IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream.
The commit c23d92b80e0b ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.
However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.
(FREE from device detaching) | (USE from netdev core)
igb_remove | igb_ndo_get_vf_config
igb_disable_sriov | vf >= adapter->vfs_allocated_count?
kfree(adapter->vf_data) |
adapter->vfs_allocated_count = 0 |
| memcpy(... adapter->vf_data[vf]
Moreover, the igb_disable_sriov() also suffers from data race with the
requests from VF driver.
(FREE from device detaching) | (USE from requests)
igb_remove | igb_msix_other
igb_disable_sriov | igb_msg_task
kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count
adapter->vfs_allocated_count = 0 |
To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce541
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")
Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c23d6b717e4e956376f3852b90f58e262946b50 upstream.
Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove
paths") removed this clk_disable_unprepare()
This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock
handling on remove path") which removed this clk_disable_unprepare()
because:
"
While unloading the dwmac-intel driver, clk_disable_unprepare() is
being called twice in stmmac_dvr_remove() and
intel_eth_pci_remove(). This causes kernel panic on the second call.
"
However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management
for gmac driver") has updated stmmac_dvr_remove() which do not call
clk_disable_unprepare() anymore.
So this call should now be called from intel_eth_pci_remove().
Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream.
When a tx_timeout fires, the PF attempts to recover by incrementally
resetting. First we try a PFR, then CORER and finally a GLOBR. If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.
If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11e551a2efa4481bd4f616ab75374a2710b480e9 upstream.
Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.
Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd8e899cdb5ecaf8e8ee73854a99e10807eef1de upstream.
If an error occurs in dsa_devlink_region_create(), then 'priv->regions'
array will be accessed by negative index '-1'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region")
Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40d21c4565bce064c73a03b79a157a3493c518b9 upstream.
What the driver actually reports as 256-511 is in fact 512-1023, and the
TX packets in the 256-511 bucket are not reported. Fix that.
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36c0d935015766bf20d621c18313f17691bda5e3 upstream.
In the ksz9477_fdb_dump function it reads the ALU control register and
exit from the timeout loop if there is valid entry or search is
complete. After exiting the loop, it reads the alu entry and report to
the user space irrespective of entry is valid. It works till the valid
entry. If the loop exited when search is complete, it reads the alu
table. The table returns all ones and it is reported to user space. So
bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port.
To fix it, after exiting the loop the entry is reported only if it is
valid one.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a12df22a8f68954a4ba48435c06b3d1791c87c4 upstream.
dma_map_single() calls fail in moxart_mac_setup_desc_ring() and
moxart_mac_start_xmit() which leads to an incessant output of this:
[ 16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error
[ 16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error
[ 16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error
Passing pdev to DMA is a common approach among net drivers.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 246bbf2f977ea36aaf41f5d24370fef433250728 upstream.
If the port isn't a CPU port nor a user port, 'cpu_dp'
is a null pointer and a crash happened on dereferencing
it in mv88e6060_setup_port():
[ 9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014
...
[ 9.942216] mv88e6060_setup from dsa_register_switch+0x814/0xe84
[ 9.948616] dsa_register_switch from mdio_probe+0x2c/0x54
[ 9.954433] mdio_probe from really_probe.part.0+0x98/0x2a0
[ 9.960375] really_probe.part.0 from driver_probe_device+0x30/0x10c
[ 9.967029] driver_probe_device from __device_attach_driver+0xb8/0x13c
[ 9.973946] __device_attach_driver from bus_for_each_drv+0x90/0xe0
[ 9.980509] bus_for_each_drv from __device_attach+0x110/0x184
[ 9.986632] __device_attach from bus_probe_device+0x8c/0x94
[ 9.992577] bus_probe_device from deferred_probe_work_func+0x78/0xa8
[ 9.999311] deferred_probe_work_func from process_one_work+0x290/0x73c
[ 10.006292] process_one_work from worker_thread+0x30/0x4b8
[ 10.012155] worker_thread from kthread+0xd4/0x10c
[ 10.017238] kthread from ret_from_fork+0x14/0x3c
Fixes: 0abfd494deef ("net: dsa: use dedicated CPU port")
CC: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220811070939.1717146-1-saproj@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 419831617ed349992c84344dbd9e627f9e68f842 upstream.
iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent
memory for VF mailbox.
