IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
With the new omap_prm driver added unconditionally, omap2 builds
fail when the reset controller subsystem is disabled:
drivers/soc/ti/omap_prm.o: In function `omap_prm_probe':
omap_prm.c:(.text+0x2d4): undefined reference to `devm_reset_controller_register'
Link: https://lore.kernel.org/r/20191216132132.3330811-1-arnd@arndb.de
Fixes: 3e99cb214f03 ("soc: ti: add initial PRM driver with reset control support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Selecting RESET_CONTROLLER is actually required, otherwise we
can get a link failure in the clock driver:
drivers/clk/davinci/psc.o: In function `__davinci_psc_register_clocks':
psc.c:(.text+0x9a0): undefined reference to `devm_reset_controller_register'
drivers/clk/davinci/psc-da850.o: In function `da850_psc0_init':
psc-da850.c:(.text+0x24): undefined reference to `reset_controller_add_lookup'
Link: https://lore.kernel.org/r/20191210195202.622734-1-arnd@arndb.de
Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5")
Cc: <stable@vger.kernel.org> # v5.4
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Here are few fixes for v5.5-rc cycle:
- Two corner case fixes related to ti-sysc driver clock issues
- Fixes for am57xx dts for pcie gpios
- Beagle-x15 regulator dts fix
- Fix for wkup_m3_ipc driver race
-----BEGIN PGP SIGNATURE-----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=kjYS
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.5-rc cycle
Here are few fixes for v5.5-rc cycle:
- Two corner case fixes related to ti-sysc driver clock issues
- Fixes for am57xx dts for pcie gpios
- Beagle-x15 regulator dts fix
- Fix for wkup_m3_ipc driver race
* tag 'omap-for-v5.5/fixes-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot
ARM: dts: beagle-x15-common: Model 5V0 regulator
ARM: dts: am571x-idk: Fix gpios property to have the correct gpio number
ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes
bus: ti-sysc: Fix iterating over clocks
ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap
Link: https://lore.kernel.org/r/pull-1578418121-413328@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The register blocks don't occupy 4K. In fact, some blocks are packed
close to others and assuming they're 4K causes overlaps:
pxa2xx-i2c d4033800.i2c: can't request region for resource
[mem 0xd4033800-0xd40347ff]
Link: https://lore.kernel.org/r/20191220071443.247183-1-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
This was done because the clock driver returned the wrong rate, which is
fixed in "clk: mmp2: Fix the order of timer mux parents" patch.
Link: https://lore.kernel.org/r/20191218190454.420358-2-lkundrak@v3.sk
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19
connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator
which is connected to the COMQ port. Model 5V0 regulator here in order
for it to be used in am57xx-evm to model 3V6 regulator.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
commit d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for
EP mode") while adding the dt node for EP mode for DRA7 platform,
added rc node for am571x-idk and populated gpios property with
"gpio3 23". However the GPIO_PCIE_SWRST line is actually connected
to "gpio5 18". Fix it here. (The patch adding "gpio3 23" was tested
with another am57x board in EP mode which doesn't rely on reset from
host).
Cc: stable <stable@vger.kernel.org> # 4.14+
Fixes: d23f3839fe97d8dce03d ("ARM: dts: DRA7: Add pcie1 dt node for EP mode")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
I didn't get a batch in this weekend, so here's what we queued up last
week and today.
- A couple of defconfigs add back debugfs -- it used to be implicitly
enabled through CONFIG_TRACING, but 0e4a459f56c32d3e ("tracing: Remove
unnecessary DEBUG_FS dependency") removed that.
- The rest are mostly minor fixlets of the usual kind; some DT tweaks,
a headerfile refactor that needs a build fix now, etc.
-----BEGIN PGP SIGNATURE-----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=cr5E
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"I didn't get a batch in this weekend, so here's what we queued up last
week and today.
- A couple of defconfigs add back debugfs -- it used to be implicitly
enabled through CONFIG_TRACING, but 0e4a459f56c32d3e ("tracing:
Remove unnecessary DEBUG_FS dependency") removed that.
