IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmXrUFQACgkQOlYIJqCj
N/11dhAAnr9e6mPmXvaH4YKcvOGgTmwIQdi5W4IBzGm27ErEb0Vyskx3UATRhRm+
gZyp3wNgEA9LeifICDNu4ypn7HZcl2VtRql6FYcB8Bcu8OiHfU8PhWL0/qrpY20e
zffUj2tDweq2ft9Iks1SQJD0sxFkcXIcSKOffP7pRZJHFTKLltGORXwxzd9HJHPY
nc4nERKegK2yH4A4gY6nZ0oV5L3OMUNHx815db5Y+HxXOIjBCjTQiNNd6mUdyX1N
C5sIiElXLdvRTSDvirHfA32LqNwnajDGox4QKZkB3wszCxJ3kRd4OCkTEKMYKHxd
KoKCJQnAdJFFW9xqbT8nNKXZ+hg2+ZQuoSaBuwKryf7jWi0e6a7jcV0OH+cQSZw7
UNudKhs3r4ambfvnFp2IVZlZREMDB+LAjo2So48Jn/JGCAzqte3XqwVKskn9pS9S
qeauXCdOLioZALYtTBl8RM1rEY5mbwQrpPv9CzbeU09qQ/hpXV14W9GmbyeOZcI1
T1cYgEqlLuifRluwT/hxrY321+4noF116gSK1yb07x/sJU8/lhRooEk9V562066E
qo6nIvc7Bv9gTGLwo6VReKSPcTT/6t3HwgPsRjqe+evso3EFN9f9hG+uPxtO6TUj
pdPm3mkj2KfxDdJLf+Ys16gyGdiwI0ZImIkA0uLdM0zftNsrb4Y=
=vayI
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.9' of https://github.com/kvm-x86/linux into HEAD
KVM x86 PMU changes for 6.9:
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
Bite the bullet, and open code all direct reads of DR6 and DR7. KVM
currently has a mix of open coded accesses and calls to kvm_get_dr(),
which is confusing and ugly because there's no rhyme or reason as to why
any particular chunk of code uses kvm_get_dr().
The obvious alternative is to force all accesses through kvm_get_dr(),
but it's not at all clear that doing so would be a net positive, e.g. even
if KVM ends up wanting/needing to force all reads through a common helper,
e.g. to play caching games, the cost of reverting this change is likely
lower than the ongoing cost of maintaining weird, arbitrary code.
No functional change intended.
Cc: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240209220752.388160-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Convert kvm_get_dr()'s output parameter to a return value, and clean up
most of the mess that was created by forcing callers to provide a pointer.
No functional change intended.
Acked-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240209220752.388160-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Snapshot the event selectors for the events that KVM emulates in software,
which is currently instructions retired and branch instructions retired.
The event selectors a tied to the underlying CPU, i.e. are constant for a
given platform even though perf doesn't manage the mappings as such.
Getting the event selectors from perf isn't exactly cheap, especially if
mitigations are enabled, as at least one indirect call is involved.
Snapshot the values in KVM instead of optimizing perf as working with the
raw event selectors will be required if KVM ever wants to emulate events
that aren't part of perf's uABI, i.e. that don't have an "enum perf_hw_id"
entry.
Link: https://lore.kernel.org/r/20231110022857.1273836-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
switch a memory area between guest_memfd and regular anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that guarantees
confidentiality (AMD PSP, Intel TDX module, or EL2 in the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new guest_memfd
and page attributes infrastructure. This is mostly useful for testing,
since there is no pKVM-like infrastructure to provide a meaningfully
reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages during
CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in non-leaf
TDP MMU SPTEs if a racing thread replaces a huge SPTE with a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually care
about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a stable TSC",
because some of them don't expect the "TSC stable" bit (added to the pvclock
ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM always
flushes on nested transitions, i.e. always satisfies flush requests. This
allows running bleeding edge versions of VMware Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV support.
- On AMD machines with vNMI, always rely on hardware instead of intercepting
IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters and other state
prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events using a
dedicated field instead of snapshotting the "previous" counter. If the
hardware PMC count triggers overflow that is recognized in the same VM-Exit
that KVM manually bumps an event count, KVM would pend PMIs for both the
hardware-triggered overflow and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be problematic for
subsystems that require no regressions for W=1 builds.
- Advertise all of the host-supported CPUID bits that enumerate IA32_SPEC_CTRL
"features".
