IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 6d50eb4725934fd22f5eeccb401000687c790fd0 ]
It was reported that dm-integrity runs out of vmalloc space on 32-bit
architectures. On x86, there is only 128MiB vmalloc space and dm-integrity
consumes it quickly because it has a 64MiB journal and 8MiB recalculate
buffer.
Fix this by reducing the size of the journal to 4MiB and the size of
the recalculate buffer to 1MiB, so that multiple dm-integrity devices
can be created and activated on 32-bit architectures.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1e4ab7b4c881cf26c1c72b3f56519e03475486fb upstream.
When using the cleaner policy to decommission the cache, there is
never any writeback started from the cache as it is constantly delayed
due to normal I/O keeping the device busy. Meaning @idle=false was
always being passed to clean_target_met()
Fix this by adding a specific 'cleaner' flag that is set when the
cleaner policy is configured. This flag serves to always allow the
cleaner's writeback work to be queued until the cache is
decommissioned (even if the cache isn't idle).
Reported-by: David Jeffery <djeffery@redhat.com>
Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bae3028799dc4f1109acc4df37c8ff06f2d8f1a0 ]
In the error paths 'bad_stripe_cache' and 'bad_check_reshape',
'reconfig_mutex' is still held after raid_ctr() returns.
Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80fca8a10b604afad6c14213fdfd816c4eda3ee4 ]
In some specific situations, the return value of __bch_btree_node_alloc
may be NULL. This may lead to a potential NULL pointer dereference in
caller function like a calling chain :
btree_split->bch_btree_node_alloc->__bch_btree_node_alloc.
Fix it by initializing the return value in __bch_btree_node_alloc.
Fixes: cafe56359144 ("bcache: A block layer cache")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e4aed8309ff28670271546c2c3263eb12f5eb6 ]
The parameter 'int n' from bch_bucket_alloc_set() is not cleared
defined. From the code comments n is the number of buckets to alloc, but
from the code itself 'n' is the maximum cache to iterate. Indeed all the
locations where bch_bucket_alloc_set() is called, 'n' is alwasy 1.
This patch removes the confused and unnecessary 'int n' from parameter
list of bch_bucket_alloc_set(), and explicitly allocates only 1 bucket
for its caller.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 80fca8a10b60 ("bcache: Fix __bch_btree_node_alloc to make the failure behavior consistent")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8792099f9ad487cf381f4e8199ff2158ba0f6eb5 ]
Current cache_set has MAX_CACHES_PER_SET caches most, and the macro
is used for
"
struct cache *cache_by_alloc[MAX_CACHES_PER_SET];
"
in the define of struct cache_set.
Use MAX_CACHES_PER_SET instead of magic number 8 in
__bch_bucket_alloc_set.
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 80fca8a10b60 ("bcache: Fix __bch_btree_node_alloc to make the failure behavior consistent")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 010444623e7f4da6b4a4dd603a7da7469981e293 ]
Currently, there is no limit for raid1/raid10 plugged bio. While flushing
writes, raid1 has cond_resched() while raid10 doesn't, and too many
writes can cause soft lockup.
Follow up soft lockup can be triggered easily with writeback test for
raid10 with ramdisks:
watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293]
Call Trace:
<TASK>
call_rcu+0x16/0x20
put_object+0x41/0x80
__delete_object+0x50/0x90
delete_object_full+0x2b/0x40
kmemleak_free+0x46/0xa0
slab_free_freelist_hook.constprop.0+0xed/0x1a0
kmem_cache_free+0xfd/0x300
mempool_free_slab+0x1f/0x30
mempool_free+0x3a/0x100
bio_free+0x59/0x80
bio_put+0xcf/0x2c0
free_r10bio+0xbf/0xf0
raid_end_bio_io+0x78/0xb0
one_write_done+0x8a/0xa0
raid10_end_write_request+0x1b4/0x430
bio_endio+0x175/0x320
brd_submit_bio+0x3b9/0x9b7 [brd]
__submit_bio+0x69/0xe0
submit_bio_noacct_nocheck+0x1e6/0x5a0
submit_bio_noacct+0x38c/0x7e0
flush_pending_writes+0xf0/0x240
raid10d+0xac/0x1ed0
Fix the problem by adding cond_resched() to raid10 like what raid1 did.
