IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit a82d62f708545d22859584e0e0620da8e3759bbc upstream.
This reverts commit eb26dfe8aa7eeb5a5aa0b7574550125f8aa4c3b3.
Commit eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO
bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX
(0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in
1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged
on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always
takes precedence over the ASIX entry even since it was initially
merged, code in that commit is always unreachable.
In my tests, adding the FIFO workaround to pci_netmos_init() makes no
difference, and the vendor driver also does not have such workaround.
Given that the code was never used for over a decade, it's safe to
revert it.
Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on
their newer AX99100 PCIe serial controllers released on 2016. The FIFO
workaround should not be intended for these newer controllers, and it
was never implemented in vendor driver.
Fixes: eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug")
Cc: stable <stable@kernel.org>
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 490937d479abe5f6584e69b96df066bc87be92e9 upstream.
The 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14),
however we index it starting from 1, not 0, to match real port numbers.
This can lead to writing port config past 'pconfig' bounds and
overwriting next member of 'qcom_swrm_ctrl' struct. Reported also by
smatch:
drivers/soundwire/qcom.c:1269 qcom_swrm_get_port_config() error: buffer overflow 'ctrl->pconfig' 14 <= 14
Fixes: 9916c02ccd74 ("soundwire: qcom: cleanup internal port config indexing")
Cc: <stable@vger.kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202305201301.sCJ8UDKV-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601102525.609627-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2a2ab039bd58f51355e33d7d3fc64605d7f870d upstream.
When dev_pm_opp_of_find_icc_paths() in _allocate_opp_table() returns
-EPROBE_DEFER, the opp_table is freed again, to wait until all the
interconnect paths are available.
However, if the OPP table is using required-opps then it may already
have been added to the global lazy_opp_tables list. The error path
does not remove the opp_table from the list again.
This can cause crashes later when the provider of the required-opps
is added, since we will iterate over OPP tables that have already been
freed. E.g.:
Unable to handle kernel NULL pointer dereference when read
CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.4.0-rc3
PC is at _of_add_opp_table_v2 (include/linux/of.h:949
drivers/opp/of.c:98 drivers/opp/of.c:344 drivers/opp/of.c:404
drivers/opp/of.c:1032) -> lazy_link_required_opp_table()
Fix this by calling _of_clear_opp_table() to remove the opp_table from
the list and clear other allocated resources. While at it, also add the
missing mutex_destroy() calls in the error path.
Cc: stable@vger.kernel.org
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 7eba0c7641b0 ("opp: Allow lazy-linking of required-opps")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c57fa0037024c92c2ca34243e79e857da5d2c0a9 upstream.
According to the datasheets of supported meson SoCs length of ADC_CLK_DIV
field is 6-bit. Although all supported SoCs have the register
with that field documented later SoCs use external clock rather than
ADC internal clock so this patch affects only meson8 family (S8* SoCs).
Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
Signed-off-by: George Stark <GNStark@sberdevices.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230606165357.42417-1-gnstark@sberdevices.ru
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9b0328d0b8b8298dfdc97cd8e0e2371d4bcc97b upstream.
Some ZHAOXIN xHCI controllers follow usb3.1 spec, but only support
gen1 speed 5Gbps. While in Linux kernel, if xHCI suspport usb3.1,
root hub speed will show on 10Gbps.
To fix this issue of ZHAOXIN xHCI platforms, read usb speed ID
supported by xHCI to determine root hub speed. And add a quirk
XHCI_ZHAOXIN_HOST for this issue.
[fix warning about uninitialized symbol -Mathias]
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Message-ID: <20230602144009.1225632-11-mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a865a652299f5666f3b785cbe758c5f57453036 upstream.
On some ZHAOXIN hosts, xHCI will prefetch TRB for performance
improvement. However this TRB prefetch mechanism may cross page boundary,
which may access memory not allocated by xHCI driver. In order to fix
this issue, two pages was allocated for a segment and only the first
page will be used. And add a quirk XHCI_ZHAOXIN_TRB_FETCH for this issue.
