IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit ee457001ed6c6f31ddad69c24c1da8f377d8472d ]
We recently came across a V4 filesystem causing memory corruption
due to a newly allocated inode being setup twice and being added to
the superblock inode list twice. From code inspection, the only way
this could happen is if a newly allocated inode was not marked as
free on disk (i.e. di_mode wasn't zero).
Running the metadump on an upstream debug kernel fails during inode
allocation like so:
XFS: Assertion failed: ip->i_d.di_nblocks == 0, file: fs/xfs/xfs_inod=
e.c, line: 838
------------[ cut here ]------------
kernel BUG at fs/xfs/xfs_message.c:114!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 11 PID: 3496 Comm: mkdir Not tainted 4.16.0-rc5-dgc #442
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/0=
1/2014
RIP: 0010:assfail+0x28/0x30
RSP: 0018:ffffc9000236fc80 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 0000000000004000 RCX: 0000000000000000
RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff8227211b
RBP: ffffc9000236fce8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000bec R11: f000000000000000 R12: ffffc9000236fd30
R13: ffff8805c76bab80 R14: ffff8805c77ac800 R15: ffff88083fb12e10
FS: 00007fac8cbff040(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000=
000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fffa6783ff8 CR3: 00000005c6e2b003 CR4: 00000000000606e0
Call Trace:
xfs_ialloc+0x383/0x570
xfs_dir_ialloc+0x6a/0x2a0
xfs_create+0x412/0x670
xfs_generic_create+0x1f7/0x2c0
? capable_wrt_inode_uidgid+0x3f/0x50
vfs_mkdir+0xfb/0x1b0
SyS_mkdir+0xcf/0xf0
do_syscall_64+0x73/0x1a0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Extracting the inode number we crashed on from an event trace and
looking at it with xfs_db:
xfs_db> inode 184452204
xfs_db> p
core.magic = 0x494e
core.mode = 0100644
core.version = 2
core.format = 2 (extents)
core.nlinkv2 = 1
core.onlink = 0
.....
Confirms that it is not a free inode on disk. xfs_repair
also trips over this inode:
.....
zero length extent (off = 0, fsbno = 0) in ino 184452204
correcting nextents for inode 184452204
bad attribute fork in inode 184452204, would clear attr fork
bad nblocks 1 for inode 184452204, would reset to 0
bad anextents 1 for inode 184452204, would reset to 0
imap claims in-use inode 184452204 is free, would correct imap
would have cleared inode 184452204
.....
disconnected inode 184452204, would move to lost+found
And so we have a situation where the directory structure and the
inobt thinks the inode is free, but the inode on disk thinks it is
still in use. Where this corruption came from is not possible to
diagnose, but we can detect it and prevent the kernel from oopsing
on lookup. The reproducer now results in:
$ sudo mkdir /mnt/scratch/{0,1,2,3,4,5}{0,1,2,3,4,5}
mkdir: cannot create directory =E2=80=98/mnt/scratch/00=E2=80=99: File ex=
ists
mkdir: cannot create directory =E2=80=98/mnt/scratch/01=E2=80=99: File ex=
ists
mkdir: cannot create directory =E2=80=98/mnt/scratch/03=E2=80=99: Structu=
re needs cleaning
mkdir: cannot create directory =E2=80=98/mnt/scratch/04=E2=80=99: Input/o=
utput error
mkdir: cannot create directory =E2=80=98/mnt/scratch/05=E2=80=99: Input/o=
utput error
....
