IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This file uses the clk API so it should include clk.h directly
instead of indirectly including it through clk-provider.h.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
I hadn't had enough coffee when I wrote this. Currently, the final
increment of buf depends on the value loaded from the table, and
causes gcc to emit a cmov immediately before the return. It is smarter
to let it depend on r, since the increment can then be computed in
parallel with the final load/store pair. It also shaves 16 bytes of
.text.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The most expensive part of decimal conversion is the divisions by 10
(albeit done using reciprocal multiplication with appropriately chosen
constants). I decided to see if one could eliminate around half of
these multiplications by emitting two digits at a time, at the cost of a
200 byte lookup table, and it does indeed seem like there is something
to be gained, especially on 64 bits. Microbenchmarking shows
improvements ranging from -50% (for numbers uniformly distributed in [0,
2^64-1]) to -25% (for numbers heavily biased toward the smaller end, a
more realistic distribution).
On a larger scale, perf shows that top, one of the big consumers of /proc
data, uses 0.5-1.0% fewer cpu cycles.
I had to jump through some hoops to get the 32 bit code to compile and run
on my 64 bit machine, so I'm not sure how relevant these numbers are, but
just for comparison the microbenchmark showed improvements between -30%
and -10%.
The bloat-o-meter costs are around 150 bytes (the generated code is a
little smaller, so it's not the full 200 bytes) on both 32 and 64 bit.
I'm aware that extra cache misses won't show up in a microbenchmark as
used above, but on the other hand decimal conversions often happen in bulk
(for example in the case of top).
I have of course tested that the new code generates the same output as the
old, for both the first and last 1e10 numbers in [0,2^64-1] and 4e9
'random' numbers in-between.
Test and verification code on github: https://github.com/Villemoes/dec.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Tested-by: Jeff Epler <jepler@unpythonic.net>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current semantics of string_escape_mem are inadequate for one of its
current users, vsnprintf(). If that is to honour its contract, it must
know how much space would be needed for the entire escaped buffer, and
string_escape_mem provides no way of obtaining that (short of allocating a
large enough buffer (~4 times input string) to let it play with, and
that's definitely a big no-no inside vsnprintf).
So change the semantics for string_escape_mem to be more snprintf-like:
Return the size of the output that would be generated if the destination
buffer was big enough, but of course still only write to the part of dst
it is allowed to, and (contrary to snprintf) don't do '\0'-termination.
It is then up to the caller to detect whether output was truncated and to
append a '\0' if desired. Also, we must output partial escape sequences,
otherwise a call such as snprintf(buf, 3, "%1pE", "\123") would cause
printf to write a \0 to buf[2] but leaving buf[0] and buf[1] with whatever
they previously contained.
This also fixes a bug in the escaped_string() helper function, which used
to unconditionally pass a length of "end-buf" to string_escape_mem();
since the latter doesn't check osz for being insanely large, it would
happily write to dst. For example, kasprintf(GFP_KERNEL, "something and
then %pE", ...); is an easy way to trigger an oops.
In test-string_helpers.c, the -ENOMEM test is replaced with testing for
getting the expected return value even if the buffer is too small. We
also ensure that nothing is written (by relying on a NULL pointer deref)
if the output size is 0 by passing NULL - this has to work for
kasprintf("%pE") to work.
In net/sunrpc/cache.c, I think qword_add still has the same semantics.
Someone should definitely double-check this.
In fs/proc/array.c, I made the minimum possible change, but longer-term it
should stop poking around in seq_file internals.
[andriy.shevchenko@linux.intel.com: simplify qword_add]
[andriy.shevchenko@linux.intel.com: add missed curly braces]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The helper hex_string() is broken in two ways. First, it doesn't
increment buf regardless of whether there is room to print, so callers
such as kasprintf() that try to probe the correct storage to allocate will
get a too small return value. But even worse, kasprintf() (and likely
anyone else trying to find the size of the result) pass NULL for buf and 0
for size, so we also have end == NULL. But this means that the end-1 in
hex_string() is (char*)-1, so buf < end-1 is true and we get a NULL
pointer deref. I double-checked this with a trivial kernel module that
just did a kasprintf(GFP_KERNEL, "%14ph", "CrashBoomBang").
