iv/linux
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
987,797 Commits 104 Branches 1,843 Tags
f901b4bfd03ed234f72f28e27d965569531dc505
Commit Graph

10 Commits

Author SHA1 Message Date
Alexandre Belloni
024e6f3dce rtc: rv3028: ensure ram configuration registers are saved 
If RV3028_CTRL1_EERD is not set (this is the default), the RTC will refresh
the RAM configuration registers from the EEPROM at midnight. It is
necessary to save the RAM registers back to EEPROM after modifying them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-4-alexandre.belloni@bootlin.com
 2020-10-15 12:09:35 +02:00
Alexandre Belloni
de0ad60e79 rtc: rv3028: factorize EERD bit handling 
Both rv3028_eeprom_write and rv3028_eeprom_read enable EERD before sending
commands to the EEPROM and restore it afterwards. Factorize this code.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-3-alexandre.belloni@bootlin.com
 2020-10-15 12:09:35 +02:00
Alexandre Belloni
c1efae1432 rtc: rv3028: fix trickle resistor values 
Version 1.0 of the application manual had the wrong resistor values. Fix
them according to version 1.1

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-2-alexandre.belloni@bootlin.com
 2020-10-15 12:09:35 +02:00
Alexandre Belloni
00e8e87f10 rtc: rv3028: fix clock output support 
rv3028_clkout_set_rate unconditionally sets RV3028_CLKOUT_CLKOE but
clk_set_rate may be called with the clock disabled. Ensure the clock is
kept disabled if it was not yet enabled.

Also, the actual rate was overwritten when enabling the clock, properly
write to the register only once.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201009153101.721149-1-alexandre.belloni@bootlin.com
 2020-10-15 12:09:34 +02:00
Chuhong Yuan
c3b29bf6f1 rtc: rv3028: Add missed check for devm_regmap_init_i2c() 
rv3028_probe() misses a check for devm_regmap_init_i2c().
Add the missed check to fix it.

Fixes: e6e7376cfd ("rtc: rv3028: add new driver")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200528103950.912353-1-hslester96@gmail.com
 2020-05-30 04:12:43 +02:00
Alexandre Belloni
86e655f9f3 rtc: rv3028: return meaningful value for RTC_VL_READ 
RV3028_STATUS_PORF means the voltage dropped too low and data has been
lost.

Link: https://lore.kernel.org/r/20191214220259.621996-14-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
 2019-12-18 10:37:39 +01:00
Alexandre Belloni
92c02daaba rtc: rv3028: remove RTC_VL_CLR handling 
Remove RTC_VL_CLR handling because it is a disservice to userspace as it
removes the important information that the RTC data is invalid. This may
lead userspace to set an invalid system time later on.

Link: https://lore.kernel.org/r/20191214220259.621996-13-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
 2019-12-18 10:37:37 +01:00
Parthiban Nallathambi
f583c341a5 rtc: rv3028: add clkout support 
rv3028 provides clkout (enabled by default). Add clkout
to clock framework source and control from device tree for
variable frequency with enable and disable functionality.

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Link: https://lore.kernel.org/r/20191018100425.1687979-1-pn@denx.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
 2019-10-19 23:16:57 +02:00
Alexandre Belloni
44c638ce4e rtc: remove superfluous error message 
The RTC core now has error messages in case of registration failure, there
is no need to have other messages in the drivers.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190818220041.17833-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
 2019-08-21 09:57:23 +02:00
Alexandre Belloni
e6e7376cfd rtc: rv3028: add new driver 
Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock
Module that incorporates an integrated CMOS circuit together with an XTAL.
It has an i2c interface.

The driver handles date/time, alarms, trickle charging, timestamping,
frequency offset correction, EEPROM and NVRAM.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
 2019-02-17 21:29:10 +01:00