IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit db46e3a88a09c5cf7e505664d01da7238cd56c92 ]
In an incredibly strange API design decision, qdisc->destroy() gets
called even if qdisc->init() never succeeded, not exclusively since
commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"),
but apparently also earlier (in the case of qdisc_create_dflt()).
The taprio qdisc does not fully acknowledge this when it attempts full
offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in
taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS
parsed from netlink (in taprio_change(), tail called from taprio_init()).
But in taprio_destroy(), we call taprio_disable_offload(), and this
determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags).
But looking at the implementation of FULL_OFFLOAD_IS_ENABLED()
(a bitwise check of bit 1 in q->flags), it is invalid to call this macro
on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set
to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on
an invalid set of flags.
As a result, it is possible to crash the kernel if user space forces an
error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling
of taprio_enable_offload(). This is because drivers do not expect the
offload to be disabled when it was never enabled.
The error that we force here is to attach taprio as a non-root qdisc,
but instead as child of an mqprio root qdisc:
$ tc qdisc add dev swp0 root handle 1: \
mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
$ tc qdisc replace dev swp0 parent 1:1 \
taprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \
sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
Unable to handle kernel paging request at virtual address fffffffffffffff8
[fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Call trace:
taprio_dump+0x27c/0x310
vsc9959_port_setup_tc+0x1f4/0x460
felix_port_setup_tc+0x24/0x3c
dsa_slave_setup_tc+0x54/0x27c
taprio_disable_offload.isra.0+0x58/0xe0
taprio_destroy+0x80/0x104
qdisc_create+0x240/0x470
tc_modify_qdisc+0x1fc/0x6b0
rtnetlink_rcv_msg+0x12c/0x390
netlink_rcv_skb+0x5c/0x130
rtnetlink_rcv+0x1c/0x2c
Fix this by keeping track of the operations we made, and undo the
offload only if we actually did it.
I've added "bool offloaded" inside a 4 byte hole between "int clockid"
and "atomic64_t picos_per_byte". Now the first cache line looks like
below:
$ pahole -C taprio_sched net/sched/sch_taprio.o
struct taprio_sched {
struct Qdisc * * qdiscs; /* 0 8 */
struct Qdisc * root; /* 8 8 */
u32 flags; /* 16 4 */
enum tk_offsets tk_offset; /* 20 4 */
int clockid; /* 24 4 */
bool offloaded; /* 28 1 */
/* XXX 3 bytes hole, try to pack */
atomic64_t picos_per_byte; /* 32 0 */
/* XXX 8 bytes hole, try to pack */
spinlock_t current_entry_lock; /* 40 0 */
/* XXX 8 bytes hole, try to pack */
struct sched_entry * current_entry; /* 48 8 */
struct sched_gate_list * oper_sched; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0e99d03778b2418aec20db99d97d19d25d198b6 ]
Since dynamic registration of the gifconf() helper is only used for
IPv4, and this can not be in a loadable module, this can be simplified
noticeably by turning it into a direct function call as a preparation
for cleaning up the compat handling.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5641c751fe2f ("net: enetc: deny offload of tc-based TSN features on VF interfaces")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fed38e64d9b99d65a36c0dbadc3d3f8ddd9ea030 ]
The VF netdev driver shouldn't respond to changes in the NETIF_F_HW_TC
flag; only PFs should. Moreover, TSN-specific code should go to
enetc_qos.c, which should not be included in the VF driver.
Fixes: 79e499829f3f ("net: enetc: add hw tc hw offload features for PSPF capability")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220916133209.3351399-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26c013108c12b94bc023bf19198a4300596c98b1 ]
Doing a variable-sized memcpy is slower, and the compiler isn't smart
enough to turn this into a constant-size assignment.
