IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 58fbfecab965014b6e3cc956a76b4a96265a1add ]
The software GRO path for esp transport mode uses skb_mac_header_rebuild
prior to re-injecting the packet via the xfrm_napi_dev. This only
copies skb->mac_len bytes of header which may not be sufficient if the
packet contains 802.1Q tags or other VLAN tags. Worse copying only the
initial header will leave a packet marked as being VLAN tagged but
without the corresponding tag leading to mangling when it is later
untagged.
The VLAN tags are important when receiving the decrypted esp transport
mode packet after GRO processing to ensure it is received on the correct
interface.
Therefore record the full mac header length in xfrm*_transport_input for
later use in corresponding xfrm*_transport_finish to copy the entire mac
header when rebuilding the mac header for GRO. The skb->data pointer is
left pointing skb->mac_header bytes after the start of the mac header as
is expected by the network stack and network and transport header
offsets reset to this location.
Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Paul Davey <paul.davey@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 680d11f6e5427b6af1321932286722d24a8b16c1 upstream.
If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to 0. Otherwise it stops
the connected socket from using the cached route.
Fixes: 2e8de8576343 ("udp: add gso segment cmsg")
Signed-off-by: Yick Xie <yick.xie@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240418170610.867084-1-yick.xie@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yick Xie <yick.xie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 65acf6e0501ac8880a4f73980d01b5d27648b956 ]
In my recent commit, I missed that do_replace() handlers
use copy_from_sockptr() (which I fixed), followed
by unsafe copy_from_sockptr_offset() calls.
In all functions, we can perform the @optlen validation
before even calling xt_alloc_table_info() with the following
check:
if ((u64)optlen < (u64)tmp.size + sizeof(tmp))
return -EINVAL;
Fixes: 0c83842df40f ("netfilter: validate user input for expected length")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240409120741.3538135-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74043489fcb5e5ca4074133582b5b8011b67f9e7 ]
When CONFIG_IPV6_SUBTREES is disabled, the only user is hidden, causing
a 'make W=1' warning:
net/ipv6/ip6_fib.c: In function 'fib6_add':
net/ipv6/ip6_fib.c:1388:32: error: variable 'pn' set but not used [-Werror=unused-but-set-variable]
Add another #ifdef around the variable declaration, matching the other
uses in this file.
Fixes: 66729e18df08 ("[IPV6] ROUTE: Make sure we have fn->leaf when adding a node on subtree.")
Link: https://lore.kernel.org/netdev/20240322131746.904943-1-arnd@kernel.org/
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240408074219.3030256-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d010c8031e39f5fa1e8b13ada77e0321091011f ]
When rx-udp-gro-forwarding is enabled UDP packets might be GROed when
being forwarded. If such packets might land in a tunnel this can cause
various issues and udp_gro_receive makes sure this isn't the case by
looking for a matching socket. This is performed in
udp4/6_gro_lookup_skb but only in the current netns. This is an issue
with tunneled packets when the endpoint is in another netns. In such
cases the packets will be GROed at the UDP level, which leads to various
issues later on. The same thing can happen with rx-gro-list.
We saw this with geneve packets being GROed at the UDP level. In such
case gso_size is set; later the packet goes through the geneve rx path,
the geneve header is pulled, the offset are adjusted and frag_list skbs
are not adjusted with regard to geneve. When those skbs hit
skb_fragment, it will misbehave. Different outcomes are possible
depending on what the GROed skbs look like; from corrupted packets to
kernel crashes.
One example is a BUG_ON[1] triggered in skb_segment while processing the
frag_list. Because gso_size is wrong (geneve header was pulled)
skb_segment thinks there is "geneve header size" of data in frag_list,
although it's in fact the next packet. The BUG_ON itself has nothing to
do with the issue. This is only one of the potential issues.
Looking up for a matching socket in udp_gro_receive is fragile: the
lookup could be extended to all netns (not speaking about performances)
but nothing prevents those packets from being modified in between and we
could still not find a matching socket. It's OK to keep the current
logic there as it should cover most cases but we also need to make sure
we handle tunnel packets being GROed too early.
This is done by extending the checks in udp_unexpected_gso: GSO packets
lacking the SKB_GSO_UDP_TUNNEL/_CSUM bits and landing in a tunnel must
be segmented.
[1] kernel BUG at net/core/skbuff.c:4408!
RIP: 0010:skb_segment+0xd2a/0xf70
__udp_gso_segment+0xaa/0x560
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Fixes: 36707061d6ba ("udp: allow forwarding of plain (non-fraglisted) UDP GRO packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f0b8c30345565344df2e33a8417a27503589247d upstream.
