IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit a7036191277f9fa68d92f2071ddc38c09b1e5ee5 upstream
In 801c6058d14a ("bpf: Fix leakage of uninitialized bpf stack under
speculation") we replaced masking logic with direct loads of immediates
if the register is a known constant. Given in this case we do not apply
any masking, there is also no reason for the operation to be truncated
under the speculative domain.
Therefore, there is also zero reason for the verifier to branch-off and
simulate this case, it only needs to do it for unknown but bounded scalars.
As a side-effect, this also enables few test cases that were previously
rejected due to simulation under zero truncation.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb01a1bba579b4b1c5566af24d95f1767859771e upstream
Masking direction as indicated via mask_to_left is considered to be
calculated once and then used to derive pointer limits. Thus, this
needs to be placed into bpf_sanitize_info instead so we can pass it
to sanitize_ptr_alu() call after the pointer move. Piotr noticed a
corner case where the off reg causes masking direction change which
then results in an incorrect final aux->alu_limit.
Fixes: 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic mask")
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d0220f6861d713213b015b582e9f21e5b28d2e0 upstream
Add a container structure struct bpf_sanitize_info which holds
the current aux info, and update call-sites to sanitize_ptr_alu()
to pass it in. This is needed for passing in additional state
later on.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 801c6058d14a82179a7ee17a4b532cac6fad067f upstream.
The current implemented mechanisms to mitigate data disclosure under
speculation mainly address stack and map value oob access from the
speculative domain. However, Piotr discovered that uninitialized BPF
stack is not protected yet, and thus old data from the kernel stack,
potentially including addresses of kernel structures, could still be
extracted from that 512 bytes large window. The BPF stack is special
compared to map values since it's not zero initialized for every
program invocation, whereas map values /are/ zero initialized upon
their initial allocation and thus cannot leak any prior data in either
domain. In the non-speculative domain, the verifier ensures that every
stack slot read must have a prior stack slot write by the BPF program
to avoid such data leaking issue.
However, this is not enough: for example, when the pointer arithmetic
operation moves the stack pointer from the last valid stack offset to
the first valid offset, the sanitation logic allows for any intermediate
offsets during speculative execution, which could then be used to
extract any restricted stack content via side-channel.
Given for unprivileged stack pointer arithmetic the use of unknown
but bounded scalars is generally forbidden, we can simply turn the
register-based arithmetic operation into an immediate-based arithmetic
operation without the need for masking. This also gives the benefit
of reducing the needed instructions for the operation. Given after
the work in 7fedb63a8307 ("bpf: Tighten speculative pointer arithmetic
mask"), the aux->alu_limit already holds the final immediate value for
the offset register with the known scalar. Thus, a simple mov of the
immediate to AX register with using AX as the source for the original
instruction is sufficient and possible now in this case.
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fedb63a8307dda0ec3b8969a3b233a1dd7ea8e0 upstream.
This work tightens the offset mask we use for unprivileged pointer arithmetic
in order to mitigate a corner case reported by Piotr and Benedict where in
the speculative domain it is possible to advance, for example, the map value
pointer by up to value_size-1 out-of-bounds in order to leak kernel memory
via side-channel to user space.
Before this change, the computed ptr_limit for retrieve_ptr_limit() helper
represents largest valid distance when moving pointer to the right or left
which is then fed as aux->alu_limit to generate masking instructions against
the offset register. After the change, the derived aux->alu_limit represents
the largest potential value of the offset register which we mask against which
is just a narrower subset of the former limit.
For minimal complexity, we call sanitize_ptr_alu() from 2 observation points
in adjust_ptr_min_max_vals(), that is, before and after the simulated alu
operation. In the first step, we retieve the alu_state and alu_limit before
the operation as well as we branch-off a verifier path and push it to the
verification stack as we did before which checks the dst_reg under truncation,
in other words, when the speculative domain would attempt to move the pointer
out-of-bounds.
In the second step, we retrieve the new alu_limit and calculate the absolute
distance between both. Moreover, we commit the alu_state and final alu_limit
via update_alu_sanitation_state() to the env's instruction aux data, and bail
out from there if there is a mismatch due to coming from different verification
paths with different states.
Reported-by: Piotr Krysiuk <piotras@gmail.com>
Reported-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Benedict Schlueter <benedict.schlueter@rub.de>
[fllinden@amazon.com: backported to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to 4.19]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f528819334881fd622fdadeddb3f7edaed8b7c9b upstream.
Add a small sanitize_needed() helper function and move sanitize_val_alu()
out of the main opcode switch. In upcoming work, we'll move sanitize_ptr_alu()
as well out of its opcode switch so this helps to streamline both.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[fllinden@amazon.com: backported to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 073815b756c51ba9d8384d924c5d1c03ca3d1ae4 upstream.
Move the bounds check in adjust_ptr_min_max_vals() into a small helper named
sanitize_check_bounds() in order to simplify the former a bit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[fllinden@amazon.com: backport to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6aaece00a57fa6f22575364b3903dfbccf5345d upstream
Consolidate all error handling and provide more user-friendly error messages
from sanitize_ptr_alu() and sanitize_val_alu().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[fllinden@amazon.com: backport to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b658bbb844e28f1862867f37e8ca11a8e2aa94a3 upstream.
