IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Wired GIP devices present multiple interfaces with the same USB identification
other than the interface number. This adds constants for differentiating two of
them and uses them where appropriate
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230411031650.960322-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
rpi_firmware_get() take reference, we need to release it in error paths
as well. Use devm_rpi_firmware_get() helper to handling the resources.
Also remove the existing rpi_firmware_put().
Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver")
Fixes: 3b8ddff780b7 ("input: raspberrypi-ts: Release firmware handle when not needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20221223074657.810346-1-linmq006@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
After starting to use regmap API to access registers the edt-ft5x06
driver depends on symbols provided by REGMAP_I2C:
edt-ft5x06.o: in function `edt_ft5x06_ts_probe':
edt-ft5x06.c:1154: undefined reference to `__regmap_init_i2c'
edt-ft5x06.o: in function `edt_ft5x06_ts_identify':
edt-ft5x06.c:897: undefined reference to `__regmap_init_i2c'
Make sure support for I2C regmap is actually selected by adding this
dependency to Kconfig.
Fixes: 9dfd9708ffba ("Input: edt-ft5x06 - convert to use regmap API")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/ZDRBExF1xmxalMZc@makrotopia.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver had the code to differentiate between finger and palm touches,
but did not use this information when reporting contacts. Change it so that
proper "tool" type is assigned to reported contacts.
Signed-off-by: JungHoon Hyun <hyunjunghoon@melfas.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It is pointless and expensive to calculate data in the interrupt that
depends on the type of touchscreen, which is detected on the driver
probe and cannot then be changed.
So calculate the size of the data buffer on the driver probe, as well as
the data retrieval command, and then use them in the ISR.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-10-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
With this patch, the CRC is always verified by the same function, even in
the case of accessing registers where the number of bytes is minimal.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-9-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In some parts of the code, error messages were improperly printed with
dev_dbg() calls. In those cases, dev_dbg() has been replaced with
dev_err().
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The use of the macros M06_REG_ADDR and M06_REG_CMD avoids code
duplication without impacting the application load, and reduces the
chances of errors or mistakes.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20230402200951.1032513-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a hard IRQ is triggered, the soft IRQ, which decides if an actual
pen down happened, should always be triggered. This enables the usage of
"can_sleep" GPIO chips as "pen down" GPIO, as the value is not read
during the hard IRQ anymore. This might be the case if the GPIO chip is
an expander behind i2c.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Link: https://lore.kernel.org/r/20230328-tsc2007-sleep-v5-1-fc55e76d0ced@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The input subsystem doesn't currently have any unit tests, let's add a
CONFIG_INPUT_KUNIT_TEST option that builds a test suite to be executed
with the KUnit test infrastructure.
For now, only three tests were added for some of the input core helper
functions that are trivial to test:
* input_test_polling: set/get poll interval and set-up a poll handler.
* input_test_timestamp: set/get input event timestamps.
* input_test_match_device_id: match a device by bus, vendor, product,
version and events capable of handling.
But having the minimal KUnit support allows to add more tests and suites
as follow-up changes. The tests can be run with the following command:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/input/tests/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Enric Balletbo i Serra <eballetbo@redhat.com>
config: powerpc-allnoconfig (https://download.01.org/0day-ci/archive/20230330/202303301815.kRKFM3NH-lkp@intel.com/config)
Link: https://lore.kernel.org/r/20230330081831.2291351-1-javierm@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a new driver for the Novatek i2c touchscreen controller as found
on the Acer Iconia One 7 B1-750 tablet. Unfortunately the touchscreen
controller model-number is unknown. Even with the tablet opened up it
is impossible to read the model-number.
Android calls this a "NVT-ts" touchscreen, but that may apply to other
Novatek controller models too.
This appears to be the same controller as the one supported by
https://github.com/advx9600/android/blob/master/touchscreen/NVTtouch_Android4.0/NVTtouch.c
but unfortunately that does not give us a model-number either.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20230326212308.55730-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and
Gamesir-G3w, require a specific packet that the first-party XInput driver sends
before it will start sending reports. It's not currently known what this packet
does, but since the first-party driver always sends it's unlikely that this
could cause issues with existing controllers.