Further, Kees' latest fortified memcpy will actually bark, because the
destination pointer is type sockaddr, not explicitly sockaddr_in or
sockaddr_in6, so it thinks there's an overflow:
memcpy: detected field-spanning write (size 28) of single field
"&endpoint.addr" at drivers/net/wireguard/netlink.c:446 (size 16)
Fix this by just assigning by using explicit casts for each checked
case.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reported-by: syzbot+a448cda4dba2dac50de5@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 684dec3cf45da2b0848298efae4adf3b2aeafeda ]
A previous commit tried to make the ratelimiter timings test more
reliable but in the process made it less reliable on other
configurations. This is an impossible problem to solve without
increasingly ridiculous heuristics. And it's not even a problem that
actually needs to be solved in any comprehensive way, since this is only
ever used during development. So just cordon this off with a DEBUG_
ifdef, just like we do for the trie's randomized tests, so it can be
enabled while hacking on the code, and otherwise disabled in CI. In the
process we also revert 151c8e499f47.
Fixes: 151c8e499f47 ("wireguard: ratelimiter: use hrtimer in selftest")
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf412ec333250cb82bafe57169204e14a9f1c2ac ]
IPA can route packets between IPA-connected entities. The AP and
modem are currently the only such entities supported, and no routing
is required to transfer packets between them.
The number of entries in each routing table is fixed, and defined at
initialization time. Some of these entries are designated for use
by the modem, and the rest are available for the AP to use. The AP
sends a QMI message to the modem which describes (among other
things) information about routing table memory available for the
modem to use.
Currently the QMI initialization packet gives wrong information in
its description of routing tables. What *should* be supplied is the
maximum index that the modem can use for the routing table memory
located at a given location. The current code instead supplies the
total *number* of routing table entries. Furthermore, the modem is
granted the entire table, not just the subset it's supposed to use.
This patch fixes this. First, the ipa_mem_bounds structure is
generalized so its "end" field can be interpreted either as a final
byte offset, or a final array index. Second, the IPv4 and IPv6
(non-hashed and hashed) table information fields in the QMI
ipa_init_modem_driver_req structure are changed to be ipa_mem_bounds
rather than ipa_mem_array structures. Third, we set the "end" value
for each routing table to be the last index, rather than setting the
"count" to be the number of indices. Finally, instead of allowing
the modem to use all of a routing table's memory, it is limited to
just the portion meant to be used by the modem. In all versions of
IPA currently supported, that is IPA_ROUTE_MODEM_COUNT (8) entries.
Update a few comments for clarity.
Fixes: 530f9216a9537 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220913204602.1803004-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ea29143ebe6c453f5fddc80ffe4ed046f44aa3a ]
Entries in an IPA route or filter table are 64-bit little-endian
addresses, each of which refers to a routing or filtering rule.
The format of these table slots are fixed, but IPA_TABLE_ENTRY_SIZE
is used to define their size. This symbol doesn't really add value,
and I think it unnecessarily obscures what a table entry *is*.
So get rid of IPA_TABLE_ENTRY_SIZE, and just use sizeof(__le64) in
its place throughout the code.
Update the comments in "ipa_table.c" to provide a little better
explanation of these table slots.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19aaf72c0c7a26ab7ffc655a6d84da6a379f899b ]
A recent patch avoided doing 64-bit modulo operations by checking
the alignment of some DMA allocations using only the lower 32 bits
of the address.
David Laight pointed out (after the fix was committed) that DMA
allocations might already satisfy the alignment requirements. And
he was right.
Remove the alignment checks that occur after DMA allocation requests,
and update comments to explain why the constraint is satisfied. The
only place IPA_TABLE_ALIGN was used was to check the alignment; it is
therefore no longer needed, so get rid of it.
Add comments where GSI_RING_ELEMENT_SIZE and the tre_count and
event_count channel data fields are defined to make explicit they
are required to be powers of 2.
Revise a comment in gsi_trans_pool_init_dma(), taking into account
that dma_alloc_coherent() guarantees its result is aligned to a page
size (or order thereof).
Don't bother printing an error if a DMA allocation fails.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 437c78f976f5b39fc4b2a1c65903a229f55912dd ]
It is possible for a 32 bit x86 build to use a 64 bit DMA address.
