IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit fe1f071438 ]
When the user moves a running task to a new rdtgroup using the task's
file interface or by deleting its rdtgroup, the resulting change in
CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the
task(s) CPUs.
x86 allows reordering loads with prior stores, so if the task starts
running between a task_curr() check that the CPU hoisted before the
stores in the CLOSID/RMID update then it can start running with the old
CLOSID/RMID until it is switched again because __rdtgroup_move_task()
failed to determine that it needs to be interrupted to obtain the new
CLOSID/RMID.
Refer to the diagram below:
CPU 0 CPU 1
----- -----
__rdtgroup_move_task():
curr <- t1->cpu->rq->curr
__schedule():
rq->curr <- t1
resctrl_sched_in():
t1->{closid,rmid} -> {1,1}
t1->{closid,rmid} <- {2,2}
if (curr == t1) // false
IPI(t1->cpu)
A similar race impacts rdt_move_group_tasks(), which updates tasks in a
deleted rdtgroup.
In both cases, use smp_mb() to order the task_struct::{closid,rmid}
stores before the loads in task_curr(). In particular, in the
rdt_move_group_tasks() case, simply execute an smp_mb() on every
iteration with a matching task.
It is possible to use a single smp_mb() in rdt_move_group_tasks(), but
this would require two passes and a means of remembering which
task_structs were updated in the first loop. However, benchmarking
results below showed too little performance impact in the simple
approach to justify implementing the two-pass approach.
Times below were collected using `perf stat` to measure the time to
remove a group containing a 1600-task, parallel workload.
CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads)
# mkdir /sys/fs/resctrl/test
# echo $$ > /sys/fs/resctrl/test/tasks
# perf bench sched messaging -g 40 -l 100000
task-clock time ranges collected using:
# perf stat rmdir /sys/fs/resctrl/test
Baseline: 1.54 - 1.60 ms
smp_mb() every matching task: 1.57 - 1.67 ms
[ bp: Massage commit message. ]
Fixes: ae28d1aae4 ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR")
Fixes: 0efc89be94 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63dc6325ff ]
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after function return, kprobe jump optimization
always fails on the functions with such INT3 inside the function body.
(It already checks the INT3 padding between functions, but not inside
the function)
To avoid this issue, as same as kprobes, check whether the INT3 comes
from kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
Fixes: e463a09af2 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051929.1374301.7419382929328081706.stgit@devnote3
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc1b705b0e ]
AMD's MCA Thresholding feature counts errors of all severity levels, not
just correctable errors. If a deferred error causes the threshold limit
to be reached (it was the error that caused the overflow), then both a
deferred error interrupt and a thresholding interrupt will be triggered.
The order of the interrupts is not guaranteed. If the threshold
interrupt handler is executed first, then it will clear MCA_STATUS for
the error. It will not check or clear MCA_DESTAT which also holds a copy
of the deferred error. When the deferred error interrupt handler runs it
will not find an error in MCA_STATUS, but it will find the error in
MCA_DESTAT. This will cause two errors to be logged.
Check for deferred errors when handling a threshold interrupt. If a bank
contains a deferred error, then clear the bank's MCA_DESTAT register.
Define a new helper function to do the deferred error check and clearing
of MCA_DESTAT.
[ bp: Simplify, convert comment to passive voice. ]
Fixes: 37d43acfd7 ("x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220621155943.33623-1-yazen.ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1993bf9799 upstream.
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after RET instruction, kprobes always failes to
check the probed instruction boundary by decoding the function body if
the probed address is after such sequence. (Note that some conditional
code blocks will be placed after function return, if compiler decides
it is not on the hot path.)
This is because kprobes expects kgdb puts the INT3 as a software
breakpoint and it will replace the original instruction.
But these INT3 are not such purpose, it doesn't need to recover the
original instruction.
To avoid this issue, kprobes checks whether the INT3 is owned by
kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.
Fixes: e463a09af2 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051026.1374301.392728975473572291.stgit@devnote3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be1b670f61 upstream.
