IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 6f195d6b0da3b689922ba9e302af2f49592fa9fc ]
The STM32MP1 keeps clk_rx enabled during suspend, and therefore the
driver does not enable the clock in stm32_dwmac_init() if the device was
suspended. The problem is that this same code runs on STM32 MCUs, which
do disable clk_rx during suspend, causing the clock to never be
re-enabled on resume.
This patch adds a variant flag to indicate that clk_rx remains enabled
during suspend, and uses this to decide whether to enable the clock in
stm32_dwmac_init() if the device was suspended.
This approach fixes this specific bug with limited opportunity for
unintended side-effects, but I have a follow up patch that will refactor
the clock configuration and hopefully make it less error prone.
Fixes: 6528e02cc9ff ("net: ethernet: stmmac: add adaptation for stm32mp157c.")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230927175749.1419774-1-ben.wolsieffer@hefring.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37d4f55567982e445f86dc0ff4ecfa72921abfe8 ]
This accidentally returns success, but it should return a negative error
code.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ccf50d4d4741e064ba35511a95402c63bbe21a8 ]
Since commit 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done
before HW reset") the following error is seen on a imx8mn board with
a 88E6320 switch:
mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done
This board does not have an EEPROM attached to the switch though.
This problem is well explained by Andrew Lunn:
"If there is an EEPROM, and the EEPROM contains a lot of data, it could
be that when we perform a hardware reset towards the end of probe, it
interrupts an I2C bus transaction, leaving the I2C bus in a bad state,
and future reads of the EEPROM do not work.
The work around for this was to poll the EEInt status and wait for it
to go true before performing the hardware reset.
However, we have discovered that for some boards which do not have an
EEPROM, EEInt never indicates complete. As a result,
mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a
warning.
We probably need a different solution than calling
mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the
EEPROM Command register:
bit 15 is:
EEPROM Unit Busy. This bit must be set to a one to start an EEPROM
operation (see EEOp below). Only one EEPROM operation can be
executing at one time so this bit must be zero before setting it to
a one. When the requested EEPROM operation completes this bit will
automatically be cleared to a zero. The transition of this bit from
a one to a zero can be used to generate an interrupt (the EEInt in
Global 1, offset 0x00).
and more interesting is bit 11:
Register Loader Running. This bit is set to one whenever the
register loader is busy executing instructions contained in the
EEPROM."
Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error
when the EEPROM chip is not present.
Fixes: 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 684e45e120b82deccaf8b85633905304a3bbf56d ]
On MT76x0, LNA gain should be applied for both external and internal LNA.
On MT76x2, LNA gain should be treated as 0 for external LNA.
Move the LNA type based logic to mt76x2 in order to fix mt76x0.
Fixes: 2daa67588f34 ("mt76x0: unify lna_gain parsing")
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230919194747.31647-1-nbd@nbd.name
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a59addacf899b1b21a7b7449a1c52c98704c2472 ]
Process the result of hdlc_open() and call uhdlc_close()
in case of an error. It is necessary to pass the error
code up the control flow, similar to a possible
error in request_irq().
Also add a hdlc_close() call to the uhdlc_close()
because the comment to hdlc_close() says it must be called
by the hardware driver when the HDLC device is being closed
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aef7a0300047e7b4707ea0411dc9597cba108fc8 ]
Only skip the code path trying to access the rfc1042 headers when the
buffer is too small, so the driver can still process packets without
rfc1042 headers.
Fixes: 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthew Wang <matthewmwang@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230908104308.1546501-1-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 424c82e8ad56756bb98b08268ffcf68d12d183eb ]
The iwl_fw_ini_error_dump_range structure has conflicting alignment
requirements for the inner union and the outer struct:
In file included from drivers/net/wireless/intel/iwlwifi/fw/dbg.c:9:
drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2: error: field within 'struct iwl_fw_ini_error_dump_range' is less aligned than 'union iwl_fw_ini_error_dump_range::(anonymous at drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2)' and is usually due to 'struct iwl_fw_ini_error_dump_range' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
union {
As the original intention was apparently to make the entire structure
unaligned, mark the innermost members the same way so the union
becomes packed as well.