Small refactor with no semantic changes in order to consolidate the max
ptr_limit boundary check.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to 4.19]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24c109bb1537c12c02aeed2d51a347b4d6a9b76e upstream.
The mixed signed bounds check really belongs into retrieve_ptr_limit()
instead of outside of it in adjust_ptr_min_max_vals(). The reason is
that this check is not tied to PTR_TO_MAP_VALUE only, but to all pointer
types that we handle in retrieve_ptr_limit() and given errors from the latter
propagate back to adjust_ptr_min_max_vals() and lead to rejection of the
program, it's a better place to reside to avoid anything slipping through
for future types. The reason why we must reject such off_reg is that we
otherwise would not be able to derive a mask, see details in 9d7eceede769
("bpf: restrict unknown scalars of mixed signed bounds for unprivileged").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
[fllinden@amazon.com: backport to 5.4]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[OP: backport to 4.19]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f55b2f2a1178856c19bbce2f71449926e731914 upstream.
Small refactor to drag off_reg into sanitize_ptr_alu(), so we later on can
use off_reg for generalizing some of the checks for all pointer types.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb8d251ee2a6bf4d7f4af5548e9c8f4fb5f90402 upstream
This patch extends is_branch_taken() logic from JMP+K instructions
to JMP+X instructions.
Conditional branches are often done when src and dst registers
contain known scalars. In such case the verifier can follow
the branch that is going to be taken when program executes.
That speeds up the verification and is essential feature to support
bounded loops.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
[OP: drop is_jmp32 parameter from is_branch_taken() calls and
adjust context]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3a010c493271f04578b133de977e0e5dd2848cea ]
When a interruptible mutex locker is interrupted by a signal
without acquiring this lock and removed from the wait queue.
if the mutex isn't contended enough to have a waiter
put into the wait queue again, the setting of the WAITER
bit will force mutex locker to go into the slowpath to
acquire the lock every time, so if the wait queue is empty,
the WAITER bit need to be clear.
Fixes: 040a0a371005 ("mutex: Add support for wound/wait style locks")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210517034005.30828-1-qiang.zhang@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbb5afad100a828c97e012c6106566d99f041db6 ]
Suppose we have 2 threads, the group-leader L and a sub-theread T,
both parked in ptrace_stop(). Debugger tries to resume both threads
and does
ptrace(PTRACE_CONT, T);
ptrace(PTRACE_CONT, L);
If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not
resume the old leader L, it resumes the post-exec thread T which was
actually now stopped in PTHREAD_EVENT_EXEC. In this case the
PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the
tracee changed its pid.
This patch makes ptrace() fail in this case until debugger does wait()
and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all
ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.
The patch doesn't add the new PTRACE_ option to not complicate the API,
and I _hope_ this won't cause any noticeable regression:
- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec
and the tracer does a ptrace request without having consumed
the exec event, it's 100% sure that the thread the ptracer
thinks it is targeting does not exist anymore, or isn't the
same as the one it thinks it is targeting.
- To some degree this patch adds nothing new. In the scenario
above ptrace(L) can fail with -ESRCH if it is called after the
execing sub-thread wakes the leader up and before it "steals"
the leader's pid.
Test-case:
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <errno.h>
#include <pthread.h>
#include <assert.h>
void *tf(void *arg)
{
execve("/usr/bin/true", NULL, NULL);
assert(0);
return NULL;
}
int main(void)
{
int leader = fork();
if (!leader) {
kill(getpid(), SIGSTOP);
pthread_t th;
pthread_create(&th, NULL, tf, NULL);
for (;;)
pause();
return 0;
}
waitpid(leader, NULL, WSTOPPED);
ptrace(PTRACE_SEIZE, leader, 0,
PTRACE_O_TRACECLONE | PTRACE_O_TRACEEXEC);
waitpid(leader, NULL, 0);
ptrace(PTRACE_CONT, leader, 0,0);
waitpid(leader, NULL, 0);
int status, thread = waitpid(-1, &status, 0);
assert(thread > 0 && thread != leader);
assert(status == 0x80137f);
ptrace(PTRACE_CONT, thread, 0,0);
/*
* waitid() because waitpid(leader, &status, WNOWAIT) does not
* report status. Why ????
*
* Why WEXITED? because we have another kernel problem connected
* to mt-exec.
*/
siginfo_t info;
assert(waitid(P_PID, leader, &info, WSTOPPED|WEXITED|WNOWAIT) == 0);
assert(info.si_pid == leader && info.si_status == 0x0405);
/* OK, it sleeps in ptrace(PTRACE_EVENT_EXEC == 0x04) */
assert(ptrace(PTRACE_CONT, leader, 0,0) == -1);
assert(errno == ESRCH);
assert(leader == waitpid(leader, &status, WNOHANG));
assert(status == 0x04057f);
assert(ptrace(PTRACE_CONT, leader, 0,0) == 0);
return 0;
}
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Simon Marchi <simon.marchi@efficios.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pedro Alves <palves@redhat.com>
Acked-by: Simon Marchi <simon.marchi@efficios.com>
Acked-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31d82c2c787d5cf65fedd35ebbc0c1bd95c1a679 ]
When vzalloc() returns NULL to sha_regions, no error return code of
kexec_calculate_store_digests() is assigned. To fix this bug, ret is
assigned with -ENOMEM in this case.