Nobody seems to be using %ph with kasprintf, but we might as well fix it
before it hits someone.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add format specifiers for printing struct clk:
- '%pC' or '%pCn': name (Common Clock Framework) or address (legacy
clock framework) of the clock,
- '%pCr': rate of the clock.
[akpm@linux-foundation.org: omit code if !CONFIG_HAVE_CLK]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Making ZEROPAD == '0'-' ', we can eliminate a few more instructions.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc doesn't merge or overlap const char[] objects with identical contents
(probably language lawyers would also insist that these things have
different addresses), but there's no reason to have the string
"0123456789ABCDEF" occur in multiple places. hex_asc_upper is declared in
kernel.h and defined in lib/hexdump.c, which is unconditionally compiled
in.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At least since the initial git commit, when base was passed as a separate
parameter, number() has only been called with bases 8, 10 and 16. I'm
guessing that 66 was to accommodate 64 0/1, a sign and a '\0', but the
buffer is only used for the actual digits. Octal digits carry 3 bits of
information, so 24 is enough. Spell that 3*sizeof(num) so one less place
needs to be changed should long long ever be 128 bits. Also remove the
commented-out code that would handle an arbitrary base.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since FORMAT_TYPE_INT is simply 1 more than FORMAT_TYPE_UINT, and
similarly for BYTE/UBYTE, SHORT/USHORT, LONG/ULONG, we can eliminate a few
instructions by making SIGN have the value 1 instead of 2, and then use
arithmetic instead of branches for computing the right spec->type. It's a
little hacky, but certainly in the same spirit as SMALL needing to have
the value 0x20. For example for the spec->qualifier == 'l' case, gcc now
generates
75e: 0f b6 53 01 movzbl 0x1(%rbx),%edx
762: 83 e2 01 and $0x1,%edx
765: 83 c2 09 add $0x9,%edx
768: 88 13 mov %dl,(%rbx)
instead of
763: 0f b6 53 01 movzbl 0x1(%rbx),%edx
767: 83 e2 02 and $0x2,%edx
76a: 80 fa 01 cmp $0x1,%dl
76d: 19 d2 sbb %edx,%edx
76f: 83 c2 0a add $0xa,%edx
772: 88 13 mov %dl,(%rbx)
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bitmap and its derivatives such as cpumask and nodemask currently only
provide formatting functions which put the output string into the
provided buffer; however, how long this buffer should be isn't defined
anywhere and given that some of these bitmaps can be too large to be
formatted into an on-stack buffer it users sometimes are unnecessarily
forced to come up with creative solutions and compromises for the
buffer just to printk these bitmaps.
There have been a couple different attempts at making this easier.
1. Way back, PeterZ tried printk '%pb' extension with the precision
for bit width - '%.*pb'. This was intuitive and made sense but
unfortunately triggered a compile warning about using precision
for a pointer.
http://lkml.kernel.org/g/1336577562.2527.58.camel@twins
2. I implemented bitmap_pr_cont[_list]() and its wrappers for cpumask
and nodemask. This works but PeterZ pointed out that pr_cont's
tendency to produce broken lines when multiple CPUs are printing is
bothering considering the usages.
http://lkml.kernel.org/g/1418226774-30215-3-git-send-email-tj@kernel.org
So, this patch is another attempt at teaching printk and friends how
to print bitmaps. It's almost identical to what PeterZ tried with
precision but it uses the field width for the number of bits instead
of precision. The format used is '%*pb[l]', with the optional
trailing 'l' specifying list format instead of hex masks.
This is a valid format string and doesn't trigger compiler warnings;
however, it does make it impossible to specify output field width when
printing bitmaps. I think this is an acceptable trade-off given how
much easier it makes printing bitmaps and that we don't have any
in-kernel user which is using the field width specification. If any
future user wants to use field width with a bitmap, it'd have to
format the bitmap into a string buffer and then print that buffer with
width spec, which isn't different from how it should be done now.
This patch implements bitmap[_list]_string() which are called from the
vsprintf pointer() formatting function. The implementation is mostly
identical to bitmap_scn[list]printf() except that the output is
performed in the vsprintf way. These functions handle formatting into
too small buffers and sprintf() family of functions report the correct
overrun output length.
bitmap_scn[list]printf() are now thin wrappers around scnprintf().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All callers of skip_atoi have already checked for the first character
being a digit. In this case, gcc generates simpler code for a do
while-loop.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On 64 bit, size may very well be huge even if bit 31 happens to be 0.