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Message-ID: <20230602144009.1225632-10-mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f927728186f0de1167262d6a632f9f7e96433d1a upstream.
On ZHAOXIN ZX-100 project, xHCI can't work normally after resume
from system Sx state. To fix this issue, when resume from system
Sx state, reinitialize xHCI instead of restore.
So, Add XHCI_RESET_ON_RESUME quirk for ZX-100 to fix issue of
resuming from system Sx state.
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Message-ID: <20230602144009.1225632-9-mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 257e6172ab36ebbe295a6c9ee9a9dd0fe54c1dc2 upstream.
If a client sends out a cap update dropping caps with the prior 'seq'
just before an incoming cap revoke request, then the client may drop
the revoke because it believes it's already released the requested
capabilities.
This causes the MDS to wait indefinitely for the client to respond
to the revoke. It's therefore always a good idea to ack the cap
revoke request with the bumped up 'seq'.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/61782
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a282a2f10539dce2aa619e71e1817570d557fc97 upstream.
ceph_frame_desc::fd_lens is an int array. decode_preamble() thus
effectively casts u32 -> int but the checks for segment lengths are
written as if on unsigned values. While reading in HELLO or one of the
AUTH frames (before authentication is completed), arithmetic in
head_onwire_len() can get duped by negative ctrl_len and produce
head_len which is less than CEPH_PREAMBLE_LEN but still positive.
This would lead to a buffer overrun in prepare_read_control() as the
preamble gets copied to the newly allocated buffer of size head_len.
Cc: stable@vger.kernel.org
Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Thelford Williams <thelford@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1995f15590ca222f91193ed11461862b450abfd6 upstream.
svc_create_memory_pool() is only called from stratix10_svc_drv_probe().
Most of resources in the probe are managed, but not this memremap() call.
There is also no memunmap() call in the file.
So switch to devm_memremap() to avoid a resource leak.
Cc: stable@vger.kernel.org
Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver")
Link: https://lore.kernel.org/all/783e9dfbba34e28505c9efa8bba41f97fd0fa1dc.1686109400.git.christophe.jaillet@wanadoo.fr/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Message-ID: <20230613211521.16366-1-dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 639949a7031e04c59ec91614eceb9543e9120f43 upstream.
Since commit 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal
active high") RS485 reception no longer works after a transmission.
The following scenario shows the problem:
1) Open a port in RS485 mode
2) Receive data from remote (OK)
3) Transmit data to remote (OK)
4) Receive data from remote (Nothing received)
In RS485 mode, imx_uart_start_tx() calls imx_uart_stop_rx() and, when the
transmission is complete, imx_uart_stop_tx() calls imx_uart_start_rx().
Since the above commit imx_uart_stop_rx() now sets the loopback bit but
imx_uart_start_rx() does not clear it causing the hardware to remain in
loopback mode and not receive external data.
Fix this by moving the existing loopback disable code to a helper function
and calling it from imx_uart_start_rx() too.
Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230616104838.2729694-1-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 832e231cff476102e8204a9e7bddfe5c6154a375 upstream.
When the best clk is searched, we iterate over all possible clk.
If we find a better match, the previous one, if any, needs to be freed.
If a better match has already been found, we still need to free the new
one, otherwise it leaks.
Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <cf3e0053d2fc7391b2d906a86cd01a5ef15fb9dc.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9c09546e903f1068acfa38e1ee18bded7114b37 upstream.
If clk_get_rate() fails, the clk that has just been allocated needs to be
freed.
Cc: <stable@vger.kernel.org> # v3.3+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Message-ID: <e4baf6039368f52e5a5453982ddcb9a330fc689e.1686412569.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27a826837ec9a3e94cc44bd9328b8289b0fcecd7 upstream.
The atmel_complete_tx_dma() function disables IRQs at the start
of the function by calling spin_lock_irqsave(&port->lock, flags);
There is no need to disable them a second time using the
spin_lock_irq() function and, in fact, doing so is a bug because
it will enable IRQs prematurely when we call spin_unlock_irq().
Just use spin_lock/unlock() instead without disabling or enabling
IRQs.
