IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
RK3588 can have 10 different device functions, so increase the maximum
amount appropriately. Considering rockchip uses auto-generated pinmux
files, adding a quite complex if construct to increase the limit just
for rk3588 does not seem to be worth the effort.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220504213251.264819-19-sebastian.reichel@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
'gpio-reserved-ranges' property is already used and supported by common pinctrl
bindings, so add it also here to fix warnings like:
qrb5165-rb5.dtb: gpio@c000: 'gpio-reserved-ranges' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220508135932.132378-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
'input-disable' is already used and supported by common pinctrl
bindings, so add it also here to fix warnings like:
arch/arm64/boot/dts/qcom/qrb5165-rb5.dtb: gpio@c000: lt9611-rst-state: 'oneOf' conditional failed, one must be fixed:
'input-disable' does not match any of the regexes: 'pinctrl-[0-9]+'
'function', 'input-disable', 'output-high', 'pins', 'power-source' do not match any of the regexes: '(pinconf|-pins)$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add missing 'gpio-line-names' property and describe its constraints for
all models except PM8226 (which seems not really used).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Matching PMIC GPIOs config nodes within a '-state' node by '.*' pattern
does not work as expected because of linux,phandle in the DTB:
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dtb: gpios@c000: divclk4-state: 'oneOf' conditional failed, one must be fixed:
'pins' is a required property
'function' is a required property
'pinconf' does not match any of the regexes: 'pinctrl-[0-9]+'
[[2]] is not of type 'object'
Make the schema stricter and expect such nodes to be either named
'pinconfig' or followed with '-pins' prefix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220507194913.261121-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pm6125 comes with 9 GPIOs, without holes.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220511220613.1015472-3-marijn.suijten@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add VTM bindings documentation. In the Voltage Thermal
Management Module(VTM), K3 J72XX supplies a voltage
reference and a temperature sensor feature that are gathered in the band
gap voltage and temperature sensor (VBGAPTS) module. The band
gap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517172920.10857-2-j-keerthy@ti.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The Qualcomm SC8280XP platform has three instances of the tsens block,
add a compatible for these instances.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503153436.960184-1-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add compatible for the LMh blocks found in the Qualcomm sc8180x
platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220502164504.3972938-2-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Document RZ/G2UL TSU bindings. The TSU block on RZ/G2UL is identical to one
found on RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-tsu" will be used as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220501081930.23743-1-biju.das.jz@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add compatibility string for the thermal sensors on MSM8960/APQ8064
platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220406002648.393486-2-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add documentation for PMIC5 Gen2 ADC_TM peripheral.
It is used for monitoring ADC channel thresholds for PMIC7-type
PMICs. It is present on PMK8350, like PMIC7 ADC and can be used
to monitor up to 8 ADC channels, from any of the PMIC7 PMICs
on a target, through PBS(Programmable Boot Sequence).
Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1648991869-20899-2-git-send-email-quic_jprakash@quicinc.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Document RZ/V2L TSU bindings. The TSU block on RZ/V2L is identical to one
found on RZ/G2L SoC. No driver changes are required as generic compatible
string "renesas,rzg2l-tsu" will be used as a fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220308212315.4551-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as
well as providing the reference clock on CLK25_REF.
Add DT properties to configure both pins.
Technically the phy also supports a recovered 125MHz clock for
synchronous ethernet. However SyncE should be configured dynamically at
runtime, so it is explicitly omitted in this binding.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull ARM SoC fixes from Arnd Bergmann:
"The SoC bug fixes have calmed down sufficiently, there is one minor
update for the MAINTAINERS file, and few bug fixes for dts
descriptions:
- Updates to the BananaPi R2-Pro (rk3568) dts to match production
hardware rather than the prototype version.
- Qualcomm sm8250 soundwire gets disabled on some machines to avoid
crashes
- A number of aspeed SoC specific fixes, addressing incorrect pin
cotrol settings, some values in the romed8hm board, and a revert
for an accidental removal of a DT node"
* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: omap: remove me as a maintainer
ARM: dts: aspeed: Add video engine to g6
ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
arm64: dts: rockchip: Change io-domains of bpi-r2-pro
This uses anyOf which is wrong. Use oneOf and move the items under the
description. Also drop allOf for $ref.
