IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 63d5429f68a3d4c4aa27e65a05196c17f86c41d6 ]
Using strncpy() on NUL-terminated strings are deprecated. To avoid
possible forming of non-terminated string strscpy() should be used.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22a3c0ac8ed0043af209a15928ae4c4855b0a4c4 ]
At find_extent_clone(), unless we are given an inline extent, a file
extent item that represents hole or an extent that starts beyond the
i_size, we always do backref walking to look for clone sources, unless
if we have more than SEND_MAX_EXTENT_REFS (64) known references on the
extent.
However if we know we only have one reference in the extent item and only
one clone source (the send root), then it's pointless to do the backref
walking to search for clone sources, as we can't clone from any other
root. So skip the backref walking in that case.
The following test was run on a non-debug kernel (Debian's default kernel
config):
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create an extent tree that's not too small and none of the
# extents is shared.
for ((i = 1; i <= 50000; i++)); do
xfs_io -f -c "pwrite 0 4K" $MNT/file_$i > /dev/null
echo -ne "\r$i files created..."
done
echo
btrfs subvolume snapshot -r $MNT $MNT/snap
start=$(date +%s%N)
btrfs send $MNT/snap > /dev/null
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo -e "\nsend took $dur milliseconds"
umount $MNT
Before this change:
send took 5389 milliseconds
After this change:
send took 4519 milliseconds (-16.1%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 63d5429f68a3 ("btrfs: replace strncpy() with strscpy()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 418ffb9e3cf6c4e2574d3a732b724916684bd133 ]
btrfs_ioctl_logical_to_ino() frees the search path after the userspace
copy from the temp buffer @inodes. Which potentially can lead to a lock
splat.
Fix this by freeing the path before we copy @inodes to userspace.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 013c1c5585ebcfb19c88efe79063d0463b1b6159 upstream.
btrfs_ioctl_get_subvol_info() frees the search path after the userspace
copy from the temp buffer @subvol_info. This can lead to a lock splat
warning.
Fix this by freeing the path before we copy it to userspace.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cf96b409d9b3946ece58ced13f92d0f775b0442 upstream.
btrfs_ioctl_ino_to_path() frees the search path after the userspace copy
from the temp buffer @ipath->fspath. Which potentially can lead to a lock
splat warning.
Fix this by freeing the path before we copy it to userspace.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d0ea17aec12ea0f7b9d2ed727d8ef8169d1e7699 ]
Several places in the qgroup self tests follow the pattern of freeing the
ulist pointer they passed to btrfs_find_all_roots() if the call to that
function returned an error. That is pointless because that function always
frees the ulist in case it returns an error.
Also In some places like at test_multiple_refs(), after a call to
btrfs_qgroup_account_extent() we also leave "old_roots" and "new_roots"
pointing to ulists that were freed, because btrfs_qgroup_account_extent()
has freed those ulists, and if after that the next call to
btrfs_find_all_roots() fails, we call ulist_free() on the "old_roots"
ulist again, resulting in a double free.
So remove those calls to reduce the code size and avoid double ulist
free in case of an error.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2398091f9c2c8e0040f4f9928666787a3e8108a7 upstream.
The type of parameter generation has been u32 since the beginning,
however all callers pass a u64 generation, so unify the types to prevent
potential loss.
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d37de92b38932d40e4a251e876cc388f9aee5f42 ]
In the test_no_shared_qgroup() and test_multiple_refs() qgroup self tests,
if we fail to add the tree ref, remove the extent item or remove the
extent ref, we are returning from the test function without freeing the
"old_roots" ulist that was allocated by the previous calls to
btrfs_find_all_roots(). Fix that by calling ulist_free() before returning.
Fixes: 442244c96332 ("btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5614dc3a47e3310fbc77ea3b67eaadd1c6417bf1 ]
During backref walking, at resolve_indirect_refs(), if we get an error
we jump to the 'out' label and call ulist_free() on the 'parents' ulist,
which frees all the elements in the ulist - however that does not free
any inode lists that may be attached to elements, through the 'aux' field
of a ulist node, so we end up leaking lists if we have any attached to
the unodes.
Fix this by calling free_leaf_list() instead of ulist_free() when we exit
from resolve_indirect_refs(). The static function free_leaf_list() is
moved up for this to be possible and it's slightly simplified by removing
unnecessary code.
Fixes: 3301958b7c1d ("Btrfs: add inodes before dropping the extent lock in find_all_leafs")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 943553ef9b51db303ab2b955c1025261abfdf6fb ]
During backref walking, when processing a delayed reference with a type of
BTRFS_TREE_BLOCK_REF_KEY, we have two bugs there:
1) We are accessing the delayed references extent_op, and its key, without
the protection of the delayed ref head's lock;
2) If there's no extent op for the delayed ref head, we end up with an
uninitialized key in the stack, variable 'tmp_op_key', and then pass
it to add_indirect_ref(), which adds the reference to the indirect
refs rb tree.
This is wrong, because indirect references should have a NULL key
when we don't have access to the key, and in that case they should be
added to the indirect_missing_keys rb tree and not to the indirect rb
tree.
This means that if have BTRFS_TREE_BLOCK_REF_KEY delayed ref resulting
from freeing an extent buffer, therefore with a count of -1, it will
not cancel out the corresponding reference we have in the extent tree
(with a count of 1), since both references end up in different rb
trees.
When using fiemap, where we often need to check if extents are shared
through shared subtrees resulting from snapshots, it means we can
incorrectly report an extent as shared when it's no longer shared.
However this is temporary because after the transaction is committed
the extent is no longer reported as shared, as running the delayed
reference results in deleting the tree block reference from the extent
tree.
Outside the fiemap context, the result is unpredictable, as the key was
not initialized but it's used when navigating the rb trees to insert
and search for references (prelim_ref_compare()), and we expect all
references in the indirect rb tree to have valid keys.
The following reproducer triggers the second bug:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount -o compress $DEV $MNT
# With a compressed 128M file we get a tree height of 2 (level 1 root).
xfs_io -f -c "pwrite -b 1M 0 128M" $MNT/foo
btrfs subvolume snapshot $MNT $MNT/snap
# Fiemap should output 0x2008 in the flags column.
# 0x2000 means shared extent
# 0x8 means encoded extent (because it's compressed)
echo
echo "fiemap after snapshot, range [120M, 120M + 128K):"
xfs_io -c "fiemap -v 120M 128K" $MNT/foo
echo
# Overwrite one extent and fsync to flush delalloc and COW a new path
# in the snapshot's tree.
#
# After this we have a BTRFS_DROP_DELAYED_REF delayed ref of type
# BTRFS_TREE_BLOCK_REF_KEY with a count of -1 for every COWed extent
# buffer in the path.
#
# In the extent tree we have inline references of type
# BTRFS_TREE_BLOCK_REF_KEY, with a count of 1, for the same extent
# buffers, so they should cancel each other, and the extent buffers in
# the fs tree should no longer be considered as shared.
#
echo "Overwriting file range [120M, 120M + 128K)..."
xfs_io -c "pwrite -b 128K 120M 128K" $MNT/snap/foo
xfs_io -c "fsync" $MNT/snap/foo
# Fiemap should output 0x8 in the flags column. The extent in the range
# [120M, 120M + 128K) is no longer shared, it's now exclusive to the fs
# tree.
echo
echo "fiemap after overwrite range [120M, 120M + 128K):"
xfs_io -c "fiemap -v 120M 128K" $MNT/foo
echo
umount $MNT
Running it before this patch:
$ ./test.sh
(...)
wrote 134217728/134217728 bytes at offset 0
128 MiB, 128 ops; 0.1152 sec (1.085 GiB/sec and 1110.5809 ops/sec)
Create a snapshot of '/mnt/sdj' in '/mnt/sdj/snap'
fiemap after snapshot, range [120M, 120M + 128K):
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [245760..246015]: 34304..34559 256 0x2008
Overwriting file range [120M, 120M + 128K)...
wrote 131072/131072 bytes at offset 125829120
128 KiB, 1 ops; 0.0001 sec (683.060 MiB/sec and 5464.4809 ops/sec)
fiemap after overwrite range [120M, 120M + 128K):
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [245760..246015]: 34304..34559 256 0x2008
The extent in the range [120M, 120M + 128K) is still reported as shared
(0x2000 bit set) after overwriting that range and flushing delalloc, which
is not correct - an entire path was COWed in the snapshot's tree and the
extent is now only referenced by the original fs tree.