- Don't force a masterclock update when a vCPU synchronizes to the current TSC
generation, as updating the masterclock can cause kvmclock's time to "jump"
unexpectedly, e.g. when userspace hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter fault paths,
partly as a super minor optimization, but mostly to make KVM play nice with
position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV "emulation"
at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing flag
in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix the
various bugs that were lurking due to lack of said annotation.
There are two non-KVM patches buried in the middle of guest_memfd support:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWcMWkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO15gf/WLmmg3SET6Uzw9iEq2xo28831ZA+
6kpILfIDGKozV5safDmMvcInlc/PTnqOFrsKyyN4kDZ+rIJiafJdg/loE0kPXBML
wdR+2ix5kYI1FucCDaGTahskBDz8Lb/xTpwGg9BFLYFNmuUeHc74o6GoNvr1uliE
4kLZL2K6w0cSMPybUD+HqGaET80ZqPwecv+s1JL+Ia0kYZJONJifoHnvOUJ7DpEi
rgudVdgzt3EPjG0y1z6MjvDBXTCOLDjXajErlYuZD3Ej8N8s59Dh2TxOiDNTLdP4
a4zjRvDmgyr6H6sz+upvwc7f4M4p+DBvf+TkWF54mbeObHUYliStqURIoA==
=66Ws
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
-----BEGIN PGP SIGNATURE-----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=qUZ2
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-lam-6.8' of https://github.com/kvm-x86/linux into HEAD
KVM x86 support for virtualizing Linear Address Masking (LAM)
Add KVM support for Linear Address Masking (LAM). LAM tweaks the canonicality
checks for most virtual address usage in 64-bit mode, such that only the most
significant bit of the untranslated address bits must match the polarity of the
last translated address bit. This allows software to use ignored, untranslated
address bits for metadata, e.g. to efficiently tag pointers for address
sanitization.
LAM can be enabled separately for user pointers and supervisor pointers, and
for userspace LAM can be select between 48-bit and 57-bit masking
- 48-bit LAM: metadata bits 62:48, i.e. LAM width of 15.
- 57-bit LAM: metadata bits 62:57, i.e. LAM width of 6.
For user pointers, LAM enabling utilizes two previously-reserved high bits from
CR3 (similar to how PCID_NOFLUSH uses bit 63): LAM_U48 and LAM_U57, bits 62 and
61 respectively. Note, if LAM_57 is set, LAM_U48 is ignored, i.e.:
- CR3.LAM_U48=0 && CR3.LAM_U57=0 == LAM disabled for user pointers
- CR3.LAM_U48=1 && CR3.LAM_U57=0 == LAM-48 enabled for user pointers
- CR3.LAM_U48=x && CR3.LAM_U57=1 == LAM-57 enabled for user pointers
For supervisor pointers, LAM is controlled by a single bit, CR4.LAM_SUP, with
the 48-bit versus 57-bit LAM behavior following the current paging mode, i.e.:
- CR4.LAM_SUP=0 && CR4.LA57=x == LAM disabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=0 == LAM-48 enabled for supervisor pointers
- CR4.LAM_SUP=1 && CR4.LA57=1 == LAM-57 enabled for supervisor pointers
The modified LAM canonicality checks:
- LAM_S48 : [ 1 ][ metadata ][ 1 ]
63 47
- LAM_U48 : [ 0 ][ metadata ][ 0 ]
63 47
- LAM_S57 : [ 1 ][ metadata ][ 1 ]
63 56
- LAM_U57 + 5-lvl paging : [ 0 ][ metadata ][ 0 ]
63 56
- LAM_U57 + 4-lvl paging : [ 0 ][ metadata ][ 0...0 ]
63 56..47
The bulk of KVM support for LAM is to emulate LAM's modified canonicality
checks. The approach taken by KVM is to "fill" the metadata bits using the
highest bit of the translated address, e.g. for LAM-48, bit 47 is sign-extended
to bits 62:48. The most significant bit, 63, is *not* modified, i.e. its value
from the raw, untagged virtual address is kept for the canonicality check. This
untagging allows
Aside from emulating LAM's canonical checks behavior, LAM has the usual KVM
touchpoints for selectable features: enumeration (CPUID.7.1:EAX.LAM[bit 26],
enabling via CR3 and CR4 bits, etc.