Co-authored-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230324040446.3487725-3-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
They act that way in PC mode.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230324040446.3487725-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The list of specific VID/PID combinations for various controllers recently
added a new field "xtype". However, this field isn't used, nor filled in
the table itself, and was likely added by mistake and overlooked during
review. Since this field isn't used, it's safe to remove.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230225012147.276489-3-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If a platform driver's remove callback returns non-zero the driver core
emits an error message. In such a case however iqs62x_keys_remove()
already issued a (better) message. So return zero to suppress the
generic message.
This patch has no other side effects as platform_remove() ignores the
return value of .remove() after the warning.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230318225110.261439-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here). This
also fixes !CONFIG_OF error:
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312131514.351603-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here). This
also fixes !CONFIG_OF error:
drivers/input/touchscreen/sun4i-ts.c:392:34: error: ‘sun4i_ts_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230312131514.351603-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/input/keyboard/tm2-touchkey.c:335:34: error: ‘tm2_touchkey_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312131514.351603-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here). This
also fixes !CONFIG_OF error:
drivers/input/keyboard/st-keyscan.c:251:34: error: ‘keyscan_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312131514.351603-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144708.1542682-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144708.1542751-1-robh@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmQOYgweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHmIH/0DnvYzU4ppJec1s
s94ZbQ2TCKooWYsm9zqSU7TbwQkeLy2c43xx06ooItpMc8TCUDa+W+rmsUzPllxe
7zyx5DjxxRUL2+Y16fzk2+Y8vBUaqorjJv6F7V3muE7TKGdD7w1cbB+LcvylVUXB
iBZFWqNOrB0R4gVo4saXaX34uyrPuRXOpNGO/Yem/rI/xZPAC8O2fNA+YlAYCzDI
uJl4PXBx8zIokVY33fe4psski6ekeczIvjmsmSH75MSrJB5sGqT1+dQOme6PWj3R
gMzEgbPF/gk32VuojUE9mdE9C4hR2qULcz6GErQL4WqoKGh0Ck3mR7uRnGWSfNSG
kR1Kl7I=
=Hz45
-----END PGP SIGNATURE-----
Merge tag 'v6.3-rc2' into next
Merge with mainline to get of_property_present() and other newer APIs.
The HiDeep IST940E touchscreen controller used on the Lenovo Yoga Book X90F
convertible comes up in HID mode by default.
This works well on the X91F Windows model where the touchscreen is
correctly described in ACPI and ACPI takes care of controlling
the reset GPIO and regulators.
But the X90F ships with Android and the ACPI tables on this model don't
describe the touchscreen. Instead this is hardcoded in the vendor kernel.
The vendor kernel uses the touchscreen in native HiDeep 20 (2.0?) protocol
mode and switches the controller to this mode by writing 0 to reg 0x081e.
Adjusting the i2c-hid code to deal with the reset-gpio and regulators on
this non devicetree (but rather broken ACPI) convertible is somewhat tricky
and the native protocol reports ABS_MT_PRESSURE and ABS_MT_TOUCH_MAJOR
which are not reported in HID mode, so it is preferable to use the native
mode.
Add support to the hideep driver to reset the work-mode to the native
HiDeep protocol to allow using it on the Lenovo Yoga Book X90F.
This is guarded behind a new "hideep,force-native-protocol" boolean
property, to avoid changing behavior on other devices.
For the record: I did test using the i2c-hid driver with some quick hacks
and it does work. The I2C-HID descriptor is available from address 0x0020,
just like on the X91F Windows model.
