IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This reverts commit 48e11e7c81b91002a120a513312a4de9f5ba7f08 which is
commit a33d700e8eea76c62120cb3dbf5e01328f18319a upstream.
It was applied to the incorrect function as the original function the
commit changed is not in this kernel branch.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lore.kernel.org/r/f23affddab4d8b3cc07508f2d8735d88d823821d.camel@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5260bd6d36c83c5b269c33baaaf8c78e520908b0 upstream.
This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83.
d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided
Secondary Bus Reset on the T4 because the reset seemed to not work when the
T4 was directly attached to a Root Port.
But NVIDIA thinks the issue is probably related to some issue with the Root
Port, not with the T4. The T4 provides neither PM nor FLR reset, so
masking bus reset compromises this device for assignment scenarios.
Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR
broken in the specific configuration Wu tested, as it was in v6.5, so Wu
will debug that further.
Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba
Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e09060b3b6b4661278ff8e1b7b81a37d5ea86eae ]
Don't assume that the device is fully under the control of ASPM and use RMW
capability accessors which do proper locking to avoid losing concurrent
updates to the register values.
If configuration fails in pcie_aspm_configure_common_clock(), the
function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store
only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather
than the content of the whole LNKCTL registers. It aligns better with
how pcie_lnkctl_clear_and_set() expects its parameter and makes the
code more obvious to understand.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 2a42d9dba784 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch")
Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230717120503.15276-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f75f96c61039151c193775d776fde42477eace1 ]
As hotplug is not the only driver touching LNKCTL, use the RMW capability
accessor which handles concurrent changes correctly.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 7f822999e12a ("PCI: pciehp: Add Disable/enable link functions")
Link: https://lore.kernel.org/r/20230717120503.15276-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5af729dc2071273f14cbb94abbc60608142fd83 ]
NVIDIA T4 GPUs do not work with SBR. This problem is found when the T4 card
is direct attached to a Root Port only. Avoid bus reset by marking T4 GPUs
PCI_DEV_FLAGS_NO_BUS_RESET.
Fixes: 4c207e7121fa ("PCI: Mark some NVIDIA GPUs to avoid bus reset")
Link: https://lore.kernel.org/r/2dcebea53a6eb9bd212ec6d8974af2e5e0333ef6.1681129861.git.wuzongyong@linux.alibaba.com
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cc22522fd55e257c86d340ae9aedc122e705a435 upstream.
40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources()
which depends on bridge being available, however enable_slot() can be
called without bridge associated:
1. Legitimate case of hotplug on root bus (widely used in virt world)
2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to
non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at
enable_slot(..., bridge = 0) where bus has no bridge assigned to it.
acpihp doesn't know that it's a bridge, and bus specific 'PCI
subsystem' can't augment ACPI context with bridge information since
the PCI device to get this data from is/was not available.
Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI
hotplug on hostbridge slots. To reproduce, boot kernel at commit
40613da52b13 in VM started with following CLI (assuming guest root fs is
installed on sda1 partition):
# qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \
-monitor stdio -serial file:serial.log \
-kernel arch/x86/boot/bzImage \
-append "root=/dev/sda1 console=ttyS0" \
guest_disk.img
Once guest OS is fully booted at qemu prompt:
(qemu) device_add e1000
(check serial.log) it will cause NULL pointer dereference at:
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
{
struct pci_bus *parent = bridge->subordinate;
BUG: kernel NULL pointer dereference, address: 0000000000000018
? pci_assign_unassigned_bridge_resources+0x1f/0x260
enable_slot+0x21f/0x3e0
acpiphp_hotplug_notify+0x13d/0x260
acpi_device_hotplug+0xbc/0x540
acpi_hotplug_work_fn+0x15/0x20
process_one_work+0x1f7/0x370
worker_thread+0x45/0x3b0
The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following
sequence:
1. Suspend to RAM
2. Wake up with the same backtrace being observed:
3. 2nd suspend to RAM attempt makes laptop freeze
Fix it by using __pci_bus_assign_resources() instead of
pci_assign_unassigned_bridge_resources() as we used to do, but only in case
when bus doesn't have a bridge associated (to cover for the case of ACPI
event on hostbridge or non existing root port).
That lets us keep hotplug on root bus working like it used to and at the
same time keeps resource reassignment usable on root ports (and other 1st
level bridges) that was fixed by 40613da52b13.
Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 ]
When using ACPI PCI hotplug, hotplugging a device with large BARs may fail
if bridge windows programmed by firmware are not large enough.
Reproducer:
$ qemu-kvm -monitor stdio -M q35 -m 4G \
-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=on \
-device id=rp1,pcie-root-port,bus=pcie.0,chassis=4 \
disk_image
wait till linux guest boots, then hotplug device:
(qemu) device_add qxl,bus=rp1
hotplug on guest side fails with:
pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff]
pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x001f]
pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff]
pci 0000:01:00.0: BAR 3: assigned [io 0x1000-0x101f]
qxl 0000:01:00.0: enabling device (0000 -> 0003)
Unable to create vram_mapping
qxl: probe of 0000:01:00.0 failed with error -12
However when using native PCIe hotplug
'-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off'
it works fine, since kernel attempts to reassign unused resources.
Use the same machinery as native PCIe hotplug to (re)assign resources.
Link: https://lore.kernel.org/r/20230424191557.2464760-1-imammedo@redhat.com
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 205b3d02d57ce6dce96f6d2b9c230f56a9bf9817 ]
Add check to fix the possible array out of bounds violation by
making speed equal to GEN1_CORE_CLK_FREQ when its value is more
than the size of "pcie_gen_freq" array. This array has size of
four but possible speed (CLS) values are from "0 to 0xF". So,
"speed - 1" values are "-1 to 0xE".
