IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Adds a test for minimal jit_write_elf functionality.
Committer testing:
# perf test jit
61: Test jit_write_elf : Ok
#
# perf test -v jit
61: Test jit_write_elf :
--- start ---
test child forked, pid 10460
Writing jit code to: /tmp/perf-test-KqxURR
test child finished with 0
---- end ----
Test jit_write_elf: Ok
#
Committer notes:
Fix up the case where HAVE_JITDUMP is no defined.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20191126235913.41855-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Restructure event enabling/disabling to use affinity, which
minimizes the number of IPIs needed.
Before on a large test case with 94 CPUs:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
54.65 1.899986 22 84812 660 ioctl
after:
39.21 0.930451 10 84796 644 ioctl
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191121001522.180827-13-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Restructure event reading to use affinity to minimize the number of IPIs
needed.
Before on a large test case with 94 CPUs:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
3.16 0.106079 4 22082 read
After:
3.43 0.081295 3 22082 read
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191121001522.180827-11-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Restructure the event opening in perf stat to cycle through the events
by CPU after setting affinity to that CPU.
This eliminates IPI overhead in the perf API.
We have to loop through the CPU in the outter builtin-stat code instead
of leaving that to low level functions.
It has to change the weak group fallback strategy slightly. Since we
cannot easily undo the opens for other CPUs move the weak group retry to
a separate loop.
Before with a large test case with 94 CPUs:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
42.75 4.050910 67 60046 110 perf_event_open
After:
26.86 0.944396 16 58069 110 perf_event_open
(the number changes slightly because the weak group retries
work differently and the test case relies on weak groups)
Committer notes:
Added one of the hunks in a patch provided by Andi after I noticed that
the "event times" 'perf test' entry was segfaulting.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191121001522.180827-10-andi@firstfloor.org
Link: http://lore.kernel.org/lkml/20191127232657.GL84886@tassilo.jf.intel.com # Fix
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Closing a perf fd can also trigger an IPI to the target CPU.
Use the same affinity technique as we use for reading/enabling events to
closing to optimize the CPU transitions.
Before on a large test case with 94 CPUs:
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
32.56 3.085463 50 61483 close
After:
10.54 0.735704 11 61485 close
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191121001522.180827-8-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some common code that is needed to iterate over all events
in CPU order. Used in followon patches
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191121001522.180827-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel perf subsystem has to IPI to the target CPU for many
operations. On systems with many CPUs and when managing many events the
overhead can be dominated by lots of IPIs.
An alternative is to set up CPU affinity in the perf tool, then set up
all the events for that CPU, and then move on to the next CPU.
Add some affinity management infrastructure to enable such a model.
Used in followon patches.
Committer notes:
Use zfree() in some places, add missing stdbool.h header, some minor
coding style changes.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191121001522.180827-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pmu.c does a lot of redundant /sys accesses while parsing aliases
and probing for PMUs. On large systems with a lot of PMUs this
can get expensive (>2s):
% time seconds usecs/call calls errors syscall
------ ----------- ----------- --------- --------- ----------------
27.25 1.227847 8 160888 16976 openat
26.42 1.190481 7 164224 164077 stat
Add a cache to remember if specific file names exist or don't
exist, which eliminates most of this overhead.
Also optimize some stat() calls to be slightly cheaper access()
Resulting in:
0.18 0.004166 2 1851 305 open
0.08 0.001970 2 829 622 access
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191121001522.180827-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid breaking the build on arches where this is not wired up, at
least all the other features should be made available and when using
this specific routine, the "unknown" should point the user/developer to
the need to wire this up on this particular hardware architecture.
Detected in a container mipsel debian cross build environment, where it
shows up as:
In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2:
/usr/mipsel-linux-gnu/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
Also on mips64:
In file included from /usr/mips64-linux-gnuabi64/include/stdio.h:867,
from /git/linux/tools/perf/lib/include/perf/cpumap.h:6,
from util/session.c:13:
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_user__printf' at util/session.c:1139:3,
inlined from 'dump_sample' at util/session.c:1246:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'printf',
inlined from 'regs_dump__printf' at util/session.c:1103:3,
inlined from 'regs__printf' at util/session.c:1131:2,
inlined from 'regs_intr__printf' at util/session.c:1147:3,
inlined from 'dump_sample' at util/session.c:1249:3,
inlined from 'machines__deliver_event' at util/session.c:1421:3:
/usr/mips64-linux-gnuabi64/include/bits/stdio2.h:107:10: error: '%-5s' directive argument is null [-Werror=format-overflow=]
107 | return __printf_chk (__USE_FORTIFY_LEVEL - 1, __fmt, __va_arg_pack ());
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cross compiler details:
mips64-linux-gnuabi64-gcc (Debian 9.2.1-8) 9.2.1 20190909
Fixes: 2bcd355b71 ("perf tools: Add interface to arch registers sets")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-95wjyv4o65nuaeweq31t7l1s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more step in the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9ibtn3vua76f934t7woyf26w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Continuing the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-z8d14wrw393a0fbvmnk1bqd9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-61rra2wg392rhvdgw421wzpt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-foo95pyyp3bhocbt7yd8qrvq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One more step on the merge of 'struct maps' with 'struct map_groups'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-69vcr8pubpym90skxhmbwhiw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And pick the shortest name: 'struct maps'.