Somehow it doesn't feel right that one can pass a 5 GiB buffer but not a
3 GiB one. So cap at INT_MAX as was probably the intention all along.
This is also the made-up value passed by sprintf and vsprintf.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It seems a little simpler to consume the p from a %p specifier in
format_decode, just as it is done for the surrounding %c, %s and %% cases.
While there, delete a redundant and misplaced comment.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allows user to print a given buffer as an escaped string. The
rules are applied according to an optional mix of flags provided by
additional format letters.
For example, if the given buffer is:
1b 62 20 5c 43 07 22 90 0d 5d
The result strings would be:
%*pE "\eb \C\a"\220\r]"
%*pEhp "\x1bb \C\x07"\x90\x0d]"
%*pEa "\e\142\040\\\103\a\042\220\r\135"
Please, read Documentation/printk-formats.txt and lib/string_helpers.c
kernel documentation to get further information.
[akpm@linux-foundation.org: tidy up comment layout, per Joe]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Joe Perches <joe@perches.com>
Cc: "John W . Linville" <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fix spelling typo found in DocBook/kernel-api.xml.
It is because the file is generated from the source comments,
I have to fix the comments in source codes.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixing 2 coccinelle warnings:
lib/vsprintf.c:2350:2-9: WARNING: Assignment of bool to 0/1
lib/vsprintf.c:2389:3-10: WARNING: Assignment of bool to 0/1
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All in-kernel users of %n in format strings have now been removed and
the %n directive is ignored. Remove the handling of %n so that it is
treated the same as any other invalid format string directive. Keep a
warning in place to deter new instances of %n in format strings.
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sometimes we have a struct resource where we know the type (MEM/IO/etc.)
and the size, but we haven't assigned address space for it. The
IORESOURCE_UNSET flag is a way to indicate this situation. For these
"unset" resources, the start address is meaningless, so print only the
size, e.g.,
- pci 0000:0c:00.0: reg 184: [mem 0x00000000-0x00001fff 64bit]
+ pci 0000:0c:00.0: reg 184: [mem size 0x2000 64bit]
For %pr (printing with raw flags), we still print the address range,
because %pr is mostly used for debugging anyway.
Thanks to Fengguang Wu <fengguang.wu@intel.com> for suggesting
resource_size().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
dma_addr_t's can be either u32 or u64 depending on a CONFIG option.
There are a few hundred dma_addr_t's printed via either cast to unsigned
long long, unsigned long or no cast at all.
Add %pad to be able to emit them without the cast.
Update Documentation/printk-formats.txt too.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Shevchenko, Andriy" <andriy.shevchenko@intel.com>
Cc: Rob Landley <rob@landley.net>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This ignores %n in printf again, as was originally documented.
Implementing %n poses a greater security risk than utility, so it should
stay ignored. To help anyone attempting to use %n, a warning will be
emitted if it is encountered.
Based on an earlier patch by Joe Perches.
Because %n was designed to write to pointers on the stack, it has been
frequently used as an attack vector when bugs are found that leak
user-controlled strings into functions that ultimately process format
strings. While this class of bug can still be turned into an
information leak, removing %n eliminates the common method of elevating
such a bug into an arbitrary kernel memory writing primitive,
significantly reducing the danger of this class of bug.
For seq_file users that need to know the length of a written string for
padding, please see seq_setwidth() and seq_pad() instead.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Looks like these were added to Documentation/printk-formats.txt but
not the in-file table.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some setuid binaries will allow reading of files which have read
permission by the real user id. This is problematic with files which
use %pK because the file access permission is checked at open() time,
but the kptr_restrict setting is checked at read() time. If a setuid
binary opens a %pK file as an unprivileged user, and then elevates
permissions before reading the file, then kernel pointer values may be
leaked.
This happens for example with the setuid pppd application on Ubuntu 12.04:
$ head -1 /proc/kallsyms
00000000 T startup_32
$ pppd file /proc/kallsyms
pppd: In file /proc/kallsyms: unrecognized option 'c1000000'
This will only leak the pointer value from the first line, but other
setuid binaries may leak more information.
