21 Commits

Author SHA1 Message Date
Christophe Leroy
c119565a15 powerpc/603: Fix protection of user pages mapped with PROT_NONE
On book3s/32, page protection is defined by the PP bits in the PTE
which provide the following protection depending on the access
keys defined in the matching segment register:
- PP 00 means RW with key 0 and N/A with key 1.
- PP 01 means RW with key 0 and RO with key 1.
- PP 10 means RW with both key 0 and key 1.
- PP 11 means RO with both key 0 and key 1.

Since the implementation of kernel userspace access protection,
PP bits have been set as follows:
- PP00 for pages without _PAGE_USER
- PP01 for pages with _PAGE_USER and _PAGE_RW
- PP11 for pages with _PAGE_USER and without _PAGE_RW

For kernelspace segments, kernel accesses are performed with key 0
and user accesses are performed with key 1. As PP00 is used for
non _PAGE_USER pages, user can't access kernel pages not flagged
_PAGE_USER while kernel can.

For userspace segments, both kernel and user accesses are performed
with key 0, therefore pages not flagged _PAGE_USER are still
accessible to the user.

This shouldn't be an issue, because userspace is expected to be
accessible to the user. But unlike most other architectures, powerpc
implements PROT_NONE protection by removing _PAGE_USER flag instead of
flagging the page as not valid. This means that pages in userspace
that are not flagged _PAGE_USER shall remain inaccessible.

To get the expected behaviour, just mimic other architectures in the
TLB miss handler by checking _PAGE_USER permission on userspace
accesses as if it was the _PAGE_PRESENT bit.

Note that this problem only is only for 603 cores. The 604+ have
an hash table, and hash_page() function already implement the
verification of _PAGE_USER permission on userspace pages.

Fixes: f342adca3afc ("powerpc/32s: Prepare Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Christoph Plattner <christoph.plattner@thalesgroup.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4a0c6e3bb8f0c162457bf54d9bc6fd8d7b55129f.1612160907.git.christophe.leroy@csgroup.eu
2021-03-01 12:33:31 +11:00
Linus Torvalds
b12b472496 powerpc updates for 5.12
A large series adding wrappers for our interrupt handlers, so that irq/nmi/user
 tracking can be isolated in the wrappers rather than spread in each handler.
 
 Conversion of the 32-bit syscall handling into C.
 
 A series from Nick to streamline our TLB flushing when using the Radix MMU.
 
 Switch to using queued spinlocks by default for 64-bit server CPUs.
 
 A rework of our PCI probing so that it happens later in boot, when more generic
 infrastructure is available.
 
 Two small fixes to allow 32-bit little-endian processes to run on 64-bit
 kernels.
 
 Other smaller features, fixes & cleanups.
 
 Thanks to:
   Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira
   Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy,
   Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh
   Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus
   Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
   O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan
   Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, Zheng
   Yongjun.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmAzMagTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgAbBD/wMS2g1Q9oAGZPsx2NGd2RoeAauGxUs
 Yj6cZVmR+oa6sJyFYgEG7dT7tcwJITQxLBD3HpsHSnJ/rLrMloE33+cZNA9c4STz
 0mlzm3R7M5pOgcEqZglsgLP0RQeUuHSSF01g0kf1N3r+HYtmbmPjuUIl8CnAjlbT
 iMD2ZN2p8/r3kDDht0iBO534HUpsqhc00duSZgQhsV/PR7ZWVxoPk7PEJeo4vXlJ
 77986F7J5NLUTjMiLv5lTx49FcPbRd7a1jubsBtahJrwXj2GVvuy2i86G7HY+a+B
 eSxN7zJQgaFeLo0YPo7fZLBI0MAsIQt3nnZhKX0TMglbv/K8Aq64xiJqsVQdJ883
 CeEt0HvSJhsSC0C4O595NEINfDhDd+5IeSF9MvsujYXiUKRXtRkm1EPuAzTcZIzW
 NwkCLRo33NMXa+khMKaiqF/g7INayPUXoWESx75NXFsuNfcORvstkeUuEoi5GwJo
 TSlmosFqwRjghQ8eTLZuWBzmh3EpPGdtC4gm6D+lbzhzjah5c/1whyuLqra275kK
 E3Qt0/V0ixKyvlG7MI5yYh3L7+R/hrsflH7xIJJxZp2DW6mwBJzQYmkxDbSS8PzK
 nWien2XgpIQhSFat3QqreEFSfNkzdN2MClVi2Y1hpAgi+2Zm9rPdPNGcQI+DSOsB
 kpJkjOjWNJU/PQ==
 =dB2S
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - A large series adding wrappers for our interrupt handlers, so that
   irq/nmi/user tracking can be isolated in the wrappers rather than
   spread in each handler.

