IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 66fbfb35da47f391bdadf9fa7ceb88af4faa9022 upstream.
Problem can be reproduced by unloading snd_soc_simple_card, because in
devm_get_clk_from_child() devres data is allocated as `struct clk`, but
devm_clk_release() expects devres data to be `struct devm_clk_state`.
KASAN report:
==================================================================
BUG: KASAN: slab-out-of-bounds in devm_clk_release+0x20/0x54
Read of size 8 at addr ffffff800ee09688 by task (udev-worker)/287
Call trace:
dump_backtrace+0xe8/0x11c
show_stack+0x1c/0x30
dump_stack_lvl+0x60/0x78
print_report+0x150/0x450
kasan_report+0xa8/0xf0
__asan_load8+0x78/0xa0
devm_clk_release+0x20/0x54
release_nodes+0x84/0x120
devres_release_all+0x144/0x210
device_unbind_cleanup+0x1c/0xac
really_probe+0x2f0/0x5b0
__driver_probe_device+0xc0/0x1f0
driver_probe_device+0x68/0x120
__driver_attach+0x140/0x294
bus_for_each_dev+0xec/0x160
driver_attach+0x38/0x44
bus_add_driver+0x24c/0x300
driver_register+0xf0/0x210
__platform_driver_register+0x48/0x54
asoc_simple_card_init+0x24/0x1000 [snd_soc_simple_card]
do_one_initcall+0xac/0x340
do_init_module+0xd0/0x300
load_module+0x2ba4/0x3100
__do_sys_init_module+0x2c8/0x300
__arm64_sys_init_module+0x48/0x5c
invoke_syscall+0x64/0x190
el0_svc_common.constprop.0+0x124/0x154
do_el0_svc+0x44/0xdc
el0_svc+0x14/0x50
el0t_64_sync_handler+0xec/0x11c
el0t_64_sync+0x14c/0x150
Allocated by task 287:
kasan_save_stack+0x38/0x60
kasan_set_track+0x28/0x40
kasan_save_alloc_info+0x20/0x30
__kasan_kmalloc+0xac/0xb0
__kmalloc_node_track_caller+0x6c/0x1c4
__devres_alloc_node+0x44/0xb4
devm_get_clk_from_child+0x44/0xa0
asoc_simple_parse_clk+0x1b8/0x1dc [snd_soc_simple_card_utils]
simple_parse_node.isra.0+0x1ec/0x230 [snd_soc_simple_card]
simple_dai_link_of+0x1bc/0x334 [snd_soc_simple_card]
__simple_for_each_link+0x2ec/0x320 [snd_soc_simple_card]
asoc_simple_probe+0x468/0x4dc [snd_soc_simple_card]
platform_probe+0x90/0xf0
really_probe+0x118/0x5b0
__driver_probe_device+0xc0/0x1f0
driver_probe_device+0x68/0x120
__driver_attach+0x140/0x294
bus_for_each_dev+0xec/0x160
driver_attach+0x38/0x44
bus_add_driver+0x24c/0x300
driver_register+0xf0/0x210
__platform_driver_register+0x48/0x54
asoc_simple_card_init+0x24/0x1000 [snd_soc_simple_card]
do_one_initcall+0xac/0x340
do_init_module+0xd0/0x300
load_module+0x2ba4/0x3100
__do_sys_init_module+0x2c8/0x300
__arm64_sys_init_module+0x48/0x5c
invoke_syscall+0x64/0x190
el0_svc_common.constprop.0+0x124/0x154
do_el0_svc+0x44/0xdc
el0_svc+0x14/0x50
el0t_64_sync_handler+0xec/0x11c
el0t_64_sync+0x14c/0x150
The buggy address belongs to the object at ffffff800ee09600
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 136 bytes inside of
256-byte region [ffffff800ee09600, ffffff800ee09700)
The buggy address belongs to the physical page:
page:000000002d97303b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4ee08
head:000000002d97303b order:1 compound_mapcount:0 compound_pincount:0
flags: 0x10200(slab|head|zone=0)
raw: 0000000000010200 0000000000000000 dead000000000122 ffffff8002c02480
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff800ee09580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff800ee09600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffff800ee09680: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff800ee09700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff800ee09780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fixes: abae8e57e49a ("clk: generalize devm_clk_get() a bit")
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/20230805084847.3110586-1-andrej.skvortzov@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 349b5bed539b491b7894a5186a895751fd8ba6c7 ]
Networking resets in IPQ6018 all use bitmask as they require multiple
bits to be set and cleared instead of a single bit.