And this corruption shutdown:
[ 54.843517] XFS (loop0): Corruption detected! Free inode 0xafe846c not=
marked free on disk
[ 54.845885] XFS (loop0): Internal error xfs_trans_cancel at line 1023 =
of file fs/xfs/xfs_trans.c. Caller xfs_create+0x425/0x670
[ 54.848994] CPU: 10 PID: 3541 Comm: mkdir Not tainted 4.16.0-rc5-dgc #=
443
[ 54.850753] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIO=
S 1.10.2-1 04/01/2014
[ 54.852859] Call Trace:
[ 54.853531] dump_stack+0x85/0xc5
[ 54.854385] xfs_trans_cancel+0x197/0x1c0
[ 54.855421] xfs_create+0x425/0x670
[ 54.856314] xfs_generic_create+0x1f7/0x2c0
[ 54.857390] ? capable_wrt_inode_uidgid+0x3f/0x50
[ 54.858586] vfs_mkdir+0xfb/0x1b0
[ 54.859458] SyS_mkdir+0xcf/0xf0
[ 54.860254] do_syscall_64+0x73/0x1a0
[ 54.861193] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 54.862492] RIP: 0033:0x7fb73bddf547
[ 54.863358] RSP: 002b:00007ffdaa553338 EFLAGS: 00000246 ORIG_RAX: 0000=
000000000053
[ 54.865133] RAX: ffffffffffffffda RBX: 00007ffdaa55449a RCX: 00007fb73=
bddf547
[ 54.866766] RDX: 0000000000000001 RSI: 00000000000001ff RDI: 00007ffda=
a55449a
[ 54.868432] RBP: 00007ffdaa55449a R08: 00000000000001ff R09: 00005623a=
8670dd0
[ 54.870110] R10: 00007fb73be72d5b R11: 0000000000000246 R12: 000000000=
00001ff
[ 54.871752] R13: 00007ffdaa5534b0 R14: 0000000000000000 R15: 00007ffda=
a553500
[ 54.873429] XFS (loop0): xfs_do_force_shutdown(0x8) called from line 1=
024 of file fs/xfs/xfs_trans.c. Return address = ffffffff814cd050
[ 54.882790] XFS (loop0): Corruption of in-memory data detected. Shutt=
ing down filesystem
[ 54.884597] XFS (loop0): Please umount the filesystem and rectify the =
problem(s)
Note that this crash is only possible on v4 filesystemsi or v5
filesystems mounted with the ikeep mount option. For all other V5
filesystems, this problem cannot occur because we don't read inodes
we are allocating from disk - we simply overwrite them with the new
inode information.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Tested-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 77f18153c080855e1c3fb520ca31a4e61530121d upstream.
[Add an additional sprintf replacement in tools/perf/builtin-script.c]
With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:
tests/mem.c: In function ‘check’:
tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
snprintf(failure, sizeof failure, "unexpected %s", out);
The gcc docs says:
To avoid the warning either use a bigger buffer or handle the
function's return value which indicates whether or not its output
has been truncated.
Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6810158d526e483868e519befff407b91e76b3db upstream.
We were using a local buffer with an arbitrary size, that would have to
get increased to avoid truncation as warned by gcc 8:
util/annotate.c: In function 'symbol__disassemble':
util/annotate.c:1488:4: error: '%s' directive output may be truncated writing up to 4095 bytes into a region of size between 3966 and 8086 [-Werror=format-truncation=]
"%s %s%s --start-address=0x%016" PRIx64
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/annotate.c:1498:20:
symfs_filename, symfs_filename);
~~~~~~~~~~~~~~
util/annotate.c:1490:50: note: format string is defined here
" -l -d %s %s -C \"%s\" 2>/dev/null|grep -v \"%s:\"|expand",
^~
In file included from /usr/include/stdio.h:861,
from util/color.h:5,
from util/sort.h:8,
from util/annotate.c:14:
/usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 116 or more bytes (assuming 8331) into a destination of size 8192
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So switch to asprintf, that will make sure enough space is available.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qagoy2dmbjpc9gdnaj0r3mml@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80526491c2ca6abc028c0f0dbb0707a1f35fb18a upstream.
Fix to check kprobe blacklist address correctly with relocated address
by adjusting debuginfo address.
Since the address in the debuginfo is same as objdump, it is different
from relocated kernel address with KASLR. Thus, 'perf probe' always
misses to catch the blacklisted addresses.
Without this patch, 'perf probe' can not detect the blacklist addresses
on a KASLR enabled kernel.
# perf probe kprobe_dispatcher
Failed to write event: Invalid argument
Error: Failed to add events.
#
With this patch, it correctly shows the error message.
# perf probe kprobe_dispatcher
kprobe_dispatcher is blacklisted function, skip it.
Probe point 'kprobe_dispatcher' not found.
Error: Failed to add events.