So far the new "hideep,force-native-protocol" property is only used on
x86/ACPI (non devicetree) devs. IOW it is not used in actual devicetree
files. The devicetree-bindings maintainers have requested properties like
these to not be added to the devicetree-bindings, so the new property is
deliberately not added to the existing devicetree-bindings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230311114726.182789-3-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On some models the first HIDEEP_SYSCON_WDT_CON write alone is enough to
cause the controller to reset, causing the second write to fail:
i2c-hideep_ts: write to register 0x52000014 (0x000001) failed: -121
Switch this write to a raw hideep_pgm_w_mem() to avoid an error getting
logged in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230311114726.182789-2-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Turn the space into a tab to Eliminate the follow smatch warning:
drivers/input/touchscreen/hideep.c:470 hideep_program_nvm() warn:
inconsistent indenting
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220429070103.4747-1-yang.lee@linux.alibaba.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv
-----BEGIN PGP SIGNATURE-----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=p6Xp
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
- a set of tweaks to iqs269a touch controller driver
- a fix for ads7846 driver to properly handle 7845 chip
- cap11xx driver will support cap1203, cap1293 and cap1298 models
- xpad driver will support 8BitDo Pro 2 Wired Controller
- input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS()
and pm_sleep_ptr()
- other miscellaneous fixes and tweaks
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCY/hawQAKCRBAj56VGEWX
nJQwAP91B7gi9zPBmnRCYB/tsfUQy8x8yQmfIolpfRZJL0o3CQD+OBeSioXufJ2l
06KCnNY/DVf6ky+mJGdPC2KaU6AHyAA=
=94qv
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a set of tweaks to iqs269a touch controller driver
- a fix for ads7846 driver to properly handle 7845 chip
- cap11xx driver will support cap1203, cap1293 and cap1298 models
- xpad driver will support 8BitDo Pro 2 Wired Controller
- input drivers have been switched to DEFINE_SIMPLE_DEV_PM_OPS() and
pm_sleep_ptr()
- other miscellaneous fixes and tweaks
* tag 'input-for-v6.3-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (113 commits)
dt-bindings: input: iqs626a: Redefine trackpad property types
Input: iqs626a - drop unused device node references
dt-bindings: input: touchscreen: st,stmfts: convert to dtschema
Input: cyttsp5 - fix bitmask for touch buttons
Input: exc3000 - properly stop timer on shutdown
Input: synaptics-rmi4 - fix SPI device ID
Input: cap11xx - add support for cap1203, cap1293 and cap1298
dt-bindings: input: microchip,cap11xx: add cap1203, cap1293 and cap1298
Input: pmic8xxx-keypad - fix a Kconfig spelling mistake & hyphenation
Input: edt-ft5x06 - fix typo in a comment
Input: tegra-kbc - use devm_platform_get_and_ioremap_resource()
Input: st-keyscan - use devm_platform_get_and_ioremap_resource()
Input: spear-keyboard - use devm_platform_get_and_ioremap_resource()
Input: olpc_apsp - use devm_platform_get_and_ioremap_resource()
Input: arc_ps2 - use devm_platform_get_and_ioremap_resource()
Input: apbps2 - use devm_platform_get_and_ioremap_resource()
Input: altera_ps2 - use devm_platform_get_and_ioremap_resource()
Input: ads7846 - don't check penirq immediately for 7845
Input: ads7846 - always set last command to PWRDOWN
Input: ads7846 - don't report pressure for ads7845
...
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmPzgDgTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXrc7CACfG4SSd8KkWU/y8Q66Irxdau0a3ETD
KL4UNRKGIyKujufgFsme79O6xVSSsCNSay449wk20hqn8lnwbSRi9pUwmLn29hfd
CMFleWIqgwGFfC1do5DRF1vrt1siuG/jVE07mWsEwuY2iHx/es+H7LiQKidhkndZ
DhXRqoi7VYiJv5fRSumpkUJrMZiI96o9Mk09HUksdMwCn3+7RQEqHnlTH5KOozKF
iMroDB72iNw5Na/USZwWL2EDRptENam3lFkPBeDPqNw0SbG4g65JGPR9DSa0Lkbq
AGCJQkdU33mcYQG5MY7R4K1evufpOl/apqLW7h92j45Znr9ok6Vr2c1R
=J1VT
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- allow Linux to run as the nested root partition for Microsoft
Hypervisor (Jinank Jain and Nuno Das Neves)
- clean up the return type of callback functions (Dawei Li)
* tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Fix hv_get/set_register for nested bringup
Drivers: hv: Make remove callback of hyperv driver void returned
Drivers: hv: Enable vmbus driver for nested root partition
x86/hyperv: Add an interface to do nested hypercalls
Drivers: hv: Setup synic registers in case of nested root partition
x86/hyperv: Add support for detecting nested hypervisor
When CONFIG_PROC_FS is not set, one procfs-related function is not
used, causing a build error or warning.
Mark this function as __maybe_unused to quieten the build.
