IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 3d57f36c89d8ba32b2c312f397a37fd1a2dc7cfc ]
I no longer work for Plantronics (aka Poly, aka HP) and do not have
access to the headsets in order to test. However, as noted by Maxim,
the other 32xx models that share the same base code set as the 3220
would need the same quirk. This patch adds the PIDs for the rest of
the Blackwire 32XX product family that require the quirk.
Plantronics Blackwire 3210 Series (047f:c055)
Plantronics Blackwire 3215 Series (047f:c057)
Plantronics Blackwire 3225 Series (047f:c058)
Quote from previous patch by Maxim Mikityanskiy
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
End quote
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4eab1c2fe06c98a4dff258dd64800b6986c101e9 ]
The HID descriptor of this device contains two mouse collections, one
for mouse emulation and the other for the trackpoint.
Both collections get merged and, because the first one defines X and Y,
the movemenent events reported by the trackpoint collection are
ignored.
Set the MT_CLS_WIN_8_FORCE_MULTI_INPUT class for this device to be able
to receive its reports.
This fix is similar to/based on commit 40d5bb87377a ("HID: multitouch:
enable multi-input as a quirk for some devices").
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/825
Reported-by: Akito <the@akito.ooo>
Tested-by: Akito <the@akito.ooo>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 67c90d14018775556d5420382ace86521421f9ff upstream.
The MCP2221 driver should not connect to the hidraw userspace interface,
as it needs exclusive access to the chip.
If you want to use /dev/hidrawX with the MCP2221, you need to avoid
binding this driver to the device and use the hid generic driver instead
(e.g. using udev rules).
Cc: stable@vger.kernel.org
Reported-by: Sven Zühlsdorf <sven.zuehlsdorf@vigem.de>
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221103222714.21566-2-Enrik.Berkhan@inka.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1db1f392591aff13fd643f0ec7c1d5e27391d700 upstream.
Some Wacom devices have a special "bootloader" mode that is used for
firmware flashing. When operating in this mode, the device cannot be
used for input, and the HID descriptor is not able to be processed by
the driver. The driver generates an "Unknown device_type" warning and
then returns an error code from wacom_probe(). This is a problem because
userspace still needs to be able to interact with the device via hidraw
to perform the firmware flash.
This commit adds a non-generic device definition for 056a:0094 which
is used when devices are in "bootloader" mode. It marks the devices
with a special BOOTLOADER type that is recognized by wacom_probe() and
wacom_raw_event(). When we see this type we ensure a hidraw device is
created and otherwise keep our hands off so that userspace is in full
control.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9d013910df22de91333a0acc81d1dbb115bd76f6 ]
This is no bugfix (so no Fixes: tag is necessary) as it is
taken care of in hid_sensor_custom_add_attributes().
The motivation for this patch is that:
hid_sensor_custom_field.attr_name and
hid_sensor_custom_field.attrs
has the size of HID_CUSTOM_TOTAL_ATTRS and used in same context.
We compare against HID_CUSTOM_TOTAL_ATTRS when
looping through hid_custom_attrs.
We will silent the smatch error:
hid_sensor_custom_add_attributes() error: buffer overflow
'hid_custom_attrs' 8 <= 10
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3405a4beaaa852f3ed2a5eb3b5149932d5c3779b ]
Commit f7d8e387d9ae ("HID: uclogic: Switch to Digitizer usage for
styluses") changed the usage used in UCLogic from "Pen" to "Digitizer".
However, the IS_INPUT_APPLICATION() macro evaluates to false for
HID_DG_DIGITIZER causing issues with the XP-Pen Star G640 tablet.
Add the HID_QUIRK_HIDINPUT_FORCE quirk to bypass the
IS_INPUT_APPLICATION() check.
Reported-by: Torge Matthies <openglfreak@googlemail.com>
Reported-by: Alexander Zhang <alex@alexyzhang.dev>
Tested-by: Alexander Zhang <alex@alexyzhang.dev>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ad6645a9dce4d0e42daca6ebf32a154401c59d3 ]
The Acer Aspire Switch V 10 (SW5-017)'s keyboard-dock uses the same
ITE controller setup as other Acer Switch 2-in-1's.
This needs special handling for the wifi on/off toggle hotkey as well as
to properly report touchpad on/off keypresses.
Add the USB-ids for the SW5-017's keyboard-dock with a quirk setting of
QUIRK_TOUCHPAD_ON_OFF_REPORT to fix both issues.