Note that unlimited plugged bio still need to be optimized, for example,
in the case of lots of dirty pages writeback, this will take lots of
memory and io will spend a long time in plug, hence io latency is bad.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529131106.2123367-2-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 873f50ece41aad5c4f788a340960c53774b5526e ]
Currently, if reshape is interrupted, echo "reshape" to sync_action will
restart reshape from scratch, for example:
echo frozen > sync_action
echo reshape > sync_action
This will corrupt data before reshape_position if the array is growing,
fix the problem by continue reshape from reshape_position.
Reported-by: Peter Neuwirth <reddunur@online.de>
Link: https://lore.kernel.org/linux-raid/e2f96772-bfbc-f43b-6da1-f520e5164536@online.de/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230512015610.821290-3-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e836007089ba8fdf24e636ef2b007651fb4582e6 upstream.
We've found that using raid0 with the 'original' layout and discard
enabled with different disk sizes (such that at least two zones are
created) can result in data corruption. This is due to the fact that
the discard handling in 'raid0_handle_discard()' assumes the 'alternate'
layout. We've seen this corruption using ext4 but other filesystems are
likely susceptible as well.
More specifically, while multiple zones are necessary to create the
corruption, the corruption may not occur with multiple zones if they
layout in such a way the layout matches what the 'alternate' layout
would have produced. Thus, not all raid0 devices with the 'original'
layout, different size disks and discard enabled will encounter this
corruption.
The 3.14 kernel inadvertently changed the raid0 disk layout for different
size disks. Thus, running a pre-3.14 kernel and post-3.14 kernel on the
same raid0 array could corrupt data. This lead to the creation of the
'original' layout (to match the pre-3.14 layout) and the 'alternate' layout
(to match the post 3.14 layout) in the 5.4 kernel time frame and an option
to tell the kernel which layout to use (since it couldn't be autodetected).
However, when the 'original' layout was added back to 5.4 discard support
for the 'original' layout was not added leading this issue.
I've been able to reliably reproduce the corruption with the following
test case:
1. create raid0 array with different size disks using original layout
2. mkfs
3. mount -o discard
4. create lots of files
5. remove 1/2 the files
6. fstrim -a (or just the mount point for the raid0 array)
7. umount
8. fsck -fn /dev/md0 (spews all sorts of corruptions)
Let's fix this by adding proper discard support to the 'original' layout.
The fix 'maps' the 'original' layout disks to the order in which they are
read/written such that we can compare the disks in the same way that the
current 'alternate' layout does. A 'disk_shift' field is added to
'struct strip_zone'. This could be computed on the fly in
raid0_handle_discard() but by adding this field, we save some computation
in the discard path.
Note we could also potentially fix this by re-ordering the disks in the
zones that follow the first one, and then always read/writing them using
the 'alternate' layout. However, that is seen as a more substantial change,
and we are attempting the least invasive fix at this time to remedy the
corruption.
I've verified the change using the reproducer mentioned above. Typically,
the corruption is seen after less than 3 iterations, while the patch has
run 500+ iterations.
Cc: NeilBrown <neilb@suse.de>
Cc: Song Liu <song@kernel.org>
Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230623180523.1901230-1-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 028ddcac477b691dd9205c92f991cc15259d033e upstream.
Due to the previous fix of __bch_btree_node_alloc, the return value will
never be a NULL pointer. So IS_ERR is enough to handle the failure
situation. Fix it by replacing IS_ERR_OR_NULL check by an IS_ERR check.
Fixes: cafe56359144 ("bcache: A block layer cache")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2ae6aaf76912bae53c74b191569d2ab484f24bf3 ]
When removing a disk with replacement, the replacement will be used to
replace rdev. During this process, there is a brief window in which both
rdev and replacement are read as NULL in raid10_write_request(). This
will result in io not being submitted but it should be.
