IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit ef10d57936ead5e817ef7cea6a87531085e77773 ]
There is no "no-emmc" property, so intention for SD/SDIO only nodes was
to use "no-mmc".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b025b4f5c288e29bbea421613a5b4eacf9261fbb ]
"make dtbs_check":
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: $nodename:0: 'pca9547@77' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: pca9547@77: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@4' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ef3691683d7bfd0a2acf48812e4ffe894f10bfa8 upstream.
To save the vgic LPI pending state with GICv4.1, the VPEs must all be
unmapped from the ITSs so that the sGIC caches can be flushed.
The opposite is done once the state is saved.
This is all done by using the activate/deactivate irqdomain callbacks
directly from the vgic code. Crutially, this is done without holding
the irqdesc lock for the interrupts that represent the VPE. And these
callbacks are changing the state of the irqdesc. What could possibly
go wrong?
If a doorbell fires while we are messing with the irqdesc state,
it will acquire the lock and change the interrupt state concurrently.
Since we don't hole the lock, curruption occurs in on the interrupt
state. Oh well.
While acquiring the lock would fix this (and this was Shanker's
initial approach), this is still a layering violation we could do
without. A better approach is actually to free the VPE interrupt,
do what we have to do, and re-request it.
It is more work, but this usually happens only once in the lifetime
of the VM and we don't really care about this sort of overhead.
Fixes: f66b7b151e00 ("KVM: arm64: GICv4.1: Try to save VLPI state in save_pending_tables")
Reported-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230118022348.4137094-1-sdonthineni@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e25498f8cd43c1b5aa327f373dd094e9a006da7 upstream.
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bd5ab93335bf2c4d22c8db427822ae637ed8dc3 ]
MSM8992 uses the same mutex hardware as MSM8994. This was wrong
from the start, but never presented as an issue until the sfpb
compatible was given different driver data.
Fixes: 6a6d1978f9c0 ("arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support")
Reported-by: Eugene Lepshy <fekz115@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221219131918.446587-1-konrad.dybcio@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5225ba9db112ec4ed67da5e4d8b72e618573955e ]
Early hardware did not support hardware handshaking on the UART, but
final production hardware did. When the hardware was updated the chip
select was changed to facilitate hardware handshaking on UART3. Fix the
ecspi2 pin mux to eliminate a pin conflict with UART3 and allow the
EEPROM to operate again.
Fixes: 4ce01ce36d77 ("arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfd04dd1c4b6c33afc2a934b957d71cf8ddd1539 ]
'regulator-compatible' is not a valid property according to
nxp,pca9450-regulator.yaml and causes the following warning:
DTC_CHK arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dtb
...
pmic@25: regulators:LDO1: Unevaluated properties are not allowed ('regulator-compatible' was unexpected)
Remove the invalid 'regulator-compatible' property.
Cc: Teresa Remmet <t.remmet@phytec.de>
Fixes: 88f7f6bcca37 ("arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 18bba1843fc7f264f58c9345d00827d082f9c558 upstream.
Add the missing #include of asm/assembler.h, which is where the ldr_l
macro is defined.
Fixes: ff7a167961d1b97e ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff7a167961d1b97e0e205f245f806e564d3505e7 upstream.
With the introduction of PRMT in the ACPI subsystem, the EFI rts
workqueue is no longer the only caller of efi_call_virt_pointer() in the
kernel. This means the EFI runtime services lock is no longer sufficient
to manage concurrent calls into firmware, but also that firmware calls
may occur that are not marshalled via the workqueue mechanism, but
originate directly from the caller context.
For added robustness, and to ensure that the runtime services have 8 KiB
of stack space available as per the EFI spec, introduce a spinlock
protected EFI runtime stack of 8 KiB, where the spinlock also ensures
serialization between the EFI rts workqueue (which itself serializes EFI
runtime calls) and other callers of efi_call_virt_pointer().
While at it, use the stack pivot to avoid reloading the shadow call
stack pointer from the ordinary stack, as doing so could produce a
gadget to defeat it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b2c3ccbd0011bb3b51d0fec24cb3a5812b1ec8ea ]
When CONFIG_ARM64_LSE_ATOMICS=y, each use of an LL/SC atomic results in
a fragment of code being generated in a subsection without a clear
association with its caller. A trampoline in the caller branches to the
LL/SC atomic with with a direct branch, and the atomic directly branches
back into its trampoline.
