IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 9020ef659885f2622cfb386cc229b6d618362895 upstream.
IIO triggers are software IRQ chips that split an incoming IRQ into
separate IRQs routed to all devices using the trigger.
When all consumers are done then a trigger callback reenable() is
called. There are a few circumstances under which this can happen
in atomic context.
1) A single user of the trigger that calls the iio_trigger_done()
function from interrupt context.
2) A race between disconnecting the last device from a trigger and
the trigger itself sucessfully being disabled.
To avoid a resulting scheduling whilst atomic, close this second corner
by using schedule_work() to ensure the reenable is not done in atomic
context.
Note that drivers must be careful to manage the interaction of
set_state() and reenable() callbacks to ensure appropriate reference
counting if they are relying on the same hardware controls.
Deliberately taking this the slow path rather than via a fixes tree
because the error has hard to hit and I would like it to soak for a while
before hitting a release kernel.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211017172209.112387-1-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9791a94384af07592d29504004d2255dbaf8663 upstream.
Unfortuanately a non standards compliant ACPI ID is known to be
in the wild on some AAEON boards.
Partly revert the removal of these IDs so that ADC081C will again
work + add a comment to that affect for future reference.
Whilst here use generic firmware properties rather than the ACPI
specific handling previously found in this driver.
Reported-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw>
Fixes: c458b7ca3fd0 ("iio:adc:ti-adc081c: Drop ACPI ids that seem very unlikely to be official.")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Kunyang Fan <Kunyang_Fan@aaeon.com.tw> #UP-extremei11
Link: https://lore.kernel.org/r/20211205172728.2826512-1-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b0b80ac103b2a40c72a47c301745fd1f4ef4697 upstream.
Don't blindly copy status value received from the firmware
into internal client status field,
It may be positive and ERR_PTR(ret) will translate it
into an invalid address and the caller will crash.
Put the error code into the client status on failure.
Fixes: 369aea845951 ("mei: implement client dma setup.")
Cc: <stable@vger.kernel.org> # v5.11+
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: : Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20211228082047.378115-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ced4913efb0acc844ed65cc01d091a85d83a2082 upstream.
In case device registration fails during probe, the driver state and
the embedded platform device structure needs to be freed using
platform_device_put() to properly free all resources (e.g. the device
name).
Fixes: 0a0b7a5f7a04 ("can: add driver for Softing card")
Link: https://lore.kernel.org/all/20211222104843.6105-1-johan@kernel.org
Cc: stable@vger.kernel.org # 2.6.38
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 713bdfa10b5957053811470d298def9537d9ff13 upstream.
The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.
Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.
If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 865463fc03ed (media: cec-pin: add error injection support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6aa6e70cdb5b863a57bad61310bf89b6617a5d2d upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)")
Cc: stable@vger.kernel.org # 3.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b82bf9b9dc305d7d3d93eab106d70dbf2171b43e upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Cc: stable@vger.kernel.org # 2.6.18
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2adc965c8bfa224e11ecccf9c92fd458c4236428 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f7b77ebe6d2f49c7747b2d619586d1aa33f9ea91 upstream.
This fixes a problem where closing the tuner would leave it in a state
where it would not tune to any channel when reopened. This problem was
discovered as part of https://github.com/hselasky/webcamd/issues/16.
Since adap->id is 0 or 1, this bit-shift overflows, which is undefined
behavior. The driver still worked in practice as the overflow would in
most environments result in 0, which rendered the line a no-op. When
running the driver as part of webcamd however, the overflow could lead
to 0xff due to optimizations by the compiler, which would, in the end,
improperly shut down the tuner.
The bug is a regression introduced in the commit referenced below. The
present patch causes identical behavior to before that commit for
adap->id equal to 0 or 1. The driver does not contain support for
dib0700 devices with more adapters, assuming such even exist.
Tests have been performed with the Xbox One Digital TV Tuner on amd64.
Not all dib0700 devices are expected to be affected by the regression;
this code path is only taken by those with incorrect endpoint numbers.
