IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 36a31b3a8d9ba1707a23de8d8dc1ceaef4eda695 ]
The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.
As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.
Fixes: 3834a2e92229 ("arm64: dts: qcom: sm8150: Add ufs nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-2-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1351512f29b4348e6b497f6343896c1033d409b4 ]
Many child nodes of QMP PHY are named without following bindings schema
and causing dtbs_check warnings like below.
phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$'
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
Correct them to fix the warnings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
Stable-dep-of: 36a31b3a8d9b ("arm64: dts: qcom: sm8150: fix UFS PHY registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c882c899ead3545102a4d71b5fbe73b9e4bc2657 ]
The function platform_get_irq prints an error message into the kernel
log when the irq isn't found.
Since the interrupt is actually optional and not provided by some SoCs,
use platform_get_irq_optional which does not print an error message.
Fixes: c081f3060fab ("soc: qcom: Add support to register LLCC EDAC driver")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104153041.412020-1-luca.weiss@fairphone.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adf85adc2a7199b41e7a4da083bd17274a3d6969 ]
There is a sparse warning shown below:
drivers/soc/ti/knav_qmss_queue.c:70:12: warning: symbol
'knav_acc_firmwares' was not declared. Should it be static?
Since 'knav_acc_firmwares' is only called within knav_qmss_queue.c,
mark it as static to fix the warning.
Fixes: 96ee19becc3b ("soc: ti: add firmware file name as part of the driver")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20221019153212.72350-1-chenjiahao16@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5d577e3d50713ad11d98dbdaa48bb494346c26d ]
The WLAN regulator uses 'gpios' property instead of 'gpio' to specify
regulator enable GPIO. While the former is also currently handled by
the Linux kernel regulator-fixed driver, the later is the correct one
per DT bindings. Update the DT to use the later.
Fixes: 7dd5cbba42c93 ("ARM: dts: stm32: Enable WiFi on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b835f1b8acef53c8882b25f40f48d7f5982c938 ]
The Avenger96 is populated with STM32MP157A DHCOR SoM, drop the
stm32mp15xc.dtsi which should only be included in DTs of devices
which are populated with STM32MP15xC/F SoC as the stm32mp15xc.dtsi
enables CRYP block not present in the STM32MP15xA/D SoC .
Fixes: 7e76f82acd9e1 ("ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63646fcba5bb4b59a19031c21913f94e46a3d0d4 ]
Adds KCSAN's volatile instrumentation to objtool's uaccess whitelist.
Recent kernel change have shown that this was missing from the uaccess
whitelist (since the first upstreamed version of KCSAN):
mm/gup.o: warning: objtool: fault_in_readable+0x101: call to __tsan_volatile_write1() with UACCESS enabled
Fixes: 75d75b7a4d54 ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff02ac621634e82c0c34d02a79d402ae700cdfd0 ]
MSM8916 was originally using the "qcom,q6v5-pil" compatible for the
MSS remoteproc. Later it was decided to use SoC-specific compatibles
instead, so "qcom,msm8916-mss-pil" is now the preferred compatible.
Commit 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific
compatibles to SCM/MSS") updated the MSM8916 device tree to make use of
the new compatible but still kept the old "qcom,q6v5-pil" as fallback.
This is inconsistent with other SoCs and conflicts with the description
in the binding documentation (which says that only one compatible should
be present). Also, it has no functional advantage since older kernels
could not handle this DT anyway (e.g. "power-domains" in the MSS node is
only supported by kernels that also support "qcom,msm8916-mss-pil").
Make this consistent with other SoCs by using only the
"qcom,msm8916-mss-pil" compatible.
Fixes: 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718140344.1831731-2-stephan.gerhold@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d440d811e6e2f37093e54db55bc27fe66678170 ]
Fix Adreno OPP table according to the msm-3.18. Enable 624 MHz for the
speed bin 3 and 560 MHz for bins 2 and 3.
Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-7-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0154caaa2b748e7414a4ec3c6ee60e8f483b2d4f ]
Adjust MSM8996 cpufreq tables according to tables in msm-3.18. Some of
the frequencies are not supported on speed bins other than 0. Also other
speed bins support intermediate topmost frequencies, not supported on
speed bin 0. Implement all these differencies.
