afd23 Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:

 - Support for the Svpbmt extension, which allows memory attributes to
   be encoded in pages

 - Support for the Allwinner D1's implementation of page-based memory
   attributes

 - Support for running rv32 binaries on rv64 systems, via the compat
   subsystem

 - Support for kexec_file()

 - Support for the new generic ticket-based spinlocks, which allows us
   to also move to qrwlock. These should have already gone in through
   the asm-geneic tree as well

 - A handful of cleanups and fixes, include some larger ones around
   atomics and XIP

* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
  riscv: compat: Using seperated vdso_maps for compat_vdso_info
  RISC-V: Fix the XIP build
  RISC-V: Split out the XIP fixups into their own file
  RISC-V: ignore xipImage
  RISC-V: Avoid empty create_*_mapping definitions
  riscv: Don't output a bogus mmu-type on a no MMU kernel
  riscv: atomic: Add custom conditional atomic operation implementation
  riscv: atomic: Optimize dec_if_positive functions
  riscv: atomic: Cleanup unnecessary definition
  RISC-V: Load purgatory in kexec_file
  RISC-V: Add purgatory
  RISC-V: Support for kexec_file on panic
  RISC-V: Add kexec_file support
  RISC-V: use memcpy for kexec_file mode
  kexec_file: Fix kexec_file.c build error for riscv platform
  riscv: compat: Add COMPAT Kbuild skeletal support
  riscv: compat: ptrace: Add compat_arch_ptrace implement
  riscv: compat: signal: Add rt_frame implementation
  riscv: add memory-type errata for T-Head
  ...
2022-05-31 14:10:54 -07:00
e11a93567d Merge tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
 "Minor cleanups and code optimizations, e.g.:

   - improvements in assembly statements in the tmpalias code path

   - added some additionals compile time checks

   - drop some unneccesary assembler DMA syncs"

* tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
  parisc: Optimize tmpalias function calls
  parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels
  parisc: Fix wrong comment for shr macro
  parisc: Prevent ldil() to sign-extend into upper 32 bits
  parisc: Don't hardcode assembler bit definitions in tmpalias code
  parisc: Don't enforce DMA completion order in cache flushes
  parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font
2022-05-30 11:52:18 -07:00
1ff7bc3ba7 Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
 "These update the ARM cpufreq drivers and fix up the CPPC cpufreq
  driver after recent changes, update the OPP code and PM documentation
  and add power sequences support to the system reboot and power off
  code.

  Specifics:

   - Add Tegra234 cpufreq support (Sumit Gupta)

   - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
     Rex-BC Chen, and Jia-Wei Chang)

   - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
     Pierre Gondois)

   - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
     Oudjana)

   - Use list iterator only inside the list_for_each_entry loop
     (Xiaomeng Tong, and Jakob Koschel)

   - New APIs related to finding OPP based on interconnect bandwidth
     (Krzysztof Kozlowski)

   - Fix the missing of_node_put() in _bandwidth_supported() (Dan
     Carpenter)

   - Cleanups (Krzysztof Kozlowski, and Viresh Kumar)

   - Add Out of Band mode description to the intel-speed-select utility
     documentation (Srinivas Pandruvada)

   - Add power sequences support to the system reboot and power off code
     and make related platform-specific changes for multiple platforms
     (Dmitry Osipenko, Geert Uytterhoeven)"

* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
  cpufreq: CPPC: Fix unused-function warning
  cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
  Documentation: admin-guide: PM: Add Out of Band mode
  kernel/reboot: Change registration order of legacy power-off handler
  m68k: virt: Switch to new sys-off handler API
  kernel/reboot: Add devm_register_restart_handler()
  kernel/reboot: Add devm_register_power_off_handler()
  soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
  reboot: Remove pm_power_off_prepare()
  regulator: pfuze100: Use devm_register_sys_off_handler()
  ACPI: power: Switch to sys-off handler API
  memory: emif: Use kernel_can_power_off()
  mips: Use do_kernel_power_off()
  ia64: Use do_kernel_power_off()
  x86: Use do_kernel_power_off()
  sh: Use do_kernel_power_off()
  m68k: Switch to new sys-off handler API
  powerpc: Use do_kernel_power_off()
  xen/x86: Use do_kernel_power_off()
  parisc: Use do_kernel_power_off()
  ...
2022-05-30 11:37:26 -07:00
72acadfeb3 parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
Those old syscalls aren't exported via our syscall table, so just drop
them.

Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-30 17:43:44 +02:00
534671e0ef parisc: remove arch/parisc/nm
Parisc overrides 'nm' with a shell script. I was hit by a false-positive
error of $(NM) because this script returns the exit status of grep
instead of ${CROSS_COMPILE}nm. (grep returns 1 if no lines were selected)

I tried to fix it, but in the code review, Helge suggested to remove it
entirely. [1]

This script was added in 2003. [2]

Presumably, it was a workaround for old toolchains (but even the parisc
maintainer does not know the detail any more).

Hopefully, recent tools should work fine.

[1]: https://lore.kernel.org/all/1c12cd26-d8aa-4498-f4c0-29478b9578fe@gmx.de/
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=36eaa6e4c0e0b6950136b956b72fd08155b92ca3

Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
2022-05-29 18:39:35 +09:00
98931dd95f Merge tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
 "Almost all of MM here. A few things are still getting finished off,
  reviewed, etc.

   - Yang Shi has improved the behaviour of khugepaged collapsing of
     readonly file-backed transparent hugepages.

   - Johannes Weiner has arranged for zswap memory use to be tracked and
     managed on a per-cgroup basis.

   - Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
     runtime enablement of the recent huge page vmemmap optimization
     feature.

   - Baolin Wang contributes a series to fix some issues around hugetlb
     pagetable invalidation.

   - Zhenwei Pi has fixed some interactions between hwpoisoned pages and
     virtualization.

   - Tong Tiangen has enabled the use of the presently x86-only
     page_table_check debugging feature on arm64 and riscv.

   - David Vernet has done some fixup work on the memcg selftests.

   - Peter Xu has taught userfaultfd to handle write protection faults
     against shmem- and hugetlbfs-backed files.

   - More DAMON development from SeongJae Park - adding online tuning of
     the feature and support for monitoring of fixed virtual address
     ranges. Also easier discovery of which monitoring operations are
     available.

   - Nadav Amit has done some optimization of TLB flushing during
     mprotect().

   - Neil Brown continues to labor away at improving our swap-over-NFS
     support.

   - David Hildenbrand has some fixes to anon page COWing versus
     get_user_pages().

   - Peng Liu fixed some errors in the core hugetlb code.

   - Joao Martins has reduced the amount of memory consumed by
     device-dax's compound devmaps.

   - Some cleanups of the arch-specific pagemap code from Anshuman
     Khandual.

   - Muchun Song has found and fixed some errors in the TLB flushing of
     transparent hugepages.

   - Roman Gushchin has done more work on the memcg selftests.

  ... and, of course, many smaller fixes and cleanups. Notably, the
  customary million cleanup serieses from Miaohe Lin"

* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
  mm: kfence: use PAGE_ALIGNED helper
  selftests: vm: add the "settings" file with timeout variable
  selftests: vm: add "test_hmm.sh" to TEST_FILES
  selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
  selftests: vm: add migration to the .gitignore
  selftests/vm/pkeys: fix typo in comment
  ksm: fix typo in comment
  selftests: vm: add process_mrelease tests
  Revert "mm/vmscan: never demote for memcg reclaim"
  mm/kfence: print disabling or re-enabling message
  include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
  include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
  mm: fix a potential infinite loop in start_isolate_page_range()
  MAINTAINERS: add Muchun as co-maintainer for HugeTLB
  zram: fix Kconfig dependency warning
  mm/shmem: fix shmem folio swapoff hang
  cgroup: fix an error handling path in alloc_pagecache_max_30M()
  mm: damon: use HPAGE_PMD_SIZE
  tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
  nodemask.h: fix compilation error with GCC12
  ...
2022-05-26 12:32:41 -07:00
df202b452f Merge tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:

 - Add HOSTPKG_CONFIG env variable to allow users to override pkg-config

 - Support W=e as a shorthand for KCFLAGS=-Werror

 - Fix CONFIG_IKHEADERS build to support toybox cpio

 - Add scripts/dummy-tools/pahole to ease distro packagers' life

 - Suppress false-positive warnings from checksyscalls.sh for W=2 build

 - Factor out the common code of arch/*/boot/install.sh into
   scripts/install.sh

 - Support 'kernel-install' tool in scripts/prune-kernel

 - Refactor module-versioning to link the symbol versions at the final
   link of vmlinux and modules

 - Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
   an arch-agnostic way

 - Refactor modpost, Makefiles

* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
  genksyms: adjust the output format to modpost
  kbuild: stop merging *.symversions
  kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
  modpost: extract symbol versions from *.cmd files
  modpost: add sym_find_with_module() helper
  modpost: change the license of EXPORT_SYMBOL to bool type
  modpost: remove left-over cross_compile declaration
  kbuild: record symbol versions in *.cmd files
  kbuild: generate a list of objects in vmlinux
  modpost: move *.mod.c generation to write_mod_c_files()
  modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
  scripts/prune-kernel: Use kernel-install if available
  kbuild: factor out the common installation code into scripts/install.sh
  modpost: split new_symbol() to symbol allocation and hash table addition
  modpost: make sym_add_exported() always allocate a new symbol
  modpost: make multiple export error
  modpost: dump Module.symvers in the same order of modules.order
  modpost: traverse the namespace_list in order
  modpost: use doubly linked list for dump_lists
  modpost: traverse unresolved symbols in order
  ...
2022-05-26 12:09:50 -07:00
7e062cda7d Merge tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
 "Core
  ----

   - Support TCPv6 segmentation offload with super-segments larger than
     64k bytes using the IPv6 Jumbogram extension header (AKA BIG TCP).

   - Generalize skb freeing deferral to per-cpu lists, instead of
     per-socket lists.

   - Add a netdev statistic for packets dropped due to L2 address
     mismatch (rx_otherhost_dropped).

   - Continue work annotating skb drop reasons.

   - Accept alternative netdev names (ALT_IFNAME) in more netlink
     requests.

   - Add VLAN support for AF_PACKET SOCK_RAW GSO.

   - Allow receiving skb mark from the socket as a cmsg.

   - Enable memcg accounting for veth queues, sysctl tables and IPv6.

  BPF
  ---

   - Add libbpf support for User Statically-Defined Tracing (USDTs).

   - Speed up symbol resolution for kprobes multi-link attachments.

   - Support storing typed pointers to referenced and unreferenced
     objects in BPF maps.

   - Add support for BPF link iterator.

   - Introduce access to remote CPU map elements in BPF per-cpu map.

   - Allow middle-of-the-road settings for the
     kernel.unprivileged_bpf_disabled sysctl.

   - Implement basic types of dynamic pointers e.g. to allow for
     dynamically sized ringbuf reservations without extra memory copies.

  Protocols
  ---------

   - Retire port only listening_hash table, add a second bind table
     hashed by port and address. Avoid linear list walk when binding to
     very popular ports (e.g. 443).

   - Add bridge FDB bulk flush filtering support allowing user space to
     remove all FDB entries matching a condition.

   - Introduce accept_unsolicited_na sysctl for IPv6 to implement
     router-side changes for RFC9131.

   - Support for MPTCP path manager in user space.

   - Add MPTCP support for fallback to regular TCP for connections that
     have never connected additional subflows or transmitted
     out-of-sequence data (partial support for RFC8684 fallback).

   - Avoid races in MPTCP-level window tracking, stabilize and improve
     throughput.

   - Support lockless operation of GRE tunnels with seq numbers enabled.

   - WiFi support for host based BSS color collision detection.

   - Add support for SO_TXTIME/SCM_TXTIME on CAN sockets.

   - Support transmission w/o flow control in CAN ISOTP (ISO 15765-2).

   - Support zero-copy Tx with TLS 1.2 crypto offload (sendfile).

   - Allow matching on the number of VLAN tags via tc-flower.

   - Add tracepoint for tcp_set_ca_state().

  Driver API
  ----------

   - Improve error reporting from classifier and action offload.

   - Add support for listing line cards in switches (devlink).

   - Add helpers for reporting page pool statistics with ethtool -S.

   - Add support for reading clock cycles when using PTP virtual clocks,
     instead of having the driver convert to time before reporting. This
     makes it possible to report time from different vclocks.

   - Support configuring low-latency Tx descriptor push via ethtool.

   - Separate Clause 22 and Clause 45 MDIO accesses more explicitly.

  New hardware / drivers
  ----------------------

   - Ethernet:
      - Marvell's Octeon NIC PCI Endpoint support (octeon_ep)
      - Sunplus SP7021 SoC (sp7021_emac)
      - Add support for Renesas RZ/V2M (in ravb)
      - Add support for MediaTek mt7986 switches (in mtk_eth_soc)

   - Ethernet PHYs:
      - ADIN1100 industrial PHYs (w/ 10BASE-T1L and SQI reporting)
      - TI DP83TD510 PHY
      - Microchip LAN8742/LAN88xx PHYs

   - WiFi:
      - Driver for pureLiFi X, XL, XC devices (plfxlc)
      - Driver for Silicon Labs devices (wfx)
      - Support for WCN6750 (in ath11k)
      - Support Realtek 8852ce devices (in rtw89)

   - Mobile:
      - MediaTek T700 modems (Intel 5G 5000 M.2 cards)

   - CAN:
      - ctucanfd: add support for CTU CAN FD open-source IP core from
        Czech Technical University in Prague

  Drivers
  -------

   - Delete a number of old drivers still using virt_to_bus().