#
Fixes: 9aaf5a5f479b ("perf probe: Check kprobes blacklist when adding new events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763966411.30755.5882376357738273695.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c4306f719b083d17df2963bc761777576b8ad1b upstream.
If xfs_bmap_extents_to_btree fails in a mode where we call
xfs_iroot_realloc(-1) to de-allocate the root, set the
format back to extents.
Otherwise we can assume we can dereference ifp->if_broot
based on the XFS_DINODE_FMT_BTREE format, and crash.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199423
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74edd08a4fbf51d65fd8f4c7d8289cd0f392bd91 upstream.
When executing the following command, we met kernel dump.
dmesg -c > /dev/null; cd /sys;
for i in `ls /sys/kernel/debug/regmap/* -d`; do
echo "Checking regmap in $i";
cat $i/registers;
done && grep -ri "0x02d0" *;
It is because the count value is too big, and kmalloc fails. So add an
upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8fdcabeac39824fe67480fd9508d80161c541854 ]
This driver is not working because of problems of its receiving code.
This patch fixes it to make it work.
When the driver receives an LAPB frame, it should first pass the frame
to the LAPB module to process. After processing, the LAPB module passes
the data (the packet) back to the driver, the driver should then add a
one-byte pseudo header and pass the data to upper layers.
The changes to the "x25_asy_bump" function and the
"x25_asy_data_indication" function are to correctly implement this
procedure.
Also, the "x25_asy_unesc" function ignores any frame that is shorter
than 3 bytes. However the shortest frames are 2-byte long. So we need
to change it to allow 2-byte frames to pass.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Reviewed-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76be93fc0702322179bb0ea87295d820ee46ad14 ]
Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight. It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.
The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.
Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17ad73e941b71f3bec7523ea4e9cbc3752461c2d ]
We recently added some bounds checking in ax25_connect() and
ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because
they were no longer required.
Unfortunately, I believe they are required to prevent integer overflows
so I have added them back.
Fixes: 8885bb0621f0 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()")
Fixes: 2f2a7ffad5c6 ("AX.25: Fix out-of-bounds read in ax25_connect()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 639f181f0ee20d3249dbc55f740f0167267180f0 ]
rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if
rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read.
Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read
as this particular error doesn't get stored in ->sk_err by the networking
core.
Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive
errors (there's no way for it to report which call, if any, the error was
caused by).
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b0a422772fec29811e293c7c0e6f991c0fd9241d ]
We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is
checked.
Fixes: b2bf1e2659b1 ("[UDP]: Clean up for IS_UDPLITE macro")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9bb5fbea59f36a589ef886292549ca4052fe676c ]
When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to
add a newline for easy reading.
root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout
0root@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7df5cb75cfb8acf96c7f2342530eb41e0c11f4c3 ]
IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.
Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8885bb0621f01a6c82be60a91e5fc0f6e2f71186 ]
Checks on `addr_len` and `usax->sax25_ndigis` are insufficient.
ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7
or 8. Fix it.
It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2f2a7ffad5c6cbf3d438e813cfdc88230e185ba6 ]
Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient.
ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis`
equals to 7 or 8. Fix it.
This issue has been reported as a KMSAN uninit-value bug, because in such
a case, ax25_connect() reaches into the uninitialized portion of the
`struct sockaddr_storage` statically allocated in __sys_connect().
It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`.
Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream.
This fix allows ath9k_htc modules to connect to WLAN once again.
Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reported-by: Roman Mamedov <rm@romanrm.net>
Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.
In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.
The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0
Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be6577af0cef934ccb036445314072e8cb9217b9 upstream.