There are two remaining spots where the IPA driver does a modulo
operation to check alignment of a DMA address, and under certain
conditions this can lead to a build error on i386 (at least).
The alignment checks we're doing are for power-of-2 values, and this
means the lower 32 bits of the DMA address can be used. This ensures
both operands to the modulo operator are 32 bits wide.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5d4e96b44cf20330c970c3e30ea0a8c3a23feca ]
We currently have a build-time check to ensure that the minimum DMA
allocation alignment satisfies the constraint that IPA filter and
route tables must point to rules that are 128-byte aligned.
But what's really important is that the actual allocated DMA memory
has that alignment, even if the minimum is smaller than that.
Remove the BUILD_BUG_ON() call checking against minimim DMA alignment
and instead verify at rutime that the allocated memory is properly
aligned.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2fd2311de909a7f4e99b4bd11a19e6b671d6a6b ]
Some build time checks in ipa_table_validate_build() assume that a
DMA address is 64 bits wide. That is more restrictive than it has
to be. A route or filter table is 64 bits wide no matter what the
size of a DMA address is on the AP. The code actually uses a
pointer to __le64 to access table entries, and a fixed constant
IPA_TABLE_ENTRY_SIZE to describe the size of those entries.
Loosen up two checks so they still verify some requirements, but
such that they do not assume the size of a DMA address is 64 bits.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: cf412ec33325 ("net: ipa: properly limit modem routing table use")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c48709e6d9d353acaaac1d8e33474756b121d78 ]
In of_mdiobus_register(), we should call of_node_put() for 'child'
escaped out of for_each_available_child_of_node().
Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral")
Co-developed-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220913125659.3331969-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8a79c03054911c375a2252627a429c9bc4615b6 ]
The Kconfig symbol depended on MMU but was dropped by the commit
acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu")
because it already had as a dependency ARM64 that already selects MMU.
But later, commit a0f25a6bb319 ("drm/hisilicon/hibmc: Allow to be built
if COMPILE_TEST is enabled") allowed the driver to be built for non-ARM64
when COMPILE_TEST is set but that could lead to unmet direct dependencies
and linking errors.
Prevent a kconfig warning when MMU is not enabled by making
DRM_HISI_HIBMC depend on MMU.
WARNING: unmet direct dependencies detected for DRM_TTM
Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && MMU [=n]
Selected by [m]:
- DRM_TTM_HELPER [=m] && HAS_IOMEM [=y] && DRM [=m]
- DRM_HISI_HIBMC [=m] && HAS_IOMEM [=y] && DRM [=m] && PCI [=y] && (ARM64 || COMPILE_TEST [=y])
Fixes: acad3fe650a5 ("drm/hisilicon: Removed the dependency on the mmu")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: John Stultz <jstultz@google.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531025557.29593-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0f25a6bb319aa05e04dcf51707c97c2881b4f47 ]
The commit feeb07d0ca5a ("drm/hisilicon/hibmc: Make CONFIG_DRM_HISI_HIBMC
depend on ARM64") made the driver Kconfig symbol to depend on ARM64 since
it only supports that architecture and loading the module on others would
lead to incorrect video modes being used.
But it also prevented the driver to be built on other architectures which
is useful to have compile test coverage when doing subsystem wide changes.
Make the dependency instead to be (ARM64 || COMPILE_TEST), so the driver
is buildable when the CONFIG_COMPILE_TEST option is enabled.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211216210936.3329977-1-javierm@redhat.com
Stable-dep-of: d8a79c030549 ("drm/hisilicon: Add depends on MMU")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a242eb2913a4aa3d6fbdb86559f27628e9466f3 ]
Trying to get the channel from the tx_queue variable here is wrong
because we can only be here if tx_queue is NULL, so we shouldn't
dereference it. As the above comment in the code says, this is very
unlikely to happen, but it's wrong anyway so let's fix it.
