4404 Commits

Author SHA1 Message Date
Josh Boyer
6f031101f5 [POWERPC] 4xx: Fix PCI mem in rainier DTS
This fixes the PCI node in the Rainier to match the spec from AMCC.  A
similar fix was done for 440EPx, which shares the same values as 440GRx.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-29 07:06:56 -05:00
David Gibson
71f349799b [POWERPC] Convert remaining dts-v0 files to v1
At the moment we have a mixture of left-over version 0 and new-format
version 1 files in arch/powerpc/boot/dts.  This is potentially
confusing to people new to the dts format attempting to figure it out.

So, this patch converts all the as-yet unconverted dts v0 files and
converts them to v1.  They're mechanically-converted, and not hand
tweaked so in some cases they're not 100% in keeping with usual v1
style, but the convertor program does have some heuristics so the
discrepancies aren't too bad.

I have checked that this patch produces no changes to the resulting
dtb binaries.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-29 07:06:56 -05:00
Stephen Neuendorffer
b786af117b [POWERPC] Refactor DCR code
Previously, DCR support was configured at compile time to either use
MMIO or native dcr instructions.  Although this works for most
platforms, it fails on FPGA platforms:

1) Systems may include more than one DCR bus.
2) Systems may be native DCR capable and still use memory mapped DCR interface.

This patch provides runtime support based on the device trees for the
case where CONFIG_PPC_DCR_MMIO and CONFIG_PPC_DCR_NATIVE are both
selected.  Previously, this was a poorly defined configuration, which
happened to provide NATIVE support.  The runtime selection is made
based on the dcr-controller having a 'dcr-access-method' attribute
in the device tree.  If only one of the above options is selected,
then the code uses #defines to select only the used code in order to
avoid introducing overhead in existing usage.

Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-29 07:06:56 -05:00
Olof Johansson
732bee4c85 [POWERPC] pasemi: update pasemi_defconfig, enable electra_cf
Refresh pasemi_defconfig and enable ELECTRA_CF=y.

Signed-off-by: Olof Johansson <olof@lixom.net>
2008-05-27 16:11:13 -05:00
Paul Mackerras
acf464817d Merge branch 'merge' into powerpc-next 2008-05-23 16:53:23 +10:00
Stephen Rothwell
06a901c562 [POWERPC] mpic: Fix use of uninitialized variable
Compiling ppc64_defconfig with gcc 4.3 gives thes warnings:

arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_get_priority':
arch/powerpc/sysdev/mpic.c:1351: warning: 'is_ipi' may be used uninitialized in this function
arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_set_priority':
arch/powerpc/sysdev/mpic.c:1328: warning: 'is_ipi' may be used uninitialized in this function

It turns out that in the cases where is_ipi is uninitialized, another
variable (mpic) will be NULL and it is dereferenced.  Protect against
this by returning if mpic is NULL in mpic_irq_set_priority, and removing
mpic_irq_get_priority completely as it has no in tree callers.

This has the nice side effect of making the warning go away.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 16:15:37 +10:00
Michael Ellerman
d1e8d50d5a [POWERPC] Add kernstart_addr to list of allowed symbols in prom_init
Since commit "85xx: Add support for relocatable kernel (and
booting at non-zero)" (37dd2badcfcec35f5e21a0926968d77a404f03c3),
PHYSICAL_START is #defined as kernstart_addr if RELOCATABLE
and FLATMEM is enabled.

PHYSICAL_START is used in prom_init.c and so kernstart_addr
needs to be added to the list of allowed symbols that
prom_init.c can access.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 16:15:35 +10:00
David Gibson
46a7417963 [POWERPC] Fix __set_fixmap() for STRICT_MM_TYPECHECKS
__set_fixmap() in pgtable_32.c currently fails to compile if
STRICT_MM_TYPECHECKS is defined.  This fixes it.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 16:15:32 +10:00
Geoff Levand
ecc240f90b [POWERPC] PS3: Fix memory hotplug
A change was made to walk_memory_resource() in commit
4b119e21d0c66c22e8ca03df05d9de623d0eb50f that added a
check of find_lmb().  Add the coresponding lmb_add()
call to ps3_mm_add_memory() so that that check will
succeed.