Link: https://lore.kernel.org/linux-media/1d2fc36d94ced6f67c7cc21dcc469d5e5bdd8201.1632689033.git.mchehab+huawei@kernel.org
Cc: stable@vger.kernel.org
Fixes: 7757ddda6f4f ("[media] DiB0700: add function to change I2C-speed")
Signed-off-by: Michael Kuron <michael.kuron@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f71d272ad4e354097020a4e6b1dc6e4b59feb50f upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Use the common control-message timeout define for the five-second
timeouts.
Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.")
Cc: stable@vger.kernel.org # 2.6.27
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10729be03327f53258cb196362015ad5c6eabe02 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support")
Cc: stable@vger.kernel.org # 2.6.17
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9b7e8df3aa9b8c10708aab60e72e79ac08237e4 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: a6c2ba283565 ("[PATCH] v4l: 716: support for em28xx board family")
Cc: stable@vger.kernel.org # 2.6.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16394e998cbb050730536bdf7e89f5a70efbd974 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 66e89522aff7 ("V4L/DVB: IR: add mceusb IR receiver driver")
Cc: stable@vger.kernel.org # 2.6.36
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd1798a387825cc4a51282f5a611ad05bb1ad75f upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Note that the driver was multiplying some of the timeout values with HZ
twice resulting in 3000-second timeouts with HZ=1000.
Also note that two of the timeout defines are currently unused.
Fixes: 2154be651b90 ("[media] redrat3: new rc-core IR transceiver device driver")
Cc: stable@vger.kernel.org # 3.0
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd9d9377ed235b294a492a094e1666178a5e78fd upstream.
If V4L2_CAP_READWRITE is not set, then readbuffers must be set to 0,
otherwise v4l2-compliance will complain.
A note on the Fixes tag below: this patch does not really fix that commit,
but it can be applied from that commit onwards. For older code there is no
guarantee that device_caps is set, so even though this patch would apply,
it will not work reliably.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 049e684f2de9 (media: v4l2-dev: fix WARN_ON(!vdev->device_caps))
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbe0b3af73bf72fad197756f026084404e2bcdc7 upstream.
If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.
Fix this by disabling only clocks and regulators that were enabled
previously.
Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9e6107616bb8108aa4fc22584a05e69761a91f7 upstream.
The cec_devnode struct has a lock meant to serialize access
to the fields of this struct. This lock is taken during
device node (un)registration and when opening or releasing a
filehandle to the device node. When the last open filehandle
is closed the cec adapter might be disabled by calling the
adap_enable driver callback with the devnode.lock held.
However, if during that callback a message or event arrives
then the driver will call one of the cec_queue_event()
variants in cec-adap.c, and those will take the same devnode.lock
to walk the open filehandle list.
This obviously causes a deadlock.
This is quite easy to reproduce with the cec-gpio driver since that
uses the cec-pin framework which generated lots of events and uses
a kernel thread for the processing, so when adap_enable is called
the thread is still running and can generate events.
But I suspect that it might also happen with other drivers if an
interrupt arrives signaling e.g. a received message before adap_enable
had a chance to disable the interrupts.
This patch adds a new mutex to serialize access to the fhs list.
When adap_enable() is called the devnode.lock mutex is held, but
not devnode.lock_fhs. The event functions in cec-adap.c will now
use devnode.lock_fhs instead of devnode.lock, ensuring that it is
safe to call those functions from the adap_enable callback.
This specific issue only happens if the last open filehandle is closed
and the physical address is invalid. This is not something that
happens during normal operation, but it does happen when monitoring
CEC traffic (e.g. cec-ctl --monitor) with an unconfigured CEC adapter.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41dbda16a0902798e732abc6599de256b9dc3b27 upstream.
Whenever new parameter is added to smb configuration, It is possible
to break the execution of the IPC daemon by mismatch size of
request/response. This patch tries to reserve space in ipc request/response
in advance to prevent that.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b589f5db6d4af8f14d70e31e1276b4c017668a26 upstream.
If the client ignores the CreditResponse received from the server and
continues to send the request, ksmbd limits the requests if it exceeds
smb2 max credits.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 914d7e5709ac59ded70bea7956d408fe2acd7c3c upstream.