Stalls are quite frequent with recent kernels. I enabled
CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803]
CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ #3
Hardware name: 9000/800/rp3440
IAOQ[0]: d_alloc_parallel+0x384/0x688
IAOQ[1]: d_alloc_parallel+0x388/0x688
RP(r2): d_alloc_parallel+0x134/0x688
Backtrace:
[<000000004036974c>] __lookup_slow+0xa4/0x200
[<0000000040369fc8>] walk_component+0x288/0x458
[<000000004036a9a0>] path_lookupat+0x88/0x198
[<000000004036e748>] filename_lookup+0xa0/0x168
[<000000004036e95c>] user_path_at_empty+0x64/0x80
[<000000004035d93c>] vfs_statx+0x104/0x158
[<000000004035dfcc>] __do_sys_lstat64+0x44/0x80
[<000000004035e5a0>] sys_lstat64+0x20/0x38
[<0000000040180054>] syscall_exit+0x0/0x14
The code was stuck in this loop in d_alloc_parallel:
4037d414: 0e 00 10 dc ldd 0(r16),ret0
4037d418: c7 fc 5f ed bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384>
4037d41c: 08 00 02 40 nop
This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in
d_alloc_parallel:
static inline void bit_spin_lock(int bitnum, unsigned long *addr)
{
/*
* Assuming the lock is uncontended, this never enters
* the body of the outer loop. If it is contended, then
* within the inner loop a non-atomic test is used to
* busywait with less bus contention for a good time to
* attempt to acquire the lock bit.
*/
preempt_disable();
#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
preempt_enable();
do {
cpu_relax();
} while (test_bit(bitnum, addr));
preempt_disable();
}
#endif
__acquire(bitlock);
}
After consideration, I realized that we must be losing bit unlocks.
Then, I noticed that we missed defining atomic64_set_release().
Adding this define fixes the stalls in bit operations.
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0b3e0b1a04367fc15c07f44e78361545b55357c upstream.
The !ATOMIC_IOMAP version of io_maping_init_wc will always return
success, even when the ioremap fails.
Since the ATOMIC_IOMAP version returns NULL when the init fails, and
callers check for a NULL return on error this is unexpected.
During a device probe, where the ioremap failed, a crash can look like
this:
BUG: unable to handle page fault for address: 0000000000210000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 177 Comm:
RIP: 0010:fill_page_dma [i915]
gen8_ppgtt_create [i915]
i915_ppgtt_create [i915]
intel_gt_init [i915]
i915_gem_init [i915]
i915_driver_probe [i915]
pci_device_probe
really_probe
driver_probe_device
The remap failure occurred much earlier in the probe. If it had been
propagated, the driver would have exited with an error.
Return NULL on ioremap failure.
[akpm@linux-foundation.org: detect ioremap_wc() errors earlier]
Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping")
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d22a9351035ef2ff12ef163a1091b8b8cf1e49c upstream.
It was hard to keep a test running, moving tasks between memcgs with
move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s
refcount is discovered to be 0 (supposedly impossible), so it is then
forced to REFCOUNT_SATURATED, and after thousands of warnings in quick
succession, the test is at last put out of misery by being OOM killed.
This is because of the way moved_swap accounting was saved up until the
task move gets completed in __mem_cgroup_clear_mc(), deferred from when
mem_cgroup_move_swap_account() actually exchanged old and new ids.
Concurrent activity can free up swap quicker than the task is scanned,
bringing id refcount down 0 (which should only be possible when
offlining).
Just skip that optimization: do that part of the accounting immediately.
Fixes: 615d66c37c75 ("mm: memcontrol: fix memcg id ref counter on swap charge move")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca9b31f6bb9c6aa9b4e5f0792f39a97bbffb8c51 upstream.
When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if
$(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit,
GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to
/usr/bin/ and Clang as of 11 will search for both
$(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.
GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle,
$(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice,
$(prefix)aarch64-linux-gnu/$needle rarely contains executables.
To better model how GCC's -B/--prefix takes in effect in practice, newer
Clang (since
3452a0d8c1)
only searches for $(prefix)$needle. Currently it will find /usr/bin/as
instead of /usr/bin/aarch64-linux-gnu-as.
Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
(/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the
appropriate cross compiling GNU as (when -no-integrated-as is in
effect).
Cc: stable@vger.kernel.org
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce684552a266cb1c7cc2f7e623f38567adec6653 upstream.
syzbot is reporting general protection fault in do_con_write() [1] caused
by vc->vc_screenbuf == ZERO_SIZE_PTR caused by vc->vc_screenbuf_size == 0
caused by vc->vc_cols == vc->vc_rows == vc->vc_size_row == 0 caused by
fb_set_var() from ioctl(FBIOPUT_VSCREENINFO) on /dev/fb0 , for
gotoxy(vc, 0, 0) from reset_terminal() from vc_init() from vc_allocate()
from con_install() from tty_init_dev() from tty_open() on such console
causes vc->vc_pos == 0x10000000e due to
((unsigned long) ZERO_SIZE_PTR) + -1U * 0 + (-1U << 1).