I hit this issue because of a different bug that caused tx_queue to be
NULL. If that happens, this is the error message that we get here:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
Fixes: 12804793b17c ("sfc: decouple TXQ type from label")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914111135.21038-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f232af4295653afa4ade3230462b3be15ad16419 ]
In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but
that's not correct if efx_sepparate_tx_channels is false. In that case,
the offset is 0 because the tx queues are in the single existing channel
at index 0, together with the rx queue.
Without this fix, as soon as you try to send any traffic, it tries to
get the tx queues from an uninitialized channel getting these errors:
WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
Fixes: c308dfd1b43e ("sfc: fix wrong tx channel offset with efx_separate_tx_channels")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914103648.16902-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 198eb7e1b81d8ba676d0f4f120c092032ae69a8e ]
While converting max_tx_rate from bytes to Mbps, this value was set to 0,
if the original value was lower than 125000 bytes (1 Mbps). This would
cause no transmission rate limiting to occur. This happened due to lack of
check of max_tx_rate against the 1 Mbps value for max_tx_rate and the
following division by 125000. Fix this issue by adding a helper
i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of
50 Mbps, if its value is less than 1 Mbps, otherwise do the required
conversion by dividing by 125000.
Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 372539def2824c43b6afe2403045b140f65c5acc ]
Max MTU sent to VF is set to 0 during memory allocation. It cause
that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not
depend on data from HW.
Set max_mtu field in virtchnl_vf_resource struct to inform
VF in GET_VF_RESOURCES msg what size should be max frame.
Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 399c98c4dc50b7eb7e9f24da7ffdda6f025676ef ]
After setting port VLAN and MTU to 9000 on VF with ice driver there
was an iavf error
"PF returned error -5 (IAVF_ERR_PARAM) to our request 6".
During queue configuration, VF's max packet size was set to
IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN
due to making some space for port VLAN as VF is not aware whether it's
in a port VLAN. This mismatch in sizes caused ice to reject queue
configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF
to VF with GET_VF_RESOURCES msg but VF does not look at this.
In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu
received from pf with GET_VF_RESOURCES msg to make vf's
max_frame_size dependent from pf. Add check if received max_mtu is
not in eligible range then set it to IAVF_MAX_RXBUFFER.
Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66039eb9015eee4f7ff0c99b83c65c7ecb3c8190 ]
Fix bad page state, free inappropriate page in handling dummy
descriptor. iavf_build_skb now has to check not only if rx_buffer is
NULL but also if size is zero, same thing in iavf_clean_rx_irq.
Without this patch driver would free page that will be used
by napi_build_skb.
Fixes: a9f49e006030 ("iavf: Fix handling of dummy receive descriptors")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9f3f8f488005f6da3cfb66070706770ecaef747 ]
commit 0060c8783330 ("net: stmmac: implement support for passive mode
converters via dt") has changed the plat->interface field semantics from
containing the PHY-mode to specifying the MAC-PCS interface mode. Due to
that the loongson32 platform code will leave the phylink interface
uninitialized with the PHY-mode intended by the means of the actual
platform setup. The commit-author most likely has just missed the
arch-specific code to fix. Let's mend the Loongson32 platform code then by
assigning the PHY-mode to the phy_interface field of the STMMAC platform
data.
Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 502550123bee6a2ffa438409b5b9aad4d6db3a8c ]
The lantiq WDT driver uses clk_get_io(), which is not exported,
so export it to fix a build error:
ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined!
Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd60234222b2fd5573526da7bcd422801f271f5f ]
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former team
ports after a team device has been deleted; see test_LAG_cleanup() in the
last patch in this series.
Add unsync calls at their expected location, team_close().
v3:
* When adding or deleting a port, only sync/unsync addresses if the team
device is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86247aba599e5b07d7e828e6edaaebb0ef2b1158 ]
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former bond
slaves after a bond has been deleted; see test_LAG_cleanup() in the last
patch in this series.
Add unsync calls, via bond_hw_addr_flush(), at their expected location,
bond_close().
