IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit db8892bb1bb64b6e3d1381ac342a2ee31e1b76b6 ]
Patch adds support for Cadence DRD Super Speed Plus controller(CDNSP).
CDNSP DRD is a part of Cadence CDNSP controller.
The DRD CDNSP controller has a lot of difference on hardware level but on
software level is quite compatible with CDNS3 DRD. For this reason
CDNS3 DRD part of CDNS3 driver was reused for CDNSP driver.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Tested-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Stable-dep-of: 9d5333c93134 ("usb: cdns3: host: fix endless superspeed hub port reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56baa208f91061ff27ec2d93fbc483f624d373b4 ]
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix
SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
drivers using CQHCI might benefit from a similar change, if they
also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
I only patch the bcm7216 variant even though others potentially *could*
provide the 'supports-cqe' property (and thus enable CQHCI), because
d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing
(CQE)") and some Broadcom folks confirm that only the 7216 variant
actually supports it.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026124150.v4.3.I6a715feab6d01f760455865e968ecf0d85036018@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bcc55fe648b860ef0c2b8dc23adc05bcddb93c2 ]
Enabling this feature will allow the controller to stop the bus
clock when the bus is idle. The feature is not part of the standard
and is unique to newer Arasan cores and is enabled with a bit in a
vendor specific register. This feature will only be enabled for
non-removable devices because they don't switch the voltage and
clock gating breaks SD Card volatge switching.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20220427180853.35970-3-kdasu.kdev@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 56baa208f910 ("mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3a70f991dd07330225ea11e158e1d07ad5733fb ]
Re-organize the flags by basing the bit names on the flag that they
apply to. Also change the "flags" member in the "brcmstb_match_priv"
struct to const.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20220427180853.35970-2-kdasu.kdev@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 56baa208f910 ("mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 869e4ae4cd2a23d625aaa14ae62dbebf768cb77d ]
Add FORCE to placate a warning from make:
arch/nios2/boot/Makefile:24: FORCE prerequisite is missing
Fixes: 2fc8483fdcde ("nios2: Build infrastructure")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 534bd70374d646f17e2cebe0e6e4cdd478ce4f0c ]
When using dash as /bin/sh, the CC_HAS_ASM_GOTO_TIED_OUTPUT test fails
with a syntax error which is not the one we are looking for:
<stdin>: In function ‘foo’:
<stdin>:1:29: warning: missing terminating " character
<stdin>:1:29: error: missing terminating " character
<stdin>:2:5: error: expected ‘:’ before ‘+’ token
<stdin>:2:7: warning: missing terminating " character
<stdin>:2:7: error: missing terminating " character
<stdin>:2:5: error: expected declaration or statement at end of input
Removing '\n' solves this.
Fixes: 1aa0e8b144b6 ("Kconfig: Add option for asm goto w/ tied outputs to workaround clang-13 bug")
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4ad09d956f8eacff61e67e5b13ba8ebec3232f76 upstream.
In iio_register_sw_trigger_type(), configfs_register_default_group() is
possible to fail, but the entry add to iio_trigger_types_list is not
deleted.
This leaves wild in iio_trigger_types_list, which can cause page fault
when module is loading again. So fix this by list_del(&t->list) in error
path.
BUG: unable to handle page fault for address: fffffbfff81d7400
Call Trace:
<TASK>
iio_register_sw_trigger_type
do_one_initcall
do_init_module
load_module
...
Fixes: b662f809d410 ("iio: core: Introduce IIO software triggers")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221108032802.168623-1-chenzhongjin@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0aa60ff5d996d4ecdd4a62699c01f6d00f798d59 upstream.
Gesture Gain Control is in REG_GCONF_2 (0xa3), not in REG_CONFIG_2 (0x90).
Fixes: aff268cd532e ("iio: light: add APDS9960 ALS + promixity driver")
Signed-off-by: Alejandro Concepcion-Rodriguez <asconcepcion@acoro.eu>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/EaT-NKC-H4DNX5z4Lg9B6IWPD5TrTrYBr5DYB784wfDKQkTmzPXkoYqyUOrOgJH-xvTsEkFLcVkeAPZRUODEFI5dGziaWXwjpfBNLeNGfNc=@acoro.eu
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91e8b74fe6381e083f8aa55217bb0562785ab398 upstream.
