IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 3f7b75abf41cc4143aa295f62acbb060a012868d ]
Fix the build caused by missing kmsan_handle_dma() and is_power_of_2() that
are used in drivers/virtio/virtio_ring.c.
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Message-Id: <20230110034310.779744-1-mie@igel.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a082086aa200852545cf15159213582c0c80eba ]
When set/restore sysctl value, we should quote the value as some keys
may have multi values, e.g. net.ipv4.ping_group_range
Fixes: f5ae57784ba8 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1fb466dff904e4a72282af336f2c355f011eec61 upstream.
Recently the kbuild robot reported two new errors:
>> lib/kunit/kunit-example-test.o: warning: objtool: .text.unlikely: unexpected end of section
>> arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_opcodes()
I don't know why they did not occur in my test setup but after digging
it I realized I had accidentally dropped a comma in
tools/objtool/check.c when I renamed rewind_stack_do_exit to
rewind_stack_and_make_dead.
Add that comma back to fix objtool errors.
Link: https://lkml.kernel.org/r/202112140949.Uq5sFKR1-lkp@intel.com
Fixes: 0e25498f8cd4 ("exit: Add and use make_task_dead.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream.
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebcb9464a2ae3a547e97de476575c82ece0e93e2 upstream.
It is possible to return a pointer to a local variable when looking up
the architecture name for the running system and no normalization is
done on that value, i.e. we may end up returning the uts.machine local
variable.
While this doesn't happen on most arches, as normalization takes place,
lets fix this by making that a static variable and optimize it a bit by
not always running uname(), only the first time.
Noticed in fedora rawhide running with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 26df05a8c1420ad3de314fdd407e7fc2058cc7aa ]
grub2 has submenus where to use grub-reboot, it requires:
grub-reboot X>Y
where X is the main index and Y is the submenu. Thus if you have:
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux ...
[...]
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option ...
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64 (recovery mode)' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux test' --class debian --class gnu-linux ...
[...]
}
And wanted to boot to the "Linux test" kernel, you need to run:
# grub-reboot 1>2
As 1 is the second top menu (the submenu) and 2 is the third of the sub
menu entries.
Have the grub.cfg parsing for grub2 handle such cases.
Cc: stable@vger.kernel.org
Fixes: a15ba91361d46 ("ktest: Add support for grub2")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 271e0c9dce1b02a825b3cc1a7aa1fab7c381d44b ]
This issue was first noticed when I was testing different kernels on
Oracle Linux 8 which as Fedora 30+ adopts BLS as default. Even though a
kernel entry was added successfully and the index of that kernel entry was
retrieved correctly, ktest still wouldn't reboot the system into
user-specified kernel.
The bug was spotted in subroutine reboot_to where the if-statement never
checks for REBOOT_TYPE "grub2bls", therefore the desired entry will not be
set for the next boot.
Add a check for "grub2bls" so that $grub_reboot $grub_number can
be run before a reboot if REBOOT_TYPE is "grub2bls" then we can boot to
the correct kernel.
Link: https://lkml.kernel.org/r/20201121021243.1532477-1-libo.chen@oracle.com
Cc: stable@vger.kernel.org
Fixes: ac2466456eaa ("ktest: introduce grub2bls REBOOT_TYPE option")
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Stable-dep-of: 26df05a8c142 ("kest.pl: Fix grub2 menu handling for rebooting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac2466456eaa0ff9b8cf647c4c52832024bc929f ]
Fedora 30 introduces Boot Loader Specification (BLS),
it changes around grub entry configuration.
kernel entries aren't in grub.cfg. We can get the entries
by "grubby --info=ALL" command.
Introduce grub2bls as REBOOT_TYPE option for BLS.
Link: http://lkml.kernel.org/r/20190509213647.6276-4-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Stable-dep-of: 26df05a8c142 ("kest.pl: Fix grub2 menu handling for rebooting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68911069f509ba3bf0f513d9af00309e07932906 ]
ktest fails if meta characters are in GRUB_MENU, for example
GRUB_MENU = 'Fedora (test)'
The failure happens because the meta characters are not escaped,
so the menu doesn't match in any entries in GRUB_FILE.