Fixes: 90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-5-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8898c9748a872866f8c2973e719b26bf7c6ab64e ]
Qualcomm MSM8996 Pro is a variant of MSM8996 with higher frequencies
supported both on CPU and GPU. There are other minor hardware
differencies in the CPU and GPU regulators and bus fabrics.
However this results in significant differences between 8996 and 8996
Pro CPU OPP tables. Judging from msm-3.18 there are only few common
frequencies supported by both msm8996 and msm8996pro. Rather than
hacking the tables for msm8996, split msm8996pro support into a separate
file. Later this would allow having additional customizations for the
CBF, CPR, retulators, etc.
[DB: dropped all non-CPU-OPP changes]
Fixes: 90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: Realigned supported-hw to keep compat with current cpufreq driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecec4b20d29c3d6922dafe7d2555254a454272d2 ]
The checks for musb->xceiv and musb->xceiv->set_power duplicate those in
usb_phy_set_power(), so there is no need of them. Moreover, not calling
usb_phy_set_power() results in usb_phy_set_charger_current() not being
called, so current USB config max current is not propagated through USB
charger framework and charger drivers may try to draw more current than
allowed or possible.
Fix that by removing those extra checks and calling usb_phy_set_power()
directly.
Tested on Motorola Droid4 and Nokia N900
Fixes: a9081a008f84 ("usb: phy: Add USB charger support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Link: https://lore.kernel.org/r/1669400475-4762-1-git-send-email-ivo.g.dimitrov.75@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31d929de5a112ee1b977a89c57de74710894bbbf ]
When the name_assign_type attribute was introduced (commit
685343fc3ba6, "net: add name_assign_type netdev attribute"), the
loopback device was explicitly mentioned as one which would make use
of NET_NAME_PREDICTABLE:
The name_assign_type attribute gives hints where the interface name of a
given net-device comes from. These values are currently defined:
...
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way
that is guaranteed to avoid reuse and always be the same for a
given device. Examples include statically created devices like
the loopback device [...]
Switch to that so that reading /sys/class/net/lo/name_assign_type
produces something sensible instead of returning -EINVAL.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a30d3e3491dc562384e9f15b201a8a25b57439f ]
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3405a4beaaa852f3ed2a5eb3b5149932d5c3779b ]
Commit f7d8e387d9ae ("HID: uclogic: Switch to Digitizer usage for
styluses") changed the usage used in UCLogic from "Pen" to "Digitizer".
However, the IS_INPUT_APPLICATION() macro evaluates to false for
HID_DG_DIGITIZER causing issues with the XP-Pen Star G640 tablet.
Add the HID_QUIRK_HIDINPUT_FORCE quirk to bypass the
IS_INPUT_APPLICATION() check.
Reported-by: Torge Matthies <openglfreak@googlemail.com>
Reported-by: Alexander Zhang <alex@alexyzhang.dev>
Tested-by: Alexander Zhang <alex@alexyzhang.dev>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f05f80f217bf52443a2582bca19fd78188333f25 upstream.
The device ID 0xa70e is defined for the USB3 device controller in the CPU
sub-system of Raptor Lake platform. Hence updating the ID accordingly.
Fixes: bad0d1d726ac ("usb: dwc3: pci: Add support for Intel Raptor Lake")
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
Link: https://lore.kernel.org/r/20221125105327.27945-1-shruthi.sanil@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de5dc44370fbd6b46bd7f1a1e00369be54a041c8 upstream.
When a MAC address is not assigned to the VF, that portion of the message
sent to the VF is not set. The memory, however, is allocated from the
stack meaning that information may be leaked to the VM. Initialize the
message buffer to 0 so that no information is passed to the VM in this
case.
Fixes: 6ddbc4cf1f4d ("igb: Indicate failure on vf reset for empty mac address")
Reported-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20221212190031.3983342-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fed70b61ef2c0aed54456db3d485b215f6cc3209 upstream.
ADL-N systems have the same issue as ADL-P, where a large boot firmware
delay is seen if USB ports are left in U3 at shutdown. So apply the
XHCI_RESET_TO_DEFAULT quirk to ADL-N as well.
This patch depends on commit 34cd2db408d5 ("xhci: Add quirk to reset
host back to default state at shutdown").