Link: https://lkml.kernel.org/r/20210309083904.24321-1-baijiaju1990@gmail.com
Fixes: a43cac0d9dc2 ("kexec: split kexec_file syscall code to kexec_file.c")
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0258bdfaff5bd13c4d2383150b7097aecd6b6d82 ]
This fixes an issue where old load on a cfs_rq is not properly decayed,
resulting in strange behavior where fairness can decrease drastically.
Real workloads with equally weighted control groups have ended up
getting a respective 99% and 1%(!!) of cpu time.
When an idle task is attached to a cfs_rq by attaching a pid to a cgroup,
the old load of the task is attached to the new cfs_rq and sched_entity by
attach_entity_cfs_rq. If the task is then moved to another cpu (and
therefore cfs_rq) before being enqueued/woken up, the load will be moved
to cfs_rq->removed from the sched_entity. Such a move will happen when
enforcing a cpuset on the task (eg. via a cgroup) that force it to move.
The load will however not be removed from the task_group itself, making
it look like there is a constant load on that cfs_rq. This causes the
vruntime of tasks on other sibling cfs_rq's to increase faster than they
are supposed to; causing severe fairness issues. If no other task is
started on the given cfs_rq, and due to the cpuset it would not happen,
this load would never be properly unloaded. With this patch the load
will be properly removed inside update_blocked_averages. This also
applies to tasks moved to the fair scheduling class and moved to another
cpu, and this path will also fix that. For fork, the entity is queued
right away, so this problem does not affect that.
This applies to cases where the new process is the first in the cfs_rq,
issue introduced 3d30544f0212 ("sched/fair: Apply more PELT fixes"), and
when there has previously been load on the cgroup but the cgroup was
removed from the leaflist due to having null PELT load, indroduced
in 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing
path").
For a simple cgroup hierarchy (as seen below) with two equally weighted
groups, that in theory should get 50/50 of cpu time each, it often leads
to a load of 60/40 or 70/30.
parent/
cg-1/
cpu.weight: 100
cpuset.cpus: 1
cg-2/
cpu.weight: 100
cpuset.cpus: 1
If the hierarchy is deeper (as seen below), while keeping cg-1 and cg-2
equally weighted, they should still get a 50/50 balance of cpu time.
This however sometimes results in a balance of 10/90 or 1/99(!!) between
the task groups.
$ ps u -C stress
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 18568 1.1 0.0 3684 100 pts/12 R+ 13:36 0:00 stress --cpu 1
root 18580 99.3 0.0 3684 100 pts/12 R+ 13:36 0:09 stress --cpu 1
parent/
cg-1/
cpu.weight: 100
sub-group/
cpu.weight: 1
cpuset.cpus: 1
cg-2/
cpu.weight: 100
sub-group/
cpu.weight: 10000
cpuset.cpus: 1
This can be reproduced by attaching an idle process to a cgroup and
moving it to a given cpuset before it wakes up. The issue is evident in
many (if not most) container runtimes, and has been reproduced
with both crun and runc (and therefore docker and all its "derivatives"),
and with both cgroup v1 and v2.
Fixes: 3d30544f0212 ("sched/fair: Apply more PELT fixes")
Fixes: 039ae8bcf7a5 ("sched/fair: Fix O(nr_cgroups) in the load balancing path")
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210501141950.23622-2-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1139aeb1c521eb4a050920ce6c64c36c4f2a3ab7 upstream.
As of commit 966a967116e6 ("smp: Avoid using two cache lines for struct
call_single_data"), the smp code prefers 32-byte aligned call_single_data
objects for performance reasons, but the block layer includes an instance
of this structure in the main 'struct request' that is more senstive
to size than to performance here, see 4ccafe032005 ("block: unalign
call_single_data in struct request").
The result is a violation of the calling conventions that clang correctly
points out:
block/blk-mq.c:630:39: warning: passing 8-byte aligned argument to 32-byte aligned parameter 2 of 'smp_call_function_single_async' may result in an unaligned pointer access [-Walign-mismatch]
smp_call_function_single_async(cpu, &rq->csd);
It does seem that the usage of the call_single_data without cache line
alignment should still be allowed by the smp code, so just change the
function prototype so it accepts both, but leave the default alignment
unchanged for the other users. This seems better to me than adding
a local hack to shut up an otherwise correct warning in the caller.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Link: https://lkml.kernel.org/r/20210505211300.3174456-1-arnd@kernel.org
[nc: Fix conflicts]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad789f84c9a145f8a18744c0387cec22ec51651e ]
The handling of sysrq key can be activated by echoing the key to
/proc/sysrq-trigger or via the magic key sequence typed into a terminal
that is connected to the system in some way (serial, USB or other mean).
In the former case, the handling is done in a user context. In the
latter case, it is likely to be in an interrupt context.