Fixes: 08f738be88bb ("serial: at91: add tx dma support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/cb7c39a9-c004-4673-92e1-be4e34b85368@moroto.mountain
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a590f03d8de7c4cb7ce4916dc7f2fd10711faabe upstream.
If moving the bo to system for swapout failed, we were leaking
a resource. Fix.
Fixes: bfa3357ef9ab ("drm/ttm: allocate resource object instead of embedding it v2")
Cc: Christian König <christian.koenig@amd.com>
Cc: "Christian König" <ckoenig.leichtzumerken@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230626091450.14757-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a774fe912ff09e39c2d3a3589c729330113f388 upstream.
In restore process worker, pinned BO cause update PTE fail, then
the function re-schedule the restore_work. This will generate dead loop.
Signed-off-by: gaba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 274d205cb59f43815542e04b42a9e6d0b9b95eff upstream.
The `DMUB_FW_VERSION` macro has a mistake in that the revision field
is off by one byte. The last byte is typically used for other purposes
and not a revision.
Cc: stable@vger.kernel.org
Cc: Sean Wang <sean.ns.wang@amd.com>
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Tsung-hua (Ryan) Lin <Tsung-hua.Lin@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea2c3c08554601b051d91403a241266e1cf490a5 upstream.
Per VM BOs must be marked as moved or otherwise their ranges are not
updated on use which might be necessary when the replace operation
splits mappings.
This fixes random GPU hangs when replacing sparse mappings from the
userspace, while OP_MAP/OP_UNMAP works fine because always valid BOs
are correctly handled there.
Cc: stable@vger.kernel.org
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bdba9d4a3baa758c2ca7f5b37b35c7b3391dc42 upstream.
If we disable vblank when entering self-refresh, vblank APIs (like
DRM_IOCTL_WAIT_VBLANK) no longer work. But user space is not aware when
we enter self-refresh, so this appears to be an API violation -- that
DRM_IOCTL_WAIT_VBLANK fails with EINVAL whenever the display is idle and
enters self-refresh.
The downstream driver used by many of these systems never used to
disable vblank for PSR, and in fact, even upstream, we didn't do that
until radically redesigning the state machine in commit 6c836d965bad
("drm/rockchip: Use the helpers for PSR").
Thus, it seems like a reasonable API fix to simply restore that
behavior, and leave vblank enabled.
Note that this appears to potentially unbalance the
drm_crtc_vblank_{off,on}() calls in some cases, but:
(a) drm_crtc_vblank_on() documents this as OK and
(b) if I do the naive balancing, I find state machine issues such that
we're not in sync properly; so it's easier to take advantage of (a).
This issue was exposed by IGT's kms_vblank tests, and reported by
KernelCI. The bug has been around a while (longer than KernelCI
noticed), but was only exposed once self-refresh was bugfixed more
recently, and so KernelCI could properly test it. Some other notes in:
https://lore.kernel.org/dri-devel/Y6OCg9BPnJvimQLT@google.com/
Re: renesas/master bisection: igt-kms-rockchip.kms_vblank.pipe-A-wait-forked on rk3399-gru-kevin
== Backporting notes: ==
Marking as 'Fixes' commit 6c836d965bad ("drm/rockchip: Use the helpers
for PSR"), but it probably depends on commit bed030a49f3e
("drm/rockchip: Don't fully disable vop on self refresh") as well.
We also need the previous patch ("drm/atomic: Allow vblank-enabled +
self-refresh "disable""), of course.
v3:
* no update
v2:
* skip unnecessary lock/unlock
Fixes: 6c836d965bad ("drm/rockchip: Use the helpers for PSR")
Cc: <stable@vger.kernel.org>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Link: https://lore.kernel.org/dri-devel/Y5itf0+yNIQa6fU4@sirena.org.uk/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.2.Ic07cba4ab9a7bd3618a9e4258b8f92ea7d10ae5a@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d0e3cac3517942a6e00eeecfe583a98715edb16 upstream.