Running it after this patch:
$ ./test.sh
(...)
wrote 134217728/134217728 bytes at offset 0
128 MiB, 128 ops; 0.1198 sec (1.043 GiB/sec and 1068.2067 ops/sec)
Create a snapshot of '/mnt/sdj' in '/mnt/sdj/snap'
fiemap after snapshot, range [120M, 120M + 128K):
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [245760..246015]: 34304..34559 256 0x2008
Overwriting file range [120M, 120M + 128K)...
wrote 131072/131072 bytes at offset 125829120
128 KiB, 1 ops; 0.0001 sec (694.444 MiB/sec and 5555.5556 ops/sec)
fiemap after overwrite range [120M, 120M + 128K):
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [245760..246015]: 34304..34559 256 0x8
Now the extent is not reported as shared anymore.
So fix this by passing a NULL key pointer to add_indirect_ref() when
processing a delayed reference for a tree block if there's no extent op
for our delayed ref head with a defined key. Also access the extent op
only after locking the delayed ref head's lock.
The reproducer will be converted later to a test case for fstests.
Fixes: 86d5f994425252 ("btrfs: convert prelimary reference tracking to use rbtrees")
Fixes: a6dbceafb915e8 ("btrfs: Remove unused op_key var from add_delayed_refs")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fc7b57228243d09c0d878873bf24fa64a90fa01 ]
When processing delayed data references during backref walking and we are
using a share context (we are being called through fiemap), whenever we
find a delayed data reference for an inode different from the one we are
interested in, then we immediately exit and consider the data extent as
shared. This is wrong, because:
1) This might be a DROP reference that will cancel out a reference in the
extent tree;
2) Even if it's an ADD reference, it may be followed by a DROP reference
that cancels it out.
In either case we should not exit immediately.
Fix this by never exiting when we find a delayed data reference for
another inode - instead add the reference and if it does not cancel out
other delayed reference, we will exit early when we call
extent_is_shared() after processing all delayed references. If we find
a drop reference, then signal the code that processes references from
the extent tree (add_inline_refs() and add_keyed_refs()) to not exit
immediately if it finds there a reference for another inode, since we
have delayed drop references that may cancel it out. In this later case
we exit once we don't have references in the rb trees that cancel out
each other and have two references for different inodes.
Example reproducer for case 1):
$ cat test-1.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
xfs_io -f -c "pwrite 0 64K" $MNT/foo
cp --reflink=always $MNT/foo $MNT/bar
echo
echo "fiemap after cloning:"
xfs_io -c "fiemap -v" $MNT/foo
rm -f $MNT/bar
echo
echo "fiemap after removing file bar:"
xfs_io -c "fiemap -v" $MNT/foo
umount $MNT
Running it before this patch, the extent is still listed as shared, it has
the flag 0x2000 (FIEMAP_EXTENT_SHARED) set:
$ ./test-1.sh
fiemap after cloning:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
Example reproducer for case 2):
$ cat test-2.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
xfs_io -f -c "pwrite 0 64K" $MNT/foo
cp --reflink=always $MNT/foo $MNT/bar
# Flush delayed references to the extent tree and commit current
# transaction.
sync
echo
echo "fiemap after cloning:"
xfs_io -c "fiemap -v" $MNT/foo
rm -f $MNT/bar
echo
echo "fiemap after removing file bar:"
xfs_io -c "fiemap -v" $MNT/foo
umount $MNT
Running it before this patch, the extent is still listed as shared, it has
the flag 0x2000 (FIEMAP_EXTENT_SHARED) set:
$ ./test-2.sh
fiemap after cloning:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
After this patch, after deleting bar in both tests, the extent is not
reported with the 0x2000 flag anymore, it gets only the flag 0x1
(which is FIEMAP_EXTENT_LAST):
$ ./test-1.sh
fiemap after cloning:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x1
$ ./test-2.sh
fiemap after cloning:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x2001
fiemap after removing file bar:
/mnt/sdj/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 26624..26751 128 0x1
These tests will later be converted to a test case for fstests.
Fixes: dc046b10c8b7d4 ("Btrfs: make fiemap not blow when you have lots of snapshots")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 331cd9461412e103d07595a10289de90004ac890 upstream.
When enabling quotas, at btrfs_quota_enable(), after committing the
transaction, we change fs_info->quota_root to point to the quota root we
created and set BTRFS_FS_QUOTA_ENABLED at fs_info->flags. Then we try
to start the qgroup rescan worker, first by initializing it with a call
to qgroup_rescan_init() - however if that fails we end up freeing the
quota root but we leave fs_info->quota_root still pointing to it, this
can later result in a use-after-free somewhere else.
We have previously set the flags BTRFS_FS_QUOTA_ENABLED and
BTRFS_QGROUP_STATUS_FLAG_ON, so we can only fail with -EINPROGRESS at
btrfs_quota_enable(), which is possible if someone already called the
quota rescan ioctl, and therefore started the rescan worker.
So fix this by ignoring an -EINPROGRESS and asserting we can't get any
other error.
Reported-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/linux-btrfs/20220823015931.421355-1-yebin10@huawei.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b51111271b0352aa596c5ae8faf06939e91b3b68 upstream.
For a filesystem which has btrfs read-only property set to true, all
write operations including xattr should be denied. However, security
xattr can still be changed even if btrfs ro property is true.
This happens because xattr_permission() does not have any restrictions
on security.*, system.* and in some cases trusted.* from VFS and
the decision is left to the underlying filesystem. See comments in
xattr_permission() for more details.
This patch checks if the root is read-only before performing the set
xattr operation.
Testcase:
DEV=/dev/vdb
MNT=/mnt
mkfs.btrfs -f $DEV
mount $DEV $MNT
echo "file one" > $MNT/f1
setfattr -n "security.one" -v 2 $MNT/f1
btrfs property set /mnt ro true
setfattr -n "security.one" -v 1 $MNT/f1
umount $MNT
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6065f8edeb25f4a9dfe0b446030ad995a84a088 upstream.
[BUG]
There is a small workload which will always fail with recent kernel:
(A simplified version from btrfs/125 test case)
mkfs.btrfs -f -m raid5 -d raid5 -b 1G $dev1 $dev2 $dev3
mount $dev1 $mnt
xfs_io -f -c "pwrite -S 0xee 0 1M" $mnt/file1
sync
umount $mnt
btrfs dev scan -u $dev3
mount -o degraded $dev1 $mnt
xfs_io -f -c "pwrite -S 0xff 0 128M" $mnt/file2
umount $mnt
btrfs dev scan
mount $dev1 $mnt
btrfs balance start --full-balance $mnt
umount $mnt
The failure is always failed to read some tree blocks:
BTRFS info (device dm-4): relocating block group 217710592 flags data|raid5
BTRFS error (device dm-4): parent transid verify failed on 38993920 wanted 9 found 7
BTRFS error (device dm-4): parent transid verify failed on 38993920 wanted 9 found 7
...