UDP GRO validates checksums and in udp4/6_gro_complete fraglist packets
are converted to CHECKSUM_UNNECESSARY to avoid later checks. However
this is an issue for CHECKSUM_PARTIAL packets as they can be looped in
an egress path and then their partial checksums are not fixed.
Different issues can be observed, from invalid checksum on packets to
traces like:
gen01: hw csum failure
skb len=3008 headroom=160 headlen=1376 tailroom=0
mac=(106,14) net=(120,40) trans=160
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0xffff232e ip_summed=2 complete_sw=0 valid=0 level=0)
hash(0x77e3d716 sw=1 l4=1) proto=0x86dd pkttype=0 iif=12
...
Fix this by only converting CHECKSUM_NONE packets to
CHECKSUM_UNNECESSARY by reusing __skb_incr_checksum_unnecessary. All
other checksum types are kept as-is, including CHECKSUM_COMPLETE as
fraglist packets being segmented back would have their skb->csum valid.
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c4386ab4f6c600f75fdfd21143f89bac3e625d0d ]
When rule policy is changed, ipv6 socket cache is not refreshed.
The sock's skb still uses a outdated route cache and was sent to
a wrong interface.
To avoid this error we should update fib node's version when
rule is changed. Then skb's route will be reroute checked as
route cache version is already different with fib node version.
The route cache is refreshed to match the latest rule.
Fixes: 101367c2f8c4 ("[IPV6]: Policy Routing Rules")
Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com>
Signed-off-by: Lena Wang <lena.wang@mediatek.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10bfd453da64a057bcfd1a49fb6b271c48653cdb ]
It seems that if userspace provides a correct IFA_TARGET_NETNSID value
but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr()
returns -EINVAL with an elevated "struct net" refcount.
Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5559cea2d5aa3018a5f00dd2aca3427ba09b386b ]
The pernet operations structure for the subsystem must be registered
before registering the generic netlink family.
Fixes: 915d7e5e5930 ("ipv6: sr: add code base for control plane support of SR-IPv6")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e898e4cd1aab271ca414f9ac6e08e4c761f6913c ]
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 63998ac24f83 ("ipv6: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60365049ccbacd101654a66ddcb299abfabd4fc5 ]
On a parisc64 kernel I sometimes notice this kernel warning:
Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8
The address 0x40ff8814 points to the in6addr_linklocal_allrouters
variable and the warning simply means that some ipv6 function tries to
read a 64-bit word directly from the not-64-bit aligned
in6addr_linklocal_allrouters variable.
Unaligned accesses are non-critical as the architecture or exception
handlers usually will fix it up at runtime. Nevertheless it may trigger
a performance penality for some architectures. For details read the
"unaligned-memory-access" kernel documentation.
The patch below ensures that the ipv6 loopback and router addresses will
always be naturally aligned. This prevents the unaligned accesses for
all architectures.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 034dfc5df99eb ("ipv6: export in6addr_loopback to modules")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afd2051b18404640a116fd3bb2460da214ccbda4 ]
We have a convenient helper, let's use it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd4a816752bab609dd6d65ae021387beb9e2ddbd ]
Lorenzo points out that we effectively clear all unknown
flags from PIO when copying them to userspace in the netlink
RTM_NEWPREFIX notification.
We could fix this one at a time as new flags are defined,
or in one fell swoop - I choose the latter.
We could either define 6 new reserved flags (reserved1..6) and handle
them individually (and rename them as new flags are defined), or we
could simply copy the entire unmodified byte over - I choose the latter.
This unfortunately requires some anonymous union/struct magic,
so we add a static assert on the struct size for a little extra safety.
Cc: David Ahern <dsahern@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23be1e0e2a83a8543214d2599a31d9a2185a796b ]
Initially, commit 4237c75c0a35 ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated. The hook is added just after the allocation,
so reqsk's IPv6 remote address was not initialised then.
However, SELinux/Smack started to read it in netlbl_req_setattr()
after commit e1adea927080 ("calipso: Allow request sockets to be
relabelled by the lsm.").
Commit 284904aa7946 ("lsm: Relocate the IPv4 security_inet_conn_request()
hooks") fixed that kind of issue only in TCPv4 because IPv6 labeling was
not supported at that time. Finally, the same issue was introduced again
in IPv6.
Let's apply the same fix on DCCPv6 and TCPv6.
