IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit d3cc1b0be258191d6360c82ea158c2972f8d3991 upstream.
Since commit d7e7b9af104c ("fscrypt: stop using keyrings subsystem for
fscrypt_master_key"), xfstest generic/270 causes a WARNING when run on
f2fs with test_dummy_encryption in the mount options:
$ kvm-xfstests -c f2fs/encrypt generic/270
[...]
WARNING: CPU: 1 PID: 2453 at fs/crypto/keyring.c:240 fscrypt_destroy_keyring+0x1f5/0x260
The cause of the WARNING is that not all encrypted inodes have been
evicted before fscrypt_destroy_keyring() is called, which violates an
assumption. This happens because the test uses an external quota file,
which gets automatically encrypted due to test_dummy_encryption.
Encryption of quota files has never really been supported. On ext4,
ext4_quota_read() does not decrypt the data, so encrypted quota files
are always considered invalid on ext4. On f2fs, f2fs_quota_read() uses
the pagecache, so trying to use an encrypted quota file gets farther,
resulting in the issue described above being possible. But this was
never intended to be possible, and there is no use case for it.
Therefore, make the quota support layer explicitly reject using
IS_ENCRYPTED inodes when quotaon is attempted.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230905003227.326998-1-ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 869b6ea1609f655a43251bf41757aa44e5350a8f upstream.
Eric has reported that commit dabc8b207566 ("quota: fix dqput() to
follow the guarantees dquot_srcu should provide") heavily increases
runtime of generic/270 xfstest for ext4 in nojournal mode. The reason
for this is that ext4 in nojournal mode leaves dquots dirty until the last
dqput() and thus the cleanup done in quota_release_workfn() has to write
them all. Due to the way quota_release_workfn() is written this results
in synchronize_srcu() call for each dirty dquot which makes the dquot
cleanup when turning quotas off extremely slow.
To be able to avoid synchronize_srcu() for each dirty dquot we need to
rework how we track dquots to be cleaned up. Instead of keeping the last
dquot reference while it is on releasing_dquots list, we drop it right
away and mark the dquot with new DQ_RELEASING_B bit instead. This way we
can we can remove dquot from releasing_dquots list when new reference to
it is acquired and thus there's no need to call synchronize_srcu() each
time we drop dq_list_lock.
References: https://lore.kernel.org/all/ZRytn6CxFK2oECUt@debian-BULLSEYE-live-builder-AMD64
Reported-by: Eric Whitney <enwlinux@gmail.com>
Fixes: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dabc8b20756601b9e1cc85a81d47d3f98ed4d13a ]
The dquot_mark_dquot_dirty() using dquot references from the inode
should be protected by dquot_srcu. quota_off code takes care to call
synchronize_srcu(&dquot_srcu) to not drop dquot references while they
are used by other users. But dquot_transfer() breaks this assumption.
We call dquot_transfer() to drop the last reference of dquot and add
it to free_dquots, but there may still be other users using the dquot
at this time, as shown in the function graph below:
cpu1 cpu2
_________________|_________________
wb_do_writeback CHOWN(1)
...
ext4_da_update_reserve_space
dquot_claim_block
...
dquot_mark_dquot_dirty // try to dirty old quota
test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE
if (test_bit(DQ_MOD_B, &dquot->dq_flags))
// test no dirty, wait dq_list_lock
...
dquot_transfer
__dquot_transfer
dqput_all(transfer_from) // rls old dquot
dqput // last dqput
dquot_release
clear_bit(DQ_ACTIVE_B, &dquot->dq_flags)
atomic_dec(&dquot->dq_count)
put_dquot_last(dquot)
list_add_tail(&dquot->dq_free, &free_dquots)
// add the dquot to free_dquots
if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags))
add dqi_dirty_list // add released dquot to dirty_list
This can cause various issues, such as dquot being destroyed by
dqcache_shrink_scan() after being added to free_dquots, which can trigger
a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots
and then to dirty_list, it is added to free_dquots again after
dquot_writeback_dquots() is executed, which causes the free_dquots list to
be corrupted and triggers a UAF when dqcache_shrink_scan() is called for
freeing dquot twice.