//remove //write
raid10_remove_disk raid10_write_request
mirror->rdev = NULL
read rdev -> NULL
mirror->rdev = mirror->replacement
mirror->replacement = NULL
read replacement -> NULL
Fix it by reading replacement first and rdev later, meanwhile, use smp_mb()
to prevent memory reordering.
Fixes: 475b0321a4df ("md/raid10: writes should get directed to replacement as well as original.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230602091839.743798-3-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8b20a405428803bd9881881d8242c9d72c6b2b2 ]
There is no input check when echo md/max_read_errors and overflow might
occur. Add check of input number.
Fixes: 1e50915fe0bb ("raid: improve MD/raid10 handling of correctable read errors.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230522072535.1523740-3-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6beb489b2eed25978523f379a605073f99240c50 ]
There is no input check when echo md/safe_mode_delay in safe_delay_store().
And msec might also overflow when HZ < 1000 in safe_delay_show(), Fix it by
checking overflow in safe_delay_store() and use unsigned long conversion in
safe_delay_show().
Fixes: 72e02075a33f ("md: factor out parsing of fixed-point numbers")
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230522072535.1523740-2-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 301867b1c16805aebbc306aafa6ecdc68b73c7e5 ]
If we write a large number to md/bitmap_set_bits, md_bitmap_checkpage()
will return -EINVAL because 'page >= bitmap->pages', but the return value
was not checked immediately in md_bitmap_get_counter() in order to set
*blocks value and slab-out-of-bounds occurs.
Move check of 'page >= bitmap->pages' to md_bitmap_get_counter() and
return directly if true.
Fixes: ef4256733506 ("md/bitmap: optimise scanning of empty bitmaps.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230515134808.3936750-2-linan666@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3f649ab728cda8038259d8f14492fe400fbab911 upstream.
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e8c5d45f82ce0c238a4817739892fe8897a3dcc3 ]
In verity_end_io(), if bi_status is not BLK_STS_OK, it can be return
directly. But if FEC configured, it is desired to correct the data page
through verity_verify_io. And the return value will be converted to
blk_status and passed to verity_finish_io().
BTW, when a bit is set in v->validated_blocks, verity_verify_io() skips
verification regardless of I/O error for the corresponding bio. In this
case, the I/O error could not be returned properly, and as a result,
there is a problem that abnormal data could be read for the
corresponding block.
To fix this problem, when an I/O error occurs, do not skip verification
even if the bit related is set in v->validated_blocks.
Fixes: 843f38d382b1 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c0468e054c0adb660ac055fc396622ec7235df9 ]
Without FEC, dm-verity won't call verity_handle_err() when I/O fails,
but with FEC enabled, it currently does even if an I/O error has
occurred.
If there is an I/O error and FEC correction fails, return the error
instead of calling verity_handle_err() again.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Akilesh Kailash <akailash@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Stable-dep-of: e8c5d45f82ce ("dm verity: fix error handling for check_at_most_once on FEC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3d32aaa7e66d5c1479a3c31d6c2c5d45dd0d3b89 upstream.
syzkaller found the following problematic rwsem locking (with write
lock already held):
down_read+0x9d/0x450 kernel/locking/rwsem.c:1509
dm_get_inactive_table+0x2b/0xc0 drivers/md/dm-ioctl.c:773
__dev_status+0x4fd/0x7c0 drivers/md/dm-ioctl.c:844
table_clear+0x197/0x280 drivers/md/dm-ioctl.c:1537
In table_clear, it first acquires a write lock
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520
down_write(&_hash_lock);
Then before the lock is released at L1539, there is a path shown above:
table_clear -> __dev_status -> dm_get_inactive_table -> down_read
https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773
down_read(&_hash_lock);
It tries to acquire the same read lock again, resulting in the deadlock
problem.
Fix this by moving table_clear()'s __dev_status() call to after its
up_write(&_hash_lock);
Cc: stable@vger.kernel.org
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a405c6f0229526160aa3f177f65e20c86fce84c5 upstream.
init_resync() inits mempool and sets conf->have_replacemnt at the beginning
of sync, close_sync() frees the mempool when sync is completed.
After [1] recovery might be skipped and init_resync() is called but
close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio.
The following is one way to reproduce the issue.