   - Ethernet NICs:
      - intel: support TSO on tunnels MPLS
      - broadcom: support multi-buffer XDP
      - nfp: support VF rate limiting
      - sfc: use hardware tx timestamps for more than PTP
      - mlx5: multi-port eswitch support
      - hyper-v: add support for XDP_REDIRECT
      - atlantic: XDP support (including multi-buffer)
      - macb: improve real-time perf by deferring Tx processing to NAPI

   - High-speed Ethernet switches:
      - mlxsw: implement basic line card information querying
      - prestera: add support for traffic policing on ingress and egress

   - Embedded Ethernet switches:
      - lan966x: add support for packet DMA (FDMA)
      - lan966x: add support for PTP programmable pins
      - ti: cpsw_new: enable bc/mc storm prevention

   - Qualcomm 802.11ax WiFi (ath11k):
      - Wake-on-WLAN support for QCA6390 and WCN6855
      - device recovery (firmware restart) support
      - support setting Specific Absorption Rate (SAR) for WCN6855
      - read country code from SMBIOS for WCN6855/QCA6390
      - enable keep-alive during WoWLAN suspend
      - implement remain-on-channel support

   - MediaTek WiFi (mt76):
      - support Wireless Ethernet Dispatch offloading packet movement
        between the Ethernet switch and WiFi interfaces
      - non-standard VHT MCS10-11 support
      - mt7921 AP mode support
      - mt7921 IPv6 NS offload support

   - Ethernet PHYs:
      - micrel: ksz9031/ksz9131: cabletest support
      - lan87xx: SQI support for T1 PHYs
      - lan937x: add interrupt support for link detection"

* tag 'net-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1809 commits)
  ptp: ocp: Add firmware header checks
  ptp: ocp: fix PPS source selector debugfs reporting
  ptp: ocp: add .init function for sma_op vector
  ptp: ocp: vectorize the sma accessor functions
  ptp: ocp: constify selectors
  ptp: ocp: parameterize input/output sma selectors
  ptp: ocp: revise firmware display
  ptp: ocp: add Celestica timecard PCI ids
  ptp: ocp: Remove #ifdefs around PCI IDs
  ptp: ocp: 32-bit fixups for pci start address
  Revert "net/smc: fix listen processing for SMC-Rv2"
  ath6kl: Use cc-disable-warning to disable -Wdangling-pointer
  selftests/bpf: Dynptr tests
  bpf: Add dynptr data slices
  bpf: Add bpf_dynptr_read and bpf_dynptr_write
  bpf: Dynptr support for ring buffers
  bpf: Add bpf_dynptr_from_mem for local dynptrs
  bpf: Add verifier support for dynptrs
  bpf: Suppress 'passing zero to PTR_ERR' warning
  bpf: Introduce bpf_arch_text_invalidate for bpf_prog_pack
  ...
2022-05-25 12:22:58 -07:00
14c03a4a75 Merge back reboot/poweroff notifiers rework for 5.19-rc1. 2022-05-25 14:38:29 +02:00
ac2ab99072 Merge tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
 "These updates continue to refine the work began in 5.17 and 5.18 of
  modernizing the RNG's crypto and streamlining and documenting its
  code.

  New for 5.19, the updates aim to improve entropy collection methods
  and make some initial decisions regarding the "premature next" problem
  and our threat model. The cloc utility now reports that random.c is
  931 lines of code and 466 lines of comments, not that basic metrics
  like that mean all that much, but at the very least it tells you that
  this is very much a manageable driver now.

  Here's a summary of the various updates:

   - The random_get_entropy() function now always returns something at
     least minimally useful. This is the primary entropy source in most
     collectors, which in the best case expands to something like RDTSC,
     but prior to this change, in the worst case it would just return 0,
     contributing nothing. For 5.19, additional architectures are wired
     up, and architectures that are entirely missing a cycle counter now
     have a generic fallback path, which uses the highest resolution
     clock available from the timekeeping subsystem.

     Some of those clocks can actually be quite good, despite the CPU
     not having a cycle counter of its own, and going off-core for a
     stamp is generally thought to increase jitter, something positive
     from the perspective of entropy gathering. Done very early on in
     the development cycle, this has been sitting in next getting some
     testing for a while now and has relevant acks from the archs, so it
     should be pretty well tested and fine, but is nonetheless the thing
     I'll be keeping my eye on most closely.

