IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 665b9459bb53b8f19bd1541567e1fe9782c83c4b upstream.
The Samsung S5P/Exynos MIPI CSIS bindings and Linux driver expect first
clock name to be "csis". Otherwise the driver fails to probe.
Fixes: 94ad0f6d9278 ("ARM: dts: Add Device tree for s5pv210 SoC")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230212185818.43503-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c950c20da38debf1ed531e0b972bd8b53d1c11f upstream.
The WM8960 Linux driver expects the clock to be named "mclk". Otherwise
the clock will be ignored and not prepared/enabled by the driver.
Cc: <stable@vger.kernel.org>
Fixes: 339b2fb36a67 ("ARM: dts: exynos: Add TOPEET itop elite based board")
Link: https://lore.kernel.org/r/20230217150627.779764-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a622310f7f0185da02e42cdb06475f533efaae60 ]
OMAP processors support 32 channels but there is no check or
inspect this except booting a device and looking at dmesg reports
of not available channels.
Recently some more subsystems with DMA (aes1+2) were added filling
the list of dma channels beyond the limit of 32 (even if other
parameters indicate 96 or 128 channels). This leads to random
subsystem failures i(e.g. mcbsp for audio) after boot or boot
messages that DMA can not be initialized.
Another symptom is that
/sys/kernel/debug/dmaengine/summary
has 32 entries and does not show all required channels.
Fix by disabling unused (on the GTA04 hardware) mcspi1...4.
Each SPI channel allocates 4 DMA channels rapidly filling
the available ones.
Disabling unused SPI modules on the OMAP3 SoC may also save
some energy (has not been checked).
Fixes: c312f066314e ("ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
[re-enabled aes2, improved commit subject line]
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-Id: <20230113211151.2314874-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b16b34e491629016109e56747ad64588074194b ]
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x0fe00000, 0x31e00000, 0x35e00000) specified in the ranges property for
I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 93241840b664 ("ARM: dts: qcom: Add pcie nodes for ipq8064")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-17-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fafb7e5c041814876266259e5e439f93571dcef ]
The current value for pci IO is problematic for ath10k wifi card
commonly connected to ipq8064 SoC.
The current value is probably a typo and is actually uncommon to find
1MB IO space even on a x86 arch. Also with recent changes to the pci
driver, pci1 and pci2 now fails to function as any connected device
fails any reg read/write. Reduce this to 64K as it should be more than
enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT
hardcoded for the ARM arch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220707010943.20857-7-ansuelsmth@gmail.com
Stable-dep-of: 0b16b34e4916 ("ARM: dts: qcom: ipq8064: Fix the PCI I/O port range")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2540279e9a9e74fc880d1e4c83754ecfcbe290a0 ]
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes: 187519403273 ("ARM: dts: ipq4019: Add a few peripheral nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2e3d0e20d8456f876607a8af61fdb83dfbf98cb6 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: 1ac49427b566 ("ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9372eca505e7a19934d750b4b4c89a3652738e66 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property
is already defined in included exynosi5410.dtsi, drop it from
exynos5410-odroidxu.dts to fix the error and remoev redundancy.
Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33e2c595e2e4016991ead44933a29d1ef93d5f26 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Cc: <stable@vger.kernel.org>
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Link: https://lore.kernel.org/r/20230209105841.779596-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3583e92d188ec6c58c7f603ac5e72dd8a11c21a upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. This was not critical before,
but since rework of thermal Devicetree initialization in the
commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree
initialization"), this leads to errors registering thermal zones other
than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2
thermal_sys: Failed to find thermal zone for tmu id=0
exynos-tmu 10064000.tmu: Failed to register sensor: -2
exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e4505e617a80f601e2f53a917611777f128f925 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle.
Fixes: 328829a6ad70 ("ARM: dts: define default thermal-zones for exynos4")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 408ab6786dbf6dd696488054c9559681112ef994 upstream.
TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing
it must not have an argument to phandle. Since thermal-sensors property is
already defined in included exynos4-cpu-thermal.dtsi, drop it from
exynos4210.dtsi to fix the error and remoev redundancy.