'hv_evmcs_vmptr'/'hv_evmcs_map'/'hv_evmcs' fields in 'struct nested_vmx'
should not be used when !CONFIG_KVM_HYPERV, hide them when
!CONFIG_KVM_HYPERV.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-16-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
There's a number of 'vmx->nested.hv_evmcs' accesses in nested.c, introduce
'nested_vmx_evmcs()' accessor to hide them all in !CONFIG_KVM_HYPERV case.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-15-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In order to get rid of raw 'vmx->nested.hv_evmcs_vmptr' accesses when
!CONFIG_KVM_HYPERV, introduce a pair of helpers:
nested_vmx_is_evmptr12_valid() to check that eVMPTR points to a valid
address.
nested_vmx_is_evmptr12_valid() to check that eVMPTR either points to a
valid address or is in 'pending' port-migration state (meaning it is
supposed to be valid but the exact address wasn't acquired from guest's
memory yet).
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-14-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Hyper-V emulation in KVM is a fairly big chunk and in some cases it may be
desirable to not compile it in to reduce module sizes as well as the attack
surface. Introduce CONFIG_KVM_HYPERV option to make it possible.
Note, there's room for further nVMX/nSVM code optimizations when
!CONFIG_KVM_HYPERV, this will be done in follow-up patches.
Reorganize Makefile a bit so all CONFIG_HYPERV and CONFIG_KVM_HYPERV files
are grouped together.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-13-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
To avoid overloading handle_vmclear() with Hyper-V specific details and to
prepare the code to making Hyper-V emulation optional, create a dedicated
nested_evmcs_handle_vmclear() helper.
No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-9-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
As a preparation to making Hyper-V emulation optional, introduce a helper
to handle pending KVM_REQ_HV_TLB_FLUSH requests.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20231205103630.1391318-8-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stub in vmx_get_untagged_addr() and wire up calls from the emulator (via
get_untagged_addr()) and "direct" calls from various VM-Exit handlers in
VMX where LAM untagging is supposed to be applied. Defer implementing
the guts of vmx_get_untagged_addr() to future patches purely to make the
changes easier to consume.
LAM is active only for 64-bit linear addresses and several types of
accesses are exempted.
- Cases need to untag address (handled in get_vmx_mem_address())
Operand(s) of VMX instructions and INVPCID.
Operand(s) of SGX ENCLS.
- Cases LAM doesn't apply to (no change needed)
Operand of INVLPG.
Linear address in INVPCID descriptor.
Linear address in INVVPID descriptor.
BASEADDR specified in SECS of ECREATE.
Note:
- LAM doesn't apply to write to control registers or MSRs
- LAM masking is applied before walking page tables, i.e. the faulting
linear address in CR2 doesn't contain the metadata.
- The guest linear address saved in VMCS doesn't contain metadata.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20230913124227.12574-10-binbin.wu@linux.intel.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove kvm_vcpu_is_illegal_gpa() and use !kvm_vcpu_is_legal_gpa() instead.
The "illegal" helper actually predates the "legal" helper, the only reason
the "illegal" variant wasn't removed by commit 4bda0e97868a ("KVM: x86:
Add a helper to check for a legal GPA") was to avoid code churn. Now that
CR3 has a dedicated helper, there are fewer callers, and so the code churn
isn't that much of a deterrent.
No functional change intended.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20230913124227.12574-8-binbin.wu@linux.intel.com
[sean: provide a bit of history in the changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add and use kvm_vcpu_is_legal_cr3() to check CR3's legality to provide
a clear distinction between CR3 and GPA checks. This will allow exempting
bits from kvm_vcpu_is_legal_cr3() without affecting general GPA checks,
e.g. for upcoming features that will use high bits in CR3 for feature
enabling.
No functional change intended.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Xuelian Guo <xuelian.guo@intel.com>
Link: https://lore.kernel.org/r/20230913124227.12574-7-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track "VMX exposed to L1" via a governed feature flag instead of using a
dedicated helper to provide the same functionality. The main goal is to
drive convergence between VMX and SVM with respect to querying features
that are controllable via module param (SVM likes to cache nested
features), avoiding the guest CPUID lookups at runtime is just a bonus
and unlikely to provide any meaningful performance benefits.
Note, X86_FEATURE_VMX is set in kvm_cpu_caps if and only if "nested" is
true, and the CPU obviously supports VMX if KVM+VMX is running. I.e. the
check on "nested" is now implicitly down by the kvm_cpu_cap_has() check
in kvm_governed_feature_check_and_set().
No functional change intended.
Reviewed-by: Yuan Yao <yuan.yao@intel.com>
Reviwed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20230815203653.519297-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rename the XSAVES secondary execution control to follow KVM's preferred
style so that XSAVES related logic can use common macros that depend on
KVM's preferred style.
No functional change intended.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230815203653.519297-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the handling of GLOBAL_CTRL, GLOBAL_STATUS, and GLOBAL_OVF_CTRL,
a.k.a. GLOBAL_STATUS_RESET, from Intel PMU code to generic x86 PMU code.