CRC errors (code -84 EILSEQ) have been observed for some SanDisk
Ultra A1 cards when running at 50MHz.
Waveform analysis suggest that the level shifters that are used on the
RK3399-Q7 module for voltage translation between 3.0 and 3.3V don't
handle clock rates at or above 48MHz properly. Back off to 40MHz for
some safety margin.
Cc: stable@vger.kernel.org
Fixes: 60fd9f72ce8a ("arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM")
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221019-upstream-puma-sd-40mhz-v1-0-754a76421518@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6b1a1cf1c3ee430d3f5e47847047ce789a690aa upstream.
If the starting position of our insert range happens to be in the hole
between the two ext4_extent_idx, because the lblk of the ext4_extent in
the previous ext4_extent_idx is always less than the start, which leads
to the "extent" variable access across the boundary, the following UAF is
triggered:
==================================================================
BUG: KASAN: use-after-free in ext4_ext_shift_extents+0x257/0x790
Read of size 4 at addr ffff88819807a008 by task fallocate/8010
CPU: 3 PID: 8010 Comm: fallocate Tainted: G E 5.10.0+ #492
Call Trace:
dump_stack+0x7d/0xa3
print_address_description.constprop.0+0x1e/0x220
kasan_report.cold+0x67/0x7f
ext4_ext_shift_extents+0x257/0x790
ext4_insert_range+0x5b6/0x700
ext4_fallocate+0x39e/0x3d0
vfs_fallocate+0x26f/0x470
ksys_fallocate+0x3a/0x70
__x64_sys_fallocate+0x4f/0x60
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
==================================================================
For right shifts, we can divide them into the following situations：
1. When the first ee_block of ext4_extent_idx is greater than or equal to
start, make right shifts directly from the first ee_block.
1) If it is greater than start, we need to continue searching in the
previous ext4_extent_idx.
2) If it is equal to start, we can exit the loop (iterator=NULL).
2. When the first ee_block of ext4_extent_idx is less than start, then
traverse from the last extent to find the first extent whose ee_block
is less than start.
1) If extent is still the last extent after traversal, it means that
the last ee_block of ext4_extent_idx is less than start, that is,
start is located in the hole between idx and (idx+1), so we can
exit the loop directly (break) without right shifts.
2) Otherwise, make right shifts at the corresponding position of the
found extent, and then exit the loop (iterator=NULL).
Fixes: 331573febb6a ("ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20220922120434.1294789-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0481e5b3cc12ea7ccf4552d41518c89d3509004 upstream.
The core DWC3 device node was not properly removed by the custom
dwc3_exynos_remove_child() function. Replace it with generic
of_platform_depopulate() which does that job right.
Fixes: adcf20dcd262 ("usb: dwc3: exynos: Use of_platform API to create dwc3 core pdev")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20221110154131.2577-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ac3b5cd3e0521d92f9755e90d140382fc292510 upstream.
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the vdso Makefile to use "grep -E" instead.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20220920170633.3133829-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 290b5fe096e7dd0aad730d1af4f7f2d9fea43e11 ]
In the blamed commit, a rudimentary reallocation procedure for RX buffer
descriptors was implemented, for the situation when their format changes
between normal (no PTP) and extended (PTP).
enetc_hwtstamp_set() calls enetc_close() and enetc_open() in a sequence,
and this sequence loses information which was previously configured in
the TX BDR Mode Register, specifically via the enetc_set_bdr_prio() call.
The TX ring priority is configured by tc-mqprio and tc-taprio, and
affects important things for TSN such as the TX time of packets. The
issue manifests itself most visibly by the fact that isochron --txtime
reports premature packet transmissions when PTP is first enabled on an
enetc interface.
Save the TX ring priority in a new field in struct enetc_bdr (occupies a
2 byte hole on arm64) in order to make this survive a ring reconfiguration.
Fixes: 434cebabd3a2 ("enetc: Add dynamic allocation of extended Rx BD rings")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20221122130936.1704151-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 715bf2610f1d1adf3d4f9b7b3dd729984ec4270a ]
The &priv->si->hw construct dereferences 2 pointers and makes lines
longer than they need to be, in turn making the code harder to read.
