IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 831e3405c2a344018a18fcc2665acc5a38c3a707 ]
The current scanning mechanism is supposed to fall back to a synchronous
host scan if an asynchronous scan is in progress. However, this rule isn't
strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when
checking shost->async_scan. When scsi_scan_host() is called concurrently,
two async scans on same host can be started and a hang in do_scan_async()
is observed.
Fixes this issue by checking & setting shost->async_scan atomically with
shost->scan_mutex.
Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca05f33316559a04867295dd49f85aeedbfd6bfd ]
The reserved-memory overlap detection code fails to detect overlaps if
either of the regions starts at address 0x0. The code explicitly checks
for and ignores such regions, apparently in order to ignore dynamically
allocated regions which have an address of 0x0 at this point. These
dynamically allocated regions also have a size of 0x0 at this point, so
fix this by removing the check and sorting the dynamically allocated
regions ahead of any static regions at address 0x0.
For example, there are two overlaps in this case but they are not
currently reported:
foo@0 {
reg = <0x0 0x2000>;
};
bar@0 {
reg = <0x0 0x1000>;
};
baz@1000 {
reg = <0x1000 0x1000>;
};
quux {
size = <0x1000>;
};
but they are after this patch:
OF: reserved mem: OVERLAP DETECTED!
bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000)
OF: reserved mem: OVERLAP DETECTED!
foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000)
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afc18069a2cb7ead5f86623a5f3d4ad6e21f940d ]
kexec_file_load() currently reuses the old boot_params.screen_info,
but if drivers have change the hardware state, boot_param.screen_info
could contain invalid info.
For example, the video type might be no longer VGA, or the frame buffer
address might be changed. If the kexec kernel keeps using the old screen_info,
kexec'ed kernel may attempt to write to an invalid framebuffer
memory region.
There are two screen_info instances globally available, boot_params.screen_info
and screen_info. Later one is a copy, and is updated by drivers.
So let kexec_file_load use the updated copy.
[ mingo: Tidied up the changelog. ]
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20201014092429.1415040-2-kasong@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dea252fa41cd8ce332d148444e4799235a8a03ec ]
When running dtbs_check thermal_zone warn about the
temperature declared.
thermal-zones: cpu-thermal:trips:cpu-alert0:temperature:0:0: 850000 is greater than the maximum of 200000
It's indeed wrong the real value is 85°C and not 850°C.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201003100332.431178-1-peron.clem@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c1acb4ac1a892cf08d27efcb964ad281728b0545 upstream.
The nesting count of trace_printk allows for 4 levels of nesting. The
nesting counter starts at zero and is incremented before being used to
retrieve the current context's buffer. But the index to the buffer uses the
nesting counter after it was incremented, and not its original number,
which in needs to do.
Link: https://lkml.kernel.org/r/20201029161905.4269-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: 3d9622c12c887 ("tracing: Add barrier to trace_printk() buffer nesting modification")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 726b3d3f141fba6f841d715fc4d8a4a84f02c02a upstream.
When an interrupt or NMI comes in and switches the context, there's a delay
from when the preempt_count() shows the update. As the preempt_count() is
used to detect recursion having each context have its own bit get set when
tracing starts, and if that bit is already set, it is considered a recursion
and the function exits. But if this happens in that section where context
has changed but preempt_count() has not been updated, this will be
incorrectly flagged as a recursion.
To handle this case, create another bit call TRANSITION and test it if the
current context bit is already set. Flag the call as a recursion if the
TRANSITION bit is already set, and if not, set it and continue. The
TRANSITION bit will be cleared normally on the return of the function that
set it, or if the current context bit is clear, set it and clear the
TRANSITION bit to allow for another transition between the current context
and an even higher one.
Cc: stable@vger.kernel.org
Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee11b93f95eabdf8198edd4668bf9102e7248270 upstream.
The code that checks recursion will work to only do the recursion check once
if there's nested checks. The top one will do the check, the other nested
checks will see recursion was already checked and return zero for its "bit".
On the return side, nothing will be done if the "bit" is zero.
The problem is that zero is returned for the "good" bit when in NMI context.
This will set the bit for NMIs making it look like *all* NMI tracing is
recursing, and prevent tracing of anything in NMI context!
The simple fix is to return "bit + 1" and subtract that bit on the end to
get the real bit.
Cc: stable@vger.kernel.org
Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6993d0fdbee0eb38bfac350aa016f65ad11ed3b1 upstream.
There is a small race window when a delayed work is being canceled and
the work still might be queued from the timer_fn:
CPU0 CPU1
kthread_cancel_delayed_work_sync()
__kthread_cancel_work_sync()
__kthread_cancel_work()
work->canceling++;
kthread_delayed_work_timer_fn()
kthread_insert_work();
BUG: kthread_insert_work() should not get called when work->canceling is
set.
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201014083030.16895-1-qiang.zhang@windriver.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9522750c66c689b739e151fcdf895420dc81efc0 upstream.
Commit 6735b4632def ("Fonts: Support FONT_EXTRA_WORDS macros for built-in
fonts") introduced the following error when building rpc_defconfig (only
this build appears to be affected):
`acorndata_8x8' referenced in section `.text' of arch/arm/boot/compressed/ll_char_wr.o:
defined in discarded section `.data' of arch/arm/boot/compressed/font.o
`acorndata_8x8' referenced in section `.data.rel.ro' of arch/arm/boot/compressed/font.o:
defined in discarded section `.data' of arch/arm/boot/compressed/font.o
make[3]: *** [/scratch/linux/arch/arm/boot/compressed/Makefile:191: arch/arm/boot/compressed/vmlinux] Error 1
make[2]: *** [/scratch/linux/arch/arm/boot/Makefile:61: arch/arm/boot/compressed/vmlinux] Error 2
make[1]: *** [/scratch/linux/arch/arm/Makefile:317: zImage] Error 2
The .data section is discarded at link time. Reinstating acorndata_8x8 as
const ensures it is still available after linking. Do the same for the
other 12 built-in fonts as well, for consistency purposes.