The retries in load_ucode_intel_ap() were in place to support systems
with mixed steppings. Mixed steppings are no longer supported and there is
only one microcode image at a time. Any retries will simply reattempt to
apply the same image over and over without making progress.
[ bp: Zap the circumstantial reasoning from the commit message. ]
Fixes: 06b8534cb7 ("x86/microcode: Rework microcode loading")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221129210832.107850-3-ashok.raj@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cefa72129e ]
Intel ICC -hotpatch inserts 2-byte "0x66 0x90" NOP at the start of each
function to reserve extra space for hot-patching, and currently it is not
possible to probe these functions because branch_setup_xol_ops() wrongly
rejects NOP with REP prefix as it treats them like word-sized branch
instructions.
Fixes: 250bbd12c2 ("uprobes/x86: Refuse to attach uprobe to "word-sized" branch insns")
Reported-by: Seiji Nishikawa <snishika@redhat.com>
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20221204173933.GA31544@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50b7b6f29d ]
As io_threads are fully set up USER threads it's clearer to separate the
code path from the KTHREAD logic.
The only remaining difference to user space threads is that io_threads
never return to user space again. Instead they loop within the given
worker function.
The fact that they never return to user space means they don't have an
user space thread stack. In order to indicate that to tools like gdb we
reset the stack and instruction pointers to 0.
This allows gdb attach to user space processes using io-uring, which like
means that they have io_threads, without printing worrying message like
this:
warning: Selected architecture i386:x86-64 is not compatible with reported target architecture i386
warning: Architecture rejected target-supplied description
The output will be something like this:
(gdb) info threads
Id Target Id Frame
* 1 LWP 4863 "io_uring-cp-for" syscall () at ../sysdeps/unix/sysv/linux/x86_64/syscall.S:38
2 LWP 4864 "iou-mgr-4863" 0x0000000000000000 in ?? ()
3 LWP 4865 "iou-wrk-4863" 0x0000000000000000 in ?? ()
(gdb) thread 3
[Switching to thread 3 (LWP 4865)]
#0 0x0000000000000000 in ?? ()
(gdb) bt
#0 0x0000000000000000 in ?? ()
Backtrace stopped: Cannot access memory at address 0x0
Fixes: 4727dc20e0 ("arch: setup PF_IO_WORKER threads like PF_KTHREAD")
Link: https://lore.kernel.org/io-uring/044d0bad-6888-a211-e1d3-159a4aeed52d@polymtl.ca/T/#m1bbf5727e3d4e839603f6ec7ed79c7eebfba6267
Signed-off-by: Stefan Metzmacher <metze@samba.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: Jens Axboe <axboe@kernel.dk>
cc: Andy Lutomirski <luto@kernel.org>
cc: linux-kernel@vger.kernel.org
cc: io-uring@vger.kernel.org
cc: x86@kernel.org
Link: https://lore.kernel.org/r/20210505110310.237537-1-metze@samba.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4727dc20e0 ]
PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the
sense that we don't assign ->set_child_tid with our own structure. Just
ensure that every arch sets up the PF_IO_WORKER threads like kthreads
in the arch implementation of copy_thread().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 12db8b6900 ]
Add TIF_NOTIFY_SIGNAL handling in the generic entry code, which if set,
will return true if signal_pending() is used in a wait loop. That causes an
exit of the loop so that notify_signal tracehooks can be run. If the wait
loop is currently inside a system call, the system call is restarted once
task_work has been processed.
In preparation for only having arch_do_signal() handle syscall restarts if
_TIF_SIGPENDING isn't set, rename it to arch_do_signal_or_restart(). Pass
in a boolean that tells the architecture specific signal handler if it
should attempt to get a signal, or just process a potential syscall
restart.
For !CONFIG_GENERIC_ENTRY archs, add the TIF_NOTIFY_SIGNAL handling to
get_signal(). This is done to minimize the needed architecture changes to
support this feature.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-3-axboe@kernel.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29368e0939 upstream.