Fixes: 973193554cae6 ("iwlwifi: dbg_ini: dump headers cleanup")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616090343.2454061-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eec679e4ac5f47507774956fb3479c206e761af7 upstream.
In a TLV encoding scheme, the Length part represents the length after
the header containing the values for type and length. In this case,
`tlv_len` should be:
tlv_len == (sizeof(*tlv_rxba) - 1) - sizeof(tlv_rxba->header) + tlv_bitmap_len
Notice that the `- 1` accounts for the one-element array `bitmap`, which
1-byte size is already included in `sizeof(*tlv_rxba)`.
So, if the above is correct, there is a double-counting of some members
in `struct mwifiex_ie_types_rxba_sync`, when `tlv_buf_left` and `tmp`
are calculated:
968 tlv_buf_left -= (sizeof(*tlv_rxba) + tlv_len);
969 tmp = (u8 *)tlv_rxba + tlv_len + sizeof(*tlv_rxba);
in specific, members:
drivers/net/wireless/marvell/mwifiex/fw.h:777
777 u8 mac[ETH_ALEN];
778 u8 tid;
779 u8 reserved;
780 __le16 seq_num;
781 __le16 bitmap_len;
This is clearly wrong, and affects the subsequent decoding of data in
`event_buf` through `tlv_rxba`:
970 tlv_rxba = (struct mwifiex_ie_types_rxba_sync *)tmp;
Fix this by using `sizeof(tlv_rxba->header)` instead of `sizeof(*tlv_rxba)`
in the calculation of `tlv_buf_left` and `tmp`.
This results in the following binary differences before/after changes:
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
| @@ -4698,11 +4698,11 @@
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:968
| tlv_buf_left -= (sizeof(tlv_rxba->header) + tlv_len);
| - 1da7: lea -0x11(%rbx),%edx
| + 1da7: lea -0x4(%rbx),%edx
| 1daa: movzwl %bp,%eax
| drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:969
| tmp = (u8 *)tlv_rxba + sizeof(tlv_rxba->header) + tlv_len;
| - 1dad: lea 0x11(%r15,%rbp,1),%r15
| + 1dad: lea 0x4(%r15,%rbp,1),%r15
The above reflects the desired change: avoid counting 13 too many bytes;
which is the total size of the double-counted members in
`struct mwifiex_ie_types_rxba_sync`:
$ pahole -C mwifiex_ie_types_rxba_sync drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o
struct mwifiex_ie_types_rxba_sync {
struct mwifiex_ie_types_header header; /* 0 4 */
|-----------------------------------------------------------------------
| u8 mac[6]; /* 4 6 */ |
| u8 tid; /* 10 1 */ |
| u8 reserved; /* 11 1 */ |
| __le16 seq_num; /* 12 2 */ |
| __le16 bitmap_len; /* 14 2 */ |
| u8 bitmap[1]; /* 16 1 */ |
|----------------------------------------------------------------------|
| 13 bytes|
-----------
/* size: 17, cachelines: 1, members: 7 */
/* last cacheline: 17 bytes */
} __attribute__((__packed__));
Fixes: 99ffe72cdae4 ("mwifiex: process rxba_sync event")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/06668edd68e7a26bbfeebd1201ae077a2a7a8bce.1692931954.git.gustavoars@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eea03d18af9c44235865a4bc9bec4d780ef6cf21 upstream.
The flexible structure (a structure that contains a flexible-array member
at the end) `qed_ll2_tx_packet` is nested within the second layer of
`struct qed_ll2_info`:
struct qed_ll2_tx_packet {
...