As Honza said, we need to fix dquot_transfer() to follow the guarantees
dquot_srcu should provide. But calling synchronize_srcu() directly from
dquot_transfer() is too expensive (and mostly unnecessary). So we add
dquot whose last reference should be dropped to the new global dquot
list releasing_dquots, and then queue work item which would call
synchronize_srcu() and after that perform the final cleanup of all the
dquots on releasing_dquots.
Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33bcfafc48cb186bc4bbcea247feaa396594229e ]
Add new helper function dquot_active() to make the code more concise.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-4-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b9bdfa16535de8f49bf954aeed0f525ee2fc322 ]
Now we have a helper function dquot_dirty() to determine if dquot has
DQ_MOD_B bit. dquot_active() can easily be misunderstood as a helper
function to determine if dquot has DQ_ACTIVE_B bit. So we avoid this by
renaming it to inode_quota_active() and later on we will add the helper
function dquot_active() to determine if dquot has DQ_ACTIVE_B bit.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-3-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 024128477809f8073d870307c8157b8826ebfd08 ]
Refactor out dquot_write_dquot() to reduce duplicate code.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-2-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a4e3363792e30177cc3965697e34ddcea8b900b ]
When add_dquot_ref() fails (usually due to IO error or ENOMEM), we want
to disable quotas we are trying to enable. However dquot_disable() call
was passed just the flags we are enabling so in case flags ==
DQUOT_USAGE_ENABLED dquot_disable() call will just fail with EINVAL
instead of properly disabling quotas. Fix the problem by always passing
DQUOT_LIMITS_ENABLED | DQUOT_USAGE_ENABLED to dquot_disable() in this
case.
Reported-and-tested-by: Ye Bin <yebin10@huawei.com>
Reported-by: syzbot+e633c79ceaecbf479854@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230605140731.2427629-2-yebin10@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 537e11cdc7a6b3ce94fa25ed41306193df9677b7 ]
As described in commit 02117b8ae9c0 ("f2fs: Set GF_NOFS in
read_cache_page_gfp while doing f2fs_quota_read"), we must not enter
filesystem reclaim while holding the dq_lock. Prevent this more generally
by using memalloc_nofs_save() while holding the lock.
Link: https://lore.kernel.org/r/20220605143815.2330891-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd5532a4994bfda0386eb2286ec00758cee08444 ]
Strangely, dquot_quota_sync ignores the return code from the ->sync_fs
call, which means that quotacalls like Q_SYNC never see the error. This
doesn't seem right, so fix that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e51d68e76d604c6d5d1eb13ae1d6da7f6c8c0dfc upstream.
When dquot_resume() was last updated, the argument that got passed
to vfs_cleanup_quota_inode was incorrectly set.
If type = -1 and dquot_load_quota_sb() returns a negative value,
then vfs_cleanup_quota_inode() gets called with -1 passed as an
argument, and this leads to an array-index-out-of-bounds bug.
Fix this issue by correctly passing the arguments.
Fixes: ae45f07d47cc ("quota: Simplify dquot_resume()")
Link: https://lore.kernel.org/r/20201208194338.7064-1-anant.thazhemadam@gmail.com
Reported-by: syzbot+2643e825238d7aabb37f@syzkaller.appspotmail.com
Tested-by: syzbot+2643e825238d7aabb37f@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move most of the block related definition out of fs.h into more suitable
headers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Anything that walks all inodes on sb->s_inodes list without rescheduling
risks softlockups.
Previous efforts were made in 2 functions, see:
c27d82f fs/drop_caches.c: avoid softlockups in drop_pagecache_sb()
ac05fbb inode: don't softlockup when evicting inodes
but there hasn't been an audit of all walkers, so do that now. This
also consistently moves the cond_resched() calls to the bottom of each
loop in cases where it already exists.
One loop remains: remove_dquot_ref(), because I'm not quite sure how
to deal with that one w/o taking the i_lock.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull vfs d_inode/d_flags memory ordering fixes from Al Viro:
"Fallout from tree-wide audit for ->d_inode/->d_flags barriers use.