Free DMA regions for both ASQ and ARQ in case error happens during
configuration of ASQ/ARQ registers.
Without this change it is possible to see when unloading interface:
74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32]
One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]
Fixes: d358aa9a7a2d ("i40evf: init code and hardware support")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e34f49348f8b7a53205b6f77707a3a6a40cf420b upstream.
We should trace the allocated address instead of page struct.
Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer")
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4ab94d6adaa5cf842b68bd28f4b50bc774496bd upstream.
The current code retrieves the TOS field after the lookup
on the ipv4 routing table. The routing process currently
only allows routing based on the original 3 TOS bits, and
not on the full 6 DSCP bits.
As a result the retrieved TOS is cut to the 3 bits.
However for inheriting purposes the full 6 bits should be used.
Extract the full 6 bits before the route lookup and use
that instead of the cut off 3 TOS bits.
Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ae97cae07e15d41e5c0ebabba64c6eefdeb0bbe upstream.
The port flag isn't set to `NFP_PORT_CHANGED` when using
`ethtool -m DEVNAME` before, so the port state (e.g. interface)
cannot be updated. Therefore, it caused that `ethtool -m DEVNAME`
sometimes cannot read the correct information.
E.g. `ethtool -m DEVNAME` cannot work when load driver before plug
in optical module, as the port interface is still NONE without port
update.
Now update the port state before sending info to NIC to ensure that
port interface is correct (latest state).
Fixes: 61f7c6f44870 ("nfp: implement ethtool get module EEPROM")
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca2bb69514a8bc7f83914122f0d596371352416c upstream.
According to Guillaume Nault RT_TOS should never be used for IPv6.
Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.
But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
Fixes: 3a56f86f1be6 ("geneve: handle ipv6 priority like ipv4 tos")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a542bee27c6a57e45c33cbbdc963325fd6493af upstream.
When we call xdp_convert_buff_to_frame() to get xdpf, if it returns
NULL, we should check if xdp_page was allocated by xdp_linearize_page().
If it is newly allocated, it should be freed here alone. Just like any
other "goto err_xdp".
Fixes: 44fa2dbd4759 ("xdp: transition into using xdp_frame for ndo_xdp_xmit")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ba5e47fb75fbb8fab45f5c1bc8d5c33d8834bd3 upstream.
The final update statement of the for loop exceeds the array range, the
dereference of self->aq_vec[i] is not checked and then leads to the
index out of range error.
Also fixed this kind of coding style in other for loop.
[ 97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48
[ 97.937607] index 8 is out of range for type 'aq_vec_s *[8]'
[ 97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2
[ 97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022
[ 97.937611] Workqueue: events_unbound async_run_entry_fn
[ 97.937616] Call Trace:
[ 97.937617] <TASK>
[ 97.937619] dump_stack_lvl+0x49/0x63
[ 97.937624] dump_stack+0x10/0x16
[ 97.937626] ubsan_epilogue+0x9/0x3f
[ 97.937627] __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 97.937629] ? __scm_send+0x348/0x440
[ 97.937632] ? aq_vec_stop+0x72/0x80 [atlantic]
[ 97.937639] aq_nic_stop+0x1b6/0x1c0 [atlantic]
[ 97.937644] aq_suspend_common+0x88/0x90 [atlantic]
[ 97.937648] aq_pm_suspend_poweroff+0xe/0x20 [atlantic]
[ 97.937653] pci_pm_suspend+0x7e/0x1a0
[ 97.937655] ? pci_pm_suspend_noirq+0x2b0/0x2b0
[ 97.937657] dpm_run_callback+0x54/0x190
[ 97.937660] __device_suspend+0x14c/0x4d0
[ 97.937661] async_suspend+0x23/0x70
[ 97.937663] async_run_entry_fn+0x33/0x120
[ 97.937664] process_one_work+0x21f/0x3f0
[ 97.937666] worker_thread+0x4a/0x3c0
[ 97.937668] ? process_one_work+0x3f0/0x3f0
[ 97.937669] kthread+0xf0/0x120
[ 97.937671] ? kthread_complete_and_exit+0x20/0x20
[ 97.937672] ret_from_fork+0x22/0x30
[ 97.937676] </TASK>
v2. fixed "warning: variable 'aq_vec' set but not used"
v3. simplified a for loop
Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Link: https://lore.kernel.org/r/20220808081845.42005-1-acelan.kao@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d80d60b0db6ff3dd2e29247cc2a5166d7e9ae37e upstream.