So, current networking resets have the same register and bit 0 set which
is clearly incorrect.
Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526190855.2941291-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a5210893625f89723ea210d7c630b730abb37ad ]
This patch adds the support for giving the complete bitmask
in reset structure and reset operation will use this bitmask
for all reset operations.
Currently, reset structure only takes a single bit for each reset
and then calculates the bitmask by using the BIT() macro.
However, this is not sufficient anymore for newer SoC-s like IPQ8074,
IPQ6018 and more, since their networking resets require multiple bits
to be asserted in order to properly reset the HW block completely.
So, in order to allow asserting multiple bits add "bitmask" field to
qcom_reset_map, and then use that bitmask value if its populated in the
driver, if its not populated, then we just default to existing behaviour
and calculate the bitmask on the fly.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
Stable-dep-of: 349b5bed539b ("clk: qcom: ipq6018: fix networking resets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cb8a39b6781ea23accd1fa93b3ad000d0948aec ]
The amount of time required between asserting and deasserting the reset
signal can vary depending on the involved hardware component. Sometimes
1 us might not be enough and a larger delay is necessary to conform to
the specifications.
Usually this is worked around in the consuming drivers, by replacing
reset_control_reset() with a sequence of reset_control_assert(), waiting
for a custom delay, followed by reset_control_deassert().
However, in some cases the driver making use of the reset is generic and
can be used with different reset controllers. In this case the reset
time requirement is better handled directly by the reset controller
driver.
Make this possible by adding an "udelay" field to the qcom_reset_map
that allows setting a different reset delay (in microseconds).
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com
Stable-dep-of: 349b5bed539b ("clk: qcom: ipq6018: fix networking resets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e4d179532423f299554cd0dedabdd9d2fdd238d ]
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 15d09e830bbc ("clk: qcom: camcc: Add camera clock controller driver for SC7180")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501142932.13049-1-quic_tdas@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fb933e56f77a57ef7cfc59fc34cbbf1b1fa31ff ]
devm_clk_notifier_register() allocates a devres resource for clk
notifier but didn't register that to the device, so the notifier didn't
get unregistered on device detach and the allocated resource was leaked.
Fix the issue by registering the resource through devres_add().
This issue was found with kmemleak on a Chromebook.
Fixes: 6d30d50d037d ("clk: add devm variant of clk_notifier_register")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20230619112253.v2.1.I13f060c10549ef181603e921291bdea95f83033c@changeid
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 267ad94b13c53d8c99a336f0841b1fa1595b1d0f ]
Pointers from synth_clock_names[] should be freed at the end of probe
either on probe success or failure path.
Fixes: b7bbf6ec4940 ("clk: si5341: Allow different output VDD_SEL values")
Fixes: 9b13ff4340df ("clk: si5341: Add sysfs properties to allow checking/resetting device faults")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230530093913.1656095-6-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2560114c06d7a752b3f4639f28cece58fed11267 ]
In case devm_clk_hw_register() fails for one of synth clocks the probe
continues. Later on, when registering output clocks which have as parents
all the synth clocks, in case there is registration failure for at least
one synth clock the information passed to clk core for registering output
clock is not right: init.num_parents is fixed but init.parents may contain
an array with less parents.
Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230530093913.1656095-4-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53a06e5924c0d43c11379a08c5a78529c3e61595 ]
The tegra and tegra needs to be freed in the error handling path, otherwise
it will be leaked.
Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221209094124.71043-1-yuancan@huawei.com
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 878b02d5f3b56cb090dbe2c70c89273be144087f ]
Replace of_iomap() and kzalloc() with devm_of_iomap() and devm_kzalloc()
which can automatically release the related memory when the device
or driver is removed or unloaded to avoid potential memory leak.
In this case, iounmap(anatop_base) in line 427,433 are removed
as manual release is not required.