The issue it fixes is a ~20s boot time delay when booting from S5. It
affects ADL-N devices, and ADL-N support was added starting from v5.16.
Cc: stable@vger.kernel.org
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 188c9c2e0c7f4ae864113f80c40bafb394062271 upstream.
The driver leaves the line speed unchanged in case a requested speed is
not supported. Make sure to handle the case where the current speed is
B0 (hangup) without dividing by zero when determining the clock source.
Fixes: 3aacac02f385 ("USB: serial: f81534: add high baud rate support")
Cc: stable@vger.kernel.org # 4.16
Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a08ca6ebafe615c9028c53fc4c9e6c9b2b1f2888 upstream.
The driver leaves the line speed unchanged in case a requested speed is
not supported. Make sure to handle the case where the current speed is
B0 (hangup) without dividing by zero when determining the clock source.
Fixes: 268ddb5e9b62 ("USB: serial: f81232: add high baud rate support")
Cc: stable@vger.kernel.org # 5.2
Cc: Ji-Ze Hong (Peter Hong) <hpeter@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e88906b169ebcb8046e8f0ad76edd09ab41cfdfe upstream.
The RF sniffers are based on cp210x where the RF frontends
are based on a different USB stack.
RF sniffers can analyze packets meta data including power level
and perform packet injection.
Can be used to perform RF frontend self-test when connected to
a concentrator, ex. arch/arm/boot/dts/imx7d-flex-concentrator.dts
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c92670b16727365699fe4b19ed32013bab2c107 upstream.
Setup function uvc_function_setup permits control transfer
requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE),
data stage handler for OUT transfer uses memcpy to copy req->actual
bytes to uvc_event->data.data array of size 60. This may result
in an overflow of 4 bytes.
Fixes: cdda479f15cd ("USB gadget: video class function driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Link: https://lore.kernel.org/r/20221206141301.51305-1-szymon.heidrich@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f3868f06855c97a4954c99b36f3fc9eb8f60326 upstream.
When extending file within last block it can happen that the extent is
already rounded to the blocksize and thus contains the offset we want to
grow up to. In such case we would mistakenly expand the last extent and
make it one block longer than it should be, exposing unallocated block
in a file and causing data corruption. Fix the problem by properly
detecting this case and bailing out.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ad53f0f71c52871202a7bf096feb2c59db33fc5 upstream.
If rounded block-rounded i_lenExtents matches block rounded i_size,
there are no preallocation extents. Do not bother walking extent linked
list.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfe4c1b25dd6d2f056afc00b7c98bcb3dd0b1fc3 upstream.
When preallocation extent is the first one in the extent block, the
code would corrupt extent tree header instead. Fix the problem and use
udf_delete_aext() for deleting extent to avoid some code duplication.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16d0556568148bdcaa45d077cac9f8f7077cf70a upstream.
When extending file with a hole, we tried to preserve existing
preallocation for the file. However that is not very useful and
complicates code because the previous extent may need to be rounded to
block boundary as well (which we forgot to do thus causing data
corruption for sequence like:
xfs_io -f -c "pwrite 0x75e63 11008" -c "truncate 0x7b24b" \
-c "truncate 0xabaa3" -c "pwrite 0xac70b 22954" \
-c "pwrite 0x93a43 11358" -c "pwrite 0xb8e65 52211" file
with 512-byte block size. Just discard preallocation before extending
file to simplify things and also fix this data corruption.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e6303567ce3ca506e4a2704e4baa86f1d8bde02 upstream.
Prior to the Fixes: commit, the initialization code went through the
same fec_enet_set_coalesce() function as used by ethtool, and that
function correctly checks whether the current variant has support for
irq coalescing.
Now that the initialization code instead calls fec_enet_itr_coal_set()
directly, that call needs to be guarded by a check for the
FEC_QUIRK_HAS_COALESCE bit.
Fixes: df727d4547de (net: fec: don't reset irq coalesce settings to defaults on "ip link up")
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205204604.869853-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f33bcc506050f89433a52a3052054d4ebd37b1c1 upstream.
Currently the check against the max value for the control is being
applied after the value has had the minimum applied and been masked. But
the max value simply indicates the number of volume levels on an SX
control, and as such should just be applied on the raw value.
