IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
So far we have a few workarounds at shutdown for each codec,
e.g. turning off the display power and setting the codec to D3.
But all those are basically a part of the suspend procedure.
Moreover, the streams are still active after that call, hence it might
hit the update on the codec that has been already put to D3.
In this patch, instead of calling each reboot_notify callback, simply
put the codec into the runtime-suspended state after the manual
suspend of all PCM streams. It makes the code and the behavior more
consistent.
The reboot_notify callback is no longer used after this patch, and
will be cleaned up later.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045
Link: https://lore.kernel.org/r/20210813081230.4268-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA PCM core has an optimized way to communicate with user-space for
its control and status data via mmap on the supported architectures
like x86. Depending on the situation, however, we'd rather want to
enforce user-space notifying the applptr or hwptr change explicitly
via ioctl. For example, the upcoming non-contig and non-coherent
buffer handling would need an explicit sync, and this needs to catch
the applptr and hwptr changes. Also, ASoC SOF driver will have the
SPIB support that has the similar requirement for the explicit control
of the applptr and hwptr.
This patch adds the new PCM hardware info flag,
SNDRV_PCM_INFO_EXPLICIT_SYNC. When this flag is set, PCM core
disables both the control and the status mmap, which enforces
user-space to update via SYNC_PTR ioctl. In that way, drivers can
catch the applptr and hwptr update and apply the sync operation if
needed.
Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20210610205326.1176400-1-pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20210813082142.5375-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds a second mixer control to Digidesign Mbox
to select between Analog/SPDIF capture.
Users will note that selecting the SPDIF input source
automatically switches the clock mode to sync to SPDIF,
which is a feature of the hardware.
(You can change the clock source back to internal if you want
to capture from spdif but not sync to its clock although this mode
is probably not recommended).
Unfortunately, starting the stream resets both modes
to Internally clocked and Analog input mode.
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Tested-by: Damien Zammit <damien@zamaudio.com>
Link: https://lore.kernel.org/r/20210813113402.11849-1-damien@zamaudio.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is an update on an earlier contribution from Heikki Krogerus
The function device_add_properties() is going to be removed.
Replacing it with software node API equivalents.
Thanks for Hans de Goede and Andy Shevchenko for their comments,
suggestions and Reviewed-by tags on GitHub. The review thread can be
found at https://github.com/thesofproject/linux/pull/3041)
v3 changes:
Fixed nit-picks from Andy: label, return value, missing commas/periods.
Added Andy's Reviewed-by tag
v2 changes: feedback from Andy and Hans
Better error handling
Codec reference is kept until the .remove callback
Remove bus search to find device
v1 changes from Heikki's patches:
Avoid the use of devm_ routines for Baytrail machine drivers.
Heikki Krogerus (1):
ASoC: Intel: boards: use software node API in Atom boards
Pierre-Louis Bossart (7):
ASoC: Intel: boards: harden codec property handling
ASoC: Intel: boards: handle errors with acpi_dev_get_first_match_dev()
ASoC: Intel: boards: get codec device with ACPI instead of bus search
ASoC: Intel: sof_sdw: pass card information to init/exit functions
ASoC: Intel: sof_sdw_rt711*: keep codec device reference until remove
ASoC: Intel: use software node API in SoundWire machines
ASoC: Intel: remove device_properties for Atom boards
sound/soc/intel/boards/bytcht_es8316.c | 31 ++++++++--
sound/soc/intel/boards/bytcr_rt5640.c | 60 +++++++++++++++-----
sound/soc/intel/boards/bytcr_rt5651.c | 63 ++++++++++++++-------
sound/soc/intel/boards/sof_sdw.c | 20 ++++---
sound/soc/intel/boards/sof_sdw_common.h | 37 +++++++-----
sound/soc/intel/boards/sof_sdw_max98373.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt1308.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt1316.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt5682.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt700.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt711.c | 51 +++++++++--------
sound/soc/intel/boards/sof_sdw_rt711_sdca.c | 52 +++++++++--------
sound/soc/intel/boards/sof_sdw_rt715.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 3 +-
14 files changed, 223 insertions(+), 112 deletions(-)
--
2.25.1
This patch series aims to add ASoC support on RZ/G2L SoC's.
It is based on the work done by Chris Brandt for RZ/A ASoC driver.
v4->v5
* Moved validation of sample bits in hw_params
* Removed validation of frame bits as it is redundant
* split the rz_ssi_start_stop function into rz_ssi_start and rz_ssi_stop.
* remove the spin_lock around rz_ssi_stream_init.
* Updated dmas description and removed fixes as it is an enhancement
now.