Fixes: 9843a2236003 ("ARM: dts: Provide dt bindings identical for Exynos TMU")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230209105841.779596-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5d5aa219a790d61cad2c38e1aa32058f16ad2f0b ]
For some reason, the driver adding support for Exynos5420 MIPI phy
back in 2016 wasn't used on Exynos5420, which caused a kernel panic.
Add the proper compatible for it.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20230121201844.46872-2-markuss.broks@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2177d4ae971f79b4a9a3c411f2fb8ae6113d1430 ]
The property named in the schema is 'enable-gpios', not 'enable-gpio'.
This makes no difference at runtime, because the regulator is marked as
always-on, but it breaks validation.
Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231225854.16320-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d15d2a617499882971ddb773a583015bf36fa492 ]
The property is wr-active:
exynos3250-rinato.dtb: fimd@11c00000: i80-if-timings: 'wr-act' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: b59b3afb94d4 ("ARM: dts: add fimd device support for exynos3250-rinato")
Link: https://lore.kernel.org/r/20230120155404.323386-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80422339a75088322b4d3884bd12fa0fe5d11050 ]
The clocks in the Rockchip rk3288 DisplayPort node are
included in the power-domain@RK3288_PD_VIO logic, but the
power-domains property in the dp node is missing, so fix it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/dab85bfb-9f55-86a1-5cd5-7388c43e0ec5@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42825d1f269355d63554ab3c3762611e4d8053e9 ]
"make dtbs_check":
arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: $nodename:0: 'tca9548@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/vf610-zii-dev-rev-b.dtb: tca9548@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4' were unexpected)
From schema: /scratch/geert/linux/linux-renesas/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA9548 nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f78985f9f58380eec37f82c8a2c765aa7670fc29 ]
"make dtbs_check":
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm/boot/dts/imx53-ppd.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3', 'i2c@4', 'i2c@5', 'i2c@6', 'i2c@7' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
Fix this by renaming the PCA9547 node to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dfbc72256b5de608ad10989bcbafdbbd1ac8d4e ]
The following build warning is seen when running:
make dtbs_check DT_SCHEMA_FILES=fsl-imx-uart.yaml
arch/arm/boot/dts/imx6dl-gw560x.dtb: serial@2020000: rts-gpios: False schema does not allow [[20, 1, 0]]
From schema: Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
The imx6qdl-gw560x board does not expose the UART RTS and CTS
as native UART pins, so 'uart-has-rtscts' should not be used.
Using 'uart-has-rtscts' with 'rts-gpios' is an invalid combination
detected by serial.yaml.
Fix the problem by removing the incorrect 'uart-has-rtscts' property.
Fixes: b8a559feffb2 ("ARM: dts: imx: add Gateworks Ventana GW5600 support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4dd0845c4f1f5371f1e06fef0e4a1734a2db964 ]
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 8b646cfb84c3 ("ARM: dts: imx7d-pico: Add support for the dwarf baseboard")
Fixes: 6418fd92417f ("ARM: dts: imx7d-pico: Add support for the nymph baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94e2cf1e0db5b06c7a6ae0878c5cbec925819a8a ]
'clock_frequency' is not a valid property.
Use the correct 'clock-frequency' instead.
Fixes: 47246fafef84 ("ARM: dts: imx6ul-pico: Add support for the dwarf baseboard")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f87db2005f73876602211af0ee156817019b6bda ]
Switch port 6 is connected to eth0, so add appropriate device tree node for it.