Use quotemeta() to escape the meta characters.
Link: http://lkml.kernel.org/r/20190417235823.18176-1-msys.mizuma@gmail.com
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Stable-dep-of: 26df05a8c142 ("kest.pl: Fix grub2 menu handling for rebooting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cf129830ee820f7fc90b98df193cd49d49344d09 upstream.
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71bdea6f798b425bc0003780b13e3fdecb16a010 upstream.
Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.
A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a9dfc46c67b52ad43b8e335e28f4cf8002c67793 ]
DWARF version 5 standard Sec 2.14 says that
Any debugging information entry representing the declaration of an object,
module, subprogram or type may have DW_AT_decl_file, DW_AT_decl_line and
DW_AT_decl_column attributes, each of whose value is an unsigned integer
constant.
So it should be an unsigned integer data. Also, even though the standard
doesn't clearly say the DW_AT_call_file is signed or unsigned, the
elfutils (eu-readelf) interprets it as unsigned integer data and it is
natural to handle it as unsigned integer data as same as DW_AT_decl_file.
This changes the DW_AT_call_file as unsigned integer data too.
Fixes: 3f4460a28fb2f73d ("perf probe: Filter out redundant inline-instances")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166761727445.480106.3738447577082071942.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f828929ab7f0dc3353e4a617f94f297fa8f3dec3 ]
Use dwarf_attr_integrate() instead of dwarf_attr() for generic attribute
acccessor functions, so that it can find the specified attribute from
abstact origin DIE etc.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166731051988.2100653.13595339994343449770.stgit@devnote3
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: a9dfc46c67b5 ("perf probe: Fix to get the DW_AT_decl_file and DW_AT_call_file as unsinged data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit de3ee3f63400a23954e7c1ad1cb8c20f29ab6fe3 upstream.
This change enables to extend CFLAGS and LDFLAGS from command line, e.g.
to extend compiler checks: make USERCFLAGS=-Werror USERLDFLAGS=-static
USERCFLAGS and USERLDFLAGS are documented in
Documentation/kbuild/makefiles.rst and Documentation/kbuild/kbuild.rst
This should be backported (down to 5.10) to improve previous kernel
versions testing as well.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220909103901.1503436-1-mic@digikod.net
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef784eebb56425eed6e9b16e7d47e5c00dcf9c38 upstream.
After a full run of a make_min_config test, I noticed there were a lot of
CONFIGs still enabled that really should not be. Looking at them, I
noticed they were all defined as "default y". The issue is that the test
simple removes the config and re-runs make oldconfig, which enables it
again because it is set to default 'y'. Instead, explicitly disable the
config with writing "# CONFIG_FOO is not set" to the file to keep it from
being set again.
With this change, one of my box's minconfigs went from 768 configs set,
down to 521 configs set.
Link: https://lkml.kernel.org/r/20221202115936.016fce23@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 0a05c769a9de5 ("ktest: Added config_bisect test type")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f4ab7da904ab7027ccd43ddb4f0094e932a5877 ]
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c904b ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f520ce17920b3cdfbd2479b3ccf27f9706219d0 ]
perf doesn't provide proper symbol information for specially crafted
.debug files.
Sometimes .debug file may not have similar program header as runtime
ELF file. For example if we generate .debug file using objcopy
--only-keep-debug resulting file will not contain .text, .data and
other runtime sections. That means corresponding program headers will
have zero FileSiz and modified Offset.
Example: program header of text section of libxxx.so:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x00000000003d3000 0x00000000003d3000 0x00000000003d3000
0x000000000055ae80 0x000000000055ae80 R E 0x1000
Same program header after executing:
objcopy --only-keep-debug libxxx.so libxxx.so.debug
LOAD 0x0000000000001000 0x00000000003d3000 0x00000000003d3000
0x0000000000000000 0x000000000055ae80 R E 0x1000
Offset and FileSiz have been changed.