- The rest are mostly minor fixlets of the usual kind; some DT
tweaks, a headerfile refactor that needs a build fix now, etc"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: bcm: Add missing sentinel to bcm2711_compat[]
ARM: shmobile: defconfig: Restore debugfs support
bus: ti-sysc: Fix missing reset delay handling
ARM: imx: Fix boot crash if ocotp is not found
ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
ARM: dts: imx6ul-evk: Fix peripheral regulator
arm64: dts: ls1028a: fix reboot node
ARM: mmp: include the correct cputype.h
ARM: dts: am437x-gp/epos-evm: fix panel compatible
arm64: dts: ls1028a: fix typo in TMU calibration data
ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs
ARM: dts: bcm283x: Fix critical trip point
ARM: omap2plus_defconfig: Add back DEBUG_FS
ARM: omap2plus_defconfig: enable NET_SWITCHDEV
ARM: dts: am335x-sancloud-bbe: fix phy mode
bus: ti-sysc: Fix missing force mstandby quirk handling
reset: Do not register resource data for missing resets
reset: Fix {of,devm}_reset_control_array_get kerneldoc return types
reset: brcmstb: Remove resource checks
dt-bindings: reset: Fix brcmstb-reset example
...
We must bail out early if the clock is not hw_omap. Otherwise we will
try to access invalid address with hwclk->clkdm_name:
Unable to handle kernel paging request at virtual address ffffffff
Internal error: Oops: 27 [#1] ARM
...
(strcmp) from [<c011b348>] (clkdm_lookup+0x40/0x60)
[<c011b348>] (clkdm_lookup) from [<c011cb84>] (ti_sysc_clkdm_init+0x5c/0x64)
[<c011cb84>] (ti_sysc_clkdm_init) from [<c03680a8>] (sysc_probe+0x948/0x117c)
[<c03680a8>] (sysc_probe) from [<c03d0af4>] (platform_drv_probe+0x48/0x98)
...
Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain handling")
Signed-off-by: Tony Lindgren <tony@atomide.com>
5.5-rc1, please pull the following:
- H. Nikolaus adds a missing sentinel entry to the BCM2711 machine
descriptor compatible array which would make multiplatform kernels fail
to boot
-----BEGIN PGP SIGNATURE-----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=1quG
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs machine fixes for
5.5-rc1, please pull the following:
- H. Nikolaus adds a missing sentinel entry to the BCM2711 machine
descriptor compatible array which would make multiplatform kernels fail
to boot
* tag 'arm-soc/for-5.5/soc-fixes' of https://github.com/Broadcom/stblinux:
ARM: bcm: Add missing sentinel to bcm2711_compat[]
Link: https://lore.kernel.org/r/20191216035701.15534-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Restore debugfs support in exynos_defconfig (as now it is not
selected as dependency of tracing). Debugfs is required by systemd
and several tests.
2. Maintainers updates.
-----BEGIN PGP SIGNATURE-----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=xoio
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung fixes for v5.5
1. Restore debugfs support in exynos_defconfig (as now it is not
selected as dependency of tracing). Debugfs is required by systemd
and several tests.
2. Maintainers updates.
* tag 'samsung-fixes-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Restore debugfs support
MAINTAINERS: Include Samsung SoC serial driver in Samsung SoC entry
MAINTAINERS: Update Lukasz Luba's email address
Link: https://lore.kernel.org/r/20191215121316.32091-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
- Restore debugfs support
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXfObQQAKCRCKwlD9ZEnx
cGLCAP9uIY5rCoFPD6KdQMfM/Gk5Q9Li4UHlJrjVWe927W3dMAEA66yIbVCjWFUo
h8aqYuTK5ZUOzrlGESFuSDlWBqWhjww=
=bN4i
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v5.5
- Restore debugfs support
* tag 'renesas-fixes-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Restore debugfs support
Link: https://lore.kernel.org/r/20191213213719.18122-1-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
commit 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC")
breaks boot of many other platforms (e.g. OMAP or i.MX6) if
CONFIG_ARCH_BCM2835 is enabled in addition to some multiplatform
config (e.g. omap2plus_defconfig). The symptom is that the OMAP
based board does not show any activity beyond "Starting Kernel ..."
even with earlycon.