   - Of particular note with the random_get_entropy() improvements is
     MIPS, which, on CPUs that lack the c0 count register, will now
     combine the high-speed but short-cycle c0 random register with the
     lower-speed but long-cycle generic fallback path.

   - With random_get_entropy() now always returning something useful,
     the interrupt handler now collects entropy in a consistent
     construction.

   - Rather than comparing two samples of random_get_entropy() for the
     jitter dance, the algorithm now tests many samples, and uses the
     amount of differing ones to determine whether or not jitter entropy
     is usable and how laborious it must be. The problem with comparing
     only two samples was that if the cycle counter was extremely slow,
     but just so happened to be on the cusp of a change, the slowness
     wouldn't be detected. Taking many samples fixes that to some
     degree.

     This, combined with the other improvements to random_get_entropy(),
     should make future unification of /dev/random and /dev/urandom
     maybe more possible. At the very least, were we to attempt it again
     today (we're not), it wouldn't break any of Guenter's test rigs
     that broke when we tried it with 5.18. So, not today, but perhaps
     down the road, that's something we can revisit.

   - We attempt to reseed the RNG immediately upon waking up from system
     suspend or hibernation, making use of the various timestamps about
     suspend time and such available, as well as the usual inputs such
     as RDRAND when available.

   - Batched randomness now falls back to ordinary randomness before the
     RNG is initialized. This provides more consistent guarantees to the
     types of random numbers being returned by the various accessors.

   - The "pre-init injection" code is now gone for good. I suspect you
     in particular will be happy to read that, as I recall you
     expressing your distaste for it a few months ago. Instead, to avoid
     a "premature first" issue, while still allowing for maximal amount
     of entropy availability during system boot, the first 128 bits of
     estimated entropy are used immediately as it arrives, with the next
     128 bits being buffered. And, as before, after the RNG has been
     fully initialized, it winds up reseeding anyway a few seconds later
     in most cases. This resulted in a pretty big simplification of the
     initialization code and let us remove various ad-hoc mechanisms
     like the ugly crng_pre_init_inject().

   - The RNG no longer pretends to handle the "premature next" security
     model, something that various academics and other RNG designs have
     tried to care about in the past. After an interesting mailing list
     thread, these issues are thought to be a) mainly academic and not
     practical at all, and b) actively harming the real security of the
     RNG by delaying new entropy additions after a potential compromise,
     making a potentially bad situation even worse. As well, in the
     first place, our RNG never even properly handled the premature next
     issue, so removing an incomplete solution to a fake problem was
     particularly nice.

     This allowed for numerous other simplifications in the code, which
     is a lot cleaner as a consequence. If you didn't see it before,
     https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
     thread worth skimming through.

   - While the interrupt handler received a separate code path years ago
     that avoids locks by using per-cpu data structures and a faster
     mixing algorithm, in order to reduce interrupt latency, input and
     disk events that are triggered in hardirq handlers were still
     hitting locks and more expensive algorithms. Those are now
     redirected to use the faster per-cpu data structures.

   - Rather than having the fake-crypto almost-siphash-based random32
     implementation be used right and left, and in many places where
     cryptographically secure randomness is desirable, the batched
     entropy code is now fast enough to replace that.

   - As usual, numerous code quality and documentation cleanups. For
     example, the initialization state machine now uses enum symbolic
     constants instead of just hard coding numbers everywhere.

   - Since the RNG initializes once, and then is always initialized
     thereafter, a pretty heavy amount of code used during that
     initialization is never used again. It is now completely cordoned
     off using static branches and it winds up in the .text.unlikely
     section so that it doesn't reduce cache compactness after the RNG
     is ready.

   - A variety of functions meant for waiting on the RNG to be
     initialized were only used by vsprintf, and in not a particularly
     optimal way. Replacing that usage with a more ordinary setup made
     it possible to remove those functions.

   - A cleanup of how we warn userspace about the use of uninitialized
     /dev/urandom and uninitialized get_random_bytes() usage.
     Interestingly, with the change you merged for 5.18 that attempts to
     use jitter (but does not block if it can't), the majority of users
     should never see those warnings for /dev/urandom at all now, and
     the one for in-kernel usage is mainly a debug thing.