Following formula will not provide correct value, if program header
taken from .debug file (syms_ss):
sym.st_value -= phdr.p_vaddr - phdr.p_offset;
Correct program header information is located inside runtime ELF
file (runtime_ss).
Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols")
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsab@vmware.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Vasavi Sirnapalli <vsirnapalli@vmware.com>
Link: http://lore.kernel.org/lkml/1669198696-50547-1-git-send-email-akaher@vmware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cc81d5c81af0dee54da9a67a3ebe4be076a13db ]
syscall(3) returns -1 and sets errno on error, unlike "syscall"
instruction.
Systems which have <= 32/64 CPUs are unaffected. Test won't bounce
to all CPUs before completing if there are more of them.
Link: https://lkml.kernel.org/r/Y1bUiT7VRXlXPQa1@p183
Fixes: 1f5bd0547654 ("proc: selftests: test /proc/uptime")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1d6cd88c8973cfb08ee85722488b1d6d5d16327 ]
In some platform, the schedule event may came slowly, delay 100ms can't
cover it.
I was notice that on my board which running in low cpu_freq,and this
selftests allways gose fail.
So maybe we can check more times here to wait longer.
Fixes: 43bb45da82f9 ("selftests: ftrace: Add a selftest to test event enable/disable func trigger")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d72eadbc1d2866fc047edd4535ffb0298fe240be upstream.
tests/attr.c invokes attr.py via an explicit invocation of Python
($PYTHON) so there is therefore no need for an explicit shebang.
Also most distros follow pep-0394 which recommends that /usr/bin/python
refer only to v2 and so may not exist on the system (if PYTHON=python3).
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20190124005229.16146-5-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 85a0506c073332a3057f5a9635fa0d4db5a8e03b ]
When testing in kci_test_ipsec_offload, srcip is configured as $dstip,
it should add xfrm policy rule in instead of out.
The test result of this patch is as follows:
PASS: ipsec_offload
Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221201082246.14131-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f15c682ac5a778feb8e343f9057b89beb40d85b ]
The rcutorture scripts currently expect the user to create the
tools/testing/selftests/rcutorture/initrd directory. Should the user
fail to do this, the kernel build will fail with obscure and confusing
error messages. This commit therefore adds explicit checks for the
tools/testing/selftests/rcutorture/initrd directory, and if not present,
creates one on systems on which dracut is installed. If this directory
could not be created, a less obscure error message is emitted and the
test is aborted.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Connor Shu <Connor.Shu@ibm.com>
[ paulmck: Adapt the script to fit into the rcutorture framework and
severely abbreviate the initrd/init script. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a435874bf626f55d7147026b059008c8de89fbb8 upstream.
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/vm`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Link: https://lkml.kernel.org/r/1668825419-30584-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit beb7d862ed4ac6aa14625418970f22a7d55b8615 ]
Handle the scenario where the build is launched with the ARCH envvar
defined as x86_64.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03cab65a07e083b6c1010fbc8f9b817e9aca75d9 ]
Don't use the test-specific header files as source files to force a
target dependency, as clang will complain if more than one source file
is used for a compile command with a single '-o' flag.
Use the proper Makefile variables instead as defined in
tools/testing/selftests/lib.mk.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2632daebafd04746b4b96c2f26a6021bc38f6209 upstream.
DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.
Unify and correct naming while at it.
Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b1299322016731d56807aa49254a5ea3080b6b3 upstream.
tl;dr: The Enhanced IBRS mitigation for Spectre v2 does not work as
documented for RET instructions after VM exits. Mitigate it with a new
one-entry RSB stuffing mechanism and a new LFENCE.
== Background ==
Indirect Branch Restricted Speculation (IBRS) was designed to help
mitigate Branch Target Injection and Speculative Store Bypass, i.e.
Spectre, attacks. IBRS prevents software run in less privileged modes
from affecting branch prediction in more privileged modes. IBRS requires
the MSR to be written on every privilege level change.
To overcome some of the performance issues of IBRS, Enhanced IBRS was
introduced. eIBRS is an "always on" IBRS, in other words, just turn
it on once instead of writing the MSR on every privilege level change.