Moves the credit charge deduction from total_credits under the processing
a request. When repeating smb2 lock request and other command request,
there will be a problem that ->total_credits does not decrease.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 004443b3f6d722b455cf963ed7c3edd7f4772405 upstream.
Add smb2 max credits parameter to adjust maximum credits value to limit
number of outstanding requests.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac090d9c90b087d6fb714e54b2a6dd1e6c373ed6 upstream.
MS-SMB2 describe session sign like the following.
Session.SigningRequired MUST be set to TRUE under the following conditions:
- If the SMB2_NEGOTIATE_SIGNING_REQUIRED bit is set in the SecurityMode
field of the client request.
- If the SMB2_SESSION_FLAG_IS_GUEST bit is not set in the SessionFlags
field and Session.IsAnonymous is FALSE and either Connection.ShouldSign
or global RequireMessageSigning is TRUE.
When trying guest account connection using nautilus, The login failure
happened on session setup. ksmbd does not allow this connection
when the user is a guest and the connection sign is set. Just do not set
session sign instead of error response as described in the specification.
And this change improves the guest connection in Nautilus.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b207602fb04537cb21ac38fabd7577eca2fa05ae upstream.
The "ksmbd_socket" variable is not initialized on this error path.
Cc: stable@vger.kernel.org
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 020a45aff1190c32b1087cd75b57fbf6bff46ea6 upstream.
Existing genphy_loopback() is not applicable for Marvell PHY. Besides
configuring bit-6 and bit-13 in Page 0 Register 0 (Copper Control
Register), it is also required to configure same bits in Page 2
Register 21 (MAC Specific Control Register 2) according to speed of
the loopback is operating.
Tested working on Marvell88E1510 PHY for all speeds (1000/100/10Mbps).
FIXME: Based on trial and error test, it seem 1G need to have delay between
soft reset and loopback enablement.
Fixes: 014068dcb5b1 ("net: phy: genphy_loopback: add link speed configuration")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 454f47ff464325223129b9b5b8d0b61946ec704d upstream.
Reading from the CMOS involves writing to the index register and then
reading from the data register. Therefore access to the CMOS has to be
serialized with rtc_lock. This invocation of CMOS_READ was not
serialized, which could cause trouble when other code is accessing CMOS
at the same time.
Use spin_lock_irq() like the rest of the function.
Nothing in kernel modifies the RTC_DM_BINARY bit, so there could be a
separate pair of spin_lock_irq() / spin_unlock_irq() before doing the
math.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210200131.153887-2-mat.jonczyk@o2.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de0244ae40ae91145faaf164a4252347607c3711 upstream.
Ammar Faizi reported that our exit code handling is wrong. We truncate
it to the lowest 8 bits but the syscall itself is expected to take a
regular 32-bit signed integer, not an unsigned char. It's the kernel
that later truncates it to the lowest 8 bits. The difference is visible
in strace, where the program below used to show exit(255) instead of
exit(-1):
int main(void)
{
return -1;
}
This patch applies the fix to all archs. x86_64, i386, arm64, armv7 and
mips were all tested and confirmed to work fine now. Risc-v was not
tested but the change is trivial and exactly the same as for other archs.
Reported-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebbe0d8a449d183fa43b42d84fcb248e25303985 upstream.
After re-checking in the spec and comparing stack offsets with glibc,
The last pushed argument must be 16-byte aligned (i.e. aligned before the
call) so that in the callee esp+4 is multiple of 16, so the principle is
the 32-bit equivalent to what Ammar fixed for x86_64. It's possible that
32-bit code using SSE2 or MMX could have been affected. In addition the
frame pointer ought to be zero at the deepest level.
Link: https://gitlab.com/x86-psABIs/i386-ABI/-/wikis/Intel386-psABI
Cc: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d480a26bdf872529919e7c30e17f79d0d7b8c4da upstream.
x86 AES-NI routines can deal with unaligned data. Crypto context
(key, iv etc.) have to be aligned but we take care of that separately
by copying it onto the stack. We were feeding unaligned data into
crypto routines up until commit 83c83e658863 ("crypto: aesni -
refactor scatterlist processing") switched to use the full
skcipher API which uses cra_alignmask to decide data alignment.
This fixes 21% performance regression in kTLS.
