IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
regmap_set_bits() and regmap_clear_bits() are variations of
regmap_update_bits() that can be used if all bits of the mask have to be
set to either 1 or 0 respectively.
Update the versaclk driver to use regmap_set_bits() and regmap_clear_bits()
where appropriate. This results in slightly more compact code and also
makes the intention of the code clearer which can help with review.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20220719094637.844946-2-lars@metafoo.de
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The devices of the versaclk clock generator family use an I2C control bus.
IO access on an I2C bus can fail for various reasons.
The driver currently ignores the return value of most IO operations. This
results in silent failure. To avoid this check the return value and in case
of an error abort the operation and propagate the error code to the caller.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20220719094637.844946-1-lars@metafoo.de
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
To make clk-mt8365 compilable as a module there are a few function
symbols missing. This patch adds the required EXPORT_SYMBOL_GPL to the
functions.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20220822152652.3499972-4-msp@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Provide a helper that replaces the kzalloc with devm_kzalloc so error
handling gets easier.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20220822152652.3499972-3-msp@baylibre.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use devm_add_action_or_reset() instead of devres_alloc() and
devres_add(), which works the same. This will simplify the
code. There is no functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220623115719.52683-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Platform driver clk-bcm2835 gets an inaccurate clock for VEC (107MHz).
Export VEC clock trough clk-raspberrypi which uses the right PLL to
get an accurate 108MHz.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
[iivanov: Adapted on top of v5.17-rc6]
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20220829152154.147250-4-iivanov@suse.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk-bcm2835 handling of the pixel clock does not function
correctly when the HDMI power domain is disabled.
The firmware supports it correctly, so add it to the
firmware clock driver.
Acked-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20220829152154.147250-3-iivanov@suse.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Export clock required for RPiVid video decoder hardware.
Cc: Dom Cobley <popcornmix@gmail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20220829152154.147250-2-iivanov@suse.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The return value of bcm2835_clock_rate_from_divisor is always unsigned
and also all caller expect this. So fix the declaration accordingly.
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220904141037.38816-1-stefan.wahren@i2se.com
Reviewed-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
It was reported that RPi3[1] and RPi Zero 2W boards have issues with
the Bluetooth. It turns out that when switching from initial to
operation speed host and device no longer can talk each other because
host uses incorrect UART baud rate.
The UART driver used in this case is amba-pl011. Original fix, see
below Github link[2], was inside pl011 module, but somehow it didn't
look as the right place to fix. Beside that this original rounding
function is not exactly perfect for all possible clock values. So I
deiced to move the hack to the platform which actually need it.
The UART clock is initialised to be as close to the requested
frequency as possible without exceeding it. Now that there is a
clock manager that returns the actual frequencies, an expected
48MHz clock is reported as 47999625. If the requested baud rate
== requested clock/16, there is no headroom and the slight
reduction in actual clock rate results in failure.
If increasing a clock by less than 0.1% changes it from ..999..
to ..000.., round it up.
[1] https://bugzilla.suse.com/show_bug.cgi?id=1188238
[2] ab3f1b3953
Cc: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220912081306.24662-1-iivanov@suse.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When testing for a series affecting the VEC, it was discovered that
turning off and on the VEC clock is crashing the system.
It turns out that, when disabling the VEC clock, it's the only child of
the PLLC-per clock which will also get disabled. The source of the crash
is PLLC-per being disabled.
It's likely that some other device might not take a clock reference that
it actually needs, but it's unclear which at this point. Let's make
PLLC-per critical so that we don't have that crash.
Reported-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220926084509.12233-1-maxime@cerno.tech
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In accordance with the way the MIPS platform is normally design there are
only six clock sources which need to be available on the kernel start in
order to one end up booting correctly:
+ CPU PLL: needed by the r4k and MIPS GIC timer drivers. The former one is
initialized by the arch code, while the later one is implemented in the
mips-gic-timer.c driver as the OF-declared timer.
+ PCIe PLL: required as a parental clock source for the APB/timer domains.
+ APB clock: needed in order to access all the SoC CSRs at least for the
timer OF-declared drivers.
+ APB Timer{0-2} clocks: these are the DW APB timers which drivers
dw_apb_timer_of.c are implemented as the OF-declared timers.
So as long as the clocks above are available early the kernel will
normally work. Let's convert the Baikal-T1 CCU drivers to the platform
device drivers keeping that in mind.