The self-refresh helper framework overloads "disable" to sometimes mean
"go into self-refresh mode," and this mode activates automatically
(e.g., after some period of unchanging display output). In such cases,
the display pipe is still considered "on", and user-space is not aware
that we went into self-refresh mode. Thus, users may expect that
vblank-related features (such as DRM_IOCTL_WAIT_VBLANK) still work
properly.
However, we trigger the WARN_ONCE() here if a CRTC driver tries to leave
vblank enabled.
Add a different expectation: that CRTCs *should* leave vblank enabled
when going into self-refresh.
This patch is preparation for another patch -- "drm/rockchip: vop: Leave
vblank enabled in self-refresh" -- which resolves conflicts between the
above self-refresh behavior and the API tests in IGT's kms_vblank test
module.
== Some alternatives discussed: ==
It's likely that on many display controllers, vblank interrupts will
turn off when the CRTC is disabled, and so in some cases, self-refresh
may not support vblank. To support such cases, we might consider
additions to the generic helpers such that we fire vblank events based
on a timer.
However, there is currently only one driver using the common
self-refresh helpers (i.e., rockchip), and at least as of commit
bed030a49f3e ("drm/rockchip: Don't fully disable vop on self refresh"),
the CRTC hardware is powered enough to continue to generate vblank
interrupts.
So we chose the simpler option of leaving vblank interrupts enabled. We
can reevaluate this decision and perhaps augment the helpers if/when we
gain a second driver that has different requirements.
v3:
* include discussion summary
v2:
* add 'ret != 0' warning case for self-refresh
* describe failing test case and relation to drm/rockchip patch better
Cc: <stable@vger.kernel.org> # dependency for "drm/rockchip: vop: Leave
# vblank enabled in self-refresh"
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109171809.v3.1.I3904f697863649eb1be540ecca147a66e42bfad7@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92655fbda5c05950a411eaabc19e025e86e2a291 upstream.
The GETLK pid values have all been negated since commit 9d5b86ac13c5
("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks").
Revert this for local pids, and leave in place negative pids for remote
owners.
Cc: stable@vger.kernel.org
Fixes: 9d5b86ac13c5 ("fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 035641b01e72af4f6c6cf22a4bdb5d7dfc4e8e8e upstream.
Just calling wait_for_device_probe() is not enough to ensure that
asynchronously probed block devices are available (E.G. mmc, usb), so
add a "dm-mod.waitfor=<device1>[,..,<deviceN>]" parameter to get
dm-init to explicitly wait for specific block devices before
initializing the tables with logic similar to the rootwait logic that
was introduced with commit cc1ed7542c8c ("init: wait for
asynchronously scanned block devices").
E.G. with dm-verity on mmc using:
dm-mod.waitfor="PARTLABEL=hash-a,PARTLABEL=root-a"
[ 0.671671] device-mapper: init: waiting for all devices to be available before creating mapped devices
[ 0.671679] device-mapper: init: waiting for device PARTLABEL=hash-a ...
[ 0.710695] mmc0: new HS200 MMC card at address 0001
[ 0.711158] mmcblk0: mmc0:0001 004GA0 3.69 GiB
[ 0.715954] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB
[ 0.722085] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB
[ 0.728093] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (249:0)
[ 0.738274] mmcblk0: p1 p2 p3 p4 p5 p6 p7
[ 0.751282] device-mapper: init: waiting for device PARTLABEL=root-a ...
[ 0.751306] device-mapper: init: all devices available
[ 0.751683] device-mapper: verity: sha256 using implementation "sha256-generic"
[ 0.759344] device-mapper: ioctl: dm-0 (vroot) is ready
[ 0.766540] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e836007089ba8fdf24e636ef2b007651fb4582e6 upstream.
We've found that using raid0 with the 'original' layout and discard
enabled with different disk sizes (such that at least two zones are
created) can result in data corruption. This is due to the fact that
the discard handling in 'raid0_handle_discard()' assumes the 'alternate'
layout. We've seen this corruption using ext4 but other filesystems are
likely susceptible as well.
More specifically, while multiple zones are necessary to create the
corruption, the corruption may not occur with multiple zones if they
layout in such a way the layout matches what the 'alternate' layout
would have produced. Thus, not all raid0 devices with the 'original'
layout, different size disks and discard enabled will encounter this
corruption.