Fixes: e1adea927080 ("calipso: Allow request sockets to be relabelled by the lsm.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03d6c848bfb406e9ef6d9846d759e97beaeea113 ]
When the ipv6 stack output a GSO packet, if its gso_size is larger than
dst MTU, then all segments would be fragmented. However, it is possible
for a GSO packet to have a trailing segment with smaller actual size
than both gso_size as well as the MTU, which leads to an "atomic
fragment". Atomic fragments are considered harmful in RFC-8021. An
Existing report from APNIC also shows that atomic fragments are more
likely to be dropped even it is equivalent to a no-op [1].
Add an extra check in the GSO slow output path. For each segment from
the original over-sized packet, if it fits with the path MTU, then avoid
generating an atomic fragment.
Link: https://www.potaroo.net/presentations/2022-03-01-ipv6-frag.pdf [1]
Fixes: b210de4f8c97 ("net: ipv6: Validate GSO SKB before finish IPv6 processing")
Reported-by: David Wragg <dwragg@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Link: https://lore.kernel.org/r/90912e3503a242dca0bc36958b11ed03a2696e5e.1698156966.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc9b364bb1d58d3dae270c7a931a8cc717dc2b3b ]
There are race conditions that may lead to inet6_dev refcount underflow
in xfrm6_dst_destroy() and rt6_uncached_list_flush_dev().
One of the refcount underflow bugs is shown below:
(cpu 1) | (cpu 2)
xfrm6_dst_destroy() |
... |
in6_dev_put() |
| rt6_uncached_list_flush_dev()
... | ...
| in6_dev_put()
rt6_uncached_list_del() | ...
... |
xfrm6_dst_destroy() calls rt6_uncached_list_del() after in6_dev_put(),
so rt6_uncached_list_flush_dev() has a chance to call in6_dev_put()
again for the same inet6_dev.
Fix it by moving in6_dev_put() after rt6_uncached_list_del() in
xfrm6_dst_destroy().
Fixes: 510c321b5571 ("xfrm: reuse uncached_list to track xdsts")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dad4e491e30b20f4dc615c9da65d2142d703b5c2 upstream.
In esp_remove_trailer(), to avoid an unexpected result returned by
pskb_trim, we should check the return value of pskb_trim().
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cb249686e67dbef3ffe53887fa725eefc5a7144 upstream.
addrconf_prefix_rcv returned early without releasing the inet6_dev
pointer when the PIO lifetime is less than accept_ra_min_lft.
Fixes: 5027d54a9c30 ("net: change accept_ra_min_rtr_lft to affect all RA lifetimes")
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5027d54a9c30bc7ec808360378e2b4753f053f25 upstream.
accept_ra_min_rtr_lft only considered the lifetime of the default route
and discarded entire RAs accordingly.
This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and
applies the value to individual RA sections; in particular, router
lifetime, PIO preferred lifetime, and RIO lifetime. If any of those
lifetimes are lower than the configured value, the specific RA section
is ignored.
In order for the sysctl to be useful to Android, it should really apply
to all lifetimes in the RA, since that is what determines the minimum
frequency at which RAs must be processed by the kernel. Android uses
hardware offloads to drop RAs for a fraction of the minimum of all
lifetimes present in the RA (some networks have very frequent RAs (5s)
with high lifetimes (2h)). Despite this, we have encountered networks
that set the router lifetime to 30s which results in very frequent CPU
wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the
WiFi firmware) entirely on such networks, it seems better to ignore the
misconfigured routers while still processing RAs from other IPv6 routers
on the same network (i.e. to support IoT applications).
The previous implementation dropped the entire RA based on router
lifetime. This turned out to be hard to expand to the other lifetimes
present in the RA in a consistent manner; dropping the entire RA based
on RIO/PIO lifetimes would essentially require parsing the whole thing
twice.
Fixes: 1671bcfd76fd ("net: add sysctl accept_ra_min_rtr_lft")
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1671bcfd76fdc0b9e65153cf759153083755fe4c upstream.
This change adds a new sysctl accept_ra_min_rtr_lft to specify the
minimum acceptable router lifetime in an RA. If the received RA router
lifetime is less than the configured value (and not 0), the RA is
ignored.
This is useful for mobile devices, whose battery life can be impacted
by networks that configure RAs with a short lifetime. On such networks,
the device should never gain IPv6 provisioning and should attempt to
drop RAs via hardware offload, if available.