I don't think that a console with 0 column or 0 row makes sense. And it
seems that vc_do_resize() does not intend to allow resizing a console to
0 column or 0 row due to
new_cols = (cols ? cols : vc->vc_cols);
new_rows = (lines ? lines : vc->vc_rows);
exception.
Theoretically, cols and rows can be any range as long as
0 < cols * rows * 2 <= KMALLOC_MAX_SIZE is satisfied (e.g.
cols == 1048576 && rows == 2 is possible) because of
vc->vc_size_row = vc->vc_cols << 1;
vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row;
in visual_init() and kzalloc(vc->vc_screenbuf_size) in vc_allocate().
Since we can detect cols == 0 or rows == 0 via screenbuf_size = 0 in
visual_init(), we can reject kzalloc(0). Then, vc_allocate() will return
an error, and con_write() will not be called on a console with 0 column
or 0 row.
We need to make sure that integer overflow in visual_init() won't happen.
Since vc_do_resize() restricts cols <= 32767 and rows <= 32767, applying
1 <= cols <= 32767 and 1 <= rows <= 32767 restrictions to vc_allocate()
will be practically fine.
This patch does not touch con_init(), for returning -EINVAL there
does not help when we are not returning -ENOMEM.
[1] https://syzkaller.appspot.com/bug?extid=017265e8553724e514e8
Reported-and-tested-by: syzbot <syzbot+017265e8553724e514e8@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200712111013.11881-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 551e553f0d4ab623e2a6f424ab5834f9c7b5229c upstream.
Commit 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250
port") fixed limits of a baud rate setting for a generic 8250 port.
In other words since that commit the baud rate has been permitted to be
within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
normal for a standard 8250 UART port. But there are custom 8250 ports,
which provide extended baud rate limits. In particular the Mediatek 8250
port can work with baud rates up to "uartclk" speed.
Normally that and any other peculiarity is supposed to be handled in a
custom set_termios() callback implemented in the vendor-specific
8250-port glue-driver. Currently that is how it's done for the most of
the vendor-specific 8250 ports, but for some reason for Mediatek a
solution has been spread out to both the glue-driver and to the generic
8250-port code. Due to that a bug has been introduced, which permitted the
extended baud rate limit for all even for standard 8250-ports. The bug
has been fixed by the commit 7b668c064ec3 ("serial: 8250: Fix max baud
limit in generic 8250 port") by narrowing the baud rates limit back down to
the normal bounds. Unfortunately by doing so we also broke the
Mediatek-specific extended bauds feature.
A fix of the problem described above is twofold. First since we can't get
back the extended baud rate limits feature to the generic set_termios()
function and that method supports only a standard baud rates range, the
requested baud rate must be locally stored before calling it and then
restored back to the new termios structure after the generic set_termios()
finished its magic business. By doing so we still use the
serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
while the extended baud rate setting procedure will be performed later in
the custom Mediatek-specific set_termios() callback. Second since a true
baud rate is now fully calculated in the custom set_termios() method we
need to locally update the port timeout by calling the
uart_update_timeout() function. After the fixes described above are
implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
get back to normally working with extended baud rates.
Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com
Fixes: 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250 port")
Reported-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: stable <stable@vger.kernel.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20200714124113.20918-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 926234f1b8434c4409aa4c53637aa3362ca07cea upstream.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 1e15687ea472 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions")
Cc: <stable@vger.kernel.org> #3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc846e9db67c7e808d77bf9e2ef3d49e3820ce5d upstream.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this, adjusting the checks
for invalid channels so that enabled channel bits that would have been
lost by shifting are also checked for validity. Only channels 0 to 15
are valid.
Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it
Cc: <stable@vger.kernel.org> #4.0+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f07804ec77d77f8a9dcf570a24154e17747bc82f upstream.