This fixes the condition where the PS3 boots up with
only the 128 MiB of boot memory, and doesn't see the
other 128MiB that is available.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 16:15:29 +10:00
Michael Ellerman
80d267f9ae [POWERPC] Remove unnecessary cast in arch_deref_entry_point()
func_descr_t->entry is already an unsigned long.  Mea culpa.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 15:27:31 +10:00
Michael Ellerman
72cac213fd [POWERPC] Add debugging trigger to Axon MSI code
This adds some debugging code to the Axon MSI driver.  It creates a
file per MSIC in /sys/kernel/debug/powerpc, which allows the user to
trigger a fake MSI interrupt by writing to the file.

This can be used to test some of the MSI generation path.  In
particular, that the MSIC recognises a write to the MSI address,
generates an interrupt and writes the MSI packet into the ring buffer.

All the code is inside #ifdef DEBUG so it causes no harm unless it's
enabled.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 15:27:28 +10:00
Kumar Gala
475ca391b4 [POWERPC] mpic: Deal with bogus NIRQ in Feature Reporting Register
Some chips (like the SoCs from Freescale) report the wrong value in NIRQ
and this causes issues if its doesn't match or exceed the value of
irq_count.

Add a flag that board code can set to just use irq_count instead of
FRR[NIRQ].  Eventually we'll add a device tree property with the number
of sources.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 15:27:26 +10:00
Roland McGrath
2ca7633dc7 [POWERPC] Tweak VDSO linker script to avoid upsetting old binutils
This works around bugs in older binutils' objcopy.
The placement of these sections does not really matter,
but it confused the buggy old BFD libraries.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-23 15:27:23 +10:00
Linus Torvalds
bca39da564 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Update defconfigs for desktop/server systems
  [POWERPC] Fix mpc8377_mds.dts DMA nodes to match spec
  [POWERPC] Update arch/powerpc/boot/.gitignore
  [POWERPC] Remove generated files on make clean
  [POWERPC] powerpc/mm/hash_low_32.S: Remove CVS keyword
  [POWERPC] Update Cell MAINTAINERS entry, add spufs entry
  lmb: Fix compile warning
2008-05-20 08:15:34 -07:00
Paul Mackerras
09c201219b [POWERPC] Update defconfigs for desktop/server systems
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20 20:04:12 +10:00
Paul Mackerras
927c258ac6 Merge branch 'for-2.6.26' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge 2008-05-20 19:46:37 +10:00
Kumar Gala
8939700edc [POWERPC] Fix mpc8377_mds.dts DMA nodes to match spec
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-20 00:37:13 -05:00
Kumar Gala
4978757987 [POWERPC] Update arch/powerpc/boot/.gitignore
* Add dtbImage.*
* Added zImage.holly
* Folded zImage.coff.lds into zImage.*lds
* Removed some unused zImage.<foo> ignores

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-20 00:35:29 -05:00
Kumar Gala
b58a457528 [POWERPC] Remove generated files on make clean
dtbImage.* and several zImage. targets get created but never cleaned up.

Also, moved zImage to the clean-files line associated with all other image
results (was previously duplicated).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-20 00:27:19 -05:00
Linus Torvalds
e23a5f6687 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] return to old errno choice in mkdir() et.al.
  [Patch] fs/binfmt_elf.c: fix wrong return values
  [PATCH] get rid of leak in compat_execve()
  [Patch] fs/binfmt_elf.c: fix a wrong free
  [PATCH] avoid multiplication overflows and signedness issues for max_fds
  [PATCH] dup_fd() part 4 - race fix
  [PATCH] dup_fd() - part 3
  [PATCH] dup_fd() part 2
  [PATCH] dup_fd() fixes, part 1
  [PATCH] take init_files to fs/file.c
2008-05-19 16:37:45 -07:00
Adrian Bunk
d3d3d3cdb1 [POWERPC] powerpc/mm/hash_low_32.S: Remove CVS keyword
This removes a CVS keyword that wasn't updated for a long time from a
comment.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-20 09:34:18 +10:00
Josh Boyer
13c501e69c [POWERPC] 4xx: Workaround for CHIP_11 Errata
The PowerPC 440EP, 440GR, 440EPx, and 440GRx chips have an issue that
causes the PLB3-to-PLB4 bridge to wait indefinitely for transaction
requests that cross the end-of-memory-range boundary.  Since the DDR
controller only returns the valid portion of a read request, the bridge
will prevent other PLB masters from completing their transactions.