Replace &priv->si->hw accesses with a "hw" variable when there are 2 or
more accesses within a function that dereference this. This includes
loops, since &priv->si->hw is a loop invariant.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 290b5fe096e7 ("net: enetc: preserve TX ring priority across reconfiguration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32bf8e1f6fb9f6dc334b2b98dffc2e5dcd51e513 ]
Future work in this driver would like to look at priv->active_offloads &
ENETC_F_QBV to determine whether a tc-taprio qdisc offload was
installed, but this does not produce the intended effect.
All the other flags in priv->active_offloads are managed dynamically,
except ENETC_F_QBV which is set statically based on the probed SI capability.
This change makes priv->active_offloads & ENETC_F_QBV really track the
presence of a tc-taprio schedule on the port.
Some existing users, like the enetc_sched_speed_set() call from
phylink_mac_link_up(), are best kept using the old logic: the tc-taprio
offload does not re-trigger another link mode resolve, so the scheduler
needs to be functional from the get go, as long as Qbv is supported at
all on the port. So to preserve functionality there, look at the static
station interface capability from pf->si->hw_features instead.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 290b5fe096e7 ("net: enetc: preserve TX ring priority across reconfiguration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f44e07a8afdd713ddc1a8832c39372fe5dd86895 ]
The size of the TOD programmable field was incorrectly increased from
four to eight bytes with commit 1a2c5840acf9 ("s390/dump: cleanup CPU
save area handling").
This leads to an elf notes section NT_S390_TODPREG which has a size of
eight instead of four bytes in case of kdump, however even worse is
that the contents is incorrect: it is supposed to contain only the
contents of the TOD programmable field, but in fact contains a mix of
the TOD programmable field (32 bit upper bits) and parts of the CPU
timer register (lower 32 bits).
Fix this by simply changing the size of the todpreg field within the
save area structure. This will implicitly also fix the size of the
corresponding elf notes sections.
This also gets rid of this compile time warning:
in function ‘fortify_memcpy_chk’,
inlined from ‘save_area_add_regs’ at arch/s390/kernel/crash_dump.c:99:2:
./include/linux/fortify-string.h:413:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field
(2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 1a2c5840acf9 ("s390/dump: cleanup CPU save area handling")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 661e5ebbafd26d9d2e3c749f5cf591e55c7364f5 ]
The ACPI buffer memory (string.pointer) should be freed as the buffer is
not used after returning from bgx_acpi_match_id(), free it to prevent
memory leak.
Fixes: 46b903a01c05 ("net, thunder, bgx: Add support to get MAC address from ACPI.")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20221123082237.1220521-1-liaoyu15@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c60c152230828825c06e62a8f1ce956d4b659266 ]
The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered. The fix is to change && to ||.
Reported-by: Denis Efremov <denis.e.efremov@oracle.com>
Reviewed-by: Guenter Roeck <groeck@google.com>
Fixes: 5d1ceb7f5e56 ("NFC: st21nfcb: Add HCI transaction event support")
Signed-off-by: Martin Faltesek <mfaltesek@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c40cde6b5171d9c8dfc69be00464fd1c75e210b ]
In com20020_probe(), if com20020_config() fails, dev and info
will not be freed, which will lead to a memory leak.
This patch adds freeing dev and info after com20020_config()
fails to fix this bug.
Compile tested only.
Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01365633bd1c836240f9bbf86bbeee749795480a ]
The main arcnet interrupt handler calls arcnet_close() then
arcnet_open(), if the RESET status flag is encountered.
This is invalid:
1) In general, interrupt handlers should never call ->ndo_stop() and
->ndo_open() functions. They are usually full of blocking calls and
other methods that are expected to be called only from drivers
init and exit code paths.
2) arcnet_close() contains a del_timer_sync(). If the irq handler
interrupts the to-be-deleted timer, del_timer_sync() will just loop
forever.
3) arcnet_close() also calls tasklet_kill(), which has a warning if
called from irq context.
4) For device reset, the sequence "arcnet_close(); arcnet_open();" is
not complete. Some children arcnet drivers have special init/exit
code sequences, which then embed a call to arcnet_open() and
arcnet_close() accordingly. Check drivers/net/arcnet/com20020.c.