* updated ssi_start functions with setting fifo thresholds
and ssi_stop function with cancel all dma txn.
v3->v4:
* Updated the subject line as per style for the subsystem.
* Removed select SND_SIMPLE_CARD from Kconfig
* Added C++ comments for copyright and driver description.
* Moved validation of channels in hw_params
* removed asm issue reported by bot as well as Mark
* replaced master/slave macros with provider/consumer macros
* Improved locking and added more null pointer checks.
v2->v3:
* Fixed the dependency on KCONFIG
* Merged the binding patch with dma feature added
* Updated dt binding example with encoded #dma-cells value.
* Improved Error handling in probe function
* Removed the passing legacy channel configuration parameters from
dmaengine_slave_config function
* started using dma_request_chan instead of deprecated
dma_request_slave_channel
* Removed SoC dtsi and config patches from this series. Will send it later.
v1->v2:
* Rebased to latest rc kernel
Biju Das (3):
ASoC: sh: Add RZ/G2L SSIF-2 driver
ASoC: dt-bindings: renesas,rz-ssi: Update slave dma channel
configuration parameters
ASoC: sh: rz-ssi: Add SSI DMAC support
.../bindings/sound/renesas,rz-ssi.yaml | 22 +-
sound/soc/sh/Kconfig | 6 +
sound/soc/sh/Makefile | 4 +
sound/soc/sh/rz-ssi.c | 1063 +++++++++++++++++
4 files changed, 1093 insertions(+), 2 deletions(-)
create mode 100644 sound/soc/sh/rz-ssi.c
--
2.17.1
This patchset provides an optimization that result in significant power
savings on Intel HDAudio platforms using SOF (Sound Open Firmware).
We previously prevented the Intel DSP from enabling the DMI_L1
capability to work-around issues with pause on capture streams. It
turns out that this also prevented the platform from entering high C
states in full-duplex usages such as videoconferencing - a rather
basic use case since the start of the pandemic.
The support for pause_push/release was already a bit controversial for
Intel platforms, in theory platforms should only enable PAUSE if they
can resume on the same sample, which is not the case on any Intel
platform.
With this patchset, when the user enables DMI L1 via a kernel
parameter, the PAUSE support is disabled for capture streams. A kernel
parameter is far from ideal but it's a placeholder until we have an
API to negotiate capabilities between applications and driver, and
it's far less confusing than a Kconfig option.
Changes since v1:
Removal of SPIB support since it may conflict with Takashi's memalloc
changes. These SPIB changes will be provided after rebase.
Addition of one cleanup for cppcheck warning
Move all changes to intel/ directory, no changes in shared code
Flipped the logic: the selection of DMI L1 disables PAUSE
Pierre-Louis Bossart (4):
ASoC: SOF: Intel: Kconfig: clarify DMI L1 option description
ASoC: SOF: Intel: hda-stream: remove always true condition
ASoC: SOF: Intel: simplify logic for DMI_L1 handling
ASoC: SOF: Intel: make DMI L1 selection more robust
sound/soc/sof/intel/Kconfig | 10 ----------
sound/soc/sof/intel/hda-pcm.c | 16 ++++++++++++++--
sound/soc/sof/intel/hda-stream.c | 11 +++++------
3 files changed, 19 insertions(+), 18 deletions(-)
--
2.25.1
The function device_add_properties() is going to be removed.
Replacing it with software node API equivalents.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare the transition to the software node API by removing device
properties in the probe error handling and .remove callback.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function device_add_properties() is going to be removed.
Replacing it with software node API equivalents.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the example of Intel Atom drivers and keep a reference to the
headset codec until the properties are removed.
There is no guarantee that the module for the codec driver is loaded
before the machine driver probe, the use of the deferred probe
mechanism is required.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we want to handle a context in init/exit function, we have to pass
the card information. This will be necessary to better deal with
device properties in the follow-up commits.
No functional change other than prototype update.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have an existing 'adev' handle from which we can find the codec
device, no need for an I2C bus search.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
acpi_dev_get_first_match_dev() searches for an acpi_handle
instantiated by the ACPI table scanning done early during boot.
Two of three machine drivers using this search don't deal with errors
and the one which does (bytcr_rt5651) returns -ENODEV, which doesn't
make sense here: an alternate driver will not be probed.
Add consistent error handling and report -ENXIO.
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In current ACPI-based devices, the DSDT does not include any of the
properties required by the codec driver. This is not an ACPI
limitation proper since the _DSD method could be used, as done for
Camera and SoundWire in newer platforms. For legacy devices, there is
unfortunately no other option than using a work-around: we add
properties to the codec device from the machine driver.