Cc: <stable@vger.kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 6735b4632def ("Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Co-developed-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102183242.2031659-1-yepeilin.cs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d6a076d68c6b5d6a5800f3990a513facb7016dea ]
When PTP timestamping is enabled on Tx, the controller
inserts the Tx timestamp at the beginning of the frame
buffer, between SFD and the L2 frame header. This means
that the skb provided by the stack is required to have
enough headroom otherwise a new skb needs to be created
by the driver to accommodate the timestamp inserted by h/w.
Up until now the driver was relying on the second option,
using skb_realloc_headroom() to create a new skb to accommodate
PTP frames. Turns out that this method is not reliable, as
reallocation of skbs for PTP frames along with the required
overhead (skb_set_owner_w, consume_skb) is causing random
crashes in subsequent skb_*() calls, when multiple concurrent
TCP streams are run at the same time on the same device
(as seen in James' report).
Note that these crashes don't occur with a single TCP stream,
nor with multiple concurrent UDP streams, but only when multiple
TCP streams are run concurrently with the PTP packet flow
(doing skb reallocation).
This patch enforces the first method, by requesting enough
headroom from the stack to accommodate PTP frames, and so avoiding
skb_realloc_headroom() & co, and the crashes no longer occur.
There's no reason not to set needed_headroom to a large enough
value to accommodate PTP frames, so in this regard this patch
is a fix.
Reported-by: James Jurack <james.jurack@ametek.com>
Fixes: bee9e58c9e98 ("gianfar:don't add FCB length to hard_header_len")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201020173605.1173-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d145c9031325fed963a887851d9fa42516efd52b ]
When PTP timestamping is enabled on Tx, the controller
inserts the Tx timestamp at the beginning of the frame
buffer, between SFD and the L2 frame header. This means
that the skb provided by the stack is required to have
enough headroom otherwise a new skb needs to be created
by the driver to accommodate the timestamp inserted by h/w.
Up until now the driver was relying on skb_realloc_headroom()
to create new skbs to accommodate PTP frames. Turns out that
this method is not reliable in this context at least, as
skb_realloc_headroom() for PTP frames can cause random crashes,
mostly in subsequent skb_*() calls, when multiple concurrent
TCP streams are run at the same time with the PTP flow
on the same device (as seen in James' report). I also noticed
that when the system is loaded by sending multiple TCP streams,
the driver receives cloned skbs in large numbers.
skb_cow_head() instead proves to be stable in this scenario,
and not only handles cloned skbs too but it's also more efficient
and widely used in other drivers.
The commit introducing skb_realloc_headroom in the driver
goes back to 2009, commit 93c1285c5d92
("gianfar: reallocate skb when headroom is not enough for fcb").
For practical purposes I'm referencing a newer commit (from 2012)
that brings the code to its current structure (and fixes the PTP
case).
Fixes: 9c4886e5e63b ("gianfar: Fix invalid TX frames returned on error queue when time stamping")
Reported-by: James Jurack <james.jurack@ametek.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20201029081057.8506-1-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0891fb39ba67bd7ae023ea0d367297ffff010781 upstream.
Since commit c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Xen is using the chip_data pointer for storing IRQ specific data. When
running as a HVM domain this can result in problems for legacy IRQs, as
those might use chip_data for their own purposes.
Use a local array for this purpose in case of legacy IRQs, avoiding the
double use.
Cc: stable@vger.kernel.org
Fixes: c330fb1ddc0a ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Stefan Bader <stefan.bader@canonical.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200930091614.13660-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49d28ebdf1e30d806410eefc7de0a7a1ca5d747c upstream.
Currently in case of alignment or FCS error if the packet cannot be
corrected it's still not dropped. Report the error properly and drop the
packet while making the code around a little bit more readable.
Fixes: 80ff0fd3ab64 ("Staging: Add octeon-ethernet driver files.")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201016145630.41852-1-alexander.sverdlin@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 179f5dc36b0a1aa31538d7d8823deb65c39847b3 upstream.
The PHYs must be registered once in device probe function, not in device
open callback because it's only possible to register them once.
Fixes: a25e278020bf ("staging: octeon: support fixed-link phys")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201016101858.11374-1-alexander.sverdlin@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 647a6002cb41d358d9ac5de101a8a6dc74748a59 upstream.
The "cb_pcidas" driver supports asynchronous commands on the analog
output (AO) subdevice for those boards that have an AO FIFO. The code
(in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to
validate and set up the command supports output to a single channel or
to two channels simultaneously (the boards have two AO channels).
However, the code in `cb_pcidas_auto_attach()` that initializes the
subdevices neglects to initialize the AO subdevice's `len_chanlist`
member, leaving it set to 0, but the Comedi core will "correct" it to 1
if the driver neglected to set it. This limits commands to use a single
channel (either channel 0 or 1), but the limit should be two channels.
Set the AO subdevice's `len_chanlist` member to be the same value as the
`n_chan` member, which will be 2.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20201021122142.81628-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4a1c2c7f63c52ccb11770b5ae25920a6b79d3548 upstream.
The DBGD{CCINT,SCRext} and DBGVCR register entries in the cp14 array
are missing their target register, resulting in all accesses being
targetted at the guard sysreg (indexed by __INVALID_SYSREG__).
Point the emulation code at the actual register entries.
Fixes: bdfb4b389c8d ("arm64: KVM: add trap handlers for AArch32 debug registers")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201029172409.2768336-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99aed9227073fb34ce2880cbc7063e04185a65e1 upstream.