/* Flexible Array of bds_set determined by max_bds_per_packet */
struct {
struct core_tx_bd *txq_bd;
dma_addr_t tx_frag;
u16 frag_len;
} bds_set[];
};
struct qed_ll2_tx_queue {
...
struct qed_ll2_tx_packet cur_completing_packet;
};
struct qed_ll2_info {
...
struct qed_ll2_tx_queue tx_queue;
struct qed_ll2_cbs cbs;
};
The problem is that member `cbs` in `struct qed_ll2_info` is placed just
after an object of type `struct qed_ll2_tx_queue`, which is in itself
an implicit flexible structure, which by definition ends in a flexible
array member, in this case `bds_set`. This causes an undefined behavior
bug at run-time when dynamic memory is allocated for `bds_set`, which
could lead to a serious issue if `cbs` in `struct qed_ll2_info` is
overwritten by the contents of `bds_set`. Notice that the type of `cbs`
is a structure full of function pointers (and a cookie :) ):
include/linux/qed/qed_ll2_if.h:
107 typedef
108 void (*qed_ll2_complete_rx_packet_cb)(void *cxt,
109 struct qed_ll2_comp_rx_data *data);
110
111 typedef
112 void (*qed_ll2_release_rx_packet_cb)(void *cxt,
113 u8 connection_handle,
114 void *cookie,
115 dma_addr_t rx_buf_addr,
116 bool b_last_packet);
117
118 typedef
119 void (*qed_ll2_complete_tx_packet_cb)(void *cxt,
120 u8 connection_handle,
121 void *cookie,
122 dma_addr_t first_frag_addr,
123 bool b_last_fragment,
124 bool b_last_packet);
125
126 typedef
127 void (*qed_ll2_release_tx_packet_cb)(void *cxt,
128 u8 connection_handle,
129 void *cookie,
130 dma_addr_t first_frag_addr,
131 bool b_last_fragment, bool b_last_packet);
132
133 typedef
134 void (*qed_ll2_slowpath_cb)(void *cxt, u8 connection_handle,
135 u32 opaque_data_0, u32 opaque_data_1);
136
137 struct qed_ll2_cbs {
138 qed_ll2_complete_rx_packet_cb rx_comp_cb;
139 qed_ll2_release_rx_packet_cb rx_release_cb;
140 qed_ll2_complete_tx_packet_cb tx_comp_cb;
141 qed_ll2_release_tx_packet_cb tx_release_cb;
142 qed_ll2_slowpath_cb slowpath_cb;
143 void *cookie;
144 };
Fix this by moving the declaration of `cbs` to the middle of its
containing structure `qed_ll2_info`, preventing it from being
overwritten by the contents of `bds_set` at run-time.
This bug was introduced in 2017, when `bds_set` was converted to a
one-element array, and started to be used as a Variable Length Object
(VLO) at run-time.
Fixes: f5823fe6897c ("qed: Add ll2 option to limit the number of bds per packet")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/ZQ+Nz8DfPg56pIzr@work
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0b65f9b81fef180cf5f103adecbe5505c961153 upstream.
Alex reported that running ssh over IPv6 does not work with
Thunderbolt/USB4 networking driver. The reason for that is that driver
should call skb_is_gso() before calling skb_is_gso_v6(), and it should
not return false after calculates the checksum successfully. This probably
was a copy paste error from the original driver where it was done properly.
Reported-by: Alex Balcanquall <alex@alexbal.com>
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit edc0140cc3b7b91874ebe70eb7d2a851e8817ccc ]
bnxt_poll_nitroa0() invokes bnxt_rx_pkt() which can run a XDP program
which in turn can return XDP_REDIRECT. bnxt_rx_pkt() is also used by
__bnxt_poll_work() which flushes (xdp_do_flush()) the packets after each
round. bnxt_poll_nitroa0() lacks this feature.
xdp_do_flush() should be invoked before leaving the NAPI callback.
Invoke xdp_do_flush() after a redirect in bnxt_poll_nitroa0() NAPI.
Cc: Michael Chan <michael.chan@broadcom.com>
Fixes: f18c2b77b2e4e ("bnxt_en: optimized XDP_REDIRECT support")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 492032760127251e5540a5716a70996bacf2a3fd ]
Get a null-ptr-deref bug as follows with reproducer [1].
BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? vlan_dev_hard_header+0x35/0x140 [8021q]
? vlan_dev_hard_header+0x8e/0x140 [8021q]
neigh_connected_output+0xb2/0x100
ip6_finish_output2+0x1cb/0x520
? nf_hook_slow+0x43/0xc0
? ip6_mtu+0x46/0x80
ip6_finish_output+0x2a/0xb0
mld_sendpack+0x18f/0x250
mld_ifc_work+0x39/0x160
process_one_work+0x1e6/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0
When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.
Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0770063096d5da4a8e467b6e73c1646a75589628 ]
Currently the reset process in hns3 and firmware watchdog init process is
asynchronous. we think firmware watchdog initialization is completed
before hns3 clear the firmware interrupt source. However, firmware
initialization may not complete early.
so we add delay before hns3 clear firmware interrupt source and 5 ms delay
is enough to avoid second firmware reset interrupt.
Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2ed304922a55690529bcca59678dd92d7466ce8 ]
Currently, the driver will enable unicast promisc for the function
once configure mac address fail. It's unreasonable when the failure
is caused by using same mac address with other functions. So only
enable unicast promisc when mac table full.
Fixes: c631c696823c ("net: hns3: refactor the promisc mode setting")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0d362ffa33da4acdcf7aee2116ceef8c8fef658 ]
If port VLAN is configured on a VF then any other VLANs on top of this VF
are broken.
During i40e_ndo_set_vf_port_vlan() call the i40e driver reset the VF and
iavf driver asks PF (using VIRTCHNL_OP_GET_VF_RESOURCES) for VF capabilities
but this reset occurs too early, prior setting of vf->info.pvid field
and because this field can be zero during i40e_vc_get_vf_resources_msg()
then VIRTCHNL_VF_OFFLOAD_VLAN capability is reported to iavf driver.
This is wrong because iavf driver should not report VLAN offloading
capability when port VLAN is configured as i40e does not support QinQ
offloading.
Fix the issue by moving VF reset after setting of vf->port_vlan_id
field.
Without this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: on
tx-vlan-offload: on
$ dmesg -l err | grep iavf
[1292500.742914] iavf 0000:02:02.0: Failed to add VLAN filter, error IAVF_ERR_INVALID_QP_ID
With this patch:
$ echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
$ ip link set enp2s0f0 vf 0 vlan 3
$ ip link set enp2s0f0v0 up
$ ip link add link enp2s0f0v0 name vlan4 type vlan id 4
$ ip link set vlan4 up
...
$ ethtool -k enp2s0f0v0 | grep vlan-offload
rx-vlan-offload: off [requested on]
tx-vlan-offload: off [requested on]
$ dmesg -l err | grep iavf
Fixes: f9b4b6278d51 ("i40e: Reset the VF upon conflicting VLAN configuration")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fba360a047d5eeeb9d4b7c3a9b1c8308980ce9a6 ]
While technically some control frames like ACK are shorter and
end after Address 1, such frames shouldn't be forwarded through
wmediumd or similar userspace, so require the full 3-address
header to avoid accessing invalid memory if shorter frames are
passed in.
Reported-by: syzbot+b2645b5bf1512b81fa22@syzkaller.appspotmail.com
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a198c95c95da10ad844cbeade2fe40bdf14c411 ]
The following message shows up when compiling with W=1:
In function ‘fortify_memcpy_chk’,
inlined from ‘alx_get_ethtool_stats’ at drivers/net/ethernet/atheros/alx/ethtool.c:297:2:
./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to get alx stats altogether, alx_get_ethtool_stats() reads
beyond hw->stats.rx_ok. Fix this warning by directly copying hw->stats,
and refactor the unnecessarily complicated BUILD_BUG_ON btw.