[CAUSE]
With the recently added debug output, we can see all RAID56 operations
related to full stripe 38928384:
56.1183: raid56_read_partial: full_stripe=38928384 devid=2 type=DATA1 offset=0 opf=0x0 physical=9502720 len=65536
56.1185: raid56_read_partial: full_stripe=38928384 devid=3 type=DATA2 offset=16384 opf=0x0 physical=9519104 len=16384
56.1185: raid56_read_partial: full_stripe=38928384 devid=3 type=DATA2 offset=49152 opf=0x0 physical=9551872 len=16384
56.1187: raid56_write_stripe: full_stripe=38928384 devid=3 type=DATA2 offset=0 opf=0x1 physical=9502720 len=16384
56.1188: raid56_write_stripe: full_stripe=38928384 devid=3 type=DATA2 offset=32768 opf=0x1 physical=9535488 len=16384
56.1188: raid56_write_stripe: full_stripe=38928384 devid=1 type=PQ1 offset=0 opf=0x1 physical=30474240 len=16384
56.1189: raid56_write_stripe: full_stripe=38928384 devid=1 type=PQ1 offset=32768 opf=0x1 physical=30507008 len=16384
56.1218: raid56_write_stripe: full_stripe=38928384 devid=3 type=DATA2 offset=49152 opf=0x1 physical=9551872 len=16384
56.1219: raid56_write_stripe: full_stripe=38928384 devid=1 type=PQ1 offset=49152 opf=0x1 physical=30523392 len=16384
56.2721: raid56_parity_recover: full stripe=38928384 eb=39010304 mirror=2
56.2723: raid56_parity_recover: full stripe=38928384 eb=39010304 mirror=2
56.2724: raid56_parity_recover: full stripe=38928384 eb=39010304 mirror=2
Before we enter raid56_parity_recover(), we have triggered some metadata
write for the full stripe 38928384, this leads to us to read all the
sectors from disk.
Furthermore, btrfs raid56 write will cache its calculated P/Q sectors to
avoid unnecessary read.
This means, for that full stripe, after any partial write, we will have
stale data, along with P/Q calculated using that stale data.
Thankfully due to patch "btrfs: only write the sectors in the vertical stripe
which has data stripes" we haven't submitted all the corrupted P/Q to disk.
When we really need to recover certain range, aka in
raid56_parity_recover(), we will use the cached rbio, along with its
cached sectors (the full stripe is all cached).
This explains why we have no event raid56_scrub_read_recover()
triggered.
Since we have the cached P/Q which is calculated using the stale data,
the recovered one will just be stale.
In our particular test case, it will always return the same incorrect
metadata, thus causing the same error message "parent transid verify
failed on 39010304 wanted 9 found 7" again and again.
[BTRFS DESTRUCTIVE RMW PROBLEM]
Test case btrfs/125 (and above workload) always has its trouble with
the destructive read-modify-write (RMW) cycle:
0 32K 64K
Data1: | Good | Good |
Data2: | Bad | Bad |
Parity: | Good | Good |
In above case, if we trigger any write into Data1, we will use the bad
data in Data2 to re-generate parity, killing the only chance to recovery
Data2, thus Data2 is lost forever.
This destructive RMW cycle is not specific to btrfs RAID56, but there
are some btrfs specific behaviors making the case even worse:
- Btrfs will cache sectors for unrelated vertical stripes.
In above example, if we're only writing into 0~32K range, btrfs will
still read data range (32K ~ 64K) of Data1, and (64K~128K) of Data2.
This behavior is to cache sectors for later update.
Incidentally commit d4e28d9b5f04 ("btrfs: raid56: make steal_rbio()
subpage compatible") has a bug which makes RAID56 to never trust the
cached sectors, thus slightly improve the situation for recovery.
Unfortunately, follow up fix "btrfs: update stripe_sectors::uptodate in
steal_rbio" will revert the behavior back to the old one.
- Btrfs raid56 partial write will update all P/Q sectors and cache them
This means, even if data at (64K ~ 96K) of Data2 is free space, and
only (96K ~ 128K) of Data2 is really stale data.
And we write into that (96K ~ 128K), we will update all the parity
sectors for the full stripe.
This unnecessary behavior will completely kill the chance of recovery.
Thankfully, an unrelated optimization "btrfs: only write the sectors
in the vertical stripe which has data stripes" will prevent
submitting the write bio for untouched vertical sectors.
That optimization will keep the on-disk P/Q untouched for a chance for
later recovery.
[FIX]
Although we have no good way to completely fix the destructive RMW
(unless we go full scrub for each partial write), we can still limit the
damage.
With patch "btrfs: only write the sectors in the vertical stripe which
has data stripes" now we won't really submit the P/Q of unrelated
vertical stripes, so the on-disk P/Q should still be fine.
Now we really need to do is just drop all the cached sectors when doing
recovery.
By this, we have a chance to read the original P/Q from disk, and have a
chance to recover the stale data, while still keep the cache to speed up
regular write path.
In fact, just dropping all the cache for recovery path is good enough to
allow the test case btrfs/125 along with the small script to pass
reliably.
The lack of metadata write after the degraded mount, and forced metadata
COW is saving us this time.
So this patch will fix the behavior by not trust any cache in
__raid56_parity_recover(), to solve the problem while still keep the
cache useful.
But please note that this test pass DOES NOT mean we have solved the
destructive RMW problem, we just do better damage control a little
better.
Related patches:
- btrfs: only write the sectors in the vertical stripe
- d4e28d9b5f04 ("btrfs: raid56: make steal_rbio() subpage compatible")
- btrfs: update stripe_sectors::uptodate in steal_rbio
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd8f7e627703ca5707833d623efcd43f104c7b3f upstream.
If we have only 8K partial write at the beginning of a full RAID56
stripe, we will write the following contents:
0 8K 32K 64K
Disk 1 (data): |XX| | |
Disk 2 (data): | | |
Disk 3 (parity): |XXXXXXXXXXXXXXX|XXXXXXXXXXXXXXX|
|X| means the sector will be written back to disk.
Note that, although we won't write any sectors from disk 2, but we will
write the full 64KiB of parity to disk.
This behavior is fine for now, but not for the future (especially for
RAID56J, as we waste quite some space to journal the unused parity
stripes).
So here we will also utilize the btrfs_raid_bio::dbitmap, anytime we
queue a higher level bio into an rbio, we will update rbio::dbitmap to
indicate which vertical stripes we need to writeback.
And at finish_rmw(), we also check dbitmap to see if we need to write
any sector in the vertical stripe.
So after the patch, above example will only lead to the following
writeback pattern:
0 8K 32K 64K
Disk 1 (data): |XX| | |
Disk 2 (data): | | |
Disk 3 (parity): |XX| | |
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a6b75b79902e47f46328b57733f2604774fa2d9 upstream.
During log replay, when processing inode references, if we get an error
when looking up for an extended reference at __add_inode_ref(), we ignore
it and proceed, returning success (0) if no other error happens after the
lookup. This is obviously wrong because in case an extended reference
exists and it encodes some name not in the log, we need to unlink it,
otherwise the filesystem state will not match the state it had after the
last fsync.