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/lkml/72b9168b-d4d6-4312-32ea-69358df2f2d0@nvidia.com/
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7e39756363ad5bd83ddeae1063193d0f13870fd ]
PCIe r6.0.1, sec 7.5.3.7, recommends setting the link control parameters,
then waiting for the Link Training bit to be clear before setting the
Retrain Link bit.
This avoids a race where the LTSSM may not use the updated parameters if it
is already in the midst of link training because of other normal link
activity.
Wait for the Link Training bit to be clear before toggling the Retrain Link
bit to ensure that the LTSSM uses the updated link control parameters.
[bhelgaas: commit log, return 0 (success)/-ETIMEDOUT instead of bool for
both pcie_wait_for_retrain() and the existing pcie_retrain_link()]
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5297a01ee805d7fa569d288ed65fc0f9ac9b03d ]
"pcie_retrain_link" is not a question with a true/false answer, so "bool"
isn't quite the right return type. Return 0 for success or -ETIMEDOUT if
the retrain failed. No functional change intended.
[bhelgaas: based on Ilpo's patch below]
Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Stable-dep-of: e7e39756363a ("PCI/ASPM: Avoid link retraining race")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7e6689b34a815bd379dfdbe9855d36f395ef056c upstream.
The address translation unit of the rockchip EP controller does not use
the lower 8 bits of a PCIe-space address to map local memory. Thus we
must set the align feature field to 256 to let the user know about this
constraint.
Link: https://lore.kernel.org/r/20230418074700.1083505-12-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8962b2cb39119cbda4fc69a1f83957824f102f81 upstream.
Previously u16 variables were used to access 32-bit registers, this
resulted in not all of the data being read from the registers. Also
the left shift of more than 16-bits would result in moving data out
of the variable. Use u32 variables to access 32-bit registers
Link: https://lore.kernel.org/r/20230418074700.1083505-10-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 166e89d99dd85a856343cca51eee781b793801f2 upstream.
Fix legacy IRQ generation for RK3399 PCIe endpoint core according to
the technical reference manual (TRM). Assert and deassert legacy
interrupt (INTx) through the legacy interrupt control register
("PCIE_CLIENT_LEGACY_INT_CTRL") instead of manually generating a PCIe
message. The generation of the legacy interrupt was tested and validated
with the PCIe endpoint test driver.
Link: https://lore.kernel.org/r/20230418074700.1083505-8-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dd3c7c4c8c3f7f010d9cdb7c3f42506d93c9527 upstream.
The RK3399 PCIe controller should wait until the PHY PLLs are locked.
Add poll and timeout to wait for PHY PLLs to be locked. If they cannot
be locked generate error message and jump to error handler. Accessing
registers in the PHY clock domain when PLLs are not locked causes hang
The PHY PLLs status is checked through a side channel register.
This is documented in the TRM section 17.5.8.1 "PCIe Initialization
Sequence".
Link: https://lore.kernel.org/r/20230418074700.1083505-5-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f1c42ece18de365c976a060f3c8eb481b038e3a upstream.
Write PCI Device ID (DID) to the correct register. The Device ID was not
updated through the correct register. Device ID was written to a read-only
register and therefore did not work. The Device ID is now set through the
correct register. This is documented in the RK3399 TRM section 17.6.6.1.1
Link: https://lore.kernel.org/r/20230418074700.1083505-3-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f397fd4ac1fa3afcabd8cee030f953ccaed2a364 upstream.
Assert PCI Configuration Enable bit after probe. When this bit is left to
0 in the endpoint mode, the RK3399 PCIe endpoint core will generate
configuration request retry status (CRS) messages back to the root complex.
Assert this bit after probe to allow the RK3399 PCIe endpoint core to reply
to configuration requests from the root complex.
This is documented in section 17.5.8.1.2 of the RK3399 TRM.
Link: https://lore.kernel.org/r/20230418074700.1083505-4-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a33d700e8eea76c62120cb3dbf5e01328f18319a upstream.
In the post init sequence of v2.9.0, write access to read only registers
are not disabled after updating the registers. Fix it by disabling the
access after register update.
Link: https://lore.kernel.org/r/20230619150408.8468-2-manivannan.sadhasivam@linaro.org
Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e30fd26f43b89cb6b4e850a86caa2e50dedb454 upstream.
The quirk for Elo i2 introduced in commit 92597f97a40b ("PCI/PM: Avoid
putting Elo i2 PCIe Ports in D3cold") is also needed by EloPOS E2/S2/H2
which uses the same Continental Z2 board.
Change the quirk to match the board instead of system.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215715
Link: https://lore.kernel.org/r/20230614074253.22318-1-linux@zary.sk
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c60738de85f40b0b9f5cb23c21f9246e5a47908c ]
Smatch reported:
1. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'clk' from clk_prepare_enable() not released on lines: 442,451,462,478,512,517.
2. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn:
'p->bus_clk' from clk_prepare_enable() not released on lines: 451,462,478,512,517.
The clock resource is obtained by devm_clk_get(), and then
clk_prepare_enable() makes the clock resource ready for use. After that,
clk_disable_unprepare() should be called to release the clock resource
when it is no longer needed. However, while doing some error handling
in faraday_pci_probe(), clk_disable_unprepare() is not called to release
clk and p->bus_clk before returning. These return lines are exactly 442,
451, 462, 478, 512, 517.