When eIBRS is enabled, more privileged modes should be protected from
less privileged modes, including protecting VMMs from guests.
== Problem ==
Here's a simplification of how guests are run on Linux' KVM:
void run_kvm_guest(void)
{
// Prepare to run guest
VMRESUME();
// Clean up after guest runs
}
The execution flow for that would look something like this to the
processor:
1. Host-side: call run_kvm_guest()
2. Host-side: VMRESUME
3. Guest runs, does "CALL guest_function"
4. VM exit, host runs again
5. Host might make some "cleanup" function calls
6. Host-side: RET from run_kvm_guest()
Now, when back on the host, there are a couple of possible scenarios of
post-guest activity the host needs to do before executing host code:
* on pre-eIBRS hardware (legacy IBRS, or nothing at all), the RSB is not
touched and Linux has to do a 32-entry stuffing.
* on eIBRS hardware, VM exit with IBRS enabled, or restoring the host
IBRS=1 shortly after VM exit, has a documented side effect of flushing
the RSB except in this PBRSB situation where the software needs to stuff
the last RSB entry "by hand".
IOW, with eIBRS supported, host RET instructions should no longer be
influenced by guest behavior after the host retires a single CALL
instruction.
However, if the RET instructions are "unbalanced" with CALLs after a VM
exit as is the RET in #6, it might speculatively use the address for the
instruction after the CALL in #3 as an RSB prediction. This is a problem
since the (untrusted) guest controls this address.
Balanced CALL/RET instruction pairs such as in step #5 are not affected.
== Solution ==
The PBRSB issue affects a wide variety of Intel processors which
support eIBRS. But not all of them need mitigation. Today,
X86_FEATURE_RSB_VMEXIT triggers an RSB filling sequence that mitigates
PBRSB. Systems setting RSB_VMEXIT need no further mitigation - i.e.,
eIBRS systems which enable legacy IBRS explicitly.
However, such systems (X86_FEATURE_IBRS_ENHANCED) do not set RSB_VMEXIT
and most of them need a new mitigation.
Therefore, introduce a new feature flag X86_FEATURE_RSB_VMEXIT_LITE
which triggers a lighter-weight PBRSB mitigation versus RSB_VMEXIT.
The lighter-weight mitigation performs a CALL instruction which is
immediately followed by a speculative execution barrier (INT3). This
steers speculative execution to the barrier -- just like a retpoline
-- which ensures that speculation can never reach an unbalanced RET.
Then, ensure this CALL is retired before continuing execution with an
LFENCE.
In other words, the window of exposure is opened at VM exit where RET
behavior is troublesome. While the window is open, force RSB predictions
sampling for RET targets to a dead end at the INT3. Close the window
with the LFENCE.
There is a subset of eIBRS systems which are not vulnerable to PBRSB.
Add these systems to the cpu_vuln_whitelist[] as NO_EIBRS_PBRSB.
Future systems that aren't vulnerable will set ARCH_CAP_PBRSB_NO.
[ bp: Massage, incorporate review comments from Andy Cooper. ]
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
[ bp: Adjust patch to account for kvm entry being in c ]
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cba04f3136b658583adb191556f99d087589c1cc upstream.
For modules, names from kallsyms__parse() contain the module name which
meant that module symbols did not match exactly by name.
Fix by matching the name string up to the separating tab character.
Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026072736.2982-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72b2aa38191bcba28389b0e20bf6b4f15017ff2b upstream.
The iio_utils uses a digit calculation in order to know length of the
file name containing a buffer number. The digit calculation does not
work for number 0.
This leads to allocation of one character too small buffer for the
file-name when file name contains value '0'. (Eg. buffer0).
Fix digit calculation by returning one digit to be present for number
'0'.
Fixes: 096f9b862e60 ("tools:iio:iio_utils: implement digit calculation")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/Y0f+tKCz+ZAIoroQ@dc75zzyyyyyyyyyyyyycy-3.rev.dnainternet.fi
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a3d47071f0ced0431ef82a5fb6bd077ed9493db upstream.
uClibc segfaulted because NULL was passed as the format to fprintf().