   - The file_operations struct for /dev/[u]random now implements
     .read_iter and .write_iter instead of .read and .write, allowing it
     to also implement .splice_read and .splice_write, which makes
     splice(2) work again after it was broken here (and in many other
     places in the tree) during the set_fs() removal. This was a bit of
     a last minute arrival from Jens that hasn't had as much time to
     bake, so I'll be keeping my eye on this as well, but it seems
     fairly ordinary. Unfortunately, read_iter() is around 3% slower
     than read() in my tests, which I'm not thrilled about. But Jens and
     Al, spurred by this observation, seem to be making progress in
     removing the bottlenecks on the iter paths in the VFS layer in
     general, which should remove the performance gap for all drivers.

   - Assorted other bug fixes, cleanups, and optimizations.

   - A small SipHash cleanup"

* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
  random: check for signals after page of pool writes
  random: wire up fops->splice_{read,write}_iter()
  random: convert to using fops->write_iter()
  random: convert to using fops->read_iter()
  random: unify batched entropy implementations
  random: move randomize_page() into mm where it belongs
  random: remove mostly unused async readiness notifier
  random: remove get_random_bytes_arch() and add rng_has_arch_random()
  random: move initialization functions out of hot pages
  random: make consistent use of buf and len
  random: use proper return types on get_random_{int,long}_wait()
  random: remove extern from functions in header
  random: use static branch for crng_ready()
  random: credit architectural init the exact amount
  random: handle latent entropy and command line from random_init()
  random: use proper jiffies comparison macro
  random: remove ratelimiting for in-kernel unseeded randomness
  random: move initialization out of reseeding hot path
  random: avoid initializing twice in credit race
  random: use symbolic constants for crng_init states
  ...
2022-05-24 11:58:10 -07:00
c177091849 parisc: Optimize tmpalias function calls
Instead of converting the physical address of the tmpalias mapping to
the tlb insert format inside all the various tmpalias functions, move
this conversion over to the DTLB miss handler. The physical address is
already in %r26 (or will be calculated into %r23), so there are no
additional steps needed in the functions themselves.

Additionally use the dep_safe() and depi_safe() macros to avoid
differentiating between 32- and 64-bit builds and as such make the code
much more readable.

The check if "ldil L%(TMPALIAS_MAP_START)" will sign extend into the
upper 32 bits can be dropped, because we added a compile time check in
an earlier patch.

Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-23 13:44:25 +02:00
cdd00fe6aa parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels
Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-23 13:44:24 +02:00
be6aee1392 parisc: Fix wrong comment for shr macro
The comment that the source and target register can not be the same is
wrong. Instead on PA2.0 usage of extru can clobber upper 32-bits.
This patch fixes the comment.

Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-23 13:44:24 +02:00
44eeb9b567 parisc: Prevent ldil() to sign-extend into upper 32 bits
Add some build time checks to prevent that the various usages of
	"ldil L%(TMPALIAS_MAP_START), %reg"
sign-extends into the upper 32 bits when building a 64-bit kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-23 13:44:24 +02:00
c64c782e58 parisc: Don't hardcode assembler bit definitions in tmpalias code
Remove the hardcoded bit definitions in the tmpalias assembly code.
This makes it easy to change the size of the tmpalias region.

The alignment of the tmpalias region is reduced from 16 MB to 8 MB.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-23 13:44:24 +02:00
1fc7db2401 parisc: Don't enforce DMA completion order in cache flushes
The only place we need to ensure all outstanding cache coherence
operations are complete is in invalidate_kernel_vmap_range. All
parisc drivers synchronize DMA operations internally and do not
call invalidate_kernel_vmap_range. We only need this for non-coherent
I/O operations.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-23 13:44:24 +02:00
f4622fe424 parisc: Use do_kernel_power_off()
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.

Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-05-19 19:30:30 +02:00
44e0b165b6 termbits.h: Remove posix_types.h include
Nothing in termbits seems to require anything from linux/posix_types.h.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:25:26 +02:00
c9b34088e8 termbits.h: Align lines & format
- Align c_cc defines.
- Remove extra newlines.
- Realign & adjust number of leading zeros.
- Reorder c_cflag defines to ascending order
- Make comment ending shorted (=remove period and one extra space from
  the comments in mips).

Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:25:26 +02:00
0b46ac44f2 termbits.h: create termbits-common.h for identical bits
Some defines are the same across all archs. Move the most obvious
intersection to termbits-common.h.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220509093446.6677-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:25:25 +02:00
798082be69 parisc: Fix patch code locking and flushing
This change fixes the following:

1) The flags variable is not initialized. Always use raw_spin_lock_irqsave
and raw_spin_unlock_irqrestore to serialize patching.