Besides, referring to clk-imx8mq.c, check the return code of
of_clk_add_hw_provider, if it returns negtive, print error info
and unregister hws, which makes the program more robust.
Fixes: 9c140d992676 ("clk: imx: Add support for i.MX8MP clock driver")
Signed-off-by: Yuxing Liu <lyx2022@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20230503070607.2462-1-lyx2022@hust.edu.cn
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 188d070de9132667956f5aadd98d2bd87d3eac89 ]
Use devm_of_iomap() instead of of_iomap() to automatically handle
the unused ioremap region.
If any error occurs, regions allocated by kzalloc() will leak,
but using devm_kzalloc() instead will automatically free the memory
using devm_kfree().
Fixes: daeb14545514 ("clk: imx: imx8mn: Switch to clk_hw based API")
Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Hao Luo <m202171776@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230411015107.2645-1-m202171776@hust.edu.cn
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 632c60ecd25dbacee54d5581fe3aeb834b57010a ]
This loop is freeing "clk" so it needs to use list_for_each_entry_safe().
Otherwise it dereferences a freed variable to get the next item on the
loop.
Fixes: 77d8f3068c63 ("clk: imx: scu: add two cells binding support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/0793fbd1-d2b5-4ec2-9403-3c39343a3e2d@kili.mountain
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4a2adbf3586efa12fe78b9dec047423e01f3010 ]
Older gcc versions get confused by comparing a u32 value to a negative
constant in a switch()/case block:
drivers/clk/tegra/clk-tegra20.c: In function 'tegra20_clk_measure_input_freq':
drivers/clk/tegra/clk-tegra20.c:581:2: error: case label does not reduce to an integer constant
case OSC_CTRL_OSC_FREQ_12MHZ:
^~~~
drivers/clk/tegra/clk-tegra20.c:593:2: error: case label does not reduce to an integer constant
case OSC_CTRL_OSC_FREQ_26MHZ:
Make the constants unsigned instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230227085914.2560984-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 933bf364e152cd60902cf9585c2ba310d593e69f upstream.
clk_cifout is derived from clk_cifout_src through an integer divider
limited to 32. clk_cifout_src is a child of either cpll, gpll or npll
without any possibility of a divider of any sort. The default clock
parent is cpll.
Let's allow clk_cifout to ask its parent clk_cifout_src to reparent in
order to find the real closest possible rate for clk_cifout and not one
derived from cpll only.
Cc: stable@vger.kernel.org # 4.10+
Fixes: fd8bc829336a ("clk: rockchip: fix the rk3399 cifout clock")
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221117-rk3399-cifout-set-rate-parent-v1-0-432548d04081@theobroma-systems.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a500e0bc97b6cb3c0d9859e81973b8dd07d1b7b ]
On SM8350 platform the PCIe PIPE clocks require additional handling to
function correctly. They are to be switched to the tcxo source before
turning PCIe GDSCs off and should be switched to PHY PIPE source once
they are working. Switch PCIe PHY clocks to use clk_regmap_phy_mux_ops,
which provide support for this dance.
Fixes: 44c20c9ed37f ("clk: qcom: gcc: Add clock driver for SM8350")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230412134829.3686467-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74e4190cdebe5a4aa099185edb4db418fc9883e3 ]
On recent Qualcomm platforms the QMP PIPE clocks feed into a set of
muxes which must be parked to the "safe" source (bi_tcxo) when
corresponding GDSC is turned off and on again. Currently this is
handcoded in the PCIe driver by reparenting the gcc_pipe_N_clk_src
clock. However the same code sequence should be applied in the
pcie-qcom endpoint, USB3 and UFS drivers.
Rather than copying this sequence over and over again, follow the
example of clk_rcg2_shared_ops and implement this parking in the
enable() and disable() clock operations. Supplement the regmap-mux with
the new clk_regmap_phy_mux type, which implements such multiplexers
as a simple gate clocks.
This is possible since each of these multiplexers has just two clock
sources: one coming from the PHY and a reference (XO) one. If the clock
is running off the from-PHY source, report it as enabled. Report it as
disabled otherwise (if it uses reference source).