 - Conversion of the 32-bit syscall handling into C.

 - A series from Nick to streamline our TLB flushing when using the
   Radix MMU.

 - Switch to using queued spinlocks by default for 64-bit server CPUs.

 - A rework of our PCI probing so that it happens later in boot, when
   more generic infrastructure is available.

 - Two small fixes to allow 32-bit little-endian processes to run on
   64-bit kernels.

 - Other smaller features, fixes & cleanups.

Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang
Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian
Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong,
Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu,
Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen
Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun.

* tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits)
  powerpc/perf: Adds support for programming of Thresholding in P10
  powerpc/pci: Remove unimplemented prototypes
  powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user()
  powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size()
  powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user()
  powerpc/64: Fix stack trace not displaying final frame
  powerpc/time: Remove get_tbl()
  powerpc/time: Avoid using get_tbl()
  spi: mpc52xx: Avoid using get_tbl()
  powerpc/syscall: Avoid storing 'current' in another pointer
  powerpc/32: Handle bookE debugging in C in syscall entry/exit
  powerpc/syscall: Do not check unsupported scv vector on PPC32
  powerpc/32: Remove the counter in global_dbcr0
  powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry
  powerpc/syscall: implement system call entry/exit logic in C for PPC32
  powerpc/32: Always save non volatile GPRs at syscall entry
  powerpc/syscall: Change condition to check MSR_RI
  powerpc/syscall: Save r3 in regs->orig_r3
  powerpc/syscall: Use is_compat_task()
  powerpc/syscall: Make interrupt.c buildable on PPC32
  ...
2021-02-22 14:34:00 -08:00
Christophe Leroy
3642eb2125 powerpc/32: Preserve cr1 in exception prolog stack check to fix build error
THREAD_ALIGN_SHIFT = THREAD_SHIFT + 1 = PAGE_SHIFT + 1
Maximum PAGE_SHIFT is 18 for 256k pages so
THREAD_ALIGN_SHIFT is 19 at the maximum.

No need to clobber cr1, it can be preserved when moving r1
into CR when we check stack overflow.

This reduces the number of instructions in Machine Check Exception
prolog and fixes a build failure reported by the kernel test robot
on v5.10 stable when building with RTAS + VMAP_STACK + KVM. That
build failure is due to too many instructions in the prolog hence
not fitting between 0x200 and 0x300. Allthough the problem doesn't
show up in mainline, it is still worth the change.

Fixes: 98bf2d3f4970 ("powerpc/32s: Fix RTAS machine check with VMAP stack")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5ae4d545e3ac58e133d2599e0deb88843cb494fc.1612768623.git.christophe.leroy@csgroup.eu
2021-02-11 23:35:06 +11:00
Nicholas Piggin
6c6aee009e powerpc: add and use unknown_async_exception
This is currently the same as unknown_exception, but it will diverge
after interrupt wrappers are added and code moved out of asm into the
wrappers (e.g., async handlers will check FINISH_NAP).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-22-npiggin@gmail.com
2021-02-09 00:02:11 +11:00
Nicholas Piggin
a01a3f2ddb powerpc: remove arguments from fault handler functions
Make mm fault handlers all just take the pt_regs * argument and load
DAR/DSISR from that. Make those that return a value return long.

This is done to make the function signatures match other handlers, which
will help with a future patch to add wrappers. Explicit arguments could
be added for performance but that would require more wrapper macro
variants.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-7-npiggin@gmail.com
2021-02-09 00:02:08 +11:00
Christophe Leroy
7a24ae2e17 powerpc/32s: move DABR match out of handle_page_fault
handle_page_fault() has some code dedicated to book3s/32 to
call do_break() when the DSI is a DABR match.

On other platforms, do_break() is handled separately.

Do the same for book3s/32, do it earlier in the process of DSI.