It appears that firmware nodes can be shared between devices. In such case
when a (child) device is about to be deleted, its firmware node may be shared
and ACPI_COMPANION_SET(..., NULL) call for it breaks the secondary link
of the shared primary firmware node.
In order to prevent that, check, if the device has a parent and parent's
firmware node is shared with its child, and avoid crashing the link.
Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()")
Reported-by: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5dcce0c414fcbfe4c2037b66ac69ea5f9b3f75c upstream.
Behind primary and secondary we understand the type of the nodes
which might define their ordering. However, if primary node gone,
we can't maintain the ordering by definition of the linked list.
Thus, by ordering secondary node becomes first in the list.
But in this case the meaning of it is still secondary (or auxiliary).
The type of the node is maintained by the secondary pointer in it:
secondary pointer Meaning
NULL or valid primary node
ERR_PTR(-ENODEV) secondary node
So, if by some reason we do the following sequence of calls
set_primary_fwnode(dev, NULL);
set_primary_fwnode(dev, primary);
we should preserve secondary node.
This concept is supported by the description of set_primary_fwnode()
along with implementation of set_secondary_fwnode(). Hence, fix
the commit c15e1bdda436 to follow this as well.
Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()")
Cc: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6d7cde84f6c5551586c8b9b68d70f8e6dc9a000 upstream.
Commit f6361c6b3880 ("ARM: S3C24XX: remove separate restart code")
removed usage of the watchdog reset platform code in favor of the
Samsung SoC watchdog driver. However the latter was not selected thus
S3C24xx platforms lost reset abilities.
Cc: <stable@vger.kernel.org>
Fixes: f6361c6b3880 ("ARM: S3C24XX: remove separate restart code")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7be0d19c751b02db778ca95e3274d5ea7f31891c upstream.
Selecting CONFIG_SAMSUNG_PM_DEBUG (depending on CONFIG_DEBUG_LL) but
without CONFIG_MMU leads to build errors:
arch/arm/plat-samsung/pm-debug.c: In function ‘s3c_pm_uart_base’:
arch/arm/plat-samsung/pm-debug.c:57:2: error:
implicit declaration of function ‘debug_ll_addr’ [-Werror=implicit-function-declaration]
Fixes: 99b2fc2b8b40 ("ARM: SAMSUNG: Use debug_ll_addr() to get UART base address")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200910154150.3318-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 879bc2d27904354b98ca295b6168718e045c4aa2 upstream.
When starting a HP machine with HIL driver but without an HIL keyboard
or HIL mouse attached, it may happen that data written to the HIL loop
gets stuck (e.g. because the transaction queue is full). Usually one
will then have to reboot the machine because all you see is and endless
output of:
Transaction add failed: transaction already queued?
In the higher layers hp_sdc_enqueue_transaction() is called to queued up
a HIL packet. This function returns an error code, and this patch adds
the necessary checks for this return code and disables the HIL driver if
further packets can't be sent.
Tested on a HP 730 and a HP 715/64 machine.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0fc70ce1f028e14a37c186d9f7a55e51439b83a upstream.
Berlin SoCs always contain some DW APB timers which can be used as an
always-on broadcast timer.
Link: https://lore.kernel.org/r/20201009150536.214181fb@xhacker.debian
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90bfdeef83f1d6c696039b6a917190dcbbad3220 upstream.
Some of the font tty ioctl's always used the current foreground VC for
their operations. Don't do that then.
This fixes a data race on fg_console.
Side note: both Michael Ellerman and Jiri Slaby point out that all these
ioctls are deprecated, and should probably have been removed long ago,
and everything seems to be using the KDFONTOP ioctl instead.
In fact, Michael points out that it looks like busybox's loadfont
program seems to have switched over to using KDFONTOP exactly _because_
of this bug (ahem.. 12 years ago ;-).
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3b14296da69adb7825022f3224ac6137eb30abf upstream.
The way the driver is implemented is buggy for the (admittedly unlikely)
use case where there are two RTCs with one having an interrupt configured
and the second not. This is caused by the fact that we use a global
rtc_class_ops struct which we modify depending on whether the irq number
is present or not.
Fix it by using two const ops structs with and without alarm operations.
While at it: not being able to request a configured interrupt is an error
so don't ignore it and bail out of probe().
Fixes: ed13d89b08e3 ("rtc: Add Epson RX8010SJ RTC driver")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5745bcfbbf89b158416075374254d3c013488f21 upstream.
If riov and wiov are both defined and they point to different
objects, only riov is initialized. If the wiov is not initialized
by the caller, the function fails returning -EINVAL and printing
"Readable desc 0x... after writable" error message.
This issue happens when descriptors have both readable and writable
buffers (eg. virtio-blk devices has virtio_blk_outhdr in the readable
buffer and status as last byte of writable buffer) and we call
__vringh_iov() to get both type of buffers in two different iovecs.
Let's replace the 'else if' clause with 'if' to initialize both
riov and wiov if they are not NULL.
As checkpatch pointed out, we also avoid crashing the kernel
when riov and wiov are both NULL, replacing BUG() with WARN_ON()
and returning -EINVAL.
Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201008204256.162292-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a1754b2a97efa644aa6e84d1db5b17c42251483 upstream.
We don't need to check the new buffer size, and the return value
had confused resize_buffer_duplicate_size().
...
ret = ring_buffer_resize(trace_buf->buffer,
per_cpu_ptr(size_buf->data,cpu_id)->entries, cpu_id);
if (ret == 0)
per_cpu_ptr(trace_buf->data, cpu_id)->entries =
per_cpu_ptr(size_buf->data, cpu_id)->entries;
...
Link: https://lkml.kernel.org/r/20201019142242.11560-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: d60da506cbeb3 ("tracing: Add a resize function to make one buffer equivalent to another buffer")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5f7ab168b9a60e12a4b8f2bb6fcc91321dc23c1 upstream.