AMD PerfMonV2 defines three registers that have the same semantics as
Intel's variants, just with different names and indices. Conveniently,
since KVM virtualizes GLOBAL_CTRL on Intel only for PMU v2 and above, and
AMD's version shows up in v2, KVM can use common code for the existence
check as well.
Signed-off-by: Like Xu <likexu@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230603011058.1038821-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Advertise UMIP as emulated if and only if the host doesn't natively
support UMIP, otherwise vmx_umip_emulated() is misleading when the host
_does_ support UMIP. Of the four users of vmx_umip_emulated(), two
already check for native support, and the logic in vmx_set_cpu_caps() is
relevant if and only if UMIP isn't natively supported as UMIP is set in
KVM's caps by kvm_set_cpu_caps() when UMIP is present in hardware.
That leaves KVM's stuffing of X86_CR4_UMIP into the default cr4_fixed1
value enumerated for nested VMX. In that case, checking for (lack of)
host support is actually a bug fix of sorts, as enumerating UMIP support
based solely on descriptor table exiting works only because KVM doesn't
sanity check MSR_IA32_VMX_CR4_FIXED1. E.g. if a (very theoretical) host
supported UMIP in hardware but didn't allow UMIP+VMX, KVM would advertise
UMIP but not actually emulate UMIP. Of course, KVM would explode long
before it could run a nested VM on said theoretical CPU, as KVM doesn't
modify host CR4 when enabling VMX, i.e. would load an "illegal" value into
vmcs.HOST_CR4.
Reported-by: Robert Hoo <robert.hu@intel.com>
Link: https://lore.kernel.org/all/20230310125718.1442088-2-robert.hu@intel.com
Link: https://lore.kernel.org/r/20230413231914.1482782-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
* More phys_to_virt conversions
* Improvement of AP management for VSIE (nested virtualization)
ARM64:
* Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
* New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features
being moved to VMMs rather than be implemented in the kernel.
* Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one.
This last part allows the NV timer code to be implemented on
top.
* A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
* The usual selftest fixes and improvements.
KVM x86 changes for 6.4:
* Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
and by giving the guest control of CR0.WP when EPT is enabled on VMX
(VMX-only because SVM doesn't support per-bit controls)
* Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
as a bool
* Move AMD_PSFD to cpufeatures.h and purge KVM's definition
* Avoid unnecessary writes+flushes when the guest is only adding new PTEs
* Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
when emulating invalidations
* Clean up the range-based flushing APIs
* Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
* Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
* Disallow virtualizing legacy LBRs if architectural LBRs are available,
the two are mutually exclusive in hardware
* Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
after KVM_RUN, similar to CPUID features
* Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
* Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
x86 AMD:
* Add support for virtual NMIs
* Fixes for edge cases related to virtual interrupts
x86 Intel:
* Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
not being reported due to userspace not opting in via prctl()
* Fix a bug in emulation of ENCLS in compatibility mode
* Allow emulation of NOP and PAUSE for L2
* AMX selftests improvements
* Misc cleanups
MIPS:
* Constify MIPS's internal callbacks (a leftover from the hardware enabling
rework that landed in 6.3)
Generic:
* Drop unnecessary casts from "void *" throughout kvm_main.c
* Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
size by 8 bytes on 64-bit kernels by utilizing a padding hole
Documentation:
* Fix goof introduced by the conversion to rST
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
=S2Hq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"s390:
- More phys_to_virt conversions
- Improvement of AP management for VSIE (nested virtualization)
ARM64:
- Numerous fixes for the pathological lock inversion issue that
plagued KVM/arm64 since... forever.
- New framework allowing SMCCC-compliant hypercalls to be forwarded
to userspace, hopefully paving the way for some more features being
moved to VMMs rather than be implemented in the kernel.
- Large rework of the timer code to allow a VM-wide offset to be
applied to both virtual and physical counters as well as a
per-timer, per-vcpu offset that complements the global one. This
last part allows the NV timer code to be implemented on top.
- A small set of fixes to make sure that we don't change anything
affecting the EL1&0 translation regime just after having having
taken an exception to EL2 until we have executed a DSB. This
ensures that speculative walks started in EL1&0 have completed.