That happened because one of the format strings was missing and
intel_pt_print_info() didn't check that before calling fprintf().
Add the missing format string, and check format is not NULL before calling
fprintf().
Fixes: 11fa7cb86b56d361 ("perf tools: Pass Intel PT information for decoding MTC and CYC")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7184aef9c0f7a81db8fd18d183ee42481d89bf35 ]
When `data` points to a boolean value, casting it to `int *` is problematic
and could lead to a wrong value being passed to `jsonw_bool`. Change the
cast to `bool *` instead.
Fixes: b12d6ec09730 ("bpf: btf: add btf print functionality")
Signed-off-by: Lam Thai <lamthai@arista.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220824225859.9038-1-lamthai@arista.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc7a319844891746135dc1f34ab9df78d636a3ac ]
The socket 2 bind the addr in use, bind should fail with EADDRINUSE. So
if bind success or errno != EADDRINUSE, testcase should be failed.
Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1663916557-10730-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b427df27b94aec1312cace48a746782a0925c53 ]
/proc/kallsyms and /proc/modules are compared before and after the copy
in order to ensure no changes during the copy.
However /proc/modules also might change due to reference counts changing
even though that does not make any difference.
Any modules loaded or unloaded should be visible in changes to kallsyms,
so it is not necessary to check /proc/modules also anyway.
Remove the comparison checking that /proc/modules is unchanged.
Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache")
Reported-by: Daniel Dao <dqminh@cloudflare.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Daniel Dao <dqminh@cloudflare.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit babd04386b1df8c364cdaa39ac0e54349502e1e5 ]
The missing header makes it hard for programs like elfutils to open
these files.
Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Lieven Hey <lieven.hey@kdab.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220915092910.711036-1-lieven.hey@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5366d2269139ba8eb6a906d73a0819947e3e4e0a upstream.
Commit 294f2fc6da27 ("bpf: Verifer, adjust_scalar_min_max_vals to always
call update_reg_bounds()") changed the way verifier logs some of its state,
adjust the test_align accordingly. Where possible, I tried to not copy-paste
the entire log line and resorted to dropping the last closing brace instead.
Fixes: 294f2fc6da27 ("bpf: Verifer, adjust_scalar_min_max_vals to always call update_reg_bounds()")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200515194904.229296-1-sdf@google.com
[OP: adjust for 4.19 selftests, apply only the relevant diffs]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.
The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):
// 1. Passes the verifier:
if (data + 8 > data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
// 2. Rejected by the verifier (should still pass):
if (data + 7 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:
// 3. Rejected by the verifier, but the check is stricter than in #1.
if (data + 8 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.
This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.
Fixes: fb2a311a31d3 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773b2 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
[OP: cherry-pick selftest changes only]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b245985a6de5ac18b5088c37068816d413fb8ed upstream.
Switch to new EVP API for detecting libcrypto, as Fedora 36 returns an
error when it encounters the deprecated function MD5_Init() and the others.
The error would be interpreted as missing libcrypto, while in reality it is
not.
Fixes: 6e8ccb4f624a73c5 ("tools/bpf: properly account for libbfd variations")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: llvm@lists.linux.dev
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220719170555.2576993-4-roberto.sassu@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c58cf40e3a1d2f47c09d3489857e9476316788a ]
A build with -D_FORTIFY_SOURCE=2 enabled will produce the following warnings:
sysfs.c:63:30: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-truncation=]
snprintf(filepath, 256, "%s/%s", path, filename);
^~
Bump up the buffer to PATH_MAX which is the limit and account for all of
the possible NUL and separators that could lead to exceeding the
allocated buffer sizes.
Fixes: 94f69966faf8 ("tools/thermal: Introduce tmon, a tool for thermal subsystem")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91cea6be90e436c55cde8770a15e4dac9d3032d0 ]
When genelf was introduced it tested for HAVE_LIBCRYPTO not
HAVE_LIBCRYPTO_SUPPORT, which is the define the feature test for openssl
defines, fix it.