On 32-bit systems, this multiplication will overflow for files larger
than 4GB.
Link: http://lkml.kernel.org/r/20201004180428.14494-2-willy@infradead.org
Cc: stable@vger.kernel.org
Fixes: fb89b45cdfdc ("9P: introduction of a new cache=mmap model.")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28e1581c3b4ea5f98530064a103c6217bedeea73 upstream.
con->out_msg must be cleared on Policy::stateful_server
(!CEPH_MSG_CONNECT_LOSSY) faults. Not doing so botches the
reconnection attempt, because after writing the banner the
messenger moves on to writing the data section of that message
(either from where it got interrupted by the connection reset or
from the beginning) instead of writing struct ceph_msg_connect.
This results in a bizarre error message because the server
sends CEPH_MSGR_TAG_BADPROTOVER but we think we wrote struct
ceph_msg_connect:
libceph: mds0 (1)172.21.15.45:6828 socket error on write
ceph: mds0 reconnect start
libceph: mds0 (1)172.21.15.45:6829 socket closed (con state OPEN)
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch, my 32 != server's 32
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch
AFAICT this bug goes back to the dawn of the kernel client.
The reason it survived for so long is that only MDS sessions
are stateful and only two MDS messages have a data section:
CEPH_MSG_CLIENT_RECONNECT (always, but reconnecting is rare)
and CEPH_MSG_CLIENT_REQUEST (only when xattrs are involved).
The connection has to get reset precisely when such message
is being sent -- in this case it was the former.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/47723
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c403c3a2fbe24d4ed33e10cabad048583ebd4edf upstream.
On 32-bit systems, this shift will overflow for files larger than 4GB.
Cc: stable@vger.kernel.org
Fixes: 61f68816211e ("ceph: check caps in filemap_fault and page_mkwrite")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d005f8c6588efcfbe88099b6edafc6f58c84a9c1 upstream.
A detach hung is possible when a race occurs between the detach process
and the ubi background thread. The following sequences outline the race:
ubi thread: if (list_empty(&ubi->works)...
ubi detach: set_bit(KTHREAD_SHOULD_STOP, &kthread->flags)
=> by kthread_stop()
wake_up_process()
=> ubi thread is still running, so 0 is returned
ubi thread: set_current_state(TASK_INTERRUPTIBLE)
schedule()
=> ubi thread will never be scheduled again
ubi detach: wait_for_completion()
=> hung task!
To fix that, we need to check kthread_should_stop() after we set the
task state, so the ubi thread will either see the stop bit and exit or
the task state is reset to runnable such that it isn't scheduled out
indefinitely.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: <stable@vger.kernel.org>
Fixes: 801c135ce73d5df1ca ("UBI: Unsorted Block Images")
Reported-by: syzbot+853639d0cb16c31c7a14@syzkaller.appspotmail.com
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58f6e78a65f1fcbf732f60a7478ccc99873ff3ba upstream.
Fix some potential memory leaks in error handling branches while
iterating dent entries. For example, function dbg_check_dir()
forgets to free pdent if it exists.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c2ac05a2 ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aea948bb80b478ddc2448f7359d574387521a52d upstream.
Every error log reported by OPAL is exported to userspace through a
sysfs interface and notified using kobject_uevent(). The userspace
daemon (opal_errd) then reads the error log and acknowledges the error
log is saved safely to disk. Once acknowledged the kernel removes the
respective sysfs file entry causing respective resources to be
released including kobject.
However it's possible the userspace daemon may already be scanning
elog entries when a new sysfs elog entry is created by the kernel.
User daemon may read this new entry and ack it even before kernel can
notify userspace about it through kobject_uevent() call. If that
happens then we have a potential race between
elog_ack_store->kobject_put() and kobject_uevent which can lead to
use-after-free of a kernfs object resulting in a kernel crash. eg:
BUG: Unable to handle kernel data access on read at 0x6b6b6b6b6b6b6bfb
Faulting instruction address: 0xc0000000008ff2a0
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
CPU: 27 PID: 805 Comm: irq/29-opal-elo Not tainted 5.9.0-rc2-gcc-8.2.0-00214-g6f56a67bcbb5-dirty #363
...
NIP kobject_uevent_env+0xa0/0x910
LR elog_event+0x1f4/0x2d0
Call Trace:
0x5deadbeef0000122 (unreliable)
elog_event+0x1f4/0x2d0
irq_thread_fn+0x4c/0xc0
irq_thread+0x1c0/0x2b0
kthread+0x1c4/0x1d0
ret_from_kernel_thread+0x5c/0x6c
This patch fixes this race by protecting the sysfs file
creation/notification by holding a reference count on kobject until we
safely send kobject_uevent().
The function create_elog_obj() returns the elog object which if used
by caller function will end up in use-after-free problem again.
However, the return value of create_elog_obj() function isn't being
used today and there is no need as well. Hence change it to return
void to make this fix complete.
Fixes: 774fea1a38c6 ("powerpc/powernv: Read OPAL error log and export it through sysfs")
Cc: stable@vger.kernel.org # v3.15+
Reported-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Rework the logic to use a single return, reword comments, add oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201006122051.190176-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a02f6d42357acf6e5de6ffc728e6e77faf3ad217 upstream.
It's not done anything for a long time. Save the percpu variable, and
emit a warning to remind users to not expect it to do anything.
This uses pr_warn_once instead of pr_warn_ratelimit as testing
'ppc64_cpu --smt=off' on a 24 core / 4 SMT system showed the warning
to be noisy, as the online/offline loop is slow.
Fixes: 3fa8cad82b94 ("powerpc/pseries/cpuidle: smt-snooze-delay cleanup.")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902000012.3440389-1-joel@jms.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10ab7cfd5522f0041028556dac864a003e158556 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 16 byte array of smaller elements on the stack.