The mcp251x driver uses both receiving mailboxes of the CAN controller
chips. For retrieving the CAN frames from the controller via SPI, it checks
once per interrupt which mailboxes have been filled and will retrieve the
messages accordingly.
This introduces a race condition, as another CAN frame can enter mailbox 1
while mailbox 0 is emptied. If now another CAN frame enters mailbox 0 until
the interrupt handler is called next, mailbox 0 is emptied before
mailbox 1, leading to out-of-order CAN frames in the network device.
This is fixed by checking the interrupt flags once again after freeing
mailbox 0, to correctly also empty mailbox 1 before leaving the handler.
For reproducing the bug I created the following setup:
- Two CAN devices, one Raspberry Pi with MCP2515, the other can be any.
- Setup CAN to 1 MHz
- Spam bursts of 5 CAN-messages with increasing CAN-ids
- Continue sending the bursts while sleeping a second between the bursts
- Check on the RPi whether the received messages have increasing CAN-ids
- Without this patch, every burst of messages will contain a flipped pair
v3: https://lore.kernel.org/all/20220804075914.67569-1-sebastian.wuerl@ororatech.com
v2: https://lore.kernel.org/all/20220804064803.63157-1-sebastian.wuerl@ororatech.com
v1: https://lore.kernel.org/all/20220803153300.58732-1-sebastian.wuerl@ororatech.com
Fixes: bf66f3736a94 ("can: mcp251x: Move to threaded interrupts instead of workqueues.")
Signed-off-by: Sebastian Würl <sebastian.wuerl@ororatech.com>
Link: https://lore.kernel.org/all/20220804081411.68567-1-sebastian.wuerl@ororatech.com
[mkl: reduce scope of intf1, eflag1]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4cb6e62ea4d36e53fb3c0f18ea4503d7b76674f upstream.
clang emits a -Wunaligned-access warning on struct __packed
ems_cpc_msg.
The reason is that the anonymous union msg (not declared as packed) is
being packed right after some non naturally aligned variables (3*8
bits + 2*32) inside a packed struct:
| struct __packed ems_cpc_msg {
| u8 type; /* type of message */
| u8 length; /* length of data within union 'msg' */
| u8 msgid; /* confirmation handle */
| __le32 ts_sec; /* timestamp in seconds */
| __le32 ts_nsec; /* timestamp in nano seconds */
| /* ^ not naturally aligned */
|
| union {
| /* ^ not declared as packed */
| u8 generic[64];
| struct cpc_can_msg can_msg;
| struct cpc_can_params can_params;
| struct cpc_confirm confirmation;
| struct cpc_overrun overrun;
| struct cpc_can_error error;
| struct cpc_can_err_counter err_counter;
| u8 can_state;
| } msg;
| };
Starting from LLVM 14, having an unpacked struct nested in a packed
struct triggers a warning. c.f. [1].
Fix the warning by marking the anonymous union as packed.
[1] https://github.com/llvm/llvm-project/issues/55520
Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/all/20220802094021.959858-1-mkl@pengutronix.de
Cc: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com>
Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fd2c17fb6e02a8c0ab51df1cfec82ce96b8e83d upstream.
This reverts commit 36a15e1cb134c0395261ba1940762703f778438c.
The usage of FLAG_SEND_ZLP causes problems to other firmware/hardware
versions that have no issues.
The FLAG_SEND_ZLP is not safe to use in this context.
See:
https://patchwork.ozlabs.org/project/netdev/patch/1270599787.8900.8.camel@Linuxdev4-laptop/#118378
The original problem needs another way to solve.
Fixes: 36a15e1cb134 ("net: usb: ax88179_178a needs FLAG_SEND_ZLP")
Cc: stable@vger.kernel.org
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216327
Link: https://bugs.archlinux.org/task/75491
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f8954e099b8ae96e7de1bb95950e00c85bedd40 upstream.