To avoid any issues with the codec driver being unbound, we need to
keep a reference to the codec device until the card is removed.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 772d44526e20 ("ASoC: rt5682: Properly turn off regulators if
wrong device ID") I deleted code but forgot to delete a variable
that's now unused. Delete it.
Fixes: 772d44526e20 ("ASoC: rt5682: Properly turn off regulators if wrong device ID")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210813073402.1.Iaa9425cfab80f5233afa78b32d02b6dc23256eb3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Add serial sound interface(SSIF-2) driver support for
RZ/G2L SoC.
Based on the work done by Chris Brandt for RZ/A SSI driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210813091156.10700-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Exposing the DMI L1 configuration as a kernel Kconfig option was in
hindsight a really bad idea. It led to several errors reported by
distributions which selected it by mistake.
The Kconfig is now replaced with a kernel parameter. Since DMI L1
entry is incompatible with pause on a capture stream, the latter is
disabled when the kernel parameter is set.
Experimental results show an increased residency in higher C states
and a significant decrease of system power consumption for "work from
home" usages such as VoIP calls.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210812231940.172547-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to test in multiple places if the kconfig
SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1 is enabled or not, we might as
well set the existing DMI_L1_COMPATIBLE flag.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210812231940.172547-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We test if (!stream) and return and later on re-test for stream.
The second test is always true.
This was detected by cppcheck but only after additional code changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210812231940.172547-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This option is only valid for HDaudio platforms. This was described in
the help but not explicit in the option description.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210812231940.172547-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is an enhancement for the SG-style page handling in vmalloc
buffer handler to calculate the continuous pages.
When snd_sgbuf_get_chunk_size() is called for a vmalloc buffer,
currently we return only the size that fits into a single page.
However, this API call is rather supposed for obtaining the continuous
pages and most of vmalloc or noncontig buffers do have lots of
continuous pages indeed. So, in this patch, the callback now
calculates the possibly continuous pages up to the given size limit.
Note that the end address in the function is calculated from the last
byte, hence it's one byte shorter. This is because ofs + size can be
above the actual buffer size boundary.
Until now, this feature isn't really used, but it'll become useful in
a later patch that adds the non-contiguous buffer type that shares the
same callback function as vmalloc.
Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20210813081645.4680-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some of the register values set for type detection cause pops during suspend,
ensure these are cleaned up after type detection completes, as well
ensuring that these are cleared when we suspend.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210812183433.6330-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Codec is muted on init, and then unmuted when the stream starts.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-28-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since delays when starting jack detection after initialization
have been reduced/removed, it is necessary to add back in an extra
20ms delay after the init sequence to allow the CS42L42 to power up
correctly.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-26-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS42L42 is configured to use a fixed sample rate of 48kHz.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-24-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Headphones codec will keep reduced maximum volume.
Line Out codec will have increased maximum volume.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-23-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dolphin devices have CS8409 HDA Bridge connected to two CS42L42 codecs.
Codec 1 supports Headphone and Headset Mic.
Codec 2 supports Line Out.
Features:
- Front and Read Jacks appear as separate jacks; Removal or connection
of on jack should not affect the connection of the other.
- Front Jack only shows up on jack detection.
- Rear Jack is Phantom Jack.
- Separate Volume Controls for each Jack
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-22-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some hardware configurations do not support jack type detection.
Instead, for those configurations, only tip detection is supported.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-21-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To accommodate move, cs42l42_resume has been added to mirror
the existing function cs42l42_suspend.
Function cs42l42_reset is no longer required, since cs42l42_resume
and cs42l42_suspend perform the same operations.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-19-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This allows mutex locks to be moved into i2c functions, as
the bulk read/write functions can lock/unlock themselves to
prevent interruption of sequence reads/writes.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-17-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Only disable I2C clock 25 ms after not being used.
The current implementation enables and disables the I2C clock for each
I2C transaction. Each enable/disable call requires two verb transactions.
This means each I2C transaction requires a total of four verb transactions
to enable and disable the clock.
However, if there are multiple consecutive I2C transactions, it is not
necessary to enable and disable the clock each time, instead it is more
efficient to enable the clock for the first transaction, and disable it
after the final transaction, which would improve performance.
This is achieved by using a timeout which disables the clock if no request
to enable the clock has occurred for 25 ms.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-14-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use amp offsets as indexes for saved volumes.
Remove dependencies on NID inside volume control functions.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-13-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The subsequence suspend and remuse have their enable/disable
unsolicited responses at the correct place already
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-9-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enable HSBIAS_SENSE_EN for Cyborg during jack detect to reduce
pops and clicks.
Do not enable this for Warlock/Bullseye, as it causes ESD issues.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210811185654.6837-6-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