2) flush_kernel_vmap_range is primarily intended for DMA flushes.
The whole cache flush in flush_kernel_vmap_range is only possible
when interrupts are enabled on SMP machines. Since __patch_text_multiple
calls flush_kernel_vmap_range with interrupts disabled, it is better
to directly call flush_kernel_dcache_range_asm and
flush_kernel_icache_range_asm.

3) The final call to flush_icache_range is unnecessary.

Tested with `[PATCH, V3] parisc: Rewrite cache flush code for
PA8800/PA8900' change on rp3440, c8000 and c3750 (32 and 64-bit).

Note by Helge:
This patch had been temporarily reverted shortly before v5.18-rc6 in order
to fix boot issues. Now it can be re-applied.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-17 21:52:59 +02:00
2de8b4cc20 parisc: Rewrite cache flush code for PA8800/PA8900
Originally, I was convinced that we needed to use tmpalias flushes
everwhere, for both user and kernel flushes. However, when I modified
flush_kernel_dcache_page_addr, to use a tmpalias flush, my c8000
would crash quite early when booting.

The PDC returns alias values of 0 for the icache and dcache. This
indicates that either the alias boundary is greater than 16MB or
equivalent aliasing doesn't work. I modified the tmpalias code to
make it easy to try alternate boundaries. I tried boundaries up to
128MB but still kernel tmpalias flushes didn't work on c8000.

This led me to conclude that tmpalias flushes don't work on PA8800
and PA8900 machines, and that we needed to flush directly using the
virtual address of user and kernel pages. This is likely the major
cause of instability on the c8000 and rp34xx machines.

Flushing user pages requires doing a temporary context switch as we
have to flush pages that don't belong to the current context. Further,
we have to deal with pages that aren't present. If a page isn't
present, the flush instructions fault on every line.

Other code has been rearranged and simplified based on testing. For
example, I introduced a flush_cache_dup_mm routine. flush_cache_mm
and flush_cache_dup_mm differ in that flush_cache_mm calls
purge_cache_pages and flush_cache_dup_mm calls flush_cache_pages.
In some implementations, pdc is more efficient than fdc. Based on
my testing, I don't believe there's any performance benefit on the
c8000.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-17 21:52:47 +02:00
67c35a3b64 parisc: Disable debug code regarding cache flushes in handle_nadtlb_fault()
Change the "BUG" to "WARNING" and disable the message because it triggers
occasionally in spite of the check in flush_cache_page_if_present.

The pte value extracted for the "from" page in copy_user_highpage is racy and
occasionally the pte is cleared before the flush is complete.  I assume that
the page is simultaneously flushed by flush_cache_mm before the pte is cleared
as nullifying the fdc doesn't seem to cause problems.

I investigated various locking scenarios but I wasn't able to find a way to
sequence the flushes.  This code is called for every COW break and locks impact
performance.

This patch is related to the bigger cache flush patch because we need the pte
on PA8800/PA8900 to flush using the vma context.
I have also seen this from copy_to_user_page and copy_from_user_page.

The messages appear infrequently when enabled.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-17 21:49:06 +02:00
d6da35e0c6 Merge 5.18-rc7 into usb-next
We need the tty fixes in here as well, as we need to revert one of them :(

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-16 15:39:23 +02:00
ae07562909 mm: change huge_ptep_clear_flush() to return the original pte
Patch series "Fix CONT-PTE/PMD size hugetlb issue when unmapping or migrating", v4.

presently, migrating a hugetlb page or unmapping a poisoned hugetlb page,
we'll use ptep_clear_flush() and set_pte_at() to nuke the page table entry
and remap it, and this is incorrect for CONT-PTE or CONT-PMD size hugetlb
page, which will cause potential data consistent issue.  This patch set
will change to use hugetlb related APIs to fix this issue.

Note: Mike pointed out the huge_ptep_get() will only return the one
specific value, and it would not take into account the dirty or young bits
of CONT-PTE/PMDs like the huge_ptep_get_and_clear() [1].  This
inconsistent issue is not introduced by this patch set, and this issue
will be addressed in another thread [2].  Meanwhile the uffd for hugetlb
case [3] pointed out by Gerald also needs another patch to address.

[1] https://lore.kernel.org/linux-mm/85bd80b4-b4fd-0d3f-a2e5-149559f2f387@oracle.com/
[2] https://lore.kernel.org/all/cover.1651998586.git.baolin.wang@linux.alibaba.com/
[3] https://lore.kernel.org/linux-mm/20220503120343.6264e126@thinkpad/


This patch (of 3):

It is incorrect to use ptep_clear_flush() to nuke a hugetlb page table
when unmapping or migrating a hugetlb page, and will change to use
huge_ptep_clear_flush() instead in the following patches.