So just make __add_inode_ref() return an error it gets from the extended
reference lookup.
Fixes: f186373fef005c ("btrfs: extended inode refs")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc4d31684974d140250f3ee612c3f0cab13b3146 upstream.
[BUG]
If we have a btrfs image with dirty log, along with an unsupported RO
compatible flag:
log_root 30474240
...
compat_flags 0x0
compat_ro_flags 0x40000003
( FREE_SPACE_TREE |
FREE_SPACE_TREE_VALID |
unknown flag: 0x40000000 )
Then even if we can only mount it RO, we will still cause metadata
update for log replay:
BTRFS info (device dm-1): flagging fs with big metadata feature
BTRFS info (device dm-1): using free space tree
BTRFS info (device dm-1): has skinny extents
BTRFS info (device dm-1): start tree-log replay
This is definitely against RO compact flag requirement.
[CAUSE]
RO compact flag only forces us to do RO mount, but we will still do log
replay for plain RO mount.
Thus this will result us to do log replay and update metadata.
This can be very problematic for new RO compat flag, for example older
kernel can not understand v2 cache, and if we allow metadata update on
RO mount and invalidate/corrupt v2 cache.
[FIX]
Just reject the mount unless rescue=nologreplay is provided:
BTRFS error (device dm-1): cannot replay dirty log with unsupport optional features (0x40000000), try rescue=nologreplay instead
We don't want to set rescue=nologreply directly, as this would make the
end user to read the old data, and cause confusion.
Since the such case is really rare, we're mostly fine to just reject the
mount with an error message, which also includes the proper workaround.
CC: stable@vger.kernel.org #4.9+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d201238ccd2f30b9bfcfadaeae0972e3a486a176 upstream.
[BUG]
There is a report that a btrfs has a bad super block num devices.
This makes btrfs to reject the fs completely.
BTRFS error (device sdd3): super_num_devices 3 mismatch with num_devices 2 found here
BTRFS error (device sdd3): failed to read chunk tree: -22
BTRFS error (device sdd3): open_ctree failed
[CAUSE]
During btrfs device removal, chunk tree and super block num devs are
updated in two different transactions:
btrfs_rm_device()
|- btrfs_rm_dev_item(device)
| |- trans = btrfs_start_transaction()
| | Now we got transaction X
| |
| |- btrfs_del_item()
| | Now device item is removed from chunk tree
| |
| |- btrfs_commit_transaction()
| Transaction X got committed, super num devs untouched,
| but device item removed from chunk tree.
| (AKA, super num devs is already incorrect)
|
|- cur_devices->num_devices--;
|- cur_devices->total_devices--;
|- btrfs_set_super_num_devices()
All those operations are not in transaction X, thus it will
only be written back to disk in next transaction.
So after the transaction X in btrfs_rm_dev_item() committed, but before
transaction X+1 (which can be minutes away), a power loss happen, then
we got the super num mismatch.
This has been fixed by commit bbac58698a55 ("btrfs: remove device item
and update super block in the same transaction").
[FIX]
Make the super_num_devices check less strict, converting it from a hard
error to a warning, and reset the value to a correct one for the current
or next transaction commit.
As the number of device items is the critical information where the
super block num_devices is only a cached value (and also useful for
cross checking), it's safe to automatically update it. Other device
related problems like missing device are handled after that and may
require other means to resolve, like degraded mount. With this fix,
potentially affected filesystems won't fail mount and require the manual
repair by btrfs check.
Reported-by: Luca Béla Palkovics <luca.bela.palkovics@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+8xDSpvdm_U0QLBAnrH=zqDq_cWCOH5TiV46CKmp3igr44okQ@mail.gmail.com/
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5321a0fa8bc49f11bea0b470800962c17d92d8f upstream.
The following error message lack the "0x" obviously:
cannot mount because of unsupported optional features (4000)
Add the prefix to make it less confusing. This can happen on older
kernels that try to mount a filesystem with newer features so it makes
sense to backport to older trees.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0e64a981fd841cb0f28fcd6afcac55e6f1e6994 upstream.
On Linux, empty symlinks are invalid, and attempting to create one with
the system call symlink(2) results in an -ENOENT error and this is
explicitly documented in the man page.
If we rename a symlink that was created in the current transaction and its
parent directory was logged before, we actually end up logging the symlink
without logging its content, which is stored in an inline extent. That
means that after a power failure we can end up with an empty symlink,
having no content and an i_size of 0 bytes.
It can be easily reproduced like this:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/testdir
$ sync
# Create a file inside the directory and fsync the directory.
$ touch /mnt/testdir/foo
$ xfs_io -c "fsync" /mnt/testdir
# Create a symlink inside the directory and then rename the symlink.
$ ln -s /mnt/testdir/foo /mnt/testdir/bar
$ mv /mnt/testdir/bar /mnt/testdir/baz
# Now fsync again the directory, this persist the log tree.
$ xfs_io -c "fsync" /mnt/testdir
<power failure>
$ mount /dev/sdc /mnt
$ stat -c %s /mnt/testdir/baz
0
$ readlink /mnt/testdir/baz
$
Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that
their content is also logged.
A test case for fstests will follow.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b642b52d0b50f4d398cb4293f64992d0eed2e2ce upstream.
We use extent_changeset->bytes_changed in qgroup_reserve_data() to record
how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the
bytes_changed is set as "unsigned int", and it will overflow if we try to
fallocate a range larger than 4GiB. The result is we reserve less bytes
and eventually break the qgroup limit.
Unlike regular buffered/direct write, which we use one changeset for
each ordered extent, which can never be larger than 256M. For
fallocate, we use one changeset for the whole range, thus it no longer
respects the 256M per extent limit, and caused the problem.
The following example test script reproduces the problem:
$ cat qgroup-overflow.sh
#!/bin/bash
DEV=/dev/sdj
MNT=/mnt/sdj
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Set qgroup limit to 2GiB.
btrfs quota enable $MNT
btrfs qgroup limit 2G $MNT
# Try to fallocate a 3GiB file. This should fail.
echo
echo "Try to fallocate a 3GiB file..."
fallocate -l 3G $MNT/3G.file
# Try to fallocate a 5GiB file.
echo
echo "Try to fallocate a 5GiB file..."
fallocate -l 5G $MNT/5G.file
# See we break the qgroup limit.
echo
sync
btrfs qgroup show -r $MNT
umount $MNT
When running the test:
$ ./qgroup-overflow.sh
(...)
Try to fallocate a 3GiB file...
fallocate: fallocate failed: Disk quota exceeded
Try to fallocate a 5GiB file...
qgroupid rfer excl max_rfer
-------- ---- ---- --------
0/5 5.00GiB 5.00GiB 2.00GiB
Since we have no control of how bytes_changed is used, it's better to
set it to u64.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4751dc99627e4d1465c5bfa8cb7ab31ed418eff5 upstream.
During log replay, whenever we need to check if a name (dentry) exists in
a directory we do searches on the subvolume tree for inode references or
or directory entries (BTRFS_DIR_INDEX_KEY keys, and BTRFS_DIR_ITEM_KEY
keys as well, before kernel 5.17). However when during log replay we
unlink a name, through btrfs_unlink_inode(), we may not delete inode
references and dir index keys from a subvolume tree and instead just add
the deletions to the delayed inode's delayed items, which will only be
run when we commit the transaction used for log replay. This means that
after an unlink operation during log replay, if we attempt to search for
the same name during log replay, we will not see that the name was already
deleted, since the deletion is recorded only on the delayed items.