Fix this by adding a check that in addition to the current process having
CAP_SYSLOG, that effective user and group ids are equal to the real ids.
If a setuid binary reads the contents of a file which uses %pK then the
pointer values will be printed as NULL if the real user is unprivileged.
Update the sysctl documentation to reflect the changes, and also correct
the documentation to state the kptr_restrict=0 is the default.
This is a only temporary solution to the issue. The correct solution is
to do the permission check at open() time on files, and to replace %pK
with a function which checks the open() time permission. %pK uses in
printk should be removed since no sane permission check can be done, and
instead protected by using dmesg_restrict.
Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New formats: %p[dD][234]?. The next pointer is interpreted as struct dentry *
or struct file * resp. ('d' => dentry, 'D' => file) and the last component(s)
of pathname are printed (%pd => just the last one, %pd2 => the last two, etc.)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull networking updates from David Miller:
"This is a re-do of the net-next pull request for the current merge
window. The only difference from the one I made the other day is that
this has Eliezer's interface renames and the timeout handling changes
made based upon your feedback, as well as a few bug fixes that have
trickeled in.
Highlights:
1) Low latency device polling, eliminating the cost of interrupt
handling and context switches. Allows direct polling of a network
device from socket operations, such as recvmsg() and poll().
Currently ixgbe, mlx4, and bnx2x support this feature.
Full high level description, performance numbers, and design in
commit 0a4db187a9 ("Merge branch 'll_poll'")
From Eliezer Tamir.
2) With the routing cache removed, ip_check_mc_rcu() gets exercised
more than ever before in the case where we have lots of multicast
addresses. Use a hash table instead of a simple linked list, from
Eric Dumazet.
3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
Marek Puzyniak, Michal Kazior, and Sujith Manoharan.
4) Support reporting the TUN device persist flag to userspace, from
Pavel Emelyanov.
5) Allow controlling network device VF link state using netlink, from
Rony Efraim.
6) Support GRE tunneling in openvswitch, from Pravin B Shelar.
7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
Daniel Borkmann and Eric Dumazet.
8) Allow controlling of TCP quickack behavior on a per-route basis,
from Cong Wang.
9) Several bug fixes and improvements to vxlan from Stephen
Hemminger, Pravin B Shelar, and Mike Rapoport. In particular,
support receiving on multiple UDP ports.
10) Major cleanups, particular in the area of debugging and cookie
lifetime handline, to the SCTP protocol code. From Daniel
Borkmann.
11) Allow packets to cross network namespaces when traversing tunnel
devices. From Nicolas Dichtel.
12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
manner akin to how we monitor real network traffic via ptype_all.
From Daniel Borkmann.
13) Several bug fixes and improvements for the new alx device driver,
from Johannes Berg.
14) Fix scalability issues in the netem packet scheduler's time queue,
by using an rbtree. From Eric Dumazet.
15) Several bug fixes in TCP loss recovery handling, from Yuchung
Cheng.
16) Add support for GSO segmentation of MPLS packets, from Simon
Horman.
17) Make network notifiers have a real data type for the opaque
pointer that's passed into them. Use this to properly handle
network device flag changes in arp_netdev_event(). From Jiri
Pirko and Timo Teräs.
18) Convert several drivers over to module_pci_driver(), from Peter
Huewe.
19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
O(1) calculation instead. From Eric Dumazet.
20) Support setting of explicit tunnel peer addresses in ipv6, just
like ipv4. From Nicolas Dichtel.
21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.
22) Prevent a single high rate flow from overruning an individual cpu
during RX packet processing via selective flow shedding. From
Willem de Bruijn.
23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
Dumazet.
24) Don't just drop GSO packets which are above the TBF scheduler's
burst limit, chop them up so they are in-bounds instead. Also
from Eric Dumazet.
25) VLAN offloads are missed when configured on top of a bridge, fix
from Vlad Yasevich.
26) Support IPV6 in ping sockets. From Lorenzo Colitti.
27) Receive flow steering targets should be updated at poll() time
too, from David Majnemer.
28) Fix several corner case regressions in PMTU/redirect handling due
to the routing cache removal, from Timo Teräs.