Tested by booting with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
(and running thru various kTLS packets).
CC: stable@vger.kernel.org # 5.15+
Fixes: 83c83e658863 ("crypto: aesni - refactor scatterlist processing")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 937ed91c712273131de6d2a02caafd3ee84e0c72 upstream.
Before this patch, the `_start` function looks like this:
```
0000000000001170 <_start>:
1170: pop %rdi
1171: mov %rsp,%rsi
1174: lea 0x8(%rsi,%rdi,8),%rdx
1179: and $0xfffffffffffffff0,%rsp
117d: sub $0x8,%rsp
1181: call 1000 <main>
1186: movzbq %al,%rdi
118a: mov $0x3c,%rax
1191: syscall
1193: hlt
1194: data16 cs nopw 0x0(%rax,%rax,1)
119f: nop
```
Note the "and" to %rsp with $-16, it makes the %rsp be 16-byte aligned,
but then there is a "sub" with $0x8 which makes the %rsp no longer
16-byte aligned, then it calls main. That's the bug!
What actually the x86-64 System V ABI mandates is that right before the
"call", the %rsp must be 16-byte aligned, not after the "call". So the
"sub" with $0x8 here breaks the alignment. Remove it.
An example where this rule matters is when the callee needs to align
its stack at 16-byte for aligned move instruction, like `movdqa` and
`movaps`. If the callee can't align its stack properly, it will result
in segmentation fault.
x86-64 System V ABI also mandates the deepest stack frame should be
zero. Just to be safe, let's zero the %rbp on startup as the content
of %rbp may be unspecified when the program starts. Now it looks like
this:
```
0000000000001170 <_start>:
1170: pop %rdi
1171: mov %rsp,%rsi
1174: lea 0x8(%rsi,%rdi,8),%rdx
1179: xor %ebp,%ebp # zero the %rbp
117b: and $0xfffffffffffffff0,%rsp # align the %rsp
117f: call 1000 <main>
1184: movzbq %al,%rdi
1188: mov $0x3c,%rax
118f: syscall
1191: hlt
1192: data16 cs nopw 0x0(%rax,%rax,1)
119d: nopl (%rax)
```
Cc: Bedirhan KURT <windowz414@gnuweeb.org>
Cc: Louvian Lyndal <louvianlyndal@gmail.com>
Reported-by: Peter Cordes <peter@cordes.ca>
Signed-off-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
[wt: I did this on purpose due to a misunderstanding of the spec, other
archs will thus have to be rechecked, particularly i386]
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c494ca4d3a535f9ca11ad6af1813983c1c6cbdd upstream.
"Stolen memory" is memory set aside for use by an Intel integrated GPU.
The intel_graphics_quirks() early quirk reserves this memory when it is
called for a GPU that appears in the intel_early_ids[] table of integrated
GPUs.
Previously intel_graphics_quirks() was marked as QFLAG_APPLY_ONCE, so it
was called only for the first Intel GPU found. If a discrete GPU happened
to be enumerated first, intel_graphics_quirks() was called for it but not
for any integrated GPU found later. Therefore, stolen memory for such an
integrated GPU was never reserved.
For example, this problem occurs in this Alderlake-P (integrated) + DG2
(discrete) topology where the DG2 is found first, but stolen memory is
associated with the integrated GPU:
- 00:01.0 Bridge
`- 03:00.0 DG2 discrete GPU
- 00:02.0 Integrated GPU (with stolen memory)
Remove the QFLAG_APPLY_ONCE flag and call intel_graphics_quirks() for every
Intel GPU. Reserve stolen memory for the first GPU that appears in
intel_early_ids[].
[bhelgaas: commit log, add code comment, squash in
https://lore.kernel.org/r/20220118190558.2ququ4vdfjuahicm@ldmartin-desk2]
Link: https://lore.kernel.org/r/20220114002843.2083382-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0fd4b1bf995172b9efcee23600d4f69571c321c upstream.
Currently, if 64BIT and !XIP_KERNEL, the phys_ram_base is always 0,
no matter the real start of dram reported by memblock is.