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7c20f3815985570ac71c39b1a3e68c201109578 ]
The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids
as the Acer One S1003 keyboard-dock. Yet they are not entirely the same:
1. The S1003 keyboard-dock has the same report descriptors as the
S1002 keyboard-dock (which has different USB-ids)
2. The Acer Aspire Switch 10E's keyboard-dock has different
report descriptors from the S1002/S1003 keyboard docks and it
sends 0x00880078 / 0x00880079 usage events when the touchpad is
toggled on/off (which is handled internally).
This means that all Acer kbd-docks handled by the hid-ite.c drivers
report their touchpad being toggled on/off through these custom
usage-codes with the exception of the S1003 dock, which likely is
a bug of that dock.
Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003
usb-id so that the touchpad toggling will get reported to userspace on
the Aspire Switch 10E.
Since the Aspire Switch 10E's kbd-dock has different report-descriptors,
this also requires adding support for fixing those to ite_report_fixup().
Setting the quirk will also cause ite_report_fixup() to hit the
S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock
never generates any input-reports for the fixed up part of the
descriptors this does not matter; and if there are versions out there
which do actually send input-reports for the touchpad-toggle then the
fixup should actually help to make things work.
This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 9ad6645a9dce ("HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c961facb5b19634eee5bcdd91fc5bf3f1c545bc5 ]
Make the hid-ite driver handle the Acer S1002 keyboard-dock, this
leads to 2 improvements:
1. The non working wifi-toggle hotkey now works.
2. Toggling the touchpad on of with the hotkey will no show OSD
notifications in e.g. GNOME3. The actual toggling is handled inside
the keyboard, this adds support for notifying evdev listeners about this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 9ad6645a9dce ("HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ec61b41918587be530398b0d1c9a0d16619397e5 upstream.
Syzbot reported shift-out-of-bounds in hid_report_raw_event.
microsoft 0003:045E:07DA.0001: hid_field_extract() called with n (128) >
32! (swapper/0)
======================================================================
UBSAN: shift-out-of-bounds in drivers/hid/hid-core.c:1323:20
shift exponent 127 is too large for 32-bit type 'int'
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
6.1.0-rc4-syzkaller-00159-g4bbf3422df78 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS
Google 10/26/2022
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_shift_out_of_bounds+0x3a6/0x420 lib/ubsan.c:322
snto32 drivers/hid/hid-core.c:1323 [inline]
hid_input_fetch_field drivers/hid/hid-core.c:1572 [inline]
hid_process_report drivers/hid/hid-core.c:1665 [inline]
hid_report_raw_event+0xd56/0x18b0 drivers/hid/hid-core.c:1998
hid_input_report+0x408/0x4f0 drivers/hid/hid-core.c:2066
hid_irq_in+0x459/0x690 drivers/hid/usbhid/hid-core.c:284
__usb_hcd_giveback_urb+0x369/0x530 drivers/usb/core/hcd.c:1671
dummy_timer+0x86b/0x3110 drivers/usb/gadget/udc/dummy_hcd.c:1988
call_timer_fn+0xf5/0x210 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x76a/0x980 kernel/time/timer.c:1790
run_timer_softirq+0x63/0xf0 kernel/time/timer.c:1803
__do_softirq+0x277/0x75b kernel/softirq.c:571
__irq_exit_rcu+0xec/0x170 kernel/softirq.c:650
irq_exit_rcu+0x5/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1107
======================================================================
If the size of the integer (unsigned n) is bigger than 32 in snto32(),
shift exponent will be too large for 32-bit type 'int', resulting in a
shift-out-of-bounds bug.
Fix this by adding a check on the size of the integer (unsigned n) in
snto32(). To add support for n greater than 32 bits, set n to 32, if n
is greater than 32.
Reported-by: syzbot+8b1641d2f14732407e23@syzkaller.appspotmail.com
Fixes: dde5845a529f ("[PATCH] Generic HID layer - code split")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d180b6496143cd360c5d5f58ae4b9a8229c1f344 upstream.
If an empty buf is received, lbuf is also empty. So lbuf is
accessed by index -1.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: f31a2de3fe36 ("HID: hid-lg4ff: Allow switching of Logitech gaming wheels between compatibility modes")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6d910a89a2391e5ce1f275d205023880a33d3f8 upstream.
Some additional USB mouse devices are needing ALWAYS_POLL quirk without
which they disconnect and reconnect every 60s.