Run the device RESET sequence from a scheduled workqueue instead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210128194802.727770-1-a.darwish@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 1c40cde6b517 ("arcnet: fix potential memory leak in com20020_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 590ce6d96d6a224b470a3862c33a483d5022bfdb ]
For DASD devices in raw_track_access mode only full track images are
read and written.
For this purpose it is not necessary to do search operation in the
locate record extended function. The documentation even states that
this might fail if the searched record is not found on a track.
Currently the driver sets a value of 1 in the search field for the first
record after record zero. This is the default for disks not in
raw_track_access mode but record 1 might be missing on a completely
empty track.
There has not been any problem with this on IBM storage servers but it
might lead to errors with DASD devices on other vendors storage servers.
Fix this by setting the search field to 0. Record zero is always available
even on a completely empty track.
Fixes: e4dbb0f2b5dd ("[S390] dasd: Add support for raw ECKD access.")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20221123160719.3002694-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 568fe84940ac0e4e0b2cd7751b8b4911f7b9c215 ]
In fib_table_insert(), if the alias was already inserted, but node not
exist, the error code should be set before return from error handling path.
Fixes: a6c76c17df02 ("ipv4: Notify route after insertion to the routing table")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20221120072838.2167047-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77934dc6db0d2b111a8f2759e9ad2fb67f5cffa5 ]
When connect() is called on a socket bound to the wildcard address,
we change the socket's saddr to a local address. If the socket
fails to connect() to the destination, we have to reset the saddr.
However, when an error occurs after inet_hash6?_connect() in
(dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave
the socket bound to the address.
From the user's point of view, whether saddr is reset or not varies
with errno. Let's fix this inconsistent behaviour.
Note that after this patch, the repro [0] will trigger the WARN_ON()
in inet_csk_get_port() again, but this patch is not buggy and rather
fixes a bug papering over the bhash2's bug for which we need another
fix.
For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect()
by this sequence:
s1 = socket()
s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s1.bind(('127.0.0.1', 10000))
s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000)))
# or s1.connect(('127.0.0.1', 10000))
s2 = socket()
s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s2.bind(('0.0.0.0', 10000))
s2.connect(('127.0.0.1', 10000)) # -EADDRNOTAVAIL
s2.listen(32) # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2);
[0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09
Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Fixes: 7c657876b63c ("[DCCP]: Initial implementation")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcd9e3c1656d0f7dd9743598c65c3ae24efb38d0 ]
nf_flow_table_block_setup and the driver TC_SETUP_FT call can modify the flow
block cb list while they are being traversed elsewhere, causing a crash.
Add a write lock around the calls to protect readers
Fixes: c29f74e0df7a ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 432e25902b9651622578c6248e549297d03caf66 ]
Racing conflict could be:
task A task B
list_for_each_entry
strcmp(h->name))
list_for_each_entry
strcmp(h->name)
kzalloc kzalloc
...... .....
device_create device_create
list_add
list_add
The root cause is that task B has no idea about the fact someone
else(A) has inserted heap with same name when it calls list_add,
so a potential collision occurs.
Fixes: c02a81fba74f ("dma-buf: Add dma-buf heaps framework")
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Andrew Davis <afd@ti.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/TYCP286MB2323873BBDF88020781FB986CA3B9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3637a29ccbb6461b7268c5c5db525935d510afc6 ]
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). Call pci_dev_put() before returning from
bnx2x_vf_is_pcie_pending() to avoid refcount leak.
Fixes: b56e9670ffa4 ("bnx2x: Prepare device and initialize VF database")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221119070202.1407648-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d6c982b26db94cc21bc9f7784f63e8286b7be62 ]
In former times, info->feature was populated via the parent driver
by pdata/regulator_init_data->driver_data for all regulators when
USB_PRODUCT_ID_LSB indicates a TWL6032.
Today, the information is not set, so re-add it at the regulator
definitions.
Fixes: 25d82337705e2 ("regulator: twl: make driver DT only")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20221120221208.3093727-2-andreas@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8427fd100c7b7793650e212a81e42f1cf124613d ]
In commit f11fe1dae1c4 ("net/sched: Make NET_ACT_CT depends on NF_NAT"),
it fixed the build failure when NF_NAT is m and NET_ACT_CT is y by
adding depends on NF_NAT for NET_ACT_CT. However, it would also cause
NET_ACT_CT cannot be built without NF_NAT, which is not expected. This
patch fixes it by changing to use "(!NF_NAT || NF_NAT)" as the depend.