We run delayed items after every unlink operation during log replay,
except at unlink_old_inode_refs() and at add_inode_ref(). This was due
to an overlook, as delayed items should be run after evert unlink, for
the reasons stated above.
So fix those two cases.
Fixes: 0d836392cadd5 ("Btrfs: fix mount failure after fsync due to hard link recreation")
Fixes: 1f250e929a9c9 ("Btrfs: fix log replay failure after unlink and link combination")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e7be9db125a0bf940c5d65eb5c40d8700f738b5 upstream.
Currently if we get IO error while doing send then we abort without
logging information about which file caused issue. So log it to help
with debugging.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Dāvis Mosāns <davispuh@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9f05c09d6baef789726346397438cca4ec43c3ee ]
If we're looking for leafs that point to a data extent we want to record
the extent items that point at our bytenr. At this point we have the
reference and we know for a fact that this leaf should have a reference
to our bytenr. However if there's some sort of corruption we may not
find any references to our leaf, and thus could end up with eie == NULL.
Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the
mortals.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcba0120edf88328524a4878d1d6f4ad39f2ec81 ]
We search for an extent entry with .offset = -1, which shouldn't be a
thing, but corruption happens. Add an ASSERT() for the developers,
return -EUCLEAN for mortals.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a91cf0ffbc244792e0b3ecf7d0fddb2f344b461f ]
When a disk has write caching disabled, we skip submission of a bio with
flush and sync requests before writing the superblock, since it's not
needed. However when the integrity checker is enabled, this results in
reports that there are metadata blocks referred by a superblock that
were not properly flushed. So don't skip the bio submission only when
the integrity checker is enabled for the sake of simplicity, since this
is a debug tool and not meant for use in non-debug builds.
fstests/btrfs/220 trigger a check-integrity warning like the following
when CONFIG_BTRFS_FS_CHECK_INTEGRITY=y and the disk with WCE=0.
btrfs: attempt to write superblock which references block M @5242880 (sdb2/5242880/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)!
------------[ cut here ]------------
WARNING: CPU: 28 PID: 843680 at fs/btrfs/check-integrity.c:2196 btrfsic_process_written_superblock+0x22a/0x2a0 [btrfs]
CPU: 28 PID: 843680 Comm: umount Not tainted 5.15.0-0.rc5.39.el8.x86_64 #1
Hardware name: Dell Inc. Precision T7610/0NK70N, BIOS A18 09/11/2019
RIP: 0010:btrfsic_process_written_superblock+0x22a/0x2a0 [btrfs]
RSP: 0018:ffffb642afb47940 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 00000000ffffffff RSI: ffff8b722fc97d00 RDI: ffff8b722fc97d00
RBP: ffff8b5601c00000 R08: 0000000000000000 R09: c0000000ffff7fff
R10: 0000000000000001 R11: ffffb642afb476f8 R12: ffffffffffffffff
R13: ffffb642afb47974 R14: ffff8b5499254c00 R15: 0000000000000003
FS: 00007f00a06d4080(0000) GS:ffff8b722fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff5cff5ff0 CR3: 00000001c0c2a006 CR4: 00000000001706e0
Call Trace:
btrfsic_process_written_block+0x2f7/0x850 [btrfs]
__btrfsic_submit_bio.part.19+0x310/0x330 [btrfs]
? bio_associate_blkg_from_css+0xa4/0x2c0
btrfsic_submit_bio+0x18/0x30 [btrfs]
write_dev_supers+0x81/0x2a0 [btrfs]
? find_get_pages_range_tag+0x219/0x280
? pagevec_lookup_range_tag+0x24/0x30
? __filemap_fdatawait_range+0x6d/0xf0
? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e
? find_first_extent_bit+0x9b/0x160 [btrfs]
? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e
write_all_supers+0x1b3/0xa70 [btrfs]
? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e
btrfs_commit_transaction+0x59d/0xac0 [btrfs]
close_ctree+0x11d/0x339 [btrfs]
generic_shutdown_super+0x71/0x110
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x31/0x70
cleanup_mnt+0xb8/0x140
task_work_run+0x6d/0xb0
exit_to_user_mode_prepare+0x1f0/0x200
syscall_exit_to_user_mode+0x12/0x30
do_syscall_64+0x46/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f009f711dfb
RSP: 002b:00007fff5cff7928 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
RAX: 0000000000000000 RBX: 000055b68c6c9970 RCX: 00007f009f711dfb
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055b68c6c9b50
RBP: 0000000000000000 R08: 000055b68c6ca900 R09: 00007f009f795580
R10: 0000000000000000 R11: 0000000000000246 R12: 000055b68c6c9b50
R13: 00007f00a04bf184 R14: 0000000000000000 R15: 00000000ffffffff
---[ end trace 2c4b82abcef9eec4 ]---
S-65536(sdb2/65536/1)
-->
M-1064960(sdb2/1064960/1)
Reviewed-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 45da9c1767ac31857df572f0a909fbe88fd5a7e9 upstream.
Ordered work functions aren't guaranteed to be handled by the same thread
which executed the normal work functions. The only way execution between
normal/ordered functions is synchronized is via the WORK_DONE_BIT,
unfortunately the used bitops don't guarantee any ordering whatsoever.
This manifested as seemingly inexplicable crashes on ARM64, where
async_chunk::inode is seen as non-null in async_cow_submit which causes
submit_compressed_extents to be called and crash occurs because
async_chunk::inode suddenly became NULL. The call trace was similar to:
pc : submit_compressed_extents+0x38/0x3d0
lr : async_cow_submit+0x50/0xd0
sp : ffff800015d4bc20
<registers omitted for brevity>
Call trace:
submit_compressed_extents+0x38/0x3d0
async_cow_submit+0x50/0xd0
run_ordered_work+0xc8/0x280
btrfs_work_helper+0x98/0x250
process_one_work+0x1f0/0x4ac
worker_thread+0x188/0x504
kthread+0x110/0x114
ret_from_fork+0x10/0x18
Fix this by adding respective barrier calls which ensure that all
accesses preceding setting of WORK_DONE_BIT are strictly ordered before
setting the flag. At the same time add a read barrier after reading of
WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads
would be strictly ordered after reading the bit. This in turn ensures
are all accesses before WORK_DONE_BIT are going to be strictly ordered
before any access that can occur in ordered_func.
Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: 08a9ff326418 ("btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue")
CC: stable@vger.kernel.org # 4.4+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2011928
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Chris Murphy <chris@colorremedies.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c78a5e7aa835c4f08a7c90fe02d19f95a776f29 upstream.
In open_ctree() in btrfs_check_rw_degradable() [1], we check each block
group individually if at least the minimum number of devices is available
for that profile. If all the devices are available, then we don't have to
check degradable.
[1]
open_ctree()
::
3559 if (!sb_rdonly(sb) && !btrfs_check_rw_degradable(fs_info, NULL)) {
Also before calling btrfs_check_rw_degradable() in open_ctee() at the
line number shown below [2] we call btrfs_read_chunk_tree() and down to
add_missing_dev() to record number of missing devices.
[2]
open_ctree()
::
3454 ret = btrfs_read_chunk_tree(fs_info);
btrfs_read_chunk_tree()
read_one_chunk() / read_one_dev()
add_missing_dev()
So, check if there is any missing device before btrfs_check_rw_degradable()
in open_ctree().
Also, with this the mount command could save ~16ms.[3] in the most
common case, that is no device is missing.