29) We have to be mindful of ipv4 mapped ipv6 sockets in
upd_v6_push_pending_frames(). From Hannes Frederic Sowa.
30) Fix L2TP sequence number handling bugs, from James Chapman."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
drivers/net: caif: fix wrong rtnl_is_locked() usage
drivers/net: enic: release rtnl_lock on error-path
vhost-net: fix use-after-free in vhost_net_flush
net: mv643xx_eth: do not use port number as platform device id
net: sctp: confirm route during forward progress
virtio_net: fix race in RX VQ processing
virtio: support unlocked queue poll
net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
Documentation: Fix references to defunct linux-net@vger.kernel.org
net/fs: change busy poll time accounting
net: rename low latency sockets functions to busy poll
bridge: fix some kernel warning in multicast timer
sfc: Fix memory leak when discarding scattered packets
sit: fix tunnel update via netlink
dt:net:stmmac: Add dt specific phy reset callback support.
dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
dt:net:stmmac: Allocate platform data only if its NULL.
net:stmmac: fix memleak in the open method
ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
net: ipv6: fix wrong ping_v6_sendmsg return value
...
In order to avoid making code that deals with printing both, IPv4 and
IPv6 addresses, unnecessary complicated as for example ...
if (sa.sa_family == AF_INET6)
printk("... %pI6 ...", ..sin6_addr);
else
printk("... %pI4 ...", ..sin_addr.s_addr);
... it would be better to introduce a format specifier that can deal
with those kind of situations internally; just as we have a "struct
sockaddr" for generic mapping into "struct sockaddr_in" or "struct
sockaddr_in6" as e.g. done in "union sctp_addr". Then, we could
reduce the above statement into something like:
printk("... %pIS ..", &sockaddr);
In case our pointer is NULL, pointer() then deals with that already at
an earlier point in time internally. While we're at it, support for both
%piS/%pIS, where 'S' stands for sockaddr, comes (almost) for free.
Additionally to that, postfix specifiers 'p', 'f' and 's' are supported
as suggested and initially implemented in 2009 by Joe Perches [1].
Handling of those additional specifiers orientate on the initial RFC that
was proposed. Also we support IPv6 compressed format specified by 'c' and
various other IPv4 extensions as stated in the documentation part.
Likely, there are many other areas than just SCTP in the kernel to make
use of this extension as well.
[1] http://patchwork.ozlabs.org/patch/31480/
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
CC: Joe Perches <joe@perches.com>
CC: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
print_symbol takes a long and converts it to a function
name and offset. %pS does something similar, but doesn't
translate the address via __builtin_extract_return_addr.
%pSR does the translation.
This will enable replacing multiple calls like
printk(...);
printk_symbol(addr);
printk("\n");
with a single non-interleavable in dmesg
printk("... %pSR\n", (void *)addr);
Update documentation too.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add the %pa format specifier for printing a phys_addr_t type and its
derivative types (such as resource_size_t), since the physical address
size on some platforms can vary based on build options, regardless of
the native integer type.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Cc: Rob Landley <rob@landley.net>
Cc: George Spelvin <linux@horizon.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the documentation for simple_strto* to reflect that it has been
obsoleted and advise the usage of kstrto*.
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Joe Perches <joe@perches.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is another step towards better standard conformance. Rather than
adding a local buffer to store the specified portion of the string (with
the need to enforce an arbitrary maximum supported width to limit the
buffer size), do a maximum width conversion and then drop as much of it as
is necessary to meet the caller's request.
Also fail on negative field widths.
Uses the deprecated simple_strto*() functions because kstrtoXX() fail on
non-zero terminated strings.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Documentation/printk-formats.txt says to use %zd for a ssize_t argument
and some drivers do. Unfortunately this prints a positive number for
negative values eg:
tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error 4294967234
Add a case to va_args a ssize_t type if the interpretation should be
signed.
Tested on PPC32.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xen's pciback points out a couple of deficiencies with vsscanf()'s
standard conformance:
- Trailing character matching cannot be checked by the caller: With a
format string of "(%x:%x.%x) %n" absence of the closing parenthesis
cannot be checked, as input of "(00:00.0)" doesn't cause the %n to be
evaluated (because of the code not skipping white space before the
trailing %n).