This also adds disables the deprecation warning, someone has to fix this
to build with openssl 3.0 before the warning becomes a hard error.
Fixes: 9b07e27f88b9cd78 ("perf inject: Add jitdump mmap injection support")
Reported-by: 谭梓煊 <tanzixuan.me@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/YulpPqXSOG0Q4J1o@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d8f52ac5fa9eede7b7aa2f2d67c841d9eeb655f ]
The return value from system() is a waitpid-style integer. Do not return
it directly because with the implicit masking in exit() it will always
return 0. Access it with appropriate macros to really pass on errors.
Fixes: 7290ce1423c3 ("selftests/timers: Add clocksource-switch test from timetest suite")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a162977d20436be5678a8e21a8e58eb4616d86a ]
Toolchains with an include file 'sys/timex.h' based on 3.18 will have a
'clock_adjtime' definition added, so it can't be static in the code:
valid-adjtimex.c:43:12: error: static declaration of ‘clock_adjtime’ follows non-static declaration
Fixes: e03a58c320e1 ("kselftests: timers: Add adjtimex SETOFFSET validity tests")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf3f00378524adae16628cbadbd11ba7211863bb ]
BPF map name is limited to BPF_OBJ_NAME_LEN.
A map name is defined as being longer than BPF_OBJ_NAME_LEN,
it will be truncated to BPF_OBJ_NAME_LEN when a userspace program
calls libbpf to create the map. A pinned map also generates a path
in the /sys. If the previous program wanted to reuse the map，
it can not get bpf_map by name, because the name of the map is only
partially the same as the name which get from pinned path.
The syscall information below show that map name "process_pinned_map"
is truncated to "process_pinned_".
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/process_pinned_map",
bpf_fd=0, file_flags=0}, 144) = -1 ENOENT (No such file or directory)
bpf(BPF_MAP_CREATE, {map_type=BPF_MAP_TYPE_HASH, key_size=4,
value_size=4,max_entries=1024, map_flags=0, inner_map_fd=0,
map_name="process_pinned_",map_ifindex=0, btf_fd=3, btf_key_type_id=6,
btf_value_type_id=10,btf_vmlinux_value_type_id=0}, 72) = 4
This patch check that if the name of pinned map are the same as the
actual name for the first (BPF_OBJ_NAME_LEN - 1),
bpf map still uses the name which is included in bpf object.
Fixes: 26736eb9a483 ("tools: libbpf: allow map reuse")
Signed-off-by: Anquan Wu <leiqi96@hotmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/OSZP286MB1725CEA1C95C5CB8E7CCC53FB8869@OSZP286MB1725.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cf51bfe999524377fbb71becb583b4ca6d07cfc ]
Include sys/time.h and pthread.h in tmon.h, so that types
"pthread_mutex_t" and "struct timeval tv" are known when tmon.h
references them.
Without these headers, compiling tmon against musl-libc will fail with
these errors:
In file included from sysfs.c:31:0:
tmon.h:47:8: error: unknown type name 'pthread_mutex_t'
extern pthread_mutex_t input_lock;
^~~~~~~~~~~~~~~
make[3]: *** [<builtin>: sysfs.o] Error 1
make[3]: *** Waiting for unfinished jobs....
In file included from tui.c:31:0:
tmon.h:54:17: error: field 'tv' has incomplete type
struct timeval tv;
^~
make[3]: *** [<builtin>: tui.o] Error 1
make[2]: *** [Makefile:83: tmon] Error 2
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Acked-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
Tested-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
Fixes: 94f69966faf8 ("tools/thermal: Introduce tmon, a tool for thermal subsystem")
Link: https://lore.kernel.org/r/20220718031040.44714-1-f.fainelli@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d86612aacb7805f72873691a2644d7279ed0630 ]
When using 'perf mem' and 'perf c2c', an issue is observed that tool
reports the wrong offset for global data symbols. This is a common
issue on both x86 and Arm64 platforms.
Let's see an example, for a test program, below is the disassembly for
its .bss section which is dumped with objdump:
...
Disassembly of section .bss:
0000000000004040 <completed.0>:
...