Fixes: f11fe1dae1c4 ("net/sched: Make NET_ACT_CT depends on NF_NAT")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/b6386f28d1ba34721795fb776a91cbdabb203447.1668807183.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40781bfb836eda57d19c0baa37c7e72590e05fdc ]
When IPv6 module initializing in xfrm6_init(), register_pernet_subsys()
is possible to fail but its return value is ignored.
If IPv6 initialization fails later and xfrm6_fini() is called,
removing uninitialized list in xfrm6_net_ops will cause null-ptr-deref:
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 330 Comm: insmod
RIP: 0010:unregister_pernet_operations+0xc9/0x450
Call Trace:
<TASK>
unregister_pernet_subsys+0x31/0x3e
xfrm6_fini+0x16/0x30 [ipv6]
ip6_route_init+0xcd/0x128 [ipv6]
inet6_init+0x29c/0x602 [ipv6]
...
Fix it by catching the error return value of register_pernet_subsys().
Fixes: 8d068875caca ("xfrm: make gc_thresh configurable in all namespaces")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd0f6421162201e4b22ce757a1966729323185eb ]
If skb_linearize() fails in tipc_disc_rcv(), we need to free the skb instead of
handle it.
Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20221119072832.7896-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7b42969d63f47320853a802efd879fbdc4e010e ]
One extra conn_get() is needed in tipc_conn_alloc(), as after
tipc_conn_alloc() is called, tipc_conn_close() may free this
con before deferencing it in tipc_topsrv_accept():
tipc_conn_alloc();
newsk = newsock->sk;
<---- tipc_conn_close();
write_lock_bh(&sk->sk_callback_lock);
newsk->sk_data_ready = tipc_conn_data_ready;
Then an uaf issue can be triggered:
BUG: KASAN: use-after-free in tipc_topsrv_accept+0x1e7/0x370 [tipc]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x46
print_report+0x178/0x4b0
kasan_report+0x8c/0x100
kasan_check_range+0x179/0x1e0
tipc_topsrv_accept+0x1e7/0x370 [tipc]
process_one_work+0x6a3/0x1030
worker_thread+0x8a/0xdf0
This patch fixes it by holding it in tipc_conn_alloc(), then after
all accessing in tipc_topsrv_accept() releasing it. Note when does
this in tipc_topsrv_kern_subscr(), as tipc_conn_rcv_sub() returns
0 or -1 only, we don't need to check for "> 0".
Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e5d56c64afcd6fd2d132ea972605b66f8a7d3c4 ]
A crash was reported by Wei Chen:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:tipc_conn_close+0x12/0x100
Call Trace:
tipc_topsrv_exit_net+0x139/0x320
ops_exit_list.isra.9+0x49/0x80
cleanup_net+0x31a/0x540
process_one_work+0x3fa/0x9f0
worker_thread+0x42/0x5c0
It was caused by !con->sock in tipc_conn_close(). In tipc_topsrv_accept(),
con is allocated in conn_idr then its sock is set:
con = tipc_conn_alloc();
... <----[1]
con->sock = newsock;
If tipc_conn_close() is called in anytime of [1], the null-pointer-def
is triggered by con->sock->sk due to con->sock is not yet set.
This patch fixes it by moving the con->sock setting to tipc_conn_alloc()
under s->idr_lock. So that con->sock can never be NULL when getting the
con from s->conn_idr. It will be also safer to move con->server and flag
CF_CONNECTED setting under s->idr_lock, as they should all be set before
tipc_conn_alloc() is called.
Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf2e65cac7f2e1ae729c2fbc849091df9699f96 ]
In case command interface is down, or the command is not allowed, driver
did not increment the entry refcount, but might have decrement as part
of forced completion handling.
Fix that by always increment and decrement the refcount to make it
symmetric for all flows.
Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler")
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reported-by: Jack Wang <jinpu.wang@ionos.com>
Tested-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61db3d7b99a367416e489ccf764cc5f9b00d62a1 ]
Fix a bug in calculation of FW tracer timestamp. Decreasing one in the
calculation should effect only bits 52_7 and not effect bits 6_0 of the
timestamp, otherwise bits 6_0 are always set in this calculation.
