IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
From: John Fastabend <john.fastabend@gmail.com>
commit 294f2fc6da27620a506e6c050241655459ccd6bd upstream.
Currently, for all op verification we call __red_deduce_bounds() and
__red_bound_offset() but we only call __update_reg_bounds() in bitwise
ops. However, we could benefit from calling __update_reg_bounds() in
BPF_ADD, BPF_SUB, and BPF_MUL cases as well.
For example, a register with state 'R1_w=invP0' when we subtract from
it,
w1 -= 2
Before coerce we will now have an smin_value=S64_MIN, smax_value=U64_MAX
and unsigned bounds umin_value=0, umax_value=U64_MAX. These will then
be clamped to S32_MIN, U32_MAX values by coerce in the case of alu32 op
as done in above example. However tnum will be a constant because the
ALU op is done on a constant.
Without update_reg_bounds() we have a scenario where tnum is a const
but our unsigned bounds do not reflect this. By calling update_reg_bounds
after coerce to 32bit we further refine the umin_value to U64_MAX in the
alu64 case or U32_MAX in the alu32 case above.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158507151689.15666.566796274289413203.stgit@john-Precision-5820-Tower
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5ba14043621f4afdf3ad5f92ee2d8dbebbe4340 upstream.
When pinning a buffer, we should check to see if there are any
additional restrictions imposed by bo->preferred_domains. This will
prevent the BO from being moved to an invalid domain when pinning.
For example, this can happen if the user requests to create a BO in GTT
domain for display scanout. amdgpu_dm will allow pinning to either VRAM
or GTT domains, since DCN can scanout from either or. However, in
amdgpu_bo_pin_restricted(), pinning to VRAM is preferred if there is
adequate carveout. This can lead to pinning to VRAM despite the user
requesting GTT placement for the BO.
v2: Allow the kernel to override the domain, which can happen when
exporting a BO to a V4L camera (for example).
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c441d28945fb113220d48d6c86ebc0b090a2b677 upstream.
This check determines whether a given address is part of
image 0 or image 1. Image 1 starts at offset image0_size,
so that address should be included.
Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511163716.3520591-1-ttabi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cab56b51ec0e69128909cef4650e1907248d821b upstream.
Fix the output of /proc/iomem to show the real hardware device name
including the pa_pathname, e.g. "Merlin 160 Core Centronics [8:16:0]".
Up to now only the pa_pathname ("[8:16.0]") was shown.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd524b7f317de8d31d638cbfdc7be4cf9b770e42 upstream.
Some code paths cannot guarantee the inode have any dentry alias. So
WARN_ON() all !dentry may flood the kernel logs.
For example, when an overlayfs inode is watched by inotifywait (1), and
someone is trying to read the /proc/$(pidof inotifywait)/fdinfo/INOTIFY_FD,
at that time if the dentry has been reclaimed by kernel (such as
echo 2 > /proc/sys/vm/drop_caches), there will be a WARN_ON(). The
printed call stack would be like:
? show_mark_fhandle+0xf0/0xf0
show_mark_fhandle+0x4a/0xf0
? show_mark_fhandle+0xf0/0xf0
? seq_vprintf+0x30/0x50
? seq_printf+0x53/0x70
? show_mark_fhandle+0xf0/0xf0
inotify_fdinfo+0x70/0x90
show_fdinfo.isra.4+0x53/0x70
seq_show+0x130/0x170
seq_read+0x153/0x440
vfs_read+0x94/0x150
ksys_read+0x5f/0xe0
do_syscall_64+0x59/0x1e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
So let's drop WARN_ON() to avoid kernel log flooding.
Reported-by: Hongbo Yin <yinhongbo@bytedance.com>
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Tianci Zhang <zhangtianci.1997@bytedance.com>
Fixes: 8ed5eec9d6c4 ("ovl: encode pure upper file handles")
Cc: <stable@vger.kernel.org> # v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a69e617e533edddf3fa3123149900f36e0a6dc74 upstream.
usbnet uses the work usbnet_deferred_kevent() to perform tasks which may
sleep. On disconnect, completion of the work was originally awaited in
->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic
commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock":
https://git.kernel.org/tglx/history/c/0f138bbfd83c
The change was made because back then, the kernel's workqueue
implementation did not allow waiting for a single work. One had to wait
for completion of *all* work by calling flush_scheduled_work(), and that
could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex
held in ->ndo_stop().