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821013218.1614265-1-gongruiqi@huaweicloud.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ad8237e971630c66a1a6194491e0837b64d00e0 ]
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check_edma’ at drivers/net/wireless/ath/wil6210/txrx_edma.c:566:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
where the compiler complains on:
const u8 *pn;
...
pn = (u8 *)&st->ext.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);
and:
In function ‘fortify_memcpy_chk’,
inlined from ‘wil_rx_crypto_check’ at drivers/net/wireless/ath/wil6210/txrx.c:684:2:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
where the compiler complains on:
const u8 *pn = (u8 *)&d->mac.pn_15_0;
...
memcpy(cc->pn, pn, IEEE80211_GCMP_PN_LEN);
In both cases, the fortification logic interprets 'memcpy()' as 6-byte
overread of 2-byte field 'pn_15_0' of 'struct wil_rx_status_extension'
and 'pn_15_0' of 'struct vring_rx_mac', respectively. To silence
these warnings, last two fields of the aforementioned structures
are grouped using 'struct_group_attr(pn, __packed' quirk.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230621093711.80118-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcce94b80a954a8968ff29fafcfb066d6197fa9a ]
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘mwifiex_construct_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:765:3,
inlined from ‘mwifiex_send_tdls_action_frame’ at drivers/net/wireless/marvell/mwifiex/tdls.c:856:6:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The compiler actually complains on:
memmove(pos + ETH_ALEN, &mgmt->u.action.category,
sizeof(mgmt->u.action.u.tdls_discover_resp));
and it happens because the fortification logic interprets this
as an attempt to overread 1-byte 'u.action.category' member of
'struct ieee80211_mgmt'. To silence this warning, it's enough
to pass an address of 'u.action' itself instead of an address
of its first member.
This also fixes an improper usage of 'sizeof()'. Since 'skb' is
extended with 'sizeof(mgmt->u.action.u.tdls_discover_resp) + 1'
bytes (where 1 is actually 'sizeof(mgmt->u.action.category)'),
I assume that the same number of bytes should be copied.
Suggested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230629085115.180499-2-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061115fbfb2ce5870c9a004d68dc63138c07c782 ]
Smatch reports:
ath_pci_probe() warn: argument 4 to %lx specifier is cast from pointer
ath_ahb_probe() warn: argument 4 to %lx specifier is cast from pointer
Fix it by modifying %lx to %p in the printk format string.
Note that with this change, the pointer address will be printed as a
hashed value by default. This is appropriate because the kernel
should not leak kernel pointers to user space in an informational
message. If someone wants to see the real address for debugging
purposes, this can be achieved with the no_hash_pointers kernel option.
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230723040403.296723-1-dzm91@hust.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 810e41cebb6c6e394f2068f839e1a3fc745a5dcc ]
When compiling with gcc 13.1 and CONFIG_FORTIFY_SOURCE=y,
I've noticed the following:
In function ‘fortify_memcpy_chk’,
inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:556:4,
inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
inlined from ‘ath_tx_count_frames’ at drivers/net/wireless/ath/ath9k/xmit.c:473:3,
inlined from ‘ath_tx_complete_aggr’ at drivers/net/wireless/ath/ath9k/xmit.c:572:2,
inlined from ‘ath_tx_process_buffer’ at drivers/net/wireless/ath/ath9k/xmit.c:773:3:
./include/linux/fortify-string.h:529:25: warning: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
529 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In both cases, the compiler complains on:
memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3);
which is the legal way to copy both 'ba_low' and following 'ba_high'
members of 'struct ath_tx_status' at once (that is, issue one 8-byte
'memcpy()' for two 4-byte fields). Since the fortification logic seems
interprets this trick as an attempt to overread 4-byte 'ba_low', silence
relevant warnings by using the convenient 'struct_group()' quirk.
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230620080855.396851-2-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c44191dd76cf9c0cc49adaf34384cbd42ef8ad2 ]
The commit in fixes introduced flags to control the status of hardware
configuration while processing packets. At the same time another structure
is used to provide configuration of timestamper to user-space applications.
The way it was coded makes this structures go out of sync easily. The
repro is easy for 82599 chips:
[root@hostname ~]# hwstamp_ctl -i eth0 -r 12 -t 1
current settings:
tx_type 0
rx_filter 0
new settings:
tx_type 1
rx_filter 12
The eth0 device is properly configured to timestamp any PTPv2 events.