1) create a array, wait for resync to complete, mddev->recovery_cp is set
to MaxSector.
2) recovery is woken and it is skipped. conf->have_replacement is set to
0 in init_resync(). close_sync() not called.
3) some io errors and rdev A is set to WantReplacement.
4) a new device is added and set to A's replacement.
5) recovery is woken, A have replacement, but conf->have_replacemnt is
0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref
occurs.
Fix it by not calling init_resync() if recovery skipped.
[1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Fixes: 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")
Cc: stable@vger.kernel.org
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230222041000.3341651-3-linan666@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f0ddb83da3cbbf8a1f9087a642c448ff52ee9abd ]
In raid10_run(), if setup_conf() succeed and raid10_run() failed before
setting 'mddev->thread', then in the error path 'conf->thread' is not
freed.
Fix the problem by setting 'mddev->thread' right after setup_conf().
Fixes: 43a521238aca ("md-cluster: choose correct label when clustered layout is not supported")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-7-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16ef510139315a2147ee7525796f8dbd4e4b7864 ]
The raid5 and raid10 drivers currently update the read-ahead size,
but not the optimal I/O size on reshape. To prepare for deriving the
read-ahead size from the optimal I/O size make sure it is updated
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: f0ddb83da3cb ("md/raid10: fix memleak of md thread")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9ac2acde53f5385de185bccf6aaa91cf9ac1541 ]
In the error path of raid10_run(), 'conf' need be freed, however,
'conf->bio_split' is missed and memory will be leaked.
Since there are 3 places to free 'conf', factor out a helper to fix the
problem.
Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-6-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26208a7cffd0c7cbf14237ccd20c7270b3ffeb7e ]
raid10_sync_request() will add 'r10bio->remaining' for both rdev and
replacement rdev. However, if the read io fails, recovery_request_write()
returns without issuing the write io, in this case, end_sync_request()
is only called once and 'remaining' is leaked, cause an io hang.
Fix the problem by decreasing 'remaining' according to if 'bio' and
'repl_bio' is valid.
Fixes: 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230310073855.1337560-5-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bc57292278a0b6ac4656cad94c14f2453344b57 ]
slot_store() uses kstrtouint() to get a slot number, but stores the
result in an "int" variable (by casting a pointer).
This can result in a negative slot number if the unsigned int value is
very large.
A negative number means that the slot is empty, but setting a negative
slot number this way will not remove the device from the array. I don't
think this is a serious problem, but it could cause confusion and it is
best to fix it.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d3aa3e060c4a80827eb801fc448debc9daa7c46b upstream.
Check alloc_precpu()'s return value and return an error from
dm_stats_init() if it fails. Update alloc_dev() to fail if
dm_stats_init() does.
Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup()
even if dm-stats isn't being actively used.
Fixes: fd2ed4d25270 ("dm: add statistics support")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9bbf5feecc7eab2c370496c1c161bbfe62084028 upstream.
This is an already known issue that dm-thin volume cannot be used as
swap, otherwise a deadlock may happen when dm-thin internal memory
demand triggers swap I/O on the dm-thin volume itself.
But thanks to commit a666e5c05e7c ("dm: fix deadlock when swapping to
encrypted device"), the limit_swap_bios target flag can also be used
for dm-thin to avoid the recursive I/O when it is used as swap.
Fix is to simply set ti->limit_swap_bios to true in both pool_ctr()
and thin_ctr().
In my test, I create a dm-thin volume /dev/vg/swap and use it as swap
device. Then I run fio on another dm-thin volume /dev/vg/main and use
large --blocksize to trigger swap I/O onto /dev/vg/swap.
The following fio command line is used in my test,
fio --name recursive-swap-io --lockmem 1 --iodepth 128 \
--ioengine libaio --filename /dev/vg/main --rw randrw \
--blocksize 1M --numjobs 32 --time_based --runtime=12h
Without this fix, the whole system can be locked up within 15 seconds.
With this fix, there is no any deadlock or hung task observed after
2 hours of running fio.