Signed-off-by: Patrick Rohr <prohr@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 04295878beac396dae47ba93141cae0d9386e7ef ]
True to the message of commit v5.10-rc1-105-g46d6c5ae953c, _do_
actually make use of state->sk when possible, such as in the REJECT
modules.
Reported-by: Minqiang Chen <ptpt52@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 28427f368f0e ("netfilter: nft_exthdr: Fix non-linear header modification")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f31867d0d9d82af757c1e0178b659438f4c1ea3c ]
The existing code incorrectly casted a negative value (the result of a
subtraction) to an unsigned value without checking. For example, if
/proc/sys/net/ipv6/conf/*/temp_prefered_lft was set to 1, the preferred
lifetime would jump to 4 billion seconds. On my machine and network the
shortest lifetime that avoided underflow was 3 seconds.
Fixes: 76506a986dc3 ("IPv6: fix DESYNC_FACTOR")
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a171fbec88a2c730b108c7147ac5e7b2f5a02b47 ]
LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2,
such that any positive return value from a xmit hook could cause
unexpected continue behavior, despite that related skb may have been
freed. This could be error-prone for future xmit hook ops. One of the
possible errors is to return statuses of dst_output directly.
To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to
distinguish from dst_output statuses and check the continue
condition explicitly.
Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/96b939b85eda00e8df4f7c080f770970a4c5f698.1692326837.git.yan@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0ea27e7bfe1c34e1f451a63eb68faa1d4c3a86d ]
Contrary to TCP, UDP reuseport groups can contain TCP_ESTABLISHED
sockets. To support these properly we remember whether a group has
a connected socket and skip the fast reuseport early-return. In
effect we continue scoring all reuseport sockets and then choose the
one with the highest score.
The current code fails to re-calculate the score for the result of
lookup_reuseport. According to Kuniyuki Iwashima:
1) SO_INCOMING_CPU is set
-> selected sk might have +1 score
2) BPF prog returns ESTABLISHED and/or SO_INCOMING_CPU sk
-> selected sk will have more than 8
Using the old score could trigger more lookups depending on the
order that sockets are created.
sk -> sk (SO_INCOMING_CPU) -> sk (ESTABLISHED)
| |
`-> select the next SO_INCOMING_CPU sk
|
`-> select itself (We should save this lookup)
Fixes: efc6b6f6c311 ("udp: Improve load balancing for SO_REUSEPORT.")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-1-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fd41f1ba638938c9a1195d09bc6fa3be2712f25 ]
When ipv6_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ipv6_vti device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
vti6_tnl_xmit+0x3e6/0x1ee0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
Allocated by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
netlink_sendmsg+0x9b1/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x11b/0x220
kmem_cache_free+0xf0/0x490
skb_free_head+0x17f/0x1b0
skb_release_data+0x59c/0x850
consume_skb+0xd2/0x170
netlink_unicast+0x54f/0x7f0
netlink_sendmsg+0x926/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff88802e08ed00
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 194 bytes inside of
freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80)
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 048c796beb6eb4fa3a5a647ee1c81f5c6f0f6a2a upstream.
The upcoming (and nearly finalized):
https://datatracker.ietf.org/doc/draft-collink-6man-pio-pflag/
will update the IPv6 RA to include a new flag in the PIO field,
which will serve as a hint to perform DHCPv6-PD.
As we don't want DHCPv6 related logic inside the kernel, this piece of
information needs to be exposed to userspace. The simplest option is to
simply expose the entire PIO through the already existing mechanism.
Even without this new flag, the already existing PIO R (router address)
flag (from RFC6275) cannot AFAICT be handled entirely in kernel,
and provides useful information that should be exposed to userspace
(the router's global address, for use by Mobile IPv6).
Also cc'ing stable@ for inclusion in LTS, as while technically this is
not quite a bugfix, and instead more of a feature, it is absolutely
trivial and the alternative is manually cherrypicking into all Android
Common Kernel trees - and I know Greg will ask for it to be sent in via
LTS instead...
Cc: Jen Linkova <furry@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org>
Cc: stable@vger.kernel.org
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230807102533.1147559-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 69172f0bcb6a09110c5d2a6d792627f5095a9018 ]
currently on 6.4 net/main:
# ip link add dummy1 type dummy
# echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr
# ip link set dummy1 up
# ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic
valid_lft 604800sec preferred_lft 86172sec
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1
(can wait a few seconds if you want to, the above delete isn't [directly] the problem)
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic
valid_lft 604797sec preferred_lft 86169sec
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
This patch prevents this new 'global temporary dynamic' address from being
created by the deletion of the related (same subnet prefix) 'mngtmpaddr'
(which is triggered by there already being no temporary addresses).