Add below devices to the known quirk list.
CHERRY VID 0x046a, PID 0x000c
MICROSOFT VID 0x045e, PID 0x0783
PRIMAX VID 0x0461, PID 0x4e2a
Signed-off-by: Ankit Patel <anpatel@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5bcb94b0954a026bbd671741fdb00e7141f9c91 ]
If hid_add_device() returns error, it should call hid_destroy_device()
to free hid_dev which is allocated in hid_allocate_device().
Fixes: 74c4fb058083 ("HID: hv_mouse: Properly add the hid device")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79425b297f56bd481c6e97700a9a4e44c7bcfa35 ]
The MadCatz variant of the MMO7 mouse has the ID 0738:1713 and the same
quirks as the Saitek variant.
Signed-off-by: Samuel Bailey <samuel.bailey1@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb5f0c855dcfc893ae5ed90e4c646bde9e4498bf ]
Under certain conditions the Magic Trackpad can group 2 reports in a
single packet. The packet is split and the raw event function is
invoked recursively for each part.
However, after processing each part, the BTN_MOUSE status is updated,
sending multiple click events. [1]
Return after processing double reports to avoid this issue.
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/811 # [1]
Fixes: a462230e16ac ("HID: magicmouse: enable Magic Trackpad support")
Reported-by: Nulo <git@nulo.in>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20221009182747.90730-1-jose.exposito89@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ]
roccat_report_event() is responsible for registering
roccat-related reports in struct roccat_device.
int roccat_report_event(int minor, u8 const *data)
{
struct roccat_device *device;
struct roccat_reader *reader;
struct roccat_report *report;
uint8_t *new_value;
device = devices[minor];
new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
if (!new_value)
return -ENOMEM;
report = &device->cbuf[device->cbuf_end];
/* passing NULL is safe */
kfree(report->value);
...
The registered report is stored in the struct roccat_device member
"struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value,
kfree() the saved report from cbuf[0] and allocates a new reprot.
Since there is no lock when this kfree() is performed,
kfree() can be performed even while reading the saved report.
static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct roccat_reader *reader = file->private_data;
struct roccat_device *device = reader->device;
struct roccat_report *report;
ssize_t retval = 0, len;
DECLARE_WAITQUEUE(wait, current);
mutex_lock(&device->cbuf_lock);
...
report = &device->cbuf[reader->cbuf_start];
/*
* If report is larger than requested amount of data, rest of report
* is lost!
*/
len = device->report_size > count ? count : device->report_size;
if (copy_to_user(buffer, report->value, len)) {
retval = -EFAULT;
goto exit_unlock;
}
...
The roccat_read() function receives the device->cbuf report and
delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of
the Nth report->value is in progress, the pointer that copy_to_user()
is working on is kfree()ed and UAF read may occur. (race condition)
Since the device node of this driver does not set separate permissions,
this is not a security vulnerability, but because it is used for
requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or
There is a possibility to use it by giving.
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit be6e2b5734a425941fcdcdbd2a9337be498ce2cf upstream.
This fixes broken atomic checks which cause a race between the
release-timer and processing of hid input.
I noticed that contacts were sometimes sticking, even with the "sticky
fingers" quirk enabled. This fixes that problem.
Cc: stable@vger.kernel.org
Fixes: 9609827458c3 ("HID: multitouch: optimize the sticky fingers timer")
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220907150159.2285460-1-andri@yngvason.is
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e1fa076706209cc447d7a2abd0843a18277e5ef7 ]
There is a timing issue captured during ishtp client sending stress tests.
It was observed during stress tests that ISH firmware is getting out of
ordered messages. This is a rare scenario as the current set of ISH client
drivers don't send much data to firmware. But this may not be the case
going forward.
When message size is bigger than IPC MTU, ishtp splits the message into
fragments and uses serialized async method to send message fragments.
The call stack:
ishtp_cl_send_msg_ipc->ipc_tx_callback(first fregment)->
ishtp_send_msg(with callback)->write_ipc_to_queue->
write_ipc_from_queue->callback->ipc_tx_callback(next fregment)......
When an ipc write complete interrupt is received, driver also calls
write_ipc_from_queue->ipc_tx_callback in ISR to start sending of next fragment.
Through ipc_tx_callback uses spin_lock to protect message splitting, as the
serialized sending method will call back to ipc_tx_callback again, so it doesn't
put sending under spin_lock, it causes driver cannot guarantee all fragments
be sent in order.