The split existed because we used to have two groups of maps, one for
functions and one for variables, but that only complicated things,
sometimes we needed to figure out what was at some address and then had
to first try it on the functions group and if that failed, fall back to
the variables one.
That split is long gone, so for quite a while we had only one struct
maps per struct map_groups, simplify things by combining those structs.
First patch is the minimum needed to merge both, follow up patches will
rename 'thread->mg' to 'thread->maps', etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hom6639ro7020o708trhxh59@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At some point those stopped being used, prune them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p2k98mj3ff2uk1z95sbl5r6e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At some point we may have needed that, not anymore.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hnao13231bsl7xml5wn8h4iu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 39b12f7812 ("perf tools: Make it possible to read object code from vmlinux")
the actual function was removed, but we forgot to remove the prototype,
fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-35yy50cgpcx8cjorluwd5j53@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to have it elsewhere.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8cw846pudpxo0xdkvi9qnvrh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An error may be in place when tracepoint_error is called, use
parse_events__handle_error to avoid a memory leak and to capture the
first and last error. Error detected by LLVM's libFuzzer using the
following event:
$ perf stat -e 'msr/event/,f:e'
event syntax error: 'msr/event/,f:e'
\___ can't access trace events
Error: No permissions to read /sys/kernel/debug/tracing/events/f/e
Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug/tracing/'
Initial error:
event syntax error: 'msr/event/,f:e'
\___ no value assigned for term
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20191120180925.21787-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a pr_warning message. Fix it.
Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191121092623.374896-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for dumping, queuing and decoding AUX area samples. Decoding
samples is the same as regular decoding, except in the case where there
are no timestamps, in which case buffers are decoded immediately before
the sample event.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Default config for a PMU is defined before selected events are parsed.
That allows the user-entered config to override the default config.
However that does not allow for changing the default config based on
other options.
For example, if the user chooses AUX area sampling mode, in the case of
Intel PT, the psb_period needs to be small for sampling, so there is a
need to set the default psb_period to 0 (2 KiB) in that case. However
that should not override a value set by the user. To allow for that,
when using default config, record which bits of config were changed by
the user.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add functions to queue AUX area samples in advance
(auxtrace_queue_data()) or individually (auxtrace_queues__add_sample())
or find out what queue a sample belongs on
(auxtrace_queues__sample_queue()).
auxtrace_queue_data() can also queue snapshot data which keeps snapshots
and samples ordered with respect to each other in case support for that
is desired.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
AUX area samples are not limited in how far back in time the sample
could start. Consequently samples must be queued in advance to allow for
time-ordered processing. To achieve that, add
perf_session__peek_events() that walks and peeks at all the events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for dumping AUX area samples i.e. via the perf script/report
-D (--dump-raw-trace) option.
Committer notes:
Add __maybe_unused to the two args for auxtrace__dump_auxtrace_sample()
for when we don't HAVE_AUXTRACE_SUPPORT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow individual events to be selected for AUX area sampling, add
aux-sample-size config term. attr.aux_sample_size is updated by
auxtrace_parse_sample_options() so that the existing validation will see
the value. Any event that has a non-zero aux_sample_size will cause AUX
area sampling to be configured, irrespective of the --aux-sample option.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for parsing and validating AUX area sample options. At
present, the only option is the sample size, but it is also necessary to
ensure that events are in a group with an AUX area event as the leader.
Committer note:
Add missing 'static inline' in front of auxtrace_parse_sample_options()
for when we don't HAVE_AUXTRACE_SUPPORT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evsel__find_pmu() so it can be used without forward
declaration.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Architectures are expected to know if AUX area sampling is supported by
the hardware. Add a function perf_can_aux_sample() which will determine
whether the kernel supports it.
Committer notes:
I reported that this message was taking place on a kernel without the
required bits:
# perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
Error:
The sys_perf_event_open() syscall returned with 7 (Argument list too long) for event (branch-misses:u).
/bin/dmesg | grep -i perf may provide additional information.
Adrian sent a patch addressing it, with this explanation:
----
perf_can_aux_sample_size() always returned true because it did not pass
the attribute size to sys_perf_event_open, nor correctly check the
return value and errno.
----
After applying it I get, later in the series, when --aux-sample is
added:
# perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
AUX area sampling is not supported by kernel
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add kernel AUX area sampling definitions, which brings perf_event.h into
line with the kernel version.