This implements the recommended workaround for this errata for chips that
use older versions of firmware that do not already handle it.  The last
4KiB of memory are hidden from the kernel to prevent the problem
transactions from occurring.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-05-19 09:36:40 -05:00
Jean Delvare
238a871e41 i2c: Switch pasemi to the new device/driver matching scheme
The old device/driver matching scheme is going away so stop using it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Olof Johansson <olof@lixom.net>
2008-05-18 20:49:40 +02:00
Al Viro
f52111b154 [PATCH] take init_files to fs/file.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-16 17:22:20 -04:00
Stephen Rothwell
09e67ca2c5 [POWERPC] Move of_device_get_modalias to drivers/of
Commit 140b932f8cb6cced10b96860651a198b1b89cbb9 ("Create modalias file
in sysfs for of_platform bus") needs this to avoid breaking the sparc
builds.

Just move the code and add whitespace around some binary operators.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-16 23:22:28 +10:00
Scott Wood
0b2cca804e [POWERPC] Add 6xx-style HID0_SLEEP support.
This adds a function to put a 6xx/7xx/7xxx/83xx family CPU into sleep
mode, and return after an interrupt has occurred.  It expects to be
called with interrupts disabled, and returns with interrupts disabled.
Interrupts are enabled while the processor is asleep, but the interrupt
that wakes the processor is not handled; it is still pending when this
function returns.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-16 23:22:28 +10:00
Paul Mackerras
a560643e21 [POWERPC] Defer processing of interrupts when the CPU wakes from sleep mode
This provides a way to defer processing of an interrupt that wakes the
processor out of sleep mode.  On 32-bit platforms that use an
interrupt to wake the processor, we have to have interrupts enabled in
hardware at the point where we go to sleep, otherwise the processor
will never wake up.  However, because interrupts are logically
disabled at this point, we don't want to process the interrupt
straight away.

This is handled by setting the _TLF_SLEEPING flag.  When we get an
interrupt and _TLF_SLEEPING is set, we firstly clear the MSR_EE
(external interrupt enable) bit in the saved MSR value, and secondly
we then return to the address in the link register, like we do for
_TLF_NAPPING, but without actually handling the interrupt.

Note that this is handled somewhat differently on powerbooks, so this
new code will only be used on non-Apple machines.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-16 23:22:28 +10:00
Paul Mackerras
fcff474ea5 Merge branch 'linux-2.6' into powerpc-next 2008-05-16 23:13:42 +10:00
Ishizaki Kou
7012255aae [POWERPC] cell: Fix section mismatches in io-workarounds code
Fix following warnings:
WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0x9c): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.iowa_register_bus()
WARNING: arch/powerpc/platforms/cell/built-in.o(.devinit.text+0xa4): Section mismatch in reference from the function .cell_setup_phb() to the function .init.text:.io_workaround_init()

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-15 20:49:57 +10:00
FUJITA Tomonori
dfe1e09f22 [POWERPC] spufs: Fix compile error
With CONFIG_VIRT_CPU_ACCOUNTING disabled, I got the following error:

linux-2.6/arch/powerpc/platforms/cell/spufs/file.c: In function 'spu_switch_log_notify':
linux-2.6/arch/powerpc/platforms/cell/spufs/file.c:2542: error: implicit declaration of function 'get_tb'
make[4]: *** [arch/powerpc/platforms/cell/spufs/file.o] Error 1

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-15 20:49:55 +10:00
Benjamin Herrenschmidt
cec08e7a94 [POWERPC] vmemmap fixes to use smaller pages
This changes vmemmap to use a different region (region 0xf) of the
address space, and to configure the page size of that region
dynamically at boot.

The problem with the current approach of always using 16M pages is that
it's not well suited to machines that have small amounts of memory such
as small partitions on pseries, or PS3's.

