IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
[ Upstream commit 8d8be8dd7c1f5d50f84ecc7a6a41962da48c6164 ]
The remoteproc configuration in qcom-msm8974.dtsi is incomplete because
it lacks the regulator supplies that should be added in the board DT
files. Some of the msm8974 boards are currently missing the regulator
supplies and should have the remoteprocs disabled to avoid making use
of the incomplete configuration.
This also fixes dtbs_check warnings after moving "qcom,msm8974-mss-pil"
to DT schema, which rightfully complains that the -supply properties
are missing for some boards:
qcom-apq8074-dragonboard.dtb:
remoteproc@fc880000: 'pll-supply' is a required property
From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'mss-supply' is a required property
From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'oneOf' conditional failed, one must be fixed:
'power-domains' is a required property
'power-domain-names' is a required property, or
'cx-supply' is a required property
'mx-supply' is a required property
Cc: Luca Weiss <luca@z3ntu.xyz>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: f300826d27be ("ARM: dts: qcom-msm8974: Sort and clean up nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712124421.3129206-4-stephan.gerhold@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb9e93937756a05787977875830c0dc482cb57e0 ]
Replace gcc PXO phandle to pxo_board fixed clock declared in the dts.
gcc driver doesn't provide PXO_SRC as it's a fixed-clock. This cause a
kernel panic if any driver actually try to use it.
Fixes: 40cf5c884a96 ("ARM: dts: qcom: add L2CC and RPM for IPQ8064")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220430055118.1947-2-ansuelsmth@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c0919acb3fa7c1a24e384ff912f2d88f060c373 ]
The STMPE MFD device binding requires the child node to have a fixed
name, i.e. with '_', not '-'. Otherwise the stmpe_adc, stmpe_touchscreen
drivers will not be probed.
Fixes: 56086b5e804f ("ARM: dts: imx6qdl-apalis: Avoid underscore in node name")
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32f054fef145878c5331f9dd343014970a15ebfa ]
Correct CAN controller comment. It is a MCP2515 rather than a mpc258x.
Fixes: 66d59b678a87 ("ARM: dts: imx7-colibri: add MCP2515 CAN controller")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ef1969ea5699b00394e1a8c8c7f927b2d0bc5bb ]
Move aliases, chosen, extcon and gpio-keys to module-level device tree
given they are standard Colibri functionalities.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5d2974652c96935d94301af6eaf6b3585ab330 ]
The pin GPIO1_IO01 externally pulls down, it is required to sequentially
connect this pin (signal WAKE_MICO#) to +3v3 and then disconnect it to
trigger a wakeup interrupt.
Adding the flag GPIO_PULL_DOWN allows the system to be woken up just
connecting the pin GPIO1_IO01 to +3v3.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbeb8e72cc51536a70313e6d523dcb1429b40477 ]
Rename display interface to match other modules to make it easier to
use device tree overlays.
The parallel RGB interface (lcdif) and all related stuff turn on in a
device tree overlay. Keep them disabled in the main devicetree.
As these subsystems are provided by module and not a part of boards,
move their definitions into the module-level devicetree.
Disable ad7879 touchscreen which turns on in a devic tree overlay.
Remains it disabled in the main devicetree.
Move Atmel MXT capacitive touch controller device tree nodes from
carrier board to module level and add iomux pinctl groups for both the
Capacitive Touch Adapter (using SODIMM 28/30) and the capacitive touch
connector as found on later carrier boards (using SODIMM 106/107).
Keep touchscreen and display nodes enabled for NAND based i.MX 7
modules, since device tree overlays are not yet supported. For the
Colibri Evaluation Board keep the Capacitive Touch Adapter node
disabled and PWM2, PWM3 enabled instead.
For eMMC based modules keep nodes disabled to work in conjunction with
device tree overlays.
Add the iomuxc pinctrl group for the LVDS transceiver related signals to
use it in a device tree overlay.
While at it also alphabetically re=order them properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e24c75f02a81d6ddac0072cbd7a03e799c19d558 ]
This was fixed wrong so fix it. Now verified by using
iio-sensor-proxy monitor-sensor test program.
Link: https://lore.kernel.org/r/20220611205138.491513-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b2152e428ab91533a02888ff24e52e788dc4637 ]
This was fixed wrong so fix it again. Now verified by using
iio-sensor-proxy monitor-sensor test program.