Currently in print_cpu() of kernel/sched/debug.c, sched_debug_lock is
taken with interrupt disabled for the whole duration of the calls to
print_*_stats() and print_rq() which could last for the quite some time
if the information dump happens on the serial console.
If the system has many cpus and the sched_debug_lock is somehow busy
(e.g. parallel sysrq-t), the system may hit a hard lockup panic
depending on the actually serial console implementation of the
system.
The purpose of sched_debug_lock is to serialize the use of the global
cgroup_path[] buffer in print_cpu(). The rests of the printk calls don't
need serialization from sched_debug_lock.
Calling printk() with interrupt disabled can still be problematic if
multiple instances are running. Allocating a stack buffer of PATH_MAX
bytes is not feasible because of the limited size of the kernel stack.
The solution implemented in this patch is to allow only one caller at a
time to use the full size group_path[], while other simultaneous callers
will have to use shorter stack buffers with the possibility of path
name truncation. A "..." suffix will be printed if truncation may have
happened. The cgroup path name is provided for informational purpose
only, so occasional path name truncation should not be a big problem.
Fixes: efe25c2c7b3a ("sched: Reinstate group names in /proc/sched_debug")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210415195426.6677-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 262e6ae7081df304fc625cf368d5c2cbba2bb991 upstream.
If a TAINT_PROPRIETARY_MODULE exports symbol, inherit the taint flag
for all modules importing these symbols, and don't allow loading
symbols from TAINT_PROPRIETARY_MODULE modules if the module previously
imported gplonly symbols. Add a anti-circumvention devices so people
don't accidentally get themselves into trouble this way.
Comment from Greg:
"Ah, the proven-to-be-illegal "GPL Condom" defense :)"
[jeyu: pr_info -> pr_err and pr_warn as per discussion]
Link: http://lore.kernel.org/r/20200730162957.GA22469@lst.de
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef1dac6021cc8ec5de02ce31722bf26ac4ed5523 upstream.
Report the GPLONLY status through a new argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd8732cdcc37d7077c4fa2c966b748c0662b607e upstream.
Use the same spelling variant as the rest of the file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34e64705ad415ed7a816e60ef62b42fe6d1729d9 upstream.
__module_address is only used by built-in code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fe1e56d0e68b623dd62d8d38265d2a052e7e185 upstream.
__module_text_address is only used by built-in code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a54e04914c211b5678602a46b3ede5d82ec1327d upstream.
each_symbol_section is only used inside of module.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 773110470e2fa3839523384ae014f8a723c4d178 upstream.
find_symbol is only used in module.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aafe104aa9096827a429bc1358f8260ee565b7cc upstream.
It was reported that a fix to the ring buffer recursion detection would
cause a hung machine when performing suspend / resume testing. The
following backtrace was extracted from debugging that case:
Call Trace:
trace_clock_global+0x91/0xa0
__rb_reserve_next+0x237/0x460
ring_buffer_lock_reserve+0x12a/0x3f0
trace_buffer_lock_reserve+0x10/0x50
__trace_graph_return+0x1f/0x80
trace_graph_return+0xb7/0xf0
? trace_clock_global+0x91/0xa0
ftrace_return_to_handler+0x8b/0xf0
? pv_hash+0xa0/0xa0
return_to_handler+0x15/0x30
? ftrace_graph_caller+0xa0/0xa0
? trace_clock_global+0x91/0xa0
? __rb_reserve_next+0x237/0x460
? ring_buffer_lock_reserve+0x12a/0x3f0
? trace_event_buffer_lock_reserve+0x3c/0x120
? trace_event_buffer_reserve+0x6b/0xc0
? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0
? dpm_run_callback+0x3b/0xc0
? pm_ops_is_empty+0x50/0x50
? platform_get_irq_byname_optional+0x90/0x90
? trace_device_pm_callback_start+0x82/0xd0
? dpm_run_callback+0x49/0xc0
With the following RIP:
RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200
Since the fix to the recursion detection would allow a single recursion to
happen while tracing, this lead to the trace_clock_global() taking a spin
lock and then trying to take it again:
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* lock taken */
(something else gets traced by function graph tracer)
ring_buffer_lock_reserve() {
trace_clock_global() {
arch_spin_lock() {
queued_spin_lock_slowpath() {
/* DEAD LOCK! */
Tracing should *never* block, as it can lead to strange lockups like the
above.
Restructure the trace_clock_global() code to instead of simply taking a
lock to update the recorded "prev_time" simply use it, as two events
happening on two different CPUs that calls this at the same time, really
doesn't matter which one goes first. Use a trylock to grab the lock for
updating the prev_time, and if it fails, simply try again the next time.
If it failed to be taken, that means something else is already updating
it.
Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home
Cc: stable@vger.kernel.org
Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Fixes: b02414c8f045 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem
Fixes: 14131f2f98ac3 ("tracing: implement trace_clock_*() APIs") # where the bug happened
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 785e3c0a3a870e72dc530856136ab4c8dd207128 upstream.
