IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
commit 0cb4d23ae08c48f6bf3c29a8e5c4a74b8388b960 upstream.
Dan Aloni reports:
> Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c0019b7db1d7ac62c711cda6b357a659d46428fe ]
rtm@csail.mit.edu reports:
> nfsd4_decode_bitmap4() will write beyond bmval[bmlen-1] if the RPC
> directs it to do so. This can cause nfsd4_decode_state_protect4_a()
> to write client-supplied data beyond the end of
> nfsd4_exchange_id.spo_must_allow[] when called by
> nfsd4_decode_exchange_id().
Rewrite the loops so nfsd4_decode_bitmap() cannot iterate beyond
@bmlen.
Reported by: rtm@csail.mit.edu
Fixes: d1c263a031e8 ("NFSD: Replace READ* macros in nfsd4_decode_fattr()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
RFC3530 notes that the 'dircount' field may be zero, in which case the
recommendation is to ignore it, and only enforce the 'maxcount' field.
In RFC5661, this recommendation to ignore a zero valued field becomes a
requirement.
Fixes: aee377644146 ("nfsd4: fix rd_dircount enforcement")
Cc: <stable@vger.kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The section "19) Editor modelines and other cruft" in
Documentation/process/coding-style.rst clearly says, "Do not include any
of these in source files."
I recently receive a patch to explicitly add a new one.
Let's do treewide cleanups, otherwise some people follow the existing code
and attempt to upstream their favoriate editor setups.
It is even nicer if scripts/checkpatch.pl can check it.
If we like to impose coding style in an editor-independent manner, I think
editorconfig (patch [1]) is a saner solution.
[1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/
Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NFSD initializes an encode xdr_stream only after the RPC layer has
already inserted the RPC Reply header. Thus it behaves differently
than xdr_init_encode does, which assumes the passed-in xdr_buf is
entirely devoid of content.
nfs4proc.c has this server-side stream initialization helper, but
it is visible only to the NFSv4 code. Move this helper to a place
that can be accessed by NFSv2 and NFSv3 server XDR functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
While converting the NFSv4 decoder to use xdr_stream-based XDR
processing, I removed the old SAVEMEM() macro. This macro wrapped
a bit of logic that avoided a memory allocation by recognizing when
the decoded item resides in a linear section of the Receive buffer.
In that case, it returned a pointer into that buffer instead of
allocating a bounce buffer.
The bounce buffer is necessary only when xdr_inline_decode() has
placed the decoded item in the xdr_stream's scratch buffer, which
disappears the next time xdr_inline_decode() is called with that
xdr_stream. That happens only if the data item crosses a page
boundary in the receive buffer, an exceedingly rare occurrence.
Allocating a bounce buffer every time results in a minor performance
regression that was introduced by the recent NFSv4 decoder overhaul.
Let's restore the previous behavior. On average, it saves about 1.5
kmalloc() calls per COMPOUND.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If the READ_PLUS operation was truncated due to an error, then ensure we
clear the 'eof' flag.
Fixes: 9f0b5792f07d ("NFSD: Encode a full READ_PLUS reply")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Ensure that we encode the data payload + padding, and that we truncate
the preallocated buffer to the actual read size.
Fixes: 528b84934eb9 ("NFSD: Add READ_PLUS data support")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This reverts commit a85857633b04d57f4524cca0a2bfaf87b2543f9f.
We're still factoring ctime into our change attribute even in the
IS_I_VERSION case. If someone sets the system time backwards, a client
could see the change attribute go backwards. Maybe we can just say
"well, don't do that", but there's some question whether that's good
enough, or whether we need a better guarantee.
Also, the client still isn't actually using the attribute.
While we're still figuring this out, let's just stop returning this
attribute.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It doesn't make sense to carry all these extra fields around. Just
make everything into change attribute from the start.
This is just cleanup, there should be no change in behavior.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
inode_query_iversion() can modify i_version. Depending on the exported
filesystem, that may not be safe. For example, if you're re-exporting
NFS, NFS stores the server's change attribute in i_version and does not
expect it to be modified locally. This has been observed causing
unnecessary cache invalidations.
The way a filesystem indicates that it's OK to call
inode_query_iverson() is by setting SB_I_VERSION.
So, move the I_VERSION check out of encode_change(), where it's used
only in GETATTR responses, to nfsd4_change_attribute(), which is
also called for pre- and post- operation attributes.
(Note we could also pull the NFSEXP_V4ROOT case into
nfsd4_change_attribute() as well. That would actually be a no-op,
since pre/post attrs are only used for metadata-modifying operations,
and V4ROOT exports are read-only. But we might make the change in
the future just for simplicity.)
Reported-by: Daire Byrne <daire@dneg.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that all the NFSv4 decoder functions have been converted to
make direct calls to the xdr helpers, remove the unused C macros.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
And clean-up: Now that we have removed the DECODE_TAIL macro from
nfsd4_decode_compound(), we observe that there's no benefit for
nfsd4_decode_compound() to return nfs_ok or nfserr_bad_xdr only to
have its sole caller convert those values to one or zero,
respectively. Have nfsd4_decode_compound() return 1/0 instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor for clarity.
Also, remove a stale comment. Commit ed94164398c9 ("nfsd: implement
machine credential support for some operations") added support for
SP4_MACH_CRED, so state_protect_a is no longer completely ignored.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A dedicated sessionid4 decoder is introduced that will be used by
other operation decoders in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