Reverting the mentioned commit makes it work again.
The real fix is to add the missing NULL sentinel to the
bcm2711_compat[] variable-length array.
Fixes: 781fa0a95424 ("ARM: bcm: Add support for BCM2711 SoC")
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Pull crypto fix from Herbert Xu:
"Fix another build problem for Wireguard without Crypto"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm/curve25519 - add arch-specific key generation function
This series of changes contains fixes for issues recently noticed:
- The ti-sysc interconnect target module driver needs fixes for
mstandby quirk handling and reset delay
- We need to configure am335x-sancloud-bbe to use rgmii-id mode because of
the phy changes done earlier
- NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we
must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV
- We are still relying on DEBUG_FS at least for PM configuration, let's
add it back
- We need to update compatible for am437x-gp/epos-evm because of the
recent changes to use generic panels
-----BEGIN PGP SIGNATURE-----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=3muQ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omap variants for v5.5-rc1 cycle
This series of changes contains fixes for issues recently noticed:
- The ti-sysc interconnect target module driver needs fixes for
mstandby quirk handling and reset delay
- We need to configure am335x-sancloud-bbe to use rgmii-id mode because of
the phy changes done earlier
- NET_SWITCHDEV is no longer selected in Kconfig but a dependency and we
must enable CONFIG_NET_SWITCHDEV to have TI_CPSW_SWITCHDEV
- We are still relying on DEBUG_FS at least for PM configuration, let's
add it back
- We need to update compatible for am437x-gp/epos-evm because of the
recent changes to use generic panels
* tag 'omap-for-v5.5/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix missing reset delay handling
ARM: dts: am437x-gp/epos-evm: fix panel compatible
ARM: omap2plus_defconfig: Add back DEBUG_FS
ARM: omap2plus_defconfig: enable NET_SWITCHDEV
ARM: dts: am335x-sancloud-bbe: fix phy mode
bus: ti-sysc: Fix missing force mstandby quirk handling
Link: https://lore.kernel.org/r/pull-1576254925-709310@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Since commit 0e4a459f56c32d3e ("tracing: Remove unnecessary DEBUG_FS
dependency"), CONFIG_DEBUG_FS is no longer auto-enabled. This breaks
booting Debian 9, as systemd needs debugfs:
[FAILED] Failed to mount /sys/kernel/debug.
See 'systemctl status sys-kernel-debug.mount' for details.
[DEPEND] Dependency failed for Local File Systems.
...
You are in emergGive root password for maintenance
(or press Control-D to continue):
Fix this by enabling CONFIG_DEBUG_FS explicitly.
See also commit 18977008f44c66bd ("ARM: multi_v7_defconfig: Restore
debugfs support").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20191209101327.26571-1-geert+renesas@glider.be
- Add missing jedec,spi-nor compatible for imx6ul-14x14-evk board,
so that SPI NOR device can be probed.
- Fix power button of E60K02 board by removing LDORTC2 regulator.
- A couple of fixes on serial number support of i.MX6ULL/ULZ SoCs to
remove the boot regression caused by 8267ff89b713 ("ARM: imx: Add
serial number support for i.MX6/7 SoCs").
- A couple of fixes on LS1028A SoC TMU regarding to calibration data
and reboot register configuration.
- Fix a regression seen on imx6ul-evk board by marking always-on for
the regulator that is shared by many peripherals.
