IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 2067e7a00aa604b94de31d64f29b8893b1696f26 ]
The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.
Before the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
ERROR: inet port rewrite
After the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
PASS: inet port rewrite without l3 address
Fixes: 282e5f8fe907 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4e7d2a8f0b52abf23b1dc13b3d88bc0923383cd5 upstream.
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org
Fixes: 6e98d1b4415fe ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8bf9b98d40dbdf4e39362e3b85a70c61da68cb7 upstream.
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org
Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83d29d439cd3ef23041570d55841f814af2ecac0 upstream.
When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).
Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.
Cc: stable@vger.kernel.org
Fixes: 9f2cdcbbb90e7 ("ktest: Give console process a dedicated tty")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8677e555f17f51321d0730b945aeb7d4b95f998f upstream.
Update ptrace tests according to all potential Yama security policies.
This is required to make such tests pass even if Yama is enabled.
Tests are not skipped but they now check both Landlock and Yama boundary
restrictions at run time to keep a maximum test coverage (i.e. positive
and negative testing).
Signed-off-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230114020306.1407195-2-jeffxu@google.com
Cc: stable@vger.kernel.org
[mic: Add curly braces around EXPECT_EQ() to make it build, and improve
commit message]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 366617a69e60610912836570546f118006ebc7cb upstream.
overlayfs may be disabled in the kernel configuration, causing related
tests to fail. Check that overlayfs is supported at runtime, so we can
skip layout2_overlay.* accordingly.
Signed-off-by: Jeff Xu <jeffxu@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230113053229.1281774-2-jeffxu@google.com
[mic: Reword comments and constify variables]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1e6b485c922fbedf41d5a9f4e6449c5aeb923a32 ]
Since commit a1d6cd88c897 ("selftests/ftrace: event_triggers: wait
longer for test_event_enable") introduced bash specific "=="
comparation operator, that test will fail when we run it on a
posix-shell. `checkbashisms` warned it as below.
possible bashism in ftrace/func_event_triggers.tc line 45 (should be 'b = a'):
if [ "$e" == $val ]; then
This replaces it with "=".
Fixes: a1d6cd88c897 ("selftests/ftrace: event_triggers: wait longer for test_event_enable")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f922c7b1c1c45740d329bf248936fdb78c0cff6e ]
When devlink instance is put into network namespace and that network
namespace gets deleted, devlink instance is moved back into init_ns.
This is done as a part of cleanup_net() routine. Since cleanup_net()
is called asynchronously from workqueue, there is no guarantee that
the devlink instance move is done after "ip netns del" returns.
So fix this race by making sure that the devlink instance is present
before any other operation.
Reported-by: Amir Tzin <amirtz@nvidia.com>
Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230220132336.198597-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b60417a9f2b890a8094477b2204d4f73c535725e ]
Usage of `set -e` before executing a command causes immediate exit
on failure, without cleanup up the resources allocated at setup.
This can affect the next tests that use the same resources,
leading to a chain of failures.
A simple fix is to always call cleanup function when the script exists.
This approach is already used by other existing tests.
Fixes: 1056691b2680 ("selftests: fib_tests: Make test results more verbose")
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Link: https://lore.kernel.org/r/20230220110400.26737-2-roxana.nicolescu@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 436864095a95fcc611c20c44a111985fa9848730 ]
Data passed to user-space with a (SOL_UDP, UDP_GRO) cmsg carries an
int (see udp_cmsg_recv), not a u16 value, as strace confirms:
recvmsg(8, {msg_name=...,
msg_iov=[{iov_base="\0\0..."..., iov_len=96000}],
msg_iovlen=1,
msg_control=[{cmsg_len=20, <-- sizeof(cmsghdr) + 4
cmsg_level=SOL_UDP,
cmsg_type=0x68}], <-- UDP_GRO
msg_controllen=24,
msg_flags=0}, 0) = 11200
Interpreting the data as an u16 value won't work on big-endian platforms.
Since it is too late to back out of this API decision [1], fix the test.