This breaks backtracing, as any PC within the out-of-line fragment will
be symbolized as an offset from the nearest prior symbol (which may not
be the function using the atomic), and since the atomic returns with a
direct branch, the caller's PC may be missing from the backtrace.
For example, with secondary_start_kernel() hacked to contain
atomic_inc(NULL), the resulting exception can be reported as being taken
from cpus_are_stuck_in_kernel():
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004
| CM = 0, WnR = 0
| [0000000000000000] user address but active_mm is swapper
| Internal error: Oops: 96000004 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19.0-11219-geb555cb5b794-dirty #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : cpus_are_stuck_in_kernel+0xa4/0x120
| lr : secondary_start_kernel+0x164/0x170
| sp : ffff80000a4cbe90
| x29: ffff80000a4cbe90 x28: 0000000000000000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
| x20: 0000000000000001 x19: 0000000000000001 x18: 0000000000000008
| x17: 3030383832343030 x16: 3030303030307830 x15: ffff80000a4cbab0
| x14: 0000000000000001 x13: 5d31666130663133 x12: 3478305b20313030
| x11: 3030303030303078 x10: 3020726f73736563 x9 : 726f737365636f72
| x8 : ffff800009ff2ef0 x7 : 0000000000000003 x6 : 0000000000000000
| x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000100
| x2 : 0000000000000000 x1 : ffff0000029bd880 x0 : 0000000000000000
| Call trace:
| cpus_are_stuck_in_kernel+0xa4/0x120
| __secondary_switched+0xb0/0xb4
| Code: 35ffffa3 17fffc6c d53cd040 f9800011 (885f7c01)
| ---[ end trace 0000000000000000 ]---
This is confusing and hinders debugging, and will be problematic for
CONFIG_LIVEPATCH as these cases cannot be unwound reliably.
This is very similar to recent issues with out-of-line exception fixups,
which were removed in commits:
35d67794b8828333 ("arm64: lib: __arch_clear_user(): fold fixups into body")
4012e0e22739eef9 ("arm64: lib: __arch_copy_from_user(): fold fixups into body")
139f9ab73d60cf76 ("arm64: lib: __arch_copy_to_user(): fold fixups into body")
When the trampolines were introduced in commit:
addfc38672c73efd ("arm64: atomics: avoid out-of-line ll/sc atomics")
The rationale was to improve icache performance by grouping the LL/SC
atomics together. This has never been measured, and this theoretical
benefit is outweighed by other factors:
* As the subsections are collapsed into sections at object file
granularity, these are spread out throughout the kernel and can share
cachelines with unrelated code regardless.
* GCC 12.1.0 has been observed to place the trampoline out-of-line in
specialised __ll_sc_*() functions, introducing more branching than was
intended.
* Removing the trampolines has been observed to shrink a defconfig
kernel Image by 64KiB when building with GCC 12.1.0.
This patch removes the LL/SC trampolines, meaning that the LL/SC atomics
will be inlined into their callers (or placed in out-of line functions
using regular BL/RET pairs). When CONFIG_ARM64_LSE_ATOMICS=y, the LL/SC
atomics are always called in an unlikely branch, and will be placed in a
cold portion of the function, so this should have minimal impact to the
hot paths.
Other than the improved backtracing, there should be no functional
change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220817155914.3975112-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045ea ("arm64: cmpxchg_double*: hazard against entire exchange variable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e6082e94aac6d0338883b5953631b662a5a9188 ]
The code for the atomic ops is formatted inconsistently, and while this
is not a functional problem it is rather distracting when working on
them.