Link: https://lore.kernel.org/r/20220611204249.472250-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 013fda41c03e6bcb3dc416669187b609e9e5fdbc ]
This was fixed wrong so fix it again. Now verified by using
iio-sensor-proxy monitor-sensor test program.
Link: https://lore.kernel.org/r/20220609083516.329281-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 935327a73553001f8d81375c76985d05f604507f ]
Meraki MR26 is an EOL wireless access point featuring a
PoE ethernet port and two dual-band 3x3 MIMO 802.11n
radios and 1x1 dual-band WIFI dedicated to scanning.
Thank you Amir for the unit and PSU.
Hardware info:
SOC : Broadcom BCM53015A1KFEBG (dual-core Cortex-A9 CPU at 800 MHz)
RAM : SK Hynix Inc. H5TQ1G63EFR, 1 GBit DDR3 SDRAM = 128 MiB
NAND : Spansion S34ML01G100TF100, 1 GBit SLC NAND Flash = 128 MiB
ETH : 1 GBit Ethernet Port - PoE (TPS23754 PoE Interface)
WIFI0 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn (3x3:3)
WIFI1 : Broadcom BCM43431KMLG, BCM43431 802.11 abgn (3x3:3)
WIFI2 : Broadcom BCM43428 "Air Marshal" 802.11 abgn (1x1:1)
BUTTON: One reset key behind a small hole next to the Ethernet Port
LEDS : One amber (fault), one white (indicator) LED, separate RGB-LED
MISC : Atmel AT24C64 8KiB EEPROM i2c
: Ti INA219 26V, 12-bit, i2c output current/voltage/power monitor
SERIAL:
WARNING: The serial port needs a TTL/RS-232 3V3 level converter!
The Serial setting is 115200-8-N-1. The board has a populated
right angle 1x4 0.1" pinheader.
The pinout is: VCC (next to J3, has the pin 1 indicator), RX, TX, GND.
Odd stuff:
- uboot does not support lzma compression, but gzip'd uImage/DTB work.
- uboot claims to support FIT, but fails to pass the DTB to the kernel.
Appending the dtb after the kernel image works.
- RGB-controller is supported through an external userspace program.
- The ubi partition contains a "board-config" volume. It stores the
MAC Address (0x66 in binary) and Serial No. (0x7c alpha-numerical).
- SoC's temperature sensor always reports that it is on fire.
This causes the system to immediately shutdown! Looking at reported
"418 degree Celsius" suggests that this sensor is not working.
WIFI:
b43 is able to initialize all three WIFIs @ 802.11bg.
| b43-phy0: Broadcom 43431 WLAN found (core revision 29)
| bcma-pci-bridge 0000:01:00.0: bus1: Switched to core: 0x812
| b43-phy0: Found PHY: Analog 9, Type 7 (HT), Revision 1
| b43-phy0: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
| b43-phy0 warning: 5 GHz band is unsupported on this PHY
| b43-phy1: Broadcom 43431 WLAN found (core revision 29)
| bcma-pci-bridge 0001:01:00.0: bus2: Switched to core: 0x812
| b43-phy1: Found PHY: Analog 9, Type 7 (HT), Revision 1
| b43-phy1: Found Radio: Manuf 0x17F, ID 0x2059, Revision 0, Version 1
| b43-phy1 warning: 5 GHz band is unsupported on this PHY
| b43-phy2: Broadcom 43228 WLAN found (core revision 30)
| bcma-pci-bridge 0002:01:00.0: bus3: Switched to core: 0x812
| b43-phy2: Found PHY: Analog 9, Type 4 (N), Revision 16
| b43-phy2: Found Radio: Manuf 0x17F, ID 0x2057, Revision 9, Version 1
| Broadcom 43xx driver loaded [ Features: NL ]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c6cf86e1ab433b2d421880fdd9c6e954f404948 ]
imx6ul is not compatible to imx6sx, both have different erratas.