[1]: https://lore.kernel.org/netdev/20230131174601.203127-1-jakub@cloudflare.com/
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b0757244754ea1d0721195c824770f5576e119e ]
Building BPF selftests out of srctree fails with:
make: *** No rule to make target '/linux-build//ima_setup.sh', needed by 'ima_setup.sh'. Stop.
The culprit is the rule that defines convenient shorthands like
"make test_progs", which builds $(OUTPUT)/test_progs. These shorthands
make sense only for binaries that are built though; scripts that live
in the source tree do not end up in $(OUTPUT).
Therefore drop $(TEST_PROGS) and $(TEST_PROGS_EXTENDED) from the rule.
The issue exists for a while, but it became a problem only after commit
d68ae4982cb7 ("selftests/bpf: Install all required files to run selftests"),
which added dependencies on these scripts.
Fixes: 03dcb78460c2 ("selftests/bpf: Add simple per-test targets to Makefile")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230208231211.283606-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 90091c367e74d5b58d9ebe979cc363f7468f58d3 upstream.
Exit with return code 4 if lkdtm is not available like other tests
in order to properly skip the test.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210805101236.1140381-1-misono.tomohiro@jp.fujitsu.com
Cc: Andrew Paniakin <apanyaki@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3a082086aa200852545cf15159213582c0c80eba ]
When set/restore sysctl value, we should quote the value as some keys
may have multi values, e.g. net.ipv4.ping_group_range
Fixes: f5ae57784ba8 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 329c9cd769c2e306957df031efff656c40922c76 ]
The test tool can check that the zerocopy number of completions value is
valid taking into consideration the number of datagram send calls. This can
catch the system into a state where the datagrams are still in the system
(for example in a qdisk, waiting for the network interface to return a
completion notification, etc).
This change adds a retry logic of computing the number of completions up to
a configurable (via CLI) timeout (default: 2 seconds).
Fixes: 79ebc3c26010 ("net/udpgso_bench_tx: options to exercise TX CMSG")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-4-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dafe93b9ee21028d625dce347118b82659652eff ]
"udpgro_bench.sh" invokes udpgso_bench_rx/udpgso_bench_tx programs
subsequently and while doing so, there is a chance that the rx one is not
ready to accept socket connections. This racing bug could fail the test
with at least one of the following:
./udpgso_bench_tx: connect: Connection refused
./udpgso_bench_tx: sendmsg: Connection refused
./udpgso_bench_tx: write: Connection refused
This change addresses this by making udpgro_bench.sh wait for the rx
program to be ready before firing off the tx one - up to a 10s timeout.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-3-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db9b47ee9f5f375ab0c5daeb20321c75b4fa657d ]
Leaving unrecognized arguments buried in the output, can easily hide a
CLI/script typo. Avoid this by exiting when wrong arguments are provided to
the udpgso_bench test programs.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-2-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c03c80e3a03ffb4f790901d60797e9810539d946 ]
This change fixes the following compiler warning:
/usr/include/x86_64-linux-gnu/bits/error.h:40:5: warning: ‘gso_size’ may
be used uninitialized [-Wmaybe-uninitialized]
40 | __error_noreturn (__status, __errnum, __format,
__va_arg_pack ());
|
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
udpgso_bench_rx.c: In function ‘main’:
udpgso_bench_rx.c:253:23: note: ‘gso_size’ was declared here
253 | int ret, len, gso_size, budget = 256;
Fixes: 3327a9c46352 ("selftests: add functionals test for UDP GRO")
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230201001612.515730-1-andrei.gherzan@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a23039c7306f53416ba35d230201398ea34f4640 upstream.
Some selftests depend on information provided by the CPUID instruction.
To support this dependency the selftests implement private wrappers for
CPUID.
Duplication of the CPUID wrappers should be avoided.
Both gcc and clang/LLVM provide __cpuid_count() macros but neither
the macro nor its header file are available in all the compiler
versions that need to be supported by the selftests. __cpuid_count()
as provided by gcc is available starting with gcc v4.4, so it is
not available if the latest tests need to be run in all the
environments required to support kernels v4.9 and v4.14 that
have the minimal required gcc v3.2.