[root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1
current settings:
tx_type 1
rx_filter 12
SIOCSHWTSTAMP failed: Numerical result out of range
The requested time stamping mode is not supported by the hardware.
The error is properly returned because HW doesn't support all packets
timestamping. But the adapter->flags is cleared of timestamp flags
even though no HW configuration was done. From that point no RX timestamps
are received by user-space application. But configuration shows good
values:
[root@hostname ~]# hwstamp_ctl -i eth0
current settings:
tx_type 1
rx_filter 12
Fix the issue by applying new flags only when the HW was actually
configured.
Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7b8d60b37237680009dd0b025fe8c067aba0ee3 ]
According to the document of napi, there is no rx process when the
budget is 0. Therefore, r8152_poll() has to return 0 directly when the
budget is equal to 0.
Fixes: d2187f8e4454 ("r8152: divide the tx and rx bottom functions")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4c79810755f66c9a933ca810da2724133b1165a ]
rule_locs is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rule_locs to avoid NULL pointer dereference.
Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51fe0a470543f345e3c62b6798929de3ddcedc1d ]
rules is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rules to avoid OOB writing or NULL pointer dereference.
Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 674d9591a32d01df75d6b5fffed4ef942a294376 ]
When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.
Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 894cafc5c62ccced758077bd4e970dc714c42637 ]
After running command [2] too many times in a row:
[1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
[2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \
idleslope 120000 sendslope -880000 locredit -1320 hicredit 180
(aka more than priv->info->num_cbs_shapers times)
we start seeing the following error message:
Error: Specified device failed to setup cbs hardware offload.
This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents
the same API for the qdisc create and replace cases, and the sja1105
driver fails to distinguish between the 2. Thus, it always thinks that
it must allocate the same shaper for a {port, queue} pair, when it may
instead have to replace an existing one.
Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 954ad9bf13c4f95a4958b5f8433301f2ab99e1f5 ]
More careful measurement of the tc-cbs bandwidth shows that the stream
bandwidth (effectively idleslope) increases, there is a larger and
larger discrepancy between the rate limit obtained by the software
Qdisc, and the rate limit obtained by its offloaded counterpart.
The discrepancy becomes so large, that e.g. at an idleslope of 40000
(40Mbps), the offloaded cbs does not actually rate limit anything, and
traffic will pass at line rate through a 100 Mbps port.
The reason for the discrepancy is that the hardware documentation I've
been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states
about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which
the credit counter is increased".
Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf
(for SJA1110), the wording is different: "This field specifies the
value, in bytes per second times link speed, by which the credit counter
is increased".
So there's an extra scaling for link speed that the driver is currently
not accounting for, and apparently (empirically), that link speed is
expressed in Kbps.
I've pondered whether to pollute the sja1105_mac_link_up()
implementation with CBS shaper reprogramming, but I don't think it is
worth it. IMO, the UAPI exposed by tc-cbs requires user space to
recalculate the sendslope anyway, since the formula for that depends on
port_transmit_rate (see man tc-cbs), which is not an invariant from tc's
perspective.
So we use the offload->sendslope and offload->idleslope to deduce the
original port_transmit_rate from the CBS formula, and use that value to
scale the offload->sendslope and offload->idleslope to values that the
hardware understands.
Some numerical data points:
40Mbps stream, max interfering frame size 1500, port speed 100M
---------------------------------------------------------------
tc-cbs parameters:
idleslope 40000 sendslope -60000 locredit -900 hicredit 600
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 600 600
credit_lo 900 900
send_slope 7500000 75
idle_slope 5000000 50
40Mbps stream, max interfering frame size 1500, port speed 1G
-------------------------------------------------------------
tc-cbs parameters:
idleslope 40000 sendslope -960000 locredit -1440 hicredit 60
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 60 60
credit_lo 1440 1440
send_slope 120000000 120
idle_slope 5000000 5
5.12Mbps stream, max interfering frame size 1522, port speed 100M
-----------------------------------------------------------------
tc-cbs parameters:
idleslope 5120 sendslope -94880 locredit -1444 hicredit 77
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 77 77
credit_lo 1444 1444
send_slope 11860000 118
idle_slope 640000 6
Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps.
Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Reported-by: Yanan Yang <yanan.yang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6319685bdc8ad5310890add907b7c42f89302886 ]
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb devices can use as low as 64 descriptors.
This change will unify igb with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8360717524a24a421c36ef8eb512406dbd42160a ]
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igbvf devices can use as low as 64 descriptors.
This change will unify igbvf with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes: d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5aa48279712e1f134aac908acde4df798955a955 ]
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igc devices can use as low as 64 descriptors.
This change will unify igc with other drivers.
Based on commit 7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 151e887d8ff97e2e42110ffa1fb1e6a2128fb364 ]
The veth_xmit function returns NETDEV_TX_OK even when packets are dropped.
This behavior leads to incorrect calculations of statistics counts, as
well as things like txq->trans_start updates.
Fixes: e314dbdc1c0d ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa09bc40b21a33937872c4c4cf0f266ec9fa4869 ]
Disable virtualization features on 82580 just as on i210/i211.
This avoids that virt functions are acidentally called on 82850.
Fixes: 55cac248caa4 ("igb: Add full support for 82580 devices")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bb5ed01cd2428cd25b1c88a3a9cba87055eb289f upstream.
Increase the RX buffer size to 3K when the SBP bit is on. The size of
the RX buffer determines the number of pages allocated which may not
be sufficient for receive frames larger than the set MTU size.
Cc: stable@vger.kernel.org
Fixes: 89eaefb61dc9 ("igb: Support RX-ALL feature flag.")
Reported-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f139492a09f15254fa261245cdbd65555cdf39e3 ]
Don't assume that only the driver would be accessing LNKCTL. ASPM policy
changes can trigger write to LNKCTL outside of driver's control.
Use RMW capability accessors which does proper locking to avoid losing
concurrent updates to the register value. On restore, clear the ASPMC field
properly.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 76d870ed09ab ("ath10k: enable ASPM")
Link: https://lore.kernel.org/r/20230717120503.15276-11-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30de872537bda526664d7a20b646adfb3e7ce6e6 ]
Don't assume that only the driver would be accessing LNKCTL of the upstream
bridge. ASPM policy changes can trigger write to LNKCTL outside of driver's
control.
Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event")
Link: https://lore.kernel.org/r/20230717120503.15276-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7248f1cc835bd80e936dc5b2d94b149bdd0077d ]
Maximum size of buffer is obtained from underlying I2C adapter and in
case adapter allows I2C transaction buffer size greater than 100 bytes,
transaction will fail due to firmware limitation.
As a result driver will fail initialization.
Limit the maximum size of transaction buffer by 100 bytes to fit to
firmware.
Remove unnecessary calculation:
max_t(u16, MLXSW_I2C_BLK_DEF, quirk_size).
This condition can not happened.
Fixes: 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 146c7c330507c0384bf29d567186632bfe975927 ]
The driver reads commands output from the output mailbox. If the size
of the output mailbox is not a multiple of the transaction /
block size, then the driver will not issue enough read transactions
to read the entire output, which can result in driver initialization
errors.
Fix by determining the number of transactions using DIV_ROUND_UP().
Fixes: 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 786c96e92fb9e854cb8b0cb7399bb2fb28e15c4b ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
local_irq_disable(). Compile tested only.
Fixes: 05fcd31cc472 ("arcnet: add err_skb package for package status feedback")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e4134610d93271535ecf900a676e1f094e9944c ]
The debugfs_create_dir() function returns error pointers,
it never returns NULL. Most incorrect error checks were fixed,
but the one in ath9k_htc_init_debug() was forgotten.
Fix the remaining error check.