0000000000004080 <buf1>:
...
00000000000040c0 <buf2>:
...
0000000000004100 <thread>:
...
First we used 'perf mem record' to run the test program and then used
'perf --debug verbose=4 mem report' to observe what's the symbol info
for 'buf1' and 'buf2' structures.
# ./perf mem record -e ldlat-loads,ldlat-stores -- false_sharing.exe 8
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf2 0x30a8-0x30e8
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 sh_addr: 0x4040 sh_offset: 0x3028
symbol__new: buf1 0x3068-0x30a8
...
The perf tool relies on libelf to parse symbols, in executable and
shared object files, 'st_value' holds a virtual address; 'sh_addr' is
the address at which section's first byte should reside in memory, and
'sh_offset' is the byte offset from the beginning of the file to the
first byte in the section. The perf tool uses below formula to convert
a symbol's memory address to a file address:
file_address = st_value - sh_addr + sh_offset
^
` Memory address
We can see the final adjusted address ranges for buf1 and buf2 are
[0x30a8-0x30e8) and [0x3068-0x30a8) respectively, apparently this is
incorrect, in the code, the structure for 'buf1' and 'buf2' specifies
compiler attribute with 64-byte alignment.
The problem happens for 'sh_offset', libelf returns it as 0x3028 which
is not 64-byte aligned, combining with disassembly, it's likely libelf
doesn't respect the alignment for .bss section, therefore, it doesn't
return the aligned value for 'sh_offset'.
Suggested by Fangrui Song, ELF file contains program header which
contains PT_LOAD segments, the fields p_vaddr and p_offset in PT_LOAD
segments contain the execution info. A better choice for converting
memory address to file address is using the formula:
file_address = st_value - p_vaddr + p_offset
This patch introduces elf_read_program_header() which returns the
program header based on the passed 'st_value', then it uses the formula
above to calculate the symbol file address; and the debugging log is
updated respectively.
After applying the change:
# ./perf --debug verbose=4 mem report
...
dso__load_sym_internal: adjusting symbol: st_value: 0x40c0 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf2 0x30c0-0x3100
...
dso__load_sym_internal: adjusting symbol: st_value: 0x4080 p_vaddr: 0x3d28 p_offset: 0x2d28
symbol__new: buf1 0x3080-0x30c0
...
Fixes: f17e04afaff84b5c ("perf report: Fix ELF symbol parsing")
Reported-by: Chang Rui <changruinj@gmail.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220724060013.171050-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83844aacab2015da1dba1df0cc61fc4b4c4e8076 ]
When packets are not received, they aren't received on $host1_if, so the
message talking about the second host not receiving them is incorrect.
Fix it.
Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a635d3e1c80626237fdae47a5545b6655d8d81c ]
The first host interface has by default no interest in receiving packets
MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc
filter and this might confuse the selftest.
Enable promiscuous mode such that the filter properly counts received
packets.
Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8e629b05f5d23f9649c901bef09fab8b0c2e4b9 ]
As mentioned in the blamed commit, flood_unicast_test() works by
checking the match count on a tc filter placed on the receiving
interface.
But the second host interface (host2_if) has no interest in receiving a
packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even
before the ingress tc filter gets to be executed. So we will incorrectly
get the message "Packet was not flooded when should", when in fact, the
packet was flooded as expected but dropped due to an unrelated reason,
at some other layer on the receiving side.
Force h2 to accept this packet by temporarily placing it in promiscuous
mode. Alternatively we could either deliver to its MAC address or use
tcpdump_start, but this has the fewest complications.
This fixes the "flooding" test from bridge_vlan_aware.sh and
bridge_vlan_unaware.sh, which calls flood_test from the lib.
Fixes: 236dd50bf67a ("selftests: forwarding: Add a test for flooded traffic")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b968080808f7f28b89aa495b7402ba48eb17ee93 upstream.
udpgso_bench.sh has been running its IPv6 TCP test with IPv4 arguments
since its initial conmit. Looks like a typo.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Cc: willemb@google.com
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220623000234.61774-1-dmichail@fungible.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