This way the PHY will disable the pipe clock before turning off the
GDSC, which in turn would lead to disabling corresponding pipe_clk_src
(and thus it being parked to a safe, reference clock source). And vice
versa, after enabling the GDSC the PHY will enable the pipe clock, which
would cause pipe_clk_src to be switched from a safe source to the
working one.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220608105238.2973600-2-dmitry.baryshkov@linaro.org
Stable-dep-of: 1a500e0bc97b ("clk: qcom: gcc-sm8350: fix PCIe PIPE clocks handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 996c32b745a15a637e8244a25f06b74acce98976 ]
The vast majority of shared RCGs were not marked as such. Fix it.
Fixes: cbe63bfdc54f ("clk: qcom: Add Global Clock controller (GCC) driver for SM6115")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230404224719.909746-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27a6e1b09a782517fddac91259970ac466a3f7b6 ]
When returning from of_parse_phandle_with_args(), the np member of the
of_phandle_args structure should be put after usage. Add missing
of_node_put() calls in both __set_clk_parents() and __set_clk_rates().
Fixes: 86be408bfbd8 ("clk: Support for clock parents and rates assigned from device tree")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20230131083227.10990-1-clement.leger@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47d43086531f10539470a63e8ad92803e686a3dd ]
In sprd clock driver, regmap_config.max_register was set to a fixed value
which is likely larger than the address range configured in device tree,
when reading registers through debugfs it would cause access violation.
Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20230316023624.758204-1-chunyan.zhang@unisoc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ffad67784a097beccf34d297ddd1b0773b3b8a3 ]
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 3a49afb84ca0 ("clk: enable hi655x common clk automatically")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Riku Voipio <riku.voipio@linaro.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20230226053953.4681-3-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7256d1f4618b40792d1e9b9b6cb1406a13cad2dd ]
Commit 036177310bac ("clk: mxl: Switch from direct readl/writel based IO
to regmap based IO") introduced code resulting in below warning issued
by the smatch static checker.
drivers/clk/x86/clk-lgm.c:441 lgm_cgu_probe() warn: passing zero to 'PTR_ERR'
Fix the warning by replacing incorrect IS_ERR_OR_NULL() with IS_ERR().
Fixes: 036177310bac ("clk: mxl: Switch from direct readl/writel based IO to regmap based IO")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/49e339d4739e4ae4c92b00c1b2918af0755d4122.1666695221.git.rtanwar@maxlinear.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 106ef3bda21006fe37b62c85931230a6355d78d3 ]
One of the clock entry "dcl" clk has some HW limitations. One is that
its rate can only by changed by changing its parent clk's rate & two is
that HW does not support enable/disable for this clk.
Handle above two limitations by adding relevant flags. Add standard flag
CLK_SET_RATE_PARENT to handle rate change and add driver internal flag
DIV_CLK_NO_MASK to handle enable/disable.
Fixes: d058fd9e8984 ("clk: intel: Add CGU clock driver for a new SoC")
Reviewed-by: Yi xin Zhu <yzhu@maxlinear.com>
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/a4770e7225f8a0c03c8ab2ba80434a4e8e9afb17.1665642720.git.rtanwar@maxlinear.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5d49bd369b8588c0ee9d4d0a2c0160558a3ab69 ]
In MxL's LGM SoC, gate clocks can be controlled either from CGU clk driver
i.e. this driver or directly from power management driver/daemon. It is
dependent on the power policy/profile requirements of the end product.
To support such use cases, provide option to override gate clks enable/disable
by adding a flag GATE_CLK_HW which controls if these gate clks are controlled
by HW i.e. this driver or overridden in order to allow it to be controlled
by power profiles instead.
Reviewed-by: Yi xin Zhu <yzhu@maxlinear.com>
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/bdc9c89317b5d338a6c4f1d49386b696e947a672.1665642720.git.rtanwar@maxlinear.com
[sboyd@kernel.org: Add braces on many line if-else]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 106ef3bda210 ("clk: mxl: Fix a clk entry by adding relevant flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eaabee88a88a26b108be8d120fc072dfaf462cef ]
Patch 1/4 of this patch series switches from direct readl/writel
based register access to regmap based register access. Instead
of using direct readl/writel, regmap API's are used to read, write
& read-modify-write clk registers. Regmap API's already use their
own spinlocks to serialize the register accesses across multiple
cores in which case additional driver spinlocks becomes redundant.