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: 53bd67491537 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses")
Reported-by: Xiao Ma <xiaom@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230720160022.1887942-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4258faa130be4ea43e5e2d839467da421b8ff274 ]
goto tx_err if an unexpected result is returned by pskb_tirm()
in ip6erspan_tunnel_xmit().
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06a0716949c22e2aefb648526580671197151acc ]
Now in addrconf_mod_rs_timer(), reference idev depends on whether
rs_timer is not pending. Then modify rs_timer timeout.
There is a time gap in [1], during which if the pending rs_timer
becomes not pending. It will miss to hold idev, but the rs_timer
is activated. Thus rs_timer callback function addrconf_rs_timer()
will be executed and put idev later without holding idev. A refcount
underflow issue for idev can be caused by this.
if (!timer_pending(&idev->rs_timer))
in6_dev_hold(idev);
<--------------[1]
mod_timer(&idev->rs_timer, jiffies + when);
To fix the issue, hold idev if mod_timer() return 0.
Fixes: b7b1bfce0bb6 ("ipv6: split duplicate address detection and router solicitation timer")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51d03e2f2203e76ed02d33fb5ffbb5fc85ffaf54 ]
Amit Klein reported that udp6_ehash_secret was initialized but never used.
Fixes: 1bbdceef1e53 ("inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cacf81f8161111db25f98e78a7a0e32ae142b3f ]
Add custom implementation of getsockopt hook for TCP_ZEROCOPY_RECEIVE.
We skip generic hooks for TCP_ZEROCOPY_RECEIVE and have a custom
call in do_tcp_getsockopt using the on-stack data. This removes
3% overhead for locking/unlocking the socket.
Without this patch:
3.38% 0.07% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt
|
--3.30%--__cgroup_bpf_run_filter_getsockopt
|
--0.81%--__kmalloc
With the patch applied:
0.52% 0.12% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt_kern
Note, exporting uapi/tcp.h requires removing netinet/tcp.h
from test_progs.h because those headers have confliciting
definitions.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210115163501.805133-2-sdf@google.com
Stable-dep-of: 2598619e012c ("sctp: add bpf_bypass_getsockopt proto callback")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f015b900bc3285322029b4a7d132d6aeb0e51857 ]
With offloading enabled, esp_xmit() gets invoked very late, from within
validate_xmit_xfrm() which is after validate_xmit_skb() validates and
linearizes the skb if the underlying device does not support fragments.
esp_output_tail() may add a fragment to the skb while adding the auth
tag/ IV. Devices without the proper support will then send skb->data
points to with the correct length so the packet will have garbage at the
end. A pcap sniffer will claim that the proper data has been sent since
it parses the skb properly.
It is not affected with INET_ESP_OFFLOAD disabled.
Linearize the skb after offloading if the sending hardware requires it.
It was tested on v4, v6 has been adopted.
Fixes: 7785bba299a8d ("esp: Add a software GRO codepath")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1166a530a84758bb9e6b448fc8c195ed413f5ded ]
Before Linux v5.8 an AF_INET6 SOCK_DGRAM (udp/udplite) socket
with SOL_UDP, UDP_ENCAP, UDP_ENCAP_ESPINUDP{,_NON_IKE} enabled
would just unconditionally use xfrm4_udp_encap_rcv(), afterwards
such a socket would use the newly added xfrm6_udp_encap_rcv()
which only handles IPv6 packets.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Benedict Wong <benedictwong@google.com>
Cc: Yan Yan <evitayan@google.com>
Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91ffd1bae1dafbb9e34b46813f5b058581d9144d ]
Ping sockets can't send packets when they're bound to a VRF master
device and the output interface is set to a slave device.
For example, when net.ipv4.ping_group_range is properly set, so that
ping6 can use ping sockets, the following kind of commands fails:
$ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1
What happens is that sk->sk_bound_dev_if is set to the VRF master
device, but 'oif' is set to the real output device. Since both are set
but different, ping_v6_sendmsg() sees their value as inconsistent and
fails.
Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if.
This fixes the following kselftest failure:
$ ./fcnal-test.sh -t ipv6_ping
[...]
TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL]
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/b6191f90-ffca-dbca-7d06-88a9788def9c@alu.unizg.hr/
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Fixes: 5e457896986e ("net: ipv6: Fix ping to link-local addresses.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/6c8b53108816a8d0d5705ae37bdc5a8322b5e3d9.1686153846.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>