- Explicitly restore CONFIG_DEBUG_FS in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJd8i+oAAoJEFBXWFqHsHzOSDYH/2clV9RTidg9hYqWV5nuMHry
16+S4LYyWEkKgSZwheMbX13+f0UEMLZxQ1/c/oTlJGa95GppEzNq0ydmfZ22mScH
1I1L1t/AfmxiVB6z3HRS0GZk8uIn7CVPe/PBf8tOm+95qEznOOXljykmB2SHLBP3
KVRSx4OIJ1Nb/IBWmPar7tEkNnLAmI77dTvCZFWbaxep5QTmHX4/dff78eghKmwL
CyYJeINpsZt6a+sXOMbD7UBUx4zWKv50QDFToCRdGWJ4o+e1vp6FM+s/D82vC+3A
ZA8cCt9oRxiDAWiwx7gvlpzNVMyLLW3ork7z+a6shtD2Q4BAbStaSNpIXcVKbtI=
=3SH8
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.5:
- Add missing jedec,spi-nor compatible for imx6ul-14x14-evk board,
so that SPI NOR device can be probed.
- Fix power button of E60K02 board by removing LDORTC2 regulator.
- A couple of fixes on serial number support of i.MX6ULL/ULZ SoCs to
remove the boot regression caused by 8267ff89b713 ("ARM: imx: Add
serial number support for i.MX6/7 SoCs").
- A couple of fixes on LS1028A SoC TMU regarding to calibration data
and reboot register configuration.
- Fix a regression seen on imx6ul-evk board by marking always-on for
the regulator that is shared by many peripherals.
- Explicitly restore CONFIG_DEBUG_FS in imx_v6_v7_defconfig.
* tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Fix boot crash if ocotp is not found
ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
ARM: dts: imx6ul-evk: Fix peripheral regulator
arm64: dts: ls1028a: fix reboot node
arm64: dts: ls1028a: fix typo in TMU calibration data
ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs
ARM: dts: e60k02: fix power button
ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing
Link: https://lore.kernel.org/r/20191212122427.GK15858@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
Somehow this was forgotten when Zinc was being split into oddly shaped
pieces, resulting in linker errors. The x86_64 glue has a specific key
generation implementation, but the Arm one does not. However, it can
still receive the NEON speedups by calling the ordinary DH function
using the base point.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The imx_soc_device_init functions tries to fetch the ocotp regmap in
order to soc serial number. If regmap fetch fails then a message is
printed but regmap_read is called anyway and the system crashes.
Failing to lookup ocotp regmap shouldn't be a fatal boot error so check
that the pointer is valid.
Only side-effect of ocotp lookup failure now is that serial number will
be reported as all-zeros which is acceptable.
Cc: stable@vger.kernel.org
Fixes: 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is currently off and that's not desirable: default imx config is
meant to be generally useful for development and debugging.
Running git bisect between v5.4 and v5.5-rc1 finds this started from
commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
Explicit CONFIG_DEBUG_FS=y was earlier removed by
commit c29d541f590c ("ARM: imx_v6_v7_defconfig: Remove unneeded options")
A very similar fix was required before:
commit 7e9eb6268809 ("ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Many peripherals are affected by gpio5/2, not just sensors. One of those
is ethernet phy so network boot is current broken.
Fix by renaming reg_sensors and marking it as "always on". Also add a
comment asking for careful testing if this is to be made dynamic in the
future.
The "peri_3v3" naming is similar to imx6sx-sdb and regulator-name is
same string as in schematics (VPERI_3V3).
Fixes: 09e2b1048954 ("ARM: dts: imx6ul-14x14-evk: Add sensors' GPIO regulator")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
v5.5-rc1, please pull the following:
- Nicolas fixes the SoC's dma-range property to cover the full 1GB
aperture
- Stefan fixes the critical temperature trip point to be set before the
firmware performs thermal throttling
- Florian fixes the BCM5301X and Cygnus MDIO nodes to have corrected
#address-cells and #size-cells properties
-----BEGIN PGP SIGNATURE-----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=+YGV
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.5/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
v5.5-rc1, please pull the following:
- Nicolas fixes the SoC's dma-range property to cover the full 1GB
aperture
- Stefan fixes the critical temperature trip point to be set before the
firmware performs thermal throttling
- Florian fixes the BCM5301X and Cygnus MDIO nodes to have corrected
#address-cells and #size-cells properties
* tag 'arm-soc/for-5.5/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix critical trip point
ARM: dts: Cygnus: Fix MDIO node address/size cells
ARM: dts: bcm2711: fix soc's node dma-ranges
ARM: dts: BCM5301X: Fix MDIO node address/size cells
Link: https://lore.kernel.org/r/20191210205850.12442-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The file was moved, causing a build error:
In file included from /git/arm-soc/arch/arm/mach-mmp/pxa168.c:28:
arch/arm/mach-mmp/pxa168.h:22:10: fatal error: cputype.h: No such file or directory
Include it from the new location.