Duplicate gcc's __cpuid_count() macro to provide a centrally defined
macro for __cpuid_count() to help eliminate the duplicate CPUID wrappers
while continuing to compile in older environments.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Kyle Huey <me@kylehuey.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e89908201e2509354c40158b517945bf3d645812 upstream.
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from vm tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Kyle Huey <me@kylehuey.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 066b34aa5461f6072dbbecb690f4fe446b736ebf upstream.
tools/include/linux/kernel.h and kselftest_harness.h are missing
ifndef guard around ARRAY_SIZE define. Fix them to avoid duplicate
define errors during compile when another file defines it. This
problem was found when compiling selftests that include a header
with ARRAY_SIZE define.
ARRAY_SIZE is defined in several selftests. There are about 25+
duplicate defines in various selftests source and header files.
Add ARRAY_SIZE to kselftest.h in preparation for removing duplicate
ARRAY_SIZE defines from individual test files.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Kyle Huey <me@kylehuey.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 903848249a781d76d59561d51676c95b3a4d7162 ]
Avoid race between process wakeup and tpacket_v3 block timeout.
The test waits for cfg_timeout_msec for packets to arrive. Packets
arrive in tpacket_v3 rings, which pass packets ("frames") to the
process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov
msec to release a block.
Set the block timeout lower than the process waiting time, else
the process may find that no block has been released by the time it
scans the socket list. Convert to a ring of more than one, smaller,
blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB.
Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230118151847.4124260-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cedebd74cf3883f0384af9ec26b4e6f8f1964dd4 ]
Verify that nullness information is not porpagated in the branches
of register to register JEQ and JNE operations if one of them is
PTR_TO_BTF_ID. Implement this in C level so we can use CO-RE.
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221222024414.29539-2-sunhao.th@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d6ceeb1875cc08dc3d1e558e191434d94840cd5 ]
Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.
The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.
Visible from the trace excerpt:
bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)
BUG: The filename is trimmed to sizeof (struct sockaddr).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 561cafebb2cf97b0927b4fb0eba22de6200f682e upstream.
The following warning appears when executing:
make -C tools/testing/selftests/kvm
rseq_test.c: In function ‘main’:
rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration]
(void *)(unsigned long)gettid());
^~~~~~
getgid
/usr/bin/ld: /tmp/ccr5mMko.o: in function `main':
../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid'
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1
Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it.
More subsequent reuse may cause it to be wrapped in a lib file.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220802071240.84626-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ea25770b043c7997ab21d1ce95ba5de4d3d85d9 upstream
This tests PTRACE_SETREGSET with NT_X86_XSTATE modifying PKRU directly and
removing the PKRU bit from XSTATE_BV.
Signed-off-by: Kyle Huey <me@kylehuey.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20221115230932.7126-7-khuey%40kylehuey.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ad51ab618de5d05f4e692ebabeb6fe6289aaa57 upstream.
The build of kselftests fails if relative path is specified through
KBUILD_OUTPUT or O=<path> method. BUILD variable is used to determine
the path of the output objects. When make is run from other directories
with relative paths, the exact path of the build objects is ambiguous
and build fails.
make[1]: Entering directory '/home/usama/repos/kernel/linux_mainline2/tools/testing/selftests/alsa'
gcc mixer-test.c -L/usr/lib/x86_64-linux-gnu -lasound -o build/kselftest/alsa/mixer-test
/usr/bin/ld: cannot open output file build/kselftest/alsa/mixer-test
Set the BUILD variable to the absolute path of the output directory.
Make the logic readable and easy to follow. Use spaces instead of tabs
for indentation as if with tab indentation is considered recipe in make.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de3ee3f63400a23954e7c1ad1cb8c20f29ab6fe3 upstream.