[3]
1) * 16934.96 us | btrfs_check_rw_degradable [btrfs]();
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10adb1152d957a4d570ad630f93a88bb961616c1 upstream.
At replay_dir_deletes(), if find_dir_range() returns an error we break out
of the main while loop and then assign a value of 0 (success) to the 'ret'
variable, resulting in completely ignoring that an error happened. Fix
that by jumping to the 'out' label when find_dir_range() returns an error
(negative value).
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d03dbebba2594d2e6fbf3b5dd9060c5a835de3b upstream.
Reported bug: https://github.com/kdave/btrfs-progs/issues/389
There's a problem with scrub reporting aborted status but returning
error code 0, on a filesystem with missing and readded device.
Roughly these steps:
- mkfs -d raid1 dev1 dev2
- fill with data
- unmount
- make dev1 disappear
- mount -o degraded
- copy more data
- make dev1 appear again
Running scrub afterwards reports that the command was aborted, but the
system log message says the exit code was 0.
It seems that the cause of the error is decrementing
fs_devices->missing_devices but not clearing device->dev_state. Every
time we umount filesystem, it would call close_ctree, And it would
eventually involve btrfs_close_one_device to close the device, but it
only decrements fs_devices->missing_devices but does not clear the
device BTRFS_DEV_STATE_MISSING bit. Worse, this bug will cause Integer
Overflow, because every time umount, fs_devices->missing_devices will
decrease. If fs_devices->missing_devices value hit 0, it would overflow.
With added debugging:
loop1: detected capacity change from 0 to 20971520
BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 1 transid 21 /dev/loop1 scanned by systemd-udevd (2311)
loop2: detected capacity change from 0 to 20971520
BTRFS: device fsid 56ad51f1-5523-463b-8547-c19486c51ebb devid 2 transid 17 /dev/loop2 scanned by systemd-udevd (2313)
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): using free space tree
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): using free space tree
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 0
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): using free space tree
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000f706684d /dev/loop1 18446744073709551615
BTRFS warning (device loop1): devid 2 uuid 6635ac31-56dd-4852-873b-c60f5e2d53d2 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 18446744073709551615
If fs_devices->missing_devices is 0, next time it would be 18446744073709551615
After apply this patch, the fs_devices->missing_devices seems to be
right:
$ truncate -s 10g test1
$ truncate -s 10g test2
$ losetup /dev/loop1 test1
$ losetup /dev/loop2 test2
$ mkfs.btrfs -draid1 -mraid1 /dev/loop1 /dev/loop2 -f
$ losetup -d /dev/loop2
$ mount -o degraded /dev/loop1 /mnt/1
$ umount /mnt/1
$ mount -o degraded /dev/loop1 /mnt/1
$ umount /mnt/1
$ mount -o degraded /dev/loop1 /mnt/1
$ umount /mnt/1
$ dmesg
loop1: detected capacity change from 0 to 20971520
loop2: detected capacity change from 0 to 20971520
BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 1 transid 5 /dev/loop1 scanned by mkfs.btrfs (1863)
BTRFS: device fsid 15aa1203-98d3-4a66-bcae-ca82f629c2cd devid 2 transid 5 /dev/loop2 scanned by mkfs.btrfs (1863)
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): disk space caching is enabled
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1
BTRFS info (device loop1): checking UUID tree
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): disk space caching is enabled
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1
BTRFS info (device loop1): flagging fs with big metadata feature
BTRFS info (device loop1): allowing degraded mounts
BTRFS info (device loop1): disk space caching is enabled
BTRFS info (device loop1): has skinny extents
BTRFS info (device loop1): before clear_missing.00000000975bd577 /dev/loop1 0
BTRFS warning (device loop1): devid 2 uuid 8b333791-0b3f-4f57-b449-1c1ab6b51f38 is missing
BTRFS info (device loop1): before clear_missing.0000000000000000 /dev/loop2 1
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Li Zhang <zhanglikernel@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 77a5b9e3d14cbce49ceed2766b2003c034c066dc ]
Currently inode_in_dir() ignores errors returned from
btrfs_lookup_dir_index_item() and from btrfs_lookup_dir_item(), treating
any errors as if the directory entry does not exists in the fs/subvolume
tree, which is obviously not correct, as we can get errors such as -EIO
when reading extent buffers while searching the fs/subvolume's tree.
Fix that by making inode_in_dir() return the errors and making its only
caller, add_inode_ref(), deal with returned errors as well.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cfd312695b71df04c3a2597859ff12c470d1e2e4 upstream.
At replay_one_name(), we are treating any error from btrfs_lookup_inode()
as if the inode does not exists. Fix this by checking for an error and
returning it to the caller.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52db77791fe24538c8aa2a183248399715f6b380 upstream.
At __inode_add_ref(), we treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.
So fix that and return the error to the caller when it is not -ENOENT.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e15ac6413745e3def00e663de00aea5a717311c1 upstream.
At replay_one_one(), we are treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.
So fix that and return the error to the caller when it is not -ENOENT.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d977e0eba234e01a60bdde27314dc21374201b3 upstream.
This crash was observed with a failed assertion on device close:
BTRFS: Transaction aborted (error -28)
WARNING: CPU: 1 PID: 3902 at fs/btrfs/extent-tree.c:2150 btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
Modules linked in: btrfs blake2b_generic libcrc32c crc32c_intel xor zstd_decompress zstd_compress xxhash lzo_compress lzo_decompress raid6_pq loop
CPU: 1 PID: 3902 Comm: kworker/u8:4 Not tainted 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
RIP: 0010:btrfs_run_delayed_refs+0x1d2/0x1e0 [btrfs]
RSP: 0018:ffffb7a5452d7d80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff97834176a378 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff97835195d388
R13: 0000000005b08000 R14: ffff978385484000 R15: 000000000000016c
FS: 0000000000000000(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190d003fe8 CR3: 000000002a81e005 CR4: 0000000000170ea0
Call Trace:
flush_space+0x197/0x2f0 [btrfs]
btrfs_async_reclaim_metadata_space+0x139/0x300 [btrfs]
process_one_work+0x262/0x5e0
worker_thread+0x4c/0x320
? process_one_work+0x5e0/0x5e0
kthread+0x144/0x170
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
irq event stamp: 19334989
hardirqs last enabled at (19334997): [<ffffffffab0e0c87>] console_unlock+0x2b7/0x400
hardirqs last disabled at (19335006): [<ffffffffab0e0d0d>] console_unlock+0x33d/0x400
softirqs last enabled at (19334900): [<ffffffffaba0030d>] __do_softirq+0x30d/0x574
softirqs last disabled at (19334893): [<ffffffffab0721ec>] irq_exit_rcu+0x12c/0x140
---[ end trace 45939e308e0dd3c7 ]---
BTRFS: error (device vdd) in btrfs_run_delayed_refs:2150: errno=-28 No space left
BTRFS info (device vdd): forced readonly
BTRFS warning (device vdd): failed setting block group ro: -30
BTRFS info (device vdd): suspending dev_replace for unmount
assertion failed: !test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &device->dev_state), in fs/btrfs/volumes.c:1150
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3431!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 3982 Comm: umount Tainted: G W 5.14.0-rc5-default+ #1532
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs]
RSP: 0018:ffffb7a5454c7db8 EFLAGS: 00010246
RAX: 0000000000000068 RBX: ffff978364b91c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffffabee13c4 RDI: 00000000ffffffff
RBP: ffff9783523a4c00 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff9783523a4d18
R13: 0000000000000000 R14: 0000000000000004 R15: 0000000000000003
FS: 00007f61c8f42800(0000) GS:ffff9783bd800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000056190cffa810 CR3: 0000000030b96002 CR4: 0000000000170ea0
Call Trace:
btrfs_close_one_device.cold+0x11/0x55 [btrfs]
close_fs_devices+0x44/0xb0 [btrfs]
btrfs_close_devices+0x48/0x160 [btrfs]
generic_shutdown_super+0x69/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x2c/0xa0
cleanup_mnt+0x144/0x1b0
task_work_run+0x59/0xa0
exit_to_user_mode_loop+0xe7/0xf0
exit_to_user_mode_prepare+0xaf/0xf0
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x4a/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
This happens when close_ctree is called while a dev_replace hasn't
completed. In close_ctree, we suspend the dev_replace, but keep the
replace target around so that we can resume the dev_replace procedure
when we mount the root again. This is the call trace:
close_ctree():
btrfs_dev_replace_suspend_for_unmount();
btrfs_close_devices():
btrfs_close_fs_devices():
btrfs_close_one_device():
ASSERT(!test_bit(BTRFS_DEV_STATE_REPLACE_TGT,
&device->dev_state));
However, since the replace target sticks around, there is a device
with BTRFS_DEV_STATE_REPLACE_TGT set on close, and we fail the
assertion in btrfs_close_one_device.