Fix this warning by replacing devm_clk_get() with devm_clk_get_enabled(),
which is equivalent to devm_clk_get() + clk_prepare_enable(). And with
devm_clk_get_enabled(), the clock will automatically be disabled,
unprepared and freed when the device is unbound from the bus.
Link: https://lore.kernel.org/r/20230508043641.23807-1-yejunyan@hust.edu.cn
Fixes: b3c433efb8a3 ("PCI: faraday: Fix wrong pointer passed to PTR_ERR()")
Fixes: 2eeb02b28579 ("PCI: faraday: Add clock handling")
Fixes: 783a862563f7 ("PCI: faraday: Use pci_parse_request_of_pci_ranges()")
Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver")
Fixes: f1e8bd21e39e ("PCI: faraday: Convert IRQ masking to raw PCI config accessors")
Signed-off-by: Junyan Ye <yejunyan@hust.edu.cn>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8afd0d9fccc27c8ad263db5cf5952cfcf72d6fe ]
If a PCIe hotplug slot has an Attention Button, the normal hot-add flow is:
- Slot is empty and slot power is off
- User inserts card in slot and presses Attention Button
- OS blinks Power Indicator for 5 seconds
- After 5 seconds, OS turns on Power Indicator, turns on slot power, and
enumerates the device
Previously, if a user pressed the Attention Button on an *empty* slot,
pciehp logged the following messages and blinked the Power Indicator
until a second button press:
[0.000] pciehp: Button press: will power on in 5 sec
[0.001] # Power Indicator starts blinking
[5.001] # 5 second timeout; slot is empty, so we should cancel the
request to power on and turn off Power Indicator
[7.000] # Power Indicator still blinking
[8.000] # possible card insertion
[9.000] pciehp: Button press: canceling request to power on
The first button press incorrectly left the slot in BLINKINGON_STATE, so
the second was interpreted as a "cancel power on" event regardless of
whether a card was present.
If the slot is empty, turn off the Power Indicator and return from
BLINKINGON_STATE to OFF_STATE after 5 seconds, effectively canceling the
request to power on. Putting the slot in OFF_STATE also means the second
button press will correctly request a slot power on if the slot is
occupied.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230512021518.336460-1-clementwei90@163.com
Fixes: d331710ea78f ("PCI: pciehp: Become resilient to missed events")
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 456d8aa37d0f56fc9e985e812496e861dcd6f2f2 ]
Struct pcie_link_state->downstream is a pointer to the pci_dev of function
0. Previously we retained that pointer when removing function 0, and
subsequent ASPM policy changes dereferenced it, resulting in a
use-after-free warning from KASAN, e.g.:
# echo 1 > /sys/bus/pci/devices/0000:03:00.0/remove
# echo powersave > /sys/module/pcie_aspm/parameters/policy
BUG: KASAN: slab-use-after-free in pcie_config_aspm_link+0x42d/0x500
Call Trace:
kasan_report+0xae/0xe0
pcie_config_aspm_link+0x42d/0x500
pcie_aspm_set_policy+0x8e/0x1a0
param_attr_store+0x162/0x2c0
module_attr_store+0x3e/0x80
PCIe spec r6.0, sec 7.5.3.7, recommends that software program the same ASPM
Control value in all functions of multi-function devices.
Disable ASPM and free the pcie_link_state when any child function is
removed so we can discard the dangling pcie_link_state->downstream pointer
and maintain the same ASPM Control configuration for all functions.
[bhelgaas: commit log and comment]
Debugged-by: Zongquan Qin <qinzongquan@sangfor.com.cn>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Fixes: b5a0a9b59c81 ("PCI/ASPM: Read and set up L1 substate capabilities")
Link: https://lore.kernel.org/r/20230507034057.20970-1-dinghui@sangfor.com.cn
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e12f830236928b6fadf40d917a7527f0a048d2f ]
The Link Retraining process is initiated to account for the Gen2 defect in
the Cadence PCIe controller in J721E SoC. The errata corresponding to this
is i2085, documented at:
https://www.ti.com/lit/er/sprz455c/sprz455c.pdf
The existing workaround implemented for the errata waits for the Data Link
initialization to complete and assumes that the link retraining process
at the Physical Layer has completed. However, it is possible that the
Physical Layer training might be ongoing as indicated by the
PCI_EXP_LNKSTA_LT bit in the PCI_EXP_LNKSTA register.
Fix the existing workaround, to ensure that the Physical Layer training
has also completed, in addition to the Data Link initialization.
Link: https://lore.kernel.org/r/20230315070800.1615527-1-s-vadapalli@ti.com
Fixes: 4740b969aaf5 ("PCI: cadence: Retrain Link to work around Gen2 training defect")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2738d5ab7929a845b654cd171a1e275c37eb428e upstream.
When the host tries to remove a PCI device, the host first sends a
PCI_EJECT message to the guest, and the guest is supposed to gracefully
remove the PCI device and send a PCI_EJECTION_COMPLETE message to the host;
the host then sends a VMBus message CHANNELMSG_RESCIND_CHANNELOFFER to
the guest (when the guest receives this message, the device is already
unassigned from the guest) and the guest can do some final cleanup work;
if the guest fails to respond to the PCI_EJECT message within one minute,
the host sends the VMBus message CHANNELMSG_RESCIND_CHANNELOFFER and
removes the PCI device forcibly.