Fixes the dt_binding_check warning:
spi@21e0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-qspi', 'fsl,imx6sx-qspi'] is too long
Additional items are not allowed ('fsl,imx6sx-qspi' was unexpected)
'fsl,imx6ul-qspi' is not one of ['fsl,ls1043a-qspi']
'fsl,imx6ul-qspi' is not one of ['fsl,imx8mq-qspi']
'fsl,ls1021a-qspi' was expected
'fsl,imx7d-qspi' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a884d17ca324531634cce82e9f64c0302bdf7de ]
In yaml binding "fsl,imx6ul-lcdif" is listed as compatible to imx6sx-lcdif,
but not imx28-lcdif. Change the list accordingly. Fixes the
dt_binding_check warning:
lcdif@21c8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-lcdif', 'fsl,imx28-lcdif'] is too long
Additional items are not allowed ('fsl,imx28-lcdif' was unexpected)
'fsl,imx6ul-lcdif' is not one of ['fsl,imx23-lcdif', 'fsl,imx28-lcdif',
'fsl,imx6sx-lcdif']
'fsl,imx6sx-lcdif' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0aca931a2c7c29c88ebf37f9c3cd045e083483d ]
"fsl,imx6ul-csi" was never listed as compatible to "fsl,imx7-csi", neither
in yaml bindings, nor previous txt binding. Remove the imx7 part. Fixes
the dt schema check warning:
csi@21c4000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-csi', 'fsl,imx7-csi'] is too long
Additional items are not allowed ('fsl,imx7-csi' was unexpected)
'fsl,imx8mm-csi' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d15e0c9a515494af2e3199741cdac7002928a0e ]
According to binding, the compatible shall only contain imx6ul and imx21
compatibles. Fixes the dt_binding_check warning:
keypad@20b8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-kpp', 'fsl,imx6q-kpp', 'fsl,imx21-kpp'] is too long
Additional items are not allowed ('fsl,imx6q-kpp', 'fsl,imx21-kpp' were
unexpected)
Additional items are not allowed ('fsl,imx21-kpp' was unexpected)
'fsl,imx21-kpp' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edb67843983bbdf61b4c8c3c50618003d38bb4ae ]
operating-points is a uint32-matrix as per opp-v1.yaml. Change it
accordingly. While at it, change fsl,soc-operating-points as well,
although there is no bindings file (yet). But they should have the same
format. Fixes the dt_binding_check warning:
cpu@0: operating-points:0: [696000, 1275000, 528000, 1175000, 396000,
1025000, 198000, 950000] is too long
cpu@0: operating-points:0: Additional items are not allowed (528000,
1175000, 396000, 1025000, 198000, 950000 were unexpected)
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5655699cf5cff9f4c4ee703792156bdd05d1addf ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check
warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9b0dc7abb5cc43a2dbf90690c3c6011dcadc574d upstream.
An interrupt for USB device are shared with USB host. Set interrupt-names
property to common "dwc_usb3" instead of "host" and "peripheral".
Cc: stable@vger.kernel.org
Fixes: 45be1573ad19 ("ARM: dts: uniphier: Add USB3 controller nodes")
Reported-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It contains one fix for LAN966 based SoCs fixing the frequency of
sys_clk. sys_clk is feeding different IPs so having proper frequency
for it in DT is necessary for proper working of different drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYtgTywAKCRCejrg/N2X7
/SHHAQC7vKFPU+mWlZ0e2cGWgKyfKReZFkTbccST5g6OJwOAcAEA+sQBhdtysu2M
Ny+68ihX+4Fx7TqHBXn8iSFfcC8NsAM=
=VC5w
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VoCM
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 5.19 #3
It contains one fix for LAN966 based SoCs fixing the frequency of
sys_clk. sys_clk is feeding different IPs so having proper frequency
for it in DT is necessary for proper working of different drivers.
* tag 'at91-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: fix sys_clk frequency
Link: https://lore.kernel.org/r/20220721075705.1739915-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sys_clk frequency is 165.625MHz. The register reference of the
Generic Clock controller lists the CPU clock as 600MHz, the DDR clock as
300MHz and the SYS clock as 162.5MHz. This is wrong. It was first
noticed during the fan driver development and it was measured and
verified via the CLK_MON output of the SoC which can be configured to
output sys_clk/64.
The core PLL settings (which drives the SYS clock) seems to be as
follows:
DIVF = 52
DIVQ = 3
DIVR = 1
With a refernce clock of 25MHz, this means we have a post divider clock
Fpfd = Fref / (DIVR + 1) = 25MHz / (1 + 1) = 12.5MHz
The resulting VCO frequency is then
Fvco = Fpfd * (DIVF + 1) * 2 = 12.5MHz * (52 + 1) * 2 = 1325MHz
And the output frequency is
Fout = Fvco / 2^DIVQ = 1325MHz / 2^3 = 165.625Mhz
This all adds up to the constrains of the PLL:
10MHz <= Fpfd <= 200MHz
20MHz <= Fout <= 1000MHz
1000MHz <= Fvco <= 2000MHz
Fixes: 290deaa10c50 ("ARM: dts: add DT for lan966 SoC and 2-port board pcb8291")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220326194028.2945985-1-michael@walle.cc
The pinctrl state was lost in the recent refactoring of the MSM8974
Devicetree, this contains a fix for this.