New sample type PERF_SAMPLE_AUX requests a sample of the AUX area
buffer. New perf_event_attr member 'aux_sample_size' specifies the
desired size of the sample.
Also add support for parsing samples containing AUX area data i.e.
PERF_SAMPLE_AUX.
Committer notes:
I squashed the first two patches in this series to avoid breaking
automatic bisection, i.e. after applying only the original first patch
in this series we would have:
# perf test -v parsing
26: Sample parsing :
--- start ---
test child forked, pid 17018
sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating
test child finished with -1
---- end ----
Sample parsing: FAILED!
#
With the two paches combined:
# perf test parsing
26: Sample parsing : Ok
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch supports jumping from tui total cycles view to symbol source
view.
For example,
perf record -b ./div
perf report --total-cycles
In total cycles view, we can select one entry and press 'a' or press
ENTER key to jump to symbol source view.
This patch also sets sort_order to NULL in cmd_report() which will use
the default branch sort order. The percent value in new annotate view
will be consistent with the percent in annotate view switched from perf
report (we observed the original percent gap with previous patches).
v2:
---
Fix the 'make NO_SLANG=1' error. (set __maybe_unused to
annotation_opts in block_hists_tui_browse()).
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191118140849.20714-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It would be nice if we could jump to the assembler/source view (like the
normal perf report) from total cycles view.
This patch moves the block_hists_tui_browse from block-info.c to
ui/browsers/hists.c in order to reuse some browser codes (i.e
do_annotate) for implementing new annotation view.
v2:
---
Fix the 'make NO_SLANG=1' error. (Change 'int block_hists_tui_browse()'
to 'static inline int block_hists_tui_browse()')
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191118140849.20714-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid termination of trace loading in case the last record in the
decompressed buffer partly resides in the following mmaped
PERF_RECORD_COMPRESSED record.
In this case NULL value returned by fetch_mmaped_event() means to
proceed to the next mmaped record then decompress it and load compressed
events.
The issue can be reproduced like this:
$ perf record -z -- some_long_running_workload
$ perf report --stdio -vv
decomp (B): 44519 to 163000
decomp (B): 48119 to 174800
decomp (B): 65527 to 131072
fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data?
Error:
failed to process sample
...
Testing:
71: Zstd perf.data compression/decompression : Ok
$ tools/perf/perf report -vv --stdio
decomp (B): 59593 to 262160
decomp (B): 4438 to 16512
decomp (B): 285 to 880
Looking at the vmlinux_path (8 entries long)
Using vmlinux for symbols
decomp (B): 57474 to 261248
prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data?
decomp (B): 25 to 32
decomp (B): 52 to 120
...
Fixes: 57fc032ad6 ("perf session: Avoid infinite loop when seeing invalid header.size")
Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And take it into account when looking up DSOs when we have the dso_id
fields obtained from somewhere, like from PERF_RECORD_MMAP2 records.
Instances of struct map pointing to the same DSO pathname but with
anything in dso_id different are in fact different DSOs, so better have
different 'struct dso' instances to reflect that. At some point we may
want to get copies of the contents of the different objects if we want
to do correct annotation or other analysis.
With this we get 'struct map' 24 bytes leaner:
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned:1; /* 40: 0 1 */
_Bool priv:1; /* 40: 1 1 */
/* XXX 6 bits hole, try to pack */
/* XXX 3 bytes hole, try to pack */
u32 prot; /* 44 4 */
u64 pgoff; /* 48 8 */
u64 reloc; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 (*map_ip)(struct map *, u64); /* 64 8 */
u64 (*unmap_ip)(struct map *, u64); /* 72 8 */
struct dso * dso; /* 80 8 */
refcount_t refcnt; /* 88 4 */
u32 flags; /* 92 4 */
/* size: 96, cachelines: 2, members: 13 */
/* sum members: 92, holes: 1, sum holes: 3 */
/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
/* forced alignments: 1 */
/* last cacheline: 32 bytes */
} __attribute__((__aligned__(8)));
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-g4hxxmraplo7wfjmk384mfsb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not used anywhere, nuke it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-teqz0eqcw43mnt7i3me44esw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it when doing DSO lookups using dso_ids.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-u2nr1oq03o0i29w2ay9jx03s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of the 4 fields, a step in the direction of moving this to
struct dso.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-gp5s1xgxacurmih5d1l94ymy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And this patch highlights where these fields are being used: in the sort
order where it uses it to compare maps and classify samples taking into
account not just the DSO, but those DSO id fields.
I think these should be used to differentiate DSOs with the same name
but different 'struct dso_id' fields, i.e. these fields should move to
'struct dso' and then be used as part of the key when doing lookups for
DSOs, in addition to the DSO name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8v5isitqy0dup47nnwkpc80f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trace a magic number as immediate value if the target variable is not
found at some probe points which is based on one probe event.