This reverts commit a52ed4866d2b90dd5e4ae9dabd453f3ed8fa3cbc as it
causes build problems in linux-next. It needs to be reintroduced in a
way that can allow the api to evolve and not require a "flag day" to
catch all users.
Link: https://lore.kernel.org/r/20220623160723.7a44b573@canb.auug.org.au
Cc: Duoming Zhou <duoming@zju.edu.cn>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8960f878e39fadc03d74292a6731f1e914cf2019 ]
When a PHY interrupt is signaled, the SMSC LAN95xx driver updates the
MAC full duplex mode and PHY flow control registers based on cached data
in struct phy_device:
smsc95xx_status() # raises EVENT_LINK_RESET
usbnet_deferred_kevent()
smsc95xx_link_reset() # uses cached data in phydev
Simultaneously, phylib polls link status once per second and updates
that cached data:
phy_state_machine()
phy_check_link_status()
phy_read_status()
lan87xx_read_status()
genphy_read_status() # updates cached data in phydev
If smsc95xx_link_reset() wins the race against genphy_read_status(),
the registers may be updated based on stale data.
E.g. if the link was previously down, phydev->duplex is set to
DUPLEX_UNKNOWN and that's what smsc95xx_link_reset() will use, even
though genphy_read_status() may update it to DUPLEX_FULL afterwards.
PHY interrupts are currently only enabled on suspend to trigger wakeup,
so the impact of the race is limited, but we're about to enable them
perpetually.
Avoid the race by delaying execution of smsc95xx_link_reset() until
phy_state_machine() has done its job and calls back via
smsc95xx_handle_link_change().
Signaling EVENT_LINK_RESET on wakeup is not necessary because phylib
picks up link status changes through polling. So drop the declaration
of a ->link_reset() callback.
Note that the semicolon on a line by itself added in smsc95xx_status()
is a placeholder for a function call which will be added in a subsequent
commit. That function call will actually handle the INT_ENP_PHY_INT_
interrupt.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3108871f19221372b251f7da1ac38736928b5b3a ]
Upon receiving data from the Interrupt Endpoint, the SMSC LAN95xx driver
attempts to clear the signaled interrupts by writing "all ones" to the
Interrupt Status Register.
However the driver only ever enables a single type of interrupt, namely
the PHY Interrupt. And according to page 119 of the LAN950x datasheet,
its bit in the Interrupt Status Register is read-only. There's no other
way to clear it than in a separate PHY register:
https://www.microchip.com/content/dam/mchp/documents/UNG/ProductDocuments/DataSheets/LAN950x-Data-Sheet-DS00001875D.pdf
Consequently, writing "all ones" to the Interrupt Status Register is
pointless and can be dropped.
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # LAN9514/9512/9500
Tested-by: Ferry Toth <fntoth@gmail.com> # LAN9514
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a52ed4866d2b90dd5e4ae9dabd453f3ed8fa3cbc ]
There are sleep in atomic context bugs when uploading device dump
data in mwifiex. The root cause is that dev_coredumpv could not
be used in atomic contexts, because it calls dev_set_name which
include operations that may sleep. The call tree shows execution
paths that could lead to bugs:
(Interrupt context)
fw_dump_timer_fn
mwifiex_upload_device_dump
dev_coredumpv(..., GFP_KERNEL)
dev_coredumpm()
kzalloc(sizeof(*devcd), gfp); //may sleep
dev_set_name
kobject_set_name_vargs
kvasprintf_const(GFP_KERNEL, ...); //may sleep
kstrdup(s, GFP_KERNEL); //may sleep
The corresponding fail log is shown below:
[ 135.275938] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.281029] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
...