Fixes: 6d7f91d914bc ("riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e105f1d0037d677dff3c697d22f9551e6c39af8 upstream.
raw_smp_processor_id() doesn't return the hart id as stated in
arch/riscv/include/asm/smp.h, use smp_processor_id() instead
to get the cpu id, and cpuid_to_hartid_map() to pass the hart id
to the next kernel. This fixes kexec on HiFive Unleashed/Unmatched
where cpu ids and hart ids don't match (on qemu-virt they match).
Fixes: fba8a8674f68 ("RISC-V: Add kexec support")
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a11c07f032a0e9a562a32ece73af96b0e754c4b3 upstream.
On kdump instead of using an intermediate step to relocate the kernel,
that lives in a "control buffer" outside the current kernel's mapping,
we jump to the crash kernel directly by calling riscv_kexec_norelocate().
The current implementation uses va_pa_offset while switching to physical
addressing, however since we moved the kernel outside the linear mapping
this won't work anymore since riscv_kexec_norelocate() is part of the
kernel mapping and we should use kernel_map.va_kernel_pa_offset, and also
take XIP kernel into account.
We don't really need to use va_pa_offset on riscv_kexec_norelocate, we
can just set STVEC to the physical address of the new kernel instead and
let the hart jump to the new kernel on the next instruction after setting
SATP to zero. This fixes kdump and is also simpler/cleaner.
I tested this on the latest qemu and HiFive Unmatched and works as
expected.
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit decf89f86ecd3c3c3de81c562010d5797bea3de1 upstream.
When allocating crash kernel region without explicitly specifying its
base address/size, memblock_phys_alloc_range will attempt to allocate
memory top to bottom (memblock.bottom_up is false), so the crash
kernel region will end up in highmem on 64bit systems. This way
swiotlb can't work on the crash kernel, since there won't be any
32bit addressible memory available for the bounce buffers.
Try to allocate 32bit addressible memory if available, for the
crash kernel by restricting the top search address to be less
than SZ_4G. If that fails fallback to the previous behavior.
I tested this on HiFive Unmatched where the pci-e controller needs
swiotlb to work, with this patch it's possible to access the pci-e
controller on crash kernel and mount the rootfs from the nvme.
Signed-off-by: Nick Kossifidis <mick@ics.forth.gr>
Fixes: e53d28180d4d ("RISC-V: Add kdump support")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 869c70609248102f3a2e95a39b6233ff6ea2c932 upstream.
Use what is currently the SMP=y version of riscv_cpuid_to_hartid_mask()
for both SMP=y and SMP=n to fix a build failure with KVM=m and SMP=n due
to boot_cpu_hartid not being exported. This also fixes a second bug
where the SMP=n version assumes the sole CPU in the system is in the
incoming mask, which may not hold true in kvm_riscv_vcpu_sbi_ecall() if
the KVM guest VM has multiple vCPUs (on a SMP=n system).
Fixes: 1ef46c231df4 ("RISC-V: Implement new SBI v0.2 extensions")
Reported-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db1503d355a79d1d4255a9996f20e72848b74a56 upstream.
CONFIG_MAXPHYSMEM_* are actually never used, even the nommu defconfigs
selecting the MAXPHYSMEM_2GB had no effects on PAGE_OFFSET since it was
preempted by !MMU case right before.
In addition, the move of the kernel mapping at the end of the address
space broke the use of MAXPHYSMEM_2G with MMU since it defines PAGE_OFFSET
at the same address as the kernel mapping.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping")
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Conor Dooley <Conor.Dooley@microchip.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0171480007d64f663aae9226303f1b1e4621229e upstream.
The ECC engine on the JZ4740 SoC requires the ECC data to be read before
the page; using the default page reading function does not work. Indeed,
the old JZ4740 NAND driver (removed in 5.4) did use the 'OOB first' flag
that existed back then.
Use the newly created nand_read_page_hwecc_oob_first() to address this
issue.
This issue was not found when the new ingenic-nand driver was developed,
most likely because the Device Tree used had the nand-ecc-mode set to
"hw_oob_first", which seems to not be supported anymore.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-5-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8466f73010faf71effb21228ae1cbf577dab130 upstream.
