IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
The only known devices that use an ov2740 sensor in combination with
the ipu-bridge code are various Lenovo ThinkPad models, which all
need the link-frequency to be 180 MHz for things to work properly.
The ov2740 driver used to only support 360 MHz link-frequency,
which is why the ipu-bridge entry used 360 MHz, but now the
ov2740 driver has been extended to also support 180 MHz.
The ov2740 is actually used with 360 MHz link-frequency on Chromebooks.
On Chromebooks the camera/sensor fwnode graph is part of the ACPI tables.
The ipu-bridge code is used to dynamically generate the graph when it is
missing, so it is not used on Chromebooks and the ov2740 will keep using
360 MHz link-frequency there as before.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Error code is assigned to 'stat', return 'stat' rather than '-1'.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The old (now removed) videobuf framework had an optional vbi hack where
the sequence number of the frame counter was copied in the last 4 bytes
of the buffer. This hack was active only for the read() interface
(so not for streaming I/O), and it was enabled by bttv. This allowed
applications that used read() for the VBI data to match it with the
corresponding video frame.
When bttv was converted to vb2 this hack was forgotten, but some old
applications rely on this.
So add this back, but this time in the bttv driver rather than in the
vb2 framework.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Tested-by: Dr. David Alan Gilbert <dave@treblig.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The start_streaming callback returned 0 or 1 instead of a
proper error code. Fix that.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The subdev .init_cfg() operation is affected by two issues:
- It has long been extended to initialize a whole v4l2_subdev_state
instead of just a v4l2_subdev_pad_config, but its name has stuck
around.
- Despite operating on a whole subdev state and not being directly
exposed to the subdev users (either in-kernel or through the userspace
API), .init_cfg() is categorized as a subdev pad operation.
This participates in making the subdev API confusing for new developers.
Fix it by renaming the operation to .init_state(), and make it a subdev
internal operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net> # for imx415
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # for vimc
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmVsT/geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGUiMH/0dKqVU0d9Dt1OA8
vYX7PZi51piRjYCOBr1jdK2Ovkucmgu48O2/oGlfBHmFkCmMeladRIMDMidS3Z52
2YlILyX5LUUrWfS2441cT/16AVds7VXUZV+8TccalBKLuJHQWVR+ifntSLTihO6c
EcvEBpdy1HO0nSw70rGhipMZm9+K8F+JBYc9ews/3ylexC4AeUzIET69YP9/q+Ne
yYbH0TyJYtm+cDN1IFmyJcJ0CtjdKXGvgNGW6Klq8jJA/aiPn2lRlsGw+0SThkkc
DhVGm5aBYFMP/iIvXNDSKrwHArdTE79d/jiyhlzuThLvaT7aFcpnbP5pD5G4Ds0V
2M+4Faw=
=Qz5G
-----END PGP SIGNATURE-----
Merge tag 'v6.7-rc4' into media_stage
Linux 6.7-rc4
This is needed for a vsp1 fix that upcoming media patches depend on.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The V4L2 subdev .get_fmt() and .set_fmt() pad operation handlers have a
short documentation block that merely duplicates information from the
V4L2 subdev API documentation. They offer no value, and are prone to
bit-rotting as shown by the @cfg parameter documentation being outdated.
Drop them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Recently a WARN_ON was added in v4l2-subdev.c to warn if s_stream was
called unnecessarily. The ivtv driver hits this once when it is loaded for
the first time. Add a bool to avoid this warning.
[hverkuil: added a comment for the sd_video_is_streaming field]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
CC: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Sergey Kozlov <serjk@netup.ru>
CC: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Sergey Kozlov <serjk@netup.ru>
CC: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use vb2_get_num_buffers() to avoid using queue num_buffers field directly.
This allows us to change how the number of buffers is computed in the
future.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
CC: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
min_buffers_needed is already set to 2 so remove this useless
check.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The IVSC has two CSI-2 ports, one receiver and one transmitter, for
passing through the CSI-2 image data. Both have the same number of lanes
and this information should be also present in firmware. Check this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
v4l2_fwnode_endpoint_parse already returns an error value, don't set
return value to -EINVAL.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Set up async notifier right after obtaining the local endpoint. This makes
error handling straightforward.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use v4l2_async_nf_add_fwnode_remote() to add an async fwnode remote
sub-device sub-device to the notifier. This avoids dealing with remote
endpoints.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Clean up the V4L2 async notifier in error handling path, and add label to
unify handling.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The driver parsed, besides its own endpoint on the sink, the remote
upstream endpoint that most likely is a sensor, and took the number of
lanes from that. Instead obtain the number of lanes from the local
endpoint.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This driver fails to build when HAVE_CLK and COMMON_CLK are disabled:
x86_64-linux-ld: vmlinux.o: in function `mgb4_remove':
mgb4_core.c:(.text+0x1915e8c): undefined reference to `clkdev_drop'
x86_64-linux-ld: mgb4_core.c:(.text+0x1915e98): undefined reference to `clk_hw_unregister'
Add a Kconfig dependency to enforce a clean build.