[ 135.293613] Call Trace:
[ 135.293613] <IRQ>
[ 135.293613] dump_stack_lvl+0x57/0x7d
[ 135.293613] __might_resched.cold+0x138/0x173
[ 135.293613] ? dev_coredumpm+0xca/0x2e0
[ 135.293613] kmem_cache_alloc_trace+0x189/0x1f0
[ 135.293613] ? devcd_match_failing+0x30/0x30
[ 135.293613] dev_coredumpm+0xca/0x2e0
[ 135.293613] ? devcd_freev+0x10/0x10
[ 135.293613] dev_coredumpv+0x1c/0x20
[ 135.293613] ? devcd_match_failing+0x30/0x30
[ 135.293613] mwifiex_upload_device_dump+0x65/0xb0
[ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0
[ 135.293613] call_timer_fn+0x122/0x3d0
[ 135.293613] ? msleep_interruptible+0xb0/0xb0
[ 135.293613] ? lock_downgrade+0x3c0/0x3c0
[ 135.293613] ? __next_timer_interrupt+0x13c/0x160
[ 135.293613] ? lockdep_hardirqs_on_prepare+0xe/0x220
[ 135.293613] ? mwifiex_dnld_fw+0x1b0/0x1b0
[ 135.293613] __run_timers.part.0+0x3f8/0x540
[ 135.293613] ? call_timer_fn+0x3d0/0x3d0
[ 135.293613] ? arch_restore_msi_irqs+0x10/0x10
[ 135.293613] ? lapic_next_event+0x31/0x40
[ 135.293613] run_timer_softirq+0x4f/0xb0
[ 135.293613] __do_softirq+0x1c2/0x651
...
[ 135.293613] RIP: 0010:default_idle+0xb/0x10
[ 135.293613] RSP: 0018:ffff888006317e68 EFLAGS: 00000246
[ 135.293613] RAX: ffffffff82ad8d10 RBX: ffff888006301cc0 RCX: ffffffff82ac90e1
[ 135.293613] RDX: ffffed100d9ff1b4 RSI: ffffffff831ad140 RDI: ffffffff82ad8f20
[ 135.293613] RBP: 0000000000000003 R08: 0000000000000000 R09: ffff88806cff8d9b
[ 135.293613] R10: ffffed100d9ff1b3 R11: 0000000000000001 R12: ffffffff84593410
[ 135.293613] R13: 0000000000000000 R14: 0000000000000000 R15: 1ffff11000c62fd2
...
[ 135.389205] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
This patch uses delayed work to replace timer and moves the operations
that may sleep into a delayed work in order to mitigate bugs, it was
tested on Marvell 88W8801 chip whose port is usb and the firmware is
usb8801_uapsta.bin. The following is the result after using delayed
work to replace timer.
[ 134.936453] usb 1-1: == mwifiex dump information to /sys/class/devcoredump start
[ 135.043344] usb 1-1: == mwifiex dump information to /sys/class/devcoredump end
As we can see, there is no bug now.
Fixes: f5ecd02a8b20 ("mwifiex: device dump support for usb interface")
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/b63b77fc84ed3e8a6bef02378e17c7c71a0bc3be.1654569290.git.duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84d94e16efa268e4f2887d858cd67ee37b870f25 ]
The firmware of the 88W8897 PCIe+USB card sends those events very
unreliably, sometimes bluetooth together with 2.4ghz-wifi is used and no
COEX event comes in, and sometimes bluetooth is disabled but the
coexistance mode doesn't get disabled.
This means we sometimes end up capping the rx/tx window size while
bluetooth is not enabled anymore, artifically limiting wifi speeds even
though bluetooth is not being used.
Since we can't fix the firmware, let's just ignore those events on the
88W8897 device. From some Wireshark capture sessions it seems that the
Windows driver also doesn't change the rx/tx window sizes when bluetooth
gets enabled or disabled, so this is fairly consistent with the Windows
driver.
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211103205827.14559-1-verdre@v0yd.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31b14d86dfe7174361e8c6e5df6c2c3a4d5918c ]
In case push_rcu() and related functions are buggy, there's a
WARN_ON(len >= 128), which the selftest tries to hit by being tricky. In
case it is hit, we shouldn't corrupt the kernel's stack, though;
otherwise it may be hard to even receive the report that it's buggy. So
conditionalize the stack write based on that WARN_ON()'s return value.
Note that this never *actually* happens anyway. The WARN_ON() in the
first place is bounded by IS_ENABLED(DEBUG), and isn't expected to ever
actually hit. This is just a debugging sanity check.