This change also avoid doing the test on ISI.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-4-npiggin@gmail.com
2021-02-09 00:02:08 +11:00
Christophe Leroy
259149cf7c powerpc/32s: Only build hash code when CONFIG_PPC_BOOK3S_604 is selected
It is now possible to only build book3s/32 kernel for
CPUs without hash table.

Opt out hash related code when CONFIG_PPC_BOOK3S_604 is not selected.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62df436454ef06e104cc334a0859a2878d7888d5.1608274548.git.christophe.leroy@csgroup.eu
2021-01-31 22:35:50 +11:00
Christophe Leroy
98bf2d3f49 powerpc/32s: Fix RTAS machine check with VMAP stack
When we have VMAP stack, exception prolog 1 sets r1, not r11.

When it is not an RTAS machine check, don't trash r1 because it is
needed by prolog 1.

Fixes: da7bb43ab9da ("powerpc/32: Fix vmap stack - Properly set r1 before activating MMU")
Fixes: d2e006036082 ("powerpc/32: Use SPRN_SPRG_SCRATCH2 in exception prologs")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Squash in fixup for RTAS machine check from Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bc77d61d1c18940e456a2dee464f1e2eda65a3f0.1608621048.git.christophe.leroy@csgroup.eu
2021-01-04 23:59:25 +11:00
Christophe Leroy
1b03e71ff6 powerpc/32s: Handle PROTFAULT in hash_page() also for CONFIG_PPC_KUAP
On hash 32 bits, handling minor protection faults like unsetting
dirty flag is heavy if done from the normal page_fault processing,
because it implies hash table software lookup for flushing the entry
and then a DSI is taken anyway to add the entry back.

When KUAP was implemented, as explained in commit a68c31fc01ef
("powerpc/32s: Implement Kernel Userspace Access Protection"),
protection faults has been diverted from hash_page() because
hash_page() was not able to identify a KUAP fault.

Implement KUAP verification in hash_page(), by clearing write
permission when the access is a kernel access and Ks is 1.
This works regardless of the address because kernel segments always
have Ks set to 0 while user segments have Ks set to 0 only
when kernel write to userspace is granted.

Then protection faults can be handled by hash_page() even for KUAP.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8a4ffe4798e9ea32aaaccdf85e411bb1beed3500.1605542955.git.christophe.leroy@csgroup.eu
2020-12-09 16:59:46 +11:00
Christophe Leroy
4b74a35fc7 powerpc/32s: Make Hash var static
Hash var is used only locally in mmu.c now.

No need to set it in head_32.S anymore.

Make it static and initialises it to the early hash table.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/786c82a89cdfdaabb32b72a44f7c312fa81d192b.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09 16:46:54 +11:00
Christophe Leroy
de1cd07906 powerpc/32s: Use SPRN_SPRG_SCRATCH2 in DSI prolog
Use SPRN_SPRG_SCRATCH2 as an alternative scratch register in
the early part of DSI prolog in order to avoid clobbering
SPRN_SPRG_SCRATCH0/1 used by other prologs.

The 603 doesn't like a jump from DataLoadTLBMiss to the 10 nops
that are now in the beginning of DSI exception as a result of
the feature section. To workaround this, add a jump as alternative.
It also avoids fetching 10 nops for nothing.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f9f8df2a2be93568768ef1ac793639f7914cf103.1606285014.git.christophe.leroy@csgroup.eu
2020-12-04 01:01:32 +11:00
Christophe Leroy
c4a22611bf powerpc/603: Use SPRN_SDR1 to store the pgdir phys address
On the 603, SDR1 is not used.

In order to free SPRN_SPRG2, use SPRN_SDR1 to store the pgdir
phys addr.

But only some bits of SDR1 can be used (0xffff01ff).
As the pgdir is 4k aligned, rotate it by 4 bits to the left.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7370574b49d8476878ce5480726197993cb76108.1606285014.git.christophe.leroy@csgroup.eu
2020-12-04 01:01:31 +11:00
Christophe Leroy
7b107a71e7 powerpc/32s: Fix an FTR_SECTION_ELSE
An FTR_SECTION_ELSE is in the middle of
BEGIN_MMU_FTR_SECTION/ALT_MMU_FTR_SECTION_END_IFSET

Change it to MMU_FTR_SECTION_ELSE

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/61790f1a91692950a6bb5bb53d6d514d9bcdad74.1606285014.git.christophe.leroy@csgroup.eu
2020-12-04 01:01:31 +11:00
Christophe Leroy
035b19a15a powerpc/32s: Always map kernel text and rodata with BATs
Since commit 2b279c0348af ("powerpc/32s: Allow mapping with BATs with
DEBUG_PAGEALLOC"), there is no real situation where mapping without
BATs is required.