The call to rcu_cpu_starting() in mtrr_ap_init() is not early enough
in the CPU-hotplug onlining process, which results in lockdep splats
as follows:
=============================
WARNING: suspicious RCU usage
5.9.0+ #268 Not tainted
-----------------------------
kernel/kprobes.c:300 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 1, debug_locks = 1
no locks held by swapper/1/0.
stack backtrace:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0+ #268
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
dump_stack+0x77/0x97
__is_insn_slot_addr+0x15d/0x170
kernel_text_address+0xba/0xe0
? get_stack_info+0x22/0xa0
__kernel_text_address+0x9/0x30
show_trace_log_lvl+0x17d/0x380
? dump_stack+0x77/0x97
dump_stack+0x77/0x97
__lock_acquire+0xdf7/0x1bf0
lock_acquire+0x258/0x3d0
? vprintk_emit+0x6d/0x2c0
_raw_spin_lock+0x27/0x40
? vprintk_emit+0x6d/0x2c0
vprintk_emit+0x6d/0x2c0
printk+0x4d/0x69
start_secondary+0x1c/0x100
secondary_startup_64_no_verify+0xb8/0xbb
This is avoided by moving the call to rcu_cpu_starting up near
the beginning of the start_secondary() function. Note that the
raw_smp_processor_id() is required in order to avoid calling into lockdep
before RCU has declared the CPU to be watched for readers.
Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/
Reported-by: Qian Cai <cai@redhat.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0dd8d6cb9e ]
There are 4 users of mc146818_get_time() and none of them was checking
the return value from this function. Change this.
Print the appropriate warnings in callers of mc146818_get_time() instead
of in the function mc146818_get_time() itself, in order not to add
strings to rtc-mc146818-lib.c, which is kind of a library.
The callers of alpha_rtc_read_time() and cmos_read_time() may use the
contents of (struct rtc_time *) even when the functions return a failure
code. Therefore, set the contents of (struct rtc_time *) to 0x00,
which looks more sensible then 0xff and aligns with the (possibly
stale?) comment in cmos_read_time:
/*
* If pm_trace abused the RTC for storage, set the timespec to 0,
* which tells the caller that this RTC value is unusable.
*/
For consistency, do this in mc146818_get_time().
Note: hpet_rtc_interrupt() may call mc146818_get_time() many times a
second. It is very unlikely, though, that the RTC suddenly stops
working and mc146818_get_time() would consistently fail.
Only compile-tested on alpha.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-alpha@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-4-mat.jonczyk@o2.pl
Stable-dep-of: cd17420ebe ("rtc: cmos: avoid UIP when writing alarm time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aaa65d17ee upstream.
Support for the TSX control MSR is enumerated in MSR_IA32_ARCH_CAPABILITIES.
This is different from how other CPU features are enumerated i.e. via
CPUID. Currently, a call to tsx_ctrl_is_supported() is required for
enumerating the feature. In the absence of a feature bit for TSX control,
any code that relies on checking feature bits directly will not work.
In preparation for adding a feature bit check in MSR save/restore
during suspend/resume, set a new feature bit X86_FEATURE_TSX_CTRL when
MSR_IA32_TSX_CTRL is present.
[ bp: Remove tsx_ctrl_is_supported()]
[Pawan: Resolved conflicts in backport; Removed parts of commit message
referring to removed function tsx_ctrl_is_supported()]
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/de619764e1d98afbb7a5fa58424f1278ede37b45.1668539735.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6606515742 upstream.
The "force" argument to write_spec_ctrl_current() is currently ambiguous
as it does not guarantee the MSR write. This is due to the optimization
that writes to the MSR happen only when the new value differs from the
cached value.
This is fine in most cases, but breaks for S3 resume when the cached MSR
value gets out of sync with the hardware MSR value due to S3 resetting
it.
When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write
is skipped. Which results in SPEC_CTRL mitigations not getting restored.