Hence, remove redundant spinlocks from driver in this patch 2/4.
Reviewed-by: Yi xin Zhu <yzhu@maxlinear.com>
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/a8a02c8773b88924503a9fdaacd37dd2e6488bf3.1665642720.git.rtanwar@maxlinear.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 106ef3bda210 ("clk: mxl: Fix a clk entry by adding relevant flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 036177310bac5534de44ff6a7b60a4d2c0b6567c ]
Earlier version of driver used direct io remapped register read
writes using readl/writel. But we need secure boot access which
is only possible when registers are read & written using regmap.
This is because the security bus/hook is written & coupled only
with regmap layer.
Switch the driver from direct readl/writel based register accesses
to regmap based register accesses.
Additionally, update the license headers to latest status.
Reviewed-by: Yi xin Zhu <yzhu@maxlinear.com>
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/2610331918206e0e3bd18babb39393a558fb34f9.1665642720.git.rtanwar@maxlinear.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: 106ef3bda210 ("clk: mxl: Fix a clk entry by adding relevant flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ecfb9f404771dde909ce7743df954370933c3be2 upstream.
The previous algorithm was pretty broken.
- The inner loop had a '(m > m_max)' condition, and the value of 'm'
would increase in each iteration;
- Each iteration would actually multiply 'm' by two, so it is not needed
to re-compute the whole equation at each iteration;
- It would loop until (m & 1) == 0, which means it would loop at most
once.
- The outer loop would divide the 'n' value by two at the end of each
iteration. This meant that for a 12 MHz parent clock and a 1.2 GHz
requested clock, it would first try n=12, then n=6, then n=3, then
n=1, none of which would work; the only valid value is n=2 in this
case.
Simplify this algorithm with a single for loop, which decrements 'n'
after each iteration, addressing all of the above problems.
Fixes: bdbfc029374f ("clk: ingenic: Add support for the JZ4760")
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221214123704.7305-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5174e5b0d1b669a489524192b6adcbb3c54ebc72 ]
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.
Fixes: 3ff6e0d8d64d ("clk: samsung: Add support to register rate_table for samsung plls")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123032015.63980-1-xiujianfeng@huawei.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d676d3a3717cf726d3affedbe5ba98fc4ccad7b3 ]
Currently div2 value is applied to the wrong bits. This is caused by a
bug in the code where the shift is done only for lpl, for anything
else the mask is not shifted to the correct bits.
Fix this by correctly shift if lpl is not supported.
Fixes: 4d7dc77babfe ("clk: qcom: Add support for Krait clocks")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221108215625.30186-1-ansuelsmth@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff1ccf59eaffd192efe21f7de9fb0c130faf1b1b ]
The sc7180 lpass clock controller's pm_runtime usage wasn't broken
quite as spectacularly as the sc7280's pm_runtime usage, but it was
still broken. Putting some printouts in at boot showed me this (with
serial console enabled, which makes the prints slow and thus changes
timing):
[ 3.109951] DOUG: my_pm_clk_resume, usage=1
[ 3.114767] DOUG: my_pm_clk_resume, usage=1
[ 3.664443] DOUG: my_pm_clk_suspend, usage=0
[ 3.897566] DOUG: my_pm_clk_suspend, usage=0
[ 3.910137] DOUG: my_pm_clk_resume, usage=1
[ 3.923217] DOUG: my_pm_clk_resume, usage=0
[ 4.440116] DOUG: my_pm_clk_suspend, usage=-1
[ 4.444982] DOUG: my_pm_clk_suspend, usage=0
[ 14.170501] DOUG: my_pm_clk_resume, usage=1
[ 14.176245] DOUG: my_pm_clk_resume, usage=0
...or this w/out serial console:
[ 0.556139] DOUG: my_pm_clk_resume, usage=1
[ 0.556279] DOUG: my_pm_clk_resume, usage=1
[ 1.058422] DOUG: my_pm_clk_suspend, usage=-1
[ 1.058464] DOUG: my_pm_clk_suspend, usage=0
[ 1.186250] DOUG: my_pm_clk_resume, usage=1
[ 1.186292] DOUG: my_pm_clk_resume, usage=0
[ 1.731536] DOUG: my_pm_clk_suspend, usage=-1
[ 1.731557] DOUG: my_pm_clk_suspend, usage=0
[ 10.288910] DOUG: my_pm_clk_resume, usage=1
[ 10.289496] DOUG: my_pm_clk_resume, usage=0
It seems to be doing roughly the right sequence of calls, but just
like with sc7280 this is more by luck than anything. Having a usage of
-1 is just not OK.