Considering this scenario:
ipc_tx_callback just finished a fragment splitting, and not call ishtp_send_msg
yet, there is a write complete interrupt happens, then ISR->write_ipc_from_queue
->ipc_tx_callback->ishtp_send_msg->write_ipc_to_queue......
Because ISR has higher exec priority than normal thread, this causes the new
fragment be sent out before previous fragment. This disordered message causes
invalid message to firmware.
The solution is, to send fragments synchronously:
Use ishtp_write_message writing fragments into tx queue directly one by one,
instead of ishtp_send_msg only writing one fragment with completion callback.
As no completion callback be used, so change ipc_tx_callback to ipc_tx_send.
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94553f8a218540d676efbf3f7827ed493d1057cf ]
The double `like' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cd11d1a6114bd4bc6450ae59f6e110ec47362126 upstream.
It is possible for a malicious device to forgo submitting a Feature
Report. The HID Steam driver presently makes no prevision for this
and de-references the 'struct hid_report' pointer obtained from the
HID devices without first checking its validity. Let's change that.
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Fixes: c164d6abf3841 ("HID: add driver for Valve Steam Controller")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5539722eb832441f309642fe5102cc3536f92b8 ]
The Elantech touchscreen/digitizer in the Surface Go mistakenly reports
having a battery. This results in a low battery message every time you
try to use the pen.
This patch adds a quirk to ignore the non-existent battery and
gets rid of the false low battery messages.
Signed-off-by: Zoltan Tamas Vajda <zoltan.tamas.vajda@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit decfe496fe77061dea658a0bfa11afd4f92b540d ]
Battery status is reported for the HP Spectre X360 Convertible 15-df0xxx
even if it does not have a battery. Prevent it to always report the
battery as low.
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1117d182c5d72abd7eb8b7d5e7b8c3373181c3ab ]
U1_UNICORN_LEGACY id was added to the driver, but was not declared
in the device id table, making it impossible to use.
Fixes: 640e403 ("HID: alps: Add AUI1657 device ID")
Signed-off-by: Artem Borisov <dedsa2002@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62ac2473553a00229e67bdf3cb023b62cf7f5a9a ]
Smatch Warning:
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy()
'&mcp->txbuf[5]' too small (59 vs 255)
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() 'buf'
too small (34 vs 255)
The 'len' variable can take a value between 0-255 as it can come from
data->block[0] and it is user data. So add an bound check to prevent a
buffer overflow in memcpy().
Fixes: 67a95c21463d ("HID: mcp2221: add usb to i2c-smbus host bridge")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 381583845d19cb4bd21c8193449385f3fefa9caf ]
Smatch warnings:
drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy()
'data->block[1]' too small (33 vs 255)
drivers/hid/hid-cp2112.c:793 cp2112_xfer() error: __memcpy() 'buf' too
small (64 vs 255)
The 'read_length' variable is provided by 'data->block[0]' which comes
from user and it(read_length) can take a value between 0-255. Add an
upper bound to 'read_length' variable to prevent a buffer overflow in
memcpy().
Fixes: 542134c0375b ("HID: cp2112: Fix I2C_BLOCK_DATA transactions")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d6b675687a4ab4dba684716d97c8c6f81bf10905 upstream.
Touch switch state is received through WACOM_PAD_FIELD. However, it
is reported by touch_input. Don't register pad_input if no other pad
events require the interface.
Cc: stable@vger.kernel.org
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ccced33a0ba39b0103ae1dfbf7f1dffdc0a1bc2 upstream.
The generic routine, wacom_wac_pen_event, turns rotation value 90
degree anti-clockwise before posting the events. This non-zero
event trggers a non-zero ABS_Z event for non art pen tools. However,
HID_DG_TWIST is only supported by art pen.
[jkosina@suse.cz: fix build: add missing brace]
Cc: stable@vger.kernel.org
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1af20714fedad238362571620be0bd690ded05b6 ]
'input' is a managed resource allocated with devm_input_allocate_device(),
so there is no need to call input_free_device() explicitly or
there will be a double free.
According to the doc of devm_input_allocate_device():
* Managed input devices do not need to be explicitly unregistered or
* freed as it will be done automatically when owner device unbinds from
* its driver (or binding fails).