Furthermore, if blocksize is changed from 1M to 128M, after around 30
seconds fio has no visible I/O, and the out-of-memory killer message
shows up in kernel message. After around 20 minutes all fio processes
are killed and the whole system is back to being alive.
This is exactly what is expected when recursive I/O happens on dm-thin
volume when it is used as swap.
Depends-on: a666e5c05e7c ("dm: fix deadlock when swapping to encrypted device")
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f50714b57aecb6b3dc81d578e295f86d9c73f078 upstream.
When we need to zero some range on a block device, the function
__blkdev_issue_zero_pages submits a write bio with the bio vector pointing
to the zero page. If we use dm-flakey with corrupt bio writes option, it
will corrupt the content of the zero page which results in crashes of
various userspace programs. Glibc assumes that memory returned by mmap is
zeroed and it uses it for calloc implementation; if the newly mapped
memory is not zeroed, calloc will return non-zeroed memory.
Fix this bug by testing if the page is equal to ZERO_PAGE(0) and
avoiding the corruption in this case.
Cc: stable@vger.kernel.org
Fixes: a00f5276e266 ("dm flakey: Properly corrupt multi-page bios.")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa56b9b75996ff4c76a0a4181c2fa0206c3d91cc upstream.
If "corrupt_bio_byte" is set to corrupt reads and corrupt_bio_flags is
used, dm-flakey would erroneously return all writes as errors. Likewise,
if "corrupt_bio_byte" is set to corrupt writes, dm-flakey would return
errors for all reads.
Fix the logic so that if fc->corrupt_bio_byte is non-zero, dm-flakey
will not abort reads on writes with an error.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76227f6dc805e9e960128bcc6276647361e0827c ]
Otherwise on resource constrained systems these workqueues may be too
greedy.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4f80303c2353952e6e980b23914e4214487f2a6 ]
Otherwise on resource constrained systems these workqueues may be too
greedy.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b22ff5360f5c4e11050b89206370fdf7dc0a226 ]
Commit acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred
device removal") switched from using system workqueue to a single
workqueue local to DM. But it didn't eliminate the call to
flush_scheduled_work() that was introduced purely for the benefit of
deferred device removal with commit 2c140a246dc ("dm: allow remove to
be deferred").
Since DM core uses its own workqueue (and queue_work) there is no need
to call flush_scheduled_work() from local_exit(). local_exit()'s
destroy_workqueue(deferred_remove_workqueue) handles flushing work
started with queue_work().
Fixes: acfe0ad74d2e1 ("dm: allocate a special workqueue for deferred device removal")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19eb1650afeb1aa86151f61900e9e5f1de5d8d02 ]
If a thinpool set fail_io while suspending, resume will fail with:
device-mapper: resume ioctl on vg-thinpool failed: Invalid argument
The thin-pool also can't be removed if an in-flight bio is in the
deferred list.
This can be easily reproduced using:
echo "offline" > /sys/block/sda/device/state
dd if=/dev/zero of=/dev/mapper/thin bs=4K count=1
dmsetup suspend /dev/mapper/pool
mkfs.ext4 /dev/mapper/thin
dmsetup resume /dev/mapper/pool
The root cause is maybe_resize_data_dev() will check fail_io and return
error before called dm_resume.
Fix this by adding FAIL mode check at the end of pool_preresume().
Cc: stable@vger.kernel.org
Fixes: da105ed5fd7e ("dm thin metadata: introduce dm_pool_abort_metadata")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4555211190798b6b6fa2c37667d175bf67945c78 upstream.
- limit bitmap chunk size internal u64 variable to values not overflowing
the u32 bitmap superblock structure variable stored on persistent media
- assign bitmap chunk size internal u64 variable from unsigned values to
avoid possible sign extension artifacts when assigning from a s32 value
The bug has been there since at least kernel 4.0.
Steps to reproduce it:
1: mdadm -C /dev/mdx -l 1 --bitmap=internal --bitmap-chunk=256M -e 1.2
-n2 /dev/rnbd1 /dev/rnbd2
2 resize member device rnbd1 and rnbd2 to 8 TB
3 mdadm --grow /dev/mdx --size=max
The bitmap_chunksize will overflow without patch.