The 3.14 kernel inadvertently changed the raid0 disk layout for different
size disks. Thus, running a pre-3.14 kernel and post-3.14 kernel on the
same raid0 array could corrupt data. This lead to the creation of the
'original' layout (to match the pre-3.14 layout) and the 'alternate' layout
(to match the post 3.14 layout) in the 5.4 kernel time frame and an option
to tell the kernel which layout to use (since it couldn't be autodetected).
However, when the 'original' layout was added back to 5.4 discard support
for the 'original' layout was not added leading this issue.
I've been able to reliably reproduce the corruption with the following
test case:
1. create raid0 array with different size disks using original layout
2. mkfs
3. mount -o discard
4. create lots of files
5. remove 1/2 the files
6. fstrim -a (or just the mount point for the raid0 array)
7. umount
8. fsck -fn /dev/md0 (spews all sorts of corruptions)
Let's fix this by adding proper discard support to the 'original' layout.
The fix 'maps' the 'original' layout disks to the order in which they are
read/written such that we can compare the disks in the same way that the
current 'alternate' layout does. A 'disk_shift' field is added to
'struct strip_zone'. This could be computed on the fly in
raid0_handle_discard() but by adding this field, we save some computation
in the discard path.
Note we could also potentially fix this by re-ordering the disks in the
zones that follow the first one, and then always read/writing them using
the 'alternate' layout. However, that is seen as a more substantial change,
and we are attempting the least invasive fix at this time to remedy the
corruption.
I've verified the change using the reproducer mentioned above. Typically,
the corruption is seen after less than 3 iterations, while the patch has
run 500+ iterations.
Cc: NeilBrown <neilb@suse.de>
Cc: Song Liu <song@kernel.org>
Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230623180523.1901230-1-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d420c9886f5369697047b880221789bf0054e438 upstream.
Add the missing module device table alias to that the driver can be
autoloaded when built as a module.
Cc: stable@vger.kernel.org # 5.14
Fixes: 6b149f3310a4 ("mfd: pm8008: Add driver for QCOM PM8008 PMIC")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230526091646.17318-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb620ae73b70c2f57b9d3e911fc24c024ba2324f upstream.
The irq_raised completion used to detect the end of a test case is
initialized when the test device is probed, but never reinitialized again
before a test case. As a result, the irq_raised completion synchronization
is effective only for the first ioctl test case executed. Any subsequent
call to wait_for_completion() by another ioctl() call will immediately
return, potentially too early, leading to false positive failures.
Fix this by reinitializing the irq_raised completion before starting a new
ioctl() test command.
Link: https://lore.kernel.org/r/20230415023542.77601-16-dlemoal@kernel.org
Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f61b7634a3249d12b9daa36ffbdb9965b6f24c6c upstream.
In pci_endpoint_test_remove(), freeing the IRQs after removing the device
creates a small race window for IRQs to be received with the test device
memory already released, causing the IRQ handler to access invalid memory,
resulting in an oops.
Free the device IRQs before removing the device to avoid this issue.
Link: https://lore.kernel.org/r/20230415023542.77601-15-dlemoal@kernel.org
Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e6689b34a815bd379dfdbe9855d36f395ef056c upstream.
The address translation unit of the rockchip EP controller does not use
the lower 8 bits of a PCIe-space address to map local memory. Thus we
must set the align feature field to 256 to let the user know about this
constraint.
Link: https://lore.kernel.org/r/20230418074700.1083505-12-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8962b2cb39119cbda4fc69a1f83957824f102f81 upstream.
Previously u16 variables were used to access 32-bit registers, this
resulted in not all of the data being read from the registers. Also
the left shift of more than 16-bits would result in moving data out
of the variable. Use u32 variables to access 32-bit registers
Link: https://lore.kernel.org/r/20230418074700.1083505-10-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 166e89d99dd85a856343cca51eee781b793801f2 upstream.