- The parameter corresponding to a trailing %n could get filled even if
there was a matching error: With a format string of "(%x:%x.%x)%n",
input of "(00:00.0]" would still fill the respective variable pointed to
(and hence again make the mismatch non-detectable by the caller).
This patch aims at fixing those, but leaves other non-conforming aspects
of it untouched, among them these possibly relevant ones:
- improper handling of the assignment suppression character '*' (blindly
discarding all succeeding non-white space from the format and input
strings),
- not honoring conversion specifiers for %n, - not recognizing the C99
conversion specifier 't' (recognized by vsprintf()).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Numbering the 8 potential digits 2 though 9 never did make a lot of sense.
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If you're going to have a conditional branch after each 32x32->64-bit
multiply, might as well shrink the code and make it a loop.
This also avoids using the long multiply for small integers.
(This leaves the comments in a confusing state, but that's a separate
patch to make review easier.)
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Rabin Vincent <rabin@rab.in>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The same multiply-by-inverse technique can be used to convert division by
10000 to a 32x32->64-bit multiply.
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shrink the reciprocal approximations used in put_dec_full4() based on the
comments in put_dec_full9().
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are many places in the kernel where the drivers print small buffers
as a hex string. This patch adds a support of the variable width buffer
to print it as a hex string with a delimiter. The idea came from Pavel
Roskin here: http://www.digipedia.pl/usenet/thread/18835/17449/
Sample output of
pr_info("buf[%d:%d] %*phC\n", from, len, len, &buf[from]);
could be look like this:
[ 0.726130] buf[51:8] e8:16:b6:ef:e3:74:45:6e
[ 0.750736] buf[59:15] 31:81:b8:3f:35:49:06:ae:df:32:06:05:4a:af:55
[ 0.757602] buf[17:5] ac:16:d5:2c:ef
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When using ALT+SysRq+Q all the pointers are replaced with "pK-error" like
this:
[23153.208033] .base: pK-error
with echo h > /proc/sysrq-trigger it works:
[23107.776363] .base: ffff88023e60d540
The intent behind this behavior was to return "pK-error" in cases where
the %pK format specifier was used in interrupt context, because the
CAP_SYSLOG check wouldn't be meaningful. Clearly this should only apply
when kptr_restrict is actually enabled though.
Reported-by: Stevie Trujillo <stevie.trujillo@gmail.com>
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bluetooth uses mostly LE byte order which is reversed for visual
interpretation. Currently in Bluetooth in use unsafe batostr function.
This is a slightly modified version of Joe's patch (sent Sat, Dec 4,
2010).
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previous code was using optimizations which were developed to work well
even on narrow-word CPUs (by today's standards). But Linux runs only on
32-bit and wider CPUs. We can use that.
First: using 32x32->64 multiply and trivial 32-bit shift, we can correctly
divide by 10 much larger numbers, and thus we can print groups of 9 digits
instead of groups of 5 digits.
Next: there are two algorithms to print larger numbers. One is generic:
divide by 1000000000 and repeatedly print groups of (up to) 9 digits.
It's conceptually simple, but requires an (unsigned long long) /
1000000000 division.
Second algorithm splits 64-bit unsigned long long into 16-bit chunks,
manipulates them cleverly and generates groups of 4 decimal digits. It so
happens that it does NOT require long long division.
If long is > 32 bits, division of 64-bit values is relatively easy, and we
will use the first algorithm. If long long is > 64 bits (strange
architecture with VERY large long long), second algorithm can't be used,
and we again use the first one.
Else (if long is 32 bits and long long is 64 bits) we use second one.
And third: there is a simple optimization which takes fast path not only
for zero as was done before, but for all one-digit numbers.
In all tested cases new code is faster than old one, in many cases by 30%,
in few cases by more than 50% (for example, on x86-32, conversion of
12345678). Code growth is ~0 in 32-bit case and ~130 bytes in 64-bit
case.
This patch is based upon an original from Michal Nazarewicz.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Douglas W Jones <jones@cs.uiowa.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The '%p' output of the kernel's vsprintf() uses spec.field_width to
determine how many digits to output based on 2 * sizeof(void*) so that all
digits of a pointer are shown. ie. a pointer will be output as
"001A2B3C" instead of "1A2B3C". However, if the '#' flag is used in the
format (%#p), then the code doesn't take into account the width of the
'0x' prefix and will end up outputing "0x1A2B3C" instead of "0x001A2B3C".