Basically, the problem is that negative pinned dentries require
careful treatment - unless ->d_lock is locked or parent is held at
least shared, another thread can make them positive right under us.
Most of the uses turned out to be safe - the main surprises as far as
filesystems are concerned were
- race in dget_parent() fastpath, that might end up with the caller
observing the returned dentry _negative_, due to insufficient
barriers. It is positive in memory, but we could end up seeing the
wrong value of ->d_inode in CPU cache. Fixed.
- manual checks that result of lookup_one_len_unlocked() is positive
(and rejection of negatives). Again, insufficient barriers (we
might end up with inconsistent observed values of ->d_inode and
->d_flags). Fixed by switching to a new primitive that does the
checks itself and returns ERR_PTR(-ENOENT) instead of a negative
dentry. That way we get rid of boilerplate converting negatives
into ERR_PTR(-ENOENT) in the callers and have a single place to
deal with the barrier-related mess - inside fs/namei.c rather than
in every caller out there.
The guts of pathname resolution *do* need to be careful - the race
found by Ritesh is real, as well as several similar races.
Fortunately, it turns out that we can take care of that with fairly
local changes in there.
The tree-wide audit had not been fun, and I hate the idea of repeating
it. I think the right approach would be to annotate the places where
we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse
catch regressions. But I'm still not sure what would be the least
invasive way of doing that and it's clearly the next cycle fodder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/namei.c: fix missing barriers when checking positivity
fix dget_parent() fastpath race
new helper: lookup_positive_unlocked()
fs/namei.c: pull positivity check into follow_managed()
Most of the callers of lookup_one_len_unlocked() treat negatives are
ERR_PTR(-ENOENT). Provide a helper that would do just that. Note
that a pinned positive dentry remains positive - it's ->d_inode is
stable, etc.; a pinned _negative_ dentry can become positive at any
point as long as you are not holding its parent at least shared.
So using lookup_one_len_unlocked() needs to be careful;
lookup_positive_unlocked() is safer and that's what the callers
end up open-coding anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu
fractions as signed 64-bit int, filters negative values and then reports
lower half as signed 32-bit int.
Result may looks like:
fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -489852115
fs.quota.drops = -487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689
Values bigger than 2^31-1 reported as negative.
All counters except "allocated_dquots" and "free_dquots" are monotonic,
thus they should be reported as is without filtering negative values.
Kernel doesn't have generic helper for 64-bit sysctl yet,
let's use at least unsigned long.
Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Make dquot_get_state() gracefully handle a situation when there are no
quota files present even though quotas are enabled.
Signed-off-by: Jan Kara <jack@suse.cz>
Quota on and quota off are protected by s_umount semaphore held in
exclusive mode since commit 7d6cd73d33b6 "quota: Hold s_umount in
exclusive mode when enabling / disabling quotas". This makes it
impossible for dquot_disable() to race with other enabling or disabling
of quotas. Simplify the cleanup done by dquot_disable() based on this
fact and also remove some stale comments. As a bonus this cleanup makes
dquot_disable() properly handle a case when there are no quota inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Now dquot_enable() has only two internal callers and both of them just
need to update quota flags and don't need most of checks. Just drop
dquot_enable() and fold necessary functionality into the two calling
places.
Signed-off-by: Jan Kara <jack@suse.cz>
Rename vfs_load_quota_inode() to dquot_load_quota_inode() to be
consistent with naming of other functions used for enabling quota
accounting from filesystems. Also export the function and add some
sanity checks to assure filesystems are calling the function properly.
Signed-off-by: Jan Kara <jack@suse.cz>
We already have quota inode loaded when resuming quotas. Use
vfs_load_quota() to avoid some pointless churn with the quota inode.
Signed-off-by: Jan Kara <jack@suse.cz>
Factor out setting up of quota inode and eventual error cleanup from
vfs_load_quota_inode(). This will simplify situation for filesystems
that don't have any quota inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
There is a race window where quota was redirted once we drop dq_list_lock inside dqput(),
but before we grab dquot->dq_lock inside dquot_release()
TASK1 TASK2 (chowner)
->dqput()
we_slept:
spin_lock(&dq_list_lock)
if (dquot_dirty(dquot)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->write_dquot(dquot);
goto we_slept
if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) {
spin_unlock(&dq_list_lock);
dquot->dq_sb->dq_op->release_dquot(dquot);
dqget()
mark_dquot_dirty()
dqput()
goto we_slept;
}
So dquot dirty quota will be released by TASK1, but on next we_sleept loop
we detect this and call ->write_dquot() for it.