Cc: stable@vger.kernel.org
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b9973861cb2e96dcd0bb0f1baddc5c034207c5c upstream.
Otherwise the commit that will be aborted will be associated with the
metadata objects that will be torn down. Must write needs_check flag
to metadata with a reset block manager.
Found through code-inspection (and compared against dm-thin.c).
Cc: stable@vger.kernel.org
Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a459d8edbdbe7b24db42a5a9f21e6aa9e00c2aa upstream.
Dm_cache also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.
Therefore, cancelling timer again in destroy().
Cc: stable@vger.kernel.org
Fixes: c6b4fcbad044e ("dm: add cache target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88430ebcbc0ec637b710b947738839848c20feff upstream.
When dm_resume() and dm_destroy() are concurrent, it will
lead to UAF, as follows:
BUG: KASAN: use-after-free in __run_timers+0x173/0x710
Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0
<snip>
Call Trace:
<IRQ>
dump_stack_lvl+0x73/0x9f
print_report.cold+0x132/0xaa2
_raw_spin_lock_irqsave+0xcd/0x160
__run_timers+0x173/0x710
kasan_report+0xad/0x110
__run_timers+0x173/0x710
__asan_store8+0x9c/0x140
__run_timers+0x173/0x710
call_timer_fn+0x310/0x310
pvclock_clocksource_read+0xfa/0x250
kvm_clock_read+0x2c/0x70
kvm_clock_get_cycles+0xd/0x20
ktime_get+0x5c/0x110
lapic_next_event+0x38/0x50
clockevents_program_event+0xf1/0x1e0
run_timer_softirq+0x49/0x90
__do_softirq+0x16e/0x62c
__irq_exit_rcu+0x1fa/0x270
irq_exit_rcu+0x12/0x20
sysvec_apic_timer_interrupt+0x8e/0xc0
One of the concurrency UAF can be shown as below:
use free
do_resume |
__find_device_hash_cell |
dm_get |
atomic_inc(&md->holders) |
| dm_destroy
| __dm_destroy
| if (!dm_suspended_md(md))
| atomic_read(&md->holders)
| msleep(1)
dm_resume |
__dm_resume |
dm_table_resume_targets |
pool_resume |
do_waker #add delay work |
dm_put |
atomic_dec(&md->holders) |
| dm_table_destroy
| pool_dtr
| __pool_dec
| __pool_destroy
| destroy_workqueue
| kfree(pool) # free pool
time out
__do_softirq
run_timer_softirq # pool has already been freed
This can be easily reproduced using:
1. create thin-pool
2. dmsetup suspend pool
3. dmsetup resume pool
4. dmsetup remove_all # Concurrent with 3
The root cause of this UAF bug is that dm_resume() adds timer after
dm_destroy() skips cancelling the timer because of suspend status.
After timeout, it will call run_timer_softirq(), however pool has
already been freed. The concurrency UAF bug will happen.
Therefore, cancelling timer again in __pool_destroy().
Cc: stable@vger.kernel.org
Fixes: 991d9fa02da0d ("dm: add thin provisioning target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7991dbff6849f67e823b7cc0c15e5a90b0549b9f upstream.
Recently we found a softlock up problem in dm thin pool btree lookup
code due to corrupted metadata:
Kernel panic - not syncing: softlockup: hung tasks
CPU: 7 PID: 2669225 Comm: kworker/u16:3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: dm-thin do_worker [dm_thin_pool]
Call Trace:
<IRQ>
dump_stack+0x9c/0xd3
panic+0x35d/0x6b9
watchdog_timer_fn.cold+0x16/0x25
__run_hrtimer+0xa2/0x2d0
</IRQ>
RIP: 0010:__relink_lru+0x102/0x220 [dm_bufio]
__bufio_new+0x11f/0x4f0 [dm_bufio]
new_read+0xa3/0x1e0 [dm_bufio]
dm_bm_read_lock+0x33/0xd0 [dm_persistent_data]
ro_step+0x63/0x100 [dm_persistent_data]
btree_lookup_raw.constprop.0+0x44/0x220 [dm_persistent_data]
dm_btree_lookup+0x16f/0x210 [dm_persistent_data]
dm_thin_find_block+0x12c/0x210 [dm_thin_pool]
__process_bio_read_only+0xc5/0x400 [dm_thin_pool]
process_thin_deferred_bios+0x1a4/0x4a0 [dm_thin_pool]
process_one_work+0x3c5/0x730
Following process may generate a broken btree mixed with fresh and
stale btree nodes, which could get dm thin trapped in an infinite loop
while looking up data block:
Transaction 1: pmd->root = A, A->B->C // One path in btree
pmd->root = X, X->Y->Z // Copy-up
Transaction 2: X,Z is updated on disk, Y write failed.