Some have ops have consistent indentation, e.g.
| #define ATOMIC_OP_ADD_RETURN(name, mb, cl...) \
| static inline int __lse_atomic_add_return##name(int i, atomic_t *v) \
| { \
| u32 tmp; \
| \
| asm volatile( \
| __LSE_PREAMBLE \
| " ldadd" #mb " %w[i], %w[tmp], %[v]\n" \
| " add %w[i], %w[i], %w[tmp]" \
| : [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \
| : "r" (v) \
| : cl); \
| \
| return i; \
| }
While others have negative indentation for some lines, and/or have
misaligned trailing backslashes, e.g.
| static inline void __lse_atomic_##op(int i, atomic_t *v) \
| { \
| asm volatile( \
| __LSE_PREAMBLE \
| " " #asm_op " %w[i], %[v]\n" \
| : [i] "+r" (i), [v] "+Q" (v->counter) \
| : "r" (v)); \
| }
This patch makes the indentation consistent and also aligns the trailing
backslashes. This makes the code easier to read for those (like myself)
who are easily distracted by these inconsistencies.
This is intended as a cleanup.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211210151410.2782645-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 031af50045ea ("arm64: cmpxchg_double*: hazard against entire exchange variable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bde971a83bbff78561458ded236605a365411b87 upstream.
Kernel build with clang and KCFLAGS=-fprofile-sample-use=<profile> fails with:
error: arch/arm64/kvm/hyp/nvhe/kvm_nvhe.tmp.o: Unexpected SHT_REL
section ".rel.llvm.call-graph-profile"
Starting from 13.0.0 llvm can generate SHT_REL section, see
https://reviews.llvm.org/rGca3bdb57fa1ac98b711a735de048c12b5fdd8086.
gen-hyprel does not support SHT_REL relocation section.
Filter out profile use flags to fix the build with profile optimization.
Signed-off-by: Denis Nikitin <denik@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221014184532.3153551-1-denik@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 406504c7b0405d74d74c15a667cd4c4620c3e7a9 upstream.
A recent development on the EFI front has resulted in guests having
their page tables baked in the firmware binary, and mapped into the
IPA space as part of a read-only memslot. Not only is this legitimate,
but it also results in added security, so thumbs up.
It is possible to take an S1PTW translation fault if the S1 PTs are
unmapped at stage-2. However, KVM unconditionally treats S1PTW as a
write to correctly handle hardware AF/DB updates to the S1 PTs.
Furthermore, KVM injects an exception into the guest for S1PTW writes.
In the aforementioned case this results in the guest taking an abort
it won't recover from, as the S1 PTs mapping the vectors suffer from
the same problem.
So clearly our handling is... wrong.
Instead, switch to a two-pronged approach:
- On S1PTW translation fault, handle the fault as a read
- On S1PTW permission fault, handle the fault as a write
This is of no consequence to SW that *writes* to its PTs (the write
will trigger a non-S1PTW fault), and SW that uses RO PTs will not
use HW-assisted AF/DB anyway, as that'd be wrong.
Only in the case described in c4ad98e4b72c ("KVM: arm64: Assume write
fault on S1PTW permission fault on instruction fetch") do we end-up
with two back-to-back faults (page being evicted and faulted back).
I don't think this is a case worth optimising for.
Fixes: c4ad98e4b72c ("KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch")
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Regression-tested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd49776d8f458bba5499384131eddc0b8bcaf50c upstream.
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_i2c12_default pin configuration used second method - with a
"pinmux" child.
Fixes: 44acee207844 ("arm64: dts: qcom: Add Lenovo Yoga C630")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192039.240486-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9905370560d9c29adc15f4937c5a0c0dac05f0b4 upstream.
The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.
The qup_spi2_default pin configuration uses alreaady the second method
with a "pinmux" child, so configure drive-strength similarly in
"pinconf". Otherwise the PIN drive strength would not be applied.
Fixes: 8d23a0040475 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8d8840c72b3df61b5252052b79020dabec01ab5 upstream.
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes: 5aa0d1becd5b ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d8c1d798a2e5091128c391c6dadcc9be334af3f5 ]
We use is_ttbr0_addr() in noinstr code, but as it's only marked as
inline, it's theoretically possible for the compiler to place it
out-of-line and instrument it, which would be problematic.
Mark is_ttbr0_addr() as __always_inline such that that can safely be
used from noinstr code. For consistency, do the same to is_ttbr1_addr().
Note that while is_ttbr1_addr() calls arch_kasan_reset_tag(), this is a
macro (and its callees are either macros or __always_inline), so there
is not a risk of transient instrumentation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221114144042.3001140-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad2631b5645a1d0ca9bf6fecf71f77e3b0071ee5 ]
The actual clock feeding into the Mali GPU on the MT8183 is from the
clock gate in the MFGCFG block, not CLK_TOP_MFGPLL_CK from the TOPCKGEN
block, which itself is simply a pass-through placeholder for the MFGPLL
in the APMIXEDSYS block.