- The usual selftest fixes and improvements.
x86:
- Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
enabled, and by giving the guest control of CR0.WP when EPT is
enabled on VMX (VMX-only because SVM doesn't support per-bit
controls)
- Add CR0/CR4 helpers to query single bits, and clean up related code
where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
return as a bool
- Move AMD_PSFD to cpufeatures.h and purge KVM's definition
- Avoid unnecessary writes+flushes when the guest is only adding new
PTEs
- Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
optimizations when emulating invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
single A/D bit using a LOCK AND instead of XCHG, and skip all of
the "handle changed SPTE" overhead associated with writing the
entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid
having to walk (potentially) all descriptors during insertion and
deletion, which gets quite expensive if the guest is spamming
fork()
- Disallow virtualizing legacy LBRs if architectural LBRs are
available, the two are mutually exclusive in hardware
- Disallow writes to immutable feature MSRs (notably
PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features
- Overhaul the vmx_pmu_caps selftest to better validate
PERF_CAPABILITIES
- Apply PMU filters to emulated events and add test coverage to the
pmu_event_filter selftest
- AMD SVM:
- Add support for virtual NMIs
- Fixes for edge cases related to virtual interrupts
- Intel AMX:
- Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
XTILE_DATA is not being reported due to userspace not opting in
via prctl()
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- AMX selftests improvements
- Misc cleanups
MIPS:
- Constify MIPS's internal callbacks (a leftover from the hardware
enabling rework that landed in 6.3)
Generic:
- Drop unnecessary casts from "void *" throughout kvm_main.c
- Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
struct size by 8 bytes on 64-bit kernels by utilizing a padding
hole
Documentation:
- Fix goof introduced by the conversion to rST"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
KVM: s390: pci: fix virtual-physical confusion on module unload/load
KVM: s390: vsie: clarifications on setting the APCB
KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
KVM: selftests: Test the PMU event "Instructions retired"
KVM: selftests: Copy full counter values from guest in PMU event filter test
KVM: selftests: Use error codes to signal errors in PMU event filter test
KVM: selftests: Print detailed info in PMU event filter asserts
KVM: selftests: Add helpers for PMC asserts in PMU event filter test
KVM: selftests: Add a common helper for the PMU event filter guest code
KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
KVM: arm64: vhe: Drop extra isb() on guest exit
KVM: arm64: vhe: Synchronise with page table walker on MMU update
KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
KVM: arm64: nvhe: Synchronise with page table walker on TLBI
KVM: arm64: Handle 32bit CNTPCTSS traps
KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
KVM: arm64: vgic: Don't acquire its_lock before config_lock
KVM: selftests: Add test to verify KVM's supported XCR0
...
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=FOnk
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-vmx-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM VMX changes for 6.4:
- Fix a bug in emulation of ENCLS in compatibility mode
- Allow emulation of NOP and PAUSE for L2
- Misc cleanups
- Tweak FNAME(sync_spte) to avoid unnecessary writes+flushes when the
guest is only adding new PTEs
- Overhaul .sync_page() and .invlpg() to share the .sync_page()
implementation, i.e. utilize .sync_page()'s optimizations when emulating
invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=zb4u
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-mmu-6.4' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.4:
- Tweak FNAME(sync_spte) to avoid unnecessary writes+flushes when the
guest is only adding new PTEs
- Overhaul .sync_page() and .invlpg() to share the .sync_page()
implementation, i.e. utilize .sync_page()'s optimizations when emulating
invalidations
- Clean up the range-based flushing APIs
- Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
changed SPTE" overhead associated with writing the entire entry
- Track the number of "tail" entries in a pte_list_desc to avoid having
to walk (potentially) all descriptors during insertion and deletion,
which gets quite expensive if the guest is spamming fork()
- Misc cleanups
Don't report an error code to L1 when synthesizing a nested VM-Exit and
L2 is in Real Mode. Per Intel's SDM, regarding the error code valid bit:
This bit is always 0 if the VM exit occurred while the logical processor
was in real-address mode (CR0.PE=0).
The bug was introduced by a recent fix for AMD's Paged Real Mode, which
moved the error code suppression from the common "queue exception" path
to the "inject exception" path, but missed VMX's "synthesize VM-Exit"
path.
Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230322143300.2209476-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to check if a specific CR0/CR4 bit is set to avoid a plethora
of implicit casts from the "unsigned long" return of kvm_read_cr*_bits(),
and to make each caller's intent more obvious.
Defer converting helpers that do truly ugly casts from "unsigned long" to
"int", e.g. is_pse(), to a future commit so that their conversion is more
isolated.
Opportunistically drop the superfluous pcid_enabled from kvm_set_cr3();
the local variable is used only once, immediately after its declaration.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://lore.kernel.org/r/20230322045824.22970-2-binbin.wu@linux.intel.com
[sean: move "obvious" conversions to this commit, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Guests like grsecurity that make heavy use of CR0.WP to implement kernel
level W^X will suffer from the implied VMEXITs.