Link: https://lore.kernel.org/r/20191210203409.2875880-1-arnd@arndb.de
Fixes: 32adcaa010fa ("ARM: mmp: move cputype.h to include/linux/soc/")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
The LCD panel on AM4 GP EVMs and ePOS boards seems to be
osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly
the panel has changed since the early EVMs, or there has been a mistake
with the panel type.
Update the DT files accordingly.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
After the commit 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs")
the kernel doesn't start on i.MX6ULL/ULZ SoC.
Tested on next-20191205.
For i.MX6ULL/ULZ the variable "ocotp_compat" is set to "fsl,imx6ul-ocotp", but with commit
ffbc34bf0e9c ("nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support") and commit
f243bc821ee3 ("ARM: dts: imx6ull: Fix i.MX6ULL/ULZ ocotp compatible") the value
"fsl,imx6ull-ocotp" is already defined and set in device tree...
By setting "ocotp_compat" to "fsl,imx6ull-ocotp" the kernel does boot.
Fixes: 8267ff89b713 ("ARM: imx: Add serial number support for i.MX6/7 SoCs")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
During definition of the CPU thermal zone of BCM283x SoC family there
was a misunderstanding of the meaning "criticial trip point" and the
thermal throttling range of the VideoCore firmware. The latter one takes
effect when the core temperature is at least 85 degree celsius or higher
So the current critical trip point doesn't make sense, because the
thermal shutdown appears before the firmware has a chance to throttle
the ARM core(s).
Fix these unwanted shutdowns by increasing the critical trip point
to a value which shouldn't be reached with working thermal throttling.
Fixes: 0fe4d2181cc4 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency")
removed select for DEBUG_FS but we still need it at least for enabling
deeper idle states for the SoCs.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TI_CPSW_SWITCHDEV definition in Kconfig was changed from "select
NET_SWITCHDEV" to "depends on NET_SWITCHDEV", and therefore it is required
to explicitelly enable NET_SWITCHDEV config option in omap2plus_defconfig.
Fixes: 3727d259ddaf ("arm: omap2plus_defconfig: enable new cpsw switchdev driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The phy mode should be rgmii-id. For some reason, it used to work with
rgmii-txid but doesn't any more.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The MDIO node on Cygnus had an reversed #address-cells and
#size-cells properties, correct those.
Fixes: 40c26d3af60a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY")
Reported-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Raspberry Pi's firmware has a feature to select how much memory to
reserve for its GPU called 'gpu_mem'. The possible values go from 16MB
to 944MB, with a default of 64MB. This memory resides in the topmost
part of the lower 1GB memory area and grows bigger expanding towards the
begging of memory.
It turns out that with low 'gpu_mem' values (16MB and 32MB) the size of
the memory available to the system in the lower 1GB area can outgrow the
interconnect's dma-range as its size was selected based on the maximum
system memory available given the default gpu_mem configuration. This
makes that memory slice unavailable for DMA. And may cause nasty kernel
warnings if CMA happens to include it.
Change soc's dma-ranges to really reflect it's HW limitation, which is
being able to only DMA to the lower 1GB area.
Fixes: 7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Commit 9f532d26c75c ("ARM: exynos_defconfig: Trim and reorganize with
savedefconfig") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which in turn had been selected by CONFIG_PERF_EVENTS and
CONFIG_PROVE_LOCKING.