Fix the hardware description with the correct clock reference.
Fixes: a8168cebf1bc ("arm64: dts: mt8183: Add node for the Mali GPU")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220927101128.44758-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f535cc583759c9c60d4cc9b8d221762e2d75387 ]
Update its unit name to oscillator-26m and remove the unneeded unit
address to fix a unit_address_vs_reg warning.
Fixes: 464c510f60c6 ("arm64: dts: mediatek: add mt6797 support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d4516f53a611b362db7ba7a8889923d469f57e1 ]
The unit address for the pinctrl node is (0x)1000b000 and not
(0x)10005000, which is the syscfg_pctl_a address instead.
This fixes the following warning:
arch/arm64/boot/dts/mediatek/mt2712e.dtsi:264.40-267.4: Warning
(unique_unit_address): /syscfg_pctl_a@10005000: duplicate
unit-address (also used in node /pinctrl@10005000)
Fixes: f0c64340b748 ("arm64: dts: mt2712: add pintcrl device node.")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d759c524c15dc4151e40b9e3f368147fda7b789 ]
Rename fixed-clock oscillators to oscillator-26m and oscillator-32k
and remove the unit address to fix the unit_address_vs_reg warning;
fix the unit address for interrupt and intpol controllers by
removing a leading zero in their unit address.
This commit fixes the following warnings:
(unit_address_vs_reg): /oscillator@0: node has a unit name, but
no reg or ranges property
(unit_address_vs_reg): /oscillator@1: node has a unit name, but
no reg or ranges property
(simple_bus_reg): /soc/interrupt-controller@0c000000: simple-bus
unit address format error, expected "c000000"
(simple_bus_reg): /soc/intpol-controller@0c53a650: simple-bus
unit address format error, expected "c53a650"
Fixes: 4c7a6260775d ("arm64: dts: add dts nodes for MT6779")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221013152212.416661-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bb1fbffc631064db567ccaeb9ed6b6df6342b66 ]
Alexander noted that KFENCE only expects to handle faults from invalid page
table entries (i.e. translation faults), but arm64's fault handling logic will
call kfence_handle_page_fault() for other types of faults, including alignment
faults caused by unaligned atomics. This has the unfortunate property of
causing those other faults to be reported as "KFENCE: use-after-free",
which is misleading and hinders debugging.
Fix this by only forwarding unhandled translation faults to the KFENCE
code, similar to what x86 does already.
Alexander has verified that this passes all the tests in the KFENCE test
suite and avoids bogus reports on misaligned atomics.
Link: https://lore.kernel.org/all/20221102081620.1465154-1-zhongbaisong@huawei.com/
Fixes: 840b23986344 ("arm64, kfence: enable KFENCE for ARM64")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221114104411.2853040-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d56e5c5a99ce1d17d39ce5a8260e42c2a2d7682 ]
In the initial release of the ARM Architecture Reference Manual for
ARMv8-A, the ESR_ELx registers were defined as 32-bit registers. This
changed in 2018 with version D.a (ARM DDI 0487D.a) of the architecture,
when they became 64-bit registers, with bits [63:32] defined as RES0. In
version G.a, a new field was added to ESR_ELx, ISS2, which covers bits
[36:32]. This field is used when the Armv8.7 extension FEAT_LS64 is
implemented.
As a result of the evolution of the register width, Linux stores it as
both a 64-bit value and a 32-bit value, which hasn't affected correctness
so far as Linux only uses the lower 32 bits of the register.
Make the register type consistent and always treat it as 64-bit wide. The
register is redefined as an "unsigned long", which is an unsigned
double-word (64-bit quantity) for the LP64 machine (aapcs64 [1], Table 1,
page 14). The type was chosen because "unsigned int" is the most frequent
type for ESR_ELx and because FAR_ELx, which is used together with ESR_ELx
in exception handling, is also declared as "unsigned long". The 64-bit type
also makes adding support for architectural features that use fields above
bit 31 easier in the future.