Generally speaking the conversion isn't that complicated since the driver
infrastructure has been designed as flexible enough for that. First we
need to add a new PLL/Divider clock features flag which indicates the
corresponding clock source as a basic one and that clock sources will be
available on the kernel early boot stages. Second the internal PLL/Divider
descriptors need to be initialized with -EPROBE_DEFER value as the
corresponding clock source is unavailable at the early stages. They will
be allocated and initialized on the Baikal-T1 clock platform driver probe
procedure. Finally the already available PLL/Divider init functions need
to be split up into two ones: init procedure performed in the framework of
the OF-declared clock initialization (of_clk_init()), and the probe
procedure called by the platform devices bus driver. Note the later method
will just continue the system clocks initialization started in the former
one.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220929225402.9696-9-Sergey.Semin@baikalelectronics.ru
[sboyd@kernel.org: Remove module things because the Kconfig is still
bool]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Aside with a set of the trigger-like resets Baikal-T1 CCU provides two
additional blocks with directly controlled reset signals. In particular it
concerns DDR full and initial resets and various PCIe sub-domains resets.
Let's add the direct reset assertion/de-assertion of the corresponding
flags support into the Baikal-T1 CCU driver then. It will be required at
least for the PCIe platform driver. Obviously the DDR controller isn't
supposed to be fully reset in the kernel, so the corresponding controls
are added just for the sake of the interface implementation completeness.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220929225402.9696-8-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Before adding the directly controlled resets support it's reasonable to
move the existing resets control functionality into a dedicated object for
the sake of the CCU dividers clock driver simplification. After the new
functionality was added clk-ccu-div.c would have got to a mixture of the
weakly dependent clocks and resets methods. Splitting the methods up into
the two objects will make the code easier to read and maintain. It shall
also improve the code scalability (though hopefully we won't need this
part that much in the future).
The reset control functionality is now implemented in the framework of a
single unit since splitting it up doesn't make much sense due to
relatively simple reset operations. The ccu-rst.c has been designed to be
looking like ccu-div.c or ccu-pll.c with two globally available methods
for the sake of the code unification and better code readability.
This commit doesn't provide any change in the CCU reset implementation
semantics. As before the driver will support the trigger-like CCU resets
only, which are responsible for the AXI-bus, APB-bus and SATA-ref blocks
reset. The assert/de-assert-capable reset controls support will be added
in the next commit.
Note the CCU Clock dividers and resets functionality split up was possible
due to not having any side-effects (at least we didn't found ones) of the
regmap-based concurrent access of the common CCU dividers/reset CSRs.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220929225402.9696-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
It turns out the internal SATA reference clock signal will stay
unavailable for the SATA interface consumer until the buffer on it's way
is ungated. So aside with having the actual clock divider enabled we need
to ungate a buffer placed on the signal way to the SATA controller (most
likely some rudiment from the initial SoC release). Seeing the switch flag
is placed in the same register as the SATA-ref clock divider at a
non-standard ffset, let's implement it as a separate clock controller with
the set-rate propagation to the parental clock divider wrapper. As such
we'll be able to disable/enable and still change the original clock source
rate.
Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220929225402.9696-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Baikal-T1 CCU reference manual says that both xGMAC reference and xGMAC
PTP clocks are generated by two different wrappers with the same constant
divider thus each producing a 156.25 MHz signal. But for some reason both
of these clock sources are gated by a single switch-flag in the CCU
registers space - CCU_SYS_XGMAC_BASE.BIT(0). In order to make the clocks
handled independently we need to define a shared parental gate so the base
clock signal would be switched off only if both of the child-clocks are
disabled.
Note the ID is intentionally set to -2 since we are going to add a one
more internal clock identifier in the next commit.
Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220929225402.9696-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Most likely due to copy-paste mistake the divider has been set to 10 while
according to the SoC reference manual it's supposed to be 8 thus having
PTP clock frequency of 156.25 MHz.
Fixes: 353afa3a8d2e ("clk: Add Baikal-T1 CCU Dividers driver")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20220929225402.9696-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We have discovered random glitches during the system boot up procedure.
The problem investigation led us to the weird outcomes: when none of the
Renesas 5P49V6901 ports are explicitly enabled by the kernel driver, the
glitches disappeared. It was a mystery since the SoC external clock
domains were fed with different 5P49V6901 outputs. The driver code didn't
seem like bogus either. We almost despaired to find out a root cause when
the solution has been found for a more modern revision of the chip. It
turned out the 5P49V6901 clock generator stopped its output for a short
period of time during the VC5_OUT_DIV_CONTROL register writing. The same
problem was found for the 5P49V6965 revision of the chip and was
successfully fixed in commit fc336ae622df ("clk: vc5: fix output disabling
when enabling a FOD") by enabling the "bypass_sync" flag hidden inside
"Unused Factory Reserved Register". Even though the 5P49V6901 registers
description and programming guide doesn't provide any intel regarding that
flag, setting it up anyway in the officially unused register completely
eliminated the denoted glitches. Thus let's activate the functionality
submitted in commit fc336ae622df ("clk: vc5: fix output disabling when
enabling a FOD") for the Renesas 5P49V6901 chip too in order to remove the
ports implicit inter-dependency.