To fix this, if we come across the replace target device when
closing, we should properly reset it back to allocation state. This
fix also ensures that if a non-target device has a corrupted state and
has the BTRFS_DEV_STATE_REPLACE_TGT bit set, the assertion will still
catch the error.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: b2a616676839 ("btrfs: fix rw device counting in __btrfs_free_extra_devids")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e9655763b82a91e4c341835bb504a2b1590f984 upstream.
This reverts commit f2165627319ffd33a6217275e5690b1ab5c45763.
[BUG]
It's no longer possible to create compressed inline extent after commit
f2165627319f ("btrfs: compression: don't try to compress if we don't
have enough pages").
[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.
- Compressed inline write
The data is always smaller than one sector and the test lacks the
condition to properly recognize a non-inline extent.
- Compressed subpage write
For the incoming subpage compressed write support, we require page
alignment of the delalloc range.
And for 64K page size, we can compress just one page into smaller
sectors.
For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback. The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.
[FIX]
Fix it by reverting the offending commit.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net
Fixes: f2165627319f ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 240246f6b913b0c23733cfd2def1d283f8cc9bbe ]
In compression write endio sequence, the range which the compressed_bio
writes is marked as uptodate if the last bio of the compressed (sub)bios
is completed successfully. There could be previous bio which may
have failed which is recorded in cb->errors.
Set the writeback range as uptodate only if cb->errors is zero, as opposed
to checking only the last bio's status.
Backporting notes: in all versions up to 4.4 the last argument is always
replaced by "!cb->errors".
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b2a616676839e2a6b02c8e40be7f886f882ed194 upstream.
When removing a writeable device in __btrfs_free_extra_devids, the rw
device count should be decremented.
This error was caught by Syzbot which reported a warning in
close_fs_devices:
WARNING: CPU: 1 PID: 9355 at fs/btrfs/volumes.c:1168 close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
Modules linked in:
CPU: 0 PID: 9355 Comm: syz-executor552 Not tainted 5.13.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
RSP: 0018:ffffc9000333f2f0 EFLAGS: 00010293
RAX: ffffffff8365f5c3 RBX: 0000000000000001 RCX: ffff888029afd4c0
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff88802846f508 R08: ffffffff8365f525 R09: ffffed100337d128
R10: ffffed100337d128 R11: 0000000000000000 R12: dffffc0000000000
R13: ffff888019be8868 R14: 1ffff1100337d10d R15: 1ffff1100337d10a
FS: 00007f6f53828700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000047c410 CR3: 00000000302a6000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
btrfs_close_devices+0xc9/0x450 fs/btrfs/volumes.c:1180
open_ctree+0x8e1/0x3968 fs/btrfs/disk-io.c:3693
btrfs_fill_super fs/btrfs/super.c:1382 [inline]
btrfs_mount_root+0xac5/0xc60 fs/btrfs/super.c:1749
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1498
fc_mount fs/namespace.c:993 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1023
btrfs_mount+0x3d3/0xb50 fs/btrfs/super.c:1809
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1498
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0x196f/0x2be0 fs/namespace.c:3235
do_mount fs/namespace.c:3248 [inline]
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
Because fs_devices->rw_devices was not 0 after
closing all devices. Here is the call trace that was observed:
btrfs_mount_root():
btrfs_scan_one_device():
device_list_add(); <---------------- device added
btrfs_open_devices():
open_fs_devices():
btrfs_open_one_device(); <-------- writable device opened,
rw device count ++
btrfs_fill_super():
open_ctree():
btrfs_free_extra_devids():
__btrfs_free_extra_devids(); <--- writable device removed,
rw device count not decremented
fail_tree_roots:
btrfs_close_devices():
close_fs_devices(); <------- rw device count off by 1
As a note, prior to commit cf89af146b7e ("btrfs: dev-replace: fail
mount if we don't have replace item with target device"), rw_devices
was decremented on removing a writable device in
__btrfs_free_extra_devids only if the BTRFS_DEV_STATE_REPLACE_TGT bit
was not set for the device. However, this check does not need to be
reinstated as it is now redundant and incorrect.
In __btrfs_free_extra_devids, we skip removing the device if it is the
target for replacement. This is done by checking whether device->devid
== BTRFS_DEV_REPLACE_DEVID. Since BTRFS_DEV_STATE_REPLACE_TGT is set
only on the device with devid BTRFS_DEV_REPLACE_DEVID, no devices
should have the BTRFS_DEV_STATE_REPLACE_TGT bit set after the check,
and so it's redundant to test for that bit.
Additionally, following commit 82372bc816d7 ("Btrfs: make
the logic of source device removing more clear"), rw_devices is
incremented whenever a writeable device is added to the alloc
list (including the target device in btrfs_dev_replace_finishing), so
all removals of writable devices from the alloc list should also be
accompanied by a decrement to rw_devices.
Reported-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Fixes: cf89af146b7e ("btrfs: dev-replace: fail mount if we don't have replace item with target device")
CC: stable@vger.kernel.org # 5.10+
Tested-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2165627319ffd33a6217275e5690b1ab5c45763 upstream
The early check if we should attempt compression does not take into
account the number of input pages. It can happen that there's only one
page, eg. a tail page after some ranges of the BTRFS_MAX_UNCOMPRESSED
have been processed, or an isolated page that won't be converted to an
inline extent.
The single page would be compressed but a later check would drop it
again because the result size must be at least one block shorter than
the input. That can never work with just one page.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1aeb6b563aea18cd55c73cf666d1d3245a00f08c ]
When a log recovery is in progress, lots of operations have to take that
into account, so we keep this status per tree during the operation. Long
time ago error handling revamp patch 79787eaab461 ("btrfs: replace many
BUG_ONs with proper error handling") removed clearing of the status in
an error branch. Add it back as was intended in e02119d5a7b4 ("Btrfs:
Add a write ahead tree log to optimize synchronous operations").
There are probably no visible effects, log replay is done only during
mount and if it fails all structures are cleared so the stale status
won't be kept.