Add dev_mc_add() call to bond_open() to match the above change.
v3:
* When adding or deleting a slave, only sync/unsync, add/del addresses if
the bond is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d9a143ee3408349700f44a9197b7ae0e4faae5d ]
There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 86247aba599e ("net: bonding: Unsync device addresses on ndo_stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0e0747de0ea3dd87cdbb0393311e17471a9baf1 ]
Fix the incorrect return value check of dma_get_required_mask(). Due to
this incorrect check, the driver was always setting the DMA mask to 63 bit.
Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.com
Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6adc251dd2fede6aaaf6c39f7e4ad799eda3758 ]
According to the MPI specification, PCIe SGL buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: e0e0747de0ea ("scsi: mpt3sas: Fix return value check of dma_get_required_mask()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca2dccdeeb49a7e408112d681bf447984c845292 ]
The Aquantia datasheet notes that after issuing a Processor-Intensive
MDIO operation, like changing the low-power state of the device, the
driver should wait for the operation to finish before issuing a new MDIO
command.
The new aqr107_wait_processor_intensive_op() function is added which can
be used after these kind of MDIO operations. At the moment, we are only
adding it at the end of the suspend/resume calls.
The issue was identified on a board featuring the AQR113C PHY, on
which commands like 'ip link (..) up / down' issued without any delays
between them would render the link on the PHY to remain down.
The issue was easy to reproduce with a one-liner:
$ ip link set dev ethX down; ip link set dev ethX up; \
ip link set dev ethX down; ip link set dev ethX up;
Fixes: ac9e81c230eb ("net: phy: aquantia: add suspend / resume callbacks for AQR107 family")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220906130451.1483448-1-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64ae13ed478428135cddc2f1113dff162d8112d4 ]
__flow_hash_consistentify() wrongly swaps ipv4 addresses in few cases.
This function is indirectly used by __skb_get_hash_symmetric(), which is
used to fanout packets in AF_PACKET.
Intrusion detection systems may be impacted by this issue.
__flow_hash_consistentify() computes the addresses difference then swaps
them if the difference is negative. In few cases src - dst and dst - src
are both negative.
The following snippet mimics __flow_hash_consistentify():
```
#include <stdio.h>
#include <stdint.h>
int main(int argc, char** argv) {
int diffs_d, diffd_s;
uint32_t dst = 0xb225a8c0; /* 178.37.168.192 --> 192.168.37.178 */
uint32_t src = 0x3225a8c0; /* 50.37.168.192 --> 192.168.37.50 */
uint32_t dst2 = 0x3325a8c0; /* 51.37.168.192 --> 192.168.37.51 */
diffs_d = src - dst;
diffd_s = dst - src;
printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
src, dst, diffs_d, diffs_d, diffd_s, diffd_s);
diffs_d = src - dst2;
diffd_s = dst2 - src;
printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
src, dst2, diffs_d, diffs_d, diffd_s, diffd_s);
return 0;
}
```
Results:
src:3225a8c0 dst:b225a8c0, \
diff(s-d)=-2147483648(0x80000000) \
diff(d-s)=-2147483648(0x80000000)
src:3225a8c0 dst:3325a8c0, \
diff(s-d)=-16777216(0xff000000) \
diff(d-s)=16777216(0x1000000)
In the first case the addresses differences are always < 0, therefore
__flow_hash_consistentify() always swaps, thus dst->src and src->dst
packets have differents hashes.
Fixes: c3f8324188fa8 ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Ludovic Cintrat <ludovic.cintrat@gatewatcher.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e60cebf82948cfdc9497ea4553bab125587593c ]
using same source and destination ip/port for flow hash calculation
within the two directions.