Move the function nand_read_page_hwecc_oob_first() (previously
nand_davinci_read_page_hwecc_oob_first()) to nand_base.c, and export it
as a GPL symbol, so that it can be used by more modules.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-4-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0697f8441faad552fbeb02d74454b5e7bcc956a2 upstream.
The original comment that describes the function
nand_davinci_read_page_hwecc_oob_first() is very obscure and it is hard
to understand what it is for.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-3-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c9d709965385de5a99f84b14bd5860e1541729e upstream.
The function nand_davinci_read_page_hwecc_oob_first() first reads the
OOB data, extracts the ECC information, programs the ECC hardware before
reading the actual data in a loop.
Right after the OOB data was read, it called nand_read_page_op() to
reset the read cursor to the beginning of the page. This caused the
first page to be read twice: in that call, and later in the loop.
Address that issue by changing the call to nand_read_page_op() to
nand_change_read_column_op(), which will only reset the read cursor.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-2-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71e89591502d737c10db2bd4d8fcfaa352552afb upstream.
The function nand_davinci_read_page_hwecc_oob_first() does read the ECC
data from the OOB area. Therefore it does not need to calculate the ECC
as it is already available.
Cc: <stable@vger.kernel.org> # v5.2
Fixes: a0ac778eb82c ("mtd: rawnand: ingenic: Add support for the JZ4740")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211016132228.40254-1-paul@crapouillou.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2966daf7d253d9904b337b040dd7a43472858b8a upstream.
Not the child partition should be removed from the partition list
but the partition itself. Otherwise the partition list gets broken
and any subsequent remove operations leads to a kernel panic.
Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: Andreas Oetken <andreas.oetken@siemens-energy.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102172604.2921065-1-andreas.oetken@siemens-energy.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa1baa0e6c1aa4872e481dce4fc7fd6f3dd8496b upstream.
There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f53d4c109a666bf1a4883b45d546fba079258717 upstream.
gpmi_io clock needs to be gated off when changing the parent/dividers of
enfc_clk_root (i.MX6Q/i.MX6UL) respectively qspi2_clk_root (i.MX6SX).
Otherwise this rate change can lead to an unresponsive GPMI core which
results in DMA timeouts and failed driver probe:
[ 4.072318] gpmi-nand 112000.gpmi-nand: DMA timeout, last DMA
...
[ 4.370355] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -110
...
[ 4.375988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[ 4.381524] gpmi-nand 112000.gpmi-nand: Error in ECC-based read: -22
[ 4.387988] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
[ 4.393535] gpmi-nand 112000.gpmi-nand: Chip: 0, Error -22
...
Other than stated in i.MX 6 erratum ERR007117, it should be sufficient
to gate only gpmi_io because all other bch/nand clocks are derived from
different clock roots.
The i.MX6 reference manuals state that changing clock muxers can cause
glitches but are silent about changing dividers. But tests showed that
these glitches can definitely happen on i.MX6ULL. For i.MX7D/8MM in turn,
the manual guarantees that no glitches can happen when changing
dividers.
Co-developed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-2-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dded08927ca3c31a5c37f8e7f95fe98770475dd4 upstream.
Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer
(which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after
a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM.
KASAN report:
BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0
Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899
CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
? nfc_alloc_send_skb+0x2d/0xc0
__kasan_report.cold+0x117/0x11c
? mark_lock+0x480/0x4f0
? nfc_alloc_send_skb+0x2d/0xc0
kasan_report+0x38/0x50
nfc_alloc_send_skb+0x2d/0xc0
nfc_llcp_send_ui_frame+0x18c/0x2a0
? nfc_llcp_send_i_frame+0x230/0x230
? __local_bh_enable_ip+0x86/0xe0
? llcp_sock_connect+0x470/0x470
? llcp_sock_connect+0x470/0x470
sock_sendmsg+0x8e/0xa0
____sys_sendmsg+0x253/0x3f0
...
The issue was visible only with multiple simultaneous calls to bind() and
sendmsg(), which resulted in most of the bind() calls to fail. The
bind() was failing on checking if there is available WKS/SDP/SAP
(respective bit in 'struct nfc_llcp_local' fields). When there was no
available WKS/SDP/SAP, the bind returned error but the sendmsg() to such
socket was able to trigger mentioned NULL pointer dereference of
nfc_llcp_sock->dev.