With EPT there is no need to intercept a guest change of CR0.WP, so
simply make it a guest owned bit if we can do so.
This implies that a read of a guest's CR0.WP bit might need a VMREAD.
However, the only potentially affected user seems to be kvm_init_mmu()
which is a heavy operation to begin with. But also most callers already
cache the full value of CR0 anyway, so no additional VMREAD is needed.
The only exception is nested_vmx_load_cr3().
This change is VMX-specific, as SVM has no such fine grained control
register intercept control.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20230322013731.102955-7-minipli@grsecurity.net
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
nested_vmx_setup_ctls_msrs() is used to set up the various VMX MSR
controls for nested VMX. But it is a bit lengthy, just add helpers
to setup the configuration of VMX MSRs.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20230119141946.585610-2-yu.c.zhang@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
nested_vmx_setup_ctls_msrs() initializes the vmcs_conf.nested,
which stores the global VMX MSR configurations when nested is
supported, regardless of any particular CPUID settings for one
VM.
Commit 6defc591846d ("KVM: nVMX: include conditional controls
in /dev/kvm KVM_GET_MSRS") added the some feature flags for
secondary proc-based controls, so that those features can be
available in KVM_GET_MSRS. Yet this commit did not remove the
obsolete comments in nested_vmx_setup_ctls_msrs().
Just fix the comments, and no functional change intended.
Fixes: 6defc591846d ("KVM: nVMX: include conditional controls in /dev/kvm KVM_GET_MSRS")
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20230119141946.585610-1-yu.c.zhang@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use kvm_mmu_invalidate_addr() instead open calls to mmu->invlpg().
No functional change intended.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Link: https://lore.kernel.org/r/20230216235321.735214-1-jiangshanlai@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Expose IA32_FLUSH_CMD to the guest if the guest CPUID enumerates
support for this MSR. As with IA32_PRED_CMD, permission for
unintercepted writes to this MSR will be granted to the guest after
the first non-zero write.
Co-developed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20230201132905.549148-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_vmx_check_controls() has already run by the time KVM checks host state,
so the "host address space size" exit control can only be set on x86-64 hosts.
Simplify the condition at the cost of adding some dead code to 32-bit kernels.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Values of base settings for nested proc-based VM-Execution control MSR come
from the ones for non-nested. And for SECONDARY_EXEC_ENABLE_VMFUNC flag,
KVM currently a) first mask off it from vmcs_conf->cpu_based_2nd_exec_ctrl;
b) then check it against the same source; c) and reset it again if host has
it.
So just simplify this, by not masking off SECONDARY_EXEC_ENABLE_VMFUNC in
the first place.
No functional change.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20221109075413.1405803-3-yu.c.zhang@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly disable VMFUNC in vmcs01 to document that KVM doesn't support
any VM-Functions for L1. WARN in the dedicated VMFUNC handler if an exit
occurs while L1 is active, but keep the existing handlers as fallbacks to
avoid killing the VM as an unexpected VMFUNC VM-Exit isn't fatal
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20221109075413.1405803-2-yu.c.zhang@linux.intel.com
[sean: don't kill the VM on an unexpected VMFUNC from L1, reword changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define pr_fmt using KBUILD_MODNAME for all KVM x86 code so that printks
use consistent formatting across common x86, Intel, and AMD code. In
addition to providing consistent print formatting, using KBUILD_MODNAME,
e.g. kvm_amd and kvm_intel, allows referencing SVM and VMX (and SEV and
SGX and ...) as technologies without generating weird messages, and
without causing naming conflicts with other kernel code, e.g. "SEV: ",
"tdx: ", "sgx: " etc.. are all used by the kernel for non-KVM subsystems.
Opportunistically move away from printk() for prints that need to be
modified anyways, e.g. to drop a manual "kvm: " prefix.
Opportunistically convert a few SGX WARNs that are similarly modified to
WARN_ONCE; in the very unlikely event that the WARNs fire, odds are good
that they would fire repeatedly and spam the kernel log without providing
unique information in each print.
Note, defining pr_fmt yields undesirable results for code that uses KVM's
printk wrappers, e.g. vcpu_unimpl(). But, that's a pre-existing problem
as SVM/kvm_amd already defines a pr_fmt, and thankfully use of KVM's
wrappers is relatively limited in KVM x86 code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20221130230934.1014142-35-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set ENABLE_USR_WAIT_PAUSE in KVM's supported VMX MSR configuration if the
feature is supported in hardware and enabled in KVM's base, non-nested
configuration, i.e. expose ENABLE_USR_WAIT_PAUSE to L1 if it's supported.
