IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit d5962fb7d6 upstream.
In 'perf report', entering a recursive function from inside of itself
(either directly of indirectly through some other function) results in
calling symbol__annotate2 multiple() times, and freeing the whole
disassembly when exiting from the innermost instance.
The first issue causes the function's disassembly to be duplicated, and
the latter a heap use-after-free (and crash) when trying to access the
disassembly again.
I reproduced the bug on perf 5.11.22 (Ubuntu 20.04.3 LTS) and 5.16.rc8
with the following testcase (compile with gcc recursive.c -o recursive).
To reproduce:
- perf record ./recursive
- perf report
- enter fibonacci and annotate it
- move the cursor on one of the "callq fibonacci" instructions and press enter
- at this point there will be two copies of the function in the disassembly
- go back by pressing q, and perf will crash
#include <stdio.h>
int fibonacci(int n)
{
if(n <= 2) return 1;
return fibonacci(n-1) + fibonacci(n-2);
}
int main()
{
printf("%d\n", fibonacci(40));
}
This patch addresses the issue by annotating a function and freeing the
associated memory on exit only if no annotation is already present, so
that a recursive function is only annotated on entry.
Signed-off-by: Dario Petrillo <dario.pk1@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20220109234441.325106-1-dario.pk1@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions
with branch instructions, and thus perf annotate highlight such valid
pairs as fused.
When annotated with source, perf uses struct disasm_line to contain
either source or instruction line from objdump output. Usually, a C
statement generates multiple instructions which include such
cmp/test/ALU + branch instruction pairs. But in case of assembly
function, each individual assembly source line generate one
instruction.
The 'perf annotate' instruction fusion logic assumes the previous
disasm_line as the previous instruction line, which is wrong because,
for assembly function, previous disasm_line contains source line. And
thus perf fails to highlight valid fused instruction pairs for assembly
functions.
Fix it by searching backward until we find an instruction line and
consider that disasm_line as fused with current branch instruction.
Before:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ cmp %rcx,0x88(%rsp)
│ je .Lerror_bad_iret <--- Source line
0.14 │ ┌──je b4 <--- Instruction line
│ │movl %ecx, %eax
After:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ ┌──cmp %rcx,0x88(%rsp)
│ │je .Lerror_bad_iret
0.14 │ ├──je b4
│ │movl %ecx, %eax
Reviewed-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https //lore.kernel.org/r/20210911043854.8373-1-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the disasm is empty, 's' should fail. Instead it seemingly works,
hiding the empty lines and causing an assertion error on the next time
annotate is called (from within perf report).
The problem is caused by a buffer overflow, caused by a wrong exit
condition in annotate_browser__find_next_asm_line, which checks
browser->b.top instead of browser->b.entries.
This patch fixes the issue, making annotate_browser__toggle_source
fail if the disasm is empty (nothing happens to the user).
Fixes: 6de249d66d ("perf annotate: Allow 's' on source code lines")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210705161524.72953-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make the output more readable, I think it's better to remove 0's in
the output. Also the dummy event has no event stats so it just wasts
the space. Let's use the --skip-empty option to suppress it.
$ perf report --stat --skip-empty
Aggregated stats:
TOTAL events: 16530
MMAP events: 226
COMM events: 1596
EXIT events: 2
THROTTLE events: 121
UNTHROTTLE events: 117
FORK events: 1595
SAMPLE events: 719
MMAP2 events: 12147
CGROUP events: 2
FINISHED_ROUND events: 2
THREAD_MAP events: 1
CPU_MAP events: 1
TIME_CONV events: 1
cycles stats:
SAMPLE events: 719
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427013717.1651674-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Right now, when Line numbers are displayed, one can't easily find a
source file that the line corresponds to.
When a source line is selected and 'l' is pressed, full source file
location is displayed in perf UI footer line. The hotkey works only for
source code lines.
Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/25a6384f-d862-5dda-4fec-8f0555599c75@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making perf with gcc-9.1.1 generates the following warning:
CC ui/browsers/hists.o
ui/browsers/hists.c: In function 'perf_evsel__hists_browse':
ui/browsers/hists.c:3078:61: error: '%d' directive output may be \
truncated writing between 1 and 11 bytes into a region of size \
between 2 and 12 [-Werror=format-truncation=]
3078 | "Max event group index to sort is %d (index from 0 to %d)",
| ^~
ui/browsers/hists.c:3078:7: note: directive argument in the range [-2147483648, 8]
3078 | "Max event group index to sort is %d (index from 0 to %d)",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:937,
from ui/browsers/hists.c:5:
IOW, the string in line 3078 might be too long for buf[] of 64 bytes.