Fixes: 79787eaab461 ("btrfs: replace many BUG_ONs with proper error handling")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b05fbcc36be1f8597a1febef4892053a0b2f3f60 ]
With a config having PAGE_SIZE set to 256K, BTRFS build fails
with the following message
include/linux/compiler_types.h:326:38: error: call to
'__compiletime_assert_791' declared with attribute error:
BUILD_BUG_ON failed: (BTRFS_MAX_COMPRESSED % PAGE_SIZE) != 0
BTRFS_MAX_COMPRESSED being 128K, BTRFS cannot support platforms with
256K pages at the time being.
There are two platforms that can select 256K pages:
- hexagon
- powerpc
Disable BTRFS when 256K page size is selected. Supporting this would
require changes to the subpage mode that's currently being developed.
Given that 256K is many times larger than page sizes commonly used and
for what the algorithms and structures have been tuned, it's out of
scope and disabling build is a reasonable option.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04587ad9bef6ce9d510325b4ba9852b6129eebdb ]
If we fail to update the delayed inode we need to abort the transaction,
because we could leave an inode with the improper counts or some other
such corruption behind.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb385bedded3ccbd794559600de4a09448810f4a ]
If we get an error while looking up the inode item we'll simply bail
without cleaning up the delayed node. This results in this style of
warning happening on commit:
WARNING: CPU: 0 PID: 76403 at fs/btrfs/delayed-inode.c:1365 btrfs_assert_delayed_root_empty+0x5b/0x90
CPU: 0 PID: 76403 Comm: fsstress Tainted: G W 5.13.0-rc1+ #373
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:btrfs_assert_delayed_root_empty+0x5b/0x90
RSP: 0018:ffffb8bb815a7e50 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff95d6d07e1888 RCX: ffff95d6c0fa3000
RDX: 0000000000000002 RSI: 000000000029e91c RDI: ffff95d6c0fc8060
RBP: ffff95d6c0fc8060 R08: 00008d6d701a2c1d R09: 0000000000000000
R10: ffff95d6d1760ea0 R11: 0000000000000001 R12: ffff95d6c15a4d00
R13: ffff95d6c0fa3000 R14: 0000000000000000 R15: ffffb8bb815a7e90
FS: 00007f490e8dbb80(0000) GS:ffff95d73bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6e75555cb0 CR3: 00000001101ce001 CR4: 0000000000370ef0
Call Trace:
btrfs_commit_transaction+0x43c/0xb00
? finish_wait+0x80/0x80
? vfs_fsync_range+0x90/0x90
iterate_supers+0x8c/0x100
ksys_sync+0x50/0x90
__do_sys_sync+0xa/0x10
do_syscall_64+0x3d/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Because the iref isn't dropped and this leaves an elevated node->count,
so any release just re-queues it onto the delayed inodes list. Fix this
by going to the out label to handle the proper cleanup of the delayed
node.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6819703f5a365c95488b07066a8744841bf14231 upstream.
The defrag loop processes leaves in batches and starting transaction for
each. The whole defragmentation on a given root is protected by a bit
but in case the transaction fails, the bit is not cleared
In case the transaction fails the bit would prevent starting
defragmentation again, so make sure it's cleared.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8ac76cdd1755b21e8c008c28d0b7251c0b14986 upstream.
During an incremental send operation, when processing the new references
for the current inode, we might send an unlink operation for another inode
that has a conflicting path and has more than one hard link. However this
path was computed and cached before we processed previous new references
for the current inode. We may have orphanized a directory of that path
while processing a previous new reference, in which case the path will
be invalid and cause the receiver process to fail.
The following reproducer triggers the problem and explains how/why it
happens in its comments:
$ cat test-send-unlink.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
# Create our test files and directory. Inode 259 (file3) has two hard
# links.
touch $MNT/file1
touch $MNT/file2
touch $MNT/file3
mkdir $MNT/A
ln $MNT/file3 $MNT/A/hard_link
# Filesystem looks like:
#
# . (ino 256)
# |----- file1 (ino 257)
# |----- file2 (ino 258)
# |----- file3 (ino 259)
# |----- A/ (ino 260)
# |---- hard_link (ino 259)
#
# Now create the base snapshot, which is going to be the parent snapshot
# for a later incremental send.
btrfs subvolume snapshot -r $MNT $MNT/snap1
btrfs send -f /tmp/snap1.send $MNT/snap1
# Move inode 257 into directory inode 260. This results in computing the
# path for inode 260 as "/A" and caching it.
mv $MNT/file1 $MNT/A/file1
# Move inode 258 (file2) into directory inode 260, with a name of
# "hard_link", moving first inode 259 away since it currently has that
# location and name.
mv $MNT/A/hard_link $MNT/tmp
mv $MNT/file2 $MNT/A/hard_link
# Now rename inode 260 to something else (B for example) and then create
# a hard link for inode 258 that has the old name and location of inode
# 260 ("/A").
mv $MNT/A $MNT/B
ln $MNT/B/hard_link $MNT/A
# Filesystem now looks like:
#
# . (ino 256)
# |----- tmp (ino 259)
# |----- file3 (ino 259)
# |----- B/ (ino 260)
# | |---- file1 (ino 257)
# | |---- hard_link (ino 258)
# |
# |----- A (ino 258)
# Create another snapshot of our subvolume and use it for an incremental
# send.
btrfs subvolume snapshot -r $MNT $MNT/snap2
btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2
# Now unmount the filesystem, create a new one, mount it and try to
# apply both send streams to recreate both snapshots.
umount $DEV
mkfs.btrfs -f $DEV >/dev/null
mount $DEV $MNT
# First add the first snapshot to the new filesystem by applying the
# first send stream.
btrfs receive -f /tmp/snap1.send $MNT
# The incremental receive operation below used to fail with the
# following error:
#
# ERROR: unlink A/hard_link failed: No such file or directory
#
# This is because when send is processing inode 257, it generates the
# path for inode 260 as "/A", since that inode is its parent in the send
# snapshot, and caches that path.
#
# Later when processing inode 258, it first processes its new reference
# that has the path of "/A", which results in orphanizing inode 260
# because there is a a path collision. This results in issuing a rename
# operation from "/A" to "/o260-6-0".
#
# Finally when processing the new reference "B/hard_link" for inode 258,
# it notices that it collides with inode 259 (not yet processed, because
# it has a higher inode number), since that inode has the name
# "hard_link" under the directory inode 260. It also checks that inode
# 259 has two hardlinks, so it decides to issue a unlink operation for
# the name "hard_link" for inode 259. However the path passed to the
# unlink operation is "/A/hard_link", which is incorrect since currently
# "/A" does not exists, due to the orphanization of inode 260 mentioned
# before. The path is incorrect because it was computed and cached
# before the orphanization. This results in the receiver to fail with
# the above error.
btrfs receive -f /tmp/snap2.send $MNT
umount $MNT
When running the test, it fails like this:
$ ./test-send-unlink.sh
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
At subvol /mnt/sdi/snap1
Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
At subvol /mnt/sdi/snap2
At subvol snap1
At snapshot snap2
ERROR: unlink A/hard_link failed: No such file or directory
Fix this by recomputing a path before issuing an unlink operation when
processing the new references for the current inode if we previously
have orphanized a directory.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sasha Levin
Filipe Manana
ChenXiaoSong
Anand Jain
Josef Bacik
Zhang Xiaoxu
David Sterba
Goldwyn Rodrigues
Qu Wenruo
Ethan Lien
Dāvis Mosāns
Wang Yugui
Nikolay Borisov
Li Zhang
Desmond Cheong Zhi Xi
NeilBrown
Christophe Leroy