Signed-off-by: zhang kai <zhangkaiheb@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 64ae13ed4784 ("net: core: fix flow symmetric hash")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81225b2ea161af48e093f58e8dfee6d705b16af4 ]
If an AF_PACKET socket is used to send packets through ipvlan and the
default xmit function of the AF_PACKET socket is changed from
dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option
name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and
remains as the initial value of 65535, this may trigger slab-out-of-bounds
bugs as following:
=================================================================
UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6
ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33
all Trace:
print_address_description.constprop.0+0x1d/0x160
print_report.cold+0x4f/0x112
kasan_report+0xa3/0x130
ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
ipvlan_start_xmit+0x29/0xa0 [ipvlan]
__dev_direct_xmit+0x2e2/0x380
packet_direct_xmit+0x22/0x60
packet_snd+0x7c9/0xc40
sock_sendmsg+0x9a/0xa0
__sys_sendto+0x18a/0x230
__x64_sys_sendto+0x74/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is:
1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW
and skb->protocol is not specified as in packet_parse_headers()
2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit()
In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is
called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which
use "skb->head + skb->mac_header", out-of-bound access occurs.
This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2()
and reset mac header in multicast to solve this out-of-bound bug.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 809f23c0423a43266e47a7dc67e95b5cb4d1cbfc ]
The underlying hardware may or may not allow reading of the head or tail
registers and it really makes no difference if we use the software
cached values. So, always used the software cached values.
Fixes: 9c6c12595b73 ("i40e: Detection and recovery of TX queue hung logic moved to service_task from tx_timeout")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 559c36c5a8d730c49ef805a72b213d3bba155cc8 ]
nf_osf_find() incorrectly returns true on mismatch, this leads to
copying uninitialized memory area in nft_osf which can be used to leak
stale kernel stack data to userspace.
Fixes: 22c7652cdaa8 ("netfilter: nft_osf: Add version option support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8d5dfd1d8747b56077d02664a8838c71ced948e ]
CTCP messages should only be at the start of an IRC message, not
anywhere within it.
While the helper only decodes packes in the ORIGINAL direction, its
possible to make a client send a CTCP message back by empedding one into
a PING request. As-is, thats enough to make the helper believe that it
saw a CTCP message.
Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39aebedeaaa95757f5c1f2ddb5f43fdddbf478ca ]
ct_sip_next_header and ct_sip_get_header return an absolute
value of matchoff, not a shift from current dataoff.
So dataoff should be assigned matchoff, not incremented by it.
This issue can be seen in the scenario when there are multiple
Contact headers and the first one is using a hostname and other headers
use IP addresses. In this case, ct_sip_walk_headers will work as follows:
The first ct_sip_get_header call to will find the first Contact header
but will return -1 as the header uses a hostname. But matchoff will
be changed to the offset of this header. After that, dataoff should be
set to matchoff, so that the next ct_sip_get_header call find the next
Contact header. But instead of assigning dataoff to matchoff, it is
incremented by it, which is not correct, as matchoff is an absolute
value of the offset. So on the next call to the ct_sip_get_header,
dataoff will be incorrect, and the next Contact header may not be
found at all.
Fixes: 05e3ced297fe ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a994b34b9abb9c08ee09e835b4027ff2147f9d94 ]
The 'enable-active-low' property is not a valid one.
Only 'enable-active-high' is valid, and when this property is absent
the gpio regulator will act as active low by default.
Remove the invalid 'enable-active-low' property.
Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9fdb0b86f087c2b7f6c6168dd0985a3c1eda87e ]
We should call of_node_put() for the reference returned by
of_parse_phandle() in fail path or when it is not used anymore.
Here we only need to move the of_node_put() before the check.
Fixes: d70241913413 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
Signed-off-by: Liang He <windhl@126.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220720073234.1255474-1-windhl@126.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8123437cf46ea5a0f6ca5cb3c528d8b6db97b9c2 ]
We've found the AUX channel to be less reliable with PCLK_EDP at a
higher rate (typically 25 MHz). This is especially important on systems
with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant
use of AUX.
According to Rockchip, using any rate other than 24 MHz can cause
"problems between syncing the PHY an PCLK", which leads to all sorts of
unreliabilities around register operations.