This is fixed by using an explicit c structure. As there are no
holes in the structure, there is no possiblity of data leakage
in this case.
The explicit alignment of ts is not strictly necessary but potentially
makes the code slightly less fragile. It also removes the possibility
of this being cut and paste into another driver where the alignment
isn't already true.
Fixes: 36e0371e7764 ("iio:itg3200: Use iio_push_to_buffers_with_timestamp()")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200722155103.979802-6-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 293e809b2e8e608b65a949101aaf7c0bd1224247 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
We move to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak apart from previous readings. Note that previously
no leak at all could occur, but previous readings should never
be a problem.
In this case the timestamp location depends on what other channels
are enabled. As such we can't use a structure without misleading
by suggesting only one possible timestamp location.
Fixes: 50a6edb1b6e0 ("iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200722155103.979802-26-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0456ecf34d466261970e0ff92b2b9c78a4908637 upstream.
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses a 24 byte array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable array in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc so no
data can leak appart from previous readings.
Depending on the enabled channels, the location of the timestamp
can be at various aligned offsets through the buffer. As such we
any use of a structure to enforce this alignment would incorrectly
suggest a single location for the timestamp. Comments adjusted to
express this clearly in the code.
Fixes: ac45e57f1590 ("iio: light: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensors")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200722155103.979802-9-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baf6fd97b16ea8f981b8a8b04039596f32fc2972 upstream.
The jz4780_dma_tx_status() function would check if a channel's cookie
state was set to 'completed', and if not, it would enter the critical
section. However, in that time frame, the jz4780_dma_chan_irq() function
was able to set the cookie to 'completed', and clear the jzchan->vchan
pointer, which was deferenced in the critical section of the first
function.
Fix this race by checking the channel's cookie state after entering the
critical function and not before.
Fixes: d894fc6046fe ("dmaengine: jz4780: add driver for the Ingenic JZ4780 DMA controller")
Cc: stable@vger.kernel.org # v4.0
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Link: https://lore.kernel.org/r/20201004140307.885556-1-paul@crapouillou.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82e61c3909db51d91b9d3e2071557b6435018b80 upstream.
Both read-side users of func_table/func_buf need locking. Without that,
one can easily confuse the code by repeatedly setting altering strings
like:
while (1)
for (a = 0; a < 2; a++) {
struct kbsentry kbs = {};
strcpy((char *)kbs.kb_string, a ? ".\n" : "88888\n");
ioctl(fd, KDSKBSENT, &kbs);
}
When that program runs, one can get unexpected output by holding F1
(note the unxpected period on the last line):
.
88888
.8888
So protect all accesses to 'func_table' (and func_buf) by preexisting
'func_buf_lock'.
It is easy in 'k_fn' handler as 'puts_queue' is expected not to sleep.
On the other hand, KDGKBSENT needs a local (atomic) copy of the string
because copy_to_user can sleep. Use already allocated, but unused
'kbs->kb_string' for that purpose.
Note that the program above needs at least CAP_SYS_TTY_CONFIG.
This depends on the previous patch and on the func_buf_lock lock added
in commit 46ca3f735f34 (tty/vt: fix write/write race in ioctl(KDSKBSENT)
handler) in 5.2.
Likely fixes CVE-2020-25656.
Cc: <stable@vger.kernel.org>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20201019085517.10176-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ca03f90527e499dd5e32d6522909e2ad390896b upstream.
Use 'strlen' of the string, add one for NUL terminator and simply do
'copy_to_user' instead of the explicit 'for' loop. This makes the
KDGKBSENT case more compact.
The only thing we need to take care about is NULL 'func_table[i]'. Use
an empty string in that case.
The original check for overflow could never trigger as the func_buf
strings are always shorter or equal to 'struct kbsentry's.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20201019085517.10176-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3cd54a618834430a26a648d880dd83d740f2ae30 upstream.
fsl_usb2_device_register() should stop init if dma_set_mask() return
error.
Fixes: cae058610465 ("drivers/usb/host: fsl: Set DMA_MASK of usb platform device")
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Link: https://lore.kernel.org/r/20201010060308.33693-1-ran.wang_1@nxp.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03c1fd622f72c7624c81b64fdba4a567ae5ee9cb upstream.
Add the phy cleanup if dwc3 mode init fail, which is the missing part of
de-init for dwc3 core init.
Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths")
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83bc1560e02e25c6439341352024ebe8488f4fbd upstream.
If we fail to find suitable zones for a new readahead extent, we end up
leaving a stale pointer in the global readahead extents radix tree
(fs_info->reada_tree), which can trigger the following trace later on:
[13367.696354] BUG: kernel NULL pointer dereference, address: 00000000000000b0
[13367.696802] #PF: supervisor read access in kernel mode
[13367.697249] #PF: error_code(0x0000) - not-present page
[13367.697721] PGD 0 P4D 0
[13367.698171] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[13367.698632] CPU: 6 PID: 851214 Comm: btrfs Tainted: G W 5.9.0-rc6-btrfs-next-69 #1
[13367.699100] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[13367.700069] RIP: 0010:__lock_acquire+0x20a/0x3970
[13367.700562] Code: ff 1f 0f b7 c0 48 0f (...)