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions
for the "interrupt" subdevice. When `data[0]` is
`INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When
`data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising
and falling edge detection for the digital trigger, using a base channel
number (or shift amount) in `data[3]`, a rising edge bitmask in
`data[4]` and falling edge bitmask in `data[5]`.
If the base channel number (shift amount) is greater than or equal to
the number of channels (24) of the digital input subdevice, there are no
changes to the rising and falling edges, so the mask of channels to be
changed can be set to 0, otherwise the mask of channels to be changed,
and the rising and falling edge bitmasks are shifted by the base channel
number before calling `ni6527_set_edge_detection()` to change the
appropriate registers. Unfortunately, the code is comparing the base
channel (shift amount) to the interrupt subdevice's number of channels
(1) instead of the digital input subdevice's number of channels (24).
Fix it by comparing to 32 because all shift amounts for an `unsigned
int` must be less than that and everything from bit 24 upwards is
ignored by `ni6527_set_edge_detection()` anyway.
Fixes: 110f9e687c1a8 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bd0db42a030b75c20028c7ba6e327b9cb554116 upstream.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> #3.8+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e6705182d4e1b77248a93470d6d7b3013d59b30 upstream.
This reverts commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2.
Upon additional testing with older servers, it was found that
the original commit introduced a regression when using the old SMB1
dialect and rsyncing over an existing file.
The patch will need to be respun to address this, likely including
a larger refactoring of the SMB1 and SMB3 rename code paths to make
it less confusing and also to address some additional rename error
cases that SMB3 may be able to workaround.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Patrick Fernie <patrick.fernie@gmail.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbb0897e805f2ab1b8bc358f6c3d878a376b8897 upstream.
The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA
addresses, which can cause silent memory corruption or IOMMU errors on
platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk
to fix this issue.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717112734.328432-1-cyrozap@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef upstream.
The wMaxPacketSize field of endpoint descriptor may be zero
as default value in alternate interface, and they are not
actually selected when start stream, so skip them when try to
allocate bandwidth.
Cc: stable <stable@vger.kernel.org>
Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1594360672-2076-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 81e96851ea32deb2c921c870eecabf335f598aeb ]
The clang integrated assembler requires the 'cmp' instruction to
have a length prefix here:
arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl')
cmp $0xffffffff,-24(%ebp)
^
Make this a 32-bit comparison, which it was clearly meant to be.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5afc78551bf5d53279036e0bf63314e35631d79f ]
Rather than open-code test_tsk_thread_flag() at each callsite, simply
replace the couple of offenders with calls to test_tsk_thread_flag()
directly.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8f8529e2c4141afa2ebb487ad48e8a6ec3e8c99 ]
gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87730ccbddcb48478b1b88e88b14e73424130764 ]
DMA transaction time to completion is a function of PCI bandwidth,
transaction size and a queue depth. So hard coded value for timeouts
might be wrong for some scenarios.
Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e84861fec32dee8a2e62bbaa52cded6b05a2a456 ]
This function is used by dev_get_regmap() to retrieve a regmap for the
specified device. If the device has more than one regmap, the name parameter
can be used to specify one.
The code here uses a pointer comparison to check for equal strings. This
however will probably always fail, as the regmap->name is allocated via
kstrdup_const() from the regmap's config->name.
Fix this by using strcmp() instead.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b78fac4b1ba731cf4177fdbc1e3a4661521bcd0 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5d81646fa294eed57786a9310b06ca48902adf8 ]
The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the
Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239)
of the Apple Wireless Keyboard (2009 ANSI version) <sigh>.
But its F1 - F10 keys are marked as sending F1 - F10, not the special
functions hid-apple.c maps them too; and since its descriptors do not
contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the
Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped
to key-codes which have not been set in the keybit array causing them
to not send any events at all.
The lack of a usage code matching the Fn key in the clone is actually
useful as this allows solving this problem in a generic way.
This commits adds a fn_found flag and it adds a input_configured
callback which checks if this flag is set once all usages have been
mapped. If it is not set, then assume this is a clone and clear the
quirks bitmap so that the hid-apple code does not add any special
handling to this keyboard.
This fixes F1 - F6 not sending anything at all and F7 - F12 sending
the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on
similar clones.