In the case of fast device addition/removal, it's possible that the PCI
device driver is still configuring MSI-X interrupts when the guest receives
the PCI_EJECT message; the channel callback calls hv_pci_eject_device(),
which sets hpdev->state to hv_pcichild_ejecting, and schedules a work
hv_eject_device_work(); if the PCI device driver is calling
pci_alloc_irq_vectors() -> ... -> hv_compose_msi_msg(), we can break the
while loop in hv_compose_msi_msg() due to the updated hpdev->state, and
leave data->chip_data with its default value of NULL; later, when the PCI
device driver calls request_irq() -> ... -> hv_irq_unmask(), the guest
crashes in hv_arch_irq_unmask() due to data->chip_data being NULL.
Fix the issue by not testing hpdev->state in the while loop: when the
guest receives PCI_EJECT, the device is still assigned to the guest, and
the guest has one minute to finish the device removal gracefully. We don't
really need to (and we should not) test hpdev->state in the loop.
Fixes: de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-3-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit add9195e69c94b32e96f78c2f9cea68f0e850b3f upstream.
The hpdev->state is never really useful. The only use in
hv_pci_eject_device() and hv_eject_device_work() is not really necessary.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-4-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a847234e24d03d01a9566d1d9dcce018cc018d67 upstream.
This reverts commit d6af2ed29c7c1c311b96dac989dcb991e90ee195.
The statement "the hv_pci_bus_exit() call releases structures of all its
child devices" in commit d6af2ed29c7c is not true: in the path
hv_pci_probe() -> hv_pci_enter_d0() -> hv_pci_bus_exit(hdev, true): the
parameter "keep_devs" is true, so hv_pci_bus_exit() does *not* release the
child "struct hv_pci_dev *hpdev" that is created earlier in
pci_devices_present_work() -> new_pcichild_device().
The commit d6af2ed29c7c was originally made in July 2020 for RHEL 7.7,
where the old version of hv_pci_bus_exit() was used; when the commit was
rebased and merged into the upstream, people didn't notice that it's
not really necessary. The commit itself doesn't cause any issue, but it
makes hv_pci_probe() more complicated. Revert it to facilitate some
upcoming changes to hv_pci_probe().
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Wei Hu <weh@microsoft.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-5-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 440b5e3663271b0ffbd4908115044a6a51fb938b upstream.
Since day 1 of the driver, there has been a race between
hv_pci_query_relations() and survey_child_resources(): during fast
device hotplug, hv_pci_query_relations() may error out due to
device-remove and the stack variable 'comp' is no longer valid;
however, pci_devices_present_work() -> survey_child_resources() ->
complete() may be running on another CPU and accessing the no-longer-valid
'comp'. Fix the race by flushing the workqueue before we exit from
hv_pci_query_relations().
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230615044451.5580-2-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c441b1e03da6c680a3e12da59c554f454f2ccf5e ]
During EDR recovery, the OS must clear error status of the port that
triggered DPC even if firmware retains control of DPC and AER (see the
implementation note in the PCI Firmware spec r3.3, sec 4.6.12).
Prior to 068c29a248b6 ("PCI/ERR: Clear PCIe Device Status errors only if
OS owns AER"), the port Device Status was cleared in this path:
edr_handle_event
dpc_process_error(dev) # "dev" triggered DPC
pcie_do_recovery(dev, dpc_reset_link)
dpc_reset_link # exit DPC
pcie_clear_device_status(dev) # clear Device Status
After 068c29a248b6, pcie_do_recovery() no longer clears Device Status when
firmware controls AER, so the error bit remains set even after recovery.
Per the "Downstream Port Containment configuration control" bit in the
returned _OSC Control Field (sec 4.5.1), the OS is allowed to clear error
status until it evaluates _OST, so clear Device Status in
edr_handle_event() if the error recovery was successful.
[bhelgaas: commit log]
Fixes: 068c29a248b6 ("PCI/ERR: Clear PCIe Device Status errors only if OS owns AER")
Link: https://lore.kernel.org/r/20230315235449.1279209-1-sathyanarayanan.kuppuswamy@linux.intel.com
Reported-by: Tsaur Erwin <erwin.tsaur@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f5ac460dfe7f4e11f99de9870f240e39189cf72 ]
commit bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller")
added a fault hook to this driver in the probe function. So it was only
installed if needed.
commit bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO")
moved it from probe to driver init which installs the hook unconditionally
as soon as the driver is compiled into a kernel.
When this driver is compiled as a module, the hook is not registered
until after the driver has been matched with a .compatible and
loaded.
commit 415b6185c541 ("PCI: imx6: Fix config read timeout handling")
extended the fault handling code.
commit 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ")
added some protection for non-ARM architectures, but this does not
protect non-i.MX ARM architectures.
Since fault handlers can be triggered on any architecture for different
reasons, there is no guarantee that they will be triggered only for the
assumed situation, leading to improper error handling (i.MX6-specific
imx6q_pcie_abort_handler) on foreign systems.
I had seen strange L3 imprecise external abort messages several times on
OMAP4 and OMAP5 devices and couldn't make sense of them until I realized
they were related to this unused imx6q driver because I had
CONFIG_PCI_IMX6=y.
Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed
to run on different ARM SoC and be differentiated only by device tree
binaries. So turning off CONFIG_PCI_IMX6 is not a solution.
Therefore we check the compatible in the init function before registering
the fault handler.
Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com
Fixes: bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO")
Fixes: 415b6185c541 ("PCI: imx6: Fix config read timeout handling")
Fixes: 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2542e16c392508800f1d9037feee881a9c444951 upstream.
Qcom PCIe IP version v2.7.0 and its derivatives don't contain the
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect
register usage which is modifying a different register.
Also in this IP version, this register change doesn't depend on MSI
being enabled. So remove that check also.
Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org
Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org> # 5.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5eff5591b8f9c5effd25c92c758a127765f74c1 upstream.
In 2013, commits
2e35afaefe64 ("PCI: pciehp: Add reset_slot() method")
608c388122c7 ("PCI: Add slot reset option to pci_dev_reset()")
amended PCIe hotplug to mask Presence Detect Changed events during a
Secondary Bus Reset. The reset thus no longer causes gratuitous slot
bringdown and bringup.
However the commits neglected to serialize reset with code paths reading
slot registers. For instance, a slot bringup due to an earlier hotplug
event may see the Presence Detect State bit cleared during a concurrent
Secondary Bus Reset.
In 2018, commit
5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")
retrofitted the missing locking. It introduced a reset_lock which
serializes a Secondary Bus Reset with other parts of pciehp.
Unfortunately the locking turns out to be overzealous: reset_lock is
held for the entire enumeration and de-enumeration of hotplugged devices,
including driver binding and unbinding.
Driver binding and unbinding acquires device_lock while the reset_lock
of the ancestral hotplug port is held. A concurrent Secondary Bus Reset
acquires the ancestral reset_lock while already holding the device_lock.
The asymmetric locking order in the two code paths can lead to AB-BA
deadlocks.
Michael Haeuptle reports such deadlocks on simultaneous hot-removal and
vfio release (the latter implies a Secondary Bus Reset):
pciehp_ist() # down_read(reset_lock)
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
__pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()
pci_stop_and_remove_bus_device()
pci_stop_bus_device()
pci_stop_dev()
device_release_driver()
device_release_driver_internal()
__device_driver_lock() # device_lock()
SYS_munmap()
vfio_device_fops_release()
vfio_device_group_close()
vfio_device_close()
vfio_device_last_close()
vfio_pci_core_close_device()
vfio_pci_core_disable() # device_lock()
__pci_reset_function_locked()
pci_reset_bus_function()
pci_dev_reset_slot_function()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Ian May reports the same deadlock on simultaneous hot-removal and an
AER-induced Secondary Bus Reset:
aer_recover_work_func()
pcie_do_recovery()
aer_root_reset()
pci_bus_error_reset()
pci_slot_reset()
pci_slot_lock() # device_lock()
pci_reset_hotplug_slot()
pciehp_reset_slot() # down_write(reset_lock)
Fix by releasing the reset_lock during driver binding and unbinding,
thereby splitting and shrinking the critical section.
Driver binding and unbinding is protected by the device_lock() and thus
serialized with a Secondary Bus Reset. There's no need to additionally
protect it with the reset_lock. However, pciehp does not bind and
unbind devices directly, but rather invokes PCI core functions which
also perform certain enumeration and de-enumeration steps.
The reset_lock's purpose is to protect slot registers, not enumeration
and de-enumeration of hotplugged devices. That would arguably be the
job of the PCI core, not the PCIe hotplug driver. After all, an
AER-induced Secondary Bus Reset may as well happen during boot-time
enumeration of the PCI hierarchy and there's no locking to prevent that
either.
Exempting *de-enumeration* from the reset_lock is relatively harmless:
A concurrent Secondary Bus Reset may foil config space accesses such as
PME interrupt disablement. But if the device is physically gone, those
accesses are pointless anyway. If the device is physically present and
only logically removed through an Attention Button press or the sysfs
"power" attribute, PME interrupts as well as DMA cannot come through
because pciehp_unconfigure_device() disables INTx and Bus Master bits.
That's still protected by the reset_lock in the present commit.
Exempting *enumeration* from the reset_lock also has limited impact:
The exempted call to pci_bus_add_device() may perform device accesses
through pcibios_bus_add_device() and pci_fixup_device() which are now
no longer protected from a concurrent Secondary Bus Reset. Otherwise
there should be no impact.
In essence, the present commit seeks to fix the AB-BA deadlocks while
still retaining a best-effort reset protection for enumeration and
de-enumeration of hotplugged devices -- until a general solution is
implemented in the PCI core.
Link: https://lore.kernel.org/linux-pci/CS1PR8401MB0728FC6FDAB8A35C22BD90EC95F10@CS1PR8401MB0728.NAMPRD84.PROD.OUTLOOK.COM
Link: https://lore.kernel.org/linux-pci/20200615143250.438252-1-ian.may@canonical.com
Link: https://lore.kernel.org/linux-pci/ce878dab-c0c4-5bd0-a725-9805a075682d@amd.com
Link: https://lore.kernel.org/linux-pci/ed831249-384a-6d35-0831-70af191e9bce@huawei.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: 5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")
Link: https://lore.kernel.org/r/fef2b2e9edf245c049a8c5b94743c0f74ff5008a.1681191902.git.lukas@wunner.de
Reported-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Reported-by: Ian May <ian.may@canonical.com>
Reported-by: Andrey Grodzovsky <andrey2805@gmail.com>
Reported-by: Rahul Kumar <rahul.kumar1@amd.com>
Reported-by: Jialin Zhang <zhangjialin11@huawei.com>
Tested-by: Anatoli Antonovitch <Anatoli.Antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Dan Stein <dstein@hpe.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Alex Michon <amichon@kalrayinc.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53b54ad074de1896f8b021615f65b27f557ce874 upstream.
pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus
Reset, but not after a DPC-induced Hot Reset.
As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not
observed and devices on the secondary bus may be accessed before
they're ready.
One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a
PCIe switch whose upstream port is not immediately ready after reset.
Because its config space is restored too early, it remains in
D0uninitialized, its subordinate devices remain inaccessible and DPC
recovery fails with messages such as:
i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible)
intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible)
pcieport 0000:89:02.0: AER: device recovery failed
Fix it.
Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac91e6980563ed53afadd925fa6585ffd2bc4a2c upstream.
Sheng Bi reports that pci_bridge_secondary_bus_reset() may fail to wait
for devices on the secondary bus to become accessible after reset:
Although it does call pci_dev_wait(), it erroneously passes the bridge's
pci_dev rather than that of a child. The bridge of course is always
accessible while its secondary bus is reset, so pci_dev_wait() returns
immediately.
Sheng Bi proposes introducing a new pci_bridge_secondary_bus_wait()
function which is called from pci_bridge_secondary_bus_reset():
https://lore.kernel.org/linux-pci/20220523171517.32407-1-windy.bi.enflame@gmail.com/
However we already have pci_bridge_wait_for_secondary_bus() which does
almost exactly what we need. So far it's only called on resume from
D3cold (which implies a Fundamental Reset per PCIe r6.0 sec 5.8).
Re-using it for Secondary Bus Resets is a leaner and more rational
approach than introducing a new function.
That only requires a few minor tweaks:
- Amend pci_bridge_wait_for_secondary_bus() to await accessibility of
the first device on the secondary bus by calling pci_dev_wait() after
performing the prescribed delays. pci_dev_wait() needs two parameters,
a reset reason and a timeout, which callers must now pass to
pci_bridge_wait_for_secondary_bus(). The timeout is 1 sec for resume
(PCIe r6.0 sec 6.6.1) and 60 sec for reset (commit 821cdad5c46c ("PCI:
Wait up to 60 seconds for device to become ready after FLR")).
Introduce a PCI_RESET_WAIT macro for the 1 sec timeout.
- Amend pci_bridge_wait_for_secondary_bus() to return 0 on success or
-ENOTTY on error for consumption by pci_bridge_secondary_bus_reset().
- Drop an unnecessary 1 sec delay from pci_reset_secondary_bus() which
is now performed by pci_bridge_wait_for_secondary_bus(). A static
delay this long is only necessary for Conventional PCI, so modern
PCIe systems benefit from shorter reset times as a side effect.
Fixes: 6b2f1351af56 ("PCI: Wait for device to become ready after secondary bus reset")
Link: https://lore.kernel.org/r/da77c92796b99ec568bd070cbe4725074a117038.1673769517.git.lukas@wunner.de
Reported-by: Sheng Bi <windy.bi.enflame@gmail.com>
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a2b9b123ccac913e9f9b80337d687a2fe786a634 ]
Wangxun has verified there is no peer-to-peer between functions for the
below selection of SFxxx, RP1000 and RP2000 NICS. They may be
multi-function devices, but the hardware does not advertise ACS capability.
Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups.
Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9db0b9b6a14249ef65a5f1e5e3b37762af96f425 ]
A PCI bridge may reside on a bus with other devices as well. The resource
distribution code does not take this into account and therefore it expands
the bridge resource windows too much, not leaving space for the other
devices (or functions of a multifunction device). This leads to an issue
that Jonathan reported when running QEMU with the following topology (QEMU
parameters):
-device pcie-root-port,port=0,id=root_port13,chassis=0,slot=2 \
-device x3130-upstream,id=sw1,bus=root_port13,multifunction=on \
-device e1000,bus=root_port13,addr=0.1 \
-device xio3130-downstream,id=fun1,bus=sw1,chassis=0,slot=3 \
-device e1000,bus=fun1
The first e1000 NIC here is another function in the switch upstream port.
This leads to following errors:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04]
pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04]
pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000]
e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Fix this by taking into account bridge windows, device BARs and SR-IOV PF
BARs on the bus (PF BARs include space for VF BARS so only account PF
BARs), including the ones belonging to bridges themselves if it has any.
Link: https://lore.kernel.org/linux-pci/20221014124553.0000696f@huawei.com/
Link: https://lore.kernel.org/linux-pci/6053736d-1923-41e7-def9-7585ce1772d9@ixsystems.com/
Link: https://lore.kernel.org/r/20230131092405.29121-3-mika.westerberg@linux.intel.com
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: Alexander Motin <mav@ixsystems.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08f0a15ee8adb4846b08ca5d5c175fbf0f652bc9 ]
After division the extra resource space per hotplug bridge may not be
aligned according to the window alignment, so align it before passing it
down for further distribution.
Link: https://lore.kernel.org/r/20230131092405.29121-2-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b3517f88ff2983f52698893519227c10aac90b2 ]
Except for isochronous-configured devices, software may set
Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a
read request with size greater than the completer's Max_Payload_Size (MPS),
the completer is required to break the response into multiple completions.
Instead of correctly responding with multiple completions to a large read
request, some LS7A Root Ports respond with a Completer Abort. To prevent
this, the MRRS must be limited to an implementation-specific value.
The OS cannot detect that value, so rely on BIOS to configure MRRS before
booting, and quirk the Root Ports so we never set an MRRS larger than that
BIOS value for any downstream device.
N.B. Hot-added devices are not configured by BIOS, and they power up with
MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the
LS7A limit is smaller, those hot-added devices may not work correctly, but
per [1], hotplug is not supported with this chipset revision.
[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn
[bhelgaas: commit log]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884
Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 63ba51db24ed1b8f8088a897290eb6c036c5435d upstream.