Fix legacy IRQ generation for RK3399 PCIe endpoint core according to
the technical reference manual (TRM). Assert and deassert legacy
interrupt (INTx) through the legacy interrupt control register
("PCIE_CLIENT_LEGACY_INT_CTRL") instead of manually generating a PCIe
message. The generation of the legacy interrupt was tested and validated
with the PCIe endpoint test driver.
Link: https://lore.kernel.org/r/20230418074700.1083505-8-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9dd3c7c4c8c3f7f010d9cdb7c3f42506d93c9527 upstream.
The RK3399 PCIe controller should wait until the PHY PLLs are locked.
Add poll and timeout to wait for PHY PLLs to be locked. If they cannot
be locked generate error message and jump to error handler. Accessing
registers in the PHY clock domain when PLLs are not locked causes hang
The PHY PLLs status is checked through a side channel register.
This is documented in the TRM section 17.5.8.1 "PCIe Initialization
Sequence".
Link: https://lore.kernel.org/r/20230418074700.1083505-5-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f1c42ece18de365c976a060f3c8eb481b038e3a upstream.
Write PCI Device ID (DID) to the correct register. The Device ID was not
updated through the correct register. Device ID was written to a read-only
register and therefore did not work. The Device ID is now set through the
correct register. This is documented in the RK3399 TRM section 17.6.6.1.1
Link: https://lore.kernel.org/r/20230418074700.1083505-3-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f397fd4ac1fa3afcabd8cee030f953ccaed2a364 upstream.
Assert PCI Configuration Enable bit after probe. When this bit is left to
0 in the endpoint mode, the RK3399 PCIe endpoint core will generate
configuration request retry status (CRS) messages back to the root complex.
Assert this bit after probe to allow the RK3399 PCIe endpoint core to reply
to configuration requests from the root complex.
This is documented in section 17.5.8.1.2 of the RK3399 TRM.
Link: https://lore.kernel.org/r/20230418074700.1083505-4-rick.wertenbroek@gmail.com
Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a33d700e8eea76c62120cb3dbf5e01328f18319a upstream.
In the post init sequence of v2.9.0, write access to read only registers
are not disabled after updating the registers. Fix it by disabling the
access after register update.
Link: https://lore.kernel.org/r/20230619150408.8468-2-manivannan.sadhasivam@linaro.org
Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e30fd26f43b89cb6b4e850a86caa2e50dedb454 upstream.
The quirk for Elo i2 introduced in commit 92597f97a40b ("PCI/PM: Avoid
putting Elo i2 PCIe Ports in D3cold") is also needed by EloPOS E2/S2/H2
which uses the same Continental Z2 board.
Change the quirk to match the board instead of system.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215715
Link: https://lore.kernel.org/r/20230614074253.22318-1-linux@zary.sk
Signed-off-by: Ondrej Zary <linux@zary.sk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d50eb4725934fd22f5eeccb401000687c790fd0 upstream.
It was reported that dm-integrity runs out of vmalloc space on 32-bit
architectures. On x86, there is only 128MiB vmalloc space and dm-integrity
consumes it quickly because it has a 64MiB journal and 8MiB recalculate
buffer.
Fix this by reducing the size of the journal to 4MiB and the size of
the recalculate buffer to 1MiB, so that multiple dm-integrity devices
can be created and activated on 32-bit architectures.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d744ae7477190967a3ddc289e2cd4ae59e8b1237 upstream.
Fix the timeout that is used for the initialisation and for the self
test. wait_for_completion_timeout expects a timeout in jiffies, but
RNGC_TIMEOUT is in milliseconds. Call msecs_to_jiffies to do the
conversion.
Cc: stable@vger.kernel.org
Fixes: 1d5449445bd0 ("hwrng: mx-rngc - add a driver for Freescale RNGC")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11509910c599cbd04585ec35a6d5e1a0053d84c1 upstream.
In jfs_dmap.c at line 381, BLKTODMAP is used to get a logical block
number inside dbFree(). db_l2nbperpage, which is the log2 number of
blocks per page, is passed as an argument to BLKTODMAP which uses it
for shifting.