Move the MSR write from write_spec_ctrl_current() to a new function that
unconditionally writes to the MSR. Update the callers accordingly and
rename functions.
[ bp: Rework a bit. ]
Fixes: caa0ff24d5 ("x86/bugs: Keep a per-CPU IA32_SPEC_CTRL value")
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/806d39b0bfec2fe8f50dc5446dff20f5bb24a959.1669821572.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 71eac70636 ]
Today, core ID is assumed to be unique within each package.
But an AlderLake-N platform adds a Module level between core and package,
Linux excludes the unknown modules bits from the core ID, resulting in
duplicate core ID's.
To keep core ID unique within a package, Linux must include all APIC-ID
bits for known or unknown levels above the core and below the package
in the core ID.
It is important to understand that core ID's have always come directly
from the APIC-ID encoding, which comes from the BIOS. Thus there is no
guarantee that they start at 0, or that they are contiguous.
As such, naively using them for array indexes can be problematic.
[ dhansen: un-known -> unknown ]
Fixes: 7745f03eb3 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-5-rui.zhang@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b12a7a126 ]
CPUID.1F/B does not enumerate Package level explicitly, instead, all the
APIC-ID bits above the enumerated levels are assumed to be package ID
bits.
Current code gets package ID by shifting out all the APIC-ID bits that
Linux supports, rather than shifting out all the APIC-ID bits that
CPUID.1F enumerates. This introduces problems when CPUID.1F enumerates a
level that Linux does not support.
For example, on a single package AlderLake-N, there are 2 Ecore Modules
with 4 atom cores in each module. Linux does not support the Module
level and interprets the Module ID bits as package ID and erroneously
reports a multi module system as a multi-package system.
Fix this by using APIC-ID bits above all the CPUID.1F enumerated levels
as package ID.
[ dhansen: spelling fix ]
Fixes: 7745f03eb3 ("x86/topology: Add CPUID.1F multi-die/package support")
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221014090147.1836-4-rui.zhang@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb09a37972 ]
CPUID Leaf 0x1F defines a DIE_TYPE level (nb: ECX[8:15] level type == 0x5),
but CPUID Leaf 0xB does not. However, detect_extended_topology() will
set struct cpuinfo_x86.cpu_die_id regardless of whether a valid Die ID
was found.
Only set cpu_die_id if a DIE_TYPE level is found. CPU topology code may
use another value for cpu_die_id, e.g. the AMD NodeId on AMD-based
systems. Code ordering should be maintained so that the CPUID Leaf 0x1F
Die ID value will take precedence on systems that may use another value.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201109210659.754018-5-Yazen.Ghannam@amd.com
Stable-dep-of: 2b12a7a126 ("x86/topology: Fix multiple packages shown on a single-package system")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 230db82413 ]
When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL
enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder,
causing the stack trace to show all text addresses as unreliable:
# echo l > /proc/sysrq-trigger
[ 477.521031] sysrq: Show backtrace of all active CPUs
[ 477.523813] NMI backtrace for cpu 0
[ 477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 #65
[ 477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014
[ 477.526439] Call Trace:
[ 477.526854] <TASK>
[ 477.527216] ? dump_stack_lvl+0xc7/0x114
[ 477.527801] ? dump_stack+0x13/0x1f
[ 477.528331] ? nmi_cpu_backtrace.cold+0xb5/0x10d
[ 477.528998] ? lapic_can_unplug_cpu+0xa0/0xa0
[ 477.529641] ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0
[ 477.530393] ? arch_trigger_cpumask_backtrace+0x1d/0x30
[ 477.531136] ? sysrq_handle_showallcpus+0x1b/0x30
[ 477.531818] ? __handle_sysrq.cold+0x4e/0x1ae
[ 477.532451] ? write_sysrq_trigger+0x63/0x80
[ 477.533080] ? proc_reg_write+0x92/0x110
[ 477.533663] ? vfs_write+0x174/0x530
[ 477.534265] ? handle_mm_fault+0x16f/0x500
[ 477.534940] ? ksys_write+0x7b/0x170
[ 477.535543] ? __x64_sys_write+0x1d/0x30
[ 477.536191] ? do_syscall_64+0x6b/0x100
[ 477.536809] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 477.537609] </TASK>
This happens when the compiled code for show_stack() has a single word
on the stack, and doesn't use a tail call to show_stack_log_lvl().
(CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.) Then the
__unwind_start() skip logic hits an off-by-one bug and fails to unwind
all the way to the intended starting frame.
Fix it by reverting the following commit:
f1d9a2abff ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
The original justification for that commit no longer exists. That
original issue was later fixed in a different way, with the following
commit:
f2ac57a4c4 ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels")
Fixes: f1d9a2abff ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
[jpoimboe: rewrite commit log]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e7ad18d116 upstream.
Currently, the patch application logic checks whether the revision
needs to be applied on each logical CPU (SMT thread). Therefore, on SMT
designs where the microcode engine is shared between the two threads,
the application happens only on one of them as that is enough to update
the shared microcode engine.
However, there are microcode patches which do per-thread modification,
see Link tag below.
Therefore, drop the revision check and try applying on each thread. This
is what the BIOS does too so this method is very much tested.
Btw, change only the early paths. On the late loading paths, there's no
point in doing per-thread modification because if is it some case like
in the bugzilla below - removing a CPUID flag - the kernel cannot go and
un-use features it has detected are there early. For that, one should
use early loading anyway.
[ bp: Fixes does not contain the oldest commit which did check for
equality but that is good enough. ]
Fixes: 8801b3fcb5 ("x86/microcode/AMD: Rework container parsing")
Reported-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ștefan Talpalaru <stefantalpalaru@yahoo.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216211
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 30ea703a38 ]
Include the header containing the prototype of init_ia32_feat_ctl(),
solving the following warning:
$ make W=1 arch/x86/kernel/cpu/feat_ctl.o
arch/x86/kernel/cpu/feat_ctl.c:112:6: warning: no previous prototype for ‘init_ia32_feat_ctl’ [-Wmissing-prototypes]
112 | void init_ia32_feat_ctl(struct cpuinfo_x86 *c)
This warning appeared after commit
5d5103595e ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")
had moved the function init_ia32_feat_ctl()'s prototype from
arch/x86/kernel/cpu/cpu.h to arch/x86/include/asm/cpu.h.
Note that, before the commit mentioned above, the header include "cpu.h"
(arch/x86/kernel/cpu/cpu.h) was added by commit
0e79ad863d ("x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl()")
solely to fix init_ia32_feat_ctl()'s missing prototype. So, the header
include "cpu.h" is no longer necessary.
[ bp: Massage commit message. ]
Fixes: 5d5103595e ("x86/cpu: Reinitialize IA32_FEAT_CTL MSR on BSP during wakeup")
Signed-off-by: Luciano Leão <lucianorsleao@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nícolas F. R. A. Prado <n@nfraprado.net>
Link: https://lore.kernel.org/r/20220922200053.1357470-1-lucianorsleao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 712f210a45 ]
In preparation for reducing the use of ksize(), record the actual
allocation size for later memcpy(). This avoids copying extra
(uninitialized!) bytes into the patch buffer when the requested
allocation size isn't exactly the size of a kmalloc bucket.
Additionally, fix potential future issues where runtime bounds checking
will notice that the buffer was allocated to a smaller value than
returned by ksize().
Fixes: 757885e94a ("x86, microcode, amd: Early microcode patch loading support for AMD")
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/lkml/CA+DvKQ+bp7Y7gmaVhacjv9uF6Ar-o4tet872h4Q8RPYPJjcJQA@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit efd608fa74 upstream.
I encountered some occasional crashes of poke_int3_handler() when
kprobes are set, while accessing desc->vec.