PCI passthrough to VMs does not work with AMD FCH AHCI adapters: the guest
OS fails to correctly probe devices attached to the controller due to FIS
communication failures:
ata4: softreset failed (1st FIS failed)
...
ata4.00: qc timeout after 5000 msecs (cmd 0xec)
ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Forcing the "bus" reset method before unbinding & binding the adapter to
the vfio-pci driver solves this issue, e.g.:
echo "bus" > /sys/bus/pci/devices/<ID>/reset_method
gives a working guest OS, indicating that the default FLR reset method
doesn't work correctly.
Apply quirk_no_flr() to AMD FCH AHCI devices to work around this issue.
Link: https://lore.kernel.org/r/20230128013951.523247-1-damien.lemoal@opensource.wdc.com
Reported-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74ff8864cc842be994853095dba6db48e716400a upstream.
On surprise removal, pciehp_unconfigure_device() and acpiphp's
trim_stale_devices() call pci_dev_set_disconnected() to mark removed
devices as permanently offline. Thereby, the PCI core and drivers know
to skip device accesses.
However pci_dev_set_disconnected() takes the device_lock and thus waits for
a concurrent driver bind or unbind to complete. As a result, the driver's
->probe and ->remove hooks have no chance to learn that the device is gone.
That doesn't make any sense, so drop the device_lock and instead use atomic
xchg() and cmpxchg() operations to update the device state.
As a byproduct, an AB-BA deadlock reported by Anatoli is fixed which occurs
on surprise removal with AER concurrently performing a bus reset.
AER bus reset:
INFO: task irq/26-aerdrv:95 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule
rwsem_down_write_slowpath
down_write_nested
pciehp_reset_slot # acquires reset_lock
pci_reset_hotplug_slot
pci_slot_reset # acquires device_lock
pci_bus_error_reset
aer_root_reset
pcie_do_recovery
aer_process_err_devices
aer_isr
pciehp surprise removal:
INFO: task irq/26-pciehp:96 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule_preempt_disabled
__mutex_lock
mutex_lock_nested
pci_dev_set_disconnected # acquires device_lock
pci_walk_bus
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist # acquires reset_lock
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590
Fixes: a6bd101b8f84 ("PCI: Unify device inaccessible")
Link: https://lore.kernel.org/r/3dc88ea82bdc0e37d9000e413d5ebce481cbd629.1674205689.git.lukas@wunner.de
Reported-by: Anatoli Antonovitch <anatoli.antonovitch@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.20+
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ef0217227b42e2c34a18de316cee3da16c9bf1e upstream.
If a PCI bridge is suspended to D3cold upon entering system sleep,
resuming it entails a Fundamental Reset per PCIe r6.0 sec 5.8.
The delay prescribed after a Fundamental Reset in PCIe r6.0 sec 6.6.1
is sought to be observed by:
pci_pm_resume_noirq()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
However, pci_bridge_wait_for_secondary_bus() bails out if the bridge_d3
flag is not set. That flag indicates whether a bridge is allowed to
suspend to D3cold at *runtime*.
Hence *no* delay is observed on resume from system sleep if runtime
D3cold is forbidden. That doesn't make any sense, so drop the bridge_d3
check from pci_bridge_wait_for_secondary_bus().
The purpose of the bridge_d3 check was probably to avoid delays if a
bridge remained in D0 during suspend. However the sole caller of
pci_bridge_wait_for_secondary_bus(), pci_pm_bridge_power_up_actions(),
is only invoked if the previous power state was D3cold. Hence the
additional bridge_d3 check seems superfluous.
Fixes: ad9001f2f411 ("PCI/PM: Add missing link delays required by the PCIe spec")
Link: https://lore.kernel.org/r/eb37fa345285ec8bacabbf06b020b803f77bdd3d.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa382ffa705bea9931ec92b6f3c70e1fdb372195 upstream.
When pci_create_attr() fails, pci_remove_resource_files() is called which
will iterate over the res_attr[_wc] arrays and frees every non NULL entry.
To avoid a double free here set the array entry only after it's clear we
successfully initialized it.
Fixes: b562ec8f74e4 ("PCI: Don't leak memory if sysfs_create_bin_file() fails")
Link: https://lore.kernel.org/r/20221007070735.GX986@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98b04dd0b4577894520493d96bc4623387767445 upstream.
pci_device_is_present() previously didn't work for VFs because it reads the
Vendor and Device ID, which are 0xffff for VFs, which looks like they
aren't present. Check the PF instead.
Wei Gong reported that if virtio I/O is in progress when the driver is
unbound or "0" is written to /sys/.../sriov_numvfs, the virtio I/O
operation hangs, which may result in output like this:
task:bash state:D stack: 0 pid: 1773 ppid: 1241 flags:0x00004002
Call Trace:
schedule+0x4f/0xc0
blk_mq_freeze_queue_wait+0x69/0xa0
blk_mq_freeze_queue+0x1b/0x20
blk_cleanup_queue+0x3d/0xd0
virtblk_remove+0x3c/0xb0 [virtio_blk]
virtio_dev_remove+0x4b/0x80
...
device_unregister+0x1b/0x60
unregister_virtio_device+0x18/0x30
virtio_pci_remove+0x41/0x80
pci_device_remove+0x3e/0xb0
This happened because pci_device_is_present(VF) returned "false" in
virtio_pci_remove(), so it called virtio_break_device(). The broken vq
meant that vring_interrupt() skipped the vq.callback() that would have
completed the virtio I/O operation via virtblk_done().
[bhelgaas: commit log, simplify to always use pci_physfn(), add stable tag]
Link: https://lore.kernel.org/r/20221026060912.173250-1-mst@redhat.com
Reported-by: Wei Gong <gongwei833x@gmail.com>
Tested-by: Wei Gong <gongwei833x@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6acd25cc98ce0c9ee4fefdaf44fc8bca534b26e5 ]
The pci_epf_test_notifier function should be installed also if only
core_init_notifier is enabled. Fix the current logic.