This fixes a bug where saving/restoring, i.e. migrating, a vCPU will fail
if WAITPKG (the associated CPUID feature) is enabled for the vCPU, and
obviously allows L1 to enable the feature for L2.
KVM already effectively exposes ENABLE_USR_WAIT_PAUSE to L1 by stuffing
the allowed-1 control ina vCPU's virtual MSR_IA32_VMX_PROCBASED_CTLS2 when
updating secondary controls in response to KVM_SET_CPUID(2), but (a) that
depends on flawed code (KVM shouldn't touch VMX MSRs in response to CPUID
updates) and (b) runs afoul of vmx_restore_control_msr()'s restriction
that the guest value must be a strict subset of the supported host value.
Although no past commit explicitly enabled nested support for WAITPKG,
doing so is safe and functionally correct from an architectural
perspective as no additional KVM support is needed to virtualize TPAUSE,
UMONITOR, and UMWAIT for L2 relative to L1, and KVM already forwards
VM-Exits to L1 as necessary (commit bf653b78f960, "KVM: vmx: Introduce
handle_unexpected_vmexit and handle WAITPKG vmexit").
Note, KVM always keeps the hosts MSR_IA32_UMWAIT_CONTROL resident in
hardware, i.e. always runs both L1 and L2 with the host's power management
settings for TPAUSE and UMWAIT. See commit bf09fb6cba4f ("KVM: VMX: Stop
context switching MSR_IA32_UMWAIT_CONTROL") for more details.
Fixes: e69e72faa3a0 ("KVM: x86: Add support for user wait instructions")
Cc: stable@vger.kernel.org
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20221213062306.667649-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly drop the result of kvm_vcpu_write_guest() when writing the
"launch state" as part of VMCLEAR emulation, and add a comment to call
out that KVM's behavior is architecturally valid. Intel's pseudocode
effectively says that VMCLEAR is a nop if the target VMCS address isn't
in memory, e.g. if the address points at MMIO.
Add a FIXME to call out that suppressing failures on __copy_to_user() is
wrong, as memory (a memslot) does exist in that case. Punt the issue to
the future as open coding kvm_vcpu_write_guest() just to make sure the
guest dies with -EFAULT isn't worth the extra complexity. The flaw will
need to be addressed if KVM ever does something intelligent on uaccess
failures, e.g. to support post-copy demand paging, but in that case KVM
will need a more thorough overhaul, i.e. VMCLEAR shouldn't need to open
code a core KVM helper.
No functional change intended.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527765 ("Error handling issues")
Fixes: 587d7e72aedc ("kvm: nVMX: VMCLEAR should not cause the vCPU to shut down")
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221220154224.526568-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reword the comments that (attempt to) document nVMX's overrides of the
CR0/4 read shadows for L2 after calling vmx_set_cr0/4(). The important
behavior that needs to be documented is that KVM needs to override the
shadows to account for L1's masks even though the shadows are set by the
common helpers (and that setting the shadows first would result in the
correct shadows being clobbered).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20220831000721.4066617-1-seanjc@google.com
According to Intel's document on Indirect Branch Restricted
Speculation, "Enabling IBRS does not prevent software from controlling
the predicted targets of indirect branches of unrelated software
executed later at the same predictor mode (for example, between two
different user applications, or two different virtual machines). Such
isolation can be ensured through use of the Indirect Branch Predictor
Barrier (IBPB) command." This applies to both basic and enhanced IBRS.
Since L1 and L2 VMs share hardware predictor modes (guest-user and
guest-kernel), hardware IBRS is not sufficient to virtualize
IBRS. (The way that basic IBRS is implemented on pre-eIBRS parts,
hardware IBRS is actually sufficient in practice, even though it isn't
sufficient architecturally.)
For virtual CPUs that support IBRS, add an indirect branch prediction
barrier on emulated VM-exit, to ensure that the predicted targets of
indirect branches executed in L1 cannot be controlled by software that
was executed in L2.
Since we typically don't intercept guest writes to IA32_SPEC_CTRL,
perform the IBPB at emulated VM-exit regardless of the current
IA32_SPEC_CTRL.IBRS value, even though the IBPB could technically be
deferred until L1 sets IA32_SPEC_CTRL.IBRS, if IA32_SPEC_CTRL.IBRS is
clear at emulated VM-exit.
This is CVE-2022-2196.
Fixes: 5c911beff20a ("KVM: nVMX: Skip IBPB when switching between vmcs01 and vmcs02")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221019213620.1953281-3-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Inject #GP for if VMXON is attempting with a CR0/CR4 that fails the
generic "is CRx valid" check, but passes the CR4.VMXE check, and do the
generic checks _after_ handling the post-VMXON VM-Fail.