-----BEGIN PGP SIGNATURE-----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=APeV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLOdjAACgkQmmx57+YA
GNnimQ//aKumUxDxkfgAvKhm1caZuLoFmonFPKPD0Zj4OIHGeyWtiHVQLFt+hnaO
cOvp3MUpiwkyKoezTKw9/m9gd2vuPtU4tPjoomFt63JnVZ94La1u3suPEnE8OsEN
Fk079hmJO9fnQo0FHjeWzpJ4RQNVhHzaeU25FF9Gus+CY4ZpiEONZtx56a/fb5us
0XfP+B3iNm/XZa+UxBqi4EpwkEteud/gp4eOz8eFGyJl6b36H7rdhEjKfZmQavYc
jGH6CVUWfthZsAfAcyQ7ihjzlbUPT7r72b1E/GV0Q5JDFnXtXVRp2fEgwsiQgU5s
/TUdjfDGpXERyDChMuxQhk4GqP8Vyp4cXK7je9gr1L3g1qkcbSfjWeKGL0VOg0YY
QglPp2efogv0YjTalZrWRVN7eDD6/msUqnrPFfjb4xtHF0CiKqX6Wzk4EhVFFgR5
BgSIsi1lZKkEgqg0e8E7iuNQgvMbEFU6ExwtH42bBg2N9cESNlj6gAveclijAhVj
DPFwWuXxQyrM+jGRBRJXIAVEBNfNCRVXcQ/9APLxyX6gJskv0wHFqb1G5HtRU+y+
P7I7dFPWfQEwimdYk9WK3vQrdyAj6Pc59nozRuBSOjLnjTwOPIGdrym5KjYNI+Ta
JMzf4wANaYxN5zclIG9JYeETFJkLGV0PPxA8uwFJ4ckPXhxh370=
=GNqz
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm DTS fixe for 5.19
The pinctrl state was lost in the recent refactoring of the MSM8974
Devicetree, this contains a fix for this.
* tag 'qcom-dts-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974: re-add missing pinctrl
Link: https://lore.kernel.org/r/20220713030627.1371156-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains 2 DT fixes:
- one for SAMA5D2 to fix the i2s1 assigned-clock-parents property
- one for kswitch-d10 (LAN966 based) enforcing proper settings
on GPIO pins
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYshFHwAKCRCejrg/N2X7
/QoJAP9BIE1tDoMkzB1c2+qsxzka8rksFfCnjGcF9vQYo4iSQAD+OkYXta2U+njj
UvpNgbOtLpPxswJsMpXCqhI71fpQ9gM=
=jbPC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6AX7
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 5.19 #2
It contains 2 DT fixes:
- one for SAMA5D2 to fix the i2s1 assigned-clock-parents property
- one for kswitch-d10 (LAN966 based) enforcing proper settings
on GPIO pins
* tag 'at91-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2: Fix typo in i2s1 node
ARM: dts: kswitch-d10: use open drain mode for coma-mode pins
Link: https://lore.kernel.org/r/20220708151621.860339-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The device tree should include generic "jedec,spi-nor" compatible, and a
manufacturer-specific one.
The macronix part is what is shipped on the boards that come with a
flash chip.
Fixes: 45857ae95478 ("ARM: dts: orange-pi-zero: add node for SPI NOR")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220708174529.3360-1-msuchanek@suse.de
Fix typo in i2s1 causing errors in dt binding validation.
Change assigned-parrents to assigned-clock-parents
to match i2s0 node formatting.
Fixes: 1ca81883c557 ("ARM: dts: at91: sama5d2: add nodes for I2S controllers")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
[claudiu.beznea: use imperative addressing in commit description, remove
blank line after fixes tag, fix typo in commit message]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220707215812.193008-1-Ryan.Wanner@microchip.com
The driver use the coma-mode pins as open-drain. Flag them in the device
tree accordingly. This avoids the following error:
[ 14.114180] gpio-2007 (coma-mode): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Fixes: 46a9556d977e ("ARM: dts: kswitch-d10: enable networking")
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220704150808.1104295-1-michael@walle.cc
A pin controlled by the iomuxc-snvs pin controller must be
specified under the dtb's iomuxc-snvs node.