The commit solved one problem but created another: It causes a
use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c,
ax88179_178a.c, ch9200.c and smsc75xx.c:
* If the drivers receive a link change interrupt immediately before
disconnect, they raise EVENT_LINK_RESET in their (non-sleepable)
->status() callback and schedule usbnet_deferred_kevent().
* usbnet_deferred_kevent() invokes the driver's ->link_reset() callback,
which calls netif_carrier_{on,off}().
* That in turn schedules the work linkwatch_event().
Because usbnet_deferred_kevent() is awaited after unregister_netdev(),
netif_carrier_{on,off}() may operate on an unregistered netdev and
linkwatch_event() may run after free_netdev(), causing a use-after-free.
In 2010, usbnet was changed to only wait for a single instance of
usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bfaf
("drivers/net: don't use flush_scheduled_work()").
Unfortunately the commit neglected to move the wait back to
->ndo_stop(). Rectify that omission at long last.
Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/netdev/CAG48ez0MHBbENX5gCdHAUXZ7h7s20LnepBF-pa5M=7Bi-jZrEA@mail.gmail.com/
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/netdev/20220315113841.GA22337@pengutronix.de/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/d1c87ebe9fc502bffcd1576e238d685ad08321e4.1655987888.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cad564ca557f8d3bb3b1fa965d9a2b3f6490ec69 upstream.
The user may use the fbcon=vc:<n1>-<n2> option to tell fbcon to take
over the given range (n1...n2) of consoles. The value for n1 and n2
needs to be a positive number and up to (MAX_NR_CONSOLES - 1).
The given values were not fully checked against those boundaries yet.
To fix the issue, convert first_fb_vc and last_fb_vc to unsigned
integers and check them against the upper boundary, and make sure that
first_fb_vc is smaller than last_fb_vc.
Cc: stable@vger.kernel.org # v4.19+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YpkYRMojilrtZIgM@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5a8aa5d7d80d21ab6b266f1bed4194b61746199 upstream.
If cooling_device_stats_setup() fails to create the stats object, it
must clear the last slot in cooling_device_attr_groups that was
initially empty (so as to make it possible to add stats attributes to
the cooling device attribute groups).
Failing to do so may cause the stats attributes to be created by
mistake for a device that doesn't have a stats object, because the
slot in question might be populated previously during the registration
of another cooling device.
Fixes: 8ea229511e06 ("thermal: Add cooling device's statistics in sysfs")
Reported-by: Di Shen <di.shen@unisoc.com>
Tested-by: Di Shen <di.shen@unisoc.com>
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac6800e279a22b28f4fc21439843025a0d5bf03e upstream.
All creation paths except for O_TMPFILE handle umask in the vfs directly
if the filesystem doesn't support or enable POSIX ACLs. If the filesystem
does then umask handling is deferred until posix_acl_create().
Because, O_TMPFILE misses umask handling in the vfs it will not honor
umask settings. Fix this by adding the missing umask handling.
Link: https://lore.kernel.org/r/1657779088-2242-2-git-send-email-xuyang2018.jy@fujitsu.com
Fixes: 60545d0d4610 ("[O_TMPFILE] it's still short a few helpers, but infrastructure should be OK now...")
Cc: <stable@vger.kernel.org> # 4.19+
Reported-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-and-Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2ebff9c57fe4eb104ce4768f6ebcccf76bef849 upstream.
If something manages to set the maximum file size to MAX_OFFSET+1, this
can cause the xfs and ext4 filesystems at least to become corrupt.
Ordinarily, the kernel protects against userspace trying this by
checking the value early in the truncate() and ftruncate() system calls
calls - but there are at least two places that this check is bypassed:
(1) Cachefiles will round up the EOF of the backing file to DIO block
size so as to allow DIO on the final block - but this might push
the offset negative. It then calls notify_change(), but this
inadvertently bypasses the checking. This can be triggered if
someone puts an 8EiB-1 file on a server for someone else to try and
access by, say, nfs.