Link: https://lore.kernel.org/r/20220825090101.20474-1-hayashi.kunihiko@socionext.com
Fixes: 5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Om Prakash Singh <omp@nvidia.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66110361281b2f7da0c8bd51eaf1f152f4236035 ]
commit aeaa0bfe89654 ("PCI: dwc: Move N_FTS setup to common setup")
incorrectly uses pci->link_gen in deriving the index to the
n_fts[] array also introducing the issue of accessing beyond the
boundaries of array for greater than Gen-2 speeds. This change fixes
that issue.
Link: https://lore.kernel.org/r/20220926111923.22487-1-vidyas@nvidia.com
Fixes: aeaa0bfe8965 ("PCI: dwc: Move N_FTS setup to common setup")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0e32818397426a688f598f35d3bc762eca6d7592 upstream.
When pci_assign_resource() is unable to assign resources to a BAR, it uses
pci_revert_fw_address() to fall back to a firmware assignment (if any).
Previously pci_revert_fw_address() assumed all addresses could reach the
device, but this is not true if the device is below a bridge that only
forwards addresses within its windows.
This problem was observed on a Tyan Tomcat IV S1564D system where the BIOS
did not assign valid addresses to several bridges and USB devices:
pci 0000:00:11.0: PCI-to-PCIe bridge to [bus 01-ff]
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: PCIe Upstream Port to [bus 02-ff]
pci 0000:01:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:02:02.0: PCIe Downstream Port to [bus 05-ff]
pci 0000:02:02.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:05:00.0: PCIe-to-PCI bridge to [bus 06-ff]
pci 0000:05:00.0: bridge window [io 0x0000-0x0fff] # unreachable
pci 0000:06:08.0: USB UHCI 1.1
pci 0000:06:08.0: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.1: USB UHCI 1.1
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] # unreachable
pci 0000:06:08.0: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
pci 0000:06:08.1: can't claim BAR 4 [io 0xfce0-0xfcff]: no compatible bridge window
During the first pass of assigning unassigned resources, there was not
enough I/O space available, so we couldn't assign the 06:08.0 BAR and
reverted to the firmware assignment (still unreachable). Reverting the
06:08.1 assignment failed because it conflicted with 06:08.0:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: no space for bridge window [io size 0x2000]
pci 0000:02:02.0: no space for bridge window [io size 0x1000]
pci 0000:05:00.0: no space for bridge window [io size 0x1000]
pci 0000:06:08.0: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.0: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: no space for [io size 0x0020]
pci 0000:06:08.1: BAR 4: trying firmware assignment [io 0xfce0-0xfcff]
pci 0000:06:08.1: BAR 4: [io 0xfce0-0xfcff] conflicts with 0000:06:08.0 [io 0xfce0-0xfcff]
A subsequent pass assigned valid bridge windows and a valid 06:08.1 BAR,
but left the 06:08.0 BAR alone, so the UHCI device was still unusable:
pci 0000:00:11.0: bridge window [io 0xe000-0xefff] released
pci 0000:00:11.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:01:00.0: bridge window [io 0x1000-0x2fff] # reassigned
pci 0000:02:02.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:05:00.0: bridge window [io 0x2000-0x2fff] # reassigned
pci 0000:06:08.0: BAR 4: assigned [io 0xfce0-0xfcff] # left alone
pci 0000:06:08.1: BAR 4: assigned [io 0x2000-0x201f]
...
uhci_hcd 0000:06:08.0: host system error, PCI problems?
uhci_hcd 0000:06:08.0: host controller process error, something bad happened!
uhci_hcd 0000:06:08.0: host controller halted, very bad!
uhci_hcd 0000:06:08.0: HCRESET not completed yet!
uhci_hcd 0000:06:08.0: HC died; cleaning up
If the address assigned by firmware is not reachable because it's not
within upstream bridge windows, fail instead of assigning the unusable
address from firmware.
[bhelgaas: commit log, use pci_upstream_bridge()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=16263
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203012338460.46819@angie.orcam.me.uk
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209211921250.29493@angie.orcam.me.uk
Fixes: 58c84eda0756 ("PCI: fall back to original BIOS BAR addresses")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.35+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit ee70aa214a2d9fa74539b52f6c326ba2f7c0fb11 which is
commit 8795e182b02dc87e343c79e73af6b8b7f9c5e635 upstream.
It is reported to cause problems, so drop it from the stable trees for
now until it gets sorted out.
Link: https://lore.kernel.org/r/47b775c5-57fa-5edf-b59e-8a9041ffbee7@candelatech.com
Reported-by: Ben Greear <greearb@candelatech.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Pali Rohár <pali@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yao Hongbo <yaohongbo@linux.alibaba.com>
Cc: Naveen Naidu <naveennaidu479@gmail.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 387c72cdd7fb6bef650fb078d0f6ae9682abf631 upstream.
Overwriting the frozen detected status with the result of the link reset
loses the NEED_RESET result that drivers are depending on for error
handling to report the .slot_reset() callback. Retain this status so
that subsequent error handling has the correct flow.
Link: https://lore.kernel.org/r/20210104230300.1277180-4-kbusch@kernel.org
Reported-by: Hinko Kocevar <hinko.kocevar@ess.eu>
Tested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sean V Kelley <sean.v.kelley@intel.com>
Acked-by: Hedi Berriche <hedi.berriche@hpe.com>
Cc: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