Fixes: dbf6b16f5683 ("clk: vc5: Add support for IDT VersaClock 5P49V6901")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20220929225402.9696-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220913032228.985852-1-yangyingliang@huawei.com
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The PXA168 has a peculiar setup with the AXI clock enable control for
the SDHC controllers. The bits in the SDH0 register control the AXI
clock enable for both SDH0 and SDH1. Likewise, the bits in the SDH2
register control both SDH2 and SDH3. This is modeled with two new
parentless clocks that control the shared bits.
Previously, SDH0 had to be enabled in order for SDH1 to be used, and
when SDH1 was enabled, unused bits in the SDH1 register were being
controlled. This fixes those issues. A future commit will add support
for these new shared clocks to be enabled by the PXA168 SDHC driver.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220612192937.162952-13-doug@schmorgal.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
According to the datasheet, only bit 0 of APBC_GPIO should be controlled
for the clock enable. Bit 1 is marked as reserved (always write 0).
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220612192937.162952-9-doug@schmorgal.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The TWSI, KPC, PWM, and DFC peripherals didn't have their muxes modeled
in the code, but the PXA168 datasheet shows that they are indeed muxed:
- TWSI can be 31.2 MHz or 62.4 MHz
- KPC can be 32 kHz, 16 kHz, or 26 MHz
- PWM can be 13 MHz or 32 kHz
- DFC can be 156 MHz or 78 MHz
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220612192937.162952-8-doug@schmorgal.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The UART, SDHC, LCD, and CCIC peripherals' muxed parent clocks didn't
match the information provided by the PXA168 datasheet:
- The UART clocks can be 58.5 MHz or the UART PLL. Previously, the first
mux option was being calculated as 117 MHz, confirmed on hardware to
be incorrect.
- The SDHC clocks can be 48 MHz, 52 MHz, or 78 MHz. Previously, 48 MHz
and 52 MHz were swapped. 78 MHz wasn't listed as an option.
- The LCD clock can be 624 MHz or 312 Mhz. Previously, it was being
calculated as 312 MHz or 52 MHz.
- The CCIC clock can be 156 MHz or 78 MHz. Previously, it was being
calculated as 312 MHz or 52 MHz.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220612192937.162952-7-doug@schmorgal.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
While working on this series of patches, checkpatch recommended that
an extra const should be added to the mux parent arrays.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220612192937.162952-6-doug@schmorgal.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This commit adds three new clocks that previously didn't exist, but are
needed in order to match the clock parenting as described in the PXA168
datasheet.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220612192937.162952-5-doug@schmorgal.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
These two clocks had multipliers and dividers that didn't match their
names. A subsequent commit goes through all of the existing peripherals
and ensure the correct clocks are being used everywhere.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220612192937.162952-3-doug@schmorgal.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In preparation for adding additional peripherals over time, this commit
adds a bunch of extra APBC_* defines based on information from the
datasheet. It also reorganizes the list of defines to be ordered
sequentially by address (grouped by type).
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220612192937.162952-2-doug@schmorgal.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the list of clocks for the Unisoc UMS512, along with clock
initialization.
Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com>
Link: https://lore.kernel.org/r/20220909152421.278662-3-gengcixi@gmail.com
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge changes regarding the management of ACPI device objects for
6.1-rc1:
- Rename ACPI device object reference counting functions (Rafael
Wysocki).
- Rearrange ACPI device object initialization code (Rafael Wysocki).
- Drop parent field from struct acpi_device (Rafael Wysocki).
- Extend the the int3472-tps68470 driver to support multiple consumers
of a single TPS68470 along with the requisite framework-level
support (Daniel Scally).
* acpi-dev:
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
ACPI: property: Use acpi_dev_parent()
ACPI: Drop redundant acpi_dev_parent() header
ACPI: PM: Fix NULL argument handling in acpi_device_get/set_power()
ACPI: Drop parent field from struct acpi_device
ACPI: scan: Eliminate __acpi_device_add()
ACPI: scan: Rearrange initialization of ACPI device objects
ACPI: scan: Rename acpi_bus_get_parent() and rearrange it
ACPI: Rename acpi_bus_get/put_acpi_device()
Rewrite clk-asm9260 to use parent index to use the reference clock.