[13367.701609] RSP: 0018:ffffb14448f57790 EFLAGS: 00010046
[13367.702140] RAX: 0000000000000000 RBX: 29b935140c15e8cf RCX: 0000000000000000
[13367.702698] RDX: 0000000000000002 RSI: ffffffffb3d66bd0 RDI: 0000000000000046
[13367.703240] RBP: ffff8a52ba8ac040 R08: 00000c2866ad9288 R09: 0000000000000001
[13367.703783] R10: 0000000000000001 R11: 00000000b66d9b53 R12: ffff8a52ba8ac9b0
[13367.704330] R13: 0000000000000000 R14: ffff8a532b6333e8 R15: 0000000000000000
[13367.704880] FS: 00007fe1df6b5700(0000) GS:ffff8a5376600000(0000) knlGS:0000000000000000
[13367.705438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[13367.705995] CR2: 00000000000000b0 CR3: 000000022cca8004 CR4: 00000000003706e0
[13367.706565] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[13367.707127] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[13367.707686] Call Trace:
[13367.708246] ? ___slab_alloc+0x395/0x740
[13367.708820] ? reada_add_block+0xae/0xee0 [btrfs]
[13367.709383] lock_acquire+0xb1/0x480
[13367.709955] ? reada_add_block+0xe0/0xee0 [btrfs]
[13367.710537] ? reada_add_block+0xae/0xee0 [btrfs]
[13367.711097] ? rcu_read_lock_sched_held+0x5d/0x90
[13367.711659] ? kmem_cache_alloc_trace+0x8d2/0x990
[13367.712221] ? lock_acquired+0x33b/0x470
[13367.712784] _raw_spin_lock+0x34/0x80
[13367.713356] ? reada_add_block+0xe0/0xee0 [btrfs]
[13367.713966] reada_add_block+0xe0/0xee0 [btrfs]
[13367.714529] ? btrfs_root_node+0x15/0x1f0 [btrfs]
[13367.715077] btrfs_reada_add+0x117/0x170 [btrfs]
[13367.715620] scrub_stripe+0x21e/0x10d0 [btrfs]
[13367.716141] ? kvm_sched_clock_read+0x5/0x10
[13367.716657] ? __lock_acquire+0x41e/0x3970
[13367.717184] ? scrub_chunk+0x60/0x140 [btrfs]
[13367.717697] ? find_held_lock+0x32/0x90
[13367.718254] ? scrub_chunk+0x60/0x140 [btrfs]
[13367.718773] ? lock_acquired+0x33b/0x470
[13367.719278] ? scrub_chunk+0xcd/0x140 [btrfs]
[13367.719786] scrub_chunk+0xcd/0x140 [btrfs]
[13367.720291] scrub_enumerate_chunks+0x270/0x5c0 [btrfs]
[13367.720787] ? finish_wait+0x90/0x90
[13367.721281] btrfs_scrub_dev+0x1ee/0x620 [btrfs]
[13367.721762] ? rcu_read_lock_any_held+0x8e/0xb0
[13367.722235] ? preempt_count_add+0x49/0xa0
[13367.722710] ? __sb_start_write+0x19b/0x290
[13367.723192] btrfs_ioctl+0x7f5/0x36f0 [btrfs]
[13367.723660] ? __fget_files+0x101/0x1d0
[13367.724118] ? find_held_lock+0x32/0x90
[13367.724559] ? __fget_files+0x101/0x1d0
[13367.724982] ? __x64_sys_ioctl+0x83/0xb0
[13367.725399] __x64_sys_ioctl+0x83/0xb0
[13367.725802] do_syscall_64+0x33/0x80
[13367.726188] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[13367.726574] RIP: 0033:0x7fe1df7add87
[13367.726948] Code: 00 00 00 48 8b 05 09 91 (...)
[13367.727763] RSP: 002b:00007fe1df6b4d48 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[13367.728179] RAX: ffffffffffffffda RBX: 000055ce1fb596a0 RCX: 00007fe1df7add87
[13367.728604] RDX: 000055ce1fb596a0 RSI: 00000000c400941b RDI: 0000000000000003
[13367.729021] RBP: 0000000000000000 R08: 00007fe1df6b5700 R09: 0000000000000000
[13367.729431] R10: 00007fe1df6b5700 R11: 0000000000000246 R12: 00007ffd922b07de
[13367.729842] R13: 00007ffd922b07df R14: 00007fe1df6b4e40 R15: 0000000000802000
[13367.730275] Modules linked in: btrfs blake2b_generic xor (...)
[13367.732638] CR2: 00000000000000b0
[13367.733166] ---[ end trace d298b6805556acd9 ]---
What happens is the following:
1) At reada_find_extent() we don't find any existing readahead extent for
the metadata extent starting at logical address X;
2) So we proceed to create a new one. We then call btrfs_map_block() to get
information about which stripes contain extent X;
3) After that we iterate over the stripes and create only one zone for the
readahead extent - only one because reada_find_zone() returned NULL for
all iterations except for one, either because a memory allocation failed
or it couldn't find the block group of the extent (it may have just been
deleted);
4) We then add the new readahead extent to the readahead extents radix
tree at fs_info->reada_tree;
5) Then we iterate over each zone of the new readahead extent, and find
that the device used for that zone no longer exists, because it was
removed or it was the source device of a device replace operation.
Since this left 'have_zone' set to 0, after finishing the loop we jump
to the 'error' label, call kfree() on the new readahead extent and
return without removing it from the radix tree at fs_info->reada_tree;
6) Any future call to reada_find_extent() for the logical address X will
find the stale pointer in the readahead extents radix tree, increment
its reference counter, which can trigger the use-after-free right
away or return it to the caller reada_add_block() that results in the
use-after-free of the example trace above.
So fix this by making sure we delete the readahead extent from the radix
tree if we fail to setup zones for it (when 'have_zone = 0').
Fixes: 319450211842ba ("btrfs: reada: bypass adding extent when all zone failed")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 572c83acdcdafeb04e70aa46be1fa539310be20c upstream.