Syzbot reported a shift out-of-bounds crash because db_l2nbperpage is
too big. This happens because the large value is set without any
validation in dbMount() at line 181.
Thus, make sure that db_l2nbperpage is correct while mounting.
Max number of blocks per page = Page size / Min block size
=> log2(Max num_block per page) = log2(Page size / Min block size)
= log2(Page size) - log2(Min block size)
=> Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE
Reported-and-tested-by: syzbot+d2cd27dcf8e04b232eb2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=2a70a453331db32ed491f5cbb07e81bf2d225715
Cc: stable@vger.kernel.org
Suggested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de25d6e9610a8b30cce9bbb19b50615d02ebca02 upstream.
In our fault injection test, we create an ext4 file, migrate it to
non-extent based file, then punch a hole and finally trigger a WARN_ON
in the ext4_da_update_reserve_space():
EXT4-fs warning (device sda): ext4_da_update_reserve_space:369:
ino 14, used 11 with only 10 reserved data blocks
When writing back a non-extent based file, if we enable delalloc, the
number of reserved blocks will be subtracted from the number of blocks
mapped by ext4_ind_map_blocks(), and the extent status tree will be
updated. We update the extent status tree by first removing the old
extent_status and then inserting the new extent_status. If the block range
we remove happens to be in an extent, then we need to allocate another
extent_status with ext4_es_alloc_extent().
use old to remove to add new
|----------|------------|------------|
old extent_status
The problem is that the allocation of a new extent_status failed due to a
fault injection, and __es_shrink() did not get free memory, resulting in
a return of -ENOMEM. Then do_writepages() retries after receiving -ENOMEM,
we map to the same extent again, and the number of reserved blocks is again
subtracted from the number of blocks in that extent. Since the blocks in
the same extent are subtracted twice, we end up triggering WARN_ON at
ext4_da_update_reserve_space() because used > ei->i_reserved_data_blocks.
For non-extent based file, we update the number of reserved blocks after
ext4_ind_map_blocks() is executed, which causes a problem that when we call
ext4_ind_map_blocks() to create a block, it doesn't always create a block,
but we always reduce the number of reserved blocks. So we move the logic
for updating reserved blocks to ext4_ind_map_blocks() to ensure that the
number of reserved blocks is updated only after we do succeed in allocating
some new blocks.
Fixes: 5f634d064c70 ("ext4: Fix quota accounting error with fallocate")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4d13222afd8a64bf11bc7ec68645496ee8b54b9 upstream.
freeze_bdev() can fail due to a lot of reasons, it needs to check its
reason before later process.
Fixes: 783d94854499 ("ext4: add EXT4_IOC_GOINGDOWN ioctl")
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20230606073203.1310389-1-chao@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26fb5290240dc31cae99b8b4dd2af7f46dfcba6b upstream.
Following process makes ext4 load stale buffer heads from last failed
mounting in a new mounting operation:
mount_bdev
ext4_fill_super
| ext4_load_and_init_journal
| ext4_load_journal
| jbd2_journal_load
| load_superblock
| journal_get_superblock
| set_buffer_verified(bh) // buffer head is verified
| jbd2_journal_recover // failed caused by EIO
| goto failed_mount3a // skip 'sb->s_root' initialization
deactivate_locked_super
kill_block_super
generic_shutdown_super
if (sb->s_root)
// false, skip ext4_put_super->invalidate_bdev->
// invalidate_mapping_pages->mapping_evict_folio->
// filemap_release_folio->try_to_free_buffers, which
// cannot drop buffer head.
blkdev_put
blkdev_put_whole
if (atomic_dec_and_test(&bdev->bd_openers))
// false, systemd-udev happens to open the device. Then
// blkdev_flush_mapping->kill_bdev->truncate_inode_pages->
// truncate_inode_folio->truncate_cleanup_folio->
// folio_invalidate->block_invalidate_folio->
// filemap_release_folio->try_to_free_buffers will be skipped,
// dropping buffer head is missed again.