The default max PID is set by PID_MAX_DEFAULT, and the tracing
infrastructure uses this number to map PIDs to the comm names of the
tasks, such output of the trace can show names from the recorded PIDs in
the ring buffer. This mapping is also exported to user space via the
"saved_cmdlines" file in the tracefs directory.
But currently the mapping expects the PIDs to be less than
PID_MAX_DEFAULT, which is the default maximum and not the real maximum.
Recently, systemd will increases the maximum value of a PID on the system,
and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its
comm is not recorded. This leads to the entire trace to have "<...>" as
the comm name, which is pretty useless.
Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead
of just mapping the index to the comm, map a mask of the PID
(PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the
map_cmdline_to_pid array (that already exists).
This bug goes back to the beginning of ftrace, but hasn't been an issue
until user space started increasing the maximum value of PIDs.
Link: https://lkml.kernel.org/r/20210427113207.3c601884@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d036dfa5f10df9782f5278fc591d79d283c1fad upstream.
The return value on success (>= 0) is overwritten by the return value of
put_old_timex32(). That works correct in the fault case, but is wrong for
the success case where put_old_timex32() returns 0.
Just check the return value of put_old_timex32() and return -EFAULT in case
it is not zero.
[ tglx: Massage changelog ]
Fixes: 3a4d44b61625 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Cochran <richardcochran@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210414030449.90692-1-chenjun102@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fbf5d6837bf81fd7a27d771358f4ee6c4f243f8 upstream.
The FUTEX_WAIT operand has historically a relative timeout which means that
the clock id is irrelevant as relative timeouts on CLOCK_REALTIME are not
subject to wall clock changes and therefore are mapped by the kernel to
CLOCK_MONOTONIC for simplicity.
If a caller would set FUTEX_CLOCK_REALTIME for FUTEX_WAIT the timeout is
still treated relative vs. CLOCK_MONOTONIC and then the wait arms that
timeout based on CLOCK_REALTIME which is broken and obviously has never
been used or even tested.
Reject any attempt to use FUTEX_CLOCK_REALTIME with FUTEX_WAIT again.
The desired functionality can be achieved with FUTEX_WAIT_BITSET and a
FUTEX_BITSET_MATCH_ANY argument.
Fixes: 337f13046ff0 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210422194704.834797921@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c93a5e20c3c2dabef8ea360a3d3f18c6f68233ab ]
When irq_matrix_free() is called for an unallocated vector the
managed_allocated and total_allocated counters get out of sync with the
real state of the matrix. Later, when the last interrupt is freed, these
counters will underflow resulting in UINTMAX because the counters are
unsigned.
While this is certainly a problem of the calling code, this can be catched
in the allocator by checking the allocation bit for the to be freed vector
which simplifies debugging.
An example of the problem described above:
https://lore.kernel.org/lkml/20210318192819.636943062@linutronix.de/
Add the missing sanity check and emit a warning when it triggers.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210319111823.1105248-1-vkuznets@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8c9af478c06bb1ab1422f90d8ecbc53defd44bc3 upstream.
# echo switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter
will cause switch_mm to stop tracing by the traceoff command.
# echo -n switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter
does nothing.
The reason is that the parsing in the write function only processes
commands if it finished parsing (there is white space written after the
command). That's to handle:
write(fd, "switch_mm:", 10);
write(fd, "traceoff", 8);
cases, where the command is broken over multiple writes.
The problem is if the file descriptor is closed, then the write call is
not processed, and the command needs to be processed in the release code.
The release code can handle matching of functions, but does not handle
commands.
Cc: stable@vger.kernel.org
Fixes: eda1e32855656 ("tracing: handle broken names in ftrace filter")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9b34ddbe2076ade359cd5ce7537d5ed019e9807 upstream.
The negation logic for the case where the off_reg is sitting in the
dst register is not correct given then we cannot just invert the add
to a sub or vice versa. As a fix, perform the final bitwise and-op
unconditionally into AX from the off_reg, then move the pointer from
the src to dst and finally use AX as the source for the original
pointer arithmetic operation such that the inversion yields a correct
result. The single non-AX mov in between is possible given constant
blinding is retaining it as it's not an immediate based operation.
Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: Piotr Krysiuk <piotras@gmail.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 84a24bf8c52e66b7ac89ada5e3cfbe72d65c1896 ]
While this code is executed with the wait_lock held, a reader can
acquire the lock without holding wait_lock. The writer side loops
checking the value with the atomic_cond_read_acquire(), but only truly
acquires the lock when the compare-and-exchange is completed
successfully which isn’t ordered. This exposes the window between the
acquire and the cmpxchg to an A-B-A problem which allows reads
following the lock acquisition to observe values speculatively before
the write lock is truly acquired.
We've seen a problem in epoll where the reader does a xchg while
holding the read lock, but the writer can see a value change out from
under it.
Writer | Reader
--------------------------------------------------------------------------------
ep_scan_ready_list() |
|- write_lock_irq() |
|- queued_write_lock_slowpath() |
|- atomic_cond_read_acquire() |
| read_lock_irqsave(&ep->lock, flags);
--> (observes value before unlock) | chain_epi_lockless()
| | epi->next = xchg(&ep->ovflist, epi);
| | read_unlock_irqrestore(&ep->lock, flags);
| |
| atomic_cmpxchg_relaxed() |
|-- READ_ONCE(ep->ovflist); |
A core can order the read of the ovflist ahead of the
atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire
semantics addresses this issue at which point the atomic_cond_read can
be switched to use relaxed semantics.