Fixes: 70dd6fdb8987 ("net/mlx5: FW tracer, parse traces and kernel tracing support")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Feras Daoud <ferasda@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7aa1a76d4a0a3c401025b60c401412bbb60f8c6 ]
This patch introduced a regression: commit 48596a8ddc46 ("netfilter:
ipset: Fix adding an IPv4 range containing more than 2^31 addresses")
The variable e.ip is passed to adtfn() function which finally adds the
ip address to the set. The patch above refactored the for loop and moved
e.ip = htonl(ip) to the end of the for loop.
What this means is that if the value of "ip" changes between the first
assignement of e.ip and the forloop, then e.ip is pointing to a
different ip address than "ip".
Test case:
$ ipset create jdtest_tmp hash:ip family inet hashsize 2048 maxelem 100000
$ ipset add jdtest_tmp 10.0.1.1/31
ipset v6.21.1: Element cannot be added to the set: it's already added
The value of ip gets updated inside the "else if (tb[IPSET_ATTR_CIDR])"
block but e.ip is still pointing to the old value.
Fixes: 48596a8ddc46 ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses")
Reviewed-by: Joshua Hunt <johunt@akamai.com>
Signed-off-by: Vishwanath Pai <vpai@akamai.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f7b51bf09baca8e4f80cbe879536842bafb5f31 ]
The range size of consecutive elements were not limited. Thus one could
define a huge range which may result soft lockup errors due to the long
execution time. Now the range size is limited to 2^20 entries.
Reported-by: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: c7aa1a76d4a0 ("netfilter: ipset: regression in ip_set_hash_ip.c")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25c94b051592c010abe92c85b0485f1faedc83f3 ]
If device_register() returns error in vmbus_device_register(),
the name allocated by dev_set_name() must be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().
Fixes: 09d50ff8a233 ("Staging: hv: make the Hyper-V virtual bus code build")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221119081135.1564691-3-yangyingliang@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f92a4b50f0bd7fd52391dc4bb9a309085d278f91 ]
In the error path of vmbus_device_register(), device_unregister()
is called, which calls vmbus_device_release(). The latter frees
the struct hv_device that was passed in to vmbus_device_register().
So remove the kfree() in vmbus_add_channel_work() to avoid a double
free.
Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info")
Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221119081135.1564691-2-yangyingliang@huawei.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cef6b73fba96abef731a53501924fc3c4a0f947 ]
'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded
case, it will be invalid before return.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20221118011249.48112-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0873016d46f6dfafd1bdf4d9b935b3331b226f7c ]
Setting of the port flag `NFP_PORT_CHANGED`, introduced
to ensure the correct reading of EEPROM data, causes a
fatal kernel NULL pointer dereference in cases where
the target netdev type cannot be determined.
Add validation of port struct pointer before attempting
to set the `NFP_PORT_CHANGED` flag. Return that operation
is not supported if the netdev type cannot be determined.
Fixes: 4ae97cae07e1 ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`")
Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4abd9600b9d15d3d92a9ac25cf200422a4c415ee ]
The error is reflected in that it shows wrong splittable status of
port when executing "devlink port show".
The reason which leads the error is that the assigned operation of
splittable is just a simple negation operation of split and it does
not consider port lanes quantity. A splittable port should have
several lanes that can be split(lanes quantity > 1).
If without the judgement, it will show wrong message for some
firmware, such as 2x25G, 2x10G.
Fixes: a0f49b548652 ("devlink: Add a new devlink port split ability attribute and pass to netlink")
Signed-off-by: Diana Wang <na.wang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5619537284f1017e9f6c7500b02b859b3830a06d ]
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called,
so in error path in probe() and remove() function, pci_dev_put()
should be called to avoid refcount leak. Compile tested only.
Fixes: 1a0bdadb4e36 ("net/pch_gbe: supports eg20t ptp clock")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221117135148.301014-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 594c61ffc77de0a197934aa0f1df9285c68801c6 ]
If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference
the NULL pointer (bitmap->table).
Make sure, that mlx4_bitmap_alloc_range called in no error case.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d57febe1a478 ("net/mlx4: Add A0 hybrid steering")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Peter Kosyh <pkosyh@yandex.ru>
Link: https://lore.kernel.org/r/20221117152806.278072-1-pkosyh@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