This patch reworks the "pointer()" format hook to include 2 characters for
the '0x' prefix if the '#' flag is included.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using %ps in a printk format will sometimes fail silently and print the
empty string if the address passed in does not match a symbol that
kallsyms knows about. But using %pS will fall back to printing the full
address if kallsyms can't find the symbol. Make %ps act the same as %pS
by falling back to printing the address.
While we're here also make %ps print the module that a symbol comes from
so that it matches what %pS already does. Take this simple function for
example (in a module):
static void test_printk(void)
{
int test;
pr_info("with pS: %pS\n", &test);
pr_info("with ps: %ps\n", &test);
}
Before this patch:
with pS: 0xdff7df44
with ps:
After this patch:
with pS: 0xdff7df44
with ps: 0xdff7df44
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"[PATCH 0/3] RFC - module.h usage cleanups in fs/ and lib/"
https://lkml.org/lkml/2012/2/29/589
--
Fix up files in fs/ and lib/ dirs to only use module.h if they really
need it.
These are trivial in scope vs. the work done previously. We now have
things where any few remaining cleanups can be farmed out to arch or
subsystem maintainers, and I have done so when possible. What is
remaining here represents the bits that don't clearly lie within a
single arch/subsystem boundary, like the fs dir and the lib dir.
Some duplicate includes arising from overlapping fixes from
independent subsystem maintainer submissions are also quashed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Z4w0
-----END PGP SIGNATURE-----
Merge tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull cleanup of fs/ and lib/ users of module.h from Paul Gortmaker:
"Fix up files in fs/ and lib/ dirs to only use module.h if they really
need it.
These are trivial in scope vs the work done previously. We now have
things where any few remaining cleanups can be farmed out to arch or
subsystem maintainers, and I have done so when possible. What is
remaining here represents the bits that don't clearly lie within a
single arch/subsystem boundary, like the fs dir and the lib dir.
Some duplicate includes arising from overlapping fixes from
independent subsystem maintainer submissions are also quashed."
Fix up trivial conflicts due to clashes with other include file cleanups
(including some due to the previous bug.h cleanup pull).
* tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
lib: reduce the use of module.h wherever possible
fs: reduce the use of module.h wherever possible
includecheck: delete any duplicate instances of module.h
== stat_check.py
num = 0
with open("/proc/stat") as f:
while num < 1000 :
data = f.read()
f.seek(0, 0)
num = num + 1
==
perf shows
20.39% stat_check.py [kernel.kallsyms] [k] format_decode
13.41% stat_check.py [kernel.kallsyms] [k] number
12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf
10.85% stat_check.py [kernel.kallsyms] [k] memcpy
4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup
4.43% stat_check.py [kernel.kallsyms] [k] seq_printf
This patch removes most of calls to vsnprintf() by adding num_to_str()
and seq_print_decimal_ull(), which prints decimal numbers without rich
functions provided by printf().
On my 8cpu box.
== Before patch ==
[root@bluextal test]# time ./stat_check.py
real 0m0.150s
user 0m0.026s
sys 0m0.121s
== After patch ==
[root@bluextal test]# time ./stat_check.py
real 0m0.055s
user 0m0.022s
sys 0m0.030s
[akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()]
[andrea@betterlinux.com: avoid breaking the ABI in /proc/stat]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrea Righi <andrea@betterlinux.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Turner <pjt@google.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map
them onto including export.h -- or if the file isn't even
using those, then just delete the include. Fix up any implicit
include dependencies that were being masked by module.h along
the way.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
kasprintf() (and potentially other functions that I didn't run across so
far) want to evaluate argument lists twice. Caring to do so for the
primary list is obviously their job, but they can't reasonably be
expected to check the format string for instances of %pV, which however
need special handling too: On architectures like x86-64 (as opposed to
e.g. ix86), using the same argument list twice doesn't produce the
expected results, as an internally managed cursor gets updated during
the first run.
Fix the problem by always acting on a copy of the original list when
handling %pV.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