In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.
Enable it again explicitly, as debugfs support is essential for various
automated testing tools.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The MDIO node on BCM5301X had an reversed #address-cells and
#size-cells properties, correct those, silencing checker warnings:
.../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected
Reported-by: Simon Horman <simon.horman@netronome.com>
Fixes: 23f1eca6d59b ("ARM: dts: BCM5301X: Specify MDIO bus in the DT")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Currently we add individual copy of same OPP table for each CPU within
the cluster. This is redundant and doesn't reflect the reality.
We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init()
anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online()
->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug
operations. It also may cause issues when the vexpress_spc_cpufreq
driver is built as a module.
Since ve_spc_clk_init is built-in device initcall, we should be able to
use the same topology_core_cpumask to set the opp sharing cpumask via
dev_pm_opp_set_sharing_cpus and use the same later in the driver via
dev_pm_opp_get_sharing_cpus.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The power button was only producing irqs, but no key events,
Forced power down with long key press works, so probably
only a short spike arrives at the SoC.
Further investigation shows that LDORTC2 is off after boot
of the vendor kernel. LDORTC2 is shared with a GPIO at the pmic
which probably transfers the button press to the SoC.
That regulator off at boot, so "regulator-boot-on" is definitively
wrong. So remove that.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Fixes: c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Without this "jedec,spi-nor" compatible property, probing of the SPI NOR
does not work on the NXP i.MX6ULL EVK. Fix this by adding this
compatible property to the DT.
Fixes: 7d77b8505aa9 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration")
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- fix CPU topology setup for SCHED_MC case
- fix VDSO regression
-----BEGIN PGP SIGNATURE-----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=gTck
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- fix CPU topology setup for SCHED_MC case
- fix VDSO regression
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCT
ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC
ARM-based SoCs, please pull the following:
- Nicolas declares a CMA area within the first 1GB of DRAM in order for
it to be guaranteed to reside there, otherwise ARM64's memory
initialization will pick up a CMA area within ZONE_DMA32
- Stefan adds the Device Tree node for the built-in Ethernet controller
(GENET) on the Raspberry Pi 4 model B board
-----BEGIN PGP SIGNATURE-----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=yVJh
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains the second batch of changes for Broadcom
ARM-based SoCs, please pull the following:
- Nicolas declares a CMA area within the first 1GB of DRAM in order for
it to be guaranteed to reside there, otherwise ARM64's memory
initialization will pick up a CMA area within ZONE_DMA32
- Stefan adds the Device Tree node for the built-in Ethernet controller
(GENET) on the Raspberry Pi 4 model B board
* tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711-rpi-4: Enable GENET support
ARM: dts: bcm2711: force CMA into first GB of memory
Link: https://lore.kernel.org/r/20191118182931.11884-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This series of changes contains fixes for few SoC and board specific
issues that would be good to have merged for v5.5-rc1:
- Fix incorrect MMC card detection polarity for omap3-tao3530
- Fix wrong am57xx-beagle-x15 pinmux named states for eMMC
- Fix dra7 cpsw mdio clock that causes wrong speed
- Fix vcsi for droid4 so it won't get turned off after init
- Fix rev and sysconfig register offsets for omap4 sgx so it can idle
Then there are also two minor late changes to logicpd-torpedo-baseboard
to configure 1-wire HDQ for battery stats, and remove out of date
workaround comments no longer needed.
-----BEGIN PGP SIGNATURE-----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=2L5D
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Device tree fixes for omap variants for for v5.5 merge window
This series of changes contains fixes for few SoC and board specific
issues that would be good to have merged for v5.5-rc1:
- Fix incorrect MMC card detection polarity for omap3-tao3530
- Fix wrong am57xx-beagle-x15 pinmux named states for eMMC
- Fix dra7 cpsw mdio clock that causes wrong speed
- Fix vcsi for droid4 so it won't get turned off after init
- Fix rev and sysconfig register offsets for omap4 sgx so it can idle
Then there are also two minor late changes to logicpd-torpedo-baseboard
to configure 1-wire HDQ for battery stats, and remove out of date
workaround comments no longer needed.
* tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix sgx sysconfig register for omap4
ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs
ARM: dts: dra7: fix cpsw mdio fck clock
ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v
ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
ARM: dts: logicpd-torpedo: Remove unnecessary notes/comments
ARM: dts: logicpd-torpedo-baseboard: Enable HDQ
Link: https://lore.kernel.org/r/pull-1574870758-237468@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Just few minor changes that can be merged when suitable, but would
be good to have these in v5.5-rc1 to remove dependencies between branches
for more changes later on in v5.6:
- Add quirk handling for AESS (Audio Engine Sub System)
- We want to drop the useless gptimer option for omap4 as there are local
timers
- A minor error path handling improvment for sysc_child_add_named_clock()
that will make further patching a bit easier
-----BEGIN PGP SIGNATURE-----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=Yb3M
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few ti-sysc related fixes for v5.5 merge window
Just few minor changes that can be merged when suitable, but would
be good to have these in v5.5-rc1 to remove dependencies between branches
for more changes later on in v5.6:
- Add quirk handling for AESS (Audio Engine Sub System)
- We want to drop the useless gptimer option for omap4 as there are local
timers
- A minor error path handling improvment for sysc_child_add_named_clock()
that will make further patching a bit easier
* tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()
ARM: OMAP2+: Drop useless gptimer option for omap4
bus: ti-sysc: Add module enable quirk for audio AESS
Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit fd7d58f0dbc3 ("ARM: multi_v7_defconfig: renormalize based on recent
additions") removed explicit enable line for CONFIG_DEBUG_FS, because
that feature has been selected by other enabled options: CONFIG_TRACING,
which were enabled by CONFIG_PERF_EVENTS.
In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS
dependency") removed the dependency between CONFIG_DEBUG_FS and
CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds.
Enable it again explicitly, as debugfs support is essential for various
automated testing tools.
Link: https://lore.kernel.org/r/20191206125112.11006-1-m.szyprowski@samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
__arch_get_hw_counter() should check clock_mode to see if it can access
CNTVCT. With the conversion to unified vDSO this check has been left out.
This causes on imx v6 and v7 (imx_v6_v7_defconfig) and other platforms to
hang at boot during the execution of the init process as per below:
[ 19.976852] Run /sbin/init as init process
[ 20.044931] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000004
Fix the problem verifying that clock_mode is set coherently before
accessing CNTVCT.
Investigated-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit ca74b316df96 ("arm: Use common cpu_topology structure and
functions.") changed cpu_coregroup_mask() from the ARM32 specific
implementation in arch/arm/include/asm/topology.h to the one shared
with ARM64 and RISCV in drivers/base/arch_topology.c.
Currently on ARM32 (TC2 w/ CONFIG_SCHED_MC) the task scheduler setup
code (w/ CONFIG_SCHED_DEBUG) shows this during CPU hotplug:
ERROR: groups don't span domain->span
It happens to CPUs of the cluster of the CPU which gets hot-plugged
out on scheduler domain MC.
Turns out that the shared cpu_coregroup_mask() requires that the
hot-plugged CPU is removed from the core_sibling mask via
remove_cpu_topology(). Otherwise the 'is core_sibling subset of
cpumask_of_node()' doesn't work. In this case the task scheduler has to
deal with cpumask_of_node instead of core_sibling which is wrong on
scheduler domain MC.
e.g. CPU3 hot-plugged out on TC2 [cluster0: 0,3-4 cluster1: 1-2]:
cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,3-4
^
should be:
cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,4
Add remove_cpu_topology() to __cpu_disable() to remove the CPU from the
topology masks in case of a CPU hotplug out operation.
At the same time tweak store_cpu_topology() slightly so it will call
update_siblings_masks() in case of CPU hotplug in operation via
secondary_start_kernel()->smp_store_cpu_info().