(2) ksmbd doesn't check the value it is given in set_end_of_file_info()
and then calls vfs_truncate() directly - which also bypasses the
check.
In both cases, it is potentially possible for a network filesystem to
cause a disk filesystem to be corrupted: cachefiles in the client's
cache filesystem; ksmbd in the server's filesystem.
nfsd is okay as it checks the value, but we can then remove this check
too.
Fix this by adding a check to inode_newsize_ok(), as called from
setattr_prepare(), thereby catching the issue as filesystems set up to
perform the truncate with minimal opportunity for bypassing the new
check.
Fixes: 1f08c925e7a3 ("cachefiles: Implement backing file wrangling")
Fixes: f44158485826 ("cifsd: add file operations")
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@kernel.org
Acked-by: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Steve French <sfrench@samba.org>
cc: Hyunchul Lee <hyc.lee@gmail.com>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74bba640d69914cf832b87f6bbb700e5ba430672 upstream.
The 12,1 model requires the same configuration as the 12,2 model
to enable headphones but has a different codec SSID. Adds
12,1 SSID for matching quirk.
[ re-sorted in SSID order by tiwai ]
Signed-off-by: Allen Ballway <ballway@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220810152701.1.I902c2e591bbf8de9acb649d1322fa1f291849266@changeid
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f83bb2592482fe94c6eea07a8121763c80f36ce5 upstream.
There is another LENOVO 20149 (Type1Sku0) Notebook model with
CX20590, the device PCI SSID is 17aa:3977, which headphones are
not responding, that requires the quirk CXT_PINCFG_LENOVO_NOTEBOOK.
Add the corresponding entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220808073406.19460-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2626206963ace9e8bf92b6eea5ff78dd674c555c upstream.
When injecting a #GP on LLDT/LTR due to a non-canonical LDT/TSS base, set
the error code to the selector. Intel SDM's says nothing about the #GP,
but AMD's APM explicitly states that both LLDT and LTR set the error code
to the selector, not zero.
Note, a non-canonical memory operand on LLDT/LTR does generate a #GP(0),
but the KVM code in question is specific to the base from the descriptor.
Fixes: e37a75a13cda ("KVM: x86: Emulator ignores LDTR/TR extended base on LLDT/LTR")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220711232750.1092012-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec6e4d863258d4bfb36d48d5e3ef68140234d688 upstream.
Wait to mark the TSS as busy during LTR emulation until after all fault
checks for the LTR have passed. Specifically, don't mark the TSS busy if
the new TSS base is non-canonical.
Opportunistically drop the one-off !seg_desc.PRESENT check for TR as the
only reason for the early check was to avoid marking a !PRESENT TSS as
busy, i.e. the common !PRESENT is now done before setting the busy bit.
Fixes: e37a75a13cda ("KVM: x86: Emulator ignores LDTR/TR extended base on LLDT/LTR")
Reported-by: syzbot+760a73552f47a8cd0fd9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Hou Wenlong <houwenlong.hwl@antgroup.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20220711232750.1092012-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6b675687a4ab4dba684716d97c8c6f81bf10905 upstream.
Touch switch state is received through WACOM_PAD_FIELD. However, it
is reported by touch_input. Don't register pad_input if no other pad
events require the interface.
Cc: stable@vger.kernel.org
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4252071b97d2027d246f6a82cbee4d52f618b47 upstream.
Let's have a look at this piece of code in __bread_slow:
get_bh(bh);
bh->b_end_io = end_buffer_read_sync;
submit_bh(REQ_OP_READ, 0, bh);
wait_on_buffer(bh);
if (buffer_uptodate(bh))
return bh;
Neither wait_on_buffer nor buffer_uptodate contain any memory barrier.
Consequently, if someone calls sb_bread and then reads the buffer data,
the read of buffer data may be executed before wait_on_buffer(bh) on
architectures with weak memory ordering and it may return invalid data.
Fix this bug by adding a memory barrier to set_buffer_uptodate and an
acquire barrier to buffer_uptodate (in a similar way as
folio_test_uptodate and folio_mark_uptodate).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc5250cdb43d444061412df7fae72d2b4acbdf97 upstream.
