linux

iv/linux

Fork 0

Commit Graph

Author	SHA1	Message	Date
Daniel Ritz	fa912bcb06	[PATCH] yenta TI: turn off interrupts during card power-on #2 - make boot-up card recognition more reliable (ie. redo interrogation always if there is no valid 'card inserted' state) (and yes, i saw it happening on an o2micro controller that both CB_CBARD and CB_16BITCARD bits were set at the same time) - also redo interrogation before probing the ISA interrupts. it's safer to do the probing with the socket in a clean state. - make card insert detect more reliable. yenta_get_status() now returns SS_PENDING as long as the card is not completley inserted and one of the voltage bits is set. also !CB_CBARD doesn't mean CB_16BITCARD. there is CB_NOTACARD as well, so make an explicit check for CB_16BITCARD. - for TI bridges: disable IRQs during power-on. in all-serial and tied interrupt mode the interrupts are always disabled for single-slot controllers. for two-slot contollers the disabling is only done when the other slot is empty. to force disabling there is a new module parameter now: pwr_irqs_off=Y (which is a regression for working setups. that's why it's an option, only use when required) - modparm to disable ISA interrupt probing (isa_probe, defaults to on) - remove unneeded code/cleanups (ie. merge yenta_events() into yenta_interrupts()) Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>	2005-06-23 09:45:31 -07:00
Daniel Ritz	c835a38896	[PATCH] pcmcia: yenta TI: align irq of func1 to func0 if INTRTIE is set Make sure that if the INTRTIE bit is set both functions of the cardbus bridge use the same IRQ before doing any probing... [ yes i hate the TI bridges for the fact that they are very flexible so that so many BIOS vendors get it wrong. ] Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>	2005-05-05 16:36:43 -07:00
Linus Torvalds	1da177e4c3	Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!	2005-04-16 15:20:36 -07:00

Author

SHA1

Message

Date

Daniel Ritz

fa912bcb06

[PATCH] yenta TI: turn off interrupts during card power-on #2

- make boot-up card recognition more reliable (ie.  redo interrogation
  always if there is no valid 'card inserted' state) (and yes, i saw it
  happening on an o2micro controller that both CB_CBARD and CB_16BITCARD
  bits were set at the same time)

- also redo interrogation before probing the ISA interrupts.  it's safer
  to do the probing with the socket in a clean state.

- make card insert detect more reliable.  yenta_get_status() now returns
  SS_PENDING as long as the card is not completley inserted and one of the
  voltage bits is set.  also !CB_CBARD doesn't mean CB_16BITCARD.  there is
  CB_NOTACARD as well, so make an explicit check for CB_16BITCARD.

- for TI bridges: disable IRQs during power-on.  in all-serial and tied
  interrupt mode the interrupts are always disabled for single-slot
  controllers.  for two-slot contollers the disabling is only done when the
  other slot is empty.  to force disabling there is a new module parameter
  now: pwr_irqs_off=Y (which is a regression for working setups.  that's
  why it's an option, only use when required)

- modparm to disable ISA interrupt probing (isa_probe, defaults to on)

- remove unneeded code/cleanups (ie.  merge yenta_events() into
  yenta_interrupts())

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-06-23 09:45:31 -07:00

Daniel Ritz

c835a38896

[PATCH] pcmcia: yenta TI: align irq of func1 to func0 if INTRTIE is set

Make sure that if the INTRTIE bit is set both functions of the cardbus
bridge use the same IRQ before doing any probing...

[ yes i hate the TI bridges for the fact that they are very flexible
  so that so many BIOS vendors get it wrong. ]

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

2005-05-05 16:36:43 -07:00

Linus Torvalds

1da177e4c3

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

2005-04-16 15:20:36 -07:00

3 Commits