In fstest btrfs/064 a transaction abort in __btrfs_cow_block could lead
to a system lockup. It gets stuck trying to write back inodes, and the
write back thread was trying to lock an extent buffer:
$ cat /proc/2143497/stack
[<0>] __btrfs_tree_lock+0x108/0x250
[<0>] lock_extent_buffer_for_io+0x35e/0x3a0
[<0>] btree_write_cache_pages+0x15a/0x3b0
[<0>] do_writepages+0x28/0xb0
[<0>] __writeback_single_inode+0x54/0x5c0
[<0>] writeback_sb_inodes+0x1e8/0x510
[<0>] wb_writeback+0xcc/0x440
[<0>] wb_workfn+0xd7/0x650
[<0>] process_one_work+0x236/0x560
[<0>] worker_thread+0x55/0x3c0
[<0>] kthread+0x13a/0x150
[<0>] ret_from_fork+0x1f/0x30
This is because we got an error while COWing a block, specifically here
if (test_bit(BTRFS_ROOT_SHAREABLE, &root->state)) {
ret = btrfs_reloc_cow_block(trans, root, buf, cow);
if (ret) {
btrfs_abort_transaction(trans, ret);
return ret;
}
}
[16402.241552] BTRFS: Transaction aborted (error -2)
[16402.242362] WARNING: CPU: 1 PID: 2563188 at fs/btrfs/ctree.c:1074 __btrfs_cow_block+0x376/0x540
[16402.249469] CPU: 1 PID: 2563188 Comm: fsstress Not tainted 5.9.0-rc6+ #8
[16402.249936] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
[16402.250525] RIP: 0010:__btrfs_cow_block+0x376/0x540
[16402.252417] RSP: 0018:ffff9cca40e578b0 EFLAGS: 00010282
[16402.252787] RAX: 0000000000000025 RBX: 0000000000000002 RCX: ffff9132bbd19388
[16402.253278] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9132bbd19380
[16402.254063] RBP: ffff9132b41a49c0 R08: 0000000000000000 R09: 0000000000000000
[16402.254887] R10: 0000000000000000 R11: ffff91324758b080 R12: ffff91326ef17ce0
[16402.255694] R13: ffff91325fc0f000 R14: ffff91326ef176b0 R15: ffff9132815e2000
[16402.256321] FS: 00007f542c6d7b80(0000) GS:ffff9132bbd00000(0000) knlGS:0000000000000000
[16402.256973] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[16402.257374] CR2: 00007f127b83f250 CR3: 0000000133480002 CR4: 0000000000370ee0
[16402.257867] Call Trace:
[16402.258072] btrfs_cow_block+0x109/0x230
[16402.258356] btrfs_search_slot+0x530/0x9d0
[16402.258655] btrfs_lookup_file_extent+0x37/0x40
[16402.259155] __btrfs_drop_extents+0x13c/0xd60
[16402.259628] ? btrfs_block_rsv_migrate+0x4f/0xb0
[16402.259949] btrfs_replace_file_extents+0x190/0x820
[16402.260873] btrfs_clone+0x9ae/0xc00
[16402.261139] btrfs_extent_same_range+0x66/0x90
[16402.261771] btrfs_remap_file_range+0x353/0x3b1
[16402.262333] vfs_dedupe_file_range_one.part.0+0xd5/0x140
[16402.262821] vfs_dedupe_file_range+0x189/0x220
[16402.263150] do_vfs_ioctl+0x552/0x700
[16402.263662] __x64_sys_ioctl+0x62/0xb0
[16402.264023] do_syscall_64+0x33/0x40
[16402.264364] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[16402.264862] RIP: 0033:0x7f542c7d15cb
[16402.266901] RSP: 002b:00007ffd35944ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[16402.267627] RAX: ffffffffffffffda RBX: 00000000009d1968 RCX: 00007f542c7d15cb
[16402.268298] RDX: 00000000009d2490 RSI: 00000000c0189436 RDI: 0000000000000003
[16402.268958] RBP: 00000000009d2520 R08: 0000000000000036 R09: 00000000009d2e64
[16402.269726] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
[16402.270659] R13: 000000000001f000 R14: 00000000009d1970 R15: 00000000009d2e80
[16402.271498] irq event stamp: 0
[16402.271846] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[16402.272497] hardirqs last disabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0
[16402.273343] softirqs last enabled at (0): [<ffffffff910dbf59>] copy_process+0x6b9/0x1ba0
[16402.273905] softirqs last disabled at (0): [<0000000000000000>] 0x0
[16402.274338] ---[ end trace 737874a5a41a8236 ]---
[16402.274669] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.276179] BTRFS info (device dm-9): forced readonly
[16402.277046] BTRFS: error (device dm-9) in btrfs_replace_file_extents:2723: errno=-2 No such entry
[16402.278744] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.279968] BTRFS: error (device dm-9) in __btrfs_cow_block:1074: errno=-2 No such entry
[16402.280582] BTRFS info (device dm-9): balance: ended with status: -30
The problem here is that as soon as we allocate the new block it is
locked and marked dirty in the btree inode. This means that we could
attempt to writeback this block and need to lock the extent buffer.
However we're not unlocking it here and thus we deadlock.
Fix this by unlocking the cow block if we have any errors inside of
__btrfs_cow_block, and also free it so we do not leak it.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb56f02f26fe23798edb1b2175707419b28c752a upstream.
Logging directories with many entries can take a significant amount of
time, and in some cases monopolize a cpu/core for a long time if the
logging task doesn't happen to block often enough.
Johannes and Lu Fengqi reported test case generic/041 triggering a soft
lockup when the kernel has CONFIG_SOFTLOCKUP_DETECTOR=y. For this test
case we log an inode with 3002 hard links, and because the test removed
one hard link before fsyncing the file, the inode logging causes the
parent directory do be logged as well, which has 6004 directory items to
log (3002 BTRFS_DIR_ITEM_KEY items plus 3002 BTRFS_DIR_INDEX_KEY items),
so it can take a significant amount of time and trigger the soft lockup.