We won't really have enough skbs to need a 64-bit cookie,
and on 32-bit platforms storing the 64-bit cookie into the
void *rate_driver_data doesn't work anyway. Switch back to
using just a 32-bit cookie and uintptr_t for the type to
avoid compiler warnings about all this.
Fixes: 4ee186fa7e40 ("wifi: mac80211_hwsim: fix race condition in pending packet")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Jeongik Cha <jeongik@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58b6259d820d63c2adf1c7541b54cce5a2ae6073 upstream.
The robots report that we're now casting to a differently
sized integer, which is correct, and the previous patch
had erroneously removed it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 4ee186fa7e40 ("wifi: mac80211_hwsim: fix race condition in pending packet")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: Jeongik Cha <jeongik@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ee186fa7e40ae06ebbfbad77e249e3746e14114 upstream.
A pending packet uses a cookie as an unique key, but it can be duplicated
because it didn't use atomic operators.
And also, a pending packet can be null in hwsim_tx_info_frame_received_nl
due to race condition with mac80211_hwsim_stop.
For this,
* Use an atomic type and operator for a cookie
* Add a lock around the loop for pending packets
Signed-off-by: Jeongik Cha <jeongik@google.com>
Link: https://lore.kernel.org/r/20220704084354.3556326-1-jeongik@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffb2759df7efbc00187bfd9d1072434a13a54139 upstream.
When the driver fails in snd_card_register() at probe time, it will free
the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug.
The following log can reveal it:
[ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000]
[ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0
[ 50.729530] Call Trace:
[ 50.732899] bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000]
Fix this by adding usb_kill_urb() before usb_free_urb().
Fixes: b47a22290d58 ("ALSA: MIDI driver for Behringer BCD2000 USB device")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220715010515.2087925-1-zheyuma97@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffcf9c5700e49c0aee42dcba9a12ba21338e8136 upstream.
Users of GNU ld (BFD) from binutils 2.39+ will observe multiple
instances of a new warning when linking kernels in the form:
ld: warning: arch/x86/boot/pmjump.o: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld: warning: arch/x86/boot/compressed/vmlinux has a LOAD segment with RWX permissions
Generally, we would like to avoid the stack being executable. Because
there could be a need for the stack to be executable, assembler sources
have to opt-in to this security feature via explicit creation of the
.note.GNU-stack feature (which compilers create by default) or command
line flag --noexecstack. Or we can simply tell the linker the
production of such sections is irrelevant and to link the stack as
--noexecstack.
LLVM's LLD linker defaults to -z noexecstack, so this flag isn't
strictly necessary when linking with LLD, only BFD, but it doesn't hurt
to be explicit here for all linkers IMO. --no-warn-rwx-segments is
currently BFD specific and only available in the current latest release,
so it's wrapped in an ld-option check.
While the kernel makes extensive usage of ELF sections, it doesn't use
permissions from ELF segments.
Link: https://lore.kernel.org/linux-block/3af4127a-f453-4cf7-f133-a181cce06f73@kernel.dk/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Link: https://github.com/llvm/llvm-project/issues/57009
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d362be5b14200b77ecc2127936a5ff82fbffe41 upstream.
Users of GNU ld (BFD) from binutils 2.39+ will observe multiple
instances of a new warning when linking kernels in the form:
ld: warning: vmlinux: missing .note.GNU-stack section implies executable stack
ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
ld: warning: vmlinux has a LOAD segment with RWX permissions
Generally, we would like to avoid the stack being executable. Because
there could be a need for the stack to be executable, assembler sources
have to opt-in to this security feature via explicit creation of the
.note.GNU-stack feature (which compilers create by default) or command
line flag --noexecstack. Or we can simply tell the linker the
production of such sections is irrelevant and to link the stack as
--noexecstack.
LLVM's LLD linker defaults to -z noexecstack, so this flag isn't
strictly necessary when linking with LLD, only BFD, but it doesn't hurt
to be explicit here for all linkers IMO. --no-warn-rwx-segments is
currently BFD specific and only available in the current latest release,
so it's wrapped in an ld-option check.
While the kernel makes extensive usage of ELF sections, it doesn't use
permissions from ELF segments.