Fixes: 0ab13674a9bd ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
T200 card variants use the XC7A200T FPGA instead of XC7A100T. The SPI FLASH
memory layout is different as the FPGA requires bigger FW images.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=RO+Y
-----END PGP SIGNATURE-----
Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
If the cx NULL pointer check is true, then it reports
an error with CX18_ERR, but that uses cx. Replace it with
pr_err.
Reported by smatch:
drivers/media/pci/cx18/cx18-mailbox.c:834 cx18_vapi() error: we previously assumed 'cx' could be null (see line 833)
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In ipu_bridge_get_ivsc_acpi_dev(), the "ivsc_adev" acpi_device pointer
from the outer loop is handed over to the caller, which takes proper
care of its reference count.
However, the "consumer" acpi_device pointer from the inner loop is lost,
without decrementing its reference count.
Fix this by adding the missing call to acpi_dev_put().
Fixes: c66821f381ae ("media: pci: intel: Add IVSC support for IPU bridge driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Use FIELD_GET() to extract PCIe Negotiated and Maximum Link Width fields
instead of custom masking and shifting.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Digiteq Automotive MGB4 is a modular frame grabber PCIe card for automotive
video interfaces. As for now, two modules - FPD-Link and GMSL - are
available and supported by the driver. The card has two inputs and two
outputs (FPD-Link only).
In addition to the video interfaces it also provides a trigger signal
interface and a MTD interface for FPGA firmware upload.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Some missing select statements were already added back, but I ran into
another one that is missing:
ERROR: modpost: "v4l2_fwnode_endpoint_free" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined!
ERROR: modpost: "v4l2_fwnode_endpoint_alloc_parse" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined!
ERROR: modpost: "v4l2_fwnode_endpoint_parse" [drivers/media/pci/intel/ivsc/ivsc-csi.ko] undefined!
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[Sakari Ailus: Drop V4L2_ASYNC dependency, it is implied now.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The current Kconfig symbol dependencies allow having the following Kconfig
symbol values
CONFIG_IPU_BRIDGE=m
CONFIG_VIDEO_IPU3_CIO2=y
CONFIG_CIO2_BRIDGE=n
This does not work as the IPU bridge API is conditional to
IS_ENABLED(CONFIG_IPU_BRIDGE). Fix this by changing the dependencies so
that CONFIG_IPU_BRIDGE can be separately selected.
The CONFIG_CIO2_BRIDGE symbol becomes redundant as a result and is
removed.
Fixes: 2545a2c02ba1 ("media: ipu3-cio2: allow ipu_bridge to be a module again")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes this compiler warning:
drivers/media/pci/zoran/zoran_card.c: In function 'zoran_probe':
drivers/media/pci/zoran/zoran_card.c:1316:62: warning: '%u' directive output may be truncated writing between 1 and 5 bytes into a region of size between 0 and 31 [-Wformat-truncation=]
1316 | snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]",
| ^~
drivers/media/pci/zoran/zoran_card.c:1316:58: note: directive argument in the range [0, 65535]
1316 | snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]",
| ^~~~~~~~
drivers/media/pci/zoran/zoran_card.c:1316:9: note: 'snprintf' output between 4 and 39 bytes into a destination of size 32
1316 | snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "%s[%u]",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1317 | zr->card.name, zr->id);
| ~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes this compiler warning:
drivers/media/pci/cx18/cx18-driver.c: In function 'cx18_init_struct1':
drivers/media/pci/cx18/cx18-driver.c:688:65: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 11 [-Wformat-truncation=]
688 | snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in",
| ^~
In function 'cx18_create_in_workq',
inlined from 'cx18_init_struct1' at drivers/media/pci/cx18/cx18-driver.c:724:8:
drivers/media/pci/cx18/cx18-driver.c:688:9: note: 'snprintf' output between 4 and 39 bytes into a destination of size 11
688 | snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
689 | cx->v4l2_dev.name);
| ~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Don't populate the arrays on the stack, instead make them static const.