Move the one and only pin of that category from the iomuxc node
and set the pinctrl-0 using it accordingly.
Fixes: 2aa9d6201949 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The USBH composed of EHCI and OHCI controllers needs the PHY clock to be
initialized first, before enabling (gating) them. The reverse is also
required when going to suspend.
So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL
gets enabled 1st upon controller init. Upon suspend/resume, this also makes
the clock to be disabled/re-enabled in the correct order.
This fixes some IRQ storm conditions seen when going to low-power, due to
PHY PLL being disabled before all clocks are cleanly gated.
Fixes: 949a0c0dec85 ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c")
Fixes: db7be2cb87ae ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Delete the node fixed clock managed by secure world with SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
LSE clock is provided by SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The peripheral clock of CEC is not LSE but CEC.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR
regulators through SCMI service. This is needed since enabling secure
only access to RCC clock and reset controllers also enables secure
access only on PWR voltage regulators reg11, reg18 and usb33 hence
these must also be accessed through SCMI Voltage Domain protocol.
This change applies on commit [2] that already corrects issues from
commit [1].
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: [1] https://lore.kernel.org/linux-arm-kernel/20220422150952.20587-7-alexandre.torgue@foss.st.com
Link: [2] https://lore.kernel.org/linux-arm-kernel/20220613071920.5463-1-alexandre.torgue@foss.st.com
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
- Fix the SDIO description for imx7d-smegw01 board to ensure there is
no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
based boards to leave reserved bits untouched.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmK7tGoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6gQQgAsaOPV6XCcWJCf+BAJkZvk8ba4Q4C
F/fZHnqbXFUeQqjMckVv1b9UlGLw2uNeWoW0FfQ/p8WV+uDLIlpp19wpvJHKkTM1
U1zIBK0RdJiUrngfCrOedZwHmzg11D3aVn0gotEPbW+S+aXXcW5GXH0Tt2Z/v5mF
hKIxqW1KE+OUpCAoNIehgImFjKjS8fFX4vxMQ81bkdp9iLTNc6kvsHivyXk1wS2F
E5CmaWPlPGHjaKXWvUnh8rO2QstRNTZpYe1FbCheRGBcfT2U6VFPAMYc9EJNM64d
UKSHOsT4l+7D7Jk8CMMYftBII21fwX+Qs3PepE/rnND3WYygH09iFOHNDA==
=6inj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZOsU
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.19, round 2:
- Fix the SDIO description for imx7d-smegw01 board to ensure there is
no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
based boards to leave reserved bits untouched.
* tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
arm64: dts: imx8mp-venice-gw74xx: correct pad settings
arm64: dts: imx8mp-evk: correct I2C3 pad settings
arm64: dts: imx8mp-evk: correct I2C1 pad settings
arm64: dts: imx8mp-evk: correct I2C5 pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct eqos pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct gpio-led pad settings
arm64: dts: imx8mp-evk: correct the uart2 pinctl value
arm64: dts: imx8mp-evk: correct mmc pad settings
ARM: mxs_defconfig: Enable the framebuffer
arm64: dts: imx8mp: correct clock of pgc_ispdwp
ARM: dts: imx7d-smegw01: Fix the SDIO description
Link: https://lore.kernel.org/r/20220629021244.GL819983@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As part of a recent cleanup commit, the pinctrl for a few uart and i2c
nodes was removed. Adjust the names and/or add it back and assign it to
the uart and i2c nodes.
Fixes: 1dfe967ec7cf ("ARM: dts: qcom-msm8974*: Consolidate I2C/UART/SDHCI")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220606160421.1641778-1-luca@z3ntu.xyz
The eeprom memories on the board are microchip 24aa025e48, which are 2 Kbits
and are compatible with at24c02 not at24c32.
Fixes: 68a95ef72cefe ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220607090455.80433-2-eugen.hristev@microchip.com
The board has a microchip 24aa025e48 eeprom, which is a 2 Kbits memory,
so it's compatible with at24c02 not at24c32.
Also the size property is wrong, it's not 128 bytes, but 256 bytes.
Thus removing and leaving it to the default (256).
Fixes: 1e5f532c27371 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220607090455.80433-1-eugen.hristev@microchip.com