XFSTEST: 440a80d4cb
Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org
CC: stable@vger.kernel.org
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
It is meaningless to increase DQST_LOOKUPS number while iterating
over dirty/inuse list, so just avoid it.
Link: https://lore.kernel.org/r/20190926083408.4269-1-cgxu519@zoho.com.cn
Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Signed-off-by: Jan Kara <jack@suse.cz>
We reset time limit when current usage is smaller
or equal to soft limit in other place, so follow
this rule in do_set_dqblk().
Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Link: https://lore.kernel.org/r/20190724053216.19392-1-cgxu519@zoho.com.cn
Signed-off-by: Jan Kara <jack@suse.cz>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAl0mED8ACgkQnJ2qBz9k
QNnZ9wgAmC+eP8m6jB38HM7gZ+fWGEX3+FvnjbMbnXmNJTsnYWYC1VIRZhwKZb4b
42OGinfLq5tZMY/whrFBdB/c4UbVhAMhd1aFTpM2n5A6FR12YZxaLZEC+MLy3T7z
VU8m4uWDn80OvlUByo4Bylh+Icj78m8tLgj8SHSWxoh/DlGVKSLj9OKufV9Laens
YxubcUxE5sEEu8IVQen84283oJoizmeQf+f9yogAKIaskDLBzxqBIZwEACEUUchz
kEWRiHwS+Ou8EUHuwXqdKKksQgoLHEdxz2szYK1xSQ1wPmxMKPG5DqbQZv2QUBD0
Ek5T5YP4Tmph4s14n+jKDhakAJcqIQ==
=HWaa
-----END PGP SIGNATURE-----
Merge tag 'for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, udf and quota updates from Jan Kara:
- some ext2 fixes and cleanups
- a fix of udf bug when extending files
- a fix of quota Q_XGETQSTAT[V] handling
* tag 'for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix incorrect final NOT_ALLOCATED (hole) extent length
ext2: Use kmemdup rather than duplicating its implementation
quota: honor quota type in Q_XGETQSTAT[V] calls
ext2: Always brelse bh on failure in ext2_iget()
ext2: add missing brelse() in ext2_iget()
ext2: Fix a typo in ext2_getattr argument
ext2: fix a typo in comment
ext2: add missing brelse() in ext2_new_inode()
ext2: optimize ext2_xattr_get()
ext2: introduce new helper for xattr entry comparison
ext2: merge xattr next entry check to ext2_xattr_entry_valid()
ext2: code cleanup for ext2_preread_inode()
ext2: code cleanup by using test_opt() and clear_opt()
doc: ext2: update description of quota options for ext2
ext2: Strengthen xattr block checks
ext2: Merge loops in ext2_xattr_set()
ext2: introduce helper for xattr entry validation
ext2: introduce helper for xattr header validation
quota: add dqi_dirty_list description to comment of Dquot List Management
Run below script as root, dquot_add_space will return -EDQUOT since
__dquot_transfer call dquot_add_space with flags=0, and dquot_add_space
think it's a preallocation. Fix it by set flags as DQUOT_SPACE_WARN.
mkfs.ext4 -O quota,project /dev/vdb
mount -o prjquota /dev/vdb /mnt
setquota -P 23 1 1 0 0 /dev/vdb
dd if=/dev/zero of=/mnt/test-file bs=4K count=1
chattr -p 23 test-file
Fixes: 7b9ca4c61bc2 ("quota: Reduce contention on dq_data_lock")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Actually there are four lists for dquot management, so add
the description of dqui_dirty_list to comment.
Signed-off-by: Chengguang Xu <cgxu519@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
When we fail from allocating inode/space, we back out
the change we already did. In a special case which has
exceeded soft limit by the change, we should also check
time limit and reset it properly.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Local variable *reserved* of remove_dquot_ref() is only used if
define CONFIG_QUOTA_DEBUG, but not ebraced in CONFIG_QUOTA_DEBUG
macro, which leads to unused-but-set-variable warning when compiling.