Also add spaces between values to clean up checkpatch style warnings.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There may be some a race condition between timer function
bttv_irq_timeout and bttv_remove. The timer is setup in
probe and there is no timer_delete operation in remove
function. When it hit kfree btv, the function might still be
invoked, which will cause use after free bug.
This bug is found by static analysis, it may be false positive.
Fix it by adding del_timer_sync invoking to the remove function.
cpu0 cpu1
bttv_probe
->timer_setup
->bttv_set_dma
->mod_timer;
bttv_remove
->kfree(btv);
->bttv_irq_timeout
->USE btv
Fixes: 162e6376ac58 ("media: pci: Convert timers to use timer_setup()")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
During probe ivsc ace device, acpi_dev_clear_dependencies() will be
called to clear the consumer and supplier relationship between camera
sensor device and ivsc device. But IPU bridge will setup the connection
swnodes for ivsc device and camera sensor device based on this consumer
and supplier relationship. This patch defers ivsc ace's probe to make
sure IPU bridge is initialized before this consumer and supplier
relationship between camera sensor device and IVSC device is cleared.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Remove name identifier to match the device with the
defined UUID when load driver module.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Remove name identifier to match the device with the
defined UUID when load driver module.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Improve the Kconfig help text to convey the ACE is for changing camera
sensor ownership and CSI for configuring the CSI-2 rx and tx.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Convert list_for_each() to list_for_each_entry() so that the p
list_head pointer and list_entry() call are no longer needed, which
can reduce a few lines of code. No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Do not turn on the vcr_hack based on the btv->field value.
This was a change in the bttv vb2 conversion that caused
green lines at the bottom of the picture in tvtime.
It was originally added to the vb2 conversion based on
faulty information that without this there would be glitches
in the video. However, later tests suggest that this is a
problem in the utilities used to test this since tvtime
behaves fine.
This patch reverts the bttv driver to the original pre-vb2
behavior w.r.t. vcr_hack.
Fixes: b7ec3212a73a ("media: bttv: convert to vb2")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CONFIG_VIDEO_DEV is required by other selected symbols. Depend on it.
Link: https://lore.kernel.org/linux-media/20230828085718.3912335-1-sakari.ailus@linux.intel.com
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Select MEDIA_CONTROLLER, VIDEO_V4L2_SUBDEV_API and V4L2_ASYNC as the IVSC
driver depends on all these.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308170227.ymiFlMbT-lkp@intel.com/
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In commit 9011e49d54dc ("modules: only allow symbol_get of
EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted
to GPL-only marked symbols. This interacts oddly with the DVB logic
which only uses dvb_attach() to load the dvb driver which then uses
symbol_get().
Fix this up by properly marking all of the dvb_attach attach symbols as
EXPORT_SYMBOL_GPL().
Fixes: 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules")
Cc: stable <stable@kernel.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-media@vger.kernel.org
Cc: linux-modules@vger.kernel.org
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmTxzmEACgkQCF8+vY7k
4RWP6A/+Ljbwdoq92qOcaKAG2h2HzJa/H+xKMQwqIYjpbXnjNuFD2S9FCRfhNa9b
Pt4K2g4lH2IJvYiJ3qhBbMxV8GPmovnHFX5LvyTFpRmrtZBAKp+TPXpbPt+a2/WL
IPfQ0I52/c/JNqhm3fnmKgpXorp0wHYNbfY/LXztslimZj95+t0qjW62BoBmsJ3s
hR+j/Xlgnd+9gld1OqX6OndH3mpeqDzBl4KZatQzw6yuIo8SK0ASEpu/vzgZoVy+
WiBtbzMuta2ZghnEHbnCkurwBSU/oLXhBmXsgp+Zdy0gglSk1RBdxM+3O65OVQt3
CCWSXMS0vGOk6JiogMpcPzO5piaUePcHEIjgAaaepTOzbKaf6PbEd9dj73LT9qcx
4TYFtGaDDhyDU4nzKTngfNiwmYrL1h+NuG119ZLHfrdH3MT7itIaydwFJRqLC+6D