This aligns the ARM32 implementation with the ARM64 one.
Guarding remove_cpu_topology() with CONFIG_GENERIC_ARCH_TOPOLOGY is
necessary since some Arm32 defconfigs (aspeed_g5_defconfig,
milbeaut_m10v_defconfig, spear13xx_defconfig) specify an explicit
# CONFIG_ARM_CPU_TOPOLOGY is not set
w/ ./arch/arm/Kconfig: select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
Fixes: ca74b316df96 ("arm: Use common cpu_topology structure and functions")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.
Link: https://lore.kernel.org/r/20191205211438.27552-2-olof@lixom.net
Signed-off-by: Olof Johansson <olof@lixom.net>
This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned on
for hardware since they were merged, and some refreshed files due to
time having moved a lot of entries around.
-----BEGIN PGP SIGNATURE-----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=rTWJ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
ARM: config: multi_v5: ASPEED SDHCI, SGPIO
ARM: configs: multi_v7: ASPEED network, gpio, FSI
ARM: config: aspeed-g4: Add MMC, and cleanup
ARM: config: aspeed-g5: Add SGPIO and FSI drivers
ARM: config: aspeed-g5: Enable 8250_DW quirks
arm64: defconfig: Change CONFIG_AT803X_PHY from m to y
ARM: shmobile: defconfig: Refresh for v5.4-rc1
arm64: defconfig: Enable R8A77961 SoC
ARM: configs: sunxi: Enable MICREL_PHY
arm64: defconfig: add new Allwinner crypto options
ARM: configs: sunxi: add new Allwinner crypto options
ARM: tegra: Enable Tegra VDE driver in tegra_defconfig
ARM: imx_v6_v7_defconfig: Enable CONFIG_TOUCHSCREEN_DA9052
arm64: defconfig: Enable configs for S32V234
arm64: defconfig: Enable CONFIG_KEYBOARD_IMX_SC_KEY as module
arm64: defconfig: Enable SMMU v3 PMCG
arm64: defconfig: Enable HiSilicon ZIP controller
arm64: defconfig: enable Altera GPIO controller
ARM: multi_v7_defconfig: Enable audio support for stm32mp157
arm64: defconfig: enable rsu driver
...
Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl3pORkPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3FK0P/0EG4lK+il7nE3pd9yIGUjlcYuumIjoxvyC9
9ef202POJLIO3yMlsNyGFR+aOknFO/GtGvDkDFhTtlsGCL40tVzVsyo7ZQo+8mXD
abr+H74NmRXImc+SISYR8X1CD6vEi3oi/no1y5dRzknlBikfsdSLKXJSMYBJ2A6t
DNLwu0h1IZhPk7XQQsxaElG/a9HN8eueMdP20J1IlhOh0GiOwm+rbsLSZNbA/W9m
53XhFs3Ag39SDE0BfXsS+XOWTE7FheZsZk2XQrOwYm9PnxjpIWH7FE2sYsk6uUIc
Pa1b6wB5zlRnxvVHP0m3GXhbTUJDYDK3oybHffI4Mzd0cyZQHC92LhUXFrlTxkaf
6kyhJOTdd5KMlZ2LS7jkwLqb30ieXBPKAREjdbRt6hpvu5P6G+bZQphTEeNAZC61
XnX8mQ/XeoHdoGY5MvS8ht6a1qDF29ebA0/02seicThGK6tS9Qsju6Zo0sg9H1NH
weK6jDuzLq5jpv/LB1apigrDSx+zddRzrwkwy85hR5aWOQhG0xjOoFBProbTS0to
wR46zCEkbGZv4uc0gRuIdp0NR/lguqgDWPeoLluoTqmcpKS6N3RyxD0bWzlvgDFA
fpYxVNKavHneWjfZ7U5RbYXD6jycJcuLaCOs16nrtUbMgJ9pqclLIaZXn7ZTRIuT
RW6NgfZV
=dk7w
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