So this is a preparation patch, which changes the huge_ptep_clear_flush()
to return the original pte to help to nuke a hugetlb page table.

[baolin.wang@linux.alibaba.com: fix build in several more architectures]
  Link: https://lkml.kernel.org/r/0009a4cd-2826-e8be-e671-f050d4f18d5d@linux.alibaba.com
[sfr@canb.auug.org.au: fixup]
  Link: https://lkml.kernel.org/r/20220511181531.7f27a5c1@canb.auug.org.au
Link: https://lkml.kernel.org/r/cover.1652270205.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/20f77ddab90baa249bd24504c413189b82acde69.1652270205.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/cover.1652147571.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/dcf065868cce35bceaf138613ad27f17bb7c0c19.1652147571.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 16:48:55 -07:00
8865bbe6ba parisc: define get_cycles macro for arch-override
PA-RISC defines a get_cycles() function, but it does not do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined. While the
get_cycles() ifdef is not currently used, the following timekeeping
patch in this series will depend on the macro existing (or not existing)
when defining random_get_entropy().

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-05-13 23:59:23 +02:00
9b19e57a3c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts.

Build issue in drivers/net/ethernet/sfc/ptp.c
  54fccfdd7c ("sfc: efx_default_channel_type APIs can be static")
  49e6123c65 ("net: sfc: fix memory leak due to ptp channel")
https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12 16:15:30 -07:00
f774f5bb87 kbuild: factor out the common installation code into scripts/install.sh
Many architectures have similar install.sh scripts.

The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.

The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.

Factor out the generic part into scripts/install.sh.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
2022-05-11 21:45:53 +09:00
ba0c041040 Revert "parisc: Increase parisc_cache_flush_threshold setting"
This reverts commit a58e9d0984.

Triggers segfaults with 32-bit kernels on PA8500 machines.

Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08 20:13:36 +02:00
340233dcc0 parisc: Mark cr16 clock unstable on all SMP machines
The cr16 interval timers are not synchronized across CPUs, even with just
one dual-core CPU. This becomes visible if the machines have a longer
uptime.

Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08 20:01:12 +02:00
a65bcad542 parisc: Fix typos in comments
Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08 20:01:12 +02:00
234ff4c585 parisc: Change MAX_ADDRESS to become unsigned long long
Dave noticed that for the 32-bit kernel MAX_ADDRESS should be a ULL,
otherwise this define would become 0:
	MAX_ADDRESS   (1UL << MAX_ADDRBITS)
It has no real effect on the kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
2022-05-08 20:01:11 +02:00
5b89966bc9 parisc: Merge model and model name into one line in /proc/cpuinfo
The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
2022-05-08 20:01:11 +02:00
1955c4f879 parisc: Re-enable GENERIC_CPU_DEVICES for !SMP
In commit 62773112ac ("parisc: Switch from GENERIC_CPU_DEVICES to
GENERIC_ARCH_TOPOLOGY") GENERIC_CPU_DEVICES was unconditionally turned
off, but this triggers a warning in topology_add_dev(). Turning it back
on for the !SMP case avoids this warning.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 62773112ac ("parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY")
Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08 20:01:11 +02:00
7e93a3dd63 parisc: Update 32- and 64-bit defconfigs
Enable CONFIG_CGROUPS=y on 32-bit defconfig for systemd-support, and
enable CONFIG_NAMESPACES and CONFIG_USER_NS.

Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08 20:01:11 +02:00
0921244f6f parisc: Only list existing CPUs in cpu_possible_mask
The inventory knows which CPUs are in the system, so this bitmask should
be in cpu_possible_mask instead of the bitmask based on CONFIG_NR_CPUS.

Reset the cpu_possible_mask before scanning the system for CPUs, and
mark each existing CPU as possible during initialization of that CPU.

This avoids those warnings later on too:

 register_cpu_capacity_sysctl: too early to get CPU4 device!

Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
2022-05-08 20:01:11 +02:00
6c800d7f55 Revert "parisc: Fix patch code locking and flushing"
This reverts commit a9fe7fa7d8.

Leads to segfaults on 32bit kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
2022-05-08 20:01:11 +02:00
7962c08964 Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"
This reverts commit d97180ad68.

It triggers RCU stalls at boot with a 32-bit kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.15+
2022-05-08 20:01:11 +02:00