Fixes: b519b56e378ee ("locking/qrwlock: Use atomic_cond_read_acquire() when spinning in qrwlock")
Signed-off-by: Ali Saidi <alisaidi@amazon.com>
[peterz: use try_cmpxchg()]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a85969e9d912d5dd85362ee37b5f81266e00e77 ]
Since this message is printed when dynamically allocated spinlocks (e.g.
kzalloc()) are used without initialization (e.g. spin_lock_init()),
suggest to developers to check whether initialization functions for objects
were called, before making developers wonder what annotation is missing.
[ mingo: Minor tweaks to the message. ]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210321064913.4619-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0687c66b5f666b5ad433f4e94251590d9bc9d10e ]
The debug_work_activate() is called on the premise that
the work can be inserted, because if wq be in WQ_DRAINING
status, insert work may be failed.
Fixes: e41e704bc4f4 ("workqueue: improve destroy_workqueue() debuggability")
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9deb193af69d3fd6dd8e47f292b67c805a787010 upstream.
Commit cbc3b92ce037 fixed an issue to modify the macros of the stack trace
event so that user space could parse it properly. Originally the stack
trace format to user space showed that the called stack was a dynamic
array. But it is not actually a dynamic array, in the way that other
dynamic event arrays worked, and this broke user space parsing for it. The
update was to make the array look to have 8 entries in it. Helper
functions were added to make it parse it correctly, as the stack was
dynamic, but was determined by the size of the event stored.
Although this fixed user space on how it read the event, it changed the
internal structure used for the stack trace event. It changed the array
size from [0] to [8] (added 8 entries). This increased the size of the
stack trace event by 8 words. The size reserved on the ring buffer was the
size of the stack trace event plus the number of stack entries found in
the stack trace. That commit caused the amount to be 8 more than what was
needed because it did not expect the caller field to have any size. This
produced 8 entries of garbage (and reading random data) from the stack
trace event:
<idle>-0 [002] d... 1976396.837549: <stack trace>
=> trace_event_raw_event_sched_switch
=> __traceiter_sched_switch
=> __schedule
=> schedule_idle
=> do_idle
=> cpu_startup_entry
=> secondary_startup_64_no_verify
=> 0xc8c5e150ffff93de
=> 0xffff93de
=> 0
=> 0
=> 0xc8c5e17800000000
=> 0x1f30affff93de
=> 0x00000004
=> 0x200000000
Instead, subtract the size of the caller field from the size of the event
to make sure that only the amount needed to store the stack trace is
reserved.
Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/
Cc: stable@vger.kernel.org
Fixes: cbc3b92ce037 ("tracing: Set kernel_stack's caller size properly")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5de2055d31ea88fd9ae9709ac95c372a505a60fa ]
The use_ww_ctx flag is passed to mutex_optimistic_spin(), but the
function doesn't use it. The frequent use of the (use_ww_ctx && ww_ctx)
combination is repetitive.
In fact, ww_ctx should not be used at all if !use_ww_ctx. Simplify
ww_mutex code by dropping use_ww_ctx from mutex_optimistic_spin() an
clear ww_ctx if !use_ww_ctx. In this way, we can replace (use_ww_ctx &&
ww_ctx) by just (ww_ctx).
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20210316153119.13802-2-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 81e2073c175b887398e5bca6c004efa89983f58d upstream.
With interrupt force threading all device interrupt handlers are invoked
from kernel threads. Contrary to hard interrupt context the invocation only
disables bottom halfs, but not interrupts. This was an oversight back then
because any code like this will have an issue:
thread(irq_A)
irq_handler(A)
spin_lock(&foo->lock);
interrupt(irq_B)
irq_handler(B)
spin_lock(&foo->lock);
This has been triggered with networking (NAPI vs. hrtimers) and console
drivers where printk() happens from an interrupt which interrupted the
force threaded handler.
Now people noticed and started to change the spin_lock() in the handler to
spin_lock_irqsave() which affects performance or add IRQF_NOTHREAD to the
interrupt request which in turn breaks RT.
Fix the root cause and not the symptom and disable interrupts before
invoking the force threaded handler which preserves the regular semantics
and the usefulness of the interrupt force threading as a general debugging
tool.
For not RT this is not changing much, except that during the execution of
the threaded handler interrupts are delayed until the handler
returns. Vs. scheduling and softirq processing there is no difference.
For RT kernels there is no issue.
Fixes: 8d32a307e4fa ("genirq: Provide forced interrupt threading")
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210317143859.513307808@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5abbe51a526253b9f003e9a0a195638dc882d660 upstream.
Preparation for fixing get_nr_restart_syscall() on X86 for COMPAT.
Add a new helper which sets restart_block->fn and calls a dummy
arch_set_restart_data() helper.
Fixes: 609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174641.GA17871@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b1597e64e1a610c7a96710fc4717158e98a08b3 upstream.