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/CAE-0n50KE9bkqZvCOLtCGiq3g1jYhK7zpVcVFBzinaguNhNaPw@mail.gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Detailed description for this pull request:
1. Update devfreq core
- Add cpu based scaling support to passive governor. Some device like
cache might require the dynamic frequency scaling. But, it has very
tightly to cpu frequency. So that use passive governor to scale
the frequency according to current cpu frequency.
To decide the frequency of the device, the governor does one of the following:
: Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
: Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
2. Update devfreq driver
- Update rk3399_dmc.c as following:
: Convert dt-binding document to YAML and deprecate unused properties.
: Use Hz units for the device-tree properties of rk3399_dmc.
: rk3399_dmc is able to set the idle time before changing the dmc clock.
Specify idle time parameters by using nano-second unit on dt bidning.
: Add new disable-freq properties to optimize the power-saving feature
of rk3399_dmc.
: Disable devfreq-event device on remove() to fix unbalanced
enable-disable count.
: Use devm_pm_opp_of_add_table()
: Block PMU (Power-Management Unit) transitions when scaling frequency
by ARM Trust Firmware in order to fix the conflict between PMU and DMC
(Dynamic Memory Controller).
-----BEGIN PGP SIGNATURE-----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=/3W8
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Pull devfreq changes for 5.19-rc1 from Chanwoo Choi:
"1. Update devfreq core
- Add cpu based scaling support to passive governor. Some device like
cache might require the dynamic frequency scaling. But, it has very
tightly to cpu frequency. So that use passive governor to scale
the frequency according to current cpu frequency.
To decide the frequency of the device, the governor does one of the following:
: Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
: Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
2. Update devfreq drivers
- Update rk3399_dmc.c as following:
: Convert dt-binding document to YAML and deprecate unused properties.
: Use Hz units for the device-tree properties of rk3399_dmc.
: rk3399_dmc is able to set the idle time before changing the dmc clock.
Specify idle time parameters by using nano-second unit on dt bidning.
: Add new disable-freq properties to optimize the power-saving feature
of rk3399_dmc.
: Disable devfreq-event device on remove() to fix unbalanced
enable-disable count.
: Use devm_pm_opp_of_add_table()
: Block PMU (Power-Management Unit) transitions when scaling frequency
by ARM Trust Firmware in order to fix the conflict between PMU and DMC
(Dynamic Memory Controller)."
* tag 'devfreq-next-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
PM / devfreq: passive: Keep cpufreq_policy for possible cpus
PM / devfreq: passive: Reduce duplicate code when passive_devfreq case
PM / devfreq: Add cpu based scaling support to passive governor
PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
PM / devfreq: rk3399_dmc: Block PMU during transitions
soc: rockchip: power-domain: Manage resource conflicts with firmware
PM / devfreq: rk3399_dmc: Avoid static (reused) profile
PM / devfreq: rk3399_dmc: Use devm_pm_opp_of_add_table()
PM / devfreq: rk3399_dmc: Disable edev on remove()
PM / devfreq: rk3399_dmc: Support new *-ns properties
PM / devfreq: rk3399_dmc: Support new disable-freq properties
PM / devfreq: rk3399_dmc: Use bitfield macro definitions for ODT_PD
PM / devfreq: rk3399_dmc: Drop excess timing properties
PM / devfreq: rk3399_dmc: Drop undocumented ondemand DT props
dt-bindings: devfreq: rk3399_dmc: Add more disable-freq properties
dt-bindings: devfreq: rk3399_dmc: Specify idle params in nanoseconds
dt-bindings: devfreq: rk3399_dmc: Fix Hz units
dt-bindings: devfreq: rk3399_dmc: Deprecate unused/redundant properties
dt-bindings: devfreq: rk3399_dmc: Convert to YAML
Add support for HPE GXP. The GXP is based on the cortex a9 processor and
supports arm7.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add support for the HPE GXP Timer and Watchdog. There are multiple
timers on the SoC but only one is enabled at this time.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
When the binding was converted it appeared necessary to set
'unevaluatedProperties: true' because of the switch devices on the
turris-mox board. Actually the error was because of the reg property
being incorrect causing the rest of the properties to be unevaluated.
After the reg properties are fixed for turris-mox we can set
'unevaluatedProperties: false' as is generally expected.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These interconnects are modeled as clks, not interconnects, therefore
remove the compatibles from the binding as they're unused.