The KVM hypervisor will receive a similar update in a subsequent patch.
[1] https://github.com/ARM-software/abi-aa/releases/download/2021Q3/aapcs64.pdf
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-4-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 0bb1fbffc631 ("arm64: mm: kfence: only handle translation faults")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de1172624b3c4ca65730bc34333ab493510b3e1 ]
SM6125 comes with SDCC (SDHCI controller) v5, so the second range of
registers is cqhci, not core.
Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # Sony Xperia 10 II
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026163646.37433-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb9f23e46ddcebe1bc68a43a0f7acfc1865a6472 ]
The QMP pipe clock is used by the USB part of the PHY so drop the
corresponding properties from the DP child node.
Fixes: 5aa0d1becd5b ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221026152511.9661-2-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3c7839b698cc617e97dd2e4f1eeb4adc280fe58 ]
The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.
As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.
Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-4-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f8b37dd4e7bf50160529530d9789b846153df71 ]
The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.
As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.
Fixes: b7e2fba06622 ("arm64: dts: qcom: sm8250: Add UFS controller and PHY")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-3-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36a31b3a8d9ba1707a23de8d8dc1ceaef4eda695 ]
The sizes of the UFS PHY register regions are too small and does
specifically not cover all registers used by the Linux driver.
As Linux maps these regions as full pages this is currently not an issue
on Linux, but let's update the sizes to match the vendor driver.
Fixes: 3834a2e92229 ("arm64: dts: qcom: sm8150: Add ufs nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221024091507.20342-2-johan+linaro@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1351512f29b4348e6b497f6343896c1033d409b4 ]
Many child nodes of QMP PHY are named without following bindings schema
and causing dtbs_check warnings like below.
phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$'
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
Correct them to fix the warnings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
Stable-dep-of: 36a31b3a8d9b ("arm64: dts: qcom: sm8150: fix UFS PHY registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff02ac621634e82c0c34d02a79d402ae700cdfd0 ]
MSM8916 was originally using the "qcom,q6v5-pil" compatible for the
MSS remoteproc. Later it was decided to use SoC-specific compatibles
instead, so "qcom,msm8916-mss-pil" is now the preferred compatible.
Commit 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific
compatibles to SCM/MSS") updated the MSM8916 device tree to make use of
the new compatible but still kept the old "qcom,q6v5-pil" as fallback.
This is inconsistent with other SoCs and conflicts with the description
in the binding documentation (which says that only one compatible should
be present). Also, it has no functional advantage since older kernels
could not handle this DT anyway (e.g. "power-domains" in the MSS node is
only supported by kernels that also support "qcom,msm8916-mss-pil").
Make this consistent with other SoCs by using only the
"qcom,msm8916-mss-pil" compatible.
Fixes: 60a05ed059a0 ("arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220718140344.1831731-2-stephan.gerhold@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d440d811e6e2f37093e54db55bc27fe66678170 ]
Fix Adreno OPP table according to the msm-3.18. Enable 624 MHz for the
speed bin 3 and 560 MHz for bins 2 and 3.
Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-7-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0154caaa2b748e7414a4ec3c6ee60e8f483b2d4f ]
Adjust MSM8996 cpufreq tables according to tables in msm-3.18. Some of
the frequencies are not supported on speed bins other than 0. Also other
speed bins support intermediate topmost frequencies, not supported on
speed bin 0. Implement all these differencies.
Fixes: 90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-5-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8898c9748a872866f8c2973e719b26bf7c6ab64e ]
Qualcomm MSM8996 Pro is a variant of MSM8996 with higher frequencies
supported both on CPU and GPU. There are other minor hardware
differencies in the CPU and GPU regulators and bus fabrics.
However this results in significant differences between 8996 and 8996
Pro CPU OPP tables. Judging from msm-3.18 there are only few common
frequencies supported by both msm8996 and msm8996pro. Rather than
hacking the tables for msm8996, split msm8996pro support into a separate
file. Later this would allow having additional customizations for the
CBF, CPR, retulators, etc.
[DB: dropped all non-CPU-OPP changes]
Fixes: 90173a954a22 ("arm64: dts: qcom: msm8996: Add CPU opps")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: Realigned supported-hw to keep compat with current cpufreq driver]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724140421.1933004-3-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