The text poke mechanism claims to have an RCU-like behavior, but it
does not appear that there is any quiescent state to ensure that
nobody holds reference to desc. As a result, the following race
appears to be possible, which can lead to memory corruption.
CPU0 CPU1
---- ----
text_poke_bp_batch()
-> smp_store_release(&bp_desc, &desc)
[ notice that desc is on
the stack ]
poke_int3_handler()
[ int3 might be kprobe's
so sync events are do not
help ]
-> try_get_desc(descp=&bp_desc)
desc = __READ_ONCE(bp_desc)
if (!desc) [false, success]
WRITE_ONCE(bp_desc, NULL);
atomic_dec_and_test(&desc.refs)
[ success, desc space on the stack
is being reused and might have
non-zero value. ]
arch_atomic_inc_not_zero(&desc->refs)
[ might succeed since desc points to
stack memory that was freed and might
be reused. ]
Fix this issue with small backportable patch. Instead of trying to
make RCU-like behavior for bp_desc, just eliminate the unnecessary
level of indirection of bp_desc, and hold the whole descriptor as a
global. Anyhow, there is only a single descriptor at any given
moment.
Fixes: 1f676247f3 ("x86/alternatives: Implement a better poke_int3_handler() completion scheme")
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20220920224743.3089-1-namit@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e52fc2cf3f upstream.
Return trampoline must not use indirect branch to return; while this
preserves the RSB, it is fundamentally incompatible with IBT. Instead
use a retpoline like ROP gadget that defeats IBT while not unbalancing
the RSB.
And since ftrace_stub is no longer a plain RET, don't use it to copy
from. Since RET is a trivial instruction, poke it directly.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.347296408@infradead.org
[cascardo: remove ENDBR]
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[OP: adjusted context for 5.10-stable]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 00b136bb62.
This temporarily reverts the backport of upstream commit
1f001e9da6. It was not correct to copy the
ftrace stub as it would contain a relative jump to the return thunk which
would not apply to the context where it was being copied to, leading to
ftrace support to be broken.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7df548840c upstream.
Older Intel CPUs that are not in the affected processor list for MMIO
Stale Data vulnerabilities currently report "Not affected" in sysfs,
which may not be correct. Vulnerability status for these older CPUs is
unknown.
Add known-not-affected CPUs to the whitelist. Report "unknown"
mitigation status for CPUs that are not in blacklist, whitelist and also
don't enumerate MSR ARCH_CAPABILITIES bits that reflect hardware
immunity to MMIO Stale Data vulnerabilities.
Mitigation is not deployed when the status is unknown.
[ bp: Massage, fixup. ]
Fixes: 8d50cdf8b8 ("x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data")
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/a932c154772f2121794a5f2eded1a11013114711.1657846269.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc2e426b11 upstream.
When meeting ftrace trampolines in ORC unwinding, unwinder uses address
of ftrace_{regs_}call address to find the ORC entry, which gets next frame at
sp+176.
If there is an IRQ hitting at sub $0xa8,%rsp, the next frame should be
sp+8 instead of 176. It makes unwinder skip correct frame and throw
warnings such as "wrong direction" or "can't access registers", etc,
depending on the content of the incorrect frame address.
By adding the base address ftrace_{regs_}caller with the offset
*ip - ops->trampoline*, we can get the correct address to find the ORC entry.
Also change "caller" to "tramp_addr" to make variable name conform to
its content.
[ mingo: Clarified the changelog a bit. ]
Fixes: 6be7fa3c74 ("ftrace, orc, x86: Handle ftrace dynamically allocated trampolines")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220819084334.244016-1-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6cfcdda8c upstream.
AMD's "Technical Guidance for Mitigating Branch Type Confusion,
Rev. 1.0 2022-07-12" whitepaper, under section 6.1.2 "IBPB On
Privileged Mode Entry / SMT Safety" says:
Similar to the Jmp2Ret mitigation, if the code on the sibling thread
cannot be trusted, software should set STIBP to 1 or disable SMT to
ensure SMT safety when using this mitigation.