Fixes: b7429ea53d6c ("HID: elan: Fix memleak in elan_input_configured")
Fixes: 9a6a4193d65b ("HID: Add driver for USB ELAN Touchpad")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 116c3f4a78ebe478d5ad5a038baf931e93e7d748 ]
Increase maximum brightness for Dream Cheeky to 63. Emperically
determined based on testing in kernel 4.4 on this device:
Bus 003 Device 002: ID 1d34:0004 Dream Cheeky Webmail Notifier
Fixes: 6c7ad07e9e05 ("HID: migrate USB LED driver from usb misc to hid")
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc4ef9d5724973193bfa5ebed181dba6de3a56db ]
There is a slab-out-of-bounds Write bug in hid-bigbenff driver.
The problem is the driver assumes the device must have an input but
some malicious devices violate this assumption.
Fix this by checking hid_device's input is non-empty before its usage.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 95cd2cdc88c755dcd0a58b951faeb77742c733a4 upstream.
This applies the similar quirks used by previous generation devices
such as X1 tablet for X12 tablet, so that the trackpoint and buttons
can work.
This patch was applied and tested working on 5.17.1 .
Cc: stable@vger.kernel.org # 5.8+ given that it relies on 40d5bb87377a
Signed-off-by: Tao Jin <tao-j@outlook.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/CO6PR03MB6241CB276FCDC7F4CEDC34F6E1E29@CO6PR03MB6241.namprd03.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d07cef7fd7599450b3d03e1915efc2a96e1f03f upstream.
The Google Whiskers touchpad does not work properly with the default
multitouch configuration. Instead, use the same configuration as Google
Rose.
Signed-off-by: Marek Maslanka <mm@semihalf.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5e5e03e94764148a01757b2fa4737d3445c13a6 ]
Internally kernel prepends all report buffers, for both numbered and
unnumbered reports, with report ID, therefore to properly handle unnumbered
reports we should prepend it ourselves.
For the same reason we should skip the first byte of the buffer when
calling i2c_hid_set_or_send_report() which then will take care of properly
formatting the transfer buffer based on its separate report ID argument
along with report payload.
[jkosina@suse.cz: finalize trimmed sentence in changelog as spotted by Benjamin]
Fixes: 9b5a9ae88573 ("HID: i2c-hid: implement ll_driver transport-layer callbacks")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f97ec5d75e9261a5da78dc28a8955b7cc0c4468b upstream.
Allocating memory with kmalloc and GPF_DMA32 is not allowed, the
allocator will ignore the attribute.
Instead, use dma_alloc_coherent() API as we allocate a small amount of
memory to transfer firmware fragment to the ISH.
On Arcada chromebook, after the patch the warning:
"Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xcc0 (GFP_KERNEL). Fix your code!"
is gone. The ISH firmware is loaded properly and we can interact with
the ISH:
> ectool --name cros_ish version
...
Build info: arcada_ish_v2.0.3661+3c1a1c1ae0 2022-02-08 05:37:47 @localhost
Tool version: v2.0.12300-900b03ec7f 2022-02-08 10:01:48 @localhost
Fixes: commit 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 25666e8ccd952627899b09b68f7c9b68cfeaf028 ]
As of logitech lightspeed receiver fw version 04.02.B0009,
HIDPP_PARAM_DEVICE_INFO is being reported as 0x11.
With patch "HID: logitech-dj: add support for the new lightspeed receiver
iteration", the mouse starts to error out with:
logitech-djreceiver: unusable device of type UNKNOWN (0x011) connected on
slot 1
and becomes unusable.
This has been noticed on a Logitech G Pro X Superlight fw MPM 25.01.B0018.
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Acked-by: Nestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc71d37fd1f11e0495b1cf580909ebea37eaa886 ]
The driver creates the top row map sysfs attribute in input_configured()
method; unfortunately we do not have a callback that is executed when HID
interface is unbound, thus we are leaking these sysfs attributes, for
example when device is disconnected.
To fix it let's switch to managed version of adding sysfs attributes which
will ensure that they are destroyed when the driver is unbound.
Fixes: 14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 327b89f0acc4c20a06ed59e4d9af7f6d804dc2e2 upstream.
This patch adds a new key definition for KEY_ALL_APPLICATIONS
and aliases KEY_DASHBOARD to it.
It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS.
Signed-off-by: William Mahon <wmahon@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfa26ba343c727e055223be04e08f2ebdd43c293 upstream.
Numerous keyboards are adding dictate keys which allows for text
messages to be dictated by a microphone.