Fix this by increasing the size of buf[] to 128.
Fixes: dbddf17474 ("perf report/top TUI: Support hotkeys to let user select any event for sorting")
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: stable@vger.kernel.org # v5.7+
Link: http://lore.kernel.org/lkml/20201030235431.534417-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For a while we need to have a dummy event for doing things like
receiving PERF_RECORD_COMM, PERF_RECORD_EXEC, etc for threads being
created and dying while we synthesize the pre-existing ones at tool
start.
This 'dummy' event is needed for keeping track of thread lifetime events
early in the session but are uninteresting otherwise, i.e. no need to
have it in a initial events menu for the non-grouped case, i.e. for:
# perf top -e cycles,instructions
or even for plain:
# perf top
When 'cycles' and that 'dummy' event are in place.
The code to remove that 'dummy' event ended up creating an endless loop
for the grouped case, i.e.:
# perf top -e '{cycles,instructions}'
Fix it.
Fixes: bee9ca1c8a ("perf report TUI: Remove needless 'dummy' event from menu")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up fixes and move perf/core forward, minor conflict as
perf_evlist__add_dummy() lost its 'perf_' prefix as it operates on a
'struct evlist', not on a 'struct perf_evlist', i.e. its tools/perf/
specific, it is not in libperf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing the common case of:
perf record
perf report
And getting just the cycles events.
We now have a 'dummy' event to get perf metadata events that take place
while we synthesize metadata records for pre-existing processes by
traversing procfs, so we always have this extra 'dummy' evsel, but we
don't have to offer it as there will be no samples on it, remove this
distraction.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/20200706115452.GA2772@redhat.com/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As they are 'struct evsel' methods or related routines, not part of
tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In d10ec006dc ("perf hists browser: Allow passing an initial hotkey")
the hist_entry__title() call was cut'n'pasted to a function where the
'title' variable is a pointer, not an array, so the sizeof(title)
continues syntactically valid but ends up reducing the real size of the
buffer where to format the first line in the screen to 8 bytes, which
makes the formatting at the title at each refresh to produce just the
string "Samples ", duh, fix it by passing the size of the buffer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: d10ec006dc ("perf hists browser: Allow passing an initial hotkey")
Link: http://lore.kernel.org/lkml/20200330154314.GB4576@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When performing "perf report --group", it shows the event group information
together. In previous patch, we have supported a new option "--group-sort-idx"
to sort the output by the event at the index n in event group.
It would be nice if we can use a hotkey in browser to select a event
to sort.
For example,
# perf report --group
Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ...
Overhead Command Shared Object Symbol
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce
1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] check_preempt_curr
When user press hotkey '3' (event index, starting from 0), it indicates
to sort output by the forth event in group.
Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ...
Overhead Command Shared Object Symbol
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se
v6:
---
Jiri provided a good improvement to eliminate unneeded refresh.
This improvement is added to v6.
v2:
---
1. Report warning at helpline when index is invalid.
2. Report warning at helpline when it's not group event.
3. Use "case '0' ... '9'" to refine the code
4. Split K_RELOAD implementation to another patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When performing "perf report --group", it shows the event group
information together. By default, the output is sorted by the first
event in group.
It would be nice for user to select any event for sorting. This patch
introduces a new option "--group-sort-idx" to sort the output by the
event at the index n in event group.
For example,
Before:
# perf report --group --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce
1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt
...
After:
# perf report --group --stdio --group-sort-idx 3
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] scheduler_tick
Now the output is sorted by the fourth event in group.
v7:
---
Rebase to latest perf/core, no other change.
v4:
---
1. Update Documentation/perf-report.txt to mention
'--group-sort-idx' support multiple groups with different
amount of events and it should be used on grouped events.
2. Update __hpp__group_sort_idx(), just return when the
idx is out of limit.
3. Return failure on symbol_conf.group_sort_idx && !session->evlist->nr_groups.
So now we don't need to use together with --group.
v3:
---
Refine the code in __hpp__group_sort_idx().
Before:
for (i = 1; i < nr_members; i++) {
if (i == idx) {
ret = field_cmp(fields_a[i], fields_b[i]);
if (ret)
goto out;
}
}
After:
if (idx >= 1 && idx < nr_members) {
ret = field_cmp(fields_a[idx], fields_b[idx]);
if (ret)
goto out;
}
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-2-yao.jin@linux.intel.com
[ Renamed pair_fields_alloc() to hist_entry__new_pair() and combined decl + assignment of vars ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf report on stripped binaries it is currently impossible to do
annotation. The annotation state is all tied to symbols, but there are
either no symbols, or symbols are not covering all the code.