So, like already being done for retbleed=unret, and now also for
retbleed=ibpb, force STIBP on machines that have it, and report its SMT
vulnerability status accordingly.
[ bp: Remove the "we" and remove "[AMD]" applicability parameter which
doesn't work here. ]
Fixes: 3ebc170068 ("x86/bugs: Add retbleed=ibpb")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # 5.10, 5.15, 5.19
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Link: https://lore.kernel.org/r/20220804192201.439596-1-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8bcedb4ce0 ]
When kernel is booted with idle=nomwait do not use MWAIT as the
default idle state.
If the user boots the kernel with idle=nomwait, it is a clear
direction to not use mwait as the default idle state.
However, the current code does not take this into consideration
while selecting the default idle state on x86.
Fix it by checking for the idle=nomwait boot option in
prefer_mwait_c1_over_halt().
Also update the documentation around idle=nomwait appropriately.
[ dhansen: tweak commit message ]
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lkml.kernel.org/r/fdc2dc2d0a1bc21c2f53d989ea2d2ee3ccbc0dbe.1654538381.git-series.wyes.karny@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2b12993220 upstream.
tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as
documented for RET instructions after VM exits. Mitigate it with a new
one-entry RSB stuffing mechanism and a new LFENCE.
== Background ==
Indirect Branch Restricted Speculation (IBRS) was designed to help
mitigate Branch Target Injection and Speculative Store Bypass, i.e.
Spectre, attacks. IBRS prevents software run in less privileged modes
from affecting branch prediction in more privileged modes. IBRS requires
the MSR to be written on every privilege level change.
To overcome some of the performance issues of IBRS, Enhanced IBRS was
introduced. eIBRS is an "always on" IBRS, in other words, just turn
it on once instead of writing the MSR on every privilege level change.
When eIBRS is enabled, more privileged modes should be protected from
less privileged modes, including protecting VMMs from guests.
== Problem ==
Here's a simplification of how guests are run on Linux' KVM:
void run_kvm_guest(void)
{
// Prepare to run guest
VMRESUME();
// Clean up after guest runs
}
The execution flow for that would look something like this to the
processor:
1. Host-side: call run_kvm_guest()
2. Host-side: VMRESUME
3. Guest runs, does "CALL guest_function"
4. VM exit, host runs again
5. Host might make some "cleanup" function calls
6. Host-side: RET from run_kvm_guest()
Now, when back on the host, there are a couple of possible scenarios of
post-guest activity the host needs to do before executing host code:
* on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not
touched and Linux has to do a 32-entry stuffing.
* on eIBRS hardware, VM exit with IBRS enabled, or restoring the host
IBRS=1 shortly after VM exit, has a documented side effect of flushing
the RSB except in this PBRSB situation where the software needs to stuff
the last RSB entry "by hand".
IOW, with eIBRS supported, host RET instructions should no longer be
influenced by guest behavior after the host retires a single CALL
instruction.
However, if the RET instructions are "unbalanced" with CALLs after a VM
exit as is the RET in #6, it might speculatively use the address for the
instruction after the CALL in #3 as an RSB prediction. This is a problem
since the (untrusted) guest controls this address.
Balanced CALL/RET instruction pairs such as in step #5 are not affected.
== Solution ==
The PBRSB issue affects a wide variety of Intel processors which
support eIBRS. But not all of them need mitigation. Today,
X86_FEATURE_RSB_VMEXIT triggers an RSB filling sequence that mitigates
PBRSB. Systems setting RSB_VMEXIT need no further mitigation - i.e.,
eIBRS systems which enable legacy IBRS explicitly.
However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RSB_VMEXIT
and most of them need a new mitigation.
Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE
which triggers a lighter-weight PBRSB mitigation versus RSB_VMEXIT.
The lighter-weight mitigation performs a CALL instruction which is
immediately followed by a speculative execution barrier (INT3). This
steers speculative execution to the barrier -- just like a retpoline
-- which ensures that speculation can never reach an unbalanced RET.