Given we know the max possible value of ptr_limit at the time of retrieving
the latter, add basic assertions, so that the verifier can bail out if
anything looks odd and reject the program. Nothing triggered this so far,
but it also does not hurt to have these.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5871dca250cd391885218b99cc015aca1a51aea upstream.
Instead of having the mov32 with aux->alu_limit - 1 immediate, move this
operation to retrieve_ptr_limit() instead to simplify the logic and to
allow for subsequent sanity boundary checks inside retrieve_ptr_limit().
This avoids in future that at the time of the verifier masking rewrite
we'd run into an underflow which would not sign extend due to the nature
of mov32 instruction.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10d2bb2e6b1d8c4576c56a748f697dbeb8388899 upstream.
retrieve_ptr_limit() computes the ptr_limit for registers with stack and
map_value type. ptr_limit is the size of the memory area that is still
valid / in-bounds from the point of the current position and direction
of the operation (add / sub). This size will later be used for masking
the operation such that attempting out-of-bounds access in the speculative
domain is redirected to remain within the bounds of the current map value.
When masking to the right the size is correct, however, when masking to
the left, the size is off-by-one which would lead to an incorrect mask
and thus incorrect arithmetic operation in the non-speculative domain.
Piotr found that if the resulting alu_limit value is zero, then the
BPF_MOV32_IMM() from the fixup_bpf_calls() rewrite will end up loading
0xffffffff into AX instead of sign-extending to the full 64 bit range,
and as a result, this allows abuse for executing speculatively out-of-
bounds loads against 4GB window of address space and thus extracting the
contents of kernel memory via side-channel.
Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f232326f6966cf2a1d1db7bc917a4ce5f9f55f76 upstream.
The purpose of this patch is to streamline error propagation and in particular
to propagate retrieve_ptr_limit() errors for pointer types that are not defining
a ptr_limit such that register-based alu ops against these types can be rejected.
The main rationale is that a gap has been identified by Piotr in the existing
protection against speculatively out-of-bounds loads, for example, in case of
ctx pointers, unprivileged programs can still perform pointer arithmetic. This
can be abused to execute speculatively out-of-bounds loads without restrictions
and thus extract contents of kernel memory.
Fix this by rejecting unprivileged programs that attempt any pointer arithmetic
on unprotected pointer types. The two affected ones are pointer to ctx as well
as pointer to map. Field access to a modified ctx' pointer is rejected at a
later point in time in the verifier, and 7c6967326267 ("bpf: Permit map_ptr
arithmetic with opcode add and offset 0") only relevant for root-only use cases.
Risk of unprivileged program breakage is considered very low.
Fixes: 7c6967326267 ("bpf: Permit map_ptr arithmetic with opcode add and offset 0")
Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation")
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 46eb1701c046cc18c032fa68f3c8ccbf24483ee4 ]
hrtimer_force_reprogram() and hrtimer_interrupt() invokes
__hrtimer_get_next_event() to find the earliest expiry time of hrtimer
bases. __hrtimer_get_next_event() does not update
cpu_base::[softirq_]_expires_next to preserve reprogramming logic. That
needs to be done at the callsites.
hrtimer_force_reprogram() updates cpu_base::softirq_expires_next only when
the first expiring timer is a softirq timer and the soft interrupt is not
activated. That's wrong because cpu_base::softirq_expires_next is left
stale when the first expiring timer of all bases is a timer which expires
in hard interrupt context. hrtimer_interrupt() does never update
cpu_base::softirq_expires_next which is wrong too.
That becomes a problem when clock_settime() sets CLOCK_REALTIME forward and
the first soft expiring timer is in the CLOCK_REALTIME_SOFT base. Setting
CLOCK_REALTIME forward moves the clock MONOTONIC based expiry time of that
timer before the stale cpu_base::softirq_expires_next.
cpu_base::softirq_expires_next is cached to make the check for raising the
soft interrupt fast. In the above case the soft interrupt won't be raised
until clock monotonic reaches the stale cpu_base::softirq_expires_next
value. That's incorrect, but what's worse it that if the softirq timer
becomes the first expiring timer of all clock bases after the hard expiry
timer has been handled the reprogramming of the clockevent from
hrtimer_interrupt() will result in an interrupt storm. That happens because
the reprogramming does not use cpu_base::softirq_expires_next, it uses
__hrtimer_get_next_event() which returns the actual expiry time. Once clock
MONOTONIC reaches cpu_base::softirq_expires_next the soft interrupt is
raised and the storm subsides.
Change the logic in hrtimer_force_reprogram() to evaluate the soft and hard
bases seperately, update softirq_expires_next and handle the case when a
soft expiring timer is the first of all bases by comparing the expiry times
and updating the required cpu base fields. Split this functionality into a
separate function to be able to use it in hrtimer_interrupt() as well
without copy paste.