The CR4.VMXE check, and all other #UD cases, are special pre-conditions
that are enforced prior to pivoting on the current VMX mode, i.e. occur
before interception if VMXON is attempted in VMX non-root mode.
All other CR0/CR4 checks generate #GP and effectively have lower priority
than the post-VMXON check.
Per the SDM:
IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ...
THEN #UD;
ELSIF not in VMX operation
THEN
IF (CPL > 0) or (in A20M mode) or
(the values of CR0 and CR4 are not supported in VMX operation)
THEN #GP(0);
ELSIF in VMX non-root operation
THEN VMexit;
ELSIF CPL > 0
THEN #GP(0);
ELSE VMfail("VMXON executed in VMX root operation");
FI;
which, if re-written without ELSIF, yields:
IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ...
THEN #UD
IF in VMX non-root operation
THEN VMexit;
IF CPL > 0
THEN #GP(0)
IF in VMX operation
THEN VMfail("VMXON executed in VMX root operation");
IF (in A20M mode) or
(the values of CR0 and CR4 are not supported in VMX operation)
THEN #GP(0);
Note, KVM unconditionally forwards VMXON VM-Exits that occur in L2 to L1,
i.e. there is no need to check the vCPU is not in VMX non-root mode. Add
a comment to explain why unconditionally forwarding such exits is
functionally correct.
Reported-by: Eric Li <ercli@ucdavis.edu>
Fixes: c7d855c2aff2 ("KVM: nVMX: Inject #UD if VMXON is attempted with incompatible CR0/CR4")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006001956.329314-1-seanjc@google.com
Enable L2 TLB flush feature on nVMX when:
- Enlightened VMCS is in use.
- The feature flag is enabled in eVMCS.
- The feature flag is enabled in partition assist page.
Perform synthetic vmexit to L1 after processing TLB flush call upon
request (HV_VMX_SYNTHETIC_EXIT_REASON_TRAP_AFTER_FLUSH).
Note: nested_evmcs_l2_tlb_flush_enabled() uses cached VP assist page copy
which gets updated from nested_vmx_handle_enlightened_vmptrld(). This is
also guaranteed to happen post migration with eVMCS backed L2 running.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-27-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to enabling L2 TLB flush, cache VP assist page in
'struct kvm_vcpu_hv'. While on it, rename nested_enlightened_vmentry()
to nested_get_evmptr() and make it return eVMCS GPA directly.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-26-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To handle L2 TLB flush requests, KVM needs to keep track of L2's VM_ID/
VP_IDs which are set by L1 hypervisor. 'Partition assist page' address is
also needed to handle post-flush exit to L1 upon request.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-20-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To conform with SVM, rename VMX specific Hyper-V files from "evmcs.{ch}"
to "hyperv.{ch}". While Enlightened VMCS is a lion's share of these
files, some stuff (e.g. enlightened MSR bitmap, the upcoming Hyper-V
L2 TLB flush, ...) goes beyond that.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes three issues in nested SVM:
1) in the shutdown_interception() vmexit handler we call kvm_vcpu_reset().
However, if running nested and L1 doesn't intercept shutdown, the function
resets vcpu->arch.hflags without properly leaving the nested state.
This leaves the vCPU in inconsistent state and later triggers a kernel
panic in SVM code. The same bug can likely be triggered by sending INIT
via local apic to a vCPU which runs a nested guest.
On VMX we are lucky that the issue can't happen because VMX always
intercepts triple faults, thus triple fault in L2 will always be
redirected to L1. Plus, handle_triple_fault() doesn't reset the vCPU.
INIT IPI can't happen on VMX either because INIT events are masked while
in VMX mode.
Secondarily, KVM doesn't honour SHUTDOWN intercept bit of L1 on SVM.
A normal hypervisor should always intercept SHUTDOWN, a unit test on
the other hand might want to not do so.
Finally, the guest can trigger a kernel non rate limited printk on SVM
from the guest, which is fixed as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is SVM correctness fix - although a sane L1 would intercept
SHUTDOWN event, it doesn't have to, so we have to honour this.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
add kvm_leave_nested which wraps a call to nested_ops->leave_nested
into a function.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221103141351.50662-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Create a new header and source with code related to system management
mode emulation. Entry and exit will move there too; for now,
opportunistically rename put_smstate to PUT_SMSTATE while moving
it to smm.h, and adjust the SMM state saving code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220929172016.319443-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