Link: https://lore.kernel.org/linux-block/3af4127a-f453-4cf7-f133-a181cce06f73@kernel.dk/
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Link: https://github.com/llvm/llvm-project/issues/57009
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba6e31af2be96c4d0536f2152ed6f7b6c11bca47 upstream.
RSB fill sequence does not have any protection for miss-prediction of
conditional branch at the end of the sequence. CPU can speculatively
execute code immediately after the sequence, while RSB filling hasn't
completed yet.
#define __FILL_RETURN_BUFFER(reg, nr, sp) \
mov $(nr/2), reg; \
771: \
call 772f; \
773: /* speculation trap */ \
pause; \
lfence; \
jmp 773b; \
772: \
call 774f; \
775: /* speculation trap */ \
pause; \
lfence; \
jmp 775b; \
774: \
dec reg; \
jnz 771b; <----- CPU can miss-predict here. \
add $(BITS_PER_LONG/8) * nr, sp;
Before RSB is filled, RETs that come in program order after this macro
can be executed speculatively, making them vulnerable to RSB-based
attacks.
Mitigate it by adding an LFENCE after the conditional branch to prevent
speculation while RSB is being filled.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b1299322016731d56807aa49254a5ea3080b6b3 upstream.
tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as
documented for RET instructions after VM exits. Mitigate it with a new
one-entry RSB stuffing mechanism and a new LFENCE.
== Background ==
Indirect Branch Restricted Speculation (IBRS) was designed to help
mitigate Branch Target Injection and Speculative Store Bypass, i.e.
Spectre, attacks. IBRS prevents software run in less privileged modes
from affecting branch prediction in more privileged modes. IBRS requires
the MSR to be written on every privilege level change.
To overcome some of the performance issues of IBRS, Enhanced IBRS was
introduced. eIBRS is an "always on" IBRS, in other words, just turn
it on once instead of writing the MSR on every privilege level change.
When eIBRS is enabled, more privileged modes should be protected from
less privileged modes, including protecting VMMs from guests.
== Problem ==
Here's a simplification of how guests are run on Linux' KVM:
void run_kvm_guest(void)
{
// Prepare to run guest
VMRESUME();
// Clean up after guest runs
}
The execution flow for that would look something like this to the
processor:
1. Host-side: call run_kvm_guest()
2. Host-side: VMRESUME
3. Guest runs, does "CALL guest_function"
4. VM exit, host runs again
5. Host might make some "cleanup" function calls
6. Host-side: RET from run_kvm_guest()
Now, when back on the host, there are a couple of possible scenarios of
post-guest activity the host needs to do before executing host code:
* on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not
touched and Linux has to do a 32-entry stuffing.
* on eIBRS hardware, VM exit with IBRS enabled, or restoring the host
IBRS=1 shortly after VM exit, has a documented side effect of flushing
the RSB except in this PBRSB situation where the software needs to stuff
the last RSB entry "by hand".
IOW, with eIBRS supported, host RET instructions should no longer be
influenced by guest behavior after the host retires a single CALL
instruction.
However, if the RET instructions are "unbalanced" with CALLs after a VM
exit as is the RET in #6, it might speculatively use the address for the
instruction after the CALL in #3 as an RSB prediction. This is a problem
since the (untrusted) guest controls this address.
Balanced CALL/RET instruction pairs such as in step #5 are not affected.
== Solution ==
The PBRSB issue affects a wide variety of Intel processors which
support eIBRS. But not all of them need mitigation. Today,
X86_FEATURE_RETPOLINE triggers an RSB filling sequence that mitigates
PBRSB. Systems setting RETPOLINE need no further mitigation - i.e.,
eIBRS systems which enable retpoline explicitly.
However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RETPOLINE
and most of them need a new mitigation.
Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE
which triggers a lighter-weight PBRSB mitigation versus RSB Filling at
vmexit.
The lighter-weight mitigation performs a CALL instruction which is
immediately followed by a speculative execution barrier (INT3). This
steers speculative execution to the barrier -- just like a retpoline
-- which ensures that speculation can never reach an unbalanced RET.
Then, ensure this CALL is retired before continuing execution with an
LFENCE.