Then, ensure this CALL is retired before continuing execution with an
LFENCE.
In other words, the window of exposure is opened at VM exit where RET
behavior is troublesome. While the window is open, force RSB predictions
sampling for RET targets to a dead end at the INT3. Close the window
with the LFENCE.
There is a subset of eIBRS systems which are not vulnerable to PBRSB.
Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB.
Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO.
[ bp: Massage, incorporate review comments from Andy Cooper. ]
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28a99e95f5 upstream.
On AMD IBRS does not prevent Retbleed; as such use IBPB before a
firmware call to flush the branch history state.
And because in order to do an EFI call, the kernel maps a whole lot of
the kernel page table into the EFI page table, do an IBPB just in case
in order to prevent the scenario of poisoning the BTB and causing an EFI
call using the unprotected RET there.
[ bp: Massage. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220715194550.793957-1-cascardo@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3131ef39fb upstream.
The build on x86_32 currently fails after commit
9bb2ec608a (objtool: Update Retpoline validation)
with:
arch/x86/kernel/../../x86/xen/xen-head.S:35: Error: no such instruction: `annotate_unret_safe'
ANNOTATE_UNRET_SAFE is defined in nospec-branch.h. And head_32.S is
missing this include. Fix this.
Fixes: 9bb2ec608a ("objtool: Update Retpoline validation")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/63e23f80-033f-f64e-7522-2816debbc367@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edbaf6e5e9 upstream.
The build rightfully complains about:
arch/x86/kernel/kvm.o: warning: objtool: __raw_callee_save___kvm_vcpu_is_preempted()+0x12: missing int3 after ret
because the ASM_RET call is not being used correctly in kvm_vcpu_is_preempted().
This was hand-fixed-up in the kvm merge commit a4cfff3f0f ("Merge branch
'kvm-older-features' into HEAD") which of course can not be backported to
stable kernels, so just fix this up directly instead.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ben Hutchings <bwh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c27c753ea6 upstream.
__static_call_fixup() invokes __static_call_transform() without holding
text_mutex, which causes lockdep to complain in text_poke_bp().
Adding the proper locking cures that, but as this is either used during
early boot or during module finalizing, it's not required to use
text_poke_bp(). Add an argument to __static_call_transform() which tells
it to use text_poke_early() for it.
Fixes: ee88d363d1 ("x86,static_call: Use alternative RET encoding")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ad3278df6 upstream.
Some Intel processors may use alternate predictors for RETs on
RSB-underflow. This condition may be vulnerable to Branch History
Injection (BHI) and intramode-BTI.
Kernel earlier added spectre_v2 mitigation modes (eIBRS+Retpolines,
eIBRS+LFENCE, Retpolines) which protect indirect CALLs and JMPs against
such attacks. However, on RSB-underflow, RET target prediction may
fallback to alternate predictors. As a result, RET's predicted target
may get influenced by branch history.
A new MSR_IA32_SPEC_CTRL bit (RRSBA_DIS_S) controls this fallback
behavior when in kernel mode. When set, RETs will not take predictions
from alternate predictors, hence mitigating RETs as well. Support for
this is enumerated by CPUID.7.2.EDX[RRSBA_CTRL] (bit2).
For spectre v2 mitigation, when a user selects a mitigation that
protects indirect CALLs and JMPs against BHI and intramode-BTI, set
RRSBA_DIS_S also to protect RETs for RSB-underflow case.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
[bwh: Backported to 5.15: adjust context in scattered.c]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2259da159f upstream.
There are some VM configurations which have Skylake model but do not
support IBPB. In those cases, when using retbleed=ibpb, userspace is going
to be killed and kernel is going to panic.
If the CPU does not support IBPB, warn and proceed with the auto option. Also,
do not fallback to IBPB on AMD/Hygon systems if it is not supported.
Fixes: 3ebc170068 ("x86/bugs: Add retbleed=ibpb")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