This feature is good for the case if you trace a source code line with
some local variables, which is compiled into several instructions and
some of the variables are optimized out on some instructions.
Even if so, with this feature, perf probe trace a magic number instead
of such disappeared variables and fold those probes on one event.
E.g. without this patch:
# perf probe -D "pud_page_vaddr pud"
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
p:probe/pud_page_vaddr _text+23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+23558082 pud=%ax:x64
p:probe/pud_page_vaddr _text+328373 pud=%r8:x64
p:probe/pud_page_vaddr _text+348448 pud=%bx:x64
p:probe/pud_page_vaddr _text+23816818 pud=%bx:x64
With this patch:
# perf probe -D "pud_page_vaddr pud" | head
spurious_kernel_fault is blacklisted function, skip it.
vmalloc_fault is blacklisted function, skip it.
p:probe/pud_page_vaddr _text+23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+149051 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+315926 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23807209 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+23557365 pud=%ax:x64
p:probe/pud_page_vaddr _text+314097 pud=%di:x64
p:probe/pud_page_vaddr _text+314015 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+313893 pud=\deade12d:x64
p:probe/pud_page_vaddr _text+324083 pud=\deade12d:x64
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476931.24476.6261475888681844285.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support DW_AT_const_value for variable assignment instead of location.
Note that this requires ftrace supporting immediate value.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476012.24476.16096289871757175775.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support multiprobe event if the event is based on function and lines and
kernel supports it. In this case, perf probe creates the first probe
with an event, and tries to append following probes on that event, since
those probes must be on the same source code line.
Before this patch;
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
#
After this patch (on multiprobe supported kernel)
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18 -aR sleep 1
#
Committer testing:
On a kernel that doesn't support multiprobe events, after this patch:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
# grep append /sys/kernel/debug/tracing/README
be modified by appending '.descending' or '.ascending' to a
can be modified by appending any of the following modifiers
#
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
# perf probe -l
probe:vfs_read_L18 (on vfs_read:18@fs/read_write.c)
probe:vfs_read_L18_1 (on vfs_read:18@fs/read_write.c)
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406475010.24476.586290752591512351.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Generate event name from function name with line number as
<function>_L<line_number>. Note that this is only for the new event
which is defined by the line number of function (except for line 0).
If there is another event on same line, you have to use
"-f" option. In that case, the new event has "_1" suffix.
e.g.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read_L2 (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read_L2 -aR sleep 1
But if we omit the line number or 0th line, it will
have no suffix.
# perf probe -a kernel_read:0
Added new event:
probe:kernel_read (on kernel_read)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
probe:kernel_read (on kernel_read@linux-5.0.0/fs/read_write.c)
probe:kernel_read_L2 (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406474026.24476.2828897745502059569.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since perf probe -L shows non representive lines, it can be mislead
users where user can put probes. This prevents to show such non
representive lines so that user can understand which lines user can
probe.
# perf probe -L kernel_read
<kernel_read@/build/linux-pvZVvI/linux-5.0.0/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(get_ds());
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
Committer testing:
Before:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
1 {
2 mm_segment_t old_fs;
3 ssize_t result;
5 old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
See the 1, 3, 5 lines? They shouldn't be there, after this patch:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406473064.24476.2913278267727587314.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Verify user given probe line is a representive line (which doesn't share
the address with other lines or the line is the least line among the
lines which shares same address), and if not, it shows what is the
representive line.
Without this fix, user can put a probe on the lines which is not a a
representive line. But since this is not a representive line, perf probe
-l shows a representive line number instead of user given line number.
e.g. (put kernel_read:3, but listed as kernel_read:2)
# perf probe -a kernel_read:3
Added new event:
probe:kernel_read (on kernel_read:3)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
With this fix, perf probe doesn't allow user to put a probe on a
representive line, and tell what is the representive line.
# perf probe -a kernel_read:3
This line is sharing the addrees with other lines.
Please try to probe at kernel_read:2 instead.
Error: Failed to add events.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406472071.24476.14915451439785001021.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dwarf_getsrc_die() can return the line which is not a statement nor
the least line number among the lines which shares same address.
This can lead perf probe --list shows incorrect line number for probed
address.
To fix this, this introduces cu_getsrc_die() which returns only a
statement line and which is the least line number (we call it the
representive line for an address), and use it in cu_find_lineinfo().
Also, if the given address is the entry address of a real function,
cu_find_lineinfo() returns the function declared line number instead of
the start line number of the function body.
For example, without this change perf probe -l shows incorrect line as
below.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:1@linux-5.0.0/fs/read_write.c)
With this fix, it shows correct line number as below;
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406471067.24476.17463149618465494448.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