../drivers/input/misc/hp_sdc_rtc.c:268:12: warning: 'hp_sdc_rtc_proc_show' defined but not used [-Wunused-function]
268 | static int hp_sdc_rtc_proc_show(struct seq_file *m, void *v)
| ^~~~~~~~~~~~~~~~~~~~
Fixes: c18bd9a1ff47 ("hp_sdc_rtc: Don't use create_proc_read_entry()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230209010125.23690-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signal and a wakeup request input signal. It also
has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an
active-low PMIC enable (pmic_en_b) output.
Add the power key support for the ON/OFF button function found in
BBNSM module.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230215024117.3357341-2-ping.bai@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate subsystem
trees, but the majority is in the same branch, in order to better handle
dependencies between the patches and avoid breaking bisection.
Unfortunately that leads to merge conflicts against other changes in the
subsystem trees, but they should all be trivial to resolve by removing
the files.
See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed. The
only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users.
-----BEGIN PGP SIGNATURE-----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=WejQ
-----END PGP SIGNATURE-----
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.
Currently, the driver never calls fwnode_handle_put(); this patch
adds the missing calls. Because fwnode_handle_put() does not take
a const *fwnode_handle, the const qualifier is removed across all
corresponding *fwnode_handle instances.
As part of this change, trackpad channel touch thresholds and ATI
base values are now specified under single trackpad channel child
nodes. This enhancement moves both properties to scalar values as
opposed to arrays, making their types consistent across bindings.
Fixes: f1d2809de97a ("Input: Add support for Azoteq IQS626A")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Y9RQVe/V1Hnw1oly@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Prior to this patch, the bitmask ends up being 0x3, as opposed to 0x1
which likely was the intention. The erroneous bit results in the driver
reporting 2 different button activations in designs with 2 or more
buttons.
To detect which button has been pressed, cyttsp5_btn_attention() uses a
for loop to iterate through the input buffer, while shifting and
applying a bitmask to determine the state for each button.
Unfortunately, when the bitmask is 0x3 and there are multiple buttons,
this procedure falls apart.
Consider a design with 3 buttons. Pressing the third button will result
in a call to cyttsp5_btn_attention() with the input buffer containing
0x4 (binary 0100). In the first iteration of the for loop cur_btn_state
will be:
(0x4 >> 0 * 1) & 0x3 = 0x4 & 0x3 = 0x0
This is correct. However, in the next iteration this happens:
(0x4 >> 1 * 1) & 0x3 = 0x2 & 0x3 = 0x2
Which means that a key event for key 1 is generated, even though it's
not really active. In the third iteration, the loop detects the button
that was actually pressed:
(0x4 >> 2 * 1) & 0x3 = 0x1 & 0x3 = 0x1
This key event is the only one that should have been detected, but it is
accompanied by the preceding key. Ensuring the applied mask is 0x1
solves this problem.
Signed-off-by: Richard Kjerstadius <richard.kjerstadius@teledyne.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20230127102903.3317089-1-richard.kjerstadius@teledyne.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We need to stop the timer on driver unbind or probe failures, otherwise
we get UAF/Oops.
Fixes: 7e577a17f2ee ("Input: add I2C attached EETI EXC3000 multi touch driver")
Reported-by: "Stahl, Michael" <mstahl@moba.de>
Link: https://lore.kernel.org/r/Y9dK57BFqtlf8NmN@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Currently, the ID being set to "rmi4_spi" causes this warning:
"SPI driver rmi4_spi has no spi_device_id for syna,rmi4-spi"
Change the ID to rmi4-spi to stop this warning.
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Link: https://lore.kernel.org/r/20221219133717.1638496-1-rayyan@ansari.sh
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add basic support for more CAP1xxx sensors.
All models from CAP1xxx family are register-compatible.
Some advanced features are not used and disabled by default.
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Signed-off-by: Jiri Valek - 2N <jiriv@axis.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20230111131111.475270-3-jiriv@axis.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ucb1400 MFD driver and its gpio and touchscreen child
drivers were only used on a few PXA machines that were unused
for a while and are now removed.
Removing these leaves the AC97 support as ALSA specific,
no other drivers are now connected through this interface.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Lee Jones <lee@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Marek Vasut <marex@denx.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The PXA zylonite platform was removed, so this driver has no
remaining users.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-input@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The pxa930 platform is getting removed and no upstream machine
ever defined a rotary keyboard device.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
