IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There is a problem when another module (e.g. nvmet) takes a reference on
the nvme block device and the physical nvme drive is removed. In that
case nvme_free_ctrl() will not be called and the controller state will be
"deleting" or "dead" unless nvmet module releases the block device.
Later on, the same nvme drive probes back and nvme_init_subsystem() will
be called and fail due to duplicate subnqn (if the nvme device doesn't
support subsystem with multiple controllers). This will cause a probe
failure. This commit changes the check of multiple controllers support
at nvme_init_subsystem() by not counting all the controllers at "dead" or
"deleting" state (this is safe because controllers at this state will
never be active again).
Fixes: ab9e00cc72 ("nvme: track subsystems")
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The block device is backed by the transport so we must ensure that the
transport driver will not be removed until all references are released.
Otherwise, we might end up referencing freed memory.
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When the io queues setup or tagset allocation failed, ctrl.tagset is
NULL. But the scan work will still be queued and executed, then panic
comes up due to NULL pointer reference of ctrl.tagset.
To fix this, add a new ctrl state NVME_CTRL_ADMIN_ONLY to inidcate only
admin queue is live. When non io queues or tagset allocation failed, ctrl
enters into this state, scan work will not be started. But async event
work and nvme dev ioctl will be still available. This will be helpful to
do further investigation and recovery.
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When an NVMe controller reports RTD3 Entry Latency larger than the value
of shutdown_timeout module parameter, we update the shutdown_timeout
accordingly to honor RTD3 Entry Latency. Use an informational debug level
instead of a warning level for it.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The ns->head is always valid, so we don't need to check for NULL.
Reported-by: Dan Carpenter <dan.caprenter@oracle.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This fixes using the NULL 'head' before getting the reference. It is
however possible the head will always be NULL, so this patch uses the
struct nvme_ns to get the ns_id field.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
"uuid" must be invisible if both ns->uuid and ns->nguid are unset,
not if either one is.
Fixes: d934f9848a "nvme: provide UUID value to userspace"
Signed-off-by: Martin Wilck <mwilck@suse.com>
[hch: rebased to the nvme-4.15 tree to help resolving a conflict]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We should be exposing the subsystem attributes like 'model' and
'subsysnqn' to sysfs to allow for easier identification of the
subsystem.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When creating nvme multipath devices we should populate the 'slaves' and
'holders' directorys properly to aid userspace topology detection.
Signed-off-by: Hannes Reinecke <hare@suse.com>
[hch: split from a larger patch, compile fix for CONFIG_NVME_MULTIPATH=n]
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We do this by adding a helper that returns the ns_head for a device that
can belong to either the per-controller or per-subsystem block device
nodes, and otherwise reuse all the existing code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds native multipath support to the nvme driver. For each
namespace we create only single block device node, which can be used
to access that namespace through any of the controllers that refer to it.
The gendisk for each controllers path to the name space still exists
inside the kernel, but is hidden from userspace. The character device
nodes are still available on a per-controller basis. A new link from
the sysfs directory for the subsystem allows to find all controllers
for a given subsystem.
Currently we will always send I/O to the first available path, this will
be changed once the NVMe Asynchronous Namespace Access (ANA) TP is
ratified and implemented, at which point we will look at the ANA state
for each namespace. Another possibility that was prototyped is to
use the path that is closes to the submitting NUMA code, which will be
mostly interesting for PCI, but might also be useful for RDMA or FC
transports in the future. There is not plan to implement round robin
or I/O service time path selectors, as those are not scalable with
the performance rates provided by NVMe.
The multipath device will go away once all paths to it disappear,
any delay to keep it alive needs to be implemented at the controller
level.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce a new struct nvme_ns_head that holds information about an actual
namespace, unlike struct nvme_ns, which only holds the per-controller
namespace information. For private namespaces there is a 1:1 relation of
the two, but for shared namespaces this lets us discover all the paths to
it. For now only the identifiers are moved to the new structure, but most
of the information in struct nvme_ns should eventually move over.
To allow lockless path lookup the list of nvme_ns structures per
nvme_ns_head is protected by SRCU, which requires freeing the nvme_ns
structure through call_srcu.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows us to manage the various uniqueue namespace identifiers
together instead needing various variables and arguments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds a new nvme_subsystem structure so that we can track multiple
controllers that belong to a single subsystem. For now we only use it
to store the NQN, and to check that we don't have duplicate NQNs unless
the involved subsystems support multiple controllers.
Includes code originally from Hannes Reinecke to expose the subsystems
in sysfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Several block layer and NVMe core functions accept a combination
of BLK_MQ_REQ_* flags through the 'flags' argument but there is
no verification at compile time whether the right type of block
layer flags is passed. Make it possible for sparse to verify this.
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: linux-nvme@lists.infradead.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This will give udev a chance to observe and handle asynchronous event
notifications and clear the log to unmask future events of the same type.
The driver will create a change uevent of the asyncronuos event result
before submitting the next AEN request to the device if a completed AEN
event is of type error, smart, command set or vendor specific,
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Async event work is for core use only and should not be called directly
from drivers.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The driver can handle tracking only one AEN request, so this patch
removes handling for multiple ones.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All the transports were unnecessarilly duplicating the AEN request
accounting. This patch defines everything in one place.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix print formatting, but keep the original output to prevent user
breakage as suggested by Joe Perches.
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copy subnqns using NVMF_NQN_SIZE as it is < 256
Signed-off-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The NVMe standard provides a command effects log page so the host may
be aware of special requirements it may need to do for a particular
command. For example, the command may need to run with IO quiesced to
prevent timeouts or undefined behavior, or it may change the logical block
formats that determine how the host needs to construct future commands.