Cc: Alex Elder <elder@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220415005828.1980055-3-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This contains a few fixes for the sc8180x interconnect provider driver to make
it functional.
* icc-sc8180x
dt-bindings: interconnect: Add SC8180X QUP0 virt provider
interconnect: qcom: sc8180x: Modernize sc8180x probe
interconnect: qcom: sc8180x: Fix QUP0 nodes
interconnect: qcom: sc8180x: Mark some BCMs keepalive
Link: https://lore.kernel.org/r/20220503211925.1022169-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add compatible for the QUP0 BCM provider found in SC8180X.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-2-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The PCA85073A RTC has the same programming model as the PCF85063A.
Add a compatible entry for it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220419014445.341444-1-festevam@gmail.com
Convert rockchip,rk3368-cru.txt to YAML.
Changes against original bindings:
- Add clocks and clock-names because the device has to have
at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220329180550.31043-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Convert rockchip,rk3228-cru.txt to YAML.
Changes against original bindings:
Add clocks and clock-names because the device has to have
at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220330121923.24240-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Convert rockchip,rk3036-cru.txt to YAML.
Changes against original bindings:
Add clocks and clock-names because the device has to have
at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220330114847.18633-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Convert rockchip,rk3308-cru.txt to YAML.
Changes against original bindings:
- Add clocks and clock-names because the device has to have
at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220329184339.1134-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
If the ChromeOS board is a detachable, this cros-ec-keyb device won't
have a matrix keyboard but it may have some button switches, e.g. volume
buttons and power buttons. The driver still registers a keyboard though
and that leads to userspace confusion around where the keyboard is.
We tried to work around this by only registering the keyboard device when
rows/columns properties were specified for the device, but that led to
another problem where removing the rows/columns properties breaks the
existing binding. Technically before that commit the rows/columns
properties were required, otherwise the driver would fail to probe.
Removing the properties from devicetrees makes the driver fail to probe
unless the corresponding driver patch is present. Furthermore, this makes
requiring matrix keyboard properties for devices that really have a
keyboard impossible because the compatible drives the schema and now the
properties are optional.
Add a more specific compatible for this type of device that indicates to
the OS that there are only switches and no matrix keyboard present.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220516183452.942008-2-swboyd@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Convert rockchip,px30-cru.txt to YAML.
Changes against original bindings:
Use compatible string: "rockchip,px30-pmucru"
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220330103923.11063-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Current dts files with RK3188/RK3066 'cru' nodes are manually verified.
In order to automate this process rockchip,rk3188-cru.txt has to be
converted to YAML.
Changed:
Add properties to fix notifications by clocks.yaml for example:
clocks
clock-names
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220329111323.3569-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Current dts files with RK3288 'cru' nodes are manually verified.
In order to automate this process rockchip,rk3288-cru.txt has to be
converted to YAML.
Changed:
Add properties to fix notifications by clocks.yaml for example:
clocks
clock-names
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220329113657.4567-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This documentation provides wrong node name for the Ethernet controller.
It should be "ethernet" instead of "smsc" as required by Ethernet
controller devicetree schema:
Documentation/devicetree/bindings/net/ethernet-controller.yaml
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517111505.929722-4-o.rempel@pengutronix.de
Create initial schema for Microchip/SMSC LAN95xx USB Ethernet controllers and
import some of currently supported USB IDs form drivers/net/usb/smsc95xx.c
These devices are already used in some of DTs. So, this schema makes it official.
NOTE: there was no previously documented txt based DT binding for this
controllers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517111505.929722-3-o.rempel@pengutronix.de
Create schema for ASIX USB Ethernet controllers and import some of
currently supported USB IDs form drivers/net/usb/asix_devices.c
These devices are already used in some of DTs. So, this schema makes it official.
NOTE: there was no previously documented txt based DT binding for this
controllers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220517111505.929722-2-o.rempel@pengutronix.de
No properly bus-type for DPI video bus, add bus-type 7 for it.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Convert the old text based dw9807-vcm chip DT bindings to json-schema.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The imx412 like many I2C camera sensors has three voltage rails which
depending on platform may be necessary to switch power onto directly.
Add in as optional rails so as not to break anything for existing users.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