// Commit failed, dm thin becomes read-only.
process_bio_read_only
dm_thin_find_block
__find_block
dm_btree_lookup(pmd->root)
The pmd->root points to a broken btree, Y may contain stale node
pointing to any block, for example X, which gets dm thin trapped into
a dead loop while looking up Z.
Fix this by setting pmd->root in __open_metadata(), so that dm thin
will use the last transaction's pmd->root if commit failed.
Fetch a reproducer in [Link].
Linke: https://bugzilla.kernel.org/show_bug.cgi?id=216790
Cc: stable@vger.kernel.org
Fixes: 991d9fa02da0 ("dm: add thin provisioning target")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3bd548e5b819b8c0f2c9085de775c5c7bff9052f ]
Check the return value of md_bitmap_get_counter() in case it returns
NULL pointer, which will result in a null pointer dereference.
v2: update the check to include other dereference
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e5dab5ec763d600fe0a67837dd9155bdc42f961 ]
This commit flushes the journal on suspend. It is prerequisite for the
next commit that enables activating dm integrity devices in read-only mode.
Note that we deliberately didn't flush the journal on suspend, so that the
journal replay code would be tested. However, the dm-integrity code is 5
years old now, so that journal replay is well-tested, and we can make this
change now.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4fe1ec995483737f3d2a14c3fe1d8fe634972979 upstream.
__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm_target_iterate" there is no lock held and the target
modules can be loaded at this point, so the second "dm_target_iterate"
call may need more space than what was the first "dm_target_iterate"
returned.
The code tries to handle this overflow (see the beginning of
list_version_get_info), however this handling is incorrect.
The code sets "param->data_size = param->data_start + needed" and
"iter_info.end = (char *)vers+len" - "needed" is the size returned by the
first dm_target_iterate call; "len" is the size of the buffer allocated by
userspace.
"len" may be greater than "needed"; in this case, the code will write up
to "len" bytes into the buffer, however param->data_size is set to
"needed", so it may write data past the param->data_size value. The ioctl
interface copies only up to param->data_size into userspace, thus part of
the result will be truncated.
Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this
guarantees that the second "dm_target_iterate" call will write only up to
the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it
overflows the "needed" space - in this case, userspace will allocate a
larger buffer and retry.
Note that there is also a bug in list_version_get_needed - we need to add
"strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)".
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1727fd5015d8f93474148f94e34cda5aa6ad4a43 upstream.
Current code produces a warning as shown below when total characters
in the constituent block device names plus the slashes exceeds 200.
snprintf() returns the number of characters generated from the given
input, which could cause the expression “200 – len” to wrap around
to a large positive number. Fix this by using scnprintf() instead,
which returns the actual number of characters written into the buffer.