Additionally, hoist the constant 128 into a named enum,
MAX_ALLOWEDIPS_BITS, so that it's clear why this value is chosen.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/all/CAHk-=wjJZGA6w_DxA+k7Ejbqsq+uGK==koPai3sqdsfJqemvag@mail.gmail.com/
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 151c8e499f4705010780189377f85b57400ccbf5 ]
Using msleep() is problematic because it's compared against
ratelimiter.c's ktime_get_coarse_boottime_ns(), which means on systems
with slow jiffies (such as UML's forced HZ=100), the result is
inaccurate. So switch to using schedule_hrtimeout().
However, hrtimer gives us access only to the traditional posix timers,
and none of the _COARSE variants. So now, rather than being too
imprecise like jiffies, it's too precise.
One solution would be to give it a large "range" value, but this will
still fire early on a loaded system. A better solution is to align the
timeout to the actual coarse timer, and then round up to the nearest
tick, plus change.
So add the timeout to the current coarse time, and then
schedule_hrtimer() until the absolute computed time.
This should hopefully reduce flakes in CI as well. Note that we keep the
retry loop in case the entire function is running behind, because the
test could still be scheduled out, by either the kernel or by the
hypervisor's kernel, in which case restarting the test and hoping to not
be scheduled out still helps.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a86e86db5e6d72c82724a63ca1c5293409a21518 ]
The prototype of input features of ionic_set_nic_features() is
netdev_features_t, but the vlan_flags is using the private
definition of ionic drivers. It should use the variable
ctx.cmd.lif_setattr.features, rather than features to check
the vlan flags. So fixes it.
Fixes: beead698b173 ("ionic: Add the basic NDO callbacks for netdev support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0b80a9edb1a029ff913e81b47540e57ad034329 ]
We need to suppress warnings from sily map sizes. Also switch
from GFP_USER to GFP_KERNEL_ACCOUNT, I'm pretty sure I misunderstood
the flags when writing this code.
Fixes: 395cacb5f1a0 ("netdevsim: bpf: support fake map offload")
Reported-by: syzbot+ad24705d3fd6463b18c6@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220726213605.154204-1-kuba@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec60d54cb9a3d43a02c5612a03093c18233e6601 ]
Fix max_rate option in TC, check for proper quanta boundaries.
Check for minimum value provided and if it fits expected 50Mbps
quanta.
Without this patch, iavf could send settings for max_rate limiting
that would be accepted from by PF even the max_rate option is less
than expected 50Mbps quanta. It results in no rate limiting
on traffic as rate limiting will be floored to 0.
Example:
tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \
2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \
max_rate 50Mbps 500Mbps 500Mbps
Should limit TC0 to circa 50 Mbps
tc qdisc add dev $vf root mqprio num_tc 3 map 0 2 1 queues \
2@0 2@2 2@4 hw 1 mode channel shaper bw_rlimit \
max_rate 0Mbps 100Kbit 500Mbps
Should return error
Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 562696c3c62c7c23dd896e9447252ce9268cb812 ]
MLX5E_MAX_RQ_NUM_MTTS should be the maximum value, so that
MLX5_MTT_OCTW(MLX5E_MAX_RQ_NUM_MTTS) fits into u16. The current value of
1 << 17 results in MLX5_MTT_OCTW(1 << 17) = 1 << 16, which doesn't fit
into u16. This commit replaces it with the maximum value that still
fits u16.
Fixes: 73281b78a37a ("net/mlx5e: Derive Striding RQ size from MTU")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 115d9f95ea7ab780ef315dc356bebba2e07cb731 ]
The driver reports whether TX/RX TLS device offloads are supported, but
not which ciphers/versions, these should be handled by returning
-EOPNOTSUPP when .tls_dev_add() is called.
Remove the WARN_ON kernel trace when the driver gets a request to
offload a cipher/version that is not supported as it is expected.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fd57e1d120bf13d4dc6c200a7cf914e6347a316 ]
usb_get_dev will be called before lbs_get_firmware_async which means that
usb_put_dev need to be called when lbs_get_firmware_async fails.