This patch saves the nvme command effects log page if the controller
supports it, and performs appropriate actions before and after an admin
passthrough command is completed. If the controller does not support the
command effects log page, the driver will define the effects for known
opcodes. The nvme format and santize are the only commands in this patch
with known effects.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
And fix the warning on a successful firmware log.
Reviewed-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update the check in nvme_setup_rw for missing metadata so that it is
together with the other metadata handling, does not contain impossible
to reach conditions and warns if we get an impossible requests for
a (non-PI) metadata-enabled namespace when CONFIG_BLK_DEV_INTEGRITY
is not set.
Also add a little helper that checks if a given metadata configuration
contains protection information
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Javier González <jg@lightnvm.io>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out the code that applies the calculate value to a given disk/queue
into new helper that can be reused by the multipath code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't need a frozen queue to update the chunk_size, which just is a
hint, and moving it a little earlier will allow for some better code
reuse with the multipath code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To allow reusing this function for the multipath node.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To allow reusing this function for the multipath node.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is safe because the queue is always frozen when we revalidate, and
it simplifies both the existing code as well as the multipath
implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With multipath we don't want a hard DNR bit on a request that is cancelled
by a controller reset, but instead want to be able to retry it on another
patch. To archive this don't always set the DNR bit when the queue is
dying in nvme_cancel_request, but defer that decision to
nvme_req_needs_retry. Note that it applies to any command there and not
just cancelled commands, but one the queue is dying that is the right
thing to do anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Transport will typically transition from LIVE to RESETTING when initially
performing a reset or recovering from an error. Adding this transition
allows a transport to transition to RECONNECTING when it checks/waits for
connectivity then creates new transport connections and reinits the
controller.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Prevent racing controller reset and delete flows. reset_work must not
ever self-requeue so flushing it suffices.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
No change in behavior except that the FC code cancels two work items a
little later now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Move the ->delete_work and the associated helpers to common code instead
of duplicating them in every driver. This also adds the missing reference
get/put for the loop driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Revalidating the disk needs to set the logical block format and capacity,
otherwise it can't figure out if the users modified anything about
the namespace.
Fixes: cdbff4f26b ("nvme: remove nvme_revalidate_ns")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a much more sensible check than just the admin queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@rimbeg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Use the core chrdev code to set up the link between the character device
and the nvme controller. This allows us to get rid of the global list
of all controllers, and also ensures that we have both a reference to
the controller and the transport module before the open method of the
character device is called.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sgi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Instead of allocating a separate struct device for the character device
handle embedd it into struct nvme_ctrl and use it for the main controller
refcounting. This removes double refcounting and gets us an automatic
reference for the character device operations. We keep ctrl->device as a
pointer for now to avoid chaning printks all over, but in the future we
could look into message printing helpers that take a controller structure
similar to what other subsystems do.
Note the delete_ctrl operation always already has a reference (either
through sysfs due this change, or because every open file on the
/dev/nvme-fabrics node has a refernece) when it is entered now, so we
don't need to do the unless_zero variant there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Now that we are protected against lookup vs free races for the namespace
by using kref_get_unless_zero we don't need the hack of NULLing out the
disk private data during removal.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
For kref_get_unless_zero to protect against lookup vs free races we need
to use it in all places where we aren't guaranteed to already hold a
reference. There is no such guarantee in nvme_find_get_ns, so switch to
kref_get_unless_zero in this function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Switch to the ida_simple_* helpers instead of opencoding them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Move blk_mq_reinit_tagset from blk-mq to nvme core
as the only user of it. Current transports that use
it (rdma, fc) simply implement .reinit_request op.
This patch does not change any functionality.
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We can just use our normal ioctl handler for the compat case and remove
the boilerplate code for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
The underlying blk_mq_tag_set, and request timeout parameters support an
unsigned int. Extend the size of the nvme module parameters for io and
admin commands to match.
Signed-off-by: Marc Olson <marcolso@amazon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
"uuid" must be invisible if both ns->uuid and ns->nguid are unset,
not if either one is.
Fixes: d934f9848a "nvme: provide UUID value to userspace"
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
async_event_work might race as it is executed from two different
workqueues at the moment.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the nvme_req_needs_retry() applies several checks to see if
a retry is allowed. On of those is whether the current time has exceeded
the start time of the io plus the timeout length. This check, if an io
times out, means there is never a retry allowed for the io. Which means
applications see the io failure.
Remove this check and allow the io to timeout, like it does on other
protocols, and retries to be made.
On the FC transport, a frame can be lost for an individual io, and there
may be no other errors that escalate for the connection/association.
The io will timeout, which causes the transport to escalate into creating
a new association, but the io that timed out, due to this retry logic, has
already failed back to the application and things are hosed.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an nvme async_event command completes, in most cases, a new
async event is posted. However, if the controller enters a
resetting or reconnecting state, there is nothing to block the
scheduled work element from posting the async event again. Nor are
there calls from the transport to stop async events when an
association dies.
In the case of FC, where the association is torn down, the aer must
be aborted on the FC link and completes through the normal job
completion path. Thus the terminated async event ends up being
rescheduled even though the controller isn't in a valid state for
the aer, and the reposting gets the transport into a partially torn
down data structure.
It's possible to hit the scenario on rdma, although much less likely
due to an aer completing right as the association is terminated and
as the association teardown reclaims the blk requests via
nvme_cancel_request() so its immediate, not a link-related action
like on FC.
Fix by putting controller state checks in both the async event
completion routine where it schedules the async event and in the
async event work routine before it calls into the transport. It's
effectively a "stop_async_events()" behavior. The transport, when
it creates a new association with the subsystem will transition
the state back to live and is already restarting the async event
posting.
Signed-off-by: James Smart <james.smart@broadcom.com>
[hch: remove taking a lock over reading the controller state]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