In fact, on the PS3, failure to allocate the 16M page backing vmmemmap
tends to prevent hotplugging the HV's "additional" memory, thus limiting
the available memory even more, from my experience down to something
like 80M total, which makes it really not very useable.

The logic used by my match to choose the vmemmap page size is:

 - If 16M pages are available and there's 1G or more RAM at boot,
   use that size.
 - Else if 64K pages are available, use that
 - Else use 4K pages

I've tested on a POWER6 (16M pages) and on an iSeries POWER3 (4K pages)
and it seems to work fine.

Note that I intend to change the way we organize the kernel regions &
SLBs so the actual region will change from 0xf back to something else at
one point, as I simplify the SLB miss handler, but that will be for a
later patch.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-15 20:49:25 +10:00
Luke Browning
08fcf1d611 [POWERPC] spufs: Fix pointer reference in find_victim
If victim (not ctx) is in spu_run, add victim to rq.

Signed-off-by: Luke Browning <lukebrowning@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-15 20:47:17 +10:00
Michael Ellerman
541b2755c2 [POWERPC] Fix sparse warnings in arch/powerpc/platforms/pseries
Don't return void in pseries/iommu.c
Make mce_data_buf static in pseries/ras.c
Make things static in pseries/rtasd.c
Make things static in pseries/setup.c
vtermno may as well be static in platforms/pseries/lpar.c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:32:02 +10:00
Michael Ellerman
3ff1999b2c [POWERPC] pseries/firmware.c should include pseries/pseries.h
The declaration for fw_feature_init() is in pseries.h and
implemented in firmware.c, so the latter should include the
former.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:32:00 +10:00
Michael Ellerman
1c21a2937b [POWERPC] Fix sparse warnings in arch/powerpc/kernel
Make a few things static in lparcfg.c
Make init and exit routines static in rtas_flash.c
Make things static in rtas_pci.c
Make some functions static in rtas.c
Make fops static in rtas-proc.c
Remove unneeded extern for do_gtod in smp.c
Make clocksource_init() static in time.c
Make last_tick_len and ticklen_to_xs static in time.c
Move the declaration of the pvr per-cpu into smp.h
Make kexec_smp_down() and kexec_stack static in machine_kexec_64.c
Don't return void in arch_teardown_msi_irqs() in msi.c
Move declaration of GregorianDay()into asm/time.h

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:59 +10:00
Michael Ellerman
1c8950ff87 [POWERPC] Make cpus_in_xmon static and remove extern mess from hvc_console.c
This is a little messier than I'd like because xmon.h only exists
on powerpc and we can't have a static inline and an extern declaration
visible at the same time.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:57 +10:00
Michael Ellerman
9f1067c2d9 [POWERPC] Fix sparse warnings in xmon.c
warning: Using plain integer as NULL pointer
warning: Using plain integer as NULL pointer
warning: symbol 'excprint' was not declared. Should it be static?
warning: symbol 'prregs' was not declared. Should it be static?
warning: symbol 'cacheflush' was not declared. Should it be static?
warning: symbol 'read_spr' was not declared. Should it be static?
warning: symbol 'write_spr' was not declared. Should it be static?
warning: symbol 'super_regs' was not declared. Should it be static?
warning: symbol 'mread' was not declared. Should it be static?
warning: symbol 'mwrite' was not declared. Should it be static?
warning: symbol 'byterev' was not declared. Should it be static?
warning: symbol 'memex' was not declared. Should it be static?
warning: symbol 'bsesc' was not declared. Should it be static?
warning: symbol 'dump' was not declared. Should it be static?
warning: symbol 'prdump' was not declared. Should it be static?
warning: symbol 'generic_inst_dump' was not declared. Should it be static?
warning: symbol 'ppc_inst_dump' was not declared. Should it be static?
warning: symbol 'memops' was not declared. Should it be static?
warning: symbol 'memdiffs' was not declared. Should it be static?
warning: symbol 'memlocate' was not declared. Should it be static?
warning: symbol 'memzcan' was not declared. Should it be static?
warning: symbol 'proccall' was not declared. Should it be static?
warning: symbol 'scannl' was not declared. Should it be static?
warning: symbol 'hexdigit' was not declared. Should it be static?
warning: symbol 'flush_input' was not declared. Should it be static?
warning: symbol 'inchar' was not declared. Should it be static?
warning: symbol 'take_input' was not declared. Should it be static?
warning: symbol 'xmon_init' was not declared. Should it be static?