Fixes: 5da70160462e ("hrtimer: Implement support for softirq based hrtimers")
Reported-by: Mikael Beckius <mikael.beckius@windriver.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mikael Beckius <mikael.beckius@windriver.com>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210223160240.27518-1-anna-maria@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8a8109f303e25a27f92c1d8edd67d7cbbc60a4eb upstream.
printk_safe_flush_on_panic() caused the following deadlock on our
server:
CPU0: CPU1:
panic rcu_dump_cpu_stacks
kdump_nmi_shootdown_cpus nmi_trigger_cpumask_backtrace
register_nmi_handler(crash_nmi_callback) printk_safe_flush
__printk_safe_flush
raw_spin_lock_irqsave(&read_lock)
// send NMI to other processors
apic_send_IPI_allbutself(NMI_VECTOR)
// NMI interrupt, dead loop
crash_nmi_callback
printk_safe_flush_on_panic
printk_safe_flush
__printk_safe_flush
// deadlock
raw_spin_lock_irqsave(&read_lock)
DEADLOCK: read_lock is taken on CPU1 and will never get released.
It happens when panic() stops a CPU by NMI while it has been in
the middle of printk_safe_flush().
Handle the lock the same way as logbuf_lock. The printk_safe buffers
are flushed only when both locks can be safely taken. It can avoid
the deadlock _in this particular case_ at expense of losing contents
of printk_safe buffers.
Note: It would actually be safe to re-init the locks when all CPUs were
stopped by NMI. But it would require passing this information
from arch-specific code. It is not worth the complexity.
Especially because logbuf_lock and printk_safe buffers have been
obsoleted by the lockless ring buffer.
Fixes: cf9b1106c81c ("printk/nmi: flush NMI messages on the system panic")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: <stable@vger.kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210210034823.64867-1-songmuchun@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebfac7b778fac8b0e8e92ec91d0b055f046b4604 upstream.
clang-12 -fno-pic (since
a084c0388e)
can emit `call __stack_chk_fail@PLT` instead of `call __stack_chk_fail`
on x86. The two forms should have identical behaviors on x86-64 but the
former causes GNU as<2.37 to produce an unreferenced undefined symbol
_GLOBAL_OFFSET_TABLE_.
(On x86-32, there is an R_386_PC32 vs R_386_PLT32 difference but the
linker behavior is identical as far as Linux kernel is concerned.)
Simply ignore _GLOBAL_OFFSET_TABLE_ for now, like what
scripts/mod/modpost.c:ignore_undef_symbol does. This also fixes the
problem for gcc/clang -fpie and -fpic, which may emit `call foo@PLT` for
external function calls on x86.
Note: ld -z defs and dynamic loaders do not error for unreferenced
undefined symbols so the module loader is reading too much. If we ever
need to ignore more symbols, the code should be refactored to ignore
unreferenced symbols.
Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1250
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27178
Reported-by: Marco Elver <elver@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04b38d012556199ba4c31195940160e0c44c64f0 upstream.
We don't actually care about the value, since the kernel will panic
before that; but a value should nonetheless be returned, otherwise the
compiler will complain.
Fixes: 8112c4f140fa ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210111172839.640914-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit befe6d946551d65cddbd32b9cb0170b0249fd5ed ]
The list of tracepoint callbacks is managed by an array that is protected
by RCU. To update this array, a new array is allocated, the updates are
copied over to the new array, and then the list of functions for the
tracepoint is switched over to the new array. After a completion of an RCU
grace period, the old array is freed.
This process happens for both adding a callback as well as removing one.
But on removing a callback, if the new array fails to be allocated, the
callback is not removed, and may be used after it is freed by the clients
of the tracepoint.
There's really no reason to fail if the allocation for a new array fails
when removing a function. Instead, the function can simply be replaced by a
stub function that could be cleaned up on the next modification of the
array. That is, instead of calling the function registered to the
tracepoint, it would call a stub function in its place.
Link: https://lore.kernel.org/r/20201115055256.65625-1-mmullins@mmlx.us
Link: https://lore.kernel.org/r/20201116175107.02db396d@gandalf.local.home
Link: https://lore.kernel.org/r/20201117211836.54acaef2@oasis.local.home
Link: https://lkml.kernel.org/r/20201118093405.7a6d2290@gandalf.local.home
[ Note, this version does use undefined compiler behavior (assuming that
a stub function with no parameters or return, can be called by a location
that thinks it has parameters but still no return value. Static calls
do the same thing, so this trick is not without precedent.
There's another solution that uses RCU tricks and is more complex, but
can be an alternative if this solution becomes an issue.
Link: https://lore.kernel.org/lkml/20210127170721.58bce7cc@gandalf.local.home/
]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: netdev <netdev@vger.kernel.org>
Cc: bpf <bpf@vger.kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Florian Weimer <fw@deneb.enyo.de>
Fixes: 97e1c18e8d17b ("tracing: Kernel Tracepoints")
Reported-by: syzbot+83aa762ef23b6f0d1991@syzkaller.appspotmail.com
Reported-by: syzbot+d29e58bb557324e55e5e@syzkaller.appspotmail.com
Reported-by: Matt Mullins <mmullins@mmlx.us>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Matt Mullins <mmullins@mmlx.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f31e3386a4e92ba6eda7328cb508462956c94c64 ]
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function. This buffer is not freed before
completing the kexec system call resulting in memory leak.
Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29e7 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