The code looks simply racy and currently it protects several paths
against race with checks for (!nfc_llcp_sock->local) which is NULL-ified
in error paths of bind(). The llcp_sock_sendmsg() did not have such
check but called function nfc_llcp_send_ui_frame() had, although not
protected with lock_sock().
Therefore the race could look like (same socket is used all the time):
CPU0 CPU1
==== ====
llcp_sock_bind()
- lock_sock()
- success
- release_sock()
- return 0
llcp_sock_sendmsg()
- lock_sock()
- release_sock()
llcp_sock_bind(), same socket
- lock_sock()
- error
- nfc_llcp_send_ui_frame()
- if (!llcp_sock->local)
- llcp_sock->local = NULL
- nfc_put_device(dev)
- dereference llcp_sock->dev
- release_sock()
- return -ERRNO
The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the
lock, which is racy and ineffective check. Instead, its caller
llcp_sock_sendmsg(), should perform the check inside lock_sock().
Reported-and-tested-by: syzbot+7f23bcddf626e0593a39@syzkaller.appspotmail.com
Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19bdba5265624ba6b9d9dd936a0c6ccc167cfe80 upstream.
Android OTA failed due to SBI_NEED_FSCK flag when pinning the file. Let's avoid
it since we can do in-place-updates.
Cc: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77900c45ee5cd5da63bd4d818a41dbdf367e81cd upstream.
In fuzzed image, SSA table may indicate that a data block belongs to
invalid node, which node ID is out-of-range (0, 1, 2 or max_nid), in
order to avoid migrating inconsistent data in such corrupted image,
let's do sanity check anyway before data block migration.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9056d6489f5a41cfbb67f719d2c0ce61ead72d9f upstream.
As report by Wenqing Liu in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215231
- Overview
kernel NULL pointer dereference triggered in folio_mark_dirty() when mount and operate on a crafted f2fs image
- Reproduce
tested on kernel 5.16-rc3, 5.15.X under root
1. mkdir mnt
2. mount -t f2fs tmp1.img mnt
3. touch tmp
4. cp tmp mnt
F2FS-fs (loop0): sanity_check_inode: inode (ino=49) extent info [5942, 4294180864, 4] is incorrect, run fsck to fix
F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=31340049, run fsck to fix.
BUG: kernel NULL pointer dereference, address: 0000000000000000
folio_mark_dirty+0x33/0x50
move_data_page+0x2dd/0x460 [f2fs]
do_garbage_collect+0xc18/0x16a0 [f2fs]
f2fs_gc+0x1d3/0xd90 [f2fs]
f2fs_balance_fs+0x13a/0x570 [f2fs]
f2fs_create+0x285/0x840 [f2fs]
path_openat+0xe6d/0x1040
do_filp_open+0xc5/0x140
do_sys_openat2+0x23a/0x310
do_sys_open+0x57/0x80
The root cause is for special file: e.g. character, block, fifo or socket file,
f2fs doesn't assign address space operations pointer array for mapping->a_ops field,
so, in a fuzzed image, SSA table indicates a data block belong to special file, when
f2fs tries to migrate that block, it causes NULL pointer access once move_data_page()
calls a_ops->set_dirty_page().
Cc: stable@vger.kernel.org
Reported-by: Wenqing Liu <wenqingliu0120@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5576c4f24c56722a2d9fb9c447d896e5b312078b upstream.
Some weird devices set the codec SSID vendor ID 0, and
snd_pci_quirk_lookup_id() loop aborts at the point although it should
still try matching with the SSID device ID. This resulted in a
missing quirk for some old Macs.
Fix the loop termination condition to check both subvendor and
subdevice.
Fixes: 73355ddd8775 ("ALSA: hda: Code refactoring snd_hda_pick_fixup()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215495
Link: https://lore.kernel.org/r/20220116082838.19382-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20f3cf5f860f9f267a6a6e5642d3d0525edb1814 upstream.
If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.
This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.
Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: 003f50ab673c (HID: wacom: Update last_slot_field during pre_report phase)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