This patch adds a new key definition KEY_DICTATE and maps 0x0c/0x0d8
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: William Mahon <wmahon@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220303021501.1.I5dbf50eb1a7a6734ee727bda4a8573358c6d3ec0@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd5dd6acd8f823ea804f76d3af64fa1be9d5fb78 upstream.
This patch adds support for the UGTABLET WP5540 digitizer tablet
devices. Without it, the pen moves the cursor, but neither the
buttons nor the tap sensor in the tip do work.
Signed-off-by: Sergio Costas <rastersoft@gmail.com>
Link: https://lore.kernel.org/r/63dece1d-91ca-1b1b-d90d-335be66896be@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fe6acd4dc922237b30e55473c9349c6ce0690f3 upstream.
Unfortunately details of USB HID transport bled into HID core and
handling of numbered/unnumbered reports is quite a mess, with
hid_report_len() calculating the length according to USB rules,
and hid_hw_raw_request() adding report ID to the buffer for both
numbered and unnumbered reports.
Untangling it all requres a lot of changes in HID, so for now let's
handle this in the driver.
[jkosina@suse.cz: microoptimize field->report->id to report->id]
Fixes: 14c9c014babe ("HID: add vivaldi HID driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org> # CoachZ
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fd8d135b2c5e88662f2729e034913f183455a667 ]
Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5fe7864d8ada170f19cc47d176bf8260ffb4263 ]
When a keyboard without a function key is detected, instead of removing
all quirks, remove only the APPLE_HAS_FN quirk.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa320fdbbbb482c19100f51461bd0069753ce3d7 ]
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443763 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff6b548afe4d9d1ff3a0f6ef79e8cbca25d8f905 ]
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443804 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a94131d6920916ccb6a357037c535533af08819 ]
The function performs a check on the hdev input parameters, however, it
is used before the check.
Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443827 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f364c571a5c77e96de2d32062ff019d6b8d2e2bc ]
The function performs a check on its input parameters, however, the
hdev parameter is used before the check.
Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.
Fixes: 9614219e9310e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443831 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 20f3cf5f860f9f267a6a6e5642d3d0525edb1814 upstream.
If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.
This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.
Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: 003f50ab673c (HID: wacom: Update last_slot_field during pre_report phase)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df03e9bd6d4806619b4cdc91a3d7695818a8e2b7 upstream.
AES hardware may internally re-classify a contact that it thought was
intentional as a palm. Intentional contacts are reported as "down" with
the confidence bit set. When this re-classification occurs, however, the
state transitions to "up" with the confidence bit cleared. This kind of
transition appears to be legal according to Microsoft docs, but we do
not handle it correctly. Because the confidence bit is clear, we don't
call `wacom_wac_finger_slot` and update userspace. This causes hung
touches that confuse userspace and interfere with pen arbitration.
This commit adds a special case to ignore the confidence flag if a contact
is reported as removed. This ensures we do not leave a hung touch if one
of these re-classification events occured. Ideally we'd have some way to
also let userspace know that the touch has been re-classified as a palm
and needs to be canceled, but that's not possible right now :)
Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: 7fb0413baa7f (HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 546e41ac994cc185ef3de610ca849a294b5df3ba upstream.
These two values go hand-in-hand and must be valid for the driver to
behave correctly. We are currently lazy about updating the values and
rely on the "expected" code flow to take care of making sure they're
valid at the point they're needed. The "expected" flow changed somewhat
with commit f8b6a74719b5 ("HID: wacom: generic: Support multiple tools
per report"), however. This led to problems with the DTH-2452 due (in
part) to *all* contacts being fully processed -- even those past the
expected contact count. Specifically, the received count gets reset to
0 once all expected fingers are processed, but not the expected count.
The rest of the contacts in the report are then *also* processed since
now the driver thinks we've only processed 0 of N expected contacts.
Later commits such as 7fb0413baa7f (HID: wacom: Use "Confidence" flag to
prevent reporting invalid contacts) worked around the DTH-2452 issue by
skipping the invalid contacts at the end of the report, but this is not
a complete fix. The confidence flag cannot be relied on when a contact
is removed (see the following patch), and dealing with that condition
re-introduces the DTH-2452 issue unless we also address this contact
count laziness. By resetting expected and received counts at the same
time we ensure the driver understands that there are 0 more contacts
expected in the report. Similarly, we also make sure to reset the
received count if for some reason we're out of sync in the pre-report
phase.
Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: f8b6a74719b5 ("HID: wacom: generic: Support multiple tools per report")
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