This change enables to extend CFLAGS and LDFLAGS from command line, e.g.
to extend compiler checks: make USERCFLAGS=-Werror USERLDFLAGS=-static
USERCFLAGS and USERLDFLAGS are documented in
Documentation/kbuild/makefiles.rst and Documentation/kbuild/kbuild.rst
This should be backported (down to 5.10) to improve previous kernel
versions testing as well.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220909103901.1503436-1-mic@digikod.net
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef784eebb56425eed6e9b16e7d47e5c00dcf9c38 upstream.
After a full run of a make_min_config test, I noticed there were a lot of
CONFIGs still enabled that really should not be. Looking at them, I
noticed they were all defined as "default y". The issue is that the test
simple removes the config and re-runs make oldconfig, which enables it
again because it is set to default 'y'. Instead, explicitly disable the
config with writing "# CONFIG_FOO is not set" to the file to keep it from
being set again.
With this change, one of my box's minconfigs went from 768 configs set,
down to 521 configs set.
Link: https://lkml.kernel.org/r/20221202115936.016fce23@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 0a05c769a9de5 ("ktest: Added config_bisect test type")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26df05a8c1420ad3de314fdd407e7fc2058cc7aa upstream.
grub2 has submenus where to use grub-reboot, it requires:
grub-reboot X>Y
where X is the main index and Y is the submenu. Thus if you have:
menuentry 'Debian GNU/Linux' --class debian --class gnu-linux ...
[...]
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option ...
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64 (recovery mode)' --class debian --class gnu-linux ...
[...]
}
menuentry 'Debian GNU/Linux, with Linux test' --class debian --class gnu-linux ...
[...]
}
And wanted to boot to the "Linux test" kernel, you need to run:
# grub-reboot 1>2
As 1 is the second top menu (the submenu) and 2 is the third of the sub
menu entries.
Have the grub.cfg parsing for grub2 handle such cases.
Cc: stable@vger.kernel.org
Fixes: a15ba91361d46 ("ktest: Add support for grub2")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the stable backport of commit 05c2224d4b04 ("KVM: selftests: Fix
number of pages for memory slot in memslot_modification_stress_test"),
which caused memslot_modification_stress_test.c build failures due to
trying to access private members of struct kvm_vm.
v6.0 commit b530eba14c70 ("KVM: selftests: Get rid of
kvm_util_internal.h") and some other commits got rid of the accessors
and made all of the KVM data structures public. Keep using the accessors
in older kernels.
There is no corresponding upstream commit for this change.
Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fc60e2ff972d3dca836bff0b08cbe503c4ca1ce ]
$number + > bash means redirect FD $number, e.g. commonly
used 2> redirects stderr (fd 2). The test uses 8192> to
write the number 8192 to a file, this results in:
./devlink.sh: line 499: 8192: Bad file descriptor
Oddly the test also papers over this issue by checking
for failure (expecting an error rather than success)
so it passes, anyway.
Fixes: ff18176ad806 ("selftests: Add a test of large binary to devlink health test")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87091063df5d4845d1db0761a9ed5510c4756a96 ]
This tests that we return errors as documented, and also that the kfunc
calls work from both XDP and TC hooks.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-8-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: a8dfde09c901 ("selftests/bpf: Select CONFIG_FUNCTION_ERROR_INJECTION")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f4ab7da904ab7027ccd43ddb4f0094e932a5877 ]
In check_all_cpu_dscr_defaults, opendir() opens the directory stream.
Add missing closedir() in the error path to release it.
In check_cpu_dscr_default, open() creates an open file descriptor.
Add missing close() in the error path to release it.
Fixes: ebd5858c904b ("selftests/powerpc: Add test for all DSCR sysfs interfaces")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221205084429.570654-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d7cfb48d81353e826493d24c7cec7360950968f ]
icmp conntrack will set icmp redirects as RELATED, but icmpv6 will not
do this.
For icmpv6, only icmp errors (code <= 128) are examined for RELATED state.
ICMPV6 Redirects are part of neighbour discovery mechanism, those are
handled by marking a selected subset (e.g. neighbour solicitations) as
UNTRACKED, but not REDIRECT -- they will thus be flagged as INVALID.