Fixes: e5facc75fa91 ("ath9k_htc: Cleanup HTC debugfs")
Signed-off-by: Wang Ming <machel@vivo.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230713030358.12379-1-machel@vivo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35a7a1ce7c7d61664ee54f5239a1f120ab95a87e ]
In 'mwifiex_handle_uap_rx_forward()', always check the value
returned by 'skb_copy()' to avoid potential NULL pointer
dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop
original skb in case of copying failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 838e4f449297 ("mwifiex: improve uAP RX handling")
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 454994cfa9e4c18b6df9f78b60db8eadc20a6c25 ]
If ath9k_wmi_cmd() has exited with a timeout, it is possible that during
next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command
writes to new wmi->cmd_rsp_buf and makes a completion. This results in an
invalid ath9k_wmi_cmd() return value.
Move the replacement of WMI command response buffer and length under
wmi_lock. Note that last_seq_id value is updated there, too.
Thus, the buffer cannot be written to by a belated wmi_rsp callback
because that path is properly rejected by the last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-2-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b674fb513e2e7a514fcde287c0f73915d393fdb6 ]
Currently, the synchronization between ath9k_wmi_cmd() and
ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being
rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd().
Consider the following scenario:
CPU0 CPU1
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
ath9k_wmi_cmd_issue(...)
wait_for_completion_timeout(...)
---
timeout
---
/* the callback is being processed
* before last_seq_id became zero
*/
ath9k_wmi_ctrl_rx(...)
spin_lock_irqsave(...)
/* wmi->last_seq_id check here
* doesn't detect timeout yet
*/
spin_unlock_irqrestore(...)
/* last_seq_id is zeroed to
* indicate there was a timeout
*/
wmi->last_seq_id = 0
mutex_unlock(&wmi->op_mutex)
return -ETIMEDOUT
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
/* the buffer is replaced with
* another one
*/
wmi->cmd_rsp_buf = rsp_buf
wmi->cmd_rsp_len = rsp_len
ath9k_wmi_cmd_issue(...)
spin_lock_irqsave(...)
spin_unlock_irqrestore(...)
wait_for_completion_timeout(...)
/* the continuation of the
* callback left after the first
* ath9k_wmi_cmd call
*/
ath9k_wmi_rsp_callback(...)
/* copying data designated
* to already timeouted
* WMI command into an
* inappropriate wmi_cmd_buf
*/
memcpy(...)
complete(&wmi->cmd_wait)
/* awakened by the bogus callback
* => invalid return result
*/
mutex_unlock(&wmi->op_mutex)
return 0
To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd()
under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside
ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for
initially designated wmi_cmd call, otherwise the path would be rejected
with last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1e8a142c43336e3d25bfa1cb3a4ae7d00875c48 ]
Allow task's event buffer to be filled also in the case that it's size
is exactly the size of the message.
Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 288c63d5cb4667a51a04668b3e2bb0ea499bc5f4 ]
Add missing 'kfree_skb()' in 'mwifiex_init_rxq_ring()' and never do
'kfree(card->rxbd_ring_vbase)' because this area is DMAed and should
be released with 'dma_free_coherent()'. The latter is performed in
'mwifiex_pcie_delete_rxbd_ring()', which is now called to recover
from possible errors in 'mwifiex_pcie_create_rxbd_ring()'. Likewise
for 'mwifiex_pcie_init_evt_ring()', 'kfree(card->evtbd_ring_vbase)'
'mwifiex_pcie_delete_evtbd_ring()' and 'mwifiex_pcie_create_rxbd_ring()'.
Fixes: d930faee141b ("mwifiex: add support for Marvell pcie8766 chipset")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230731074334.56463-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11958528161731c58e105b501ed60b83a91ea941 ]
Make sure mwifiex_process_mgmt_packet,
mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet,
mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet
not out-of-bounds access the skb->data buffer.
Fixes: 2dbaf751b1de ("mwifiex: report received management frames to cfg80211")
Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com>
Reviewed-by: Matthew Wang <matthewmwang@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230723070741.1544662-1-pinkperfect2021@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ]
In case of an RX overflow error from the CAN controller and an OOM
where no skb can be allocated, the error counters are not incremented.
Fix this by first incrementing the error counters and then allocate
the skb.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-7-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