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:55 +10:00
Michael Ellerman
af3b74df1b [POWERPC] Move xmon_irq() declaration into xmon.h
The typdef for irqreturn_t was moved into its own header a
while back, so there's no reason we can't move xmon_irq()
into xmon.h now.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:54 +10:00
Michael Ellerman
8fa29d22dc [POWERPC] sysdev/mpic_msi.c should include sysdev/mpic.h
Some of the routines defined in mpic_msi.c are declared mpic.h,
so the former should include the latter.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:50 +10:00
Michael Ellerman
c884116ac3 [POWERPC] Remove duplicate variable definitions in mm/tlb_64.c
Somewhere along the way (e28f7faf05159f1cfd564596f5e6178edba6bd49,
"Four level pagetables for ppc64") we ended up with duplicate
definitions for pte_freelist_cur and pte_freelist_force_free.
Somehow this compiles, but it would be better to just have one
definition for each.

The two definitions we end up with can be static too!

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:49 +10:00
Michael Ellerman
572fb578de [POWERPC] Move declaration of tce variables into mmu-hash64.h
... instead of having extern declarations in a .c file.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:47 +10:00
Michael Ellerman
09de9ff872 [POWERPC] Fix sparse warnings in arch/powerpc/mm
Make two vmemmap helpers static in init_64.c
Make stab variables static in stab.c
Make psize defs static in hash_utils_64.c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:46 +10:00
Michael Ellerman
5f25f06529 [POWERPC] Move declaration of init_bootmem_done into system.h
... instead of having an extern declaration in a .c file.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:44 +10:00
Remi Machet
683307da07 [POWERPC] Create of_buses for MV64x60 devices
For each mv64360 entry in the OpenFirmware database, add the
registration of an of_bus to take care of devices connected to
the MV64x60 asynchronous devices controller.
This change makes it possible for those devices to be detected by
drivers that support the of_platform without having a custom call
for each of them in the board file.

Signed-off-by: Remi Machet <rmachet@slac.stanford.edu>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:41 +10:00
Kumar Gala
663276b7c6 [POWERPC] Set lower flag bits in regs->trap to indicate debug level exception
We use the low bits of regs->trap as flag bits.  We already indicate
critical and machine check level exceptions via this mechanism.  Extend it
to indicate debug level exceptions.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:37 +10:00
Roland McGrath
7a10174eea [POWERPC] Define and use TLF_RESTORE_SIGMASK
Replace TIF_RESTORE_SIGMASK with TLF_RESTORE_SIGMASK and define
our own set_restore_sigmask() function.  This saves the costly
SMP-safe set_bit operation, which we do not need for the sigmask
flag since TIF_SIGPENDING always has to be set too.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:33 +10:00
Roel Kluin
9d5f525b86 [POWERPC] mpic_u3msi: Failed allocation unnoticed
bitmap_find_free_region(), called by mpic_msi_alloc_hwirqs() may return
signed, but hwirq is unsigned.  A failed allocation remains unnoticed.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:25 +10:00
Roel Kluin
ee1a08f963 [POWERPC] mpic_pasemi_msi: Failed allocation unnoticed
bitmap_find_free_region(), called by mpic_msi_alloc_hwirqs() may return
signed, but hwirq is unsigned.  A failed allocation remains unnoticed.

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-14 22:31:20 +10:00
Jeremy McNicoll
bfd123bf91 [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting
The following adds local bus, flash and MTD partition nodes for
sbc8548. As well, a compatible field for the soc node, so that
of_platform_bus_probe() will pick it up.

Something that is provided through this newly added epld node
is the Hardware Revision which is now being utilized.

Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00
Andy Fleming
73f5b8f942 [POWERPC] 85xx: Fix some sparse warnings for 85xx MDS
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-13 08:53:48 -05:00