Add minimal support for REDIRECTs. No parsing of neighbour options is
added for simplicity, so this will only check that we have the embeeded
original header (ND_OPT_REDIRECT_HDR), and then attempt to do a flow
lookup for this tuple.
Also extend the existing test case to cover redirects.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Eric Garver <eric@garver.life>
Link: https://github.com/firewalld/firewalld/issues/1046
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Garver <eric@garver.life>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c93924267fe6f2b44af1849f714ae9cd8117a9cd ]
Add checking of the test return value, otherwise it will report success
forever for test_create_read().
Fixes: dff6d2ae56d0 ("selftests/efivarfs: clean up test files from test_create*()")
Signed-off-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cc81d5c81af0dee54da9a67a3ebe4be076a13db ]
syscall(3) returns -1 and sets errno on error, unlike "syscall"
instruction.
Systems which have <= 32/64 CPUs are unaffected. Test won't bounce
to all CPUs before completing if there are more of them.
Link: https://lkml.kernel.org/r/Y1bUiT7VRXlXPQa1@p183
Fixes: 1f5bd0547654 ("proc: selftests: test /proc/uptime")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1d6cd88c8973cfb08ee85722488b1d6d5d16327 ]
In some platform, the schedule event may came slowly, delay 100ms can't
cover it.
I was notice that on my board which running in low cpu_freq,and this
selftests allways gose fail.
So maybe we can check more times here to wait longer.
Fixes: 43bb45da82f9 ("selftests: ftrace: Add a selftest to test event enable/disable func trigger")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a30d3e3491dc562384e9f15b201a8a25b57439f ]
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0d999348e01df03e0a7f550351f3907fabbf611 ]
Cited commit added the table ID to the FIB info structure, but did not
properly initialize it when table ID 0 is used. This can lead to a route
in the default VRF with a preferred source address not being flushed
when the address is deleted.
Consider the following example:
# ip address add dev dummy1 192.0.2.1/28
# ip address add dev dummy1 192.0.2.17/28
# ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100
# ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Both routes are installed in the default VRF, but they are using two
different FIB info structures. One with a metric of 100 and table ID of
254 (main) and one with a metric of 200 and table ID of 0. Therefore,
when the preferred source address is deleted from the default VRF,
the second route is not flushed:
# ip address del dev dummy1 192.0.2.17/28
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Fix by storing a table ID of 254 instead of 0 in the route configuration
structure.
Add a test case that fails before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [FAIL]
Tests passed: 8
Tests failed: 1
And passes after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [ OK ]
Tests passed: 9
Tests failed: 0
Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Reported-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f96a3d74554df537b6db5c99c27c80e7afadc8d1 ]
Cited commit added the table ID to the FIB info structure, but did not
prevent structures with different table IDs from being consolidated.
This can lead to routes being flushed from a VRF when an address is
deleted from a different VRF.
Fix by taking the table ID into account when looking for a matching FIB
info. This is already done for FIB info structures backed by a nexthop
object in fib_find_info_nh().
Add test cases that fail before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [FAIL]
TEST: Route in default VRF not removed [ OK ]
RTNETLINK answers: File exists
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [FAIL]
Tests passed: 6
Tests failed: 2
And pass after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Tests passed: 8
Tests failed: 0
Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85a0506c073332a3057f5a9635fa0d4db5a8e03b ]
When testing in kci_test_ipsec_offload, srcip is configured as $dstip,
it should add xfrm policy rule in instead of out.