Second mount:
ext4_fill_super
ext4_load_and_init_journal
ext4_load_journal
ext4_get_journal
jbd2_journal_init_inode
journal_init_common
bh = getblk_unmovable
bh = __find_get_block // Found stale bh in last failed mounting
journal->j_sb_buffer = bh
jbd2_journal_load
load_superblock
journal_get_superblock
if (buffer_verified(bh))
// true, skip journal->j_format_version = 2, value is 0
jbd2_journal_recover
do_one_pass
next_log_block += count_tags(journal, bh)
// According to journal_tag_bytes(), 'tag_bytes' calculating is
// affected by jbd2_has_feature_csum3(), jbd2_has_feature_csum3()
// returns false because 'j->j_format_version >= 2' is not true,
// then we get wrong next_log_block. The do_one_pass may exit
// early whenoccuring non JBD2_MAGIC_NUMBER in 'next_log_block'.
The filesystem is corrupted here, journal is partially replayed, and
new journal sequence number actually is already used by last mounting.
The invalidate_bdev() can drop all buffer heads even racing with bare
reading block device(eg. systemd-udev), so we can fix it by invalidating
bdev in error handling path in __ext4_fill_super().
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217171
Fixes: 25ed6e8a54df ("jbd2: enable journal clients to enable v2 checksumming")
Cc: stable@vger.kernel.org # v3.5
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230315013128.3911115-2-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65fee014dc41a774bcd94896f3fb380bc39d8dda upstream.
Commit 7db5e9e9e5e6c10d7d ("MIPS: loongson64: fix FTLB configuration")
move decode_configs() from the beginning of cpu_probe_loongson() to the
end in order to fix FTLB configuration. However, it breaks the CPUCFG
decoding because decode_configs() use "c->options = xxxx" rather than
"c->options |= xxxx", all information get from CPUCFG by decode_cpucfg()
is lost.
This causes error when creating a KVM guest on Loongson-3A4000:
Exception Code: 4 not handled @ PC: 0000000087ad5981, inst: 0xcb7a1898 BadVaddr: 0x0 Status: 0x0
Fix this by moving the c->cputype setting to the beginning and moving
decode_configs() after that.
Fixes: 7db5e9e9e5e6c10d7d ("MIPS: loongson64: fix FTLB configuration")
Cc: stable@vger.kernel.org
Cc: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 001b8ccd0650727e54ec16ef72bf1b8eeab7168e upstream.
In compact 4B, two adjacent lclusters are packed together as a unit to
form on-disk indexes for effective random access, as below:
(amortized = 4, vcnt = 2)
_____________________________________________
|___@_____ encoded bits __________|_ blkaddr _|
0 . amortized * vcnt = 8
. .
. . amortized * vcnt - 4 = 4
. .
.____________________________.
|_type (2 bits)_|_clusterofs_|
Therefore, encoded bits for each pack are 32 bits (4 bytes). IOWs,
since each lcluster can get 16 bits for its type and clusterofs, the
maximum supported lclustersize for compact 4B format is 16k (14 bits).
Fix this to enable compact 4B format for 16k lclusters (blocks), which
is tested on an arm64 server with 16k page size.
Fixes: 152a333a5895 ("staging: erofs: add compacted compression indexes support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230601112341.56960-1-hsiangkao@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9d216fcef4298de76519e2baeed69ba482467bd upstream
Arm Neoverse-N2 and the Cortex-A710 cores are affected
by a CPU erratum where the TRBE will overwrite the trace buffer
in FILL mode. The TRBE doesn't stop (as expected in FILL mode)
when it reaches the limit and wraps to the base to continue
writing upto 3 cache lines. This will overwrite any trace that
was written previously.
Add the Neoverse-N2 erratum(#2139208) and Cortex-A710 erratum
(#2119858) to the detection logic.
This will be used by the TRBE driver in later patches to work
around the issue. The detection has been kept with the core
arm64 errata framework list to make sure :
- We don't duplicate the framework in TRBE driver
- The errata detection is advertised like the rest
of the CPU errata.
Note that the Kconfig entries are not fully active until the
TRBE driver implements the work around.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
cc: Leo Yan <leo.yan@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20211019163153.3692640-3-suzuki.poulose@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