Fixes: 97eea946b939 ("ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125162348.1288005-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a56ea6147facce4ac1fc38675455f9733d96232b ]
If the prp2 field is not filled in nvme_setup_prp_simple(), the prp2
field is garbage data. According to nvme spec, the prp2 is reserved if
the data transfer does not cross a memory page boundary, so clear it to
zero if it is not used.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 517e6a301f34613bff24a8e35b5455884f2d83d8 ]
Per syzbot it is possible for perf_pending_task() to run after the
event is free()'d. There are two related but distinct cases:
- the task_work was already queued before destroying the event;
- destroying the event itself queues the task_work.
The first cannot be solved using task_work_cancel() since
perf_release() itself might be called from a task_work (____fput),
which means the current->task_works list is already empty and
task_work_cancel() won't be able to find the perf_pending_task()
entry.
The simplest alternative is extending the perf_event lifetime to cover
the task_work.
The second is just silly, queueing a task_work while you know the
event is going away makes no sense and is easily avoided by
re-arranging how the event is marked STATE_DEAD and ensuring it goes
through STATE_OFF on the way down.
Reported-by: syzbot+9228d6098455bb209ec8@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d1bb6cc1a654c8693a85b1d262e610196edec8b ]
The table in the datasheet actually shows the volume values in the wrong
order, with the two -3dB values being reversed. This appears to have
caused the lower of the two values to be used in the driver when the
higher should have been, correct this mixup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125162348.1288005-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df727d4547de568302b0ed15b0d4e8a469bdb456 ]
Currently, when a FEC device is brought up, the irq coalesce settings
are reset to their default values (1000us, 200 frames). That's
unexpected, and breaks for example use of an appropriate .link file to
make systemd-udev apply the desired
settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html),
or any other method that would do a one-time setup during early boot.
Refactor the code so that fec_restart() instead uses
fec_enet_itr_coal_set(), which simply applies the settings that are
stored in the private data, and initialize that private data with the
default values.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a8e3bd25f1e789c8154e11ea24dc3ec5a4c1da0 ]
Microchip USB Analyzer can activate the internal termination resistors
by setting the "termination" option ON, or OFF to to deactivate them.
As I've observed, both with my oscilloscope and captured USB packets
below, you must send "0" to turn it ON, and "1" to turn it OFF.
From the schematics in the user's guide, I can confirm that you must
drive the CAN_RES signal LOW "0" to activate the resistors.
Reverse the argument value of usb_msg.termination to fix this.
These are the two commands sequence, ON then OFF.
> No. Time Source Destination Protocol Length Info
> 1 0.000000 host 1.3.1 USB 46 URB_BULK out
>
> Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80000000000000000000000000000000000a8
>
> No. Time Source Destination Protocol Length Info
> 2 4.372547 host 1.3.1 USB 46 URB_BULK out
>
> Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80100000000000000000000000000000000a9
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26e8f6a75248247982458e8237b98c9fb2ffcf9d ]
bitfield mode in ocr register has only 2 bits not 3, so correct
the OCR_MODE_MASK define.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/all/20221123071636.2407823-1-hs@denx.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 689eb2f1ba46b4b02195ac2a71c55b96d619ebf8 ]
Using page size as max_entries when probing ring buffer map, else the
probe may fail on host with 64KB page size (e.g., an ARM64 host).
After the fix, the output of "bpftool feature" on above host will be
correct.
Before :
eBPF map_type ringbuf is NOT available
eBPF map_type user_ringbuf is NOT available
After :
eBPF map_type ringbuf is available
eBPF map_type user_ringbuf is available
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221116072351.1168938-2-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97eea946b93961fffd29448dcda7398d0d51c4b2 ]
The bounds checks in snd_soc_put_volsw_sx() are only being applied to the
first channel, meaning it is possible to write out of bounds values to the
second channel in stereo controls. Add appropriate checks.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220511134137.169575-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b776c4a4618ec1b5219d494c423dc142f23c4e8f ]
There may be failure when start 1 channel recording after
8 channels recording. The reason is that the CHnF
flags are not cleared successfully by software reset.
This issue is triggerred by the change of clearing
software reset bit.
CHnF flags are write 1 clear bits. Clear them by force
write.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1651925654-32060-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