The test result of this patch is as follows:
PASS: ipsec_offload
Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221201082246.14131-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd5e1e42826f18147afb0ba07e6a815f52cf8bcb ]
The `nettest` binary, built from `selftests/net/nettest.c`,
was expected to be found in the path during test execution of
`fcnal-test.sh` and `pmtu.sh`, leading to tests getting
skipped when the binary is not installed in the system, as can
be seen in these logs found in the wild [1]:
# TEST: vti4: PMTU exceptions [SKIP]
[ 350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
[ 350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
# 'nettest' command not found; skipping tests
# xfrm6udp not supported
# TEST: vti6: PMTU exceptions (ESP-in-UDP) [SKIP]
[ 351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready
[ 351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready
# 'nettest' command not found; skipping tests
# xfrm4udp not supported
The `unicast_extensions.sh` tests also rely on `nettest`, but
it runs fine there because it looks for the binary in the
current working directory [2]:
The same mechanism that works for the Unicast extensions tests
is here copied over to the PMTU and functional tests.
[1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221
[2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5082d386eee7e8ec46fa8581932c81a4961dcef ]
When the kernel receives a route deletion request from user space it
tries to delete a route that matches the route attributes specified in
the request.
If only prefix information is specified in the request, the kernel
should delete the first matching FIB alias regardless of its associated
FIB info. However, an error is currently returned when the FIB info is
backed by a nexthop object:
# ip nexthop add id 1 via 192.0.2.2 dev dummy10
# ip route add 198.51.100.0/24 nhid 1
# ip route del 198.51.100.0/24
RTNETLINK answers: No such process
Fix by matching on such a FIB info when legacy nexthop attributes are
not specified in the request. An earlier check already covers the case
where a nexthop ID is specified in the request.
Add tests that cover these flows. Before the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [FAIL]
Tests passed: 11
Tests failed: 1
After the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [ OK ]
Tests passed: 12
Tests failed: 0
No regressions in other tests:
# ./fib_nexthops.sh
...
Tests passed: 228
Tests failed: 0
# ./fib_tests.sh
...
Tests passed: 186
Tests failed: 0
Cc: stable@vger.kernel.org
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e690 ("net: ipv4: fix route with nexthop object delete warning")
Fixes: 61b91eb33a69 ("ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221124210932.2470010-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61b91eb33a69c3be11b259c5ea484505cd79f883 ]
Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match:
fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961
fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753
inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874
Separate nexthop objects are mutually exclusive with the legacy
multipath spec. Fix fib_nh_match to return if the config for the
to be deleted route contains a multipath spec while the fib_info
is using a nexthop object.
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e690 ("net: ipv4: fix route with nexthop object delete warning")
Reported-by: Gwangun Jung <exsociety@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d5082d386eee ("ipv4: Fix route deletion when nexthop info is not specified")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 692930cc435099580a4b9e32fa781b0688c18439 ]
I made a stupid typo when adding the nexthop route warning selftest and
added both $IP and ip after it (double ip) on the cleanup path. The
error doesn't show up when running the test, but obviously it doesn't
cleanup properly after it.
Fixes: 392baa339c6a ("selftests: net: add delete nexthop route warning test")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d5082d386eee ("ipv4: Fix route deletion when nexthop info is not specified")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 392baa339c6a42a2cb088e5e5df2b59b8f89be24 ]
Add a test which causes a WARNING on kernels which treat a
nexthop route like a normal route when comparing for deletion and a
device is specified. That is, a route is found but we hit a warning while
matching it. The warning is from fib_info_nh() in include/net/nexthop.h
because we run it on a fib_info with nexthop object. The call chain is:
inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a
nexthop fib_info and also with fc_oif set thus calling fib_info_nh on
the fib_info and triggering the warning).
Repro steps:
$ ip nexthop add id 12 via 172.16.1.3 dev veth1
$ ip route add 172.16.101.1/32 nhid 12
$ ip route delete 172.16.101.1/32 dev veth1
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: d5082d386eee ("ipv4: Fix route deletion when nexthop info is not specified")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de88b95c4d436d78afc0266a0bed76c35ddeb62 ]
The estimated time was supposing the rate was expressed in mibit
(bit * 1024^2) but it is in mbit (bit * 1000^2).
This makes the threshold higher but in a more realistic way to avoid
false positives reported by CI instances.
Before this patch, the thresholds were at 7561/4005ms and now they are
at 7906/4178ms.
While at it, also fix a typo in the linked comment, spotted by Mat.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/310
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