In other words, the window of exposure is opened at VM exit where RET
behavior is troublesome. While the window is open, force RSB predictions
sampling for RET targets to a dead end at the INT3. Close the window
with the LFENCE.
There is a subset of eIBRS systems which are not vulnerable to PBRSB.
Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB.
Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO.
[ bp: Massage, incorporate review comments from Andy Cooper. ]
[ Pawan: Update commit message to replace RSB_VMEXIT with RETPOLINE ]
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd97e4ad6d3b0c9fce3bca8ea8e6969d9ce7423b upstream.
In do_adb_query() function of drivers/macintosh/adb.c, req->data is copied
form userland. The parameter "req->data[2]" is missing check, the array
size of adb_handler[] is 16, so adb_handler[req->data[2]].original_address and
adb_handler[req->data[2]].handler_id will lead to oob read.
Cc: stable <stable@kernel.org>
Signed-off-by: Ning Qiang <sohu0106@126.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713153734.2248-1-sohu0106@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0341e67b3782603737f7788e71bd3530012a4f4 upstream.
Taking a recent change in the i8042 quirklist to this one: Clevo
board_names are somewhat unique, and if not: The generic Board_-/Sys_Vendor
string "Notebook" doesn't help much anyway. So identifying the devices just
by the board_name helps keeping the list significantly shorter and might
even hit more devices requiring the fix.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: c844d22fe0c0 ("ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c752089f7cf5b5800c6ace4cdd1a8351ee78a598 upstream.
The TongFang PF5PU1G, PF4NU1F, PF5NU1G, and PF5LUXG/TUXEDO BA15 Gen10,
Pulse 14/15 Gen1, and Pulse 15 Gen2 have the same problem as the Clevo
NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2:
They have a working native and video interface. However the default
detection mechanism first registers the video interface before
unregistering it again and switching to the native interface during boot.
This results in a dangling SBIOS request for backlight change for some
reason, causing the backlight to switch to ~2% once per boot on the first
power cord connect or disconnect event. Setting the native interface
explicitly circumvents this buggy behaviour by avoiding the unregistering
process.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 673235f915318ced5d7ec4b2bfd8cb909e6a4a55 upstream.
When queuing I/O request to LLD, STS_RESOURCE may be returned because:
- Host is in recovery or blocked
- Target queue throttling or target is blocked
- LLD rejection
In these scenarios BLK_STS_DEV_RESOURCE is returned to the block layer to
avoid an unnecessary re-run of the queue. However, all of the requests
queued to this SCSI device may complete immediately after reading
'sdev->device_busy' and BLK_STS_DEV_RESOURCE is returned to block layer. In
that case the current I/O won't get a chance to get queued since it is
invisible at that time for both scsi_run_queue_async() and blk-mq's
RESTART.
Fix the issue by not returning BLK_STS_DEV_RESOURCE in this situation.
Link: https://lore.kernel.org/r/20201202100419.525144-1-ming.lei@redhat.com
Fixes: 86ff7c2a80cd ("blk-mq: introduce BLK_STS_DEV_RESOURCE")
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Long Li <longli@microsoft.com>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: "chenxiang (M)" <chenxiang66@hisilicon.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 829eea7c94e0bac804e65975639a2f2e5f147033 upstream.
USB device ID of some versions of XiaoDu WiFi Dongle is 2955:1003
instead of 2955:1001. Both are the same mt7601u hardware.
Signed-off-by: Wei Mingzhi <whistler@member.fsf.org>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210618160840.305024-1-whistler@member.fsf.org
Cc: Yan Xinyu <sdlyyxy@bupt.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gcc build warning prevents all clang-built kernels from working
properly, so comment it out to fix the build.
This is a -stable kernel only patch for now, it will be resolved
differently in mainline releases in the future.
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: "Justin M. Forbes" <jforbes@fedoraproject.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2d86612aacb7805f72873691a2644d7279ed0630 ]
When using 'perf mem' and 'perf c2c', an issue is observed that tool
reports the wrong offset for global data symbols. This is a common
issue on both x86 and Arm64 platforms.
Let's see an example, for a test program, below is the disassembly for
its .bss section which is dumped with objdump:
...
Disassembly of section .bss:
0000000000004040 <completed.0>:
...