Let's fix this like we did with sc7280.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Fixes: ce8c195e652f ("clk: qcom: lpasscc: Introduce pm autosuspend for SC7180")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104064055.2.I49b25b9bda9430fc7ea21e5a708ca5a0aced2798@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7fa365ff66f16772dc06b480cd78f858d10856b ]
There is no occurrence of the hdmi oscillator in the reference manual
(document IMX8MNRM Rev 2, 07/2022). Further, if we consider the indexes
76-81 and 134 of the "Clock Root" table of chapter 5 of the RM, there is
no entry for the source select bits 101b, which is the setting referenced
by "osc_hdmi".
Fix by renaming "osc_hdmi" with "dummy", a clock which has already been
used for missing source select bits.
Tested on the BSH SystemMaster (SMM) S2 board.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a429c60baefd95ab43a2ce7f25d5b2d7a2e431df ]
The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.
As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ARM_M7_CLK_ROOT 0x8080 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV5
010 - SYSTEM_PLL2_DIV4
011 - M7_ALT_PLL_CLK
100 - SYSTEM_PLL1_CLK
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - SYSTEM_PLL3_CLK
... ... ...
but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.
So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.
The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 739a6a6bbdb793bd57938cb24aa5a6df89983546 ]
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.
Fixes: 90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123091201.199819-1-xiujianfeng@huawei.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac1c5a03d3772b1db25e8092f771aa33f6ae2f7e ]
USB controllers on SM8250 doesn't work after coming back from suspend.
This can be fixed by keeping the USB GDSCs in retention mode so that
hardware can keep them ON and put into rentention mode once the parent
domain goes to a low power state.
Fixes: 3e5770921a88 ("clk: qcom: gcc: Add global clock controller driver for SM8250")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102091320.66007-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02693e11611e082e3c4d8653e8af028e43d31164 ]
If condition (clkspec.np != pd->dev.of_node) is true, then the driver
ends up in an endless loop, forever, locking up the machine.
Fixes: aad03a66f902 ("clk: renesas: r9a06g032: Add clock domain support")
Reviewed-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Gareth Williams <gareth.williams.jx@renesas.com>
Link: https://lore.kernel.org/r/20221028113834.7496-1-marex@denx.de
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b3d743fc9e2542822826890b482afabf0e7522a ]
The release function is called with a pointer to the memory returned by
devres_alloc(). I was confused about that by the code before the
generalization that used a struct clk **ptr.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: abae8e57e49a ("clk: generalize devm_clk_get() a bit")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220620171815.114212-1-u.kleine-koenig@pengutronix.de
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ef9651e9792b08eb310c6beb202cbc947f43cab ]
When a driver keeps a clock prepared (or enabled) during the whole
lifetime of the driver, these helpers allow to simplify the drivers.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220520075737.758761-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: c61bfb1cb63d ("mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abae8e57e49aa75f6db76aa866c775721523908f ]
Allow to add an exit hook to devm managed clocks. Also use
clk_get_optional() in devm_clk_get_optional instead of open coding it.
The generalisation will be used in the next commit to add some more
devm_clk helpers.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220520075737.758761-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: c61bfb1cb63d ("mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffa20aa581cf5377fc397b0d0ff9d67ea823629b ]
There are few GPU clocks which are powering up the memories
and thus enable the FORCE_MEM_PERIPH always for these clocks
to force the periph_on signal to remain active during halt
state of the clock.
Fixes: a3cc092196ef ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Fixes: 3e0f01d6c7e7 ("clk: qcom: Add graphics clock controller driver for SC7280")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Link: https://lore.kernel.org/r/1666159535-6447-1-git-send-email-quic_c_skakit@quicinc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