This patch ebrace it into CONFIG_QUOTA_DEBUG macro like what is done
in add_dquot_ref().
Signed-off-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Jan Kara <jack@suse.cz>
We need to check return code only when calling ->read_dqblk(),
so fix it properly.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Use list_first_entry() and list_empty() instead of opencoded variants.
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The dquots in the free_dquots list are not reclaimed in LRU way.
put_dquot_last() puts entries to the tail and dqcache_shrink_scan()
frees from the tail. Free unreferenced dquots in LRU order because it
seems more reasonable than freeing most recently used.
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
dquot_init() is never called in atomic context.
This function is only set as a parameter of fs_initcall().
Despite never getting called from atomic context,
dquot_init() calls __get_free_pages() with GFP_ATOMIC,
which waits busily for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
to avoid busy waiting and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
register_shrinker() might return -ENOMEM error since Linux 3.12.
Call panic() as with other failure checks in this function if
register_shrinker() failed.
Fixes: 1d3d4437eae1 ("vmscan: per-node deferred work")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Jan Kara <jack@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
In commit 6184fc0b8dd7 ("quota: Propagate error from ->acquire_dquot()"),
we have propagated error from __dquot_initialize to caller, but we forgot
to handle such error in add_dquot_ref(), so, currently, during quota
accounting information initialization flow, if we failed for some of
inodes, we just ignore such error, and do account for others, which is
not a good implementation.
In this patch, we choose to let user be aware of such error, so after
turning on quota successfully, we can make sure all inodes disk usage
can be accounted, which will be more reasonable.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Pull quota, ext2, isofs and udf fixes from Jan Kara:
- two small quota error handling fixes
- two isofs fixes for architectures with signed char
- several udf block number overflow and signedness fixes
- ext2 rework of mount option handling to avoid GFP_KERNEL allocation
with spinlock held
- ... it also contains a patch to implement auditing of responses to
fanotify permission events. That should have been in the fanotify
pull request but I mistakenly merged that patch into a wrong branch
and noticed only now at which point I don't think it's worth rebasing
and redoing.
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: be aware of error from dquot_initialize
quota: fix potential infinite loop
isofs: use unsigned char types consistently
isofs: fix timestamps beyond 2027
udf: Fix some sign-conversion warnings
udf: Fix signed/unsigned format specifiers
udf: Fix 64-bit sign extension issues affecting blocks > 0x7FFFFFFF
udf: Remove some outdate references from documentation
udf: Avoid overflow when session starts at large offset
ext2: Fix possible sleep in atomic during mount option parsing
ext2: Parse mount options into a dedicated structure
audit: Record fanotify access control decisions
Commit 6184fc0b8dd7 ("quota: Propagate error from ->acquire_dquot()")
missed to handle error from dquot_initialize in dquot_file_open, fix it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In dquot_writeback_dquots(), we write back dquot from dirty dquots
list. There is a potential infinite loop if ->write_dquot() failure
and forget remove dquot from the list. This patch clear dirty bit
anyway to avoid it.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Eryu has reported that since commit 7b9ca4c61bc2 "quota: Reduce
contention on dq_data_lock" test generic/233 occasionally fails. This is
caused by the fact that since that commit we don't generate warning and
set grace time for quota allocations that have DQUOT_SPACE_NOFAIL set
(these are for example some metadata allocations in ext4). We need these
allocations to behave regularly wrt warning generation and grace time
setting so fix the code to return to the original behavior.
Reported-and-tested-by: Eryu Guan <eguan@redhat.com>
CC: stable@vger.kernel.org
Fixes: 7b9ca4c61bc278b771fb57d6290a31ab1fc7fdac
Signed-off-by: Jan Kara <jack@suse.cz>
Lock dq_dqb_lock around dquot_decr_inodes()
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 7b9ca4c61bc2 ("quota: Reduce contention on dq_data_lock")
Signed-off-by: Jan Kara <jack@suse.cz>