Cc: Joao Moreno <mail@joaomoreno.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43e666acb79f3d355dd89bf20f4d25d3b15da13e ]
The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Signed-off-by: Federico Ricchiuto <fed.ricchiuto@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d178770d8d21489abf5bafefcbb6d5243b482e9a ]
Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.
Change to remove the basepath prefix from all lines.
Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex")
Co-developed-by: Shik Chen <shik@chromium.org>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Shik Chen <shik@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bca9749b1aa23d964d3ab930938af66dbf887f15 ]
If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev)
should be called to free the ndev created earlier. Otherwise, a memleak
will occur.
Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 473309fb8372365ad211f425bca760af800e10a7 ]
From Documentation/networking/timestamping.txt:
A driver which supports hardware time stamping shall update the
struct with the actual, possibly more permissive configuration.
Do update the struct passed when we upscale the requested time
stamping mode.
Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c28d9a285668c799eeae2f7f93e929a6028a4d6d ]
If ax88172a_unbind() fails, make sure that the return code is
less than zero so that cleanup is done properly and avoid UAF.
Fixes: a9a51bd727d1 ("ax88172a: fix information leak on short answers")
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3195c4706b00106aa82c73acd28340fa8fc2bfc1 ]
The size used when calling 'pci_alloc_consistent()' and
'pci_free_consistent()' should match.
Fix it and have it consistent with the corresponding call in 'rr_close()'.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 163e9ef63641a02de4c95cd921577265c52e1ce2 ]
The driver was modified to not rely on rtnl lock to protect link
settings about 2 years ago. The pause setting was missed when
making that change. Fix it by acquiring link_lock mutex before
calling bnxt_hwrm_set_pause().
Fixes: e2dc9b6e38fa ("bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48cfa61b58a1fee0bc49eef04f8ccf31493b7cdd ]
It is possible to cause a btrfs mount to fail by racing it with a slow
umount. The crux of the sequence is generic_shutdown_super not yet
calling sop->put_super before btrfs_mount_root calls btrfs_open_devices.
If that occurs, btrfs_open_devices will decide the opened counter is
non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to
0. From here, mount will call sget which will result in grab_super
trying to take the super block umount semaphore. That semaphore will be
held by the slow umount, so mount will block. Before up-ing the
semaphore, umount will delete the super block, resulting in mount's sget
reliably allocating a new one, which causes the mount path to dutifully
fill it out, and increment total_rw_bytes a second time, which causes
the mount to fail, as we see double the expected bytes.
Here is the sequence laid out in greater detail:
CPU0 CPU1
down_write sb->s_umount
btrfs_kill_super
kill_anon_super(sb)
generic_shutdown_super(sb);
shrink_dcache_for_umount(sb);
sync_filesystem(sb);
evict_inodes(sb); // SLOW
btrfs_mount_root
btrfs_scan_one_device
fs_devices = device->fs_devices
fs_info->fs_devices = fs_devices
// fs_devices-opened makes this a no-op
btrfs_open_devices(fs_devices, mode, fs_type)
s = sget(fs_type, test, set, flags, fs_info);
find sb in s_instances
grab_super(sb);
down_write(&s->s_umount); // blocks
sop->put_super(sb)
// sb->fs_devices->opened == 2; no-op
spin_lock(&sb_lock);
hlist_del_init(&sb->s_instances);
spin_unlock(&sb_lock);
up_write(&sb->s_umount);
return 0;
retry lookup
don't find sb in s_instances (deleted by CPU0)
s = alloc_super
return s;
btrfs_fill_super(s, fs_devices, data)
open_ctree // fs_devices total_rw_bytes improperly set!
btrfs_read_chunk_tree
read_one_dev // increment total_rw_bytes again!!
super_total_bytes < fs_devices->total_rw_bytes // ERROR!!!
To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree
before the calls to read_one_dev, while holding the sb umount semaphore
and the uuid mutex.
To reproduce, it is sufficient to dirty a decent number of inodes, then
quickly umount and mount.
for i in $(seq 0 500)
do
dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1
done
umount /mnt/foo&
mount /mnt/foo
does the trick for me.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