We should support the annotation functionality even without symbols.
This patch fakes a symbol and the symbol name is the string of address.
After that, we just follow current annotation working flow.
For example,
1. perf report
Overhead Command Shared Object Symbol
20.67% div libc-2.27.so [.] __random_r
17.29% div libc-2.27.so [.] __random
10.59% div div [.] 0x0000000000000628
9.25% div div [.] 0x0000000000000612
6.11% div div [.] 0x0000000000000645
2. Select the line of "10.59% div div [.] 0x0000000000000628" and ENTER.
Annotate 0x0000000000000628
Zoom into div thread
Zoom into div DSO (use the 'k' hotkey to zoom directly into the kernel)
Browse map details
Run scripts for samples of symbol [0x0000000000000628]
Run scripts for all samples
Switch to another data file in PWD
Exit
3. Select the "Annotate 0x0000000000000628" and ENTER.
Percent│
│
│
│ Disassembly of section .text:
│
│ 0000000000000628 <.text+0x68>:
│ divsd %xmm4,%xmm0
│ divsd %xmm3,%xmm1
│ movsd (%rsp),%xmm2
│ addsd %xmm1,%xmm0
│ addsd %xmm2,%xmm0
│ movsd %xmm0,(%rsp)
Now we can see the dump of object starting from 0x628.
v5:
---
Remove the hotkey 'a' implementation from this patch. It
will be moved to a separate patch.
v4:
---
1. Support the hotkey 'a'. When we press 'a' on address,
now it supports the annotation.
2. Change the patch title from
"Support interactive annotation of code without symbols" to
"perf report: Support interactive annotation of code without symbols"
v3:
---
Keep just the ANNOTATION_DUMMY_LEN, and remove the
opts->annotate_dummy_len since it's the "maybe in future
we will provide" feature.
v2:
---
Fix a crash issue when annotating an address in "unknown" object.
The steps to reproduce this issue:
perf record -e cycles:u ls
perf report
75.29% ls ld-2.27.so [.] do_lookup_x
23.64% ls ld-2.27.so [.] __GI___tunables_init
1.04% ls [unknown] [k] 0xffffffff85c01210
0.03% ls ld-2.27.so [.] _start
When annotating 0xffffffff85c01210, the crash happens.
v2 adds checking for ms->map in add_annotate_opt(). If the object is
"unknown", ms->map is NULL.
Committer notes:
Renamed new_annotate_sym() to symbol__new_unresolved().
Use PRIx64 to fix this issue in some 32-bit arches:
ui/browsers/hists.c: In function 'symbol__new_unresolved':
ui/browsers/hists.c:2474:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=]
snprintf(name, sizeof(name), "%-#.*lx", BITS_PER_LONG / 4, addr);
~~~~~~^ ~~~~
%-#.*llx
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate --show-nr-samples does not really show number of samples.
The reason is we have two separate variables for the same purpose.
One is in symbol_conf.show_nr_samples and another is
annotation_options.show_nr_samples.
We save command line option in symbol_conf.show_nr_samples but uses
annotation_option.show_nr_samples while rendering tui/stdio2 browser.
Though, we copy symbol_conf.show_nr_samples to
annotation__default_options.show_nr_samples but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().
Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_nr_samples is used by perf report/top as well. So
let's kill annotation_options.show_nr_samples.
On a side note, I've kept annotation_options.show_nr_samples definition
because it's still used by perf-config code. Follow up patch to fix
perf-config for annotate will remove annotation_options.show_nr_samples.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-4-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate --show-total-period does not really show total period.
The reason is we have two separate variables for the same purpose.
One is in symbol_conf.show_total_period and another is
annotation_options.show_total_period.
We save command line option in symbol_conf.show_total_period but uses
annotation_option.show_total_period while rendering tui/stdio2 browser.
Though, we copy symbol_conf.show_total_period to
annotation__default_options.show_total_period but that is not really
effective as we don't use annotation__default_options once we copy
default options to dynamic variable annotate.opts in cmd_annotate().
Instead of all these complication, keep only one variable and use it all
over. symbol_conf.show_total_period is used by perf report/top as well.
So let's kill annotation_options.show_total_period.
On a side note, I've kept annotation_options.show_total_period
definition because it's still used by perf-config code. Follow up patch
to fix perf-config for annotate will remove
annotation_options.show_total_period.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Link: http://lore.kernel.org/lkml/20200213064306.160480-3-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