0000000000004080 <buf1>:
...
00000000000040c0 <buf2>:
...
0000000000004100 <thread>:
...
First we used 'perf mem record' to run the test program and then used
'perf --debug verbose=4 mem report' to observe what's the symbol info
for 'buf1' and 'buf2' structures.
# ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf2 0x30a8-0x30e8
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf1 0x3068-0x30a8
...
The perf tool relies on libelf to parse symbols, in executable and
shared object files, 'st_value' holds a virtual address; 'sh_addr' is
the address at which section's first byte should reside in memory, and
'sh_offset' is the byte offset from the beginning of the file to the
first byte in the section. The perf tool uses below formula to convert
a symbol's memory address to a file address:
file_address = st_value - sh_addr + sh_offset
^
` Memory address
We can see the final adjusted address ranges for buf1 and buf2 are
[0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is
incorrect, in the code, the structure for 'buf1' and 'buf2' specifies
compiler attribute with 64-byte alignment.
The problem happens for 'sh_offset', libelf returns it as 0x3028 which
is not 64-byte aligned, combining with disassembly, it's likely libelf
doesn't respect the alignment for .bss section, therefore, it doesn't
return the aligned value for 'sh_offset'.
Suggested by Fangrui Song, ELF file contains program header which
contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD
segments contain the execution info. A better choice for converting
memory address to file address is using the formula:
file_address = st_value - p_vaddr + p_offset
This patch introduces elf_read_program_header() which returns the
program header based on the passed 'st_value', then it uses the formula
above to calculate the symbol file address; and the debugging log is
updated respectively.
After applying the change:
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf2 0x30c0-0x3100
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf1 0x3080-0x30c0
...
Fixes: f17e04afaff84b5c ("perf report: Fix ELF symbol parsing")
Reported-by: Chang Rui <changruinj@gmail.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99a63d36cb3ed5ca3aa6fcb64cffbeaf3b0fb164 ]
Domingo Dirutigliano and Nicola Guerrera report kernel panic when
sending nf_queue verdict with 1-byte nfta_payload attribute.
The IP/IPv6 stack pulls the IP(v6) header from the packet after the
input hook.
If user truncates the packet below the header size, this skb_pull() will
result in a malformed skb (skb->len < 0).
Fixes: 7af4cc3fa158 ("[NETFILTER]: Add "nfnetlink_queue" netfilter queue handler over nfnetlink")
Reported-by: Domingo Dirutigliano <pwnzer0tt1@proton.me>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b89fc26f741d9f9efb51cba3e9b241cf1380ec5a ]
There are sleep in atomic context bugs in timer handlers of sctp
such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(),
sctp_generate_t1_init_event(), sctp_generate_timeout_event(),
sctp_generate_t3_rtx_event() and so on.
The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter
that may sleep could be called by different timer handlers which is in
interrupt context.
One of the call paths that could trigger bug is shown below:
(interrupt context)
sctp_generate_probe_event
sctp_do_sm
sctp_side_effects
sctp_cmd_interpreter
sctp_outq_teardown
sctp_outq_init
sctp_sched_set_sched
n->init_sid(..,GFP_KERNEL)
sctp_sched_prio_init_sid //may sleep
This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched()
from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic
context bugs.
Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20220723015809.11553-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fcbb711024aac6d4db385623e6f2fdf019f7782 ]
Fix the inability to bring an interface up on a setup with
only MSI interrupts enabled (no MSI-X).
Solution is to add a default number of QPs = 1. This is enough,
since without MSI-X support driver enables only a basic feature set.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79f55473bfc8ac51bd6572929a679eeb4da22251 ]
While reading sysctl_tcp_comp_sack_nr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 9c21d2fc41c0 ("tcp: add tcp_comp_sack_nr sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4866b2b0f7672b6d760c4b8ece6fb56f965dcc8a ]
While reading sysctl_tcp_comp_sack_delay_ns, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 6d82aa242092 ("tcp: add tcp_comp_sack_delay_ns sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa709da0e032cee7c202047ecd75f437bb0126ed ]
Since commit 1033990ac5b2 ("sctp: implement memory accounting on tx path"),
SCTP has supported memory accounting on tx path where 'sctp_wmem' is used
by sk_wmem_schedule(). So we should fix the description for this option in
ip-sysctl.rst accordingly.
v1->v2:
- Improve the description as Marcelo suggested.