Fixes: d67a38c5a623 ("arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220830131212.v2.1.I98d30623f13b785ca77094d0c0fd4339550553b6@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeda05b5e92f51d9a09646ecb493f0a1e872a6ef ]
Add callbacks for atomic_destroy_state, atomic_duplicate_state and
atomic_reset to restore functionality of the DSI driver: this solves
vblank timeouts when another bridge is present in the chain.
Tested bridge chain: DSI <=> ANX7625 => aux-bus panel
Fixes: 7f6335c6a258 ("drm/mediatek: Modify dsi funcs to atomic operations")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220721172727.14624-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5467359a725de90b6b8d0dd865500f6373828ca ]
The Gru-Bob board does not have a pull-up resistor on its
WLAN_HOST_WAKE# pin, but Kevin does. The production/vendor kernel
specified the pin configuration correctly as a pull-up, but this didn't
get ported correctly to upstream.
This means Bob's WLAN_HOST_WAKE# pin is floating, causing inconsistent
wakeup behavior.
Note that bt_host_wake_l has a similar dynamic, but apparently the
upstream choice was to redundantly configure both internal and external
pull-up on Kevin (see the "Kevin has an external pull up" comment in
rk3399-gru.dtsi). This doesn't cause any functional problem, although
it's perhaps wasteful.
Fixes: 8559bbeeb849 ("arm64: dts: rockchip: add Google Bob")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220822164453.1.I75c57b48b0873766ec993bdfb7bc1e63da5a1637@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1eb70f54c445fcbb25817841e774adb3d912f3e8 upstream.
[backport for 5.10.y]
xfs_repair catches fork size/format mismatches, but the in-kernel
verifier doesn't, leading to null pointer failures when attempting
to perform operations on the fork. This can occur in the
xfs_dir_is_empty() where the in-memory fork format does not match
the size and so the fork data pointer is accessed incorrectly.
Note: this causes new failures in xfs/348 which is testing mode vs
ftype mismatches. We now detect a regular file that has been changed
to a directory or symlink mode as being corrupt because the data
fork is for a symlink or directory should be in local form when
there are only 3 bytes of data in the data fork. Hence the inode
verify for the regular file now fires w/ -EFSCORRUPTED because
the inode fork format does not match the format the corrupted mode
says it should be in.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a5280b312e2e7898b6397b2ca3cfd03f67d7be1 upstream.
[backport for 5.10.y]
The O_TMPFILE creation implementation creates a specific order of
operations for inode allocation/freeing and unlinked list
modification. Currently both are serialised by the AGI, so the order
doesn't strictly matter as long as the are both in the same
transaction.
However, if we want to move the unlinked list insertions largely out
from under the AGI lock, then we have to be concerned about the
order in which we do unlinked list modification operations.
O_TMPFILE creation tells us this order is inode allocation/free,
then unlinked list modification.
Change xfs_ifree() to use this same ordering on unlinked list
removal. This way we always guarantee that when we enter the
iunlinked list removal code from this path, we already have the AGI
locked and we don't have to worry about lock nesting AGI reads
inside unlink list locks because it's already locked and attached to
the transaction.
We can do this safely as the inode freeing and unlinked list removal
are done in the same transaction and hence are atomic operations
with respect to log recovery.
Reported-by: Frank Hofmann <fhofmann@cloudflare.com>
Fixes: 298f7bec503f ("xfs: pin inode backing buffer to the inode log item")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01ea173e103edd5ec41acec65b9261b87e123fc2 upstream.
XFS always inherits the SGID bit if it is set on the parent inode, while
the generic inode_init_owner does not do this in a few cases where it can
create a possible security problem, see commit 0fa3ecd87848
("Fix up non-directory creation in SGID directories") for details.
Switch XFS to use the generic helper for the normal path to fix this,
just keeping the simple field inheritance open coded for the case of the
non-sgid case with the bsdgrpid mount option.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b95b668eaaa2574e8ee72f143c52075e9955177e upstream.
We're only adding BCMs to the commit list in aggregate(), but there are
cases where pre_aggregate() is called without subsequently calling
aggregate(). In particular, in icc_sync_state() when a node with initial
BW has zero requests. Since BCMs aren't added to the commit list in
these cases, we don't actually send the zero BW request to HW. So the
resources remain on unnecessarily.