So just make tree-log.c:log_dir_items() reschedule when necessary,
releasing the current search path before doing so and then resume from
where it was before the reschedule.
The stack trace produced when the soft lockup happens is the following:
[10480.277653] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [xfs_io:28172]
[10480.279418] Modules linked in: dm_thin_pool dm_persistent_data (...)
[10480.284915] irq event stamp: 29646366
[10480.285987] hardirqs last enabled at (29646365): [<ffffffff85249b66>] __slab_alloc.constprop.0+0x56/0x60
[10480.288482] hardirqs last disabled at (29646366): [<ffffffff8579b00d>] irqentry_enter+0x1d/0x50
[10480.290856] softirqs last enabled at (4612): [<ffffffff85a00323>] __do_softirq+0x323/0x56c
[10480.293615] softirqs last disabled at (4483): [<ffffffff85800dbf>] asm_call_on_stack+0xf/0x20
[10480.296428] CPU: 2 PID: 28172 Comm: xfs_io Not tainted 5.9.0-rc4-default+ #1248
[10480.298948] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[10480.302455] RIP: 0010:__slab_alloc.constprop.0+0x19/0x60
[10480.304151] Code: 86 e8 31 75 21 00 66 66 2e 0f 1f 84 00 00 00 (...)
[10480.309558] RSP: 0018:ffffadbe09397a58 EFLAGS: 00000282
[10480.311179] RAX: ffff8a495ab92840 RBX: 0000000000000282 RCX: 0000000000000006
[10480.313242] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff85249b66
[10480.315260] RBP: ffff8a497d04b740 R08: 0000000000000001 R09: 0000000000000001
[10480.317229] R10: ffff8a497d044800 R11: ffff8a495ab93c40 R12: 0000000000000000
[10480.319169] R13: 0000000000000000 R14: 0000000000000c40 R15: ffffffffc01daf70
[10480.321104] FS: 00007fa1dc5c0e40(0000) GS:ffff8a497da00000(0000) knlGS:0000000000000000
[10480.323559] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[10480.325235] CR2: 00007fa1dc5befb8 CR3: 0000000004f8a006 CR4: 0000000000170ea0
[10480.327259] Call Trace:
[10480.328286] ? overwrite_item+0x1f0/0x5a0 [btrfs]
[10480.329784] __kmalloc+0x831/0xa20
[10480.331009] ? btrfs_get_32+0xb0/0x1d0 [btrfs]
[10480.332464] overwrite_item+0x1f0/0x5a0 [btrfs]
[10480.333948] log_dir_items+0x2ee/0x570 [btrfs]
[10480.335413] log_directory_changes+0x82/0xd0 [btrfs]
[10480.336926] btrfs_log_inode+0xc9b/0xda0 [btrfs]
[10480.338374] ? init_once+0x20/0x20 [btrfs]
[10480.339711] btrfs_log_inode_parent+0x8d3/0xd10 [btrfs]
[10480.341257] ? dget_parent+0x97/0x2e0
[10480.342480] btrfs_log_dentry_safe+0x3a/0x50 [btrfs]
[10480.343977] btrfs_sync_file+0x24b/0x5e0 [btrfs]
[10480.345381] do_fsync+0x38/0x70
[10480.346483] __x64_sys_fsync+0x10/0x20
[10480.347703] do_syscall_64+0x2d/0x70
[10480.348891] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[10480.350444] RIP: 0033:0x7fa1dc80970b
[10480.351642] Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 (...)
[10480.356952] RSP: 002b:00007fffb3d081d0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[10480.359458] RAX: ffffffffffffffda RBX: 0000562d93d45e40 RCX: 00007fa1dc80970b
[10480.361426] RDX: 0000562d93d44ab0 RSI: 0000562d93d45e60 RDI: 0000000000000003
[10480.363367] RBP: 0000000000000001 R08: 0000000000000000 R09: 00007fa1dc7b2a40
[10480.365317] R10: 0000562d93d0e366 R11: 0000000000000293 R12: 0000000000000001
[10480.367299] R13: 0000562d93d45290 R14: 0000562d93d45e40 R15: 0000562d93d45e60
Link: https://lore.kernel.org/linux-btrfs/20180713090216.GC575@fnst.localdomain/
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
CC: stable@vger.kernel.org # 4.4+
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f4843b172c2c0360ee7792ad98025fae7baefde upstream.
The mptscsih_remove() function triggers a kernel oops if the Scsi_Host
pointer (ioc->sh) is NULL, as can be seen in this syslog:
ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
Begin: Waiting for root file system ...
scsi host2: error handler thread failed to spawn, error = -4
mptspi: ioc0: WARNING - Unable to register controller with SCSI subsystem
Backtrace:
[<000000001045b7cc>] mptspi_probe+0x248/0x3d0 [mptspi]
[<0000000040946470>] pci_device_probe+0x1ac/0x2d8
[<0000000040add668>] really_probe+0x1bc/0x988
[<0000000040ade704>] driver_probe_device+0x160/0x218
[<0000000040adee24>] device_driver_attach+0x160/0x188
[<0000000040adef90>] __driver_attach+0x144/0x320
[<0000000040ad7c78>] bus_for_each_dev+0xd4/0x158
[<0000000040adc138>] driver_attach+0x4c/0x80
[<0000000040adb3ec>] bus_add_driver+0x3e0/0x498
[<0000000040ae0130>] driver_register+0xf4/0x298
[<00000000409450c4>] __pci_register_driver+0x78/0xa8
[<000000000007d248>] mptspi_init+0x18c/0x1c4 [mptspi]
This patch adds the necessary NULL-pointer checks. Successfully tested on
a HP C8000 parisc workstation with buggy SCSI drives.
Link: https://lore.kernel.org/r/20201022090005.GA9000@ls3530.fritz.box
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