7K6/1H2LKq25i+hRp5ZK2pgv0dAJw/nSdwFGFVgWM3Tuyt5dGdL/4SlZO4nIFKF2
pPWJUTJJP/0t9GUtwWmCh1fdgDr0A6Zg5M2OduyhC/YkqyLuD/02Bb4aR8hzloPj
pym+94/PFaT5S7zvKywpvyIc8U+87/M2tw+mAPN2r3i4c0RFJa7CkyKqlKTKFw13
jw7NLLlrRbZ3a3zlhpJVqGLKgF2FlWudLUo4Y4kddWvxTMbwYXs=
=yuz5
-----END PGP SIGNATURE-----
Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913
- new Intel IVSC MEI drivers
- some Mediatek platform drivers were moved to a common location
- Intel atomisp2 driver is now working with the main ov2680 driver. Due
to that, the atomisp2 ov2680 staging one was removed
- the bttv driver was finally converted to videobuf2 framework. This
was the last one upstream using videobuf version 1 core. We'll likely
remove the old videobuf framework on 6.7
- lots of improvements at atomisp driver: it now works with normal I2C
sensors. Several compile-mode dependecies to select between ISP2400
and ISP2401 are now solved in runtime
- a new ipu-bridge logic was added to work with IVSC MEI drivers
- venus driver gained better support for new VPU versions
- the v4l core async framework has gained lots of improvements and
cleanups
- lots of other cleanups, improvements and driver fixes
* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
media: ivsc: Add ACPI dependency
media: bttv: convert to vb2
media: bttv: use audio defaults for winfast2000
media: bttv: refactor bttv_set_dma()
media: bttv: move vbi_skip/vbi_count out of buffer
media: bttv: remove crop info from bttv_buffer
media: bttv: remove tvnorm field from bttv_buffer
media: bttv: remove format field from bttv_buffer
media: bttv: move do_crop flag out of bttv_fh
media: bttv: copy vbi_fmt from bttv_fh
media: bttv: copy vid fmt/width/height from fh
media: bttv: radio use v4l2_fh instead of bttv_fh
media: bttv: replace BUG with WARN_ON
media: bttv: use video_drvdata to get bttv
media: i2c: rdacm21: Fix uninitialized value
media: coda: Remove duplicated include
media: vivid: fix the racy dev->radio_tx_rds_owner
media: i2c: ccs: Check rules is non-NULL
media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
media: i2c: ds90ub953: Fix use of uninitialized variables
...
We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit;
this also involves enabling UML builds of ALSA since that's the
default KUnit test environment which pulls in the addition of some
stubs to the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements
-----BEGIN PGP SIGNATURE-----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=Rr0i
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"
* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmTiDvweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7doH/2Poj73npPKPVfT3
RF8AsgvAj2pLby67rdvwTdFX+exS63SsuwtGGRfAHfGabiwmNN+oT2dLb0aY15bp
nskHnFpcqQ/pfZ2i2rUCenzBX8S9QULvPidLKRaf1FcSdOzqd97Bw5oDPMtzqy/R
Pm+Dzs//7fYvtm69nt6hKW4d6wXxNcg7Fk/QgoJ5Ax9vGvDuZmWXH0ZgBf/5kH04
TTPQNtVX57lf+FHugkhFEn4JbYXvN168b+LuX2PHwOeG/8AIS69Hc0vgvhHNAycT
mmpUI1gWA2jfrJ2RCyyezF/6wy9Ocsp+CbPjfwjuRUxOk0XIm1+cp9Mlz/cRbMsZ
f0tOTpk=
=xrJp
-----END PGP SIGNATURE-----
BackMerge tag 'v6.5-rc7' into drm-next
Linux 6.5-rc7
This is needed for the CI stuff and the msm pull has fixes in it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
The IVSC driver only works in ACPI systems so make it depend on ACPI.
Compiling it elsewhere has little if any value.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This patch converts the solo6x10 driver code to use the new unified
PCM copy callback. It's a straightforward conversion from *_user() to
*_iter() variants. As copy_to_iter() updates the internal offest at
each write, we can drop the dst counter update in the loop, too.
Note that copy_to_iter() returns the copied bytes, hence the error
condition is adjusted accordingly.
Acked-by: Ismael Luceno <ismael@iodev.co.uk>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
Cc: Anton Sviridenko <anton@corp.bluecherry.net>
Cc: Andrey Utkin <andrey_utkin@fastmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Link: https://lore.kernel.org/r/20230815190136.8987-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