Fixes: 1033990ac5b2 ("sctp: implement memory accounting on tx path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2afdbe7b8de84c28e219073a6661080e1b3ded48 ]
While reading sysctl_tcp_invalid_ratelimit, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 032ee4236954 ("tcp: helpers to mitigate ACK loops by rate-limiting out-of-window dupacks")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85225e6f0a76e6745bc841c9f25169c509b573d8 ]
While reading sysctl_tcp_autocorking, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: f54b311142a9 ("tcp: auto corking")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1330ffacd05fc9ac4159d19286ce119e22450ed2 ]
While reading sysctl_tcp_min_rtt_wlen, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: f672258391b4 ("tcp: track min RTT using windowed min-filter")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0bb4ab9dfddd872622239f49fb2bd403b70853b ]
While reading sysctl_tcp_min_tso_segs, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebbbe23fdf6070e31509638df3321688358cc211 ]
In bcm5421_init(), we should call of_node_put() for the reference
returned by of_get_parent() which has increased the refcount.
Fixes: 3c326fe9cb7a ("[PATCH] ppc64: Add new PHY to sungem")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220720131003.1287426-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ebcc62c738f68688ee7c6fec2efe5bc6d3d7e60 ]
While reading sysctl_igmp_qrv, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
This test can be packed into a helper, so such changes will be in the
follow-up series after net is merged into net-next.
qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
Fixes: a9fe8e29945d ("ipv4: implement igmp_qrv sysctl to tune igmp robustness variable")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e27326009a3d247b831eda38878c777f6f4eb3d1 upstream.
When we close ping6 sockets, some resources are left unfreed because
pingv6_prot is missing sk->sk_prot->destroy(). As reported by
syzbot [0], just three syscalls leak 96 bytes and easily cause OOM.
struct ipv6_sr_hdr *hdr;
char data[24] = {0};
int fd;
hdr = (struct ipv6_sr_hdr *)data;
hdr->hdrlen = 2;
hdr->type = IPV6_SRCRT_TYPE_4;
fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP);
setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24);
close(fd);
To fix memory leaks, let's add a destroy function.
Note the socket() syscall checks if the GID is within the range of
net.ipv4.ping_group_range. The default value is [1, 0] so that no
GID meets the condition (1 <= GID <= 0). Thus, the local DoS does
not succeed until we change the default value. However, at least
Ubuntu/Fedora/RHEL loosen it.
$ cat /usr/lib/sysctl.d/50-default.conf
...
-net.ipv4.ping_group_range = 0 2147483647
Also, there could be another path reported with these options, and
some of them require CAP_NET_RAW.
setsockopt
IPV6_ADDRFORM (inet6_sk(sk)->pktoptions)
IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu)
IPV6_HOPOPTS (inet6_sk(sk)->opt)
IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt)
IPV6_RTHDR (inet6_sk(sk)->opt)
IPV6_DSTOPTS (inet6_sk(sk)->opt)
IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt)
getsockopt
IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list)
For the record, I left a different splat with syzbot's one.
unreferenced object 0xffff888006270c60 (size 96):
comm "repro2", pid 231, jiffies 4294696626 (age 13.118s)
hex dump (first 32 bytes):
01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 ....D...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554)
[<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715)
[<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024)
[<000000007096a025>] __sys_setsockopt (net/socket.c:2254)
[<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262)
[<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176
Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.")
Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db3815a2fa691da145cfbe834584f31ad75df9ff upstream.
While reading sysctl_tcp_challenge_ack_limit, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 282f23c6ee34 ("tcp: implement RFC 5961 3.2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3435afba87dc6cd83f5595e7607f3c40f93ef01 upstream.
In ufshcd_populate_vreg(), we should hold the reference returned by
of_parse_phandle() and then use it to call of_node_put() for refcount
balance.
Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8499a2454d9e8a55ce616ede9f9580f36fd5b0f3 upstream.
While reading sysctl_tcp_nometrics_save, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