[ 1513.267938] ------------[ cut here ]------------
[ 1513.267943] WARNING: CPU: 15 PID: 37247 at <snip>/lib/vsprintf.c:2509 vsnprintf+0x2c8/0x510
[ 1513.267944] Modules linked in: <snip>
[ 1513.267969] CPU: 15 PID: 37247 Comm: mdadm Not tainted 5.4.0-1085-azure #90~18.04.1-Ubuntu
[ 1513.267969] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 1513.267971] RIP: 0010:vsnprintf+0x2c8/0x510
<-snip->
[ 1513.267982] Call Trace:
[ 1513.267986] snprintf+0x45/0x70
[ 1513.267990] ? disk_name+0x71/0xa0
[ 1513.267993] dump_zones+0x114/0x240 [raid0]
[ 1513.267996] ? _cond_resched+0x19/0x40
[ 1513.267998] raid0_run+0x19e/0x270 [raid0]
[ 1513.268000] md_run+0x5e0/0xc50
[ 1513.268003] ? security_capable+0x3f/0x60
[ 1513.268005] do_md_run+0x19/0x110
[ 1513.268006] md_ioctl+0x195e/0x1f90
[ 1513.268007] blkdev_ioctl+0x91f/0x9f0
[ 1513.268010] block_ioctl+0x3d/0x50
[ 1513.268012] do_vfs_ioctl+0xa9/0x640
[ 1513.268014] ? __fput+0x162/0x260
[ 1513.268016] ksys_ioctl+0x75/0x80
[ 1513.268017] __x64_sys_ioctl+0x1a/0x20
[ 1513.268019] do_syscall_64+0x5e/0x200
[ 1513.268021] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 766038846e875 ("md/raid0: replace printk() with pr_*()")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74 ]
A complicated deadlock exists when using the journal and an elevated
group_thrtead_cnt. It was found with loop devices, but its not clear
whether it can be seen with real disks. The deadlock can occur simply
by writing data with an fio script.
When the deadlock occurs, multiple threads will hang in different ways:
1) The group threads will hang in the blk-wbt code with bios waiting to
be submitted to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
ops_run_io+0x46b/0x1a30
handle_stripe+0xcd3/0x36b0
handle_active_stripes.constprop.0+0x6f6/0xa60
raid5_do_work+0x177/0x330
Or:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
flush_deferred_bios+0x136/0x170
raid5_do_work+0x262/0x330
2) The r5l_reclaim thread will hang in the same way, submitting a
bio to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
submit_bio+0x3f/0xf0
md_super_write+0x12f/0x1b0
md_update_sb.part.0+0x7c6/0xff0
md_update_sb+0x30/0x60
r5l_do_reclaim+0x4f9/0x5e0
r5l_reclaim_thread+0x69/0x30b
However, before hanging, the MD_SB_CHANGE_PENDING flag will be
set for sb_flags in r5l_write_super_and_discard_space(). This
flag will never be cleared because the submit_bio() call never
returns.
3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe()
will do no processing on any pending stripes and re-set
STRIPE_HANDLE. This will cause the raid5d thread to enter an
infinite loop, constantly trying to handle the same stripes
stuck in the queue.
The raid5d thread has a blk_plug that holds a number of bios
that are also stuck waiting seeing the thread is in a loop
that never schedules. These bios have been accounted for by
blk-wbt thus preventing the other threads above from
continuing when they try to submit bios. --Deadlock.
To fix this, add the same wait_event() that is used in raid5_do_work()
to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will
schedule and wait until the flag is cleared. The schedule action will
flush the plug which will allow the r5l_reclaim thread to continue,
thus preventing the deadlock.
However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING
from the same thread and can thus deadlock if the thread is put to
sleep. So avoid waiting if md_check_recovery() is being called in the
loop.
It's not clear when the deadlock was introduced, but the similar
wait_event() call in raid5_do_work() was added in 2017 by this
commit:
16d997b78b15 ("md/raid5: simplfy delaying of writes while metadata
is updated.")
Link: https://lore.kernel.org/r/7f3b87b6-b52a-f737-51d7-a4eec5c44112@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2eed85bc75138a9eeb63863d20f8904ac42a577 ]
When doing degrade/recover tests using the journal a kernel BUG
is hit at drivers/md/raid5.c:4381 in handle_parity_checks5():
BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
This was found to occur because handle_stripe_fill() was skipped
for stripes in the journal due to a condition in that function.
Thus blocks were not fetched and R5_UPTODATE was not set when
the code reached handle_parity_checks5().
To fix this, don't skip handle_stripe_fill() unless the stripe is
for read.
Fixes: 07e83364845e ("md/r5cache: shift complex rmw from read path to write path")
Link: https://lore.kernel.org/linux-raid/e05c4239-41a9-d2f7-3cfa-4aa9d2cea8c1@deltatee.com/
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