In order to simplify memory handling, always map kernel text
and rodata with BATs even when "nobats" kernel parameter is set.

Also fix the 603 TLB miss exceptions that don't require anymore
kernel page table if DEBUG_PAGEALLOC.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da51f7ec632825a4ce43290a904aad61648408c0.1606285013.git.christophe.leroy@csgroup.eu
2020-12-04 01:01:31 +11:00
Christophe Leroy
7d68c89169 powerpc/32s: Allow deselecting CONFIG_PPC_FPU on mpc832x
The e300c2 core which is embedded in mpc832x CPU doesn't have
an FPU.

Make it possible to not select CONFIG_PPC_FPU when building a
kernel dedicated to that target.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fcdc60d85baf80eaa0a7f3261d9d889282068216.1597770847.git.christophe.leroy@csgroup.eu
2020-12-04 01:01:12 +11:00
Michael Ellerman
20fa40b147 Merge branch 'fixes' into next
Merge our fixes branch, in particular to bring in the changes for the
entry/uaccess flush.
2020-11-25 23:17:31 +11:00
Christophe Leroy
120c0518ec powerpc: Replace RFI by rfi on book3s/32 and booke
For book3s/32 and for booke, RFI is just an rfi.
Only 40x has a non trivial RFI.
CONFIG_PPC_RTAS is never selected by 40x platforms.

Make it more explicit by replacing RFI by rfi wherever possible.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b901ddfdeb8a0a3b7cb59999599cdfde1bbfe834.1604854583.git.christophe.leroy@csgroup.eu
2020-11-19 16:56:54 +11:00
Christophe Leroy
01776f070f powerpc/32s: Use relocation offset when setting early hash table
When calling early_hash_table(), the kernel hasn't been yet
relocated to its linking address, so data must be addressed
with relocation offset.

Add relocation offset to write into Hash in early_hash_table().

Fixes: 69a1593abdbc ("powerpc/32s: Setup the early hash table at all time.")
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9e225a856a8b22e0e77587ee22ab7a2f5bca8753.1604740029.git.christophe.leroy@csgroup.eu
2020-11-08 20:38:05 +11:00
Christophe Leroy
11522448e6 powerpc/603: Always fault when _PAGE_ACCESSED is not set
The kernel expects pte_young() to work regardless of CONFIG_SWAP.

Make sure a minor fault is taken to set _PAGE_ACCESSED when it
is not already set, regardless of the selection of CONFIG_SWAP.

Fixes: 84de6ab0e904 ("powerpc/603: don't handle PAGE_ACCESSED in TLB miss handlers.")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a44367744de54e2315b2f1a8cbbd7f88488072e0.1602342806.git.christophe.leroy@csgroup.eu
2020-11-05 23:34:07 +11:00
Christophe Leroy
865418795a powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
head_book3s_32.S is only built when CONFIG_PPC_BOOK3S_32 is selected.

Remove all conditions based on CONFIG_PPC_BOOK3S_32 in the file.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1b68632425d8866d147aea9005004e4594672211.1601975100.git.christophe.leroy@csgroup.eu
2020-10-08 21:17:15 +11:00
Christophe Leroy
533090e5a9 powerpc/32s: Rename head_32.S to head_book3s_32.S
Unlike PPC64 which had a single head_64.S, PPC32 are multiple ones.
There is the head_32.S, selected by default based on the value of BITS
and overridden based on some CONFIG_ values. This leads to thinking
that it may be selected by different types of PPC32 platform but
indeed it ends up being selected by book3s/32 only.

Make that explicit by:
- Not doing any default selection based on BITS.
- Renaming head_32.S to head_book3s_32.S.
- Get head_book3s_32.S selected only by CONFIG_PPC_BOOK3S_32.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix head_$(BITS).o reference in arch/powerpc/Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/319d379f696412681c66a987cc75e6abf8f958d2.1601975100.git.christophe.leroy@csgroup.eu
2020-10-08 21:17:14 +11:00