Fixes: ce84bb69f50e ("libertas USB: convert to asynchronous firmware loading")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220620092350.39960-1-hbh25y@gmail.com
Link: https://lore.kernel.org/r/20220622113402.16969-1-colin.i.king@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d578e0af3a003736f6c440188b156483d451b329 ]
Commit 7a4836560a61 changes simple_write_to_buffer() with memdup_user()
but it forgets to change the value to be returned that came from
simple_write_to_buffer() call. It results in the following warning:
warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
return rc;
^~
Remove rc variable and just return the passed in length if the
memdup_user() succeeds.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7a4836560a6198d245d5732e26f94898b12eb760 ("wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()")
Fixes: ff974e4083341383d3dd4079e52ed30f57f376f0 ("wil6210: debugfs interface to send raw WMI command")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220724202452.61846-1-ammar.faizi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9950f11211331180269867aef848c7cf56861742 ]
After commit 3a5c7e4611dd, the variable errc is accessed before being
initialized, c.f. below W=2 warning:
| In function 'pch_can_error',
| inlined from 'pch_can_poll' at drivers/net/can/pch_can.c:739:4:
| drivers/net/can/pch_can.c:501:29: warning: 'errc' may be used uninitialized [-Wmaybe-uninitialized]
| 501 | cf->data[6] = errc & PCH_TEC;
| | ^
| drivers/net/can/pch_can.c: In function 'pch_can_poll':
| drivers/net/can/pch_can.c:484:13: note: 'errc' was declared here
| 484 | u32 errc, lec;
| | ^~~~
Moving errc initialization up solves this issue.
Fixes: 3a5c7e4611dd ("can: pch_can: do not report txerr and rxerr during bus-off")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/20220721160032.9348-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aebe8a2433cd090ccdc222861f44bddb75eb01de ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220719143550.3681-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a57732084e06791d37ea1ea447cca46220737abd ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 7259124eac7d1 ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c")
Link: https://lore.kernel.org/all/20220719143550.3681-9-mailhol.vincent@wanadoo.fr
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 936e90595376e64b6247c72d3ea8b8b164b7ac96 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Link: https://lore.kernel.org/all/20220719143550.3681-8-mailhol.vincent@wanadoo.fr
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ac15a8f661b941519379831d09bfb12271b23ee ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Link: https://lore.kernel.org/all/20220719143550.3681-7-mailhol.vincent@wanadoo.fr
CC: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a22bd630cfff496b270211745536e50e98eb3a45 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Link: https://lore.kernel.org/all/20220719143550.3681-6-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 164d7cb2d5a30f1b3a5ab4fab1a27731fb1494a8 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 215db1856e83 ("can: sja1000: Consolidate and unify state change handling")
Link: https://lore.kernel.org/all/20220719143550.3681-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a37b7245e831a641df360ca41db6a71c023d3746 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver")
Link: https://lore.kernel.org/all/20220719143550.3681-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a5c7e4611ddcf0ef37a3a17296b964d986161a6 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 0c78ab76a05c ("pch_can: Add setting TEC/REC statistics processing")
Link: https://lore.kernel.org/all/20220719143550.3681-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcfd9d7f6840b06d5988c7141127795cf405805e ]
The assignment of the value to the variable total in the loop
condition must be enclosed in additional parentheses, since otherwise,
in accordance with the precedence of the operators, the conjunction
will be performed first, and only then the assignment.
Due to this error, a warning later in the function after the loop may
not occur in the situation when it should.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 0d4171e2153b ("p54: implement flush callback")
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220714134831.106004-1-subkhankulov@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83781f0162d080fec7dcb911afd1bc2f5ad04471 ]
If an error occurs after a successful call to p54spi_request_firmware(), it
must be undone by a corresponding release_firmware() as already done in
the error handling path of p54spi_request_firmware() and in the .remove()
function.
Add the missing call in the error handling path and remove it from
p54spi_request_firmware() now that it is the responsibility of the caller
to release the firmware
Fixes: cd8d3d321285 ("p54spi: p54spi driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/297d2547ff2ee627731662abceeab9dbdaf23231.1655068321.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a4836560a6198d245d5732e26f94898b12eb760 ]
The simple_write_to_buffer() function will succeed if even a single
byte is initialized. However, we need to initialize the whole buffer
to prevent information leaks. Just use memdup_user().
Fixes: ff974e408334 ("wil6210: debugfs interface to send raw WMI command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/Ysg14NdKAZF/hcNG@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a14c1d0113f121151edf34333cdf212dd209190 ]
We should use of_node_put() for the reference 'np' returned by
of_get_child_by_name() which will increase the refcount.
Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