Add BCMs to the commit list in pre_aggregate() instead, which is always
called even when there are no requests.
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
[georgi: remove icc_sync_state for platforms with incomplete support]
Link: https://lore.kernel.org/r/20211125174751.25317-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
[dianders: dropped sm8350.c which isn't present in 5.10]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 683412ccf61294d727ead4a73d97397396e69a6b upstream.
Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.
Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.
KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.
Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.
Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[OP: applied kvm_arch_guest_memory_reclaimed() calls in kvm_set_memslot() and
kvm_mmu_notifier_invalidate_range_start();
OP: adjusted kvm_arch_guest_memory_reclaimed() to not use static_call_cond()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a09721dd47c8468b3f2fdd73f40422699ffe26dd upstream.
The following happened on an i.MX25 using flexcan with many packets on
the bus:
The rx-offload queue reached a length more than skb_queue_len_max. In
can_rx_offload_offload_one() the drop variable was set to true which
made the call to .mailbox_read() (here: flexcan_mailbox_read()) to
_always_ return ERR_PTR(-ENOBUFS) and drop the rx'ed CAN frame. So
can_rx_offload_offload_one() returned ERR_PTR(-ENOBUFS), too.
can_rx_offload_irq_offload_fifo() looks as follows:
| while (1) {
| skb = can_rx_offload_offload_one(offload, 0);
| if (IS_ERR(skb))
| continue;
| if (!skb)
| break;
| ...
| }
The flexcan driver wrongly always returns ERR_PTR(-ENOBUFS) if drop is
requested, even if there is no CAN frame pending. As the i.MX25 is a
single core CPU, while the rx-offload processing is active, there is
no thread to process packets from the offload queue. So the queue
doesn't get any shorter and this results is a tight loop.
Instead of always returning ERR_PTR(-ENOBUFS) if drop is requested,
return NULL if no CAN frame is pending.
Changes since v1: https://lore.kernel.org/all/20220810144536.389237-1-u.kleine-koenig@pengutronix.de
- don't break in can_rx_offload_irq_offload_fifo() in case of an error,
return NULL in flexcan_mailbox_read() in case of no pending CAN frame
instead
Fixes: 4e9c9484b085 ("can: rx-offload: Prepare for CAN FD support")
Link: https://lore.kernel.org/all/20220811094254.1864367-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org # v5.5
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 762df359aa5849e010ef04c3ed79d57588ce17d9 upstream.
riscv has an equivalent of arm bug fixed by 653d48b22166 ("arm: fix
really nasty sigreturn bug"); if signal gets caught by an interrupt that
hits when we have the right value in a0 (-513), *and* another signal
gets delivered upon sigreturn() (e.g. included into the blocked mask for
the first signal and posted while the handler had been running), the
syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are
in a syscall, after all) and a0 already restored to its original value
(-513, which happens to be -ERESTARTNOINTR) and assume that we need to
apply the usual syscall restart logics.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YxJEiSq%2FCGaL6Gm9@ZenIV/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69bef19d6b9700e96285f4b4e28691cda3dcd0d1 upstream.
When running gpio test on nxp-ls1028 platform with below command
gpiomon --num-events=3 --rising-edge gpiochip1 25
There will be a warning trace as below:
Call trace:
free_irq+0x204/0x360
lineevent_free+0x64/0x70
gpio_ioctl+0x598/0x6a0
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x5c/0x130
......
el0t_64_sync+0x1a0/0x1a4
The reason of this issue is that calling request_threaded_irq()
function failed, and then lineevent_free() is invoked to release
the resource. Since the lineevent_state::irq was already set, so
the subsequent invocation of free_irq() would trigger the above
warning call trace. To fix this issue, set the lineevent_state::irq
after the IRQ register successfully.
Fixes: 468242724143 ("gpiolib: cdev: refactor lineevent cleanup into lineevent_free")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