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1f3e530c59a7e8c5f06172f4c28b945a6b4bfb8 ]
This allows bootloader to correctly pass MAC addresses used by bootloader
to individual interfaces into kernel device tree.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69236d2391b4d7324b11c3252921571577892e7b ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 538da83ddbea ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44f47b7a8fa4678ce4c38ea74837e4996b9df6d6 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 0d3d96ab0059 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 823956d2436f70ced74c0fe8ab99facd8abfc060 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 4de59085091f ("ARM: mvebu: add Device Tree description of the Armada 375 SoC")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eab276787f456cbea89fabea110fe0728673d308 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 9d8f44f02d4a ("arm: mvebu: add PCIe Device Tree informations for Armada XP")
Fixes: 12b69a599745 ("ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable")
Fixes: 2163e61c92d9 ("ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9208b0fa2e803d16b28d91bf1d46b7ee9ea13c6 ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: a09a0b7c6ff1 ("arm: mvebu: add PCIe Device Tree informations for Armada 370")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcc7d8c72b64a479b8017e4332d99179deb8802d ]
BDF of resource in DT assigned-addresses property of Marvell PCIe Root Port
(PCI-to-PCI bridge) should match BDF in address part in that DT node name
as specified resource belongs to Marvell PCIe Root Port itself.
Fixes: 74ecaa403a74 ("ARM: dove: add PCIe controllers to SoC DT")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0336e2ce34e7a89832b6c214f924eb7bc58940be ]
Interrupt 12 of the Interrupt controller belongs to the SMI controller,
the right one for the display controller is the interrupt 13.
Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5d577e3d50713ad11d98dbdaa48bb494346c26d ]
The WLAN regulator uses 'gpios' property instead of 'gpio' to specify
regulator enable GPIO. While the former is also currently handled by
the Linux kernel regulator-fixed driver, the later is the correct one
per DT bindings. Update the DT to use the later.
Fixes: 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b835f1b8acef53c8882b25f40f48d7f5982c938 ]
The Avenger96 is populated with STM32MP157A DHCOR SoM, drop the
stm32mp15xc.dtsi which should only be included in DTs of devices
which are populated with STM32MP15xC/F SoC as the stm32mp15xc.dtsi
enables CRYP block not present in the STM32MP15xA/D SoC .
Fixes: 7e76f82acd9e1 ("ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ef19964da8a668c683f1d38274f6fb756e047945 upstream.
This reverts commit 753395ea1e45c724150070b5785900b6a44bd5fb.
It introduced a boot regression on colibri-imx7, and potentially any
other i.MX7 boards with MTD partition list generated into the fdt by
U-Boot.
While the commit we are reverting here is not obviously wrong, it fixes
only a dt binding checker warning that is non-functional, while it
introduces a boot regression and there is no obvious fix ready.
Fixes: 753395ea1e45 ("ARM: dts: imx7: Fix NAND controller size-cells")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/Y4dgBTGNWpM6SQXI@francesco-nb.int.toradex.com/
Link: https://lore.kernel.org/all/20221205144917.6514168a@xps-13/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit da74858a475782a3f16470907814c8cc5950ad68 ]
The clock source and the sched_clock provided by the arm_global_timer
on Rockchip rk3066a/rk3188 are quite unstable because their rates
depend on the CPU frequency.
Recent changes to the arm_global_timer driver makes it impossible to use.
On the other side, the arm_global_timer has a higher rating than the
ROCKCHIP_TIMER, it will be selected by default by the time framework
while we want to use the stable Rockchip clock source.
Keep the arm_global_timer disabled in order to have the
DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/f275ca8d-fd0a-26e5-b978-b7f3df815e0a@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11871e20bcb23c00966e785a124fb72bc8340af4 ]
The lcdc1-rgb24 node name is out of line with the rest
of the rk3188 lcdc1 node, so fix it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/7b9c0a6f-626b-07e8-ae74-7e0f08b8d241@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd847fe34cdf1e89afed1af24986359f13082bfb ]
Fix ir-receiver node names on Rockchip boards,
so that they match with regex: '^ir(-receiver)?(@[a-f0-9]+)?$'
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/ea5af279-f44c-afea-023d-bb37f5a0d58d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17b57beafccb4569accbfc8c11390744cf59c021 ]
Fix the node name for hym8563 in all arm rockchip devicetrees.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20221024165549.74574-4-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e68be7b39f21d8a9291a5a3019787cd3ca999dd7 ]
make dtbs_check gives the following errors:
ref-clock-frequency: size (9) error for type uint32
tcxo-clock-frequency: size (9) error for type uint32
Fix it by passing the frequencies inside < > as documented in
Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes: 0d446a505592 ("ARM: dts: add Protonic PRTI6Q board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