During this rework two helpers are added:
- clk_hw_register_mux_table_parent_data() to supplement
clk_hw_register_mux_table() but using parent_data instead of
parent_names
- clk_hw_register_fixed_rate_parent_accuracy() to be used instead of
directly calling __clk_hw_register_fixed_rate(). The later function is
an internal API, which is better not to be called directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220916061740.87167-2-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use parent_hws instead of hanving parent_data with just a single .hw
entry to speed up and simplify parent lookups.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928145609.375860-3-dmitry.baryshkov@linaro.org
The USB controllers on sm6350 do not retain the state when
the system goes into low power state and the GDSCs are
turned off.
This can be observed by the USB connection not coming back alive after
putting the device into suspend, essentially breaking USB.
Fix this by updating the .pwrsts for the USB GDSCs so they only
transition to retention state in low power.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220928132853.179425-1-luca.weiss@fairphone.com
Since commit d399723950c4 ("clk: qcom: gdsc: Fix the handling of
PWRSTS_RET support) retention mode can be used on sc8280xp to maintain
state during suspend instead of leaving the domain always on.
This is needed to eventually allow the parent CX domain to be powered
down during suspend.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220929161124.18138-1-johan+linaro@kernel.org
Since commit 7eb231c337e0 ("PM / Domains: Convert pm_genpd_init() to
return an error code") pm_genpd_init() can return an error which the
caller must handle.
The current error handling was also incomplete as the runtime PM and
regulator use counts were not balanced in all error paths.
Add the missing error handling to the GDSC initialisation to avoid
continuing as if nothing happened on errors.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220929155816.17425-1-johan+linaro@kernel.org
Some groups of clocks of the same type share the same list of parents.
These lists were declared separately for each clock in older drivers,
bloating the code.
Merge some obvious duplicate parent clock lists in the MT8192 clock
driver together to reduce the code size. These include:
- apll_i2s*_m_parents into one as apll_i2s_m_parents
- img1_parents & img2_parents into one as img_parents
- msdc30_*_parents into one as msdc30_parents
- camtg*_parents into cam_tg_parents
- seninf*_parents into seninf_parents
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220926102523.2367530-6-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
During the previous |struct clk| to |struct clk_hw| clk provider API
migration in commit 6f691a586296 ("clk: mediatek: Switch to clk_hw
provider APIs"), a few clk_unregister_*() calls were missed.
Migrate the remaining ones to the |struct clk_hw| provider API, i.e.
change clk_unregister_*() to clk_hw_unregister_*().
Fixes: 6f691a586296 ("clk: mediatek: Switch to clk_hw provider APIs")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220926102523.2367530-3-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
When the cleanup paths for the various clk register APIs in the MediaTek
clk library were added, the one in the dividers type used the wrong type
of unregister function. This would result in incorrect dereferencing of
the clk pointer and freeing of invalid pointers.
Fix this by switching to the correct type of clk unregistration call.
Fixes: 3c3ba2ab0226 ("clk: mediatek: mtk: Implement error handling in register APIs")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220926102523.2367530-2-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Following the changes that were done for mt8183, add a clock notifier
for the GPU PLL selector mux: this allows safe clock rate changes by
temporarily reparenting the GPU to a safe clock (clk26m) while the
MFGPLL is reprogrammed and stabilizes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Following what was done on MT8183 and MT8195, also propagate the rate
changes to MFG_BG3D's parent on MT8192 to allow for proper GPU DVFS.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-10-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
These PLLs are conflicting with GPU rates that can be generated by
the GPU-dedicated MFGPLL and would require a special clock handler
to be used, for very little and ignorable power consumption benefits.
Also, we're in any case unable to set the rate of these PLLs to
something else that is sensible for this task, so simply drop them:
this will make the GPU to be clocked exclusively from MFGPLL for
"fast" rates, while still achieving the right "safe" rate during
PLL frequency locking.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Following the changes done to MT8183, register a similar notifier
for MT8195 as well, allowing safe clockrate updates for the MFGPLL.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220927101128.44758-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
This clock was being registered as clk-composite through the helpers
for the same in the MediaTek clock APIs but, in reality, this isn't
a composite clock.
Appropriately register this clock with devm_clk_hw_register_mux().
No functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
The MFG_BG3D is a gate to enable/disable clock output to the GPU,
but the actual output is decided by multiple muxes; in particular:
mfg_ck_fast_ref muxes between "slow" (top_mfg_core_tmp) and
"fast" (MFGPLL) clock, while top_mfg_core_tmp muxes between the
26MHz clock and various system PLLs.
The clock gate comes after all the muxes, so its parent is
mfg_ck_fast_reg, not top_mfg_core_tmp.
Reparent MFG_BG3D to the latter to match the hardware and add the
CLK_SET_RATE_PARENT flag to it: this way we ensure propagating
rate changes that are requested on MFG_BG3D along its entire clock
tree.
Fixes: 35016f10c0e5 ("clk: mediatek: Add MT8195 mfgcfg clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220927101128